No AES-NI Instructions on T410 / i5 560M

Hello,
Has anyone else had issues with AES-NI instructions missing on the T410?  I just got mine, with an i5 560M, and neither TrueCrypt nor CPU-Z see the AES instructions as a capability for the chip.  I've seen very little online about this issue, so a couple of things:
1. The i5 560M definitely supports AES-NI.  Intel's site, and everyone else's, says so.  The whole i5 line does.
2. I've tried this in both 64-bit and 32-bit Windows.
3. CPU-Z definitely has support for detecting AES-NI in processors that support it.  I've even seen a screenshot of an i5 560M showing AES instructions in CPU-Z.  Mine, however, doesn't show AES support.  TrueCrypt confirms.
4. There are no settings in the BIOS pertaining to AES instructions.
This is a pretty big deal for me--AES-NI offers a huge performance benefit for those using encrypted drives through software like TrueCrypt.
I expect this is a BIOS bug, but does anyone have any other info?
Thanks!

Hello mate,
The wole i5 line doesn't support AES-NI but the 560M does.
What version of TrueCrypt are you using ? TrueCrypt support AES from the 7.0
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Similar Messages

  • Can firefox uses intel AES-NI for HTTPS sites?

    I would like to ask if current version of Firefox can used Intel AES-NI instruction to accelerate HTTPS performance? (if AES cipher is used of course)
    Or is there any quide to enable such feature? like compile with correct patched openssl library...
    If there's such option for Firefox how can I verify that it's turned on?
    Thanks a lot.

    This is the response I got back from Contentwatch/Netnanny......
    ''We do have an open bug regarding the incompatibility with FireFox 33. We ask that you use FireFox 32 until we get the issue resolved.
    https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/32.0/win32/en-US/''
    I don't know how advisable it is to go back a release though.

  • Loop-AES.. howto?

    Ok, since I have little knowledge on this matter I'm going to straight out ask [any kind souls] how I would go about getting loop-AES encryption method to work on ARCH (x86_64). I know the default ARCH kernel26 doesn't support it and was wondering what kernel does..  I think the vanilla kernel would work, though I'm not positive. Anything from the AUR, maybe, or should I build from ABS?
    And from there, I'm trying to figure out how to configure it, kinda of like LUKS with dm-crypt.. but without the dm-crypt, as I think it's another method.. as from the "System Encryption with LUKS for dm-crypt" Arch Wiki it says:
    Why LUKS for dm-crypt?
    There are either 3 or 4 rival disk encryption standards in Linux, depending on how you count them.
    The old cryptoloop is deprecated: it's old, insecure and unreliable.
    A much better version, loop-AES (http://loop-aes.sourceforge.net/), was created but, due to politics, never became favorable with the kernel developers. It's far more secure than either cryptoloop or straight device-mapper encryptions (and probably faster than any of the other 3 options), but is not user-friendly. It also requires non-standard kernel support, which ARCH's kernel26 doesn't have.
    The standard device-mapper encryption (dm-crypt) is another choice.
    LUKS essentially makes management of encrypted partitions easier. Without going into the hairy details (check out the LUKS home page if you're interested), it stores all the needed setup information on the disk itself. All you need then is the password, which can be in a separate file if you like. The Linux implementation uses dm-crypt and it can have up to eight different passwords, which can be changed or revoked easily. It is also supported by mkinitcpio in ARCH linux, which is nice.
    So... from my understanding I would have to use loop-AES by itself and without dm-crypt.. but possibly with LUKS? Wondering about this seeing as I have to go about configuring this for my new system. I'll have a root partition encrypted, home encrypted, swap encrypted, and tmp/var tmp encrypted. Not sure if loop-AES will be for all of them.
    Any tips are appreciated. My system is a x86_64, 2ghz AMD64 x2, 4GB RAM, nVidia GeForce 7150M/nForce 630M, laptop.. I'm about to do a complete re-install using the "archlinux-2009.08-netinstall-x86_64[.iso OR .img, not sure]".

    Hey, thanks a lot, these are the answers I was looking for. I'll do a few trial runs with the different methods above on fresh installs (just because that's what I'm planning). I'm going to give the loop-AES.README another [more thorough] read tonight while I'm offline. I downloaded all the bzips, sigs, patches and kernel source (just in case) to my laptop and a USB stick just so I have all my bases covered. This should be fine since I like to do things manually.
    bender02 wrote:Also I think B is not correct about not needing to build a new kernel with the loop support disabled - the instructions for loop-aes say that the compilation won't work if the loop module is compiled as a module (which it is on the arch kernel).
    B wrote:As for the loop driver: one would think it could be replaced especially if it's not integrated statically into the kernel. I never tried to build against an existing kernel, so I might be wrong indeed. But it just seems not logical to me the other way around.
    So, I should compile from source and disable the loop module in kernel, and then install loop-aes via instructional readme? *dumb*   I'm doing a fresh install with all this. I hate to ask, but B, assuming you use loop-AES, how did you go about applying it to your kernel?
    bender02 wrote:One thing that I don't know (but I think it is possible) and will be needed to have loop-aes on the root partition is to pass special mount options on grub's kernel line (so that the script in initramfs that does the mounting knows it's supposed to be loop-aes encrypted). ... err... now that I think about it, the 'mount' program in initramfs might not be the one that comes from util-linux-ng (which would be OK), but a different one... I need to check. Oh well. On the other hand, the loop-aes README has quite good instructions on how to build your own initramfs (ie not using mkinitcpio) that does the job, so you might want to go with that and disregard the beginning of this paragraph.
    I need to pass certain options to GRUB (or Lilo) if I use mkinitcpio? Do you know what options those are.. if indeed I have to. Otherwise, I was thinking of using my own initramfs anyway, just for awareness' sake. I'll do some manual reading and internet searches about the mkinitcpio method.
    Sorry if I missed something and asked a question already answered above..

  • New Owner - T410S

    Just ordered a T410S - i5-560M, Nvdia Optimus, 2 GB and 128 SSD. Finally had to upgrade my 17" Mac Powerbook and haven't use a PC before. Any advice for a newbie - clean install? battery drain? etc. Expected arrival date 4/11/11. Thanks!

    Hi and welcome to the forum!
    Burning a set of recovery discs should be first on your list:- http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-74040
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • AES-NI disabled on Yoga 15 with an i7 5500U

    It seems the device does not support the AES-NI instructions, even though Intel states the CPU should - http://ark.intel.com/products/85214/Intel-Core-i7-5500U-Processor-4M-Cache-up-to-3_00-GHz?q=Intel%20Core%20i7-5500U I've used HWiNFO to confirm AES-NI is indeed disabled. I am using BIOS 1.16, which is the latest.Would we get an update that enables AES-NI? It is extremely useful if you do full disk encryption!Machine model is 20DQ.

    Anyone from Lenovo to say anything? According to some articles this is done intentionally. At least write why you've hindered a CPU that costs a huge amount of money.

  • Optical drive, camera and bluetooth problems with Acer Aspire 7520

    Hello everyone
    First, my DVD drive just stopped working, it's not being recognized by Arch it seems. This has happened before a few times, but it suddenly started to work. I can open the tray manually, and when I insert a DVD, you can see the led blinking and drive does start to spin, but thats all. I've tried removing and reloading cdrom module with no success. Also, there was a /dev/sr0 before, now it's gone.
    Here is the output from dmesg:
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.34-ARCH (tobias@T-POWA-LX) (gcc version 4.5.0 20100610 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010
    Command line: root=/dev/disk/by-uuid/bc6d313b-0d53-423c-a845-a35031b4ffdb ro vga=773
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
    BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 0000000077f50000 (usable)
    BIOS-e820: 0000000077f50000 - 0000000077f65000 (ACPI data)
    BIOS-e820: 0000000077f65000 - 0000000077f66000 (ACPI NVS)
    BIOS-e820: 0000000077f66000 - 0000000080000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    NX (Execute Disable) protection: active
    DMI present.
    e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    No AGP bridge found
    last_pfn = 0x77f50 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-D3FFF write-protect
    D4000-E3FFF uncachable
    E4000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 0000000000 mask FF80000000 write-back
    1 disabled
    2 disabled
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009e000 (usable)
    modified: 000000000009e000 - 00000000000a0000 (reserved)
    modified: 00000000000d2000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 0000000077f50000 (usable)
    modified: 0000000077f50000 - 0000000077f65000 (ACPI data)
    modified: 0000000077f65000 - 0000000077f66000 (ACPI NVS)
    modified: 0000000077f66000 - 0000000080000000 (reserved)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000fff80000 - 0000000100000000 (reserved)
    initial memory mapped : 0 - 20000000
    found SMP MP-table at [ffff8800000f7c90] f7c90
    init_memory_mapping: 0000000000000000-0000000077f50000
    0000000000 - 0077e00000 page 2M
    0077e00000 - 0077f50000 page 4k
    kernel direct mapping tables up to 77f50000 @ 16000-1a000
    RAMDISK: 37e5f000 - 37ff0000
    ACPI: RSDP 00000000000f7ca0 00024 (v02 ACRSYS)
    ACPI: XSDT 0000000077f5e339 0005C (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000)
    ACPI: SLIC 0000000077f64ace 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000)
    ACPI: FACP 0000000077f64c44 000F4 (v03 NVIDIA MCP67-M 06040000 PTL_ 000F4240)
    ACPI: DSDT 0000000077f5e395 066C5 (v01 NVIDIA MCP67 06040000 MSFT 03000000)
    ACPI: FACS 0000000077f65fc0 00040
    ACPI: SSDT 0000000077f64d38 001C4 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
    ACPI: MCFG 0000000077f64efc 0003C (v01 Nvidia NVDAACPI 06040000 NVDA 00000000)
    ACPI: HPET 0000000077f64f38 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
    ACPI: APIC 0000000077f64f70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    ACPI: BOOT 0000000077f64fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    ACPI: Local APIC address 0xfee00000
    [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal empty
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009e
    0: 0x00000100 -> 0x00077f50
    On node 0 totalpages: 491230
    DMA zone: 56 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3926 pages, LIFO batch:0
    DMA32 zone: 6662 pages used for memmap
    DMA32 zone: 480586 pages, LIFO batch:31
    Detected use of extended apic ids on hypertransport bus
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x10de8201 base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    early_res array is doubled to 64 at [18100 - 188ff]
    PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
    Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88232 r8192 d22360 u1048576
    pcpu-alloc: s88232 r8192 d22360 u1048576 alloc=1*2097152
    pcpu-alloc: [0] 0 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 484512
    Kernel command line: root=/dev/disk/by-uuid/bc6d313b-0d53-423c-a845-a35031b4ffdb ro vga=773
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Checking aperture...
    No AGP bridge found
    Node 0: aperture @ 9960000000 size 32 MB
    Aperture beyond 4GB. Ignoring.
    Subtract (49 early reservations)
    #1 [0001000000 - 00016e1178] TEXT DATA BSS
    #2 [0037e5f000 - 0037ff0000] RAMDISK
    #3 [00016e2000 - 00016e20ed] BRK
    #4 [00000f7ca0 - 0000100000] BIOS reserved
    #5 [00000f7c90 - 00000f7ca0] MP-table mpf
    #6 [000009e000 - 000009e471] BIOS reserved
    #7 [000009e5c5 - 00000f7c90] BIOS reserved
    #8 [000009e471 - 000009e5c5] MP-table mpc
    #9 [0000010000 - 0000012000] TRAMPOLINE
    #10 [0000012000 - 0000016000] ACPI WAKEUP
    #11 [0000016000 - 0000018000] PGTABLE
    #12 [00016e2100 - 00016e3100] BOOTMEM
    #13 [0000018000 - 00000180f0] BOOTMEM
    #14 [0001ee4000 - 0001ee5000] BOOTMEM
    #15 [0001ee5000 - 0001ee6000] BOOTMEM
    #16 [0002000000 - 0003c00000] MEMMAP 0
    #17 [00016e3100 - 00016fb100] BOOTMEM
    #18 [00016fb100 - 0001713100] BOOTMEM
    #19 [0001714000 - 0001715000] BOOTMEM
    #20 [00016e1180 - 00016e11c1] BOOTMEM
    #21 [00016e1200 - 00016e1243] BOOTMEM
    #22 [00016e1280 - 00016e1520] BOOTMEM
    #23 [00016e1540 - 00016e15a8] BOOTMEM
    #24 [00016e15c0 - 00016e1628] BOOTMEM
    #25 [00016e1640 - 00016e16a8] BOOTMEM
    #26 [00016e16c0 - 00016e1728] BOOTMEM
    #27 [00016e1740 - 00016e17a8] BOOTMEM
    #28 [00016e17c0 - 00016e1828] BOOTMEM
    #29 [00016e1840 - 00016e18a8] BOOTMEM
    #30 [00016e18c0 - 00016e1928] BOOTMEM
    #31 [00016e1940 - 00016e19a8] BOOTMEM
    #32 [00016e19c0 - 00016e1a28] BOOTMEM
    #33 [00016e1a40 - 00016e1aa8] BOOTMEM
    #34 [00016e1ac0 - 00016e1ae0] BOOTMEM
    #35 [00016e1b00 - 00016e1b47] BOOTMEM
    #36 [00016e1b80 - 00016e1bc7] BOOTMEM
    #37 [0001800000 - 000181d000] BOOTMEM
    #38 [0001900000 - 000191d000] BOOTMEM
    #39 [00016e1c00 - 00016e1c08] BOOTMEM
    #40 [00016e1c40 - 00016e1c48] BOOTMEM
    #41 [00016e1c80 - 00016e1c88] BOOTMEM
    #42 [00016e1cc0 - 00016e1cd0] BOOTMEM
    #43 [00016e1d00 - 00016e1e40] BOOTMEM
    #44 [00016e1e40 - 00016e1ea0] BOOTMEM
    #45 [00016e1ec0 - 00016e1f20] BOOTMEM
    #46 [0001715000 - 000171d000] BOOTMEM
    #47 [000191d000 - 0001b1d000] BOOTMEM
    #48 [0001b1d000 - 0001c1d000] BOOTMEM
    Memory: 1924012k/1965376k available (3484k kernel code, 456k absent, 40908k reserved, 1796k data, 480k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Hierarchical RCU implementation.
    NR_IRQS:768
    Extended CMOS year: 2000
    spurious 8259A interrupt: IRQ7.
    Console: colour dummy device 80x25
    console [tty0] enabled
    allocated 19660800 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 1800.462 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3602.96 BogoMIPS (lpj=6001540)
    Security Framework initialized
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    tseg: 0077f80000
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 5 MCE banks
    using C1E aware idle routine
    Performance Events: AMD PMU driver.
    ... version: 0
    ... bit width: 48
    ... generic registers: 4
    ... value mask: 0000ffffffffffff
    ... max period: 00007fffffffffff
    ... fixed-purpose events: 0
    ... event mask: 000000000000000f
    ACPI: Core revision 20100121
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 stepping 01
    System has AMD C1E enabled
    Switch to broadcast mode on CPU0
    Booting Node 0, Processors #1 Ok.
    Switch to broadcast mode on CPU1
    Brought up 2 CPUs
    Total of 2 processors activated (7204.45 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    node 0 link 0: io port [1000, fffff]
    TOM: 0000000080000000 aka 2048M
    node 0 link 0: mmio [a0000, bffff]
    node 0 link 0: mmio [80000000, dfffffff]
    node 0 link 0: mmio [e0000000, efffffff]
    node 0 link 0: mmio [f0000000, fe0bffff]
    bus: [00, ff] on node 0 link 0
    bus: 00 index 0 [io 0x0000-0xffff]
    bus: 00 index 1 [mem 0x000a0000-0x000bffff]
    bus: 00 index 2 [mem 0x80000000-0xfcffffffff]
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
    pci 0000:00:01.0: reg 10: [io 0x1d00-0x1dff]
    pci 0000:00:01.1: reg 10: [io 0x3080-0x30bf]
    pci 0000:00:01.1: reg 20: [io 0x3040-0x307f]
    pci 0000:00:01.1: reg 24: [io 0x3000-0x303f]
    pci 0000:00:01.1: PME# supported from D3hot D3cold
    pci 0000:00:01.1: PME# disabled
    pci 0000:00:01.3: reg 10: [mem 0xf2400000-0xf247ffff]
    pci 0000:00:02.0: reg 10: [mem 0xf2686000-0xf2686fff]
    pci 0000:00:02.0: supports D1 D2
    pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.0: PME# disabled
    pci 0000:00:02.1: reg 10: [mem 0xf2689000-0xf26890ff]
    pci 0000:00:02.1: supports D1 D2
    pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.1: PME# disabled
    pci 0000:00:04.0: reg 10: [mem 0xf2687000-0xf2687fff]
    pci 0000:00:04.0: supports D1 D2
    pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.0: PME# disabled
    pci 0000:00:04.1: reg 10: [mem 0xf2689400-0xf26894ff]
    pci 0000:00:04.1: supports D1 D2
    pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.1: PME# disabled
    pci 0000:00:07.0: reg 10: [mem 0xf2680000-0xf2683fff]
    pci 0000:00:07.0: PME# supported from D3hot D3cold
    pci 0000:00:07.0: PME# disabled
    pci 0000:00:09.0: reg 10: [io 0x30f0-0x30f7]
    pci 0000:00:09.0: reg 14: [io 0x30e4-0x30e7]
    pci 0000:00:09.0: reg 18: [io 0x30e8-0x30ef]
    pci 0000:00:09.0: reg 1c: [io 0x30e0-0x30e3]
    pci 0000:00:09.0: reg 20: [io 0x30d0-0x30df]
    pci 0000:00:09.0: reg 24: [mem 0xf2684000-0xf2685fff]
    pci 0000:00:0a.0: reg 10: [mem 0xf2688000-0xf2688fff]
    pci 0000:00:0a.0: reg 14: [io 0x30f8-0x30ff]
    pci 0000:00:0a.0: reg 18: [mem 0xf2689c00-0xf2689cff]
    pci 0000:00:0a.0: reg 1c: [mem 0xf2689800-0xf268980f]
    pci 0000:00:0a.0: supports D1 D2
    pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0a.0: PME# disabled
    pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0c.0: PME# disabled
    pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0d.0: PME# disabled
    pci 0000:00:12.0: reg 10: [mem 0xf1000000-0xf1ffffff]
    pci 0000:00:12.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:00:12.0: reg 1c: [mem 0xf0000000-0xf0ffffff 64bit]
    pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    PCI: peer root bus 00 res updated from pci conf
    pci 0000:01:04.0: proprietary Ricoh MMC controller disabled (via firewire function)
    pci 0000:01:04.0: MMC cards are now supported by standard SDHCI controller
    pci 0000:01:04.0: reg 10: [mem 0xf2300000-0xf23007ff]
    pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
    pci 0000:01:04.0: PME# disabled
    pci 0000:01:04.1: reg 10: [mem 0xf2300800-0xf23008ff]
    pci 0000:01:04.1: supports D1 D2
    pci 0000:01:04.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:04.1: PME# disabled
    pci 0000:01:04.2: reg 10: [mem 0xf2301000-0xf23010ff]
    pci 0000:01:04.2: supports D1 D2
    pci 0000:01:04.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:04.2: PME# disabled
    pci 0000:01:04.3: reg 10: [mem 0xf2301400-0xf23014ff]
    pci 0000:01:04.3: supports D1 D2
    pci 0000:01:04.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:04.3: PME# disabled
    pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive decode)
    pci 0000:00:08.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:08.0: bridge window [mem 0xf2300000-0xf23fffff]
    pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:08.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    pci 0000:00:08.0: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
    pci 0000:00:0c.0: PCI bridge to [bus 03-04]
    pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
    pci 0000:00:0c.0: bridge window [mem 0xf2000000-0xf21fffff]
    pci 0000:00:0c.0: bridge window [mem 0xf2800000-0xf29fffff 64bit pref]
    pci 0000:05:00.0: reg 10: [mem 0xf2200000-0xf220ffff 64bit]
    pci 0000:00:0d.0: PCI bridge to [bus 05-05]
    pci 0000:00:0d.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:0d.0: bridge window [mem 0xf2200000-0xf22fffff]
    pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
    ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 11) *10
    ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *11)
    ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 11) *0, disabled.
    ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
    ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
    ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
    ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10
    ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *7
    ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LGPU] (IRQs 17) *10
    ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSI0] (IRQs 20 21 22 23) *5
    ACPI: PCI Interrupt Link [Z00N] (IRQs 20 21 22 23) *10
    ACPI: PCI Interrupt Link [Z00O] (IRQs 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11
    vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    reserve RAM buffer: 000000000009e000 - 000000000009ffff
    reserve RAM buffer: 0000000077f50000 - 0000000077ffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
    hpet0: 3 comparators, 32-bit 25.000000 MHz counter
    Switching to clocksource hpet
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 13 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: [io 0x0360-0x0361] has been reserved
    system 00:01: [io 0x04d0-0x04d1] has been reserved
    system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
    system 00:0a: [io 0x1000-0x107f] has been reserved
    system 00:0a: [io 0x1080-0x10ff] has been reserved
    system 00:0a: [io 0x1400-0x147f] has been reserved
    system 00:0a: [io 0x1480-0x14ff] has been reserved
    system 00:0a: [io 0x1800-0x187f] has been reserved
    system 00:0a: [io 0x1880-0x18ff] has been reserved
    system 00:0c: [mem 0xffc00000-0xffffffff] could not be reserved
    system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
    system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
    system 00:0c: [mem 0xfed00000-0xfed00fff] has been reserved
    system 00:0c: [mem 0xfef00000-0xfef00fff] has been reserved
    pci 0000:00:12.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
    pci 0000:00:08.0: PCI bridge to [bus 01-01]
    pci 0000:00:08.0: bridge window [io disabled]
    pci 0000:00:08.0: bridge window [mem 0xf2300000-0xf23fffff]
    pci 0000:00:08.0: bridge window [mem pref disabled]
    pci 0000:00:0c.0: PCI bridge to [bus 03-04]
    pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
    pci 0000:00:0c.0: bridge window [mem 0xf2000000-0xf21fffff]
    pci 0000:00:0c.0: bridge window [mem 0xf2800000-0xf29fffff 64bit pref]
    pci 0000:00:0d.0: PCI bridge to [bus 05-05]
    pci 0000:00:0d.0: bridge window [io disabled]
    pci 0000:00:0d.0: bridge window [mem 0xf2200000-0xf22fffff]
    pci 0000:00:0d.0: bridge window [mem pref disabled]
    pci 0000:00:08.0: setting latency timer to 64
    pci 0000:00:0c.0: setting latency timer to 64
    pci 0000:00:0d.0: setting latency timer to 64
    pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffffff]
    pci_bus 0000:01: resource 1 [mem 0xf2300000-0xf23fffff]
    pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
    pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:01: resource 6 [mem 0x80000000-0xfcffffffff]
    pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
    pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf21fffff]
    pci_bus 0000:03: resource 2 [mem 0xf2800000-0xf29fffff 64bit pref]
    pci_bus 0000:05: resource 1 [mem 0xf2200000-0xf22fffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    UDP hash table entries: 1024 (order: 3, 32768 bytes)
    UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    NET: Registered protocol family 1
    pci 0000:00:00.0: Found enabled HT MSI Mapping
    pci 0000:00:00.0: Found enabled HT MSI Mapping
    pci 0000:00:00.0: Found enabled HT MSI Mapping
    pci 0000:00:00.0: Found enabled HT MSI Mapping
    pci 0000:00:00.0: Found enabled HT MSI Mapping
    pci 0000:00:00.0: Found enabled HT MSI Mapping
    pci 0000:00:12.0: Boot video device
    PCI: CLS 64 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1604k freed
    Simple Boot Flag at 0x36 set to 0x1
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1280047128.390:1): initialized
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 3760
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pcieport 0000:00:0c.0: setting latency timer to 64
    pcieport 0000:00:0c.0: irq 24 for MSI/MSI-X
    pcieport 0000:00:0d.0: setting latency timer to 64
    pcieport 0000:00:0d.0: irq 25 for MSI/MSI-X
    pcieport 0000:00:0c.0: Requesting control of PCIe PME from ACPI BIOS
    Firmware did not grant requested _OSC control
    pcieport 0000:00:0c.0: Failed to receive control of PCIe PME service: no _OSC support
    pcie_pme: probe of 0000:00:0c.0:pcie01 failed with error -13
    pcieport 0000:00:0d.0: Requesting control of PCIe PME from ACPI BIOS
    Firmware did not grant requested _OSC control
    pcieport 0000:00:0d.0: Failed to receive control of PCIe PME service: no _OSC support
    pcie_pme: probe of 0000:00:0d.0:pcie01 failed with error -13
    vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010100000, using 1536k, total 131072k
    vesafb: mode is 1024x768x8, linelength=1024, pages=3
    vesafb: scrolling: redraw
    vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    PM: Resume from disk failed.
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 480k freed
    udev: starting version 158
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:09.0: version 3.0
    ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
    ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23
    ahci 0000:00:09.0: irq 26 for MSI/MSI-X
    ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ
    ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
    ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio slum part
    ahci 0000:00:09.0: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m8192@0xf2684000 port 0xf2684100 irq 26
    ata2: SATA max UDMA/133 abar m8192@0xf2684000 port 0xf2684180 irq 26
    ata3: SATA max UDMA/133 abar m8192@0xf2684000 port 0xf2684200 irq 26
    ata4: SATA max UDMA/133 abar m8192@0xf2684000 port 0xf2684280 irq 26
    ata2: SATA link down (SStatus 0 SControl 300)
    ata4: SATA link down (SStatus 0 SControl 300)
    ata3: SATA link down (SStatus 0 SControl 300)
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-7: WDC WD1600BEVS-22RST0, 04.01G04, max UDMA/133
    ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-2 04.0 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3
    sd 0:0:0:0: [sda] Attached SCSI disk
    EXT4-fs (sda1): mounted filesystem with ordered data mode
    rtc_cmos 00:04: RTC can wake from S4
    rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
    udev: starting version 159
    fuse init (API version 7.13)
    forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
    ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
    forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
    forcedeth 0000:00:0a.0: setting latency timer to 64
    ACPI: Invalid active0 threshold
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THRM] (34 C)
    ACPI: WMI: Skipping duplicate GUID 05901221-D566-11D1-B2F0-00A0C9062910
    [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
    input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1
    ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
    ACPI: WMI: Mapper loaded
    input: PC Speaker as /devices/platform/pcspkr/input/input2
    forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:38:4e:9e:40
    forcedeth 0000:00:0a.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
    k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
    vboxdrv: Trying to deactivate the NMI watchdog permanently...
    vboxdrv: Successfully done.
    vboxdrv: Found 2 processor cores.
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    VBoxDrv: dbg - g_abExecMemory=ffffffffa01f2560
    vboxdrv: fAsync=1 offMin=0x4e21e offMax=0x4e21e
    vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
    vboxdrv: Successfully loaded version 3.2.0 (interface 0x00140001).
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    lirc_dev: IR Remote Control driver registered, major 61
    i2c i2c-0: nForce2 SMBus adapter at 0x3040
    i2c i2c-1: nForce2 SMBus adapter at 0x3000
    input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
    ACPI: EC: GPE storm detected, transactions will use polling mode
    EDAC MC: Ver: 2.1.0 Jul 5 2010
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
    ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 21 (level, low) -> IRQ 21
    ehci_hcd 0000:00:02.1: setting latency timer to 64
    ehci_hcd 0000:00:02.1: EHCI Host Controller
    ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:02.1: debug port 1
    ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
    ehci_hcd 0000:00:02.1: irq 21, io mem 0xf2689000
    ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
    ACPI: Lid Switch [LID]
    input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
    ACPI: Sleep Button [SLPB]
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
    ACPI: Power Button [PWRB]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
    ACPI: Power Button [PWRF]
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 5 ports detected
    ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 20
    ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z00O] -> GSI 20 (level, low) -> IRQ 20
    ehci_hcd 0000:00:04.1: setting latency timer to 64
    ehci_hcd 0000:00:04.1: EHCI Host Controller
    ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:04.1: debug port 1
    ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
    ehci_hcd 0000:00:04.1: irq 20, io mem 0xf2689400
    lirc_dev: lirc_register_driver: sample_rate: 0
    enecir: KB3926B detected
    enecir: chip is 0x3909 - 0x24, 0xc0
    enecir: driver has been succesfully loaded
    ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 5 ports detected
    ACPI: AC Adapter [ACAD] (off-line)
    ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
    firewire_ohci 0000:01:04.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
    firewire_ohci: Added fw-ohci device 0000:01:04.0, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x0
    usb 1-3: new high speed USB device using ehci_hcd and address 2
    hub 1-0:1.0: unable to enumerate USB device on port 3
    ACPI: Battery Slot [BAT1] (battery present)
    nvidia: module license 'NVIDIA' taints kernel.
    Disabling lock debugging due to kernel taint
    firewire_core: created device fw0: GUID 00023f78c5006d9b, S400
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
    ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 23 (level, low) -> IRQ 23
    ohci_hcd 0000:00:02.0: setting latency timer to 64
    ohci_hcd 0000:00:02.0: OHCI Host Controller
    ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:02.0: irq 23, io mem 0xf2686000
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 5 ports detected
    ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 22
    ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z00N] -> GSI 22 (level, low) -> IRQ 22
    ohci_hcd 0000:00:04.0: setting latency timer to 64
    ohci_hcd 0000:00:04.0: OHCI Host Controller
    ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
    ohci_hcd 0000:00:04.0: irq 22, io mem 0xf2687000
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 5 ports detected
    EDAC amd64_edac: Ver: 3.3.0 Jul 5 2010
    EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
    EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    (Note that use of the override may cause unknown side effects.)
    amd64_edac: probe of 0000:00:18.2 failed with error -22
    cfg80211: Calling CRDA to update world regulatory domain
    ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 17
    nvidia 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 17 (level, low) -> IRQ 17
    nvidia 0000:00:12.0: setting latency timer to 64
    vgaarb: device changed decodes: PCI:0000:00:12.0,olddecodes=io+mem,decodes=none:owns=io+mem
    NVRM: loading NVIDIA UNIX x86_64 Kernel Module 256.35 Wed Jun 16 18:42:44 PDT 2010
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pci 0000:01:04.1: SDHCI controller found [1180:0822] (rev 22)
    ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
    sdhci-pci 0000:01:04.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
    sdhci-pci 0000:01:04.1: Will use DMA mode even though HW doesn't fully claim to support it.
    Registered led device: mmc0::
    mmc0: SDHCI controller on PCI [0000:01:04.1] using DMA
    usb 3-3: new full speed USB device using ohci_hcd and address 2
    ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
    ath5k 0000:05:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19
    ath5k 0000:05:00.0: setting latency timer to 64
    ath5k 0000:05:00.0: registered as 'phy0'
    usb 3-3: not running at top speed; connect to a high speed hub
    ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
    HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
    hda_intel: Disable MSI for Nvidia chipset
    HDA Intel 0000:00:07.0: setting latency timer to 64
    Linux video capture interface: v2.00
    input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
    uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101)
    input: Acer CrystalEye webcam as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input8
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
    ath: EEPROM regdomain: 0x65
    ath: EEPROM indicates we should expect a direct regpair map
    ath: Country alpha2 being used: 00
    ath: Regpair used: 0x65
    phy0: Selected rate control algorithm 'minstrel'
    Registered led device: ath5k-phy0::rx
    Registered led device: ath5k-phy0::tx
    ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input10
    ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20100121/evregion-474)
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.ECOK] (Node ffff88007781ffc0), AE_TIME
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.ACAD._PSR] (Node ffff8800778259e0), AE_TIME
    ACPI Exception: AE_TIME, Error reading AC Adapter state (20100121/ac-141)
    EXT4-fs (sda2): mounted filesystem with ordered data mode
    Adding 2152704k swap on /dev/sda3. Priority:-1 extents:1 across:2152704k
    forcedeth 0000:00:0a.0: irq 27 for MSI/MSI-X
    eth0: no link during initialization.
    Clocksource tsc unstable (delta = 4398046404009 ns)
    ata1.00: configured for UDMA/133
    ata1: EH complete
    sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    nvclock:2261 freeing invalid memtype f1000000-f1010000
    nvclock:2261 freeing invalid memtype f1010000-f1030000
    wlan0: Trigger new scan to find an IBSS to join
    wlan0: Trigger new scan to find an IBSS to join
    wlan0: Trigger new scan to find an IBSS to join
    wlan0: Creating new IBSS network, BSSID b2:0a:28:21:7c:ac
    ip_tables: (C) 2000-2006 Netfilter Core Team
    nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
    nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
    sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
    wlan0: deauthenticating from 00:1e:e5:45:bf:58 by local choice (reason=3)
    wlan0: authenticate with 00:1e:e5:45:bf:58 (try 1)
    wlan0: authenticated
    wlan0: associate with 00:1e:e5:45:bf:58 (try 1)
    wlan0: RX AssocResp from 00:1e:e5:45:bf:58 (capab=0x411 status=0 aid=1)
    wlan0: associated
    Intel AES-NI instructions are not detected.
    padlock: VIA PadLock not detected.
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    wlan0: no IPv6 routers present
    CE: hpet increased min_delta_ns to 7500 nsec
    ata1.00: configured for UDMA/133
    ata1: EH complete
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Now, the camera issue is a bit different. It worked before with no problems. But now, when I start guvcview, it opens it's main window, and a second window that usually show picture from camera, just appears for a moment and disappears. The led next to my camera turns on, and stays that way. Also, yesterday when I was trying to test the camera, guvcview stuck in a uninteruptible state, so I couldn't kill him in any way. Even after I close guvcview, the camera led is still on, but he is not among active processes. Although in the guvcview output below it says that the device is in use, I don't know how, because I rebooted my laptop and then I tried to run it.
    This is what guvcview outputs in console after I start and then close it:
    guvcview 1.3.0
    video device: /dev/video0
    /dev/video0 - device 1
    Init. Acer CrystalEye webcam (location: usb-0000:00:02.0-3)
    { pixelformat = 'MJPG', description = 'MJPEG' }
    { discrete: width = 640, height = 480 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 352, height = 288 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 320, height = 240 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 176, height = 144 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 160, height = 120 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { pixelformat = 'RGB3', description = 'RGB3' }
    { discrete: width = 640, height = 480 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 352, height = 288 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 320, height = 240 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 176, height = 144 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 160, height = 120 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { pixelformat = 'BGR3', description = 'BGR3' }
    { discrete: width = 640, height = 480 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 352, height = 288 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 320, height = 240 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 176, height = 144 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 160, height = 120 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { pixelformat = 'YU12', description = 'YU12' }
    { discrete: width = 640, height = 480 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 352, height = 288 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 320, height = 240 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 176, height = 144 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 160, height = 120 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { pixelformat = 'YV12', description = 'YV12' }
    { discrete: width = 640, height = 480 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 352, height = 288 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 320, height = 240 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 176, height = 144 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 160, height = 120 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    vid:064e
    pid:a101
    driver:uvcvideo
    checking format: 1196444237
    VIDIOC_G_COMP:: Invalid argument
    compression control not supported
    fps is set to 1/30
    V4L2_CTRL_FLAG_NEXT_CTRL supported
    libv4l2: error turning on stream: Timer expired
    VIDIOC_STREAMON - Unable to start capture: Timer expired
    fps is set to 1/30
    libv4l2: error turning on stream: Device or resource busy
    VIDIOC_STREAMON - Unable to start capture: Device or resource busy
    libv4l2: error turning on stream: Device or resource busy
    VIDIOC_STREAMON - Unable to start capture: Device or resource busy
    write /home/amar/.guvcviewrc OK
    free controls
    cleaned allocations - 100%
    Closing portaudio ...OK
    Closing GTK... OK
    For the bluetooth, I really never managed to get it working. The bluetooth daemons starts with no problems, but hcitool dev shows no devices. I read the wiki, and the only thing I didn't try is the hid2hci tool, I couldn't figure out what to use for devpath argument.
    Thanks.

