No active process levels have been found in SRM 7.0

Hi Friends,
I have activated BC set /SAPSRM/C_SC_600_000_SP04 to order the SC automatically. I went to t.code SCPR20 and active, But the activation ended with Warning messages. Below is the message shows for all log..
The table &1 was nicht assigned to (one of) your customizing object(s) (e.g. using the "Other Tables" function in the transaction SCPR3), when creating a BC Set. The activation tried to assign the table to (one of) your customizing object(s).
The following tables are involved and raised the same message..
TBRF110
TBRF110T
TBRF143
TBRF150
TBRF150T
TBRF185..
I have checked BRF configuration everything as per Jijilal Ramachandran suggested in Advance Workflow Webex session. Please give me though about this issue ..

Hello John Petre,
Can you share the Jijilal Ramachandran suggested in Advance Workflow Webex session link?
I am new to BRF WF concept,was trying to find a solution.
PLease help
Arshad

Similar Messages

QA07 - No batches have been found for processing

Hello,
I know this topic was discussed many times, but I still don't find solution for my problem.
I'm getting error "No batches have been found for processing" via QA07.
I want to move stock from unrestricted to Q-stock after SLED is expired.
These are my settings:
MM Data:
Batch master:
1.Can you please help me to find the problem?
2. Do I need to setup a job for QA07 or SAP will move automatically?
Thanks!

Hello,
Did you check this thread Deadline Monitoring ?
I believe it will help you, there are many information.
Also, from this thread: Recurring Inspection 09
"The following conditions are required to have the inspection lot created automatically when the transaction QA07 is executed.
1) Inspection type '09' should be activated.
2) Inspection plan with usage '9' should be created.
3) Total shelf life(TSL) field and inspection interval field should be maintained.
When the batch is received initially then SLED and Next inspection date(NID) are updated automatically (SLED = Manufacturing date + TSL) and (NID = Manufacturing date + Inspec. Interval). Now one catch here is that SLED always have an edge on Inspection date so Inspection date should always be kept few days lesser then TSL, otherwise as the SLED is reached first stock will be moved to block status without considering settings shown in below screen shot. Can also give the number of days prior to inspection date when the inspection lot be printed by specifying days in initial run in days."
Kind regards,
Natália

FAGLGVTR= No accounts to be processed have been found

HI Expert,
I have two company code A & B, B copy form A.
When I run FAGLGVTR (balance carryforward) at company code B for 2012. I get the message "No accounts to be processed have been found". But company code A work the tcode is fine.
How can I debug this ?
Ps.The post period is open from 2011/12 to 2012/01.

hi
firstly, you need to check whether you have copied all accounts from source company code. (fs00)
then you probably need to check the balance of previous year, if you just copy the company code, no balance is copied in fact.
(FAGLB03 - Display Balances (New) )
best regards, Lawrence

Problem with LSMW - RFBIBL00 "FI_INVOICES: No terminations have been found"

Hi experts,
Hope you can help me.
I'm trying to load open invoices into SAP from a legacy system using LSMW. I defined all the structures and finished all the step but didn't load any data. I looked at the converted data and everything looks Ok.
This is the log:
FB018                    File P2P_GRANITE_VENDORS_FI_INVOICES.lsmw.conv is being checked
FB012                    Session 1 : Special character for 'empty field' is /
FB019                    Session 1 session name FI_INVOICES : No terminations have been found
Following further information about the LSMW:
Object: 0100
Method: 0000
Program: RFBIBL00
Program Type: D
Source structures (linked by CNT field)
INV_HEAD:
Company Code (BUKRS), Fiscal Year (GJAHR), Document Type (BLART), Posting Date (BUDAT), Document Date (BLDAT), Document Header Text (BKTXT), Reference Document Number (XBLNR), Currency Key (WAERS), Count (CNT)
INV_ITEM
Posting Key for the Next Line Item (NEWBS), Account or Matchcode for the Next Line Item (NEWKO), Amount in document currency (WRBTR) , Baseline Date (ZFBDT), Cash Discount Days 1 (ZBD1T), Item Text (SGTXT), Count (CNT)
Document Type ZC or KR
Posting Key 31 and 40
Thanks in advance,
Mairo.

