'No Administrator found for the task' while releasing the task in AR31

Dear Gurus,
i am facing the issue 'No Administrator found for the task' while releasing the task in AR31 while doing Mass Asset change.
Please help to provide the solution.
Many thanks.
Kumar

Dear Kumar,
error 5W141 indicates that the configuration for workflow is not in place fully.
1. SWU3 => Automatic customizing
You find the customizing of the workflow under Basis -> Business
Management -> SAP Business Workflow. There you can check the minimum
customizing for workflow:
2, Please check in transaction OAWF if the responsible users are
    assigned to the workflow tasks
    Menu path: Basic Functions
                 Assign tasks to agent
                    Correct worklist
                    Release worklist
                    Correct and release worklist
3, In addition check if the users are assigned to the workflow-tasks      in the basis-component (transaction
     PFTC).
   Menu path: Task type: TS   - Standard task
       Task     : corresponding task (e.g.8010 - correct worklist
The relevant logic is: if the system finds that the agent or user is defined, it will go straight to T-code SO01. And the user can edit the work list there.
Following is a reference notes :
            322526 Analysis for workflow problems
Regards Bernhard

Similar Messages

You cannot export the request at the movement -while releasing the request

Hi.. Experts
Today, we had message from our functional consultant that When he is trying to release the TRANSPORT REQUEST (not tasks) he is getting the error " You cannot export the request at the movement "
After 2 / 3 hours, we discovered file exists in Transport Profiel directory
" /usr/sap/trans/bin" directory Fine Name : T_OFF.ALL
After removing that file - The request releasing were happening normally.
In this juncture, Even though the issue is fixed ,
We would like to learn how this file got created and which transactions / which configurations will create this T_OFF.ALL file and stops all Transport releases
Thanks in advance
Rgds
PR

This file T_OFF.ALL has to be created manually in the bin directory to basically stop release of any transport request from all systems. No transaction creates it .
Please go through the links to get more info on this mechanism.
[is there something like NOIMPORT.<SID> but with exception list;
[http://help.sap.com/saphelp_40b/helpdata/fr/3d/ad5ad84ebc11d182bf0000e829fbfe/content.htm]

AR31 - No administrator found for the task. Msg No 5W141

When I retire an Aset thru AR31 and release I get an Error msg. No administrator found for the task. Msg No 5W141. I did search in this but it is for goods movement. But I face this while retiring an Asset. Is there any one who can giude me to resolve this issue. This is the first retirement after implimentation.

Hello Syamagari
1- Please check in transaction OAWF if the responsible users are   assigned to the workflow tasks
   Menu path: Basic Functions
                 Assign tasks to agent
                    Correct worklist
                    Release worklist
                    Correct and release worklist
2- In addition check if the users are assigned to the workflow-tasks in the basis-component (transaction PFTC).
   Menu path: Task type: TS   - Standard task
              Task     : corresponding task
3.-Also check the minimum customizing for workflow:
     SWU3 => automatic customizing
Regards
Javier

No administrator found for the task Message no. 5W141

Dear all,
i am doing asset mass changes i am not able to release my work list (AR31) it"s giving message like
No administrator found for the task Message no. 5W141
plz can any one help me following steps i followed
1.substitution for assets mass changes to substitute Dep Key
condition is asset class = 15000 and Dep area = 01
substitute with Dep key S200
for 15000 asset class actually dep key S475
2.i created work list for asset class 15000 and dep area 01
then attached my substitution
3. in AR31 here all assets status is Ready when i release work list it"s giving message same
i tried in DEV and QTY no solution
this is high priority in my project
plz Dear friends send reply
Regrds
Govind

HI Jayendra
I am having the same problem with releasing the worklist in AR31.
No administrator found for the task
please let me know the solution.
Thanks
Sharath

"No administrator found for the task" in the front end

Hi all,
My issue is, whenever approval request is raised from the front end ( JAVA WEB-DYNPRO), it triggers the workflow through the "sap_wapi_start_workflow" and when the workflow proceeds to the first level of approval, the front end application provides the approver with Approve and Reject options.
On click of approve, from the java webdynpro, the approve status is written in the container using "sap_wapi_write_container" and then a call is made to "sap_wapi_workitem_complete". Upon excution, the message line is "No administrator found for the task" and the return code is "1".
But if we do the same steps from the backend (R/3), the workitem is getting completed without any such error.
Please advice.
Thanks.

