No add on for zone alarm

Hello, there is no add on for Zone Alarm Extreme Security!
Why is this?
Was very useful. Gone back to IE 9, as this browser supports this.
Thanks, Burlingandmending.

http://www.roboform.com/download
http://www.roboform.com/support/news
Why downgrade when Roboform got their act together and now supports Firefox 7.0

Similar Messages

Droid 4 how do you add sounds for the alarm.

How do you add sounds for the alarm on the Droid 4. I do not like any of the alarm clock sounds.

In your internal storage of the phone, create a folder called alarms. Then copy or move the audio files to that folder.
You might need to download a file explorer application from the Android Market.
If the alarms in the root of storage doesn't work. Create a media folder, then a audio folder in that folder and then move the alarms folder in that folder.
Or the simplest route, download the app called Ringdroid. You can use that application to set sounds as various ringtones types.

Where can I get a copy of Firefox 5 to use while waiting for zone alarm to be compatible with Version 6

Zone Alarm is not yet compatible with Firefox 6 so I want to go back to Firefox 5 temporarily so I can continue to use Firefox. I can't seem to download Version 5 - where can I get a copy to use temporarily?

ftp://ftp.mozilla.org/pub/firefox/releases/
all the versions
edit: replaced unofficial download site link.

I have to turn off ZOne ALarm web security for Firefox to open properly

I have Firefox 5.0 and Zone Alarm Extreme Security (10.0.246.000). When I open Firefox I get the welcome screen, as if I have just downloaded Firefox (no home page and no bookmarks - options are set at default). So, I close the browser and disable Zone Alarm Web Security and reopen Firefox. My home page and bookmarks load properly, options as previously set. I turn on ZA Web Security and all is fine until I close Firefox - then I have to do this all over again.

P.S. This copy of a post by BadK_FFox (from last week) may also help:
https://support.mozilla.com/en-US/questions/840168<br>
Firefox 5 will not start with Zone Alarm Ver 10.0.240.000<br>
'''Quote:'''
I'm running Win7 x64 with ZoneAlarm Extreme Security 10.0.241.000
I had the same problem with Firefox 4. After turning off ForceField Toolbar, it started working fine.
Then I updated to Firefox 5 and it wouldn't start, instead it was showing an error message from ZA...
I searched mozilla support and followed the instructions here: http://kb.mozillazine.org/Browser_will_not_start_up on the topic"Firefox does not start after updating with ZoneAlarm ForceField enabled".
The correct instructions for this ZA version should be: "Internet -> Web Security -> Settings, and click Clear Virtual Data"
After that I could open Firefox again! Then I realized it was still version 4... I installed the update, and everything went smooth. Checked again if Forcefield toolbar was inactive (it was) and opened a few pages, closed Firefox and opened again. After a while it wouldn't open...
AGAIN the "Clear Virtual Data" did the trick...
This time I clicked on Settings (next to "Clear Virtual Data") -> Advanced Settings, and turned off "Enable Virtualization".
Until ZA get a fix for this, either we turn it off or clear virtual data every few moves...

Hi I have installed Firefox 4.0 i got information that Firefox 4.0 don´t support my firewall Zone Alarm seco

Firefox 4.o gave me the information that it doesn´t support this files and further more it doesn´t suppurt microsoft.net framwork assistent 1.2.1 either.
I have XP service package 3 as my plattform.
Now i have removed Firefox 4.0 from my computer, could and should i reinstall Firefox 3.6.16.1 to get firefox at all?
With warm regards
Carl-Rune

Until Zone Alarm updates it won't be compatible. You do have an old version of Microsoft.net Framework. The most current is for 3.5, you can update your Firefox Add-on here: [http://www.microsoft.com/downloads/en/details.aspx?FamilyID=cecc62dc-96a7-4657-af91-6383ba034eab&displaylang=en Update to .NET Framework 3.5 SP1 for the .NET Framework Assistant 1.0 for Firefox ]
You can actually have both 4.0 and 3.6 on your computer at the same time (unlike Internet Explorer). If you want to keep 4.0 until Zone Alarm is supported, just go to [http://www.mozilla.com/en-US/firefox/all-older.html Firefox 3.6], download and run the installer. Click Next on the first screen the select the Custom radio button, Next. In the Destination Folder box just rename "Mozilla Firefox" to "Mozilla Firefox 3.6", Next. The next screen is for where you want the icons, deselect where you don't want the shortcut to appear, Next. The next screen is where it'll add it to your Start Menu, just click Next, then you can click Install if you want 3.6 to be your default browser (just deselect the box if you don't). That's it! If you want to remove 4.0, just go to Add/Remove in your Control Panel and uninstall it but keep your personal files.