It looks everything fine for me.. what is ther exact error message are you getting..
However also go through my book on LSMW, it may help you.
http://www.4shared.com/document/wkl5vHpv/LSMW_SATISH.html
Satish

Whenever I try to open iPhoto, a message comes up saying that 148 photos have been found in the iPhoto Library that have not been imported. It asks me if I want to import them and I say NO but then it places them in a recovered photo folder. I keep deleti

Whenever I try to open iPhoto, a message comes up saying that 148 photos have been found in the iPhoto Library that have not been imported. It asks me if I want to import them and I say NO but then it places them in a recovered photo folder. I keep deleting the empty recovered photo files but it just keeps asking me every time I go to open iPhoto! I'd love to just get rid of the "found" photos (I can't open them anyway!)
How do I get rid of them so that I can just open iPhoto straight up without this?
Linda

Open your iPhoto Library package with the Finder.
Click to view full size
look for a folder titled Import or Importing and move it to the Desktop. Launch iPhoto to see if the message goes away. If there is no message check the contents of the Import folder to see if you want to keep any of those image files (usually they have not been imported into iPhoto). If you want to keep them then drag the folder into the open iPhoto window to import.
OT

"No configured AirPort base stations have been found." I can see the content of the TimeCapsule's drive in finder and Time Machine but it no longer is making backups. Ideas?

Bought new TimeCapsule March 2013. Worked fine. Now get "No configured AirPort base stations have been found." I can see the content of the TimeCapsule's drive in finder and Time Machine but it no longer is making backups. Ideas?

Make sure that you have AirPort Utility 6.3.1 installed on your Mac.
AirPort Utility 6.3.1 for Mac - Support - Apple
Then, power off the entire network...all devices...in any order that you want
Wait a minute, then start the modem first and let it run a full minute
Start the next device connected to the modem, which may be your Time Capsule and let it run a minute
Keep starting devices one at a time the same way until the entire network is back up
See if AirPort Utility can "see" the Time Capsule now.
If yes, try another backup. If you encounter an error message, post back with the exact message.

Photos have been found in the iPhoto Library folder that were not imported

Whenever I start iPhoto, I get an error that says:
5 Photos have been found in the iPhoto Library folder that were not imported. Would you like to import them now?
http://www.fredmccann.com/error.png
If I say no, the dialog goes away but you get it the next time you start iphoto. If I say yes, then iphoto tries to import something (I don't know what) and hangs. I've let it run for two hours and nothing ever gets imported. What's worse is that every time I try to let it import, it increments the number of pictures it thinks is missing. The first time it said 3 photos. I let it attempt an import and it froze. The next start it claimed there were 4. It's up to 5 now and I've figured out that letting it try to import whatever it thinks is missing is a bad idea.
Has anyone seen this problem before? Any suggestions?
iBook G4 Mac OS X (10.4.8)

booleanman:
Welcome to the Apple Discussions. This Apple KB document may have the solution to your problem: Unimported photos found in Library when iPhoto is launched.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

Not clearable : 1 distinct types of ORA- errors have been found in the alert log.

( Correct me if I'm wrong.)
What could be the reason for the fact that the event "1 distinct types of ORA- errors have been found in the alert log." is not clearable?
Even if the problem is solved, the ORA- error will still be in the alert.log.
Therefore the event would eventually only disappear after 7 days.
Doesn't sound very logical to me.

- The event page showing a warning event for "Generic Alert Log Error Status" metric,
- "Generic Alert Log Error Status" event is a statefull metric,
- On each evaluation of the metric defined as 'Statefull', the Cloud Control Agent recalculates the severity,
- This means, EM Agent scans the alert log for ORA errors, "Generic Alert Log Error Status" will return the number of ORA error found,
- Whenever the returned number is grater than the assigned thresholds of "Generic Alert Log Error Status", an alert is raised on EM console,
- On the next scan of alert log file, this alert will be cleared ONLY if the collected value is less than the assigned threshold,
- By checking your system, the warning threshold of "Generic Alert Log Error Status" is 0, so whenever a single ORA error is found in alert log, a warning event will be raised and you will not be able to clear it manually as this is a stateful metric.
There are three cases where this alert can be cleared:
1. The agent found 0 ORA errors in Alert log, then the alert will be cleared automatically
2. Manual clear: By disabling/enabling the metric
3. Manual clear and further not receiving similar alerts frequently: By assigning higher thresholds values
So, I suggest to disable the metric, then, enable it after some time as follows as follows:
- Go to the problematic database home page >> open the 'Oracle Database' drop-down menu >> 'Monitoring' >> 'Metric and Collection Settings',
- Choose 'All metrics' from the 'View' drop-down list >> search for the 'Generic Alert Log Error Status' metric,
- Click the pencil icon under 'Edit' column opposite to the above metric >> remove the Warning Threshold (make it empty) >> 'Continue' >> 'OK'.
- Wait for the next collection schedule in order for the warning events to be cleared, then, enable the metric again with the same steps (setting Warning Threshold=0).
References:
Note 604385.1 Receiving "Clear" Notifications Unexpectedly for 'Generic Alert Log Error Status' Metric
Note 733784.1 What are Statefull and Stateless Metrics in Enterprise Manager - Explanation and Example
HTH
Mani