    for DVD:
    which DE you use ?
    post your
    /etc/fstab

  • Realtek ethernet initialization slow [SOLVED]

    Hello!
    I am having problems with my ethernet controller (Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller) taking 40-60 seconds to get a network connection.
    I am using netcfg 2.6.8-1 and have enabled net-auto-wired in my DAEMONS array:
    DAEMONS=(syslog-ng crond dbus net-auto-wired net-auto-wireless !ntpd cupsd netfs mpd)
    Here is my netcfg profile:
    CONNECTION='ethernet'
    DESCRIPTION='Ethernet connection at home'
    INTERFACE='eth0'
    IP='dhcp'
    ## for DHCPv6
    #IP6='dhcp'
    ## for IPv6 autoconfiguration
    #IP6='stateless
    This is the output from lspci:
    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
    00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
    00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
    00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
    00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
    00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
    00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
    01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8600M GS] (rev a1)
    02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
    08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
    09:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
    09:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
    09:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
    09:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
    This is the output from dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 19 10:27:51 CEST 2011
    [ 0.000000] Command line: root=UUID=1ca8888a-877c-4b74-b3ce-18de2ca02022 ro 5
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
    [ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv9700 Notebook PC /30CB, BIOS F.59 11/25/2008
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-D7FFF write-protect
    [ 0.000000] D8000-DBFFF uncachable
    [ 0.000000] DC000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [ffff8800000f8520] f8520
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfed0000
    [ 0.000000] 0000000000 - 00bfe00000 page 2M
    [ 0.000000] 00bfe00000 - 00bfed0000 page 4k
    [ 0.000000] kernel direct mapping tables up to bfed0000 @ bfecb000-bfed0000
    [ 0.000000] RAMDISK: 37dca000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000f8480 00024 (v02 HP )
    [ 0.000000] ACPI: XSDT 00000000bfed5bdd 0007C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 00000000bfedfc6c 000F4 (v03 HP 30CC 06040000 ALAN 00000001)
    [ 0.000000] ACPI: DSDT 00000000bfed703c 08BBC (v01 HP 30CB 06040000 INTL 20061109)
    [ 0.000000] ACPI: FACS 00000000bfee2fc0 00040
    [ 0.000000] ACPI: HPET 00000000bfedfd60 00038 (v01 HP 30CB 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: MCFG 00000000bfedfd98 0003C (v01 HP 30CB 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: TMOR 00000000bfedfdd4 00026 (v01 HP 30CC 06040000 PTL 00000003)
    [ 0.000000] ACPI: APIC 00000000bfedfdfa 00068 (v01 HP 30CB 06040000 LTP 00000000)
    [ 0.000000] ACPI: BOOT 00000000bfedfe62 00028 (v01 HP 30CB 06040000 LTP 00000001)
    [ 0.000000] ACPI: SLIC 00000000bfedfe8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
    [ 0.000000] ACPI: SSDT 00000000bfed6d5f 002DD (v01 HP 30CB 00001000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000bfed61e5 0025F (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000bfed613f 000A6 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000bfed5c59 004E6 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-00000000bfed0000
    [ 0.000000] Initmem setup node 0 0000000000000000-00000000bfed0000
    [ 0.000000] NODE_DATA [00000000bfec6000 - 00000000bfecafff]
    [ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800bc600000-ffff8800beffffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x000bfed0
    [ 0.000000] On node 0 totalpages: 786015
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3922 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10692 pages used for memmap
    [ 0.000000] DMA32 zone: 771340 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8800bfc00000 s78464 r8192 d23936 u1048576
    [ 0.000000] pcpu-alloc: s78464 r8192 d23936 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 775262
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: root=UUID=1ca8888a-877c-4b74-b3ce-18de2ca02022 ro 5
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3088932k/3144512k available (4066k kernel code, 452k absent, 55128k reserved, 3302k data, 712k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 25165824 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1828.793 MHz processor.
    [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3659.98 BogoMIPS (lpj=6095976)
    [ 0.003344] pid_max: default: 32768 minimum: 301
    [ 0.003483] Security Framework initialized
    [ 0.003491] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006723] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.009911] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.011485] Mount-cache hash table entries: 256
    [ 0.012020] Initializing cgroup subsys cpuacct
    [ 0.012063] Initializing cgroup subsys memory
    [ 0.012087] Initializing cgroup subsys devices
    [ 0.012090] Initializing cgroup subsys freezer
    [ 0.012092] Initializing cgroup subsys net_cls
    [ 0.012095] Initializing cgroup subsys blkio
    [ 0.012163] CPU: Physical Processor ID: 0
    [ 0.012165] CPU: Processor Core ID: 0
    [ 0.012168] mce: CPU supports 6 MCE banks
    [ 0.012178] CPU0: Thermal monitoring enabled (TM2)
    [ 0.012185] using mwait in idle threads.
    [ 0.013589] ACPI: Core revision 20110413
    [ 0.020015] ftrace: allocating 16144 entries in 64 pages
    [ 0.023754] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.059353] CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d
    [ 0.059996] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.059996] PEBS disabled due to CPU errata.
    [ 0.059996] ... version: 2
    [ 0.059996] ... bit width: 40
    [ 0.059996] ... generic registers: 2
    [ 0.059996] ... value mask: 000000ffffffffff
    [ 0.059996] ... max period: 000000007fffffff
    [ 0.059996] ... fixed-purpose events: 3
    [ 0.059996] ... event mask: 0000000700000003
    [ 0.076788] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.103342] Booting Node 0, Processors #1 Ok.
    [ 0.103346] smpboot cpu 1: start_ip = 9a000
    [ 0.200020] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.206659] Brought up 2 CPUs
    [ 0.206662] Total of 2 processors activated (7318.31 BogoMIPS).
    [ 0.207867] devtmpfs: initialized
    [ 0.208097] PM: Registering ACPI NVS region at bfed0000 (77824 bytes)
    [ 0.210342] print_constraints: dummy:
    [ 0.210439] NET: Registered protocol family 16
    [ 0.210574] ACPI: bus type pci registered
    [ 0.210759] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.210763] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.251674] PCI: Using configuration type 1 for base access
    [ 0.252194] bio: create slab <bio-0> at 0
    [ 0.254077] ACPI: EC: Look up EC in DSDT
    [ 0.254256] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20110413/psargs-359)
    [ 0.254264] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff8800bae32a78), AE_NOT_FOUND (20110413/psparse-536)
    [ 0.256623] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.257710] ACPI: SSDT 00000000bfed6aa1 001F6 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.258077] ACPI: Dynamic OEM Table Load:
    [ 0.258081] ACPI: SSDT (null) 001F6 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.258208] ACPI: SSDT 00000000bfed6444 005D8 (v01 HP 30CB 00003001 INTL 20061109)
    [ 0.258557] ACPI: Dynamic OEM Table Load:
    [ 0.258561] ACPI: SSDT (null) 005D8 (v01 HP 30CB 00003001 INTL 20061109)
    [ 0.258784] ACPI: SSDT 00000000bfed6c97 000C8 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.259142] ACPI: Dynamic OEM Table Load:
    [ 0.259146] ACPI: SSDT (null) 000C8 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.259233] ACPI: SSDT 00000000bfed6a1c 00085 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.259584] ACPI: Dynamic OEM Table Load:
    [ 0.259587] ACPI: SSDT (null) 00085 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.259886] ACPI: Interpreter enabled
    [ 0.259890] ACPI: (supports S0 S3 S4 S5)
    [ 0.259911] ACPI: Using IOAPIC for interrupt routing
    [ 0.267408] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.267597] ACPI: No dock devices found.
    [ 0.267599] HEST: Table not found.
    [ 0.267603] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.267938] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.268586] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.268590] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.268593] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.268597] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 0.268600] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.268603] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.268606] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
    [ 0.268609] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
    [ 0.268629] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
    [ 0.268683] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
    [ 0.268726] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.268730] pci 0000:00:01.0: PME# disabled
    [ 0.268789] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
    [ 0.268853] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
    [ 0.268899] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
    [ 0.268964] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
    [ 0.269028] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
    [ 0.269055] pci 0000:00:1a.7: reg 10: [mem 0xf8404800-0xf8404bff]
    [ 0.269154] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.269161] pci 0000:00:1a.7: PME# disabled
    [ 0.269192] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
    [ 0.269218] pci 0000:00:1b.0: reg 10: [mem 0xf8400000-0xf8403fff 64bit]
    [ 0.269311] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.269317] pci 0000:00:1b.0: PME# disabled
    [ 0.269348] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
    [ 0.269445] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.269450] pci 0000:00:1c.0: PME# disabled
    [ 0.269484] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
    [ 0.269580] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.269585] pci 0000:00:1c.1: PME# disabled
    [ 0.269624] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
    [ 0.269720] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.269726] pci 0000:00:1c.5: PME# disabled
    [ 0.269759] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
    [ 0.269822] pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
    [ 0.269867] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
    [ 0.269931] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
    [ 0.270004] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
    [ 0.270068] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
    [ 0.270130] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
    [ 0.270157] pci 0000:00:1d.7: reg 10: [mem 0xf8404c00-0xf8404fff]
    [ 0.270257] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.270263] pci 0000:00:1d.7: PME# disabled
    [ 0.270290] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 0.270386] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
    [ 0.270498] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    [ 0.270505] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
    [ 0.270514] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007)
    [ 0.270559] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
    [ 0.270578] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
    [ 0.270591] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
    [ 0.270605] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
    [ 0.270618] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
    [ 0.270632] pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af]
    [ 0.270689] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
    [ 0.270719] pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df]
    [ 0.270732] pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf]
    [ 0.270746] pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7]
    [ 0.270760] pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb]
    [ 0.270773] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
    [ 0.270787] pci 0000:00:1f.2: reg 24: [mem 0xf8404000-0xf84047ff]
    [ 0.270841] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.270847] pci 0000:00:1f.2: PME# disabled
    [ 0.270870] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
    [ 0.270889] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
    [ 0.270936] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
    [ 0.271034] pci 0000:01:00.0: [10de:0425] type 0 class 0x000300
    [ 0.271055] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff]
    [ 0.271078] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.271102] pci 0000:01:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit]
    [ 0.271118] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
    [ 0.271134] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.271221] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.271225] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.271229] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
    [ 0.271234] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.271401] pci 0000:02:00.0: [8086:4222] type 0 class 0x000280
    [ 0.271458] pci 0000:02:00.0: reg 10: [mem 0xf4000000-0xf4000fff]
    [ 0.271795] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.271808] pci 0000:02:00.0: PME# disabled
    [ 0.271878] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.271917] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
    [ 0.271922] pci 0000:00:1c.0: bridge window [io 0x4000-0x7fff]
    [ 0.271928] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
    [ 0.271938] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.272006] pci 0000:00:1c.1: PCI bridge to [bus 04-07]
    [ 0.272012] pci 0000:00:1c.1: bridge window [io 0x8000-0xbfff]
    [ 0.272018] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff]
    [ 0.272027] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
    [ 0.272128] pci 0000:08:00.0: [10ec:8168] type 0 class 0x000200
    [ 0.272154] pci 0000:08:00.0: reg 10: [io 0xc000-0xc0ff]
    [ 0.272198] pci 0000:08:00.0: reg 18: [mem 0xf8000000-0xf8000fff 64bit]
    [ 0.272250] pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.272315] pci 0000:08:00.0: supports D1 D2
    [ 0.272318] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 0.272325] pci 0000:08:00.0: PME# disabled
    [ 0.272354] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.272367] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
    [ 0.272373] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.272379] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
    [ 0.272388] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.272454] pci 0000:09:09.0: [1180:0832] type 0 class 0x000c00
    [ 0.272472] pci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
    [ 0.272474] pci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
    [ 0.272492] pci 0000:09:09.0: reg 10: [mem 0xf8100000-0xf81007ff]
    [ 0.272587] pci 0000:09:09.0: supports D1 D2
    [ 0.272589] pci 0000:09:09.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.272595] pci 0000:09:09.0: PME# disabled
    [ 0.272619] pci 0000:09:09.1: [1180:0822] type 0 class 0x000805
    [ 0.272642] pci 0000:09:09.1: reg 10: [mem 0xf8100800-0xf81008ff]
    [ 0.272735] pci 0000:09:09.1: supports D1 D2
    [ 0.272737] pci 0000:09:09.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.272744] pci 0000:09:09.1: PME# disabled
    [ 0.272767] pci 0000:09:09.2: [1180:0592] type 0 class 0x000880
    [ 0.272791] pci 0000:09:09.2: reg 10: [mem 0xf8101000-0xf81010ff]
    [ 0.272884] pci 0000:09:09.2: supports D1 D2
    [ 0.272886] pci 0000:09:09.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.272892] pci 0000:09:09.2: PME# disabled
    [ 0.272915] pci 0000:09:09.3: [1180:0852] type 0 class 0x000880
    [ 0.272938] pci 0000:09:09.3: reg 10: [mem 0xf8101400-0xf81014ff]
    [ 0.273031] pci 0000:09:09.3: supports D1 D2
    [ 0.273033] pci 0000:09:09.3: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.273039] pci 0000:09:09.3: PME# disabled
    [ 0.273095] pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
    [ 0.273101] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.273107] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
    [ 0.273116] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.273120] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.273123] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.273126] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.273129] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    [ 0.273132] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.273135] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.273139] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    [ 0.273142] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
    [ 0.273177] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.273305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    [ 0.273370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.273416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.273457] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 0.273521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    [ 0.273569] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.273573] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.273575] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.278401] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    [ 0.278457] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.278510] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    [ 0.278561] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.278613] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.278665] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 0.278715] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.278767] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.278887] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.278894] vgaarb: loaded
    [ 0.278896] vgaarb: bridge control possible 0000:01:00.0
    [ 0.279005] PCI: Using ACPI for IRQ routing
    [ 0.291398] PCI: pci_cache_line_size set to 64 bytes
    [ 0.291537] reserve RAM buffer: 000000000009f800 - 000000000009ffff
    [ 0.291540] reserve RAM buffer: 00000000bfed0000 - 00000000bfffffff
    [ 0.291700] NetLabel: Initializing
    [ 0.291703] NetLabel: domain hash size = 128
    [ 0.291705] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.291722] NetLabel: unlabeled traffic allowed by default
    [ 0.291738] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.291744] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.291750] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.303337] Switching to clocksource hpet
    [ 0.306534] Switched to NOHz mode on CPU #0
    [ 0.306616] Switched to NOHz mode on CPU #1
    [ 0.311449] pnp: PnP ACPI init
    [ 0.311470] ACPI: bus type pnp registered
    [ 0.312253] pnp 00:00: [bus 00-ff]
    [ 0.312257] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.312259] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.312262] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.312265] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.312267] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.312270] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.312272] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.312275] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.312277] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.312280] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.312282] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.312285] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.312287] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.312290] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.312292] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.312295] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.312298] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.312300] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
    [ 0.312303] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
    [ 0.312306] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.312393] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.312475] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 0.312478] pnp 00:01: [mem 0xfed14000-0xfed17fff]
    [ 0.312481] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [ 0.312483] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 0.312485] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 0.312492] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
    [ 0.312494] pnp 00:01: [mem 0xfed40000-0xfed44fff]
    [ 0.312497] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
    [ 0.312583] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.312587] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.312590] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.312594] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.312597] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.312600] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.312603] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.312607] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.312611] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.312836] pnp 00:02: [io 0x0000-0x001f]
    [ 0.312838] pnp 00:02: [io 0x0081-0x0091]
    [ 0.312841] pnp 00:02: [io 0x0093-0x009f]
    [ 0.312843] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.312845] pnp 00:02: [dma 4]
    [ 0.312895] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.312909] pnp 00:03: [mem 0xff000000-0xffffffff]
    [ 0.312961] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.313035] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 0.313108] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
    [ 0.313112] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [ 0.313126] pnp 00:05: [io 0x00f0]
    [ 0.313138] pnp 00:05: [irq 13]
    [ 0.313188] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.313201] pnp 00:06: [io 0x002e-0x002f]
    [ 0.313203] pnp 00:06: [io 0x004e-0x004f]
    [ 0.313205] pnp 00:06: [io 0x0061]
    [ 0.313208] pnp 00:06: [io 0x0063]
    [ 0.313210] pnp 00:06: [io 0x0065]
    [ 0.313212] pnp 00:06: [io 0x0067]
    [ 0.313214] pnp 00:06: [io 0x0080]
    [ 0.313216] pnp 00:06: [io 0x0092]
    [ 0.313218] pnp 00:06: [io 0x00b2-0x00b3]
    [ 0.313220] pnp 00:06: [io 0x0380-0x0383]
    [ 0.313222] pnp 00:06: [io 0x0680-0x069f]
    [ 0.313224] pnp 00:06: [io 0x0800-0x080f]
    [ 0.313226] pnp 00:06: [io 0x1000-0x107f]
    [ 0.313229] pnp 00:06: [io 0x1180-0x11bf]
    [ 0.313231] pnp 00:06: [io 0x1640-0x164f]
    [ 0.313233] pnp 00:06: [io 0xfe00]
    [ 0.313323] system 00:06: [io 0x0380-0x0383] has been reserved
    [ 0.313327] system 00:06: [io 0x0680-0x069f] has been reserved
    [ 0.313330] system 00:06: [io 0x0800-0x080f] has been reserved
    [ 0.313348] system 00:06: [io 0x1000-0x107f] has been reserved
    [ 0.313351] system 00:06: [io 0x1180-0x11bf] has been reserved
    [ 0.313354] system 00:06: [io 0x1640-0x164f] has been reserved
    [ 0.313357] system 00:06: [io 0xfe00] has been reserved
    [ 0.313361] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.313386] pnp 00:07: [io 0x06a0-0x06af]
    [ 0.313389] pnp 00:07: [io 0x06b0-0x06ff]
    [ 0.313460] system 00:07: [io 0x06a0-0x06af] has been reserved
    [ 0.313464] system 00:07: [io 0x06b0-0x06ff] has been reserved
    [ 0.313467] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.313478] pnp 00:08: [io 0x0070-0x0077]
    [ 0.313485] pnp 00:08: [irq 8]
    [ 0.313539] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.313607] pnp 00:09: [io 0x0060]
    [ 0.313609] pnp 00:09: [io 0x0064]
    [ 0.313615] pnp 00:09: [irq 1]
    [ 0.313673] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.313688] pnp 00:0a: [irq 12]
    [ 0.313750] pnp 00:0a: Plug and Play ACPI device, IDs SYN0138 SYN0100 SYN0002 PNP0f13 (active)
    [ 0.313774] pnp: PnP ACPI: found 11 devices
    [ 0.313776] ACPI: ACPI bus type pnp unregistered
    [ 0.320373] PCI: max bus depth: 1 pci_try_num: 2
    [ 0.320432] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc00fffff pref]
    [ 0.320436] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0100000-0xc01000ff]
    [ 0.320444] pci 0000:00:1f.3: BAR 0: set to [mem 0xc0100000-0xc01000ff] (PCI address [0xc0100000-0xc01000ff])
    [ 0.320450] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
    [ 0.320453] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.320456] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.320461] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
    [ 0.320466] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.320472] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
    [ 0.320476] pci 0000:00:1c.0: bridge window [io 0x4000-0x7fff]
    [ 0.320483] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
    [ 0.320489] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.320498] pci 0000:00:1c.1: PCI bridge to [bus 04-07]
    [ 0.320502] pci 0000:00:1c.1: bridge window [io 0x8000-0xbfff]
    [ 0.320510] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff]
    [ 0.320516] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
    [ 0.320526] pci 0000:08:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
    [ 0.320529] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
    [ 0.320533] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.320540] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
    [ 0.320546] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc00fffff pref]
    [ 0.320556] pci 0000:00:1e.0: PCI bridge to [bus 09-09]
    [ 0.320558] pci 0000:00:1e.0: bridge window [io disabled]
    [ 0.320565] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
    [ 0.320571] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 0.320591] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.320596] pci 0000:00:01.0: setting latency timer to 64
    [ 0.320607] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 0.320613] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.320621] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [ 0.320627] pci 0000:00:1c.1: setting latency timer to 64
    [ 0.320635] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [ 0.320641] pci 0000:00:1c.5: setting latency timer to 64
    [ 0.320650] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.320655] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.320658] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.320660] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.320663] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.320666] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.320669] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.320672] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff]
    [ 0.320674] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
    [ 0.320677] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    [ 0.320680] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
    [ 0.320683] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.320686] pci_bus 0000:02: resource 0 [io 0x4000-0x7fff]
    [ 0.320689] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
    [ 0.320692] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.320695] pci_bus 0000:04: resource 0 [io 0x8000-0xbfff]
    [ 0.320697] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf7ffffff]
    [ 0.320700] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
    [ 0.320704] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
    [ 0.320706] pci_bus 0000:08: resource 1 [mem 0xf8000000-0xf80fffff]
    [ 0.320709] pci_bus 0000:08: resource 2 [mem 0xc0000000-0xc00fffff pref]
    [ 0.320712] pci_bus 0000:09: resource 1 [mem 0xf8100000-0xf81fffff]
    [ 0.320715] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
    [ 0.320718] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
    [ 0.320720] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.320723] pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.320726] pci_bus 0000:09: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.320728] pci_bus 0000:09: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.320731] pci_bus 0000:09: resource 10 [mem 0xc0000000-0xdfffffff]
    [ 0.320734] pci_bus 0000:09: resource 11 [mem 0xf0000000-0xfebfffff]
    [ 0.320830] NET: Registered protocol family 2
    [ 0.321074] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.322679] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.328896] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.329687] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.329690] TCP reno registered
    [ 0.329704] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.329768] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.330176] NET: Registered protocol family 1
    [ 0.330392] pci 0000:01:00.0: Boot video device
    [ 0.330419] PCI: CLS 64 bytes, default 64
    [ 0.330488] Unpacking initramfs...
    [ 0.369353] Freeing initrd memory: 2200k freed
    [ 0.370476] Simple Boot Flag at 0x35 set to 0x1
    [ 0.370972] audit: initializing netlink socket (disabled)
    [ 0.370988] type=2000 audit(1320586961.369:1): initialized
    [ 0.380802] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.401147] VFS: Disk quotas dquot_6.5.2
    [ 0.401325] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.401521] msgmni has been set to 6037
    [ 0.401788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.401833] io scheduler noop registered
    [ 0.401836] io scheduler deadline registered
    [ 0.401898] io scheduler cfq registered (default)
    [ 0.402034] pcieport 0000:00:01.0: setting latency timer to 64
    [ 0.402072] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.402134] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.402193] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.402283] pcieport 0000:00:1c.1: setting latency timer to 64
    [ 0.402342] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    [ 0.402432] pcieport 0000:00:1c.5: setting latency timer to 64
    [ 0.402491] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
    [ 0.402686] intel_idle: MWAIT substates: 0x22220
    [ 0.402689] intel_idle: does not run on family 6 model 15
    [ 0.402694] ERST: Table is not found!
    [ 0.402765] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.603627] Linux agpgart interface v0.103
    [ 0.603727] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.625005] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.625045] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.625141] mousedev: PS/2 mouse device common for all mice
    [ 0.627290] rtc_cmos 00:08: RTC can wake from S4
    [ 0.627416] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    [ 0.627450] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.627461] cpuidle: using governor ladder
    [ 0.627463] cpuidle: using governor menu
    [ 0.627728] TCP cubic registered
    [ 0.627731] NET: Registered protocol family 17
    [ 0.627740] Registering the dns_resolver key type
    [ 0.627861] PM: Hibernation image not present or could not be loaded.
    [ 0.627867] registered taskstats version 1
    [ 0.637491] rtc_cmos 00:08: setting system clock to 2011-11-06 13:42:42 UTC (1320586962)
    [ 0.637554] Initializing network drop monitor service
    [ 0.639163] Freeing unused kernel memory: 712k freed
    [ 0.639370] Write protecting the kernel read-only data: 6144k
    [ 0.639542] Freeing unused kernel memory: 12k freed
    [ 0.642762] Freeing unused kernel memory: 776k freed
    [ 0.652005] udevd[37]: starting version 174
    [ 0.661005] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.712421] usbcore: registered new interface driver usbfs
    [ 0.712452] usbcore: registered new interface driver hub
    [ 0.712861] usbcore: registered new device driver usb
    [ 0.714129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.714176] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.714199] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 0.714204] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 0.714256] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 0.714293] ehci_hcd 0000:00:1a.7: debug port 1
    [ 0.721629] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [ 0.721658] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
    [ 0.733414] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 0.733616] hub 1-0:1.0: USB hub found
    [ 0.733621] hub 1-0:1.0: 4 ports detected
    [ 0.733740] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 0.733767] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 0.733772] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 0.733928] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 0.733968] ehci_hcd 0000:00:1d.7: debug port 1
    [ 0.740812] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 0.740839] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
    [ 0.756276] SCSI subsystem initialized
    [ 0.763405] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.763606] hub 2-0:1.0: USB hub found
    [ 0.763612] hub 2-0:1.0: 6 ports detected
    [ 0.766819] libata version 3.00 loaded.
    [ 0.768867] ahci 0000:00:1f.2: version 3.0
    [ 0.768891] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.768950] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 0.769022] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
    [ 0.769027] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
    [ 0.769033] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.769769] scsi0 : ahci
    [ 0.770124] scsi1 : ahci
    [ 0.770204] scsi2 : ahci
    [ 0.770347] ata1: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 44
    [ 0.770352] ata2: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 44
    [ 0.770355] ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 44
    [ 0.780764] ata_piix 0000:00:1f.1: version 2.13
    [ 0.780782] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 0.780828] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 0.781218] scsi3 : ata_piix
    [ 0.781306] scsi4 : ata_piix
    [ 0.781726] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
    [ 0.781729] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
    [ 0.857333] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.857390] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.857402] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 0.857407] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 0.857423] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 0.857475] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
    [ 0.857662] hub 3-0:1.0: USB hub found
    [ 0.857667] hub 3-0:1.0: 2 ports detected
    [ 0.857769] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 0.857777] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 0.857781] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 0.857790] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 0.857833] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
    [ 0.857993] hub 4-0:1.0: USB hub found
    [ 0.857998] hub 4-0:1.0: 2 ports detected
    [ 0.858094] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 0.858102] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.858106] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.858116] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    [ 0.858154] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
    [ 0.858306] hub 5-0:1.0: USB hub found
    [ 0.858311] hub 5-0:1.0: 2 ports detected
    [ 0.858396] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.858406] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 0.858411] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.858429] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    [ 0.858475] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
    [ 0.858621] hub 6-0:1.0: USB hub found
    [ 0.858625] hub 6-0:1.0: 2 ports detected
    [ 0.858708] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.858715] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 0.858720] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.858728] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    [ 0.858762] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
    [ 0.858914] hub 7-0:1.0: USB hub found
    [ 0.858919] hub 7-0:1.0: 2 ports detected
    [ 0.950398] ata4.00: ATAPI: Optiarc BD ROM BC-5500A, 1.86, max MWDMA2
    [ 0.963614] ata4.00: configured for MWDMA2
    [ 1.090033] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.090057] ata2: SATA link down (SStatus 0 SControl 300)
    [ 1.090090] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.090919] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.090924] ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100
    [ 1.090928] ata1.00: 488397168 sectors, multi 16: LBA48
    [ 1.091030] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.091035] ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100
    [ 1.091038] ata3.00: 488397168 sectors, multi 16: LBA48
    [ 1.091928] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.091933] ata1.00: configured for UDMA/100
    [ 1.092038] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.092044] ata3.00: configured for UDMA/100
    [ 1.092136] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
    [ 1.092469] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
    [ 1.093620] scsi 3:0:0:0: CD-ROM Optiarc BD ROM BC-5500A 1.86 PQ: 0 ANSI: 5
    [ 1.102218] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 1.102259] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 1.102284] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.102288] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.102315] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.102321] sd 2:0:0:0: [sdb] Write Protect is off
    [ 1.102325] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.102350] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.103373] usb 2-2: new high speed USB device number 2 using ehci_hcd
    [ 1.104870] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.104875] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.105203] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [ 1.127901] sdb: sdb1
    [ 1.128208] sd 2:0:0:0: [sdb] Attached SCSI disk
    [ 1.135068] sda: sda1 sda2 sda3
    [ 1.135397] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.343378] usb 2-4: new high speed USB device number 3 using ehci_hcd
    [ 1.373352] Refined TSC clocksource calibration: 1828.949 MHz.
    [ 1.373358] Switching to clocksource tsc
    [ 1.541611] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.586684] usb 4-2: new low speed USB device number 2 using uhci_hcd
    [ 3.620978] udevd[241]: starting version 174
    [ 3.860528] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 3.860538] ACPI: Power Button [PWRB]
    [ 3.860977] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 3.860983] ACPI: Sleep Button [SLPB]
    [ 3.862532] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    [ 3.863014] ACPI: Lid Switch [LID]
    [ 3.864840] ACPI: AC Adapter [ACAD] (on-line)
    [ 3.865293] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 3.865301] ACPI: Power Button [PWRF]
    [ 3.954841] ACPI: acpi_idle registered with cpuidle
    [ 3.958941] Monitor-Mwait will be used to enter C-1 state
    [ 3.959002] Monitor-Mwait will be used to enter C-2 state
    [ 3.959024] [Firmware Bug]: Invalid critical threshold (0)
    [ 3.959341] Monitor-Mwait will be used to enter C-3 state
    [ 3.959379] Marking TSC unstable due to TSC halts in idle
    [ 3.960679] Switching to clocksource hpet
    [ 3.961405] thermal LNXTHERM:00: registered as thermal_zone0
    [ 3.961408] ACPI: Thermal Zone [THR1] (49 C)
    [ 3.964908] acpi device:05: registered as cooling_device1
    [ 3.965003] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5
    [ 3.965627] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    [ 3.979488] r592 0000:09:09.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 3.979831] r592: driver successfully loaded
    [ 4.034101] ACPI: Battery Slot [BAT0] (battery present)
    [ 4.114730] iTCO_vendor_support: vendor-support=0
    [ 4.188196] wmi: Mapper loaded
    [ 4.223279] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 4.223440] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
    [ 4.224124] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.283008] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    [ 4.327775] sdhci: Secure Digital Host Controller Interface driver
    [ 4.327778] sdhci: Copyright(c) Pierre Ossman
    [ 4.337983] sdhci-pci 0000:09:09.1: SDHCI controller found [1180:0822] (rev 22)
    [ 4.338003] sdhci-pci 0000:09:09.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 4.339134] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 4.339152] _regulator_get: 0000:09:09.1 supply vmmc not found, using dummy regulator
    [ 4.340202] Registered led device: mmc0::
    [ 4.341284] mmc0: SDHCI controller on PCI [0000:09:09.1] using DMA
    [ 4.341896] firewire_ohci 0000:09:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 4.348208] [drm] Initialized drm 1.1.0 20060810
    [ 4.374187] input: Genius 4D Scroll Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input6
    [ 4.374312] generic-usb 0003:0458:0056.0001: input,hidraw0: USB HID v1.10 Mouse [Genius 4D Scroll Mouse] on usb-0000:00:1a.1-2/input0
    [ 4.374333] usbcore: registered new interface driver usbhid
    [ 4.374336] usbhid: USB HID core driver
    [ 4.394502] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 4.394529] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 4.394593] r8169 0000:08:00.0: setting latency timer to 64
    [ 4.394688] r8169 0000:08:00.0: irq 45 for MSI/MSI-X
    [ 4.394951] r8169 0000:08:00.0: eth0: RTL8168b/8111b at 0xffffc900115c0000, 00:1e:68:22:0d:d6, XID 18000000 IRQ 45
    [ 4.400195] firewire_ohci: Added fw-ohci device 0000:09:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
    [ 4.420843] Initializing USB Mass Storage driver...
    [ 4.420973] scsi5 : usb-storage 2-2:1.0
    [ 4.421105] usbcore: registered new interface driver usb-storage
    [ 4.421107] USB Mass Storage support registered.
    [ 4.429004] input: HP WMI hotkeys as /devices/virtual/input/input7
    [ 4.438830] Linux media interface: v0.10
    [ 4.439547] usbcore: registered new interface driver uas
    [ 4.441419] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.472037] Linux video capture interface: v2.00
    [ 4.486614] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b023)
    [ 4.492079] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input8
    [ 4.492141] usbcore: registered new interface driver uvcvideo
    [ 4.492144] USB Video Class driver (v1.1.0)
    [ 4.629028] nouveau 0000:01:00.0: power state changed by ACPI to D0
    [ 4.629035] nouveau 0000:01:00.0: power state changed by ACPI to D0
    [ 4.629046] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 4.629054] nouveau 0000:01:00.0: setting latency timer to 64
    [ 4.631355] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086500a2)
    [ 4.638843] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
    [ 4.660115] r852 0000:09:09.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 4.663396] r852: Non dma capable device detected, dma disabled
    [ 4.663425] r852: driver loaded successfully
    [ 4.728189] [drm] nouveau 0000:01:00.0: ... appears to be valid
    [ 4.728195] [drm] nouveau 0000:01:00.0: BIT BIOS found
    [ 4.728198] [drm] nouveau 0000:01:00.0: Bios version 60.86.4f.00
    [ 4.728203] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
    [ 4.728205] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
    [ 4.728208] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
    [ 4.728212] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00000034
    [ 4.728215] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028
    [ 4.728218] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02022312 00020010
    [ 4.728221] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 010333f1 00c0c080
    [ 4.728223] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 0000000e 00000000
    [ 4.728227] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
    [ 4.728231] [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff
    [ 4.728235] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
    [ 4.728238] [drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07
    [ 4.728241] [drm] nouveau 0000:01:00.0: 3: 0x00000310: type 0x10 idx 3 tag 0xff
    [ 4.728245] [drm] nouveau 0000:01:00.0: 4: 0x00000311: type 0x11 idx 4 tag 0xff
    [ 4.728248] [drm] nouveau 0000:01:00.0: 5: 0x00000313: type 0x13 idx 5 tag 0xff
    [ 4.728254] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC581
    [ 4.751487] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC8D1
    [ 4.767845] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD512
    [ 4.767855] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD604
    [ 4.768931] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD7FE
    [ 4.768933] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD863
    [ 4.783649] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
    [ 4.783652] iwl3945: Copyright(c) 2003-2011 Intel Corporation
    [ 4.783734] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 4.783750] iwl3945 0000:02:00.0: setting latency timer to 64
    [ 4.788943] [drm] nouveau 0000:01:00.0: 0xD863: Condition still not met after 20ms, skipping following opcodes
    [ 4.808414] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
    [ 4.808421] [drm] nouveau 0000:01:00.0: 0: memory 100MHz core 169MHz shader 338MHz voltage 1150mV fanspeed 100% timing 0
    [ 4.808426] [drm] nouveau 0000:01:00.0: 1: memory 200MHz core 275MHz shader 550MHz voltage 1150mV fanspeed 100% timing 1
    [ 4.808432] [drm] nouveau 0000:01:00.0: 2: memory 400MHz core 500MHz shader 1000MHz voltage 1200mV fanspeed 100% timing 3
    [ 4.808451] [drm] nouveau 0000:01:00.0: c: memory 199MHz core 275MHz shader 550MHz voltage 1200mV
    [ 4.810122] [TTM] Zone kernel: Available graphics memory: 1546316 kiB.
    [ 4.810125] [TTM] Initializing pool allocator.
    [ 4.810148] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
    [ 4.816384] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
    [ 4.836699] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 4.836784] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 4.836842] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 4.845258] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
    [ 4.845263] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
    [ 4.845413] iwl3945 0000:02:00.0: irq 47 for MSI/MSI-X
    [ 4.845721] Registered led device: phy0-led
    [ 4.882355] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
    [ 4.882624] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
    [ 4.882627] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
    [ 4.882815] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
    [ 4.885055] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 4.885059] [drm] No driver support for vblank timestamp query.
    [ 4.900126] firewire_core: created device fw0: GUID 00241b00e8a3be00, S400
    [ 5.098009] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
    [ 5.101986] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x40000000, bo ffff8800b9a04800
    [ 5.102069] fbcon: nouveaufb (fb0) is primary device
    [ 5.111353] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000/0x0
    [ 5.167210] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 5.167290] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 5.218616] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
    [ 5.421315] scsi 5:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
    [ 5.422661] sd 5:0:0:0: [sdc] 7827456 512-byte logical blocks: (4.00 GB/3.73 GiB)
    [ 5.423168] sd 5:0:0:0: [sdc] Write Protect is off
    [ 5.423172] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
    [ 5.423672] sd 5:0:0:0: [sdc] No Caching mode page present
    [ 5.423675] sd 5:0:0:0: [sdc] Assuming drive cache: write through
    [ 5.429540] sd 5:0:0:0: [sdc] No Caching mode page present
    [ 5.429543] sd 5:0:0:0: [sdc] Assuming drive cache: write through
    [ 5.430063] sdc: sdc1
    [ 5.432036] sd 5:0:0:0: [sdc] No Caching mode page present
    [ 5.432040] sd 5:0:0:0: [sdc] Assuming drive cache: write through
    [ 5.432042] sd 5:0:0:0: [sdc] Attached SCSI removable disk
    [ 6.160954] Console: switching to colour frame buffer device 180x56
    [ 6.163432] fb0: nouveaufb frame buffer device
    [ 6.163434] drm: registered panic notifier
    [ 6.163442] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
    [ 6.732886] EXT4-fs (sda3): re-mounted. Opts: (null)
    [ 6.950620] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [ 6.966588] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 7.084796] Adding 4000180k swap on /dev/sda2. Priority:-1 extents:1 across:4000180k
    [ 9.143563] r8169 0000:08:00.0: eth0: link down
    [ 9.143572] r8169 0000:08:00.0: eth0: link down
    [ 11.625158] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
    [ 13.659460] NET: Registered protocol family 10
    [ 13.660273] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 13.660460] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 13.816958] FS-Cache: Loaded
    [ 13.841072] FS-Cache: Netfs 'cifs' registered for caching
    [ 13.871446] CIFS VFS: Error connecting to socket. Aborting operation
    [ 13.880618] CIFS VFS: cifs_mount failed w/return code = -101
    [ 13.884067] CIFS VFS: Error connecting to socket. Aborting operation
    [ 13.897017] CIFS VFS: cifs_mount failed w/return code = -101
    [ 13.901572] CIFS VFS: Error connecting to socket. Aborting operation
    [ 13.913913] CIFS VFS: cifs_mount failed w/return code = -101
    [ 13.917007] CIFS VFS: Error connecting to socket. Aborting operation
    [ 13.930569] CIFS VFS: cifs_mount failed w/return code = -101
    [ 16.370722] wlan0: authenticate with 00:26:4d:36:95:d0 (try 1)
    [ 16.372460] wlan0: authenticated
    [ 16.375907] wlan0: associate with 00:26:4d:36:95:d0 (try 1)
    [ 16.386877] wlan0: RX AssocResp from 00:26:4d:36:95:d0 (capab=0x411 status=0 aid=1)
    [ 16.386885] wlan0: associated
    [ 16.389143] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 16.491123] Intel AES-NI instructions are not detected.
    [ 16.677727] padlock_aes: VIA PadLock not detected.
    [ 27.296946] wlan0: no IPv6 routers present
    [ 50.863694] r8169 0000:08:00.0: eth0: link up
    [ 50.864363] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 54.661658] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.1
    [ 61.110061] eth0: no IPv6 routers present
    [ 356.785500] wlan0: deauthenticated from 00:26:4d:36:95:d0 (Reason: 3)
    [ 356.840075] cfg80211: Calling CRDA for country: DE
    [ 360.656160] wlan0: authenticate with 00:26:4d:36:95:d0 (try 1)
    [ 360.658086] wlan0: authenticated
    [ 360.658215] wlan0: associate with 00:26:4d:36:95:d0 (try 1)
    [ 360.670543] wlan0: RX ReassocResp from 00:26:4d:36:95:d0 (capab=0x411 status=0 aid=1)
    [ 360.670550] wlan0: associated
    The slow startup would not be a problem but netfs and mpd do not like it when the network is not up when they start (mpd music dir is on a network share), so I have to manually restart netfs every time I reboot.
    Other computers on the same network do not have the same problem, so I do not think it has anything to with the router.
    Is there anything I can do to make my ethernet card initialize faster?
    If you need any more information, please ask.
    Last edited by rtoijala (2011-11-07 14:32:27)