Firefox has become a bloody nightmare!!- what on earth have you done at the update?! how do i stop any 'new' opened tab opening as 'zone alarm'??!!!

I have had to reset my homepage to my regular one (msn.com) as Firefox suddenly put 'zone alarm' into my home page (default ) and also the search bar (instead of Google). I have reset the Google in the search bar, and have reset my homepage to www.msn.com - yet, despite this, every single time a new tab is opened low and behold it opens up as the Zone Alarm home page.
I either need to solve this immediately, or Firefox, you're history on my laptop. Utter trash !!!

Do you have ZoneAlarm software installed?
If that is the case then you need to check this in that software or contact ZA for support.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved

Zone Alarm Extreme compatibility

Who is responsible for compatibility between Firefox Browser and Zone Alarm Extreme?
Zone Alarm as yet only supports Firefox up to and not including Firefox 6 and 7. ie Firefox 5 is ok.
The site check in the toolbar does not work.
I do not like this constant update of Firefox because Zone Alarm is slow to respond.

There is no scheduled release yet for the update according to this thread: [http://forums.zonealarm.com/showthread.php?t=77781 Firefox 6 support - ZoneAlarm User Community].
Because Firefox is several security updates behind, you have a difficult choice between losing your ZoneAlarm add-on features and running a secure browser ([http://www.mozilla.org/security/known-vulnerabilities/firefox.html Security Advisories for Firefox]). It's your call, but I recommend upgrading the browser.
When Firefox disables an add-on, it usually is because it includes a list of compatible Firefox versions and it hasn't yet been updated for Firefox 7. If it works on Firefox 5, there is a reasonable chance it will work on Firefox 7, but no guarantee. This is something you could search about before going to the next step.
You can force Firefox to ''ignore'' add-on version restrictions by (what else) installing an add-on. Then you can test whether the add-ons important to you actually work in Firefox 5.
[https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ Add-on Compatibility Reporter :: Add-ons for Firefox]
After you install this add-on and restart Firefox, there will still be a message that "--- is incompatible with Firefox 7.0" but the add-on will be enabled and a Disable button will appear for that entry.
Unfortunately, some add-ons really are incompatible and can cause stability issues, so please bear that in mind.

How to add more drop zones or movies in an idvd menu

I was building a dvd in idvd and ran out of drop zones to fill but I couldn't figure out how to add more drop zones.
I tried different templates but I could find none that had more than 12 drop zones.
Then I was adding movies to the main menu and idvd refused to allow more movies added when I reached 10 movies. It said that the template did not accept more movies.
I tried a few other templates and could not get it to accept more.
I don't want to add submenus because the movies being used do not lend themselves to being put into different submenus.
Is there some way to add more than the default drop zones in an idvd template and to add more movies in a menu without having to use submenus?
Thanks for any advice.

I couldn't figure out how to add more drop zones
Sorry, the templates 'are what they are'.
I don't want to add submenus because the movies being used do not lend themselves to being put into different submenus.
You need to figure out how to work with what is available.
If you want more freedom, buy Apple's Final Cut Studio and learn to use DVD Studio Pro.

7.4 upgrade causes super slow start up and won't allow Zone Alarm to open.

I recently upgraded my pc to iTunes 7.4 and until now have never had a problem with iTunes on my pc. After restarting it, it goes through the normal start up procedures until it shows my desktop image then it hangs there. After 5-10 minutes my desktop icons show up and the pc will work fine, itunes included with one exception. Zone Alarm now doesn't start up. Tried to reinstall but it still hangs in the same spot on restart and does the 'no icons's or pc use for 5+ minutes', then it's back to normal except no Zone Alarm.
Any ideas? tia.

Repairing permission daily is a complete waste of time and will not help you. In fact, repairing the disk permissions needs to only be done about 2-3 times a year at best.
You say you verified the disk but did you repair it? Did you get a message that the "disk appears to be o.k."? What kind of install did you do? My guess is you did an archive and install.
Onyx is a troubleshooting tool and should not be used on a regular basis for anything. Caches do not need to be cleaned on a regular basis and everything else Onyx and similar utilities claim to do are handled by the system automatically. Do not use these utilities unless you are having a problem.
My guess is you have a serious problem with file corruption.
Have you tried creating a new account? Try that and see if the problem follows to the new account or not.