Hi Balaji,
I think I have an answer for you. This has happened with us when approving a WD java task using UWL (in our case for travel). The key is the return code of 1.
What has happened is this. The return code actually comes from the function SWW_WI_STATUS_CHANGE_NEW which is called deep in the WAPI wrapper. It means "infeasible_state_transition = 1".
This is due to the fact that after updating the container, your wapi call from web dynpro tries to change the workitem from status of "Ready" to status "Completed". This will not work.
What you will have to do is call "SWW_WI_STATUS_CHANGE_NEW" to set the status to 'SELECTED' beofre setting the item to complete.
The reason for this is that when you are executing from R3, the status change is done for you. When calling from the WD, no reservation of the workitem occurs.
Sorry about last night, I live well outside of town and the phone reception at my place is poor.
Regards
Gareth

No administrator found for the task error message

Dear all,
I got the message "No administrator found for the task" when the MSS user try to approve and overtime. When i double click on the error for details, it actually give
WF notification:work item cannot be executed message no. 5W141. As got overtime, i am using the standard task 20000460 which i already maintain the agent as general task. I am using the Agent (Default Rule) rule number 157 (Superior (chief position)).
I tested it in my development and it works, however it does not work in my production. Do i miss any setting or parameter?
My R/3 backend is 4.7 with Enterprise Portal 6.
Thanks
Regards,
Bryan

You hvae to refresh the organizational assignment and you can do it from SBWP txn ,
1.Execute SBWP.
2.On Menu clcik on Settings -
> Workflow Settings -
> Refresh Organizational Assignment .
and now you try to execute the workitem now you find see the error.

"No Administrator found for the task " ?

Hi All,
I am using a standard method "display" in my ztask . [BO - FIPP, method - dispaly]
workitem created by this task is to be delivered to "initiator".
Now, initiator has this workitem in his inbox, but whenever he tries to execute that , a message is dispalyed saying
"No Administrator found for the task " and task is NOT executed at the end.
Please suggest wat could be missing or wat could be cross checked here to resolve the matter.
Many Thanks
Regards
Priya

You're welcome Priya,
One of the major advantages of forums like these is the search functionality. If you learn how to use that in an effective way you can solve more problems in shorter amounts of time than by posting questions.
Kind regards, Rob Dielemans

No Administrator found for the task (solution in FAQ not applicable sadly)

Hi All,
I have had to build a custom work item inbox due to complex client requirements, one of which being that all tasks are declared as "General tasks", so that all users can select and work them.
Work item execution is performed using the function module SWL_WI_DISPATCH (I've also tested using SAP_WAPI_EXECUTE_WORKITEM), which sometimes returns the error 'No administrator found for the task'.
I followed the standard instructions for this error message, refreshing the org assignments, transaction SWU_OBUF etc, and this did not help the issue.
The error seems to occur within the function module RH_WI_AGENT_EXECUTE_CHECK, however according to our configuration I can see no reason why users shouldn't be allowed to execute the work item, if the org assignment has been stable for several months, all tasks are generic, and the work item status is READY. There is no rule for determining agent beyond them being "General task"s.
Does anyone have any ideas? According to the data in SWWWIHEAD I can't see any reason why execution should be failing for these work items.
Thanks