    Strike0 wrote:... but dont you need some sort of dhcp client/or daemon for that as well?
    Try adding dhcpd to your rc.conf array.
    Netcfg seems to automatically start dhcpcd (I can see it htop).
    Strike0 wrote:Alternatively check this: https://wiki.archlinux.org/index.php/Ne … _of_dhcpcd
    This did not change the time. The only change was that netcfg started dhclient instead of dhcpcd.
    Strike0 wrote:what happens if you pull the network cable after it got the link, wait until network is unreachable and then plug it in again? Does that take 40 seconds as well for the new dhcp lease?
    Yes, it takes 40-60 seconds to get a connection after plugging the cable in again.
    ratcheer wrote:What driver is your kernel loading? I have a very similar Realtek ethernet controller and it does not work well at all with the kernel's default r8169 driver. I had to go to Realtek's website and download the older driver r8168, which works perfectly for me.
    My kernel is loading r8169. r8168 is available in the AUR. I'm going to try it as soon as I can.
    Thanks.
    EDIT: r8168 needed only 10 seconds from loading the driver to having a connection. Thank you for the tip! Including [SOLVED] in thread topic.
    Last edited by rtoijala (2011-11-07 14:32:47)

  • Help!! Kernel panics after installation!!

    Hi,
    I am new to Arch Linux (migrating from Fedora). I am having some problems with the installation on my Sony VAIO CW (C2D, Nvidia GT230M). At first I couldn't get past the installation of X in the Beginner's guide, but after some tweaking with conf files I finally got it to work. But after reboot, kernel panic occured. This started happening intermittently from there onwards. Then I tried to install GNOME which failed miserably as in it panics and crashes everytime system starts.
    Then I tried KDE and things are much better compared to GNOME. The problem is whenever I try logging into a new KDE session, kernel panics. Only KDE Failsafe mode works (with sound). I honestly dont know what to do as I have no idea why the problem is occuring also. I plan to stay with Arch, as nouveau works much better than it used to in Fedora (3d support). Can anybody help with this issue?
    Linux myhost 2.6.36-ARCH #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010 x86_64 Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz GenuineIntel GNU/Linux
    10-nouveau.conf
    Section "Device"
    Identifier "n"
    Driver "nouveau"
    EndSection
    Xorg.0.log
    [ 50.605]
    X.Org X Server 1.9.2
    Release Date: 2010-10-30
    [ 50.605] X Protocol Version 11, Revision 0
    [ 50.605] Build Operating System: Linux 2.6.35-ARCH x86_64
    [ 50.605] Current Operating System: Linux myhost 2.6.36-ARCH #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010 x86_64
    [ 50.605] Kernel command line: root=/dev/sda5 ro
    [ 50.605] Build Date: 01 November 2010 10:29:19PM
    [ 50.605]
    [ 50.605] Current version of pixman: 0.20.0
    [ 50.605] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 50.605] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 50.605] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 28 01:33:51 2010
    [ 50.606] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 50.617] (==) No Layout section. Using the first Screen section.
    [ 50.617] (==) No screen section available. Using defaults.
    [ 50.617] (**) |-->Screen "Default Screen Section" (0)
    [ 50.617] (**) | |-->Monitor "<default monitor>"
    [ 50.617] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 50.617] (**) | |-->Device "n"
    [ 50.617] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 50.617] (==) Automatically adding devices
    [ 50.617] (==) Automatically enabling devices
    [ 50.618] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 50.618] Entry deleted from font path.
    [ 50.618] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 50.618] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 50.618] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 50.618] (II) Loader magic: 0x7d3360
    [ 50.618] (II) Module ABI versions:
    [ 50.618] X.Org ANSI C Emulation: 0.4
    [ 50.618] X.Org Video Driver: 8.0
    [ 50.618] X.Org XInput driver : 11.0
    [ 50.618] X.Org Server Extension : 4.0
    [ 50.619] (--) PCI:*(0:1:0:0) 10de:0a2a:104d:905e rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
    [ 50.619] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 50.619] (II) LoadModule: "extmod"
    [ 50.620] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 50.629] (II) Module extmod: vendor="X.Org Foundation"
    [ 50.629] compiled for 1.9.2, module version = 1.0.0
    [ 50.629] Module class: X.Org Server Extension
    [ 50.629] ABI class: X.Org Server Extension, version 4.0
    [ 50.629] (II) Loading extension MIT-SCREEN-SAVER
    [ 50.629] (II) Loading extension XFree86-VidModeExtension
    [ 50.629] (II) Loading extension XFree86-DGA
    [ 50.629] (II) Loading extension DPMS
    [ 50.629] (II) Loading extension XVideo
    [ 50.629] (II) Loading extension XVideo-MotionCompensation
    [ 50.629] (II) Loading extension X-Resource
    [ 50.629] (II) LoadModule: "dbe"
    [ 50.630] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 50.637] (II) Module dbe: vendor="X.Org Foundation"
    [ 50.637] compiled for 1.9.2, module version = 1.0.0
    [ 50.637] Module class: X.Org Server Extension
    [ 50.637] ABI class: X.Org Server Extension, version 4.0
    [ 50.637] (II) Loading extension DOUBLE-BUFFER
    [ 50.637] (II) LoadModule: "glx"
    [ 50.637] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 50.650] (II) Module glx: vendor="X.Org Foundation"
    [ 50.650] compiled for 1.9.2, module version = 1.0.0
    [ 50.650] ABI class: X.Org Server Extension, version 4.0
    [ 50.650] (==) AIGLX enabled
    [ 50.650] (II) Loading extension GLX
    [ 50.651] (II) LoadModule: "record"
    [ 50.651] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 50.652] (II) Module record: vendor="X.Org Foundation"
    [ 50.652] compiled for 1.9.2, module version = 1.13.0
    [ 50.652] Module class: X.Org Server Extension
    [ 50.652] ABI class: X.Org Server Extension, version 4.0
    [ 50.652] (II) Loading extension RECORD
    [ 50.652] (II) LoadModule: "dri"
    [ 50.652] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 50.661] (II) Module dri: vendor="X.Org Foundation"
    [ 50.661] compiled for 1.9.2, module version = 1.0.0
    [ 50.661] ABI class: X.Org Server Extension, version 4.0
    [ 50.661] (II) Loading extension XFree86-DRI
    [ 50.661] (II) LoadModule: "dri2"
    [ 50.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 50.662] (II) Module dri2: vendor="X.Org Foundation"
    [ 50.662] compiled for 1.9.2, module version = 1.2.0
    [ 50.662] ABI class: X.Org Server Extension, version 4.0
    [ 50.662] (II) Loading extension DRI2
    [ 50.662] (II) LoadModule: "nouveau"
    [ 50.662] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 50.675] (II) Module nouveau: vendor="X.Org Foundation"
    [ 50.675] compiled for 1.9.0, module version = 0.0.16
    [ 50.675] Module class: X.Org Video Driver
    [ 50.675] ABI class: X.Org Video Driver, version 8.0
    [ 50.675] (II) NOUVEAU driver
    [ 50.675] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 50.675] RIVA TNT (NV04)
    [ 50.675] RIVA TNT2 (NV05)
    [ 50.675] GeForce 256 (NV10)
    [ 50.675] GeForce 2 (NV11, NV15)
    [ 50.675] GeForce 4MX (NV17, NV18)
    [ 50.675] GeForce 3 (NV20)
    [ 50.675] GeForce 4Ti (NV25, NV28)
    [ 50.675] GeForce FX (NV3x)
    [ 50.675] GeForce 6 (NV4x)
    [ 50.675] GeForce 7 (G7x)
    [ 50.675] GeForce 8 (G8x)
    [ 50.675] (++) using VT number 7
    [ 50.676] drmOpenDevice: node name is /dev/dri/card0
    [ 50.676] drmOpenDevice: open result is 7, (OK)
    [ 50.676] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 50.676] drmOpenDevice: node name is /dev/dri/card0
    [ 50.676] drmOpenDevice: open result is 7, (OK)
    [ 50.676] drmOpenByBusid: drmOpenMinor returns 7
    [ 50.676] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 50.676] (II) [drm] nouveau interface version: 0.0.16
    [ 50.676] (II) Loading sub module "dri"
    [ 50.676] (II) LoadModule: "dri"
    [ 50.677] (II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
    [ 50.677] (II) NOUVEAU(0): Loaded DRI module
    [ 50.677] drmOpenDevice: node name is /dev/dri/card0
    [ 50.677] drmOpenDevice: open result is 8, (OK)
    [ 50.677] drmOpenDevice: node name is /dev/dri/card0
    [ 50.677] drmOpenDevice: open result is 8, (OK)
    [ 50.677] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 50.677] drmOpenDevice: node name is /dev/dri/card0
    [ 50.677] drmOpenDevice: open result is 8, (OK)
    [ 50.677] drmOpenByBusid: drmOpenMinor returns 8
    [ 50.677] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 50.677] (II) [drm] DRM interface version 1.4
    [ 50.677] (II) [drm] DRM open master succeeded.
    [ 50.677] (--) NOUVEAU(0): Chipset: "NVIDIA NVa5"
    [ 50.677] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 50.677] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 50.677] (==) NOUVEAU(0): RGB weight 888
    [ 50.677] (==) NOUVEAU(0): Default visual is TrueColor
    [ 50.677] (==) NOUVEAU(0): Using HW cursor
    [ 50.696] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
    [ 50.794] (II) NOUVEAU(0): Output VGA-1 has no monitor section
    [ 50.803] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
    [ 50.804] (II) NOUVEAU(0): EDID for output LVDS-1
    [ 50.804] (II) NOUVEAU(0): Manufacturer: SNY Model: 5fa Serial#: 0
    [ 50.804] (II) NOUVEAU(0): Year: 2002 Week: 45
    [ 50.804] (II) NOUVEAU(0): EDID Version: 1.4
    [ 50.804] (II) NOUVEAU(0): Digital Display Input
    [ 50.804] (II) NOUVEAU(0): 6 bits per channel
    [ 50.804] (II) NOUVEAU(0): Digital interface is undefined
    [ 50.804] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 31 vert.: 17
    [ 50.804] (II) NOUVEAU(0): Gamma: 1.00
    [ 50.804] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
    [ 50.804] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 50.804] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 50.804] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
    [ 50.804] (II) NOUVEAU(0): redX: 0.600 redY: 0.342 greenX: 0.295 greenY: 0.570
    [ 50.804] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.111 whiteX: 0.312 whiteY: 0.328
    [ 50.804] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 50.804] (II) NOUVEAU(0): Supported detailed timing:
    [ 50.804] (II) NOUVEAU(0): clock: 72.0 MHz Image Size: 309 x 174 mm
    [ 50.804] (II) NOUVEAU(0): h_active: 1366 h_sync: 1424 h_sync_end 1482 h_blank_end 1540 h_border: 0
    [ 50.804] (II) NOUVEAU(0): v_active: 768 v_sync: 772 v_sync_end 776 v_blanking: 780 v_border: 0
    [ 50.804] (II) NOUVEAU(0): Monitor name: Nvidia Defaul
    [ 50.804] (II) NOUVEAU(0): Monitor name: t Flat Panel
    [ 50.804] (II) NOUVEAU(0): Ranges: V min: 0 V max: 61 Hz, H min: 29 H max: 47 kHz, PixClock max 85 MHz
    [ 50.804] (II) NOUVEAU(0): EDID (in hex):
    [ 50.804] (II) NOUVEAU(0): 00ffffffffffff004dd9fa0500000000
    [ 50.804] (II) NOUVEAU(0): 2d0c0104901f1100eaa8e099574b9225
    [ 50.804] (II) NOUVEAU(0): 1c505400000001010101010101010101
    [ 50.804] (II) NOUVEAU(0): 010101010101201c56ae50000c303a3a
    [ 50.804] (II) NOUVEAU(0): 440035ae10000018000000fc004e7669
    [ 50.804] (II) NOUVEAU(0): 6469612044656661756c000000fc0074
    [ 50.804] (II) NOUVEAU(0): 20466c61742050616e656c00000000fd
    [ 50.804] (II) NOUVEAU(0): 00003d1d2f0800002020202020000003
    [ 50.804] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
    [ 50.804] (II) NOUVEAU(0): Using EDID range info for horizontal sync
    [ 50.804] (II) NOUVEAU(0): Using EDID range info for vertical refresh
    [ 50.804] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 50.804] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
    [ 50.804] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
    [ 50.804] (II) NOUVEAU(0): Modeline "1366x768"x59.9 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
    [ 50.804] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
    [ 50.804] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
    [ 50.804] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
    [ 50.804] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz)
    [ 50.804] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
    [ 50.804] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
    [ 50.903] (II) NOUVEAU(0): EDID for output VGA-1
    [ 50.912] (II) NOUVEAU(0): EDID for output HDMI-1
    [ 50.912] (II) NOUVEAU(0): Output LVDS-1 connected
    [ 50.912] (II) NOUVEAU(0): Output VGA-1 disconnected
    [ 50.912] (II) NOUVEAU(0): Output HDMI-1 disconnected
    [ 50.912] (II) NOUVEAU(0): Using exact sizes for initial modes
    [ 50.912] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1366x768
    [ 50.912] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 50.912] (--) NOUVEAU(0): Virtual size is 1366x768 (pitch 1376)
    [ 50.912] (**) NOUVEAU(0): Driver mode "1366x768": 72.0 MHz (scaled from 0.0 MHz), 46.8 kHz, 59.9 Hz
    [ 50.912] (II) NOUVEAU(0): Modeline "1366x768"x59.9 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
    [ 50.912] (**) NOUVEAU(0): Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
    [ 50.912] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
    [ 50.912] (**) NOUVEAU(0): Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
    [ 50.912] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
    [ 50.912] (**) NOUVEAU(0): Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
    [ 50.912] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
    [ 50.912] (**) NOUVEAU(0): Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
    [ 50.912] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz)
    [ 50.912] (**) NOUVEAU(0): Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
    [ 50.912] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
    [ 50.912] (**) NOUVEAU(0): Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
    [ 50.912] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
    [ 50.912] (**) NOUVEAU(0): Display dimensions: (310, 170) mm
    [ 50.912] (**) NOUVEAU(0): DPI set to (111, 114)
    [ 50.912] (II) Loading sub module "wfb"
    [ 50.912] (II) LoadModule: "wfb"
    [ 50.912] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 50.972] (II) Module wfb: vendor="X.Org Foundation"
    [ 50.972] compiled for 1.9.2, module version = 1.0.0
    [ 50.972] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 50.972] (II) Loading sub module "fb"
    [ 50.972] (II) LoadModule: "fb"
    [ 50.972] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 50.992] (II) Module fb: vendor="X.Org Foundation"
    [ 50.992] compiled for 1.9.2, module version = 1.0.0
    [ 50.992] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 50.992] (II) Loading sub module "exa"
    [ 50.992] (II) LoadModule: "exa"
    [ 50.992] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 50.993] (II) Module exa: vendor="X.Org Foundation"
    [ 50.993] compiled for 1.9.2, module version = 2.5.0
    [ 50.993] ABI class: X.Org Video Driver, version 8.0
    [ 50.993] (II) Loading sub module "shadowfb"
    [ 50.993] (II) LoadModule: "shadowfb"
    [ 50.994] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 50.994] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 50.994] compiled for 1.9.2, module version = 1.0.0
    [ 50.994] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 50.994] (--) Depth 24 pixmap format is 32 bpp
    [ 50.999] (II) NOUVEAU(0): Opened GPU channel 2
    [ 50.999] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 50.999] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 50.999] (II) NOUVEAU(0): GART: 512MiB available
    [ 51.001] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
    [ 51.027] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 51.027] (II) EXA(0): Driver registered support for the following operations:
    [ 51.027] (II) Solid
    [ 51.027] (II) Copy
    [ 51.027] (II) Composite (RENDER acceleration)
    [ 51.027] (II) UploadToScreen
    [ 51.027] (II) DownloadFromScreen
    [ 51.027] (==) NOUVEAU(0): Backing store disabled
    [ 51.027] (==) NOUVEAU(0): Silken mouse enabled
    [ 51.029] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 51.029] (II) NOUVEAU(0): [XvMC] Extension initialized.
    [ 51.029] (==) NOUVEAU(0): DPMS enabled
    [ 51.029] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 51.029] (--) RandR disabled
    [ 51.029] (II) Initializing built-in extension Generic Event Extension
    [ 51.029] (II) Initializing built-in extension SHAPE
    [ 51.029] (II) Initializing built-in extension MIT-SHM
    [ 51.029] (II) Initializing built-in extension XInputExtension
    [ 51.029] (II) Initializing built-in extension XTEST
    [ 51.029] (II) Initializing built-in extension BIG-REQUESTS
    [ 51.029] (II) Initializing built-in extension SYNC
    [ 51.029] (II) Initializing built-in extension XKEYBOARD
    [ 51.029] (II) Initializing built-in extension XC-MISC
    [ 51.029] (II) Initializing built-in extension SECURITY
    [ 51.029] (II) Initializing built-in extension XINERAMA
    [ 51.029] (II) Initializing built-in extension XFIXES
    [ 51.029] (II) Initializing built-in extension RENDER
    [ 51.029] (II) Initializing built-in extension RANDR
    [ 51.029] (II) Initializing built-in extension COMPOSITE
    [ 51.029] (II) Initializing built-in extension DAMAGE
    [ 51.225] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 51.225] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 51.225] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 51.225] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 51.225] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/nouveau_dri.so
    [ 51.225] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 51.227] (II) NOUVEAU(0): NVEnterVT is called.
    [ 51.245] (II) NOUVEAU(0): Setting screen physical size to 361 x 203
    [ 51.245] resize called 1366 768
    [ 51.660] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event5)
    [ 51.660] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
    [ 51.660] (II) LoadModule: "evdev"
    [ 51.660] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 51.676] (II) Module evdev: vendor="X.Org Foundation"
    [ 51.676] compiled for 1.9.0, module version = 2.5.0
    [ 51.676] Module class: X.Org XInput Driver
    [ 51.676] ABI class: X.Org XInput driver, version 11.0
    [ 51.676] (**) Sony Vaio Keys: always reports core events
    [ 51.676] (**) Sony Vaio Keys: Device: "/dev/input/event5"
    [ 51.700] (--) Sony Vaio Keys: Found keys
    [ 51.700] (II) Sony Vaio Keys: Configuring as keyboard
    [ 51.700] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
    [ 51.700] (**) Option "xkb_rules" "evdev"
    [ 51.700] (**) Option "xkb_model" "evdev"
    [ 51.700] (**) Option "xkb_layout" "us"
    [ 51.723] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    [ 51.723] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 51.723] (**) Video Bus: always reports core events
    [ 51.723] (**) Video Bus: Device: "/dev/input/event4"
    [ 51.726] (--) Video Bus: Found keys
    [ 51.726] (II) Video Bus: Configuring as keyboard
    [ 51.726] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    [ 51.726] (**) Option "xkb_rules" "evdev"
    [ 51.726] (**) Option "xkb_model" "evdev"
    [ 51.726] (**) Option "xkb_layout" "us"
    [ 51.743] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 51.743] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 51.743] (**) Power Button: always reports core events
    [ 51.743] (**) Power Button: Device: "/dev/input/event2"
    [ 51.756] (--) Power Button: Found keys
    [ 51.756] (II) Power Button: Configuring as keyboard
    [ 51.756] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 51.756] (**) Option "xkb_rules" "evdev"
    [ 51.756] (**) Option "xkb_model" "evdev"
    [ 51.756] (**) Option "xkb_layout" "us"
    [ 51.757] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 51.757] (II) No input driver/identifier specified (ignoring)
    [ 51.760] (II) config/udev: Adding input device UVC Camera (05ca:18b5) (/dev/input/event7)
    [ 51.760] (**) UVC Camera (05ca:18b5): Applying InputClass "evdev keyboard catchall"
    [ 51.760] (**) UVC Camera (05ca:18b5): always reports core events
    [ 51.760] (**) UVC Camera (05ca:18b5): Device: "/dev/input/event7"
    [ 51.783] (--) UVC Camera (05ca:18b5): Found keys
    [ 51.783] (II) UVC Camera (05ca:18b5): Configuring as keyboard
    [ 51.783] (II) XINPUT: Adding extended input device "UVC Camera (05ca:18b5)" (type: KEYBOARD)
    [ 51.783] (**) Option "xkb_rules" "evdev"
    [ 51.783] (**) Option "xkb_model" "evdev"
    [ 51.783] (**) Option "xkb_layout" "us"
    [ 51.784] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
    [ 51.784] (II) No input driver/identifier specified (ignoring)
    [ 51.786] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10)
    [ 51.786] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 51.786] (**) Logitech USB Receiver: always reports core events
    [ 51.786] (**) Logitech USB Receiver: Device: "/dev/input/event10"
    [ 51.800] (--) Logitech USB Receiver: Found 20 mouse buttons
    [ 51.800] (--) Logitech USB Receiver: Found scroll wheel(s)
    [ 51.800] (--) Logitech USB Receiver: Found relative axes
    [ 51.800] (--) Logitech USB Receiver: Found x and y relative axes
    [ 51.800] (II) Logitech USB Receiver: Configuring as mouse
    [ 51.800] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 51.800] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 51.800] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
    [ 51.800] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 51.800] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 51.800] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 51.800] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 51.800] (II) Logitech USB Receiver: initialized for relative axes.
    [ 51.800] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse2)
    [ 51.800] (II) No input driver/identifier specified (ignoring)
    [ 51.801] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event11)
    [ 51.801] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 51.801] (**) Logitech USB Receiver: always reports core events
    [ 51.801] (**) Logitech USB Receiver: Device: "/dev/input/event11"
    [ 51.816] (--) Logitech USB Receiver: Found 1 mouse buttons
    [ 51.816] (--) Logitech USB Receiver: Found scroll wheel(s)
    [ 51.816] (--) Logitech USB Receiver: Found relative axes
    [ 51.816] (--) Logitech USB Receiver: Found absolute axes
    [ 51.816] (--) Logitech USB Receiver: Found keys
    [ 51.816] (II) Logitech USB Receiver: Configuring as mouse
    [ 51.816] (II) Logitech USB Receiver: Configuring as keyboard
    [ 51.816] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 51.816] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 51.816] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
    [ 51.816] (**) Option "xkb_rules" "evdev"
    [ 51.816] (**) Option "xkb_model" "evdev"
    [ 51.816] (**) Option "xkb_layout" "us"
    [ 51.816] (EE) Logitech USB Receiver: failed to initialize for relative axes.
    [ 51.817] (II) Logitech USB Receiver: initialized for absolute axes.
    [ 51.821] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 51.821] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 51.821] (**) AT Translated Set 2 keyboard: always reports core events
    [ 51.821] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 51.843] (--) AT Translated Set 2 keyboard: Found keys
    [ 51.843] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 51.843] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 51.843] (**) Option "xkb_rules" "evdev"
    [ 51.843] (**) Option "xkb_model" "evdev"
    [ 51.843] (**) Option "xkb_layout" "us"
    [ 51.843] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
    [ 51.843] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 51.843] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 51.844] (**) SynPS/2 Synaptics TouchPad: Device: "/dev/input/event8"
    [ 51.856] (--) SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