Previous version of Firefox killed Zone Alarm - has this problem been corrected?

While installing the previous version update of Firefox it showed a box on the screen saying it had found an incompatible file in Zone Alarm Ultimate Security and was deleting it. No further explanation - and no way for me to say 'yes' or 'no'. Sure enough, the ZA panel showed that I was not protected. Unacceptable. Went to IE, with the MS firewall and anti virus, crossed my fingers, toes, eyes etc and got back on line. Finally managed to download Zone Alarm again - took a big chunk out of my monthly Verizon data allowance. Switched to Chrome, it plays nicely with ZA, but I would much rather use Firefox. So - has this foul-up been corrected. Is it safe to come back to Firefox? May 23, 2014

Thanks for the explanation - and I must admit, somewhat more polite than my post. I don't want to have to again go through the trauma of having to keep my firewall/anti-virus program working properly, I guess I'm stuck with Chrome.

Problem with zone alarm.

Hi everyone, this is the first time I get a Toshiba Lap top and I had a problem after installing Zone Alarm PRO edition. The module is just not starting, the icon appears but nothing else happens, I already tried with an older version and cleaning the system with Tune Up. I was checking in some forums I found some information about that Zone Alarm is not compatible with some Toshiba Satellite models (mine is L305-SP6912R).
Can some one please help me to find what is the problem, because I really need to use Zone Alarm on my LapTop.
Thanks and sorry for my bad english.

I'd say you're in the wrong forum. Try the Zone Alarm folks.
ZoneAlarm User Forum
Good luck!
(Be sure to come back here with Toshiba problems.)
-Jerry

Is there a conflict with latest version of Zone Alarm Extreme Security?

Every time I try to open Firefox, I get an error message and nothing further happens. If I close down Zone Alarm, everything is just fine. I am running Firefox 3.6.19 as later versions mess up my password software.
Error message reads: Platform Version 1.9.2.18 is not compatible with minVersion >= 1.9.2.19 maxVersion <= 1.9.2.19. I have no idea what this refers to. Please can someone help as I hate Internet Exploder!

As Miriam has helpfully pointed out, Pith Helmet is a Safari plug in. You won't find it in Applications, rather you'll see it in your home folder's Library/Application Support.
As you have now added, these difficulties are being experienced with all three browsers, then you can discount Pith Helmet as it is Safari only, but it was a relevant suggestion based on your first post. I use it to cut out a lot of the 'ad noise' you get on sites.
As Nathan has said, 10.5 should be working fine on your hardware, and agree with his fresh approach suggestion. But as you don't have the 10.5 disks to do this you need to get your own set of disks. Disks are not just software, but also have utility functions that you may require in the future. Also with Apple, legally, you must own the operating system installed. Currently you don't.
As you got the computer for free, buying a set of Retail Leopard Disks, has you still in front.
Prior to this, you could remove Firefox completely and download and install it again and see if that works properly, but that would be surprising as it appears to be some system wide defect and your thoughts about a malfunctioning Java runtime is a likely cause.

ScheduleTracking_AddIn: Error installing Outlook 2010 add-in for time reporting in calendar

Hi,
I am not sure that this is the correct forum for my question... it’s not obvious where to post.
I was looking for solutions for keeping track of calendar entries in Outlook 2010 and came across a
sample add-in contributed here:
http://msdn.microsoft.com/en-us/library/hh144973(v=office.14).aspx
The add-in has to be built using Visual Studio 2010 – which I do not have – and I was not able to load the project in Visual Studio 2010 Express.
The author of the code posted an update here
http://blogs.msdn.com/b/officedevdocs/archive/2011/07/20/starting-the-time-reporting-outlook-add-in.aspx where he provided an installation package for the add-in for users who do not have Visual Studio 2010.
The installation instructions warn to expect a dialog box displaying “Publisher cannot be verified. Are you sure you want to install this customization” and that installation can be made to proceed. I am getting the following message, instead:
Customized functionality in this application will not work because the certificate used to sign the deployment manifest for ScheduleTracking_AddIn or its location is not trusted.
Contact your administrator for further assistance.
Is there a system setting under Windows 7 to work around this? I can’t continue with installation.
Thanks,
Ross