"Photos have been found in iPhoto library that were not imported" .. There's no Import Folder to delete

Please read the entire post prior to giving a response.
Our 2011 MBP has had this problem for a while. 15 photos have been found in iPhoto library that were not imported (twice .. every time). I've seen several posts that all have the same answer .. find the import folder in iPhoto, remove it and all will be fine with the world. Some say, it's importing folder, some say auto import folder, but all say it's a folder. Problem is, there is no such folder. I've looked throughout the computer .. applications, iPhoto, right click to show package contents, searched and searched .. nada. NO such folder exists. There are quite a number of files labeled "ImportPanels.nib" and "SelectiveImport.nib" all under "Other". There are also a number of import.tiff files with various names under "Preview". But NO folder with IMPORT in the name.
So, how do I get rid of the never ending 15 photos have been found in iPhoto library that were not imported? Help that doesn't repeat what's already been noted above in other posts would be greatly appreciated. Thanks.
(BTW .. it has Mavericks installed and everything is currently updated.)

I have no idea where you are looking. I have nothing even similar to that. When I go to Finder and click on Applications and then right click iPhoto (not iPhoto Library .. I have nothing with that name) and click on Show Package Contents, I have just one folder "Contents". That opens to _CodeSignature, _MASReceipt, Frameworks, Library, MacOS, Plugins, Recurces and XPCServices .. no other folder exist.
(I have show .. iMovie, iMovie 9.0.9, iPhoto, iTunes, iWork '09, Keynote, etc .. No iPhoto Library Folder is listed.)
If I go to Launchpad and right click the iPhoto icon, it opens iPhoto. You say not the application, but I have no idea were else to find this other than Finder which is only the iPhoto application and the icon in Launchpad and the Dock.
When I click the Library folder, the only folder is Loginterms which opens to iCloud Photos.
There isn't any folder names Auto Import or anything close. Searches don't help as they only find files, not folder names.
In your picture, it shows iPhoto Library as the header .. mine never shows that, it's always the folder name.
Where is the iPhoto Library Package?

No configured Airport Base Stations Have Been found-but we are connected?

Okay,
Here is an odd one...actiontec DSL Modem/Router with Airport Extreme. I applied the update, and was having problems with my external hard drive being recognized, so I reset everything-modem and airport. Now that I have, when I launch the Airport Utility, I get a message that no configured airport base stations have been found. Weird thing is I am connected, transfering files, etc. I just cant access my airport to set up my printer and time machine capsule...any suggestions?

My Mac was working perfectly fine till about a week ago.It would not connect to the internet or anything.I swapped my computer out clean and still nothing so i gave up since I am new to the Mac. The next morning i turned it on and it worked perfectly fine. That night it started disconnecting me from the web every 5-10 mins but the funny thing was it kept saying i was connected to the internet. I have to keep turning off and back on my Wi-fi for it to work right & even doing that does not solve the problem. I went to my time machine to try to system restore my computer to an earlier date and it does not work.The airport utility comes up and says no configured airport base stations have been found.Airport utility will continue searching. I have no clue what Airport Utility even is when i got my computer furnished threw the college I was going threw at the time everything was already set up on it. The Wi-fi connected instantly. I have a MacBook Pro (OSX) with this software OS Lion. I don't have the money to get it professionally fixed so trying fix this issue on my own. Would a factory reset solve the problem?.

Reposting: x3300 M4 "No usable Disks have been Found" Error

This post was originally posted on IBM’s developerWorks public forum (https://www.ibm.com/developerworks/community/forums/html/topic?id=1715756f-944a-417c-978c-aad561700e... The following is a summary of the post issue and the response.
Issue:
I receive the error "No Usable Disks have been Found” when I try to install CentOS 6 on a fresh System x3300 M4 system.
Response:
The Community Enterprise Operating System (CentOS) is not an officially supported version of OS for a Lenovo x3300 M4 server so you will need to try a compatible version. See the following link for details.
http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/nos/matrix.shtml

@gj I have perfectly rebooted 3 times in a row with adding vmalloc=256M. Thank you for that information... But I don't know how to make it permanent. I will try to figure that out Thanks again
Got it Thank you all
Last edited by thedeli (2012-10-24 13:22:14)