    [ 51.856] (--) SynPS/2 Synaptics TouchPad: Found absolute axes
    [ 51.856] (--) SynPS/2 Synaptics TouchPad: Found x and y absolute axes
    [ 51.856] (--) SynPS/2 Synaptics TouchPad: Found absolute touchpad.
    [ 51.856] (II) SynPS/2 Synaptics TouchPad: Configuring as touchpad
    [ 51.856] (**) SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
    [ 51.856] (**) SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 51.856] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    [ 51.856] (II) SynPS/2 Synaptics TouchPad: initialized for absolute axes.
    [ 51.857] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 51.857] (II) No input driver/identifier specified (ignoring)
    [ 51.857] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 51.857] (II) No input driver/identifier specified (ignoring)
    [ 51.858] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event6)
    [ 51.858] (II) No input driver/identifier specified (ignoring)
    [ 51.858] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
    [ 51.858] (II) No input driver/identifier specified (ignoring)
    [ 80.420] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
    [ 80.420] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 80.420] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 80.420] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 80.420] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
    dmesg.log
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010
    Command line: root=/dev/sda5 ro
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
    BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bdea7000 (usable)
    BIOS-e820: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
    BIOS-e820: 00000000bdecf000 - 00000000bdee0000 (reserved)
    BIOS-e820: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
    BIOS-e820: 00000000bdee1000 - 00000000bdf08000 (reserved)
    BIOS-e820: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
    BIOS-e820: 00000000bdf09000 - 00000000bdf0a000 (reserved)
    BIOS-e820: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
    BIOS-e820: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
    BIOS-e820: 00000000bdf1a000 - 00000000bdf39000 (reserved)
    BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
    BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    NX (Execute Disable) protection: active
    DMI 2.4 present.
    AMI BIOS detected: BIOS may corrupt low RAM, working around it.
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    No AGP bridge found
    last_pfn = 0x140000 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-CFFFF write-protect
    D0000-E7FFF write-through
    E8000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask F80000000 write-back
    1 base 080000000 mask FC0000000 write-back
    2 base 0BE000000 mask FFE000000 uncachable
    3 base 100000000 mask FC0000000 write-back
    4 disabled
    5 disabled
    6 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0xbe000 max_arch_pfn = 0x400000000
    Scanning 0 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009bc00 (usable)
    modified: 000000000009bc00 - 00000000000a0000 (reserved)
    modified: 00000000000e0000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 00000000bdea7000 (usable)
    modified: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
    modified: 00000000bdecf000 - 00000000bdee0000 (reserved)
    modified: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
    modified: 00000000bdee1000 - 00000000bdf08000 (reserved)
    modified: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
    modified: 00000000bdf09000 - 00000000bdf0a000 (reserved)
    modified: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
    modified: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
    modified: 00000000bdf1a000 - 00000000bdf39000 (reserved)
    modified: 00000000bdf39000 - 00000000be000000 (usable)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
    modified: 00000000ffe00000 - 0000000100000000 (reserved)
    modified: 0000000100000000 - 0000000140000000 (usable)
    initial memory mapped : 0 - 20000000
    found SMP MP-table at [ffff8800000fd690] fd690
    init_memory_mapping: 0000000000000000-00000000be000000
    0000000000 - 00be000000 page 2M
    kernel direct mapping tables up to be000000 @ 16000-1a000
    init_memory_mapping: 0000000100000000-0000000140000000
    0100000000 - 0140000000 page 2M
    kernel direct mapping tables up to 140000000 @ 18000-1e000
    RAMDISK: 37e39000 - 37ff0000
    ACPI: RSDP 00000000000f03b0 00024 (v02 Sony)
    ACPI: XSDT 00000000bdf12f10 0005C (v01 Sony VAIO 20090922 MSFT 00010013)
    ACPI: FACP 00000000bdf08a90 000F4 (v04 Sony VAIO 20090922 MSFT 00010013)
    ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
    ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40, using 32 (20100702/tbfadt-486)
    ACPI: DSDT 00000000bdf0a010 06831 (v01 Sony VAIO 20090922 INTL 20051117)
    ACPI: FACS 00000000bdf19e40 00040
    ACPI: APIC 00000000bdf11f10 0006C (v02 Sony VAIO 20090922 MSFT 00010013)
    ACPI: MCFG 00000000bdf18c90 0003C (v01 Sony VAIO 20090922 MSFT 00000097)
    ACPI: HPET 00000000bdf18c10 00038 (v01 Sony VAIO 20090922 MSFT 00010013)
    ACPI: SLIC 00000000bdf14c10 00176 (v01 Sony VAIO 20090922 Sony 01000000)
    ACPI: SSDT 00000000bdee0590 00505 (v01 Sony VAIO 20090922 INTL 20051117)
    ACPI: SSDT 00000000bdecbc10 002E4 (v01 Sony VAIO 20090922 INTL 20051117)
    ACPI: Local APIC address 0xfee00000
    [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00140000
    Movable zone start PFN for each node
    early_node_map[4] active PFN ranges
    0: 0x00000010 -> 0x0000009b
    0: 0x00000100 -> 0x000bdea7
    0: 0x000bdf39 -> 0x000be000
    0: 0x00100000 -> 0x00140000
    On node 0 totalpages: 1040121
    DMA zone: 56 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3923 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 759718 pages, LIFO batch:31
    Normal zone: 3584 pages used for memmap
    Normal zone: 258560 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a301 base: 0xfed00000
    SMP: Allowing 4 CPUs, 2 hotplug CPUs
    nr_irqs_gsi: 40
    early_res array is doubled to 64 at [19300 - 19aff]
    PM: Registered nosave memory: 000000000009b000 - 000000000009c000
    PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    PM: Registered nosave memory: 00000000bdea7000 - 00000000bdecf000
    PM: Registered nosave memory: 00000000bdecf000 - 00000000bdee0000
    PM: Registered nosave memory: 00000000bdee0000 - 00000000bdee1000
    PM: Registered nosave memory: 00000000bdee1000 - 00000000bdf08000
    PM: Registered nosave memory: 00000000bdf08000 - 00000000bdf09000
    PM: Registered nosave memory: 00000000bdf09000 - 00000000bdf0a000
    PM: Registered nosave memory: 00000000bdf0a000 - 00000000bdf14000
    PM: Registered nosave memory: 00000000bdf14000 - 00000000bdf1a000
    PM: Registered nosave memory: 00000000bdf1a000 - 00000000bdf39000
    PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
    PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
    PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
    PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
    PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
    Allocating PCI resources starting at be000000 (gap: be000000:22000000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u524288
    early_res array is doubled to 128 at [19b00 - 1aaff]
    pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
    pcpu-alloc: [0] 0 1 2 3
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1022201
    Kernel command line: root=/dev/sda5 ro
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Subtract (69 early reservations)
    #1 [0001000000 - 00017f99a8] TEXT DATA BSS
    #2 [0037e39000 - 0037ff0000] RAMDISK
    #3 [00017fa000 - 00017fa1f8] BRK
    #4 [00000fd6a0 - 0000100000] BIOS reserved
    #5 [00000fd690 - 00000fd6a0] MP-table mpf
    #6 [000009bc00 - 00000fd410] BIOS reserved
    #7 [00000fd624 - 00000fd690] BIOS reserved
    #8 [00000fd410 - 00000fd624] MP-table mpc
    #9 [0000010000 - 0000012000] TRAMPOLINE
    #10 [0000012000 - 0000016000] ACPI WAKEUP
    #11 [0000016000 - 0000018000] PGTABLE
    #12 [0000018000 - 0000019000] PGTABLE
    #13 [00017fa200 - 00017fb200] BOOTMEM
    #14 [0000019000 - 0000019300] BOOTMEM
    #15 [0001ffc000 - 0001ffd000] BOOTMEM
    #16 [0001ffd000 - 0001ffe000] BOOTMEM
    #17 [0002000000 - 0005800000] MEMMAP 0
    #18 [00017fb200 - 0001813200] BOOTMEM
    #19 [0001813200 - 000182b200] BOOTMEM
    #20 [000182b200 - 0001843200] BOOTMEM
    #21 [0001844000 - 0001845000] BOOTMEM
    #22 [00017f99c0 - 00017f9a01] BOOTMEM
    #23 [00017f9a40 - 00017f9a83] BOOTMEM
    #24 [00017f9ac0 - 00017f9ee8] BOOTMEM
    #25 [00017f9f00 - 00017f9f68] BOOTMEM
    #26 [00017f9f80 - 00017f9fe8] BOOTMEM
    #27 [0001843200 - 0001843268] BOOTMEM
    #28 [0001843280 - 00018432e8] BOOTMEM
    #29 [0001843300 - 0001843368] BOOTMEM
    #30 [0001843380 - 00018433e8] BOOTMEM
    #31 [0001843400 - 0001843468] BOOTMEM
    #32 [0001843480 - 00018434e8] BOOTMEM
    #33 [0001843500 - 0001843568] BOOTMEM
    #34 [0001843580 - 00018435e8] BOOTMEM
    #35 [0001843600 - 0001843668] BOOTMEM
    #36 [0001843680 - 00018436e8] BOOTMEM
    #37 [0001843700 - 0001843768] BOOTMEM
    #38 [0001843780 - 00018437e8] BOOTMEM
    #39 [0001843800 - 0001843868] BOOTMEM
    #40 [0001843880 - 00018438e8] BOOTMEM
    #41 [0001843900 - 0001843968] BOOTMEM
    #42 [0001843980 - 00018439e8] BOOTMEM
    #43 [0001843a00 - 0001843a20] BOOTMEM
    #44 [0001843a40 - 0001843a60] BOOTMEM
    #45 [0001843a80 - 0001843aa0] BOOTMEM
    #46 [0001843ac0 - 0001843ad2] BOOTMEM
    #47 [0001843b00 - 0001843b12] BOOTMEM
    #48 [0001a00000 - 0001a1c000] BOOTMEM
    #49 [0001a80000 - 0001a9c000] BOOTMEM
    #50 [0001b00000 - 0001b1c000] BOOTMEM
    #51 [0001b80000 - 0001b9c000] BOOTMEM
    #52 [0001843b40 - 0001843b48] BOOTMEM
    #53 [0001843b80 - 0001843b88] BOOTMEM
    #54 [0001843bc0 - 0001843bd0] BOOTMEM
    #55 [0001843c00 - 0001843c20] BOOTMEM
    #56 [0001843c40 - 0001843d70] BOOTMEM
    #57 [0001843d80 - 0001843dd0] BOOTMEM
    #58 [0001843e00 - 0001843e50] BOOTMEM
    #59 [0001845000 - 000184d000] BOOTMEM
    #60 [0001b9c000 - 0001f9c000] BOOTMEM
    #61 [0005800000 - 0005a00000] BOOTMEM
    #62 [0001843e80 - 0001843e88] BOOTMEM
    #63 [0001843ec0 - 0001843ec8] BOOTMEM
    #64 [000184d000 - 000184d240] BOOTMEM
    #65 [0005a00000 - 0009a00000] BOOTMEM
    #66 [000184d240 - 000186d240] BOOTMEM
    #67 [000186d240 - 00018ad240] BOOTMEM
    #68 [000001ab00 - 0000022b00] BOOTMEM
    Memory: 4020284k/5242880k available (3682k kernel code, 1082396k absent, 140200k reserved, 2083k data, 504k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
    NR_IRQS:2304
    Extended CMOS year: 2000
    Console: colour VGA+ 80x25
    console [tty0] enabled
    allocated 41943040 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 2526.841 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.25 BogoMIPS (lpj=8422803)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    TOMOYO Linux initialized
    AppArmor: AppArmor disabled by boot time parameter
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    Initializing cgroup subsys blkio
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version: 2
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    ACPI: Core revision 20100702
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
    CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node 0, Processors #1
    NMI watchdog enabled, takes one hw-pmu counter.
    Brought up 2 CPUs
    Total of 2 processors activated (10111.72 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Executed 1 blocks of module-level executable AML code
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: SSDT 00000000bdee4c10 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    ACPI: SSDT 00000000bdee2810 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    ACPI: SSDT 00000000bdee3d90 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
    ACPI: SSDT 00000000bdee1f90 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 8 1f
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
    DMAR: Forcing write-buffer flush capability
    DMAR: Disabling IOMMU for graphics on this chipset
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:1a.0: reg 20: [io 0xe0e0-0xe0ff]
    pci 0000:00:1a.1: reg 20: [io 0xe0c0-0xe0df]
    pci 0000:00:1a.2: reg 20: [io 0xe0a0-0xe0bf]
    pci 0000:00:1a.7: reg 10: [mem 0xd8d04c00-0xd8d04fff]
    pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.7: PME# disabled
    pci 0000:00:1b.0: reg 10: [mem 0xd8d00000-0xd8d03fff 64bit]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.2: PME# disabled
    pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.3: PME# disabled
    pci 0000:00:1d.0: reg 20: [io 0xe080-0xe09f]
    pci 0000:00:1d.1: reg 20: [io 0xe060-0xe07f]
    pci 0000:00:1d.2: reg 20: [io 0xe040-0xe05f]
    pci 0000:00:1d.7: reg 10: [mem 0xd8d04800-0xd8d04bff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.2: reg 10: [io 0xe130-0xe137]
    pci 0000:00:1f.2: reg 14: [io 0xe120-0xe123]
    pci 0000:00:1f.2: reg 18: [io 0xe110-0xe117]
    pci 0000:00:1f.2: reg 1c: [io 0xe100-0xe103]
    pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
    pci 0000:00:1f.2: reg 24: [mem 0xd8d04000-0xd8d047ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 10: [mem 0xd8d05000-0xd8d050ff 64bit]
    pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
    pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
    pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
    pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
    pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
    pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
    pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:02:00.0: reg 10: [mem 0xd7920000-0xd7923fff 64bit]
    pci 0000:02:00.0: reg 18: [io 0xc000-0xc0ff]
    pci 0000:02:00.0: reg 30: [mem 0xd7900000-0xd791ffff pref]
    pci 0000:02:00.0: supports D1 D2
    pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:00.0: PME# disabled
    pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
    pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:03:00.0: reg 10: [mem 0xd6500000-0xd6501fff 64bit]
    pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    pci 0000:03:00.0: PME# disabled
    pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
    pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:04:00.0: reg 10: [mem 0xd5100a00-0xd5100aff]
    pci 0000:04:00.0: supports D1 D2
    pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:04:00.0: PME# disabled
    pci 0000:04:00.1: reg 10: [mem 0xd5100900-0xd51009ff]
    pci 0000:04:00.1: supports D1 D2
    pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:04:00.1: PME# disabled
    pci 0000:04:00.3: reg 10: [mem 0xd5100000-0xd51007ff]
    pci 0000:04:00.3: supports D1 D2
    pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:04:00.3: PME# disabled
    pci 0000:04:00.4: reg 10: [mem 0xd5100800-0xd51008ff]
    pci 0000:04:00.4: supports D1 D2
    pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:04:00.4: PME# disabled
    pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
    pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
    pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
    pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
    pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
    pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 19 1f
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    HEST: Table is not found!
    vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    reserve RAM buffer: 000000000009bc00 - 000000000009ffff
    reserve RAM buffer: 00000000bdea7000 - 00000000bfffffff
    reserve RAM buffer: 00000000be000000 - 00000000bfffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
    system 00:05: [io 0x0680-0x069f] has been reserved
    system 00:05: [io 0x1000-0x100f] has been reserved
    system 00:05: [io 0x0800-0x0803] has been reserved
    system 00:05: [io 0x0400-0x047f] has been reserved
    system 00:05: [io 0x0500-0x053f] has been reserved
    system 00:05: [io 0x164e-0x164f] has been reserved
    system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    system 00:09: [mem 0xfed14000-0xfed17fff] has been reserved
    system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
    system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    system 00:09: [mem 0xfeb00000-0xfeb03fff] has been reserved
    system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    pci 0000:00:01.0: BAR 15: assigned [mem 0xd8e00000-0xd8ffffff 64bit pref]
    pci 0000:00:1c.0: BAR 15: assigned [mem 0xd9000000-0xd91fffff 64bit pref]
    pci 0000:00:1c.1: BAR 15: assigned [mem 0xd9200000-0xd93fffff 64bit pref]
    pci 0000:00:1c.2: BAR 15: assigned [mem 0xd9400000-0xd95fffff 64bit pref]
    pci 0000:00:1c.3: BAR 15: assigned [mem 0xd9600000-0xd97fffff 64bit pref]
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
    pci 0000:00:01.0: bridge window [mem 0xd8e00000-0xd8ffffff 64bit pref]
    pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
    pci 0000:00:1c.0: bridge window [mem 0xd9000000-0xd91fffff 64bit pref]
    pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
    pci 0000:00:1c.1: bridge window [mem 0xd9200000-0xd93fffff 64bit pref]
    pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
    pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
    pci 0000:00:1c.2: bridge window [mem 0xd9400000-0xd95fffff 64bit pref]
    pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
    pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
    pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
    pci 0000:00:1c.3: bridge window [mem 0xd9600000-0xd97fffff 64bit pref]
    pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
    pci 0000:00:1e.0: bridge window [io disabled]
    pci 0000:00:1e.0: bridge window [mem disabled]
    pci 0000:00:1e.0: bridge window [mem pref disabled]
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:1c.2: setting latency timer to 64
    pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:1c.3: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfebfffff]
    pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd30fffff]
    pci_bus 0000:01: resource 2 [mem 0xd8e00000-0xd8ffffff 64bit pref]
    pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    pci_bus 0000:02: resource 1 [mem 0xd7900000-0xd8cfffff]
    pci_bus 0000:02: resource 2 [mem 0xd9000000-0xd91fffff 64bit pref]
    pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
    pci_bus 0000:03: resource 1 [mem 0xd6500000-0xd78fffff]
    pci_bus 0000:03: resource 2 [mem 0xd9200000-0xd93fffff 64bit pref]
    pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
    pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd64fffff]
    pci_bus 0000:04: resource 2 [mem 0xd9400000-0xd95fffff 64bit pref]
    pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
    pci_bus 0000:05: resource 1 [mem 0xd3100000-0xd50fffff]
    pci_bus 0000:05: resource 2 [mem 0xd9600000-0xd97fffff 64bit pref]
    pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
    pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
    pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
    pci_bus 0000:0d: resource 13 [mem 0xc0000000-0xfebfffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    UDP hash table entries: 2048 (order: 4, 65536 bytes)
    UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    NET: Registered protocol family 1
    pci 0000:01:00.0: Boot video device
    PCI: CLS 64 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1756k freed
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
    software IO TLB at phys 0x5a00000 - 0x9a00000
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1290907981.066:1): initialized
    HugeTLB registered 2 MB page size, pre-allocated 0 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 7855
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    intel_idle: MWAIT substates: 0x3122220
    intel_idle: does not run on family 6 model 23
    ERST: Table is not found!
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    rtc_cmos 00:06: RTC can wake from S4
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Registering the dns_resolver key type
    PM: Resume from disk failed.
    registered taskstats version 1
    rtc_cmos 00:06: setting system clock to 2010-11-28 01:33:02 UTC (1290907982)
    Initalizing network drop monitor service
    Freeing unused kernel memory: 504k freed
    udev[38]: starting version 164
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
    ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04100 irq 40
    ata2: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04180 irq 40
    ata3: DUMMY
    ata4: DUMMY
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    ata2.00: ATAPI: Optiarc BD RW BD-5730S, 1.71, max UDMA/100
    ata2.00: configured for UDMA/100
    ata1.00: ATA-8: TOSHIBA MK3263GSX, FG020A, max UDMA/100
    ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    ata1.00: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3263GS FG02 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM Optiarc BD RW BD-5730S 1.71 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    cdrom: Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    EXT4-fs (sda5): INFO: recovery required on readonly filesystem
    EXT4-fs (sda5): write access will be enabled during recovery
    EXT4-fs (sda5): orphan cleanup on readonly fs
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226256
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226255
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226252
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226251
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226241
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226214
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226213
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226212
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226211
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226210
    EXT4-fs (sda5): 10 orphan inodes deleted
    EXT4-fs (sda5): recovery complete
    EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
    udev[958]: starting version 164
    fuse init (API version 7.15)
    iTCO_vendor_support: vendor-support=0
    input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
    ACPI: Lid Switch [LID0]
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    ACPI: Power Button [PWRB]
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [TZ00] (55 C)
    ACPI: Invalid active0 threshold
    ACPI: acpi_idle registered with cpuidle
    thermal LNXTHERM:02: registered as thermal_zone1
    ACPI: Thermal Zone [TZ01] (55 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Marking TSC unstable due to TSC halts in idle
    Switching to clocksource hpet
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    cfg80211: Calling CRDA to update world regulatory domain
    sky2: driver version 1.28
    sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    sky2 0000:02:00.0: setting latency timer to 64
    sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
    sky2 0000:02:00.0: irq 41 for MSI/MSI-X
    sky2 0000:02:00.0: eth0: addr 00:24:be:85:96:40
    input: PC Speaker as /devices/platform/pcspkr/input/input3
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ACPI: WMI: Mapper loaded
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    ehci_hcd 0000:00:1a.7: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: debug port 1
    ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd8d04c00
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8d04800
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1a.0: setting latency timer to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e0e0
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1a.1: setting latency timer to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e0c0
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1a.2: setting latency timer to 64
    uhci_hcd 0000:00:1a.2: UHCI Host Controller
    uhci_hcd 0000:00:1a.2:

    I tried another fresh install to see if me installing GNOME before messed up anything. The same problem persists, I made another fresh install. I only did a net install with Arch Linux core and haven't yet installed xorg or anything yet (havent even synced pacman yet). Weirdly nouveau is already loaded, this is the output of dmesg,
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010
    Command line: root=/dev/sda5 ro
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
    BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bdea7000 (usable)
    BIOS-e820: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
    BIOS-e820: 00000000bdecf000 - 00000000bdee0000 (reserved)
    BIOS-e820: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
    BIOS-e820: 00000000bdee1000 - 00000000bdf08000 (reserved)
    BIOS-e820: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
    BIOS-e820: 00000000bdf09000 - 00000000bdf0a000 (reserved)
    BIOS-e820: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
    BIOS-e820: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
    BIOS-e820: 00000000bdf1a000 - 00000000bdf39000 (reserved)
    BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
    BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    NX (Execute Disable) protection: active
    DMI 2.4 present.
    AMI BIOS detected: BIOS may corrupt low RAM, working around it.
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    No AGP bridge found
    last_pfn = 0x140000 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-CFFFF write-protect
    D0000-E7FFF write-through
    E8000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask F80000000 write-back
    1 base 080000000 mask FC0000000 write-back
    2 base 0BE000000 mask FFE000000 uncachable
    3 base 100000000 mask FC0000000 write-back
    4 disabled
    5 disabled
    6 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0xbe000 max_arch_pfn = 0x400000000
    Scanning 0 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009bc00 (usable)
    modified: 000000000009bc00 - 00000000000a0000 (reserved)
    modified: 00000000000e0000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 00000000bdea7000 (usable)
    modified: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
    modified: 00000000bdecf000 - 00000000bdee0000 (reserved)
    modified: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
    modified: 00000000bdee1000 - 00000000bdf08000 (reserved)
    modified: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
    modified: 00000000bdf09000 - 00000000bdf0a000 (reserved)
    modified: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
    modified: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
    modified: 00000000bdf1a000 - 00000000bdf39000 (reserved)
    modified: 00000000bdf39000 - 00000000be000000 (usable)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
    modified: 00000000ffe00000 - 0000000100000000 (reserved)
    modified: 0000000100000000 - 0000000140000000 (usable)
    initial memory mapped : 0 - 20000000
    found SMP MP-table at [ffff8800000fd690] fd690
    init_memory_mapping: 0000000000000000-00000000be000000
    0000000000 - 00be000000 page 2M
    kernel direct mapping tables up to be000000 @ 16000-1a000
    init_memory_mapping: 0000000100000000-0000000140000000
    0100000000 - 0140000000 page 2M
    kernel direct mapping tables up to 140000000 @ 18000-1e000
    RAMDISK: 37e39000 - 37ff0000
    ACPI: RSDP 00000000000f03b0 00024 (v02 Sony)
    ACPI: XSDT 00000000bdf12f10 0005C (v01 Sony VAIO 20090922 MSFT 00010013)
    ACPI: FACP 00000000bdf08a90 000F4 (v04 Sony VAIO 20090922 MSFT 00010013)
    ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
    ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40, using 32 (20100702/tbfadt-486)
    ACPI: DSDT 00000000bdf0a010 06831 (v01 Sony VAIO 20090922 INTL 20051117)
    ACPI: FACS 00000000bdf19e40 00040
    ACPI: APIC 00000000bdf11f10 0006C (v02 Sony VAIO 20090922 MSFT 00010013)
    ACPI: MCFG 00000000bdf18c90 0003C (v01 Sony VAIO 20090922 MSFT 00000097)
    ACPI: HPET 00000000bdf18c10 00038 (v01 Sony VAIO 20090922 MSFT 00010013)
    ACPI: SLIC 00000000bdf14c10 00176 (v01 Sony VAIO 20090922 Sony 01000000)
    ACPI: SSDT 00000000bdee0590 00505 (v01 Sony VAIO 20090922 INTL 20051117)
    ACPI: SSDT 00000000bdecbc10 002E4 (v01 Sony VAIO 20090922 INTL 20051117)
    ACPI: Local APIC address 0xfee00000
    [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00140000
    Movable zone start PFN for each node
    early_node_map[4] active PFN ranges
    0: 0x00000010 -> 0x0000009b
    0: 0x00000100 -> 0x000bdea7
    0: 0x000bdf39 -> 0x000be000
    0: 0x00100000 -> 0x00140000
    On node 0 totalpages: 1040121
    DMA zone: 56 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3923 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 759718 pages, LIFO batch:31
    Normal zone: 3584 pages used for memmap
    Normal zone: 258560 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a301 base: 0xfed00000
    SMP: Allowing 4 CPUs, 2 hotplug CPUs
    nr_irqs_gsi: 40
    early_res array is doubled to 64 at [19300 - 19aff]
    PM: Registered nosave memory: 000000000009b000 - 000000000009c000
    PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    PM: Registered nosave memory: 00000000bdea7000 - 00000000bdecf000
    PM: Registered nosave memory: 00000000bdecf000 - 00000000bdee0000
    PM: Registered nosave memory: 00000000bdee0000 - 00000000bdee1000
    PM: Registered nosave memory: 00000000bdee1000 - 00000000bdf08000
    PM: Registered nosave memory: 00000000bdf08000 - 00000000bdf09000
    PM: Registered nosave memory: 00000000bdf09000 - 00000000bdf0a000
    PM: Registered nosave memory: 00000000bdf0a000 - 00000000bdf14000
    PM: Registered nosave memory: 00000000bdf14000 - 00000000bdf1a000
    PM: Registered nosave memory: 00000000bdf1a000 - 00000000bdf39000
    PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
    PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
    PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
    PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
    PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
    Allocating PCI resources starting at be000000 (gap: be000000:22000000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u524288
    early_res array is doubled to 128 at [19b00 - 1aaff]
    pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
    pcpu-alloc: [0] 0 1 2 3
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1022201
    Kernel command line: root=/dev/sda5 ro
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Subtract (69 early reservations)
    #1 [0001000000 - 00017f99a8] TEXT DATA BSS
    #2 [0037e39000 - 0037ff0000] RAMDISK
    #3 [00017fa000 - 00017fa1f8] BRK
    #4 [00000fd6a0 - 0000100000] BIOS reserved
    #5 [00000fd690 - 00000fd6a0] MP-table mpf
    #6 [000009bc00 - 00000fd410] BIOS reserved
    #7 [00000fd624 - 00000fd690] BIOS reserved
    #8 [00000fd410 - 00000fd624] MP-table mpc
    #9 [0000010000 - 0000012000] TRAMPOLINE
    #10 [0000012000 - 0000016000] ACPI WAKEUP
    #11 [0000016000 - 0000018000] PGTABLE
    #12 [0000018000 - 0000019000] PGTABLE
    #13 [00017fa200 - 00017fb200] BOOTMEM
    #14 [0000019000 - 0000019300] BOOTMEM
    #15 [0001ffc000 - 0001ffd000] BOOTMEM
    #16 [0001ffd000 - 0001ffe000] BOOTMEM
    #17 [0002000000 - 0005800000] MEMMAP 0
    #18 [00017fb200 - 0001813200] BOOTMEM
    #19 [0001813200 - 000182b200] BOOTMEM
    #20 [000182b200 - 0001843200] BOOTMEM
    #21 [0001844000 - 0001845000] BOOTMEM
    #22 [00017f99c0 - 00017f9a01] BOOTMEM
    #23 [00017f9a40 - 00017f9a83] BOOTMEM
    #24 [00017f9ac0 - 00017f9ee8] BOOTMEM
    #25 [00017f9f00 - 00017f9f68] BOOTMEM
    #26 [00017f9f80 - 00017f9fe8] BOOTMEM
    #27 [0001843200 - 0001843268] BOOTMEM
    #28 [0001843280 - 00018432e8] BOOTMEM
    #29 [0001843300 - 0001843368] BOOTMEM
    #30 [0001843380 - 00018433e8] BOOTMEM
    #31 [0001843400 - 0001843468] BOOTMEM
    #32 [0001843480 - 00018434e8] BOOTMEM
    #33 [0001843500 - 0001843568] BOOTMEM
    #34 [0001843580 - 00018435e8] BOOTMEM
    #35 [0001843600 - 0001843668] BOOTMEM
    #36 [0001843680 - 00018436e8] BOOTMEM
    #37 [0001843700 - 0001843768] BOOTMEM
    #38 [0001843780 - 00018437e8] BOOTMEM
    #39 [0001843800 - 0001843868] BOOTMEM
    #40 [0001843880 - 00018438e8] BOOTMEM
    #41 [0001843900 - 0001843968] BOOTMEM
    #42 [0001843980 - 00018439e8] BOOTMEM
    #43 [0001843a00 - 0001843a20] BOOTMEM
    #44 [0001843a40 - 0001843a60] BOOTMEM
    #45 [0001843a80 - 0001843aa0] BOOTMEM
    #46 [0001843ac0 - 0001843ad2] BOOTMEM
    #47 [0001843b00 - 0001843b12] BOOTMEM
    #48 [0001a00000 - 0001a1c000] BOOTMEM
    #49 [0001a80000 - 0001a9c000] BOOTMEM
    #50 [0001b00000 - 0001b1c000] BOOTMEM
    #51 [0001b80000 - 0001b9c000] BOOTMEM
    #52 [0001843b40 - 0001843b48] BOOTMEM
    #53 [0001843b80 - 0001843b88] BOOTMEM
    #54 [0001843bc0 - 0001843bd0] BOOTMEM
    #55 [0001843c00 - 0001843c20] BOOTMEM
    #56 [0001843c40 - 0001843d70] BOOTMEM
    #57 [0001843d80 - 0001843dd0] BOOTMEM
    #58 [0001843e00 - 0001843e50] BOOTMEM
    #59 [0001845000 - 000184d000] BOOTMEM
    #60 [0001b9c000 - 0001f9c000] BOOTMEM
    #61 [0005800000 - 0005a00000] BOOTMEM
    #62 [0001843e80 - 0001843e88] BOOTMEM
    #63 [0001843ec0 - 0001843ec8] BOOTMEM
    #64 [000184d000 - 000184d240] BOOTMEM
    #65 [0005a00000 - 0009a00000] BOOTMEM
    #66 [000184d240 - 000186d240] BOOTMEM
    #67 [000186d240 - 00018ad240] BOOTMEM
    #68 [000001ab00 - 0000022b00] BOOTMEM
    Memory: 4020284k/5242880k available (3682k kernel code, 1082396k absent, 140200k reserved, 2083k data, 504k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
    NR_IRQS:2304
    Extended CMOS year: 2000
    Console: colour VGA+ 80x25
    console [tty0] enabled
    allocated 41943040 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    hpet clockevent registered
    Fast TSC calibration using PIT
    spurious 8259A interrupt: IRQ7.
    Detected 2527.164 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.92 BogoMIPS (lpj=8423880)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    TOMOYO Linux initialized
    AppArmor: AppArmor disabled by boot time parameter
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    Initializing cgroup subsys blkio
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version: 2
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    ACPI: Core revision 20100702
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
    CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node 0, Processors #1
    NMI watchdog enabled, takes one hw-pmu counter.
    Brought up 2 CPUs
    Total of 2 processors activated (10112.47 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Executed 1 blocks of module-level executable AML code
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: SSDT 00000000bdee4c10 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    ACPI: SSDT 00000000bdee2810 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    ACPI: SSDT 00000000bdee3d90 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
    ACPI: SSDT 00000000bdee1f90 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 8 1f
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
    DMAR: Forcing write-buffer flush capability
    DMAR: Disabling IOMMU for graphics on this chipset
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:1a.0: reg 20: [io 0xe0e0-0xe0ff]
    pci 0000:00:1a.1: reg 20: [io 0xe0c0-0xe0df]
    pci 0000:00:1a.2: reg 20: [io 0xe0a0-0xe0bf]
    pci 0000:00:1a.7: reg 10: [mem 0xd8d04c00-0xd8d04fff]
    pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.7: PME# disabled
    pci 0000:00:1b.0: reg 10: [mem 0xd8d00000-0xd8d03fff 64bit]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.2: PME# disabled
    pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.3: PME# disabled
    pci 0000:00:1d.0: reg 20: [io 0xe080-0xe09f]
    pci 0000:00:1d.1: reg 20: [io 0xe060-0xe07f]
    pci 0000:00:1d.2: reg 20: [io 0xe040-0xe05f]
    pci 0000:00:1d.7: reg 10: [mem 0xd8d04800-0xd8d04bff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.2: reg 10: [io 0xe130-0xe137]
    pci 0000:00:1f.2: reg 14: [io 0xe120-0xe123]
    pci 0000:00:1f.2: reg 18: [io 0xe110-0xe117]
    pci 0000:00:1f.2: reg 1c: [io 0xe100-0xe103]
    pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
    pci 0000:00:1f.2: reg 24: [mem 0xd8d04000-0xd8d047ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 10: [mem 0xd8d05000-0xd8d050ff 64bit]
    pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
    pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
    pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
    pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
    pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
    pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
    pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:02:00.0: reg 10: [mem 0xd7920000-0xd7923fff 64bit]
    pci 0000:02:00.0: reg 18: [io 0xc000-0xc0ff]
    pci 0000:02:00.0: reg 30: [mem 0xd7900000-0xd791ffff pref]
    pci 0000:02:00.0: supports D1 D2
    pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:00.0: PME# disabled
    pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
    pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:03:00.0: reg 10: [mem 0xd6500000-0xd6501fff 64bit]
    pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    pci 0000:03:00.0: PME# disabled
    pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
    pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:04:00.0: reg 10: [mem 0xd5100a00-0xd5100aff]
    pci 0000:04:00.0: supports D1 D2
    pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:04:00.0: PME# disabled
    pci 0000:04:00.1: reg 10: [mem 0xd5100900-0xd51009ff]
    pci 0000:04:00.1: supports D1 D2
    pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:04:00.1: PME# disabled
    pci 0000:04:00.3: reg 10: [mem 0xd5100000-0xd51007ff]
    pci 0000:04:00.3: supports D1 D2
    pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:04:00.3: PME# disabled
    pci 0000:04:00.4: reg 10: [mem 0xd5100800-0xd51008ff]
    pci 0000:04:00.4: supports D1 D2
    pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:04:00.4: PME# disabled
    pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
    pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
    pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
    pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
    pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
    pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 19 1f
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    HEST: Table is not found!
    vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    reserve RAM buffer: 000000000009bc00 - 000000000009ffff
    reserve RAM buffer: 00000000bdea7000 - 00000000bfffffff
    reserve RAM buffer: 00000000be000000 - 00000000bfffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
    system 00:05: [io 0x0680-0x069f] has been reserved
    system 00:05: [io 0x1000-0x100f] has been reserved
    system 00:05: [io 0x0800-0x0803] has been reserved
    system 00:05: [io 0x0400-0x047f] has been reserved
    system 00:05: [io 0x0500-0x053f] has been reserved
    system 00:05: [io 0x164e-0x164f] has been reserved
    system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    system 00:09: [mem 0xfed14000-0xfed17fff] has been reserved
    system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
    system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    system 00:09: [mem 0xfeb00000-0xfeb03fff] has been reserved
    system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    pci 0000:00:01.0: BAR 15: assigned [mem 0xd8e00000-0xd8ffffff 64bit pref]
    pci 0000:00:1c.0: BAR 15: assigned [mem 0xd9000000-0xd91fffff 64bit pref]
    pci 0000:00:1c.1: BAR 15: assigned [mem 0xd9200000-0xd93fffff 64bit pref]
    pci 0000:00:1c.2: BAR 15: assigned [mem 0xd9400000-0xd95fffff 64bit pref]
    pci 0000:00:1c.3: BAR 15: assigned [mem 0xd9600000-0xd97fffff 64bit pref]
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
    pci 0000:00:01.0: bridge window [mem 0xd8e00000-0xd8ffffff 64bit pref]
    pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
    pci 0000:00:1c.0: bridge window [mem 0xd9000000-0xd91fffff 64bit pref]
    pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
    pci 0000:00:1c.1: bridge window [mem 0xd9200000-0xd93fffff 64bit pref]
    pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
    pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
    pci 0000:00:1c.2: bridge window [mem 0xd9400000-0xd95fffff 64bit pref]
    pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
    pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
    pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
    pci 0000:00:1c.3: bridge window [mem 0xd9600000-0xd97fffff 64bit pref]
    pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
    pci 0000:00:1e.0: bridge window [io disabled]
    pci 0000:00:1e.0: bridge window [mem disabled]
    pci 0000:00:1e.0: bridge window [mem pref disabled]
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:1c.2: setting latency timer to 64
    pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:1c.3: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfebfffff]
    pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd30fffff]
    pci_bus 0000:01: resource 2 [mem 0xd8e00000-0xd8ffffff 64bit pref]
    pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    pci_bus 0000:02: resource 1 [mem 0xd7900000-0xd8cfffff]
    pci_bus 0000:02: resource 2 [mem 0xd9000000-0xd91fffff 64bit pref]
    pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
    pci_bus 0000:03: resource 1 [mem 0xd6500000-0xd78fffff]
    pci_bus 0000:03: resource 2 [mem 0xd9200000-0xd93fffff 64bit pref]
    pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
    pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd64fffff]
    pci_bus 0000:04: resource 2 [mem 0xd9400000-0xd95fffff 64bit pref]
    pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
    pci_bus 0000:05: resource 1 [mem 0xd3100000-0xd50fffff]
    pci_bus 0000:05: resource 2 [mem 0xd9600000-0xd97fffff 64bit pref]
    pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
    pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
    pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
    pci_bus 0000:0d: resource 13 [mem 0xc0000000-0xfebfffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    UDP hash table entries: 2048 (order: 4, 65536 bytes)
    UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    NET: Registered protocol family 1
    pci 0000:01:00.0: Boot video device
    PCI: CLS 64 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1756k freed
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
    software IO TLB at phys 0x5a00000 - 0x9a00000
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1290893788.056:1): initialized
    HugeTLB registered 2 MB page size, pre-allocated 0 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 7855
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    intel_idle: MWAIT substates: 0x3122220
    intel_idle: does not run on family 6 model 23
    ERST: Table is not found!
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    rtc_cmos 00:06: RTC can wake from S4
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Registering the dns_resolver key type
    PM: Resume from disk failed.
    registered taskstats version 1
    rtc_cmos 00:06: setting system clock to 2010-11-27 21:36:28 UTC (1290893788)
    Initalizing network drop monitor service
    Freeing unused kernel memory: 504k freed
    udev[38]: starting version 164
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
    ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04100 irq 40
    ata2: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04180 irq 40
    ata3: DUMMY
    ata4: DUMMY
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    ata2.00: ATAPI: Optiarc BD RW BD-5730S, 1.71, max UDMA/100
    ata2.00: configured for UDMA/100
    ata1.00: ATA-8: TOSHIBA MK3263GSX, FG020A, max UDMA/100
    ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    ata1.00: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3263GS FG02 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM Optiarc BD RW BD-5730S 1.71 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    cdrom: Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
    udev[949]: starting version 164
    iTCO_vendor_support: vendor-support=0
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    sony-laptop: Sony Notebook Control Driver v0.6.
    ACPI: WMI: Mapper loaded
    input: PC Speaker as /devices/platform/pcspkr/input/input1
    ACPI: AC Adapter [ADP1] (on-line)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [TZ00] (56 C)
    input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input2
    ACPI: Invalid active0 threshold
    ACPI: acpi_idle registered with cpuidle
    input: Sony Vaio Jogdial as /devices/virtual/input/input3
    thermal LNXTHERM:02: registered as thermal_zone1
    ACPI: Thermal Zone [TZ01] (56 C)
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Marking TSC unstable due to TSC halts in idle
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    Switching to clocksource hpet
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    cfg80211: Calling CRDA to update world regulatory domain
    sky2: driver version 1.28
    sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    sky2 0000:02:00.0: setting latency timer to 64
    sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
    sky2 0000:02:00.0: irq 41 for MSI/MSI-X
    sky2 0000:02:00.0: eth0: addr 00:24:be:85:96:40
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    ehci_hcd 0000:00:1a.7: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: debug port 1
    ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd8d04c00
    uhci_hcd: USB Universal Host Controller Interface driver
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8d04800
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1a.0: setting latency timer to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e0e0
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1a.1: setting latency timer to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e0c0
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1a.2: setting latency timer to 64
    uhci_hcd 0000:00:1a.2: UHCI Host Controller
    uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e0a0
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e080
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e060
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e040
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 2 ports detected
    [Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS
    input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/LNXVIDEO:00/input/input4
    ACPI: Video Device [NGFX] (multi-head: yes rom: no post: no)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
    ACPI: Lid Switch [LID0]
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
    ACPI: Power Button [PWRB]
    usb 1-2: new high speed USB device using ehci_hcd and address 2
    firewire_ohci 0000:04:00.3: PCI INT D -> GSI 17 (level, low) -> IRQ 17
    firewire_ohci 0000:04:00.3: setting latency timer to 64
    i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
    i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    ACPI: resource 0000:00:1f.3 [io 0xe000-0xe01f] conflicts with ACPI region SMI1 [io 0x0800-0xffff0803 64bit pref disabled]
    ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    firewire_ohci 0000:04:00.3: irq 42 for MSI/MSI-X
    firewire_ohci: Added fw-ohci device 0000:04:00.3, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
    usb 2-1: new high speed USB device using ehci_hcd and address 2
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    [drm] Initialized drm 1.1.0 20060810
    Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
    Initializing USB Mass Storage driver...
    scsi4 : usb-storage 2-1:1.0
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    iwlagn: Copyright(c) 2003-2010 Intel Corporation
    iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    iwlagn 0000:03:00.0: setting latency timer to 64
    iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
    iwlagn 0000:03:00.0: device EEPROM VER=0x11f, CALIB=0x4
    iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
    iwlagn 0000:03:00.0: irq 44 for MSI/MSI-X
    sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e822] (rev 0)
    sdhci-pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    sdhci-pci 0000:04:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
    sdhci-pci 0000:04:00.0: setting latency timer to 64
    Registered led device: mmc0::
    mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
    sdhci-pci 0000:04:00.4: SDHCI controller found [1180:e822] (rev 0)
    sdhci-pci 0000:04:00.4: PCI INT C -> GSI 16 (level, low) -> IRQ 16
    sdhci-pci 0000:04:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
    sdhci-pci 0000:04:00.4: setting latency timer to 64
    Registered led device: mmc1::
    mmc1: SDHCI controller on PCI [0000:04:00.4] using DMA
    firewire_core: created device fw0: GUID 080046030321aebd, S400
    hda_codec: ALC262: SKU not ready 0x411111f0
    hda_codec: ALC262: BIOS auto-probing.
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
    HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    hda_intel: Disable MSI for Nvidia chipset
    HDA Intel 0000:01:00.1: setting latency timer to 64
    usb 7-1: new full speed USB device using uhci_hcd and address 2
    iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device <unnamed> (05ca:18b5)
    input: UVC Camera (05ca:18b5) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    phy0: Selected rate control algorithm 'iwl-agn-rs'
    usbcore: registered new interface driver hiddev
    usb 8-1: new full speed USB device using uhci_hcd and address 2
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input10
    generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input11
    generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    Bluetooth: Core ver 2.15
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    scsi 4:0:0:0: Direct-Access CBM Flash Disk 5.00 PQ: 0 ANSI: 2
    sd 4:0:0:0: Attached scsi generic sg2 type 0
    sd 4:0:0:0: [sdb] 978944 512-byte logical blocks: (501 MB/478 MiB)
    sd 4:0:0:0: [sdb] Write Protect is off
    sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
    sd 4:0:0:0: [sdb] Assuming drive cache: write through
    sd 4:0:0:0: [sdb] Assuming drive cache: write through
    sdb: sdb1
    sd 4:0:0:0: [sdb] Assuming drive cache: write through
    sd 4:0:0:0: [sdb] Attached SCSI removable disk
    nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    nouveau 0000:01:00.0: setting latency timer to 64
    [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a5500a2)
    [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
    Bluetooth: Generic Bluetooth USB driver ver 0.6
    usbcore: registered new interface driver btusb
    [drm] nouveau 0000:01:00.0: ... appears to be valid
    [drm] nouveau 0000:01:00.0: BIT BIOS found
    [drm] nouveau 0000:01:00.0: Bios version 70.16.27.00
    [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
    [drm] nouveau 0000:01:00.0: TMDS table version 2.0
    [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
    [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 010003f3 00010036
    [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000000
    [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02422362 00020010
    [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000
    [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
    [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff
    [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
    [drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD52B
    [drm] nouveau 0000:01:00.0: 0xD84D: Condition still not met after 20ms, skipping following opcodes
    [drm] nouveau 0000:01:00.0: 0xD851: Condition still not met after 20ms, skipping following opcodes
    [drm] nouveau 0000:01:00.0: 0xDA0E: Condition still not met after 20ms, skipping following opcodes
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDA3B
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE7C5
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE803
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEA43
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEAA8
    [drm] nouveau 0000:01:00.0: 0xEAA8: Condition still not met after 20ms, skipping following opcodes
    [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
    [TTM] Zone kernel: Available graphics memory: 2011272 kiB.
    [TTM] Initializing pool allocator.
    [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
    [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
    [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
    [drm] nouveau 0000:01:00.0: allocated 1366x768 fb: 0x40230000, bo ffff88013bfac400
    Console: switching to colour frame buffer device 170x48
    fb0: nouveaufb frame buffer device
    drm: registered panic notifier
    [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
    EXT4-fs (sda5): re-mounted. Opts: (null)
    EXT4-fs (sda5): re-mounted. Opts: (null)
    Adding 2803304k swap on /dev/sda6. Priority:-1 extents:1 across:2803304k
    wlan0: authenticate with 94:44:52:78:c1:98 (try 1)
    wlan0: authenticated
    wlan0: associate with 94:44:52:78:c1:98 (try 1)
    wlan0: RX AssocResp from 94:44:52:78:c1:98 (capab=0x411 status=0 aid=1)
    wlan0: associated
    Intel AES-NI instructions are not detected.
    padlock: VIA PadLock not detected.
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010
    Command line: root=/dev/sda5 ro
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
    BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bdea7000 (usable)
    BIOS-e820: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
    BIOS-e820: 00000000bdecf000 - 00000000bdee0000 (reserved)
    BIOS-e820: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
    BIOS-e820: 00000000bdee1000 - 00000000bdf08000 (reserved)
    BIOS-e820: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
    BIOS-e820: 00000000bdf09000 - 00000000bdf0a000 (reserved)
    BIOS-e820: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
    BIOS-e820: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
    BIOS-e820: 00000000bdf1a000 - 00000000bdf39000 (reserved)
    BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
    BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    NX (Execute Disable) protection: active
    DMI 2.4 present.
    AMI BIOS detected: BIOS may corrupt low RAM, working around it.
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    No AGP bridge found
    last_pfn = 0x140000 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-CFFFF write-protect
    D0000-E7FFF write-through
    E8000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask F80000000 write-back
    1 base 080000000 mask FC0000000 write-back
    2 base 0BE000000 mask FFE000000 uncachable
    3 base 100000000 mask FC0000000 write-back
    4 disabled
    5 disabled
    6 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0xbe000 max_arch_pfn = 0x400000000
    Scanning 0 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009bc00 (usable)
    modified: 000000000009bc00 - 00000000000a0000 (reserved)
    modified: 00000000000e0000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 00000000bdea7000 (usable)
    modified: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
    modified: 00000000bdecf000 - 00000000bdee0000 (reserved)
    modified: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
    modified: 00000000bdee1000 - 00000000bdf08000 (reserved)
    modified: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
    modified: 00000000bdf09000 - 00000000bdf0a000 (reserved)
    modified: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
    modified: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
    modified: 00000000bdf1a000 - 00000000bdf39000 (reserved)
    modified: 00000000bdf39000 - 00000000be000000 (usable)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
    modified: 00000000ffe00000 - 0000000100000000 (reserved)
    modified: 0000000100000000 - 0000000140000000 (usable)
    initial memory mapped : 0 - 20000000
    found SMP MP-table at [ffff8800000fd690] fd690
    init_memory_mapping: 0000000000000000-00000000be000000
    0000000000 - 00be000000 page 2M
    kernel direct mapping tables up to be000000 @ 16000-1a000
    init_memory_mapping: 0000000100000000-0000000140000000
    0100000000 - 0140000000 page 2M
    kernel direct mapping tables up to 140000000 @ 18000-1e000
    RAMDISK: 37e39000 - 37ff0000
    ACPI: RSDP 00000000000f03b0 00024 (v02 Sony)
    ACPI: XSDT 00000000bdf12f10 0005C (v01 Sony VAIO 20090922 MSFT 00010013)
    ACPI: FACP 00000000bdf08a90 000F4 (v04 Sony VAIO 20090922 MSFT 00010013)
    ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
    ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40, using 32 (20100702/tbfadt-486)
    ACPI: DSDT 00000000bdf0a010 06831 (v01 Sony VAIO 20090922 INTL 20051117)
    ACPI: FACS 00000000bdf19e40 00040
    ACPI: APIC 00000000bdf11f10 0006C (v02 Sony VAIO 20090922 MSFT 00010013)
    ACPI: MCFG 00000000bdf18c90 0003C (v01 Sony VAIO 20090922 MSFT 00000097)
    ACPI: HPET 00000000bdf18c10 00038 (v01 Sony VAIO 20090922 MSFT 00010013)
    ACPI: SLIC 00000000bdf14c10 00176 (v01 Sony VAIO 20090922 Sony 01000000)
    ACPI: SSDT 00000000bdee0590 00505 (v01 Sony VAIO 20090922 INTL 20051117)
    ACPI: SSDT 00000000bdecbc10 002E4 (v01 Sony VAIO 20090922 INTL 20051117)
    ACPI: Local APIC address 0xfee00000
    [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00140000
    Movable zone start PFN for each node
    early_node_map[4] active PFN ranges
    0: 0x00000010 -> 0x0000009b
    0: 0x00000100 -> 0x000bdea7
    0: 0x000bdf39 -> 0x000be000
    0: 0x00100000 -> 0x00140000
    On node 0 totalpages: 1040121
    DMA zone: 56 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3923 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 759718 pages, LIFO batch:31
    Normal zone: 3584 pages used for memmap
    Normal zone: 258560 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a301 base: 0xfed00000
    SMP: Allowing 4 CPUs, 2 hotplug CPUs
    nr_irqs_gsi: 40
    early_res array is doubled to 64 at [19300 - 19aff]
    PM: Registered nosave memory: 000000000009b000 - 000000000009c000
    PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    PM: Registered nosave memory: 00000000bdea7000 - 00000000bdecf000
    PM: Registered nosave memory: 00000000bdecf000 - 00000000bdee0000
    PM: Registered nosave memory: 00000000bdee0000 - 00000000bdee1000
    PM: Registered nosave memory: 00000000bdee1000 - 00000000bdf08000
    PM: Registered nosave memory: 00000000bdf08000 - 00000000bdf09000
    PM: Registered nosave memory: 00000000bdf09000 - 00000000bdf0a000
    PM: Registered nosave memory: 00000000bdf0a000 - 00000000bdf14000
    PM: Registered nosave memory: 00000000bdf14000 - 00000000bdf1a000
    PM: Registered nosave memory: 00000000bdf1a000 - 00000000bdf39000
    PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
    PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
    PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
    PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
    PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
    Allocating PCI resources starting at be000000 (gap: be000000:22000000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u524288
    early_res array is doubled to 128 at [19b00 - 1aaff]
    pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
    pcpu-alloc: [0] 0 1 2 3
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1022201
    Kernel command line: root=/dev/sda5 ro
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Subtract (69 early reservations)
    #1 [0001000000 - 00017f99a8] TEXT DATA BSS
    #2 [0037e39000 - 0037ff0000] RAMDISK
    #3 [00017fa000 - 00017fa1f8] BRK
    #4 [00000fd6a0 - 0000100000] BIOS reserved
    #5 [00000fd690 - 00000fd6a0] MP-table mpf
    #6 [000009bc00 - 00000fd410] BIOS reserved
    #7 [00000fd624 - 00000fd690] BIOS reserved
    #8 [00000fd410 - 00000fd624] MP-table mpc
    #9 [0000010000 - 0000012000] TRAMPOLINE
    #10 [0000012000 - 0000016000] ACPI WAKEUP
    #11 [0000016000 - 0000018000] PGTABLE
    #12 [0000018000 - 0000019000] PGTABLE
    #13 [00017fa200 - 00017fb200] BOOTMEM
    #14 [0000019000 - 0000019300] BOOTMEM
    #15 [0001ffc000 - 0001ffd000] BOOTMEM
    #16 [0001ffd000 - 0001ffe000] BOOTMEM
    #17 [0002000000 - 0005800000] MEMMAP 0
    #18 [00017fb200 - 0001813200] BOOTMEM
    #19 [0001813200 - 000182b200] BOOTMEM
    #20 [000182b200 - 0001843200] BOOTMEM
    #21 [0001844000 - 0001845000] BOOTMEM
    #22 [00017f99c0 - 00017f9a01] BOOTMEM
    #23 [00017f9a40 - 00017f9a83] BOOTMEM
    #24 [00017f9ac0 - 00017f9ee8] BOOTMEM
    #25 [00017f9f00 - 00017f9f68] BOOTMEM
    #26 [00017f9f80 - 00017f9fe8] BOOTMEM
    #27 [0001843200 - 0001843268] BOOTMEM
    #28 [0001843280 - 00018432e8] BOOTMEM
    #29 [0001843300 - 0001843368] BOOTMEM
    #30 [0001843380 - 00018433e8] BOOTMEM
    #31 [0001843400 - 0001843468] BOOTMEM
    #32 [0001843480 - 00018434e8] BOOTMEM
    #33 [0001843500 - 0001843568] BOOTMEM
    #34 [0001843580 - 00018435e8] BOOTMEM
    #35 [0001843600 - 0001843668] BOOTMEM
    #36 [0001843680 - 00018436e8] BOOTMEM
    #37 [0001843700 - 0001843768] BOOTMEM
    #38 [0001843780 - 00018437e8] BOOTMEM
    #39 [0001843800 - 0001843868] BOOTMEM
    #40 [0001843880 - 00018438e8] BOOTMEM
    #41 [0001843900 - 0001843968] BOOTMEM
    #42 [0001843980 - 00018439e8] BOOTMEM
    #43 [0001843a00 - 0001843a20] BOOTMEM
    #44 [0001843a40 - 0001843a60] BOOTMEM
    #45 [0001843a80 - 0001843aa0] BOOTMEM
    #46 [0001843ac0 - 0001843ad2] BOOTMEM
    #47 [0001843b00 - 0001843b12] BOOTMEM
    #48 [0001a00000 - 0001a1c000] BOOTMEM
    #49 [0001a80000 - 0001a9c000] BOOTMEM
    #50 [0001b00000 - 0001b1c000] BOOTMEM
    #51 [0001b80000 - 0001b9c000] BOOTMEM
    #52 [0001843b40 - 0001843b48] BOOTMEM
    #53 [0001843b80 - 0001843b88] BOOTMEM
    #54 [0001843bc0 - 0001843bd0] BOOTMEM
    #55 [0001843c00 - 0001843c20] BOOTMEM
    #56 [0001843c40 - 0001843d70] BOOTMEM
    #57 [0001843d80 - 0001843dd0] BOOTMEM
    #58 [0001843e00 - 0001843e50] BOOTMEM
    #59 [0001845000 - 000184d000] BOOTMEM
    #60 [0001b9c000 - 0001f9c000] BOOTMEM
    #61 [0005800000 - 0005a00000] BOOTMEM
    #62 [0001843e80 - 0001843e88] BOOTMEM
    #63 [0001843ec0 - 0001843ec8] BOOTMEM
    #64 [000184d000 - 000184d240] BOOTMEM
    #65 [0005a00000 - 0009a00000] BOOTMEM
    #66 [000184d240 - 000186d240] BOOTMEM
    #67 [000186d240 - 00018ad240] BOOTMEM
    #68 [000001ab00 - 0000022b00] BOOTMEM
    Memory: 4020284k/5242880k available (3682k kernel code, 1082396k absent, 140200k reserved, 2083k data, 504k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
    NR_IRQS:2304
    Extended CMOS year: 2000
    Console: colour VGA+ 80x25
    console [tty0] enabled
    allocated 41943040 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    hpet clockevent registered
    Fast TSC calibration using PIT
    spurious 8259A interrupt: IRQ7.
    Detected 2527.035 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.65 BogoMIPS (lpj=8423450)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    TOMOYO Linux initialized
    AppArmor: AppArmor disabled by boot time parameter
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    Initializing cgroup subsys blkio
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version: 2
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    ACPI: Core revision 20100702
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
    CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node 0, Processors #1
    NMI watchdog enabled, takes one hw-pmu counter.
    Brought up 2 CPUs
    Total of 2 processors activated (10112.21 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Executed 1 blocks of module-level executable AML code
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: SSDT 00000000bdee4c10 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    ACPI: SSDT 00000000bdee2810 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    ACPI: SSDT 00000000bdee3d90 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
    ACPI: SSDT 00000000bdee1f90 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 8 1f
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
    DMAR: Forcing write-buffer flush capability
    DMAR: Disabling IOMMU for graphics on this chipset
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:1a.0: reg 20: [io 0xe0e0-0xe0ff]
    pci 0000:00:1a.1: reg 20: [io 0xe0c0-0xe0df]
    pci 0000:00:1a.2: reg 20: [io 0xe0a0-0xe0bf]
    pci 0000:00:1a.7: reg 10: [mem 0xd8d04c00-0xd8d04fff]
    pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.7: PME# disabled
    pci 0000:00:1b.0: reg 10: [mem 0xd8d00000-0xd8d03fff 64bit]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.2: PME# disabled
    pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.3: PME# disabled
    pci 0000:00:1d.0: reg 20: [io 0xe080-0xe09f]
    pci 0000:00:1d.1: reg 20: [io 0xe060-0xe07f]
    pci 0000:00:1d.2: reg 20: [io 0xe040-0xe05f]
    pci 0000:00:1d.7: reg 10: [mem 0xd8d04800-0xd8d04bff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.2: reg 10: [io 0xe130-0xe137]
    pci 0000:00:1f.2: reg 14: [io 0xe120-0xe123]
    pci 0000:00:1f.2: reg 18: [io 0xe110-0xe117]
    pci 0000:00:1f.2: reg 1c: [io 0xe100-0xe103]
    pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
    pci 0000:00:1f.2: reg 24: [mem 0xd8d04000-0xd8d047ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 10: [mem 0xd8d05000-0xd8d050ff 64bit]
    pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
    pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
    pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
    pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
    pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
    pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
    pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:02:00.0: reg 10: [mem 0xd7920000-0xd7923fff 64bit]
    pci 0000:02:00.0: reg 18: [io 0xc000-0xc0ff]
    pci 0000:02:00.0: reg 30: [mem 0xd7900000-0xd791