Hi there,
almoste there
The new extended eMail notification do allow a feature, which is named "Forward by eMail" (in the general settings of SWNCONFIG). And the result is, that a work item can be executed by another user-id, who is not the actual receiver of the work item.
If you looked at report RSWNWIEX you'll find out that exactly the proposed solution is in use there, having a very usuable example already in place: (check lines 155 and following)
 CALL FUNCTION 'SAP_WAPI_EXECUTE_WORKITEM'
 EXPORTING
 workitem_id = p_wi_id
 IF lv_rc <> 0 AND cl_swn_settings=>wi_forward_via_mail = 'X'.
*- require to put back if WI is selected
 CALL FUNCTION 'SAP_WAPI_ADM_WORKITEM_BACK'
 CALL FUNCTION 'SAP_WAPI_FORWARD_WORKITEM'
 EXPORTING
 workitem_id = p_wi_id
 user_id = sy-uname
 COMMIT WORK. "Needs to be done before executing again
 CALL METHOD cl_swf_run_wim_factory=>initialize( ).
 CALL FUNCTION 'SAP_WAPI_EXECUTE_WORKITEM'
That doesn't blast a security hole, as far as I see.
Using the table SWWUSERWI directly is not advisable at that time, I'd say.
Best wishes,
Florin

SAP_WAPI_DECISION_COMPLETE No administrator found for the task

Hi gurus,
I have a problem executing the FM SAP_WAPI_DECISION_COMPLETE. Everytime i run the FM, it gives the error "No administrator found for the task". But in the Workflow Logs (SWI1), there is an agent and can actually access the workitem on the business workplace of that agent. I just need to run this because the approval is triggered in WebDynpro. I've done the following things to fix it but the error still occurs:
1. Set the decision step as General. (even the standard decision gives the same error)
2. Set the workflow as General.
3. Refresh the Org. Structure thru SWUS
4. Refresh the object buffer thru SWU_OBUF.
5. Log in and out of the system after refreshing buffers
I hope somebody can help me out as soon as possible.
Thanks in advance,
Dexter

Hi Rick,
I've used SAP_WAPI_DECISION_COMPLETE a couple of times before, here's how i called the FM:
        CALL FUNCTION 'SAP_WAPI_DECISION_COMPLETE'
          EXPORTING
          WORKITEM_ID          = wa_wfm_steplog-wi_id   "----
>wi_id of the decision step
          LANGUAGE             = sy-langu
          USER                      = sy-uname
          DECISION_KEY         = ly_decision_key            "-----> 0001
          DO_COMMIT            = 'X'
        IMPORTING
          RETURN_CODE          = l_subrc
     NEW_STATUS           = new_status
        TABLES
          MESSAGE_LINES        = lt_message.
i found out that the error occurs if this FM is not executed by the Agent (approver). But even if i run this FM using a different login and key in the UNAME if the agent, it still gives the error.
Its weird because on my previous company, any user can execute this FM to update ANY decision step.
Hope you can still help me.
Thanks,
Dexter

WF Err: No administrator found for the task

Hi,
I am implementing idoc alert functionality using the program RSEIDOCA which uses the task 74508518. The problem I am facing is users are not able to open the work item from the attachment then receive in the mail.
The error thrown is No administrator found for the task.
I have tried executing the work item from SWIA and the same error persists.
I had made the task general, refershed the buffers, refreshed the Org environment, but the problem is still there.
Can any please suggest any way out.
Thanks in advance

Hi,
One more addition to the case. Upon more testing I see that problem is only coming when I try to execute work item created by some other user.
I have tried executing the work-item using SWIA , but with no success.
Thanks in advance for help.

ERROR : - No administrator found for the task

hi ppl,
I have done a work flow which will trigger whenever a purchase order is created and in that WF i a put an Activity which displays the particular purchase order in business work place. The WF is getting triggered and when i execute the work item in the business work place. in says this error No administrator found for the task what exactly is this error. can u plz help me out.