RW-20019 No install actions have been found

Hi,
I am trying to install 12.1.1 on my RHEL 32 bit server.
It is not accepting the hostname.
How can I configure this properly?
Please check the below error while running rapidwiz.
"RW-20019 No install actions have been found for this machine. Continue on other
Uninstalled machines in your configuration, or fix the configuration file to correctly call out this machine"
Thanks,
Kavitha

Hi,
It is not accepting the hostname.
How can I configure this properly?What do you mean by not accepting?
What does "hostname" return?
Do you have proper entry in the hosts file?
Please check the below error while running rapidwiz.
"RW-20019 No install actions have been found for this machine. Continue on other
Uninstalled machines in your configuration, or fix the configuration file to correctly call out this machine"At what stage/step you get this error?
Thanks,
Hussein

RW-20019: No install action have been found

i m using windows server 2008 enterprise(64bit) at both end, i successfully installed DB in 1st node i.e. DB Server, also copy the conf_SID.txt file to 2nd node i.e. Application server, i browse the config file that i hav copied from DB Node but it gives this error "RW-20019 No install actions have been found for this machine. Continue on other
Uninstalled machines in your configuration, or fix the configuration file to correctly call out this machine"
also host files on both Node configured correctly and both machines are connected to same domain, can ping each other with complete hostname and IP address
Note: both machines are on Virtual Environment.
thanks

818389 wrote:
i m using windows server 2008 enterprise(64bit) at both end, i successfully installed DB in 1st node i.e. DB Server, also copy the conf_SID.txt file to 2nd node i.e. Application server, i browse the config file that i hav copied from DB Node but it gives this error "RW-20019 No install actions have been found for this machine. Continue on other
Uninstalled machines in your configuration, or fix the configuration file to correctly call out this machine"
also host files on both Node configured correctly and both machines are connected to same domain, can ping each other with complete hostname and IP address
Note: both machines are on Virtual Environment.You cannot install EBS R12 in Windows 64-bit directly and you will need to install it on 32-bit then migrate to 64-bit.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
Migrating Oracle E-Business Suite R12 to Microsoft Windows Server 2008 R2 [ID 1188535.1]
Thanks,
Hussein

"no wireless mice or trackpads have been found"

I updated my itunes program on my imac and after that, when I start the computer, mac OS X will not start.
It may be a coincidence.
I can't get past the message "no wireless mice or trackpads have been found". The problem is, I don't even use a wireless mouse or trackpad. It looks like the computer does not see my corded mouse and keypad.
I restarted the computer without any devices attached to it, disconnected the mouse and trackpad. It does the same thing.
It would not start in safe mode or single user mode.
I booted it from my original install disc. Disc utility says volume needs repair, but it does not let me repair it. It says error on exit. It gets more and more complicated.
I did not do any backups and I would like to save some files.
I tried to move these files to an external disc, but disc utility does not let me.
Can anybody help?

Wow. Would never have believed that was possible (that's why I didnt consider it...). It appears that indeed the software update itself fried the mouse. The same mouse whose last click was to click the "Restart" button on the software update dialog. A different iMac won't recognise it either, and the mouse from that Mac breaks the endless loop from the Bluetooth Setup Assistant. Looks like I need to find a new mouse, I wonder if I can still find one with a wire...
Any thoughts on whether this was pure blind coincidental failure, or is there some way a restart itself could damage a mouse somehow??? Hard to imagine the software did it per se, so perhaps it was one final reboot that broke the camel's mouse's back?
Thanks, Linc.

No configured airport base stations have been found

I just purchased a new Time Capsule and tried to set it up according to the included instructions. After the initial set up Airport Utility give the following error message: "No configured AirPort base stations have been found. The only way I can connect to the Internet is wirelessly with a Verizon MiFi wireless modem. Could this be the problem? If so, is there a way to configure the TimeCapsule as a backup only drive?

I think.. you will get nowhere fast using v6 utility.. you must use the older utility.. 5.6.
Apple have so dumbed down v6 as to make it useless.
There are plenty of posts about how to install 5.6 under ML. I don't think it is that hard.
Download the 5.6 dmg.. open the pkg.. then extract the files from the pkg.
There is a free utility to do this.. as well as shareware Pacifist.
http://www.timdoug.com/unpkg/
Simply load the files manually and then run it..
I am about to try it myself but confess it has not yet happened.
Make sure the TC is different IP range to the main router..
Set static IP in the computer and it must work. By all the TCP/IP I have ever learned it has to be available to the computer.. but I will test myself.

No active process levels have been found in SRM 7.0

Similar Messages

Maybe you are looking for