  • Trackpoint in Thinkpad X121e not always working

    Hi,
    my Lenovo Thinkpad X121e runs with ArchLinux x86_64 and all packages updated (no testing versions). All worked fine, but since a while i have the problem, that the trackpoint sometimes does not work. This occurs randomly at startup. Sometimes it works, sometimes not. If it works, it keeps working all the time the machine is running. If it is not running, after a reboot it will most likely work. This problem seems to occur randomly at about every tenth start of the machine. I remember that the trackpoint did work without problems in the past, but some update in the last few months has killed it. I currently cannot figure out, why this happens.
    I attached the dmesg and lsmod output for the working and non-working state of the trackpoint. If you need more info, please ask. I hope someone can help me :-)
    Thanks.
    Edit: Added also the Xorg.0.logs for working and non-working states.
    dmesg with a working trackpoint:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.3.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012
    [ 0.000000] Command line: root=/dev/sda3 ro
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
    [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c6efd000 (usable)
    [ 0.000000] BIOS-e820: 00000000c6efd000 - 00000000c730d000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c730d000 - 00000000c738d000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000c738d000 - 00000000c73ed000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000c73ed000 - 00000000c7e00000 (usable)
    [ 0.000000] BIOS-e820: 00000000c7e00000 - 00000000c8000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed81000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 000000011f000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: LENOVO 30515QG/30515QG, BIOS 8RET26WW (1.08 ) 06/20/2011
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x11f000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
    [ 0.000000] 3 base 0FFF90000 mask FFFFF0000 uncachable
    [ 0.000000] 4 base 0FED80000 mask FFFFFF000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] TOM2: 000000011f000000 aka 4592M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] last_pfn = 0xc7e00 max_arch_pfn = 0x400000000
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000c7e00000
    [ 0.000000] 0000000000 - 00c0000000 page 1G
    [ 0.000000] 00c0000000 - 00c7e00000 page 2M
    [ 0.000000] kernel direct mapping tables up to c7e00000 @ 1fffe000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000011f000000
    [ 0.000000] 0100000000 - 011f000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 11f000000 @ c7dfe000-c7e00000
    [ 0.000000] RAMDISK: 37d69000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v04 LENOVO)
    [ 0.000000] ACPI: XSDT 00000000c73ec120 00074 (v01 LENOVO TP-8R 00000003 PTEC 00000002)
    [ 0.000000] ACPI: FACP 00000000c73da000 000F4 (v04 LENOVO TP-8R 00001080 PTL 00000002)
    [ 0.000000] ACPI: DSDT 00000000c73dc000 0EAF9 (v01 LENOVO TP-8R 00001000 PTEC 00001080)
    [ 0.000000] ACPI: FACS 00000000c7378000 00040
    [ 0.000000] ACPI: SLIC 00000000c73eb000 00176 (v01 LENOVO TP-8R 00001080 PTEC 00000001)
    [ 0.000000] ACPI: HPET 00000000c73d9000 00038 (v01 LENOVO TP-8R 00001080 PTL 00000002)
    [ 0.000000] ACPI: APIC 00000000c73d8000 0005E (v02 LENOVO TP-8R 00001080 PTL 00000002)
    [ 0.000000] ACPI: MCFG 00000000c73d7000 0003C (v01 LENOVO TP-8R 00001080 PTL 00000002)
    [ 0.000000] ACPI: UEFI 00000000c73d6000 0003E (v01 LENOVO TP-8R 00001080 PTL 00000002)
    [ 0.000000] ACPI: UEFI 00000000c73d5000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
    [ 0.000000] ACPI: SSDT 00000000c73d4000 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
    [ 0.000000] ACPI: SSDT 00000000c73d2000 012FA (v02 AMD ALIB 00000001 MSFT 04000000)
    [ 0.000000] ACPI: UEFI 00000000c73d1000 0013E (v01 LENOVO TP-8R 00001080 PTL 00000002)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000011f000000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000011f000000
    [ 0.000000] NODE_DATA [000000011effb000 - 000000011effffff]
    [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ac00000-ffff88011e5fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0011f000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009d
    [ 0.000000] 0: 0x00000100 -> 0x000c6efd
    [ 0.000000] 0: 0x000c73ed -> 0x000c7e00
    [ 0.000000] 0: 0x00100000 -> 0x0011f000
    [ 0.000000] On node 0 totalpages: 944285
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3912 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 797008 pages, LIFO batch:31
    [ 0.000000] Normal zone: 1984 pages used for memmap
    [ 0.000000] Normal zone: 124992 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000c6efd000 - 00000000c730d000
    [ 0.000000] PM: Registered nosave memory: 00000000c730d000 - 00000000c738d000
    [ 0.000000] PM: Registered nosave memory: 00000000c738d000 - 00000000c73ed000
    [ 0.000000] PM: Registered nosave memory: 00000000c7e00000 - 00000000c8000000
    [ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed80000
    [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
    [ 0.000000] PM: Registered nosave memory: 00000000fed81000 - 00000000ffe00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:36c00000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011ec00000 s82176 r8192 d24320 u1048576
    [ 0.000000] pcpu-alloc: s82176 r8192 d24320 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 925912
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/sda3 ro
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3637724k/4702208k available (4496k kernel code, 925068k absent, 139416k reserved, 4326k data, 732k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:4352 nr_irqs:512 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 15204352 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1596.524 MHz processor.
    [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3194.09 BogoMIPS (lpj=5321746)
    [ 0.003347] pid_max: default: 32768 minimum: 301
    [ 0.003396] Security Framework initialized
    [ 0.003405] AppArmor: AppArmor disabled by boot time parameter
    [ 0.004113] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.007521] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.008760] Mount-cache hash table entries: 256
    [ 0.009042] Initializing cgroup subsys cpuacct
    [ 0.009050] Initializing cgroup subsys memory
    [ 0.009069] Initializing cgroup subsys devices
    [ 0.009073] Initializing cgroup subsys freezer
    [ 0.009077] Initializing cgroup subsys net_cls
    [ 0.009080] Initializing cgroup subsys blkio
    [ 0.009143] tseg: 00c7e00000
    [ 0.009147] CPU: Physical Processor ID: 0
    [ 0.009150] CPU: Processor Core ID: 0
    [ 0.009154] mce: CPU supports 6 MCE banks
    [ 0.011336] ACPI: Core revision 20120111
    [ 0.026703] ftrace: allocating 17489 entries in 69 pages
    [ 0.037262] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.071189] CPU0: AMD E-350 Processor stepping 00
    [ 0.073329] Performance Events: AMD PMU driver.
    [ 0.073329] ... version: 0
    [ 0.073329] ... bit width: 48
    [ 0.073329] ... generic registers: 4
    [ 0.073329] ... value mask: 0000ffffffffffff
    [ 0.073329] ... max period: 00007fffffffffff
    [ 0.073329] ... fixed-purpose events: 0
    [ 0.073329] ... event mask: 000000000000000f
    [ 0.090166] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.116773] Booting Node 0, Processors #1 Ok.
    [ 0.116781] smpboot cpu 1: start_ip = 98000
    [ 0.130046] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.136704] Brought up 2 CPUs
    [ 0.136716] Total of 2 processors activated (6388.18 BogoMIPS).
    [ 0.137266] devtmpfs: initialized
    [ 0.140921] PM: Registering ACPI NVS region at c730d000 (524288 bytes)
    [ 0.141584] NET: Registered protocol family 16
    [ 0.141951] ACPI: bus type pci registered
    [ 0.142141] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000)
    [ 0.142147] PCI: not using MMCONFIG
    [ 0.142150] PCI: Using configuration type 1 for base access
    [ 0.142153] PCI: Using configuration type 1 for extended access
    [ 0.143469] bio: create slab <bio-0> at 0
    [ 0.143469] ACPI: Added _OSI(Module Device)
    [ 0.143469] ACPI: Added _OSI(Processor Device)
    [ 0.143469] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.143469] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.146754] ACPI: EC: Look up EC in DSDT
    [ 0.157302] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.161305] ACPI: Interpreter enabled
    [ 0.161305] ACPI: (supports S0 S3 S4 S5)
    [ 0.161305] ACPI: Using IOAPIC for interrupt routing
    [ 0.161305] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000)
    [ 0.163624] PCI: MMCONFIG at [mem 0xf8000000-0xf9ffffff] reserved in ACPI motherboard resources
    [ 0.169819] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.175499] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.177428] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
    [ 0.177818] ACPI: No dock devices found.
    [ 0.177828] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.180145] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.181866] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.181872] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c1fff]
    [ 0.181877] pci_root PNP0A08:00: host bridge window [mem 0x000c2000-0x000c3fff]
    [ 0.181881] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c5fff]
    [ 0.181885] pci_root PNP0A08:00: host bridge window [mem 0x000c6000-0x000c7fff]
    [ 0.181890] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000c9fff]
    [ 0.181894] pci_root PNP0A08:00: host bridge window [mem 0x000ca000-0x000cbfff]
    [ 0.181898] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cdfff]
    [ 0.181902] pci_root PNP0A08:00: host bridge window [mem 0x000ce000-0x000cffff]
    [ 0.181906] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d1fff]
    [ 0.181910] pci_root PNP0A08:00: host bridge window [mem 0x000d2000-0x000d3fff]
    [ 0.181915] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff]
    [ 0.181919] pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff]
    [ 0.181923] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff]
    [ 0.181927] pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff]
    [ 0.181931] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff]
    [ 0.181935] pci_root PNP0A08:00: host bridge window [mem 0x000de000-0x000dffff]
    [ 0.181940] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e1fff]
    [ 0.181944] pci_root PNP0A08:00: host bridge window [mem 0x000e2000-0x000e3fff]
    [ 0.181948] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e5fff]
    [ 0.181952] pci_root PNP0A08:00: host bridge window [mem 0x000e6000-0x000e7fff]
    [ 0.181956] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000e9fff]
    [ 0.181960] pci_root PNP0A08:00: host bridge window [mem 0x000ea000-0x000ebfff]
    [ 0.181964] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000edfff]
    [ 0.181968] pci_root PNP0A08:00: host bridge window [mem 0x000ee000-0x000effff]
    [ 0.181973] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff]
    [ 0.181977] pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xffffffff]
    [ 0.181981] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.181985] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.182002] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000ce000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
    [ 0.182081] PCI host bridge to bus 0000:00
    [ 0.182085] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.182090] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c1fff]
    [ 0.182094] pci_bus 0000:00: root bus resource [mem 0x000c2000-0x000c3fff]
    [ 0.182098] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c5fff]
    [ 0.182102] pci_bus 0000:00: root bus resource [mem 0x000c6000-0x000c7fff]
    [ 0.182106] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000c9fff]
    [ 0.182110] pci_bus 0000:00: root bus resource [mem 0x000ca000-0x000cbfff]
    [ 0.182114] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cdfff]
    [ 0.182117] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d1fff]
    [ 0.182121] pci_bus 0000:00: root bus resource [mem 0x000d2000-0x000d3fff]
    [ 0.182125] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d5fff]
    [ 0.182129] pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff]
    [ 0.182133] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000d9fff]
    [ 0.182137] pci_bus 0000:00: root bus resource [mem 0x000da000-0x000dbfff]
    [ 0.182141] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff]
    [ 0.182144] pci_bus 0000:00: root bus resource [mem 0x000de000-0x000dffff]
    [ 0.182148] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e1fff]
    [ 0.182152] pci_bus 0000:00: root bus resource [mem 0x000e2000-0x000e3fff]
    [ 0.182156] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e5fff]
    [ 0.182160] pci_bus 0000:00: root bus resource [mem 0x000e6000-0x000e7fff]
    [ 0.182164] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000e9fff]
    [ 0.182168] pci_bus 0000:00: root bus resource [mem 0x000ea000-0x000ebfff]
    [ 0.182172] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000edfff]
    [ 0.182176] pci_bus 0000:00: root bus resource [mem 0x000ee000-0x000effff]
    [ 0.182180] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
    [ 0.182184] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffffffff]
    [ 0.182187] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.182191] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.182208] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
    [ 0.182268] pci 0000:00:01.0: [1002:9802] type 0 class 0x000300
    [ 0.182283] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
    [ 0.182294] pci 0000:00:01.0: reg 14: [io 0x4000-0x40ff]
    [ 0.182304] pci 0000:00:01.0: reg 18: [mem 0xf0300000-0xf033ffff]
    [ 0.182367] pci 0000:00:01.0: supports D1 D2
    [ 0.182392] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
    [ 0.182405] pci 0000:00:01.1: reg 10: [mem 0xf0344000-0xf0347fff]
    [ 0.182478] pci 0000:00:01.1: supports D1 D2
    [ 0.182559] pci 0000:00:05.0: [1022:1513] type 1 class 0x000604
    [ 0.182638] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    [ 0.182671] pci 0000:00:06.0: [1022:1514] type 1 class 0x000604
    [ 0.182749] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
    [ 0.182845] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
    [ 0.182872] pci 0000:00:11.0: reg 10: [io 0x4118-0x411f]
    [ 0.182886] pci 0000:00:11.0: reg 14: [io 0x4124-0x4127]
    [ 0.182900] pci 0000:00:11.0: reg 18: [io 0x4110-0x4117]
    [ 0.182915] pci 0000:00:11.0: reg 1c: [io 0x4120-0x4123]
    [ 0.182929] pci 0000:00:11.0: reg 20: [io 0x4100-0x410f]
    [ 0.182943] pci 0000:00:11.0: reg 24: [mem 0xf034a000-0xf034a3ff]
    [ 0.183027] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
    [ 0.183047] pci 0000:00:12.0: reg 10: [mem 0xf0349000-0xf0349fff]
    [ 0.183144] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
    [ 0.183171] pci 0000:00:12.2: reg 10: [mem 0xf034a500-0xf034a5ff]
    [ 0.183281] pci 0000:00:12.2: supports D1 D2
    [ 0.183285] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.183337] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
    [ 0.183357] pci 0000:00:13.0: reg 10: [mem 0xf0348000-0xf0348fff]
    [ 0.183455] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
    [ 0.183481] pci 0000:00:13.2: reg 10: [mem 0xf034a400-0xf034a4ff]
    [ 0.183591] pci 0000:00:13.2: supports D1 D2
    [ 0.183594] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.183629] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
    [ 0.183736] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
    [ 0.183767] pci 0000:00:14.2: reg 10: [mem 0xf0340000-0xf0343fff 64bit]
    [ 0.183855] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.183879] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
    [ 0.183982] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
    [ 0.184052] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
    [ 0.184102] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
    [ 0.184146] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
    [ 0.184192] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
    [ 0.184251] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
    [ 0.184295] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
    [ 0.184339] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
    [ 0.184383] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
    [ 0.184555] pci 0000:01:00.0: [10ec:8176] type 0 class 0x000280
    [ 0.184577] pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff]
    [ 0.184612] pci 0000:01:00.0: reg 18: [mem 0xf0200000-0xf0203fff 64bit]
    [ 0.184714] pci 0000:01:00.0: supports D1 D2
    [ 0.184718] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.190067] pci 0000:00:05.0: PCI bridge to [bus 01-01]
    [ 0.190089] pci 0000:00:05.0: bridge window [io 0x3000-0x3fff]
    [ 0.190101] pci 0000:00:05.0: bridge window [mem 0xf0200000-0xf02fffff]
    [ 0.190192] pci 0000:02:00.0: [1969:1083] type 0 class 0x000200
    [ 0.190224] pci 0000:02:00.0: reg 10: [mem 0xf0100000-0xf013ffff 64bit]
    [ 0.190239] pci 0000:02:00.0: reg 18: [io 0x2000-0x207f]
    [ 0.190356] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.196733] pci 0000:00:06.0: PCI bridge to [bus 02-02]
    [ 0.196755] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
    [ 0.196767] pci 0000:00:06.0: bridge window [mem 0xf0100000-0xf01fffff]
    [ 0.196860] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
    [ 0.196875] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.196881] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c1fff] (subtractive decode)
    [ 0.196885] pci 0000:00:14.4: bridge window [mem 0x000c2000-0x000c3fff] (subtractive decode)
    [ 0.196890] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c5fff] (subtractive decode)
    [ 0.196894] pci 0000:00:14.4: bridge window [mem 0x000c6000-0x000c7fff] (subtractive decode)
    [ 0.196899] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000c9fff] (subtractive decode)
    [ 0.196903] pci 0000:00:14.4: bridge window [mem 0x000ca000-0x000cbfff] (subtractive decode)
    [ 0.196921] pci 0000:00:14.4: bridge window [mem 0x000cc000-0x000cdfff] (subtractive decode)
    [ 0.196925] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode)
    [ 0.196930] pci 0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode)
    [ 0.196935] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
    [ 0.196939] pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
    [ 0.196944] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
    [ 0.196948] pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
    [ 0.196953] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
    [ 0.196957] pci 0000:00:14.4: bridge window [mem 0x000de000-0x000dffff] (subtractive decode)
    [ 0.196962] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e1fff] (subtractive decode)
    [ 0.196966] pci 0000:00:14.4: bridge window [mem 0x000e2000-0x000e3fff] (subtractive decode)
    [ 0.196971] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e5fff] (subtractive decode)
    [ 0.196975] pci 0000:00:14.4: bridge window [mem 0x000e6000-0x000e7fff] (subtractive decode)
    [ 0.196980] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000e9fff] (subtractive decode)
    [ 0.196984] pci 0000:00:14.4: bridge window [mem 0x000ea000-0x000ebfff] (subtractive decode)
    [ 0.196989] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000edfff] (subtractive decode)
    [ 0.196993] pci 0000:00:14.4: bridge window [mem 0x000ee000-0x000effff] (subtractive decode)
    [ 0.196998] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
    [ 0.197002] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xffffffff] (subtractive decode)
    [ 0.197007] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.197011] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.197091] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.197382] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
    [ 0.197462] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
    [ 0.197622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    [ 0.197990] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.198396] pci0000:00: ACPI _OSC control (0x1d) granted
    [ 0.207341] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0
    [ 0.207552] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0
    [ 0.207715] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0
    [ 0.207830] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0
    [ 0.207926] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
    [ 0.208048] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0
    [ 0.208177] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0
    [ 0.208300] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0
    [ 0.208426] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.208426] vgaarb: loaded
    [ 0.208426] vgaarb: bridge control possible 0000:00:01.0
    [ 0.208426] PCI: Using ACPI for IRQ routing
    [ 0.210067] PCI: pci_cache_line_size set to 64 bytes
    [ 0.210205] reserve RAM buffer: 000000000009d800 - 000000000009ffff
    [ 0.210210] reserve RAM buffer: 00000000c6efd000 - 00000000c7ffffff
    [ 0.210215] reserve RAM buffer: 00000000c7e00000 - 00000000c7ffffff
    [ 0.210219] reserve RAM buffer: 000000011f000000 - 000000011fffffff
    [ 0.210416] NetLabel: Initializing
    [ 0.210420] NetLabel: domain hash size = 128
    [ 0.210422] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.210446] NetLabel: unlabeled traffic allowed by default
    [ 0.210504] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.210511] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 0.212540] Switching to clocksource hpet
    [ 0.225756] pnp: PnP ACPI init
    [ 0.225801] ACPI: bus type pnp registered
    [ 0.226870] pnp 00:00: [bus 00-ff]
    [ 0.226876] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.226881] pnp 00:00: [mem 0x000c0000-0x000c1fff window]
    [ 0.226885] pnp 00:00: [mem 0x000c2000-0x000c3fff window]
    [ 0.226889] pnp 00:00: [mem 0x000c4000-0x000c5fff window]
    [ 0.226893] pnp 00:00: [mem 0x000c6000-0x000c7fff window]
    [ 0.226897] pnp 00:00: [mem 0x000c8000-0x000c9fff window]
    [ 0.226901] pnp 00:00: [mem 0x000ca000-0x000cbfff window]
    [ 0.226904] pnp 00:00: [mem 0x000cc000-0x000cdfff window]
    [ 0.226908] pnp 00:00: [mem 0x000ce000-0x000cffff window]
    [ 0.226912] pnp 00:00: [mem 0x000d0000-0x000d1fff window]
    [ 0.226920] pnp 00:00: [mem 0x000d2000-0x000d3fff window]
    [ 0.226924] pnp 00:00: [mem 0x000d4000-0x000d5fff window]
    [ 0.226927] pnp 00:00: [mem 0x000d6000-0x000d7fff window]
    [ 0.226931] pnp 00:00: [mem 0x000d8000-0x000d9fff window]
    [ 0.226935] pnp 00:00: [mem 0x000da000-0x000dbfff window]
    [ 0.226938] pnp 00:00: [mem 0x000dc000-0x000ddfff window]
    [ 0.226942] pnp 00:00: [mem 0x000de000-0x000dffff window]
    [ 0.226946] pnp 00:00: [mem 0x000e0000-0x000e1fff window]
    [ 0.226950] pnp 00:00: [mem 0x000e2000-0x000e3fff window]
    [ 0.226953] pnp 00:00: [mem 0x000e4000-0x000e5fff window]
    [ 0.226957] pnp 00:00: [mem 0x000e6000-0x000e7fff window]
    [ 0.226961] pnp 00:00: [mem 0x000e8000-0x000e9fff window]
    [ 0.226964] pnp 00:00: [mem 0x000ea000-0x000ebfff window]
    [ 0.226968] pnp 00:00: [mem 0x000ec000-0x000edfff window]
    [ 0.226972] pnp 00:00: [mem 0x000ee000-0x000effff window]
    [ 0.226976] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
    [ 0.226979] pnp 00:00: [mem 0xf8000000-0xffffffff window]
    [ 0.226984] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.226987] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.226991] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.227102] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.227189] pnp 00:01: [io 0x0f50-0x0f51]
    [ 0.227194] pnp 00:01: [mem 0xfec00000-0xfec00fff]
    [ 0.227198] pnp 00:01: [mem 0xfee00000-0xfee00fff]
    [ 0.227201] pnp 00:01: [mem 0xf8000000-0xf9ffffff]
    [ 0.227291] system 00:01: [io 0x0f50-0x0f51] has been reserved
    [ 0.227298] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.227303] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.227308] system 00:01: [mem 0xf8000000-0xf9ffffff] has been reserved
    [ 0.227314] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.228056] pnp 00:02: [io 0x0000-0x001f]
    [ 0.228060] pnp 00:02: [io 0x0081-0x008f]
    [ 0.228063] pnp 00:02: [io 0x00c0-0x00de]
    [ 0.228066] pnp 00:02: [io 0x040b]
    [ 0.228069] pnp 00:02: [io 0x04d6]
    [ 0.228073] pnp 00:02: [dma 4]
    [ 0.228138] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.228155] pnp 00:03: [io 0x00f0-0x00fe]
    [ 0.228221] pnp 00:03: [irq 13]
    [ 0.228286] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.228306] pnp 00:04: [io 0x0070-0x0071]
    [ 0.228361] pnp 00:04: [irq 8]
    [ 0.228418] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.228434] pnp 00:05: [io 0x0061]
    [ 0.228496] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.228516] pnp 00:06: [io 0x0060]
    [ 0.228519] pnp 00:06: [io 0x0064]
    [ 0.228528] pnp 00:06: [irq 1]
    [ 0.228598] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.228686] pnp 00:07: [irq 12]
    [ 0.228746] pnp 00:07: Plug and Play ACPI device, IDs LEN0026 PNP0f13 (active)
    [ 0.228772] pnp 00:08: [io 0x0022-0x0023]
    [ 0.228775] pnp 00:08: [io 0x002e-0x002f]
    [ 0.228779] pnp 00:08: [io 0x0072-0x0073]
    [ 0.228785] pnp 00:08: [io 0x0080]
    [ 0.228789] pnp 00:08: [io 0x0092]
    [ 0.228792] pnp 00:08: [io 0x00b0-0x00b1]
    [ 0.228795] pnp 00:08: [io 0x00b2]
    [ 0.228798] pnp 00:08: [io 0x00b8]
    [ 0.228801] pnp 00:08: [io 0x00bc]
    [ 0.228804] pnp 00:08: [io 0x00f0]
    [ 0.228807] pnp 00:08: [io 0x04d0-0x04d1]
    [ 0.228810] pnp 00:08: [io 0x0530-0x0537]
    [ 0.228813] pnp 00:08: [io 0x0800-0x0827]
    [ 0.228817] pnp 00:08: [io 0x0830]
    [ 0.228820] pnp 00:08: [io 0x0840-0x0847]
    [ 0.228823] pnp 00:08: [io 0x0b00-0x0b1f]
    [ 0.228826] pnp 00:08: [io 0x0b20-0x0b3f]
    [ 0.228829] pnp 00:08: [io 0x0c00-0x0c01]
    [ 0.228832] pnp 00:08: [io 0x0c14]
    [ 0.228835] pnp 00:08: [io 0x0c50-0x0c52]
    [ 0.228839] pnp 00:08: [io 0x0cd0-0x0cd1]
    [ 0.228842] pnp 00:08: [io 0x0cd2-0x0cd3]
    [ 0.228845] pnp 00:08: [io 0x0cd4-0x0cd5]
    [ 0.228848] pnp 00:08: [io 0x0cd6-0x0cd7]
    [ 0.228851] pnp 00:08: [io 0x0cd8-0x0cdf]
    [ 0.228854] pnp 00:08: [io 0x0cf9]
    [ 0.228858] pnp 00:08: [io 0x8100-0x81ff window]
    [ 0.228862] pnp 00:08: [io 0x8200-0x82ff window]
    [ 0.228977] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 0.228982] system 00:08: [io 0x0530-0x0537] has been reserved
    [ 0.228987] system 00:08: [io 0x0800-0x0827] has been reserved