Hi Hari:
I think is because you had not define the Task Properties.
Enter to the transaction SWDD, find your activity and then enter to the Task Properties, Red button.
Select the name of your activity and then in attributes you have:
- General Task
- General Forwarding allowed
- General Forwarding not allowed
- Forwarding not allowed
Use General Task.
I hope this will work.
Best Regards,
Jessica

Account is blocked for posting, while releasing the billing doc to FI

Hi,
While releasing the document to FI, I am getting the error Account is blocked for posting .
The GL account does not contain any entry for that company code. What can be the reason of this error?
Regards
Rudra

HI,
It might sound bit different to you...................even then hava look at the following settings
Transaction Code VKOA - Check the GL Account , the system is determining on the basis of Access Sequence.
Transaction Code FS00 - Check whether the GL Account is blocked for posting or not.
Regards
Jaydip

Could not start transport control program tp while releasing the TR

Hello experts,
i have a problem if any one phase this kind of problem & if u know the solution please share to me its urgent
problem in Development system ,for this i had updated kernel , TP patch level , R3trans patch level in development and quality system , but still the problem is occurring in development system . while releasing the Transport Request this error is coming that too not in frequently some times it is happening some times it not happening ( some times its working fine )
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An
error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway
Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then
execute the command again.
please suggest me what can i do for better , how can i resolve this issue
Thanks & Regards,
Narasimha

Hello experts ,
Last one and half month on-words we are phasing some problems on STMS
while releasing the Transport Request getting this error messages on
status-bar
1. "could not start transport control program tp"
2. while importing the TR into quality system getting this error message" RFC Error :timeout during allocate/CPIC-CALL "
3.while forwarding the TR from QAS to PRD : " RFC Error :timeout during
allocate/CPIC-CALL "
after continues refreshing,we are able to release the request and importthe request into quality system. But after some time again same problem
coming
for this we did the kernel upgrade , tp , & R3trans update and STMS RE-
Configuration etc...But no use with this we got the same problem after
finishing all these workaround , but don't know what happened after 2-3
days STMS starts working fine DEV-QAS-PRD ,
Now we are in the same problem after continues refreshing,we are able torelease the request and import the request into quality system. But after
some time again same problem coming
please suggest us what could be the reason behind this & what we can do
for better

CATS - error in workflow while releasing the time entry record

Dear Experts,
I have setup the configuration for CATS with approval along with workflow. I have maintained the Entry profile and also the Approval steps.
After entering the time sheet and while releasing the record, system is prompting to enter the user id, I have entered the user id and click OK button, system is producing the following error message:
An error occurred on starting the workflow
Message no. LR365
Diagnosis
For technical reasons, the system cannot start the SAP Business Workflow.
Procedure
Contact your system administrator.
I have activated the work flow customization using Trnx SWU3.
Can some one please help me out in solving this problem.
Thanks in advance,
Regards,
Praveen

I got the solution, we have to maintain the task TS31000004 as general task in the transaction PFTC - 31000004 -> Additional Data -> Agent Assignment -> Maintain, in the next screen GOTO -> Attributes (F8), then Change the task type to General task.
Also we have to create variant by name WORKFLOW for the program RCATSB01.
The above has solved my problem.
Thanks for support.
Praveen

Error while releasing the TR

hi All,
We are facing an issue while releasing the Transport Request. The error is "No valid TM target found".
Request your valuable inputs on this.
thanks in advance
With Regards,
Lata

Hi,
is it possible for you to import request manualy on OS level. once request created, it will split up in two files, one is R & second is K, import that files manualy in usr/sap/trans/data and usr/sap/trans/cofiles directories respectively and tp import request no. client no. or you can login to the target system client 000 by using stms ->import queue--> clieck on request and import it.
The error actualy you have given is related to your target system, the request is not able to find out or got the target system.
Regards,
kiron.

'No Administrator found for the task' while releasing the task in AR31

Similar Messages

Maybe you are looking for