Hi Steve,
Your suggestions were very useful! Now that I understand the problem I was able to find the right information.
The following link proved most useful:
http://blogs.msdn.com/b/vsod/archive/2012/10/08/troubleshooting-common-vsto-issues-part-2.aspx
The solution proposed in Common Error 3 solved my problem.
I have one point for others who come across this same security issue. The full error message that I obtained was:
Name: ScheduleTracking_AddIn
From: file:///C:/Temp/Time_Reporting/ScheduleTracking_AddIn.vsto
************** Exception Text **************
System.Security.SecurityException: Customized functionality in this application will not work because the certificate used to sign the deployment manifest for ScheduleTracking_AddIn or its location is not trusted. Contact your administrator for further assistance.
   at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInTrustEvaluator.VerifyTrustPromptKeyInternal(ClickOnceTrustPromptKeyValue promptKeyValue, DeploymentSignatureInformation signatureInformation, String productName)
   at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInTrustEvaluator.VerifyTrustUsingPromptKey(Uri manifest, DeploymentSignatureInformation signatureInformation, String productName)
   at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.VerifySecurity(ActivationContext context, Uri manifest, AddInInstallationStatus installState)
   at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()
The Zone of the assembly that failed was:
MyComputer
The last line is misleading as it suggests that Inclusion List Security setting needs to be configured for the
MyComputer zone, since installation was from a local drive. However, doing so did not resolve the issue. I had to enable the
Internet zone to install the add-in.

Question re Zone Alarm and WRT54G admin page display problem

First - thanks to all who posted about Zone Alarm - I was going to exchange my router this weekend - I spent an hour on the phone with tech support and she was trying to get my router updated with v9 through a roundabout way, but I kept getting an error that said my Flash could not be erased - so she thought the firware on my router was somehow corrupted. But I'm definitely going to check out the Zone Alarm idea first.
My question is - can someone tell me exactly how to disable Zone Alarm? I thought I had done so, but I guess not - I'm not very familiar with Zone Alarm. Also - I had purchased Zone Alarm about a year ago, (was using it with a Linksys wired router) and suddenly I am getting messages on restart telling me my "trial period is up" - of course I can't find my original packaging to enter a serial number (altho one is already entered and they say it's not *valid*) so I have to select an option that tells me I am no longer protected. (unless I pay another $40 to re-register it!!) Could this be part of the problem?
Final question - sorry for being such a newbie - but do I really need both Zone Alarm and the firewall in the router? ZA says it has caught thousands of attempts on my system - while it was running with my non-wireless router installed - is that a crock? Or is actually good to have both software and hardware routers? And if I do need ZA still - does it have to be disabled everytime I want to access the admin page? Then turned back on?
ugh!
thanks -
Mary

LOL - This forum is great, I've been here 5 minutes and now have some fresh perspectives on a couple of problems.
I would NOT recommend paying for ZA. What the heck were they thinking when they created their 'Zones'? They should have named it something else for one, like 'Complicated rules and policies that are guaranteed to hack up everything you try to do (and it gets even worse when you restore the settings you tweaked back to their defaults)' But I guess that's a little too long.
Marynospam: Your Windows firewall (if ur on windows) will do a pretty good job of keeping out unwanted visitors from the Internet. It will NOT stop malware from calling out! Modern day scumbags slip you a trojan that will spy, record, copy, and call them back with whatever they want from you. If you are using Microsoft Windows DO NOT TURN OFF your 3rd party firewall! Of the firewall/security vendors I have experience with, McAfee is the best. I have only used their firewall and viruscan, and don't have experience with their 'spyware' package.

Windows Media Player Extension "Add-on for this website failed to run" except for Administrator

This is on a Windows server 2008 r2. I am trying to allow users to watch help videos at a vendor site. If I remote desktop using the Administrator, I can play the videos and if I check the "manage add-ons", I see Windows Media Player as an extension.
If I remote desktop on as a "normal user" and try to view the same video, I get the error message "An add-on for this website failed to run" and if I check the "manage add-ons", Windows Media Player extension is not there. That
makes sense, since if it is not there, it won't run.
Why isn't Windows Media Player extension showing up in IE 10 on the server for anyone other than Admin? How could I make this work? If I am somehow preventing this from taking place, where would I go on the server to change that?

Hi,
Have you try adding this video website into trusted sites zone or compatibility view list?
Generally, improper security settings may casue failure to run some add-ons. So, please attempt to decrease security level for Internet Zone to check if this issue still occurs.
How do you think your issue is related to Windows Media Player extension? Based on my knowledge, Flash player plug-in can lead to the problem. Please reinstall your flash player for the current user.
Also, Please check in event log for more clues.
Andy Altmann
TechNet Community Support

No add on for zone alarm

Similar Messages

Maybe you are looking for