    [ 0.228991] system 00:08: [io 0x0830] has been reserved
    [ 0.228996] system 00:08: [io 0x0840-0x0847] has been reserved
    [ 0.229000] system 00:08: [io 0x0b00-0x0b1f] has been reserved
    [ 0.229005] system 00:08: [io 0x0b20-0x0b3f] has been reserved
    [ 0.229009] system 00:08: [io 0x0c00-0x0c01] has been reserved
    [ 0.229014] system 00:08: [io 0x0c14] has been reserved
    [ 0.229018] system 00:08: [io 0x0c50-0x0c52] has been reserved
    [ 0.229023] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.229027] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.229032] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
    [ 0.229036] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
    [ 0.229041] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
    [ 0.229045] system 00:08: [io 0x0cf9] could not be reserved
    [ 0.229050] system 00:08: [io 0x8100-0x81ff window] has been reserved
    [ 0.229055] system 00:08: [io 0x8200-0x82ff window] has been reserved
    [ 0.229061] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.229217] pnp 00:09: [mem 0x000e0000-0x000fffff]
    [ 0.229221] pnp 00:09: [mem 0xffe00000-0xffffffff]
    [ 0.229225] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.229229] pnp 00:09: [mem 0xfec10000-0xfec1001f]
    [ 0.229233] pnp 00:09: [mem 0xfed00000-0xfed003ff]
    [ 0.229236] pnp 00:09: [mem 0xfed61000-0xfed613ff]
    [ 0.229240] pnp 00:09: [mem 0xfed80000-0xfed80fff]
    [ 0.229272] pnp 00:09: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xf8000000-0xf9ffffff]; adding more reservations
    [ 0.229345] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.229351] system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
    [ 0.229356] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
    [ 0.229360] system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved
    [ 0.229365] system 00:09: [mem 0xfed61000-0xfed613ff] has been reserved
    [ 0.229370] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
    [ 0.229376] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.229807] pnp: PnP ACPI: found 10 devices
    [ 0.229815] ACPI: ACPI bus type pnp unregistered
    [ 0.242341] PCI: max bus depth: 1 pci_try_num: 2
    [ 0.242430] pci 0000:00:05.0: PCI bridge to [bus 01-01]
    [ 0.242437] pci 0000:00:05.0: bridge window [io 0x3000-0x3fff]
    [ 0.242445] pci 0000:00:05.0: bridge window [mem 0xf0200000-0xf02fffff]
    [ 0.242455] pci 0000:00:06.0: PCI bridge to [bus 02-02]
    [ 0.242461] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
    [ 0.242467] pci 0000:00:06.0: bridge window [mem 0xf0100000-0xf01fffff]
    [ 0.242477] pci 0000:00:14.4: PCI bridge to [bus 04-04]
    [ 0.242564] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
    [ 0.242569] pci_bus 0000:00: resource 5 [mem 0x000c0000-0x000c1fff]
    [ 0.242573] pci_bus 0000:00: resource 6 [mem 0x000c2000-0x000c3fff]
    [ 0.242578] pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000c5fff]
    [ 0.242582] pci_bus 0000:00: resource 8 [mem 0x000c6000-0x000c7fff]
    [ 0.242586] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000c9fff]
    [ 0.242590] pci_bus 0000:00: resource 10 [mem 0x000ca000-0x000cbfff]
    [ 0.242594] pci_bus 0000:00: resource 11 [mem 0x000cc000-0x000cdfff]
    [ 0.242598] pci_bus 0000:00: resource 12 [mem 0x000d0000-0x000d1fff]
    [ 0.242602] pci_bus 0000:00: resource 13 [mem 0x000d2000-0x000d3fff]
    [ 0.242606] pci_bus 0000:00: resource 14 [mem 0x000d4000-0x000d5fff]
    [ 0.242610] pci_bus 0000:00: resource 15 [mem 0x000d6000-0x000d7fff]
    [ 0.242614] pci_bus 0000:00: resource 16 [mem 0x000d8000-0x000d9fff]
    [ 0.242618] pci_bus 0000:00: resource 17 [mem 0x000da000-0x000dbfff]
    [ 0.242622] pci_bus 0000:00: resource 18 [mem 0x000dc000-0x000ddfff]
    [ 0.242626] pci_bus 0000:00: resource 19 [mem 0x000de000-0x000dffff]
    [ 0.242629] pci_bus 0000:00: resource 20 [mem 0x000e0000-0x000e1fff]
    [ 0.242633] pci_bus 0000:00: resource 21 [mem 0x000e2000-0x000e3fff]
    [ 0.242637] pci_bus 0000:00: resource 22 [mem 0x000e4000-0x000e5fff]
    [ 0.242641] pci_bus 0000:00: resource 23 [mem 0x000e6000-0x000e7fff]
    [ 0.242645] pci_bus 0000:00: resource 24 [mem 0x000e8000-0x000e9fff]
    [ 0.242649] pci_bus 0000:00: resource 25 [mem 0x000ea000-0x000ebfff]
    [ 0.242653] pci_bus 0000:00: resource 26 [mem 0x000ec000-0x000edfff]
    [ 0.242657] pci_bus 0000:00: resource 27 [mem 0x000ee000-0x000effff]
    [ 0.242661] pci_bus 0000:00: resource 28 [mem 0xe0000000-0xf7ffffff]
    [ 0.242665] pci_bus 0000:00: resource 29 [mem 0xf8000000-0xffffffff]
    [ 0.242669] pci_bus 0000:00: resource 30 [io 0x0000-0x0cf7]
    [ 0.242673] pci_bus 0000:00: resource 31 [io 0x0d00-0xffff]
    [ 0.242677] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.242681] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
    [ 0.242685] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.242689] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
    [ 0.242694] pci_bus 0000:04: resource 4 [mem 0x000a0000-0x000bffff]
    [ 0.242698] pci_bus 0000:04: resource 5 [mem 0x000c0000-0x000c1fff]
    [ 0.242702] pci_bus 0000:04: resource 6 [mem 0x000c2000-0x000c3fff]
    [ 0.242706] pci_bus 0000:04: resource 7 [mem 0x000c4000-0x000c5fff]
    [ 0.242711] pci_bus 0000:04: resource 8 [mem 0x000c6000-0x000c7fff]
    [ 0.242715] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000c9fff]
    [ 0.242719] pci_bus 0000:04: resource 10 [mem 0x000ca000-0x000cbfff]
    [ 0.242723] pci_bus 0000:04: resource 11 [mem 0x000cc000-0x000cdfff]
    [ 0.242727] pci_bus 0000:04: resource 12 [mem 0x000d0000-0x000d1fff]
    [ 0.242731] pci_bus 0000:04: resource 13 [mem 0x000d2000-0x000d3fff]
    [ 0.242735] pci_bus 0000:04: resource 14 [mem 0x000d4000-0x000d5fff]
    [ 0.242739] pci_bus 0000:04: resource 15 [mem 0x000d6000-0x000d7fff]
    [ 0.242743] pci_bus 0000:04: resource 16 [mem 0x000d8000-0x000d9fff]
    [ 0.242746] pci_bus 0000:04: resource 17 [mem 0x000da000-0x000dbfff]
    [ 0.242750] pci_bus 0000:04: resource 18 [mem 0x000dc000-0x000ddfff]
    [ 0.242755] pci_bus 0000:04: resource 19 [mem 0x000de000-0x000dffff]
    [ 0.242759] pci_bus 0000:04: resource 20 [mem 0x000e0000-0x000e1fff]
    [ 0.242763] pci_bus 0000:04: resource 21 [mem 0x000e2000-0x000e3fff]
    [ 0.242767] pci_bus 0000:04: resource 22 [mem 0x000e4000-0x000e5fff]
    [ 0.242771] pci_bus 0000:04: resource 23 [mem 0x000e6000-0x000e7fff]
    [ 0.242775] pci_bus 0000:04: resource 24 [mem 0x000e8000-0x000e9fff]
    [ 0.242779] pci_bus 0000:04: resource 25 [mem 0x000ea000-0x000ebfff]
    [ 0.242783] pci_bus 0000:04: resource 26 [mem 0x000ec000-0x000edfff]
    [ 0.242787] pci_bus 0000:04: resource 27 [mem 0x000ee000-0x000effff]
    [ 0.242791] pci_bus 0000:04: resource 28 [mem 0xe0000000-0xf7ffffff]
    [ 0.242795] pci_bus 0000:04: resource 29 [mem 0xf8000000-0xffffffff]
    [ 0.242799] pci_bus 0000:04: resource 30 [io 0x0000-0x0cf7]
    [ 0.242803] pci_bus 0000:04: resource 31 [io 0x0d00-0xffff]
    [ 0.242879] NET: Registered protocol family 2
    [ 0.243147] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.245284] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.250181] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.250766] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.250771] TCP reno registered
    [ 0.250804] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.250858] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.251058] NET: Registered protocol family 1
    [ 0.251088] pci 0000:00:01.0: Boot video device
    [ 0.383864] PCI: CLS 32 bytes, default 64
    [ 0.383965] Unpacking initramfs...
    [ 0.478532] Freeing initrd memory: 2588k freed
    [ 0.480190] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.480198] Placing 64MB software IO TLB between ffff8800c2efd000 - ffff8800c6efd000
    [ 0.480203] software IO TLB at phys 0xc2efd000 - 0xc6efd000
    [ 0.480963] perf: AMD IBS detected (0x000000ff)
    [ 0.481379] audit: initializing netlink socket (disabled)
    [ 0.481404] type=2000 audit(1339340302.479:1): initialized
    [ 0.482558] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.487036] VFS: Disk quotas dquot_6.5.2
    [ 0.487152] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.487326] msgmni has been set to 7109
    [ 0.487931] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.488040] io scheduler noop registered
    [ 0.488044] io scheduler deadline registered
    [ 0.488154] io scheduler cfq registered (default)
    [ 0.488395] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
    [ 0.488550] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
    [ 0.488682] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
    [ 0.488687] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 0.488694] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
    [ 0.488719] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
    [ 0.488723] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.488729] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
    [ 0.488942] GHES: HEST is not enabled!
    [ 0.489246] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.490367] Linux agpgart interface v0.103
    [ 0.490508] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    [ 0.492943] i8042: Detected active multiplexing controller, rev 1.1
    [ 0.496025] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.496088] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 0.496136] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 0.496180] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 0.496225] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 0.496472] mousedev: PS/2 mouse device common for all mice
    [ 0.496667] rtc_cmos 00:04: RTC can wake from S4
    [ 0.497028] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 0.497119] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
    [ 0.497144] cpuidle: using governor ladder
    [ 0.497148] cpuidle: using governor menu
    [ 0.497476] TCP cubic registered
    [ 0.497700] NET: Registered protocol family 10
    [ 0.498445] NET: Registered protocol family 17
    [ 0.498453] Registering the dns_resolver key type
    [ 0.499372] PM: Hibernation image not present or could not be loaded.
    [ 0.499393] registered taskstats version 1
    [ 0.500327] rtc_cmos 00:04: setting system clock to 2012-06-10 14:58:23 UTC (1339340303)
    [ 0.500417] Initializing network drop monitor service
    [ 0.502828] Freeing unused kernel memory: 732k freed
    [ 0.503217] Write protecting the kernel read-only data: 8192k
    [ 0.513112] Freeing unused kernel memory: 1628k freed
    [ 0.518185] Freeing unused kernel memory: 656k freed
    [ 0.536071] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.539774] udevd[37]: starting version 184
    [ 0.613296] usbcore: registered new interface driver usbfs
    [ 0.613442] usbcore: registered new interface driver hub
    [ 0.619684] usbcore: registered new device driver usb
    [ 0.620711] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.621584] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [ 0.621640] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    [ 0.621702] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.621746] QUIRK: Enable AMD PLL fix
    [ 0.621810] ehci_hcd 0000:00:12.2: debug port 1
    [ 0.621850] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf034a500
    [ 0.630117] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 0.630310] SCSI subsystem initialized
    [ 0.636369] hub 1-0:1.0: USB hub found
    [ 0.636381] hub 1-0:1.0: 5 ports detected
    [ 0.636783] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [ 0.636805] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    [ 0.636818] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.636859] ehci_hcd 0000:00:13.2: debug port 1
    [ 0.636884] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf034a400
    [ 0.637204] libata version 3.00 loaded.
    [ 0.640574] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.646781] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 0.647066] hub 2-0:1.0: USB hub found
    [ 0.647076] hub 2-0:1.0: 5 ports detected
    [ 0.647328] ahci 0000:00:11.0: version 3.0
    [ 0.647600] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
    [ 0.647608] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
    [ 0.648432] scsi0 : ahci
    [ 0.648735] ata1: SATA max UDMA/133 abar m1024@0xf034a000 port 0xf034a100 irq 19
    [ 0.648890] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [ 0.648918] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
    [ 0.649020] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0349000
    [ 0.704676] hub 3-0:1.0: USB hub found
    [ 0.704691] hub 3-0:1.0: 5 ports detected
    [ 0.706337] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 0.706357] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
    [ 0.706392] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0348000
    [ 0.761543] hub 4-0:1.0: USB hub found
    [ 0.761558] hub 4-0:1.0: 5 ports detected
    [ 1.137007] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.138642] ata1.00: ATA-8: HITACHI HTS723232A7A364, EC2ZB70B, max UDMA/100
    [ 1.138651] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.140067] ata1.00: configured for UDMA/100
    [ 1.140658] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72323 EC2Z PQ: 0 ANSI: 5
    [ 1.144742] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 1.144844] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.144850] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.144893] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.185183] sda: sda1 sda2 sda3 sda4
    [ 1.187123] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.483438] Refined TSC clocksource calibration: 1596.599 MHz.
    [ 1.483459] Switching to clocksource tsc
    [ 1.820777] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.075750] udevd[314]: starting version 185
    [ 4.538235] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.618824] Using firmware rtlwifi/rtl8192cfw.bin
    [ 4.664522] ACPI: acpi_idle registered with cpuidle
    [ 4.677193] powernow-k8: Found 1 AMD E-350 Processor (2 cpu cores) (version 2.20.00)
    [ 4.677322] powernow-k8: 0 : pstate 0 (1600 MHz)
    [ 4.677326] powernow-k8: 1 : pstate 1 (1280 MHz)
    [ 4.677329] powernow-k8: 2 : pstate 2 (800 MHz)
    [ 5.014794] ACPI: AC Adapter [ACAD] (on-line)
    [ 5.015426] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 5.015836] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 5.016050] ACPI: Power Button [PWRB]
    [ 5.016149] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 5.016283] ACPI: Sleep Button [SLPB]
    [ 5.016405] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    [ 5.033809] ACPI: Lid Switch [LID]
    [ 5.033969] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 5.034129] ACPI: Power Button [PWRF]
    [ 5.047632] acpi device:34: registered as cooling_device2
    [ 5.051373] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5
    [ 5.051525] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
    [ 5.076994] ACPI: Battery Slot [BAT1] (battery present)
    [ 5.131780] thermal LNXTHERM:00: registered as thermal_zone0
    [ 5.131788] ACPI: Thermal Zone [THZ0] (43 C)
    [ 5.142726] wmi: Mapper loaded
    [ 5.157792] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 5.227665] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
    [ 5.227836] SP5100 TCO timer: mmio address 0xb80830 already in use
    [ 5.363443] Non-volatile memory driver v1.3
    [ 5.428563] atl1c 0000:02:00.0: version 1.0.1.0-NAPI
    [ 5.450972] [drm] Initialized drm 1.1.0 20060810
    [ 5.527616] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
    [ 5.529303] rtlwifi: wireless switch is on
    [ 5.694564] thinkpad_acpi: ThinkPad ACPI Extras v0.24
    [ 5.694576] thinkpad_acpi: http://ibm-acpi.sf.net/
    [ 5.694582] thinkpad_acpi: ThinkPad BIOS 8RET26WW (1.08 ), EC unknown
    [ 5.694590] thinkpad_acpi: Lenovo ThinkPad X120e, model 30515QG
    [ 5.697439] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
    [ 5.698186] thinkpad_acpi: radio switch found; radios are enabled
    [ 5.698221] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
    [ 5.700698] Registered led device: tpacpi::power
    [ 5.700736] Registered led device: tpacpi::standby
    [ 5.700775] Registered led device: tpacpi::thinkvantage
    [ 5.702194] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
    [ 5.703379] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
    [ 5.708361] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
    [ 5.766552] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMB_.SMB0 1 (20120111/utaddress-251)
    [ 5.766583] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 5.767192] snd_hda_intel 0000:00:01.1: irq 42 for MSI/MSI-X
    [ 5.780051] [drm] radeon defaulting to kernel modesetting.
    [ 5.780059] [drm] radeon kernel modesetting enabled.
    [ 5.817461] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
    [ 5.817754] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
    [ 6.023285] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9
    [ 6.032362] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x17AA:0x21EC).
    [ 6.033956] [drm] register mmio base: 0xF0300000
    [ 6.033959] [drm] register mmio size: 262144
    [ 6.034116] ATOM BIOS: Lenovo
    [ 6.034164] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
    [ 6.034170] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
    [ 6.034639] [drm] Detected VRAM RAM=384M, BAR=256M
    [ 6.034646] [drm] RAM width 32bits DDR
    [ 6.037931] [TTM] Zone kernel: Available graphics memory: 1821664 kiB.
    [ 6.037938] [TTM] Initializing pool allocator.
    [ 6.037949] [TTM] Initializing DMA pool allocator.
    [ 6.038006] [drm] radeon: 384M of VRAM memory ready
    [ 6.038010] [drm] radeon: 512M of GTT memory ready.
    [ 6.038055] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 6.038059] [drm] Driver supports precise vblank timestamp query.
    [ 6.038123] radeon 0000:00:01.0: irq 43 for MSI/MSI-X
    [ 6.038144] radeon 0000:00:01.0: radeon: using MSI.
    [ 6.038191] [drm] radeon: irq initialized.
    [ 6.038201] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [ 6.041298] [drm] radeon: ib pool ready.
    [ 6.043305] [drm] Loading PALM Microcode
    [ 6.088021] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [ 6.088318] radeon 0000:00:01.0: WB enabled
    [ 6.088330] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffff880118705c00
    [ 6.110048] [drm] ring test on 0 succeeded in 1 usecs
    [ 6.111109] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 6.111934] [drm] Radeon Display Connectors
    [ 6.111938] [drm] Connector 0:
    [ 6.111940] [drm] LVDS
    [ 6.111943] [drm] HPD1
    [ 6.111947] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
    [ 6.111950] [drm] Encoders:
    [ 6.111953] [drm] LCD1: INTERNAL_UNIPHY
    [ 6.111956] [drm] Connector 1:
    [ 6.111958] [drm] HDMI-A
    [ 6.111960] [drm] HPD2
    [ 6.111964] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
    [ 6.111967] [drm] Encoders:
    [ 6.111969] [drm] DFP1: INTERNAL_UNIPHY
    [ 6.111971] [drm] Connector 2:
    [ 6.111973] [drm] VGA
    [ 6.111977] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
    [ 6.111980] [drm] Encoders:
    [ 6.111982] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 6.112043] [drm] Internal thermal controller without fan control
    [ 6.112128] [drm] radeon: power management initialized
    [ 6.151134] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x121c00
    [ 6.151161] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
    [ 6.194596] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
    [ 6.588128] [drm] fb mappable at 0xE0142000
    [ 6.588135] [drm] vram apper at 0xE0000000
    [ 6.588139] [drm] size 4325376
    [ 6.588142] [drm] fb depth is 24
    [ 6.588145] [drm] pitch is 5632
    [ 6.588616] fbcon: radeondrmfb (fb0) is primary device
    [ 7.109264] Console: switching to colour frame buffer device 170x48
    [ 7.118245] fb0: radeondrmfb frame buffer device
    [ 7.118248] drm: registered panic notifier
    [ 7.118262] [drm] Initialized radeon 2.13.0 20080528 for 0000:00:01.0 on minor 0
    [ 7.852228] EXT4-fs (sda3): re-mounted. Opts: (null)
    [ 7.961705] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 8.003845] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 8.011207] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 8.094702] Adding 15623208k swap on /dev/sda2. Priority:-1 extents:1 across:15623208k
    [ 9.918662] atl1c 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 9.999979] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 12.082650] IBM TrackPoint firmware: 0x0e, buttons: 3/3
    [ 12.315710] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input11
    [ 13.383760] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 15.701075] wlan0: authenticate with 0c:60:76:4a:8c:44 (try 1)
    [ 15.702630] wlan0: authenticated
    [ 15.725379] wlan0: associate with 0c:60:76:4a:8c:44 (try 1)
    [ 15.728291] wlan0: RX AssocResp from 0c:60:76:4a:8c:44 (capab=0x411 status=0 aid=2)
    [ 15.728299] wlan0: associated
    [ 15.728306] wlan0: moving STA 0c:60:76:4a:8c:44 to state 1
    [ 15.728310] wlan0: moving STA 0c:60:76:4a:8c:44 to state 2
    [ 15.729381] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 16.085499] EXT4-fs (sda3): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered,commit=360
    [ 16.126474] Intel AES-NI instructions are not detected.
    [ 16.133570] EXT4-fs (sda4): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered,commit=360
    [ 16.140127] wlan0: moving STA 0c:60:76:4a:8c:44 to state 3
    [ 16.184502] EXT4-fs (sda1): re-mounted. Opts: user_xattr,acl,barrier=1
    [ 24.359763] EXT4-fs (sda3): re-mounted. Opts: commit=0
    [ 24.565842] EXT4-fs (sda4): re-mounted. Opts: commit=0
    [ 26.590021] wlan0: no IPv6 routers present
    [ 42.605282] fuse init (API version 7.18)
    dmesg with a non-working trackpoint:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.3.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012
    [ 0.000000] Command line: root=/dev/sda3 ro
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
    [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c6efd000 (usable)
    [ 0.000000] BIOS-e820: 00000000c6efd000 - 00000000c730d000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c730d000 - 00000000c738d000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000c738d000 - 00000000c73ed000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000c73ed000 - 00000000c7e00000 (usable)
    [ 0.000000] BIOS-e820: 00000000c7e00000 - 00000000c8000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed81000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 000000011f000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: LENOVO 30515QG/30515QG, BIOS 8RET26WW (1.08 ) 06/20/2011
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x11f000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
    [ 0.000000] 3 base 0FFF90000 mask FFFFF0000 uncachable
    [ 0.000000] 4 base 0FED80000 mask FFFFFF000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] TOM2: 000000011f000000 aka 4592M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] last_pfn = 0xc7e00 max_arch_pfn = 0x400000000
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000c7e00000
    [ 0.000000] 0000000000 - 00c0000000 page 1G
    [ 0.000000] 00c0000000 - 00c7e00000 page 2M
    [ 0.000000] kernel direct mapping tables up to c7e00000 @ 1fffe000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000011f000000
    [ 0.000000] 0100000000 - 011f000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 11f000000 @ c7dfe000-c7e00000
    [ 0.000000] RAMDISK: 37d69000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v04 LENOVO)
    [ 0.000000] ACPI: XSDT 00000000c73ec120 00074 (v01 LENOVO TP-8R 00000003 PTEC 00000002)
    [ 0.000000] ACPI: FACP 00000000c73da000 000F4 (v04 LENOVO TP-8R 00001080 PTL 00000002)
    [ 0.000000] ACPI: DSDT 00000000c73dc000 0EAF9 (v01 LENOVO TP-8R 00001000 PTEC 00001080)
    [ 0.000000] ACPI: FACS 00000000c7378000 00040
    [ 0.000000] ACPI: SLIC 00000000c73eb000 00176 (v01 LENOVO TP-8R 00001080 PTEC 00000001)
    [ 0.000000] ACPI: HPET 00000000c73d9000 00038 (v01 LENOVO TP-8R 00001080 PTL 00000002)
    [ 0.000000] ACPI: APIC 00000000c73d8000 0005E (v02 LENOVO TP-8R 00001080 PTL 00000002)
    [ 0.000000] ACPI: MCFG 00000000c73d7000 0003C (v01 LENOVO TP-8R 00001080 PTL 00000002)
    [ 0.000000] ACPI: UEFI 00000000c73d6000 0003E (v01 LENOVO TP-8R 00001080 PTL 00000002)
    [ 0.000000] ACPI: UEFI 00000000c73d5000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
    [ 0.000000] ACPI: SSDT 00000000c73d4000 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
    [ 0.000000] ACPI: SSDT 00000000c73d2000 012FA (v02 AMD ALIB 00000001 MSFT 04000000)
    [ 0.000000] ACPI: UEFI 00000000c73d1000 0013E (v01 LENOVO TP-8R 00001080 PTL 00000002)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000011f000000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000011f000000
    [ 0.000000] NODE_DATA [000000011effb000 - 000000011effffff]
    [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ac00000-ffff88011e5fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0011f000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009d
    [ 0.000000] 0: 0x00000100 -> 0x000c6efd
    [ 0.000000] 0: 0x000c73ed -> 0x000c7e00
    [ 0.000000] 0: 0x00100000 -> 0x0011f000
    [ 0.000000] On node 0 totalpages: 944285
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3912 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 797008 pages, LIFO batch:31
    [ 0.000000] Normal zone: 1984 pages used for memmap
    [ 0.000000] Normal zone: 124992 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000c6efd000 - 00000000c730d000
    [ 0.000000] PM: Registered nosave memory: 00000000c730d000 - 00000000c738d000
    [ 0.000000] PM: Registered nosave memory: 00000000c738d000 - 00000000c73ed000
    [ 0.000000] PM: Registered nosave memory: 00000000c7e00000 - 00000000c8000000
    [ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed80000
    [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
    [ 0.000000] PM: Registered nosave memory: 00000000fed81000 - 00000000ffe00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:36c00000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011ec00000 s82176 r8192 d24320 u1048576
    [ 0.000000] pcpu-alloc: s82176 r8192 d24320 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 925912
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/sda3 ro
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3637724k/4702208k available (4496k kernel code, 925068k absent, 139416k reserved, 4326k data, 732k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:4352 nr_irqs:512 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 15204352 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgr

    OK, ignore my last post pointing the finger at udev.
    I poked around in the kernel code; it was actually kinda fun. Now this looks more like either a hardware problem (unlikely) or a driver bug (more likely) to me:
    http://ubuntuforums.org/showthread.php?t=1894892
    Thought I'd pass along what I found.
    During a boot, the kernel will "walk" all the buses looking for devices. The methods used to find them on some buses (like PCI) are well defined, while others are not (like the serial bus). On those buses that aren't well defined the kernel will (probably) literally "probe" the bus trying to not only find a device, but also determine the exact chip installed.
    It's the second case that's involved in your problem. The serio driver found the Synaptics touchpad device (via probing). If you look closely at the kernel log, you'll see it's attached to your i8042 (PS/2) chip.  But... since this touchpad device has a "passthru port", it has to perform extra steps to determine if there's a chip on the "other side" of that touchpad chip. In your case there is, and it's your Trackpoint.
    If it's successful in finding the Trackpoint chip, the drivers/input/mouse/trackpoint.c kernel driver file will put the following in your syslog:
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    Which is what you see in your logs when it works. Since you don't see it when it fails, then the code probably isn't being executed or it's failing with an error condition.
    Now... when a driver finds a device, it usually (but not always) creates some virtual "files" in the /sys directory... and that's what will happen if that trackpoint.c code is executed...
    input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input11
    So... one question is... "Does it create something in /sys when it fails?". From looking at the code, I highly doubt it.
    Although this looks somewhat improbable, if the error path for this section of the code in the trackpoint_detect function of /drivers/input/mouse/trackpoint.c file is executed then it looks like it might match your error:
    psmouse->private = kzalloc(sizeof(struct trackpoint_data), GFP_KERNEL);
    if (!psmouse->private)
    return -ENOMEM;
    Perhaps you might want to put some sort of printk call in there to see if that's what's happening. Heck, also add one to the top of the function to see if it's even being called.
    Good luck.

  • [SOLVED] RT2870 drops connection after pacman update

    Since last pacman upgrade my USB wireless works for just a few seconds while used; while watching transfer speed I see at first full speed and then going slower and slower and in a few secs totally stopped, without being disconnected. I have to reboot to get it working again (worked sometimes by ip link set wlan 0 down & up)
    No difference using Wicd or networkmanager.
    I have never had any issues earlier even since Kernel 3.0.
    Linksys router with standard WPA2 configuration, other computers in house connecting without problems.
    lsusb:
    D-Link System DWA-140 RangeBooster N Adapter(rev.B1) [Ralink RT2870]
    uname -r
    3.2.8-1-ARCH
    I've tried blacklisting all the kernel rt2800usb modules which supposedly have taken over specific Realtek drivers according to wiki
    https://wiki.archlinux.org/index.php/Wi … and_rt2870
    with no effect.
    Tried killing wpa_supplicant (only found one instance though) as suggested on some blogpost but no effect.
    Tried the proprietary rt2870sta driver as suggested in Wiki
      https://wiki.archlinux.org/index.php/Rt2870
    -got a working link on ra0 but it wouldn't connect to WiFi (kept asking for password).
    More debug info:
    lsmod | grep rt > lsmod.txt
    exportfs 3695 1 nfsd
    rt2800usb 14400 0
    rt2x00usb 9076 1 rt2800usb
    rt2800lib 40260 1 rt2800usb
    rt2x00lib 35183 3 rt2800lib,rt2x00usb,rt2800usb
    crc_ccitt 1363 1 rt2800lib
    mac80211 228527 3 rt2x00lib,rt2800lib,rt2x00usb
    cfg80211 172260 2 mac80211,rt2x00lib
    iTCO_vendor_support 1961 1 iTCO_wdt
    usbcore 146241 7 ehci_hcd,uhci_hcd,usbhid,rt2x00usb,rt2800usb,usblp
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.2.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 27 21:51:46 CET 2012
    [ 0.000000] Command line: root=/dev/disk/by-uuid/ce706691-4517-477c-a42d-417ab8ffef38 loglevel=3 ro quiet resume=/dev/disk/by-uuid/5a94d96e-0fdd-425a-91c5-6fe96da349f0 nomodeset
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
    [ 0.000000] BIOS-e820: 00000000cff70000 - 00000000cff7e000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000cff7e000 - 00000000cffd0000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: System manufacturer P5Q SE/P5Q SE, BIOS 0502 08/20/2008
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-DFFFF write-protect
    [ 0.000000] E0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 100000000 mask FE0000000 write-back
    [ 0.000000] 2 base 120000000 mask FF0000000 write-back
    [ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
    [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xcff70 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff70000
    [ 0.000000] 0000000000 - 00cfe00000 page 2M
    [ 0.000000] 00cfe00000 - 00cff70000 page 4k
    [ 0.000000] kernel direct mapping tables up to cff70000 @ 1fffa000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
    [ 0.000000] 0100000000 - 0130000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 130000000 @ cff6a000-cff70000
    [ 0.000000] RAMDISK: 37d76000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000fb2c0 00024 (v02 ACPIAM)
    [ 0.000000] ACPI: XSDT 00000000cff70100 0005C (v01 A_M_I_ OEMXSDT 08000820 MSFT 00000097)
    [ 0.000000] ACPI: FACP 00000000cff70290 000F4 (v03 A_M_I_ OEMFACP 08000820 MSFT 00000097)
    [ 0.000000] ACPI: DSDT 00000000cff70440 0907C (v01 A0985 A0985001 00000001 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000cff7e000 00040
    [ 0.000000] ACPI: APIC 00000000cff70390 0006C (v01 A_M_I_ OEMAPIC 08000820 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 00000000cff70400 0003C (v01 A_M_I_ OEMMCFG 08000820 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 00000000cff7e040 00081 (v01 A_M_I_ AMI_OEM 08000820 MSFT 00000097)
    [ 0.000000] ACPI: HPET 00000000cff794c0 00038 (v01 A_M_I_ OEMHPET 08000820 MSFT 00000097)
    [ 0.000000] ACPI: OSFR 00000000cff79500 000B0 (v01 A_M_I_ OEMOSFR 08000820 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000cff7e5d0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-0000000130000000
    [ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
    [ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
    [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00130000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[3] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x000cff70
    [ 0.000000] 0: 0x00100000 -> 0x00130000
    [ 0.000000] On node 0 totalpages: 1048319
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3914 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 831408 pages, LIFO batch:31
    [ 0.000000] Normal zone: 3072 pages used for memmap
    [ 0.000000] Normal zone: 193536 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000cff70000 - 00000000cff7e000
    [ 0.000000] PM: Registered nosave memory: 00000000cff7e000 - 00000000cffd0000
    [ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
    [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
    [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s82176 r8192 d24320 u524288
    [ 0.000000] pcpu-alloc: s82176 r8192 d24320 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028858
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/ce706691-4517-477c-a42d-417ab8ffef38 loglevel=3 ro quiet resume=/dev/disk/by-uuid/5a94d96e-0fdd-425a-91c5-6fe96da349f0 nomodeset
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 4047500k/4980736k available (4488k kernel code, 787460k absent, 145776k reserved, 4409k data, 736k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 2997.032 MHz processor.
    [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 5996.81 BogoMIPS (lpj=9990106)
    [ 0.003340] pid_max: default: 32768 minimum: 301
    [ 0.003361] Security Framework initialized
    [ 0.003367] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006673] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.008366] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.009152] Mount-cache hash table entries: 256
    [ 0.009284] Initializing cgroup subsys cpuacct
    [ 0.009289] Initializing cgroup subsys memory
    [ 0.009297] Initializing cgroup subsys devices
    [ 0.009298] Initializing cgroup subsys freezer
    [ 0.009300] Initializing cgroup subsys net_cls
    [ 0.009302] Initializing cgroup subsys blkio
    [ 0.009332] CPU: Physical Processor ID: 0
    [ 0.009333] CPU: Processor Core ID: 0
    [ 0.009335] mce: CPU supports 6 MCE banks
    [ 0.009342] CPU0: Thermal monitoring enabled (TM2)
    [ 0.009346] using mwait in idle threads.
    [ 0.010343] ACPI: Core revision 20110623
    [ 0.013339] ftrace: allocating 17394 entries in 69 pages
    [ 0.017049] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.050789] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
    [ 0.053330] APIC calibration not consistent with PM-Timer: 97ms instead of 100ms
    [ 0.053330] APIC delta adjusted to PM-Timer: 2081243 (2020688)
    [ 0.053330] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.053330] ... version: 2
    [ 0.053330] ... bit width: 40
    [ 0.053330] ... generic registers: 2
    [ 0.053330] ... value mask: 000000ffffffffff
    [ 0.053330] ... max period: 000000007fffffff
    [ 0.053330] ... fixed-purpose events: 3
    [ 0.053330] ... event mask: 0000000700000003
    [ 0.070123] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.096675] Booting Node 0, Processors #1
    [ 0.096678] smpboot cpu 1: start_ip = 9a000
    [ 0.193349] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.199992] Brought up 2 CPUs
    [ 0.199995] Total of 2 processors activated (11992.51 BogoMIPS).
    [ 0.202833] devtmpfs: initialized
    [ 0.203768] PM: Registering ACPI NVS region at cff7e000 (335872 bytes)
    [ 0.203929] print_constraints: dummy:
    [ 0.203965] NET: Registered protocol family 16
    [ 0.204054] ACPI: bus type pci registered
    [ 0.204105] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.204107] PCI: not using MMCONFIG
    [ 0.204109] PCI: Using configuration type 1 for base access
    [ 0.204490] bio: create slab <bio-0> at 0
    [ 0.204490] ACPI: Added _OSI(Module Device)
    [ 0.204490] ACPI: Added _OSI(Processor Device)
    [ 0.204490] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.204490] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.204490] ACPI: EC: Look up EC in DSDT
    [ 0.206720] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.211061] ACPI: SSDT 00000000cff7e0d0 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
    [ 0.211260] ACPI: Dynamic OEM Table Load:
    [ 0.211262] ACPI: SSDT (null) 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
    [ 0.211420] ACPI: SSDT 00000000cff7e350 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
    [ 0.211621] ACPI: Dynamic OEM Table Load:
    [ 0.211623] ACPI: SSDT (null) 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
    [ 0.211740] ACPI: Interpreter enabled
    [ 0.211743] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.211758] ACPI: Using IOAPIC for interrupt routing
    [ 0.211772] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.212438] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.246853] ACPI: No dock devices found.
    [ 0.246855] HEST: Table not found.
    [ 0.246858] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.246900] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.246996] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.246998] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.247000] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.247001] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
    [ 0.247003] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
    [ 0.247012] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
    [ 0.247043] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
    [ 0.247071] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.247074] pci 0000:00:01.0: PME# disabled
    [ 0.247103] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
    [ 0.247137] pci 0000:00:1a.0: reg 20: [io 0xc800-0xc81f]
    [ 0.247179] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
    [ 0.247213] pci 0000:00:1a.1: reg 20: [io 0xc880-0xc89f]
    [ 0.247254] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
    [ 0.247288] pci 0000:00:1a.2: reg 20: [io 0xcc00-0xcc1f]
    [ 0.247336] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
    [ 0.247354] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
    [ 0.247428] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.247432] pci 0000:00:1a.7: PME# disabled
    [ 0.247451] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
    [ 0.247463] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
    [ 0.247516] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.247519] pci 0000:00:1b.0: PME# disabled
    [ 0.247535] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
    [ 0.247589] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.247592] pci 0000:00:1c.0: PME# disabled
    [ 0.247614] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
    [ 0.247669] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.247672] pci 0000:00:1c.5: PME# disabled
    [ 0.247690] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
    [ 0.247724] pci 0000:00:1d.0: reg 20: [io 0xc080-0xc09f]
    [ 0.247766] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
    [ 0.247800] pci 0000:00:1d.1: reg 20: [io 0xc400-0xc41f]
    [ 0.247841] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
    [ 0.247875] pci 0000:00:1d.2: reg 20: [io 0xc480-0xc49f]
    [ 0.247924] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
    [ 0.247941] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
    [ 0.248016] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.248019] pci 0000:00:1d.7: PME# disabled
    [ 0.248035] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
    [ 0.248084] pci 0000:00:1f.0: [8086:3a18] type 0 class 0x000601
    [ 0.248181] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
    [ 0.248193] pci 0000:00:1f.2: reg 10: [io 0xb000-0xb007]
    [ 0.248199] pci 0000:00:1f.2: reg 14: [io 0xac00-0xac03]
    [ 0.248205] pci 0000:00:1f.2: reg 18: [io 0xa880-0xa887]
    [ 0.248212] pci 0000:00:1f.2: reg 1c: [io 0xa800-0xa803]
    [ 0.248218] pci 0000:00:1f.2: reg 20: [io 0xa480-0xa48f]
    [ 0.248224] pci 0000:00:1f.2: reg 24: [io 0xa400-0xa40f]
    [ 0.248262] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
    [ 0.248274] pci 0000:00:1f.3: reg 10: [mem 0xf9fff400-0xf9fff4ff 64bit]
    [ 0.248290] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
    [ 0.248317] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
    [ 0.248328] pci 0000:00:1f.5: reg 10: [io 0xc000-0xc007]
    [ 0.248335] pci 0000:00:1f.5: reg 14: [io 0xbc00-0xbc03]
    [ 0.248341] pci 0000:00:1f.5: reg 18: [io 0xb880-0xb887]
    [ 0.248347] pci 0000:00:1f.5: reg 1c: [io 0xb800-0xb803]
    [ 0.248353] pci 0000:00:1f.5: reg 20: [io 0xb480-0xb48f]
    [ 0.248359] pci 0000:00:1f.5: reg 24: [io 0xb400-0xb40f]
    [ 0.248418] pci 0000:01:00.0: [10de:05e2] type 0 class 0x000300
    [ 0.248426] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
    [ 0.248434] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.248443] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
    [ 0.248449] pci 0000:01:00.0: reg 24: [io 0xdc00-0xdc7f]
    [ 0.248455] pci 0000:01:00.0: reg 30: [mem 0xfea80000-0xfeafffff pref]
    [ 0.248497] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.248499] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 0.248502] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
    [ 0.248505] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.248536] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
    [ 0.248543] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.248590] pci 0000:02:00.0: [1969:1026] type 0 class 0x000200
    [ 0.248610] pci 0000:02:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
    [ 0.248621] pci 0000:02:00.0: reg 18: [io 0xec00-0xec7f]
    [ 0.248706] pci 0000:02:00.0: PME# supported from D3hot D3cold
    [ 0.248710] pci 0000:02:00.0: PME# disabled
    [ 0.248728] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.248736] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
    [ 0.248739] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
    [ 0.248742] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.248794] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
    [ 0.248801] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.248803] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.248805] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.248807] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.248809] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
    [ 0.248822] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.248885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    [ 0.248906] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.248953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
    [ 0.248985] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    [ 0.249003] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.249005] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.249007] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.254308] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.254341] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.254373] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    [ 0.254405] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.254437] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [ 0.254469] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
    [ 0.254501] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
    [ 0.254533] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    [ 0.254589] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.254589] vgaarb: loaded
    [ 0.254589] vgaarb: bridge control possible 0000:01:00.0
    [ 0.254589] PCI: Using ACPI for IRQ routing
    [ 0.259493] PCI: pci_cache_line_size set to 64 bytes
    [ 0.259546] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    [ 0.259547] reserve RAM buffer: 00000000cff70000 - 00000000cfffffff
    [ 0.259624] NetLabel: Initializing
    [ 0.259626] NetLabel: domain hash size = 128
    [ 0.259627] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.259637] NetLabel: unlabeled traffic allowed by default
    [ 0.259649] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.259653] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.259656] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.270027] Switching to clocksource hpet
    [ 0.274998] pnp: PnP ACPI init
    [ 0.275013] ACPI: bus type pnp registered
    [ 0.275071] pnp 00:00: [bus 00-ff]
    [ 0.275073] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.275074] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.275076] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.275078] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.275079] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [ 0.275081] pnp 00:00: [mem 0xd0000000-0xffffffff window]
    [ 0.275124] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.275131] pnp 00:01: [mem 0xfed14000-0xfed19fff]
    [ 0.275167] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
    [ 0.275170] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.275193] pnp 00:02: [dma 4]
    [ 0.275194] pnp 00:02: [io 0x0000-0x000f]
    [ 0.275196] pnp 00:02: [io 0x0081-0x0083]
    [ 0.275197] pnp 00:02: [io 0x0087]
    [ 0.275198] pnp 00:02: [io 0x0089-0x008b]
    [ 0.275202] pnp 00:02: [io 0x008f]
    [ 0.275203] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.275225] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.275234] pnp 00:03: [io 0x0070-0x0071]
    [ 0.275243] pnp 00:03: [irq 8]
    [ 0.275263] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.275269] pnp 00:04: [io 0x0061]
    [ 0.275290] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.275296] pnp 00:05: [io 0x00f0-0x00ff]
    [ 0.275300] pnp 00:05: [irq 13]
    [ 0.275322] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.275431] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.275433] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.275435] pnp 00:06: [io 0x0290-0x029f]
    [ 0.275467] system 00:06: [io 0x0290-0x029f] has been reserved
    [ 0.275470] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.275531] pnp 00:07: [io 0x0010-0x001f]
    [ 0.275533] pnp 00:07: [io 0x0022-0x003f]
    [ 0.275534] pnp 00:07: [io 0x0044-0x004d]
    [ 0.275536] pnp 00:07: [io 0x0050-0x005f]
    [ 0.275537] pnp 00:07: [io 0x0062-0x0063]
    [ 0.275538] pnp 00:07: [io 0x0065-0x006f]
    [ 0.275540] pnp 00:07: [io 0x0072-0x007f]
    [ 0.275541] pnp 00:07: [io 0x0080]
    [ 0.275542] pnp 00:07: [io 0x0084-0x0086]
    [ 0.275543] pnp 00:07: [io 0x0088]
    [ 0.275545] pnp 00:07: [io 0x008c-0x008e]
    [ 0.275546] pnp 00:07: [io 0x0090-0x009f]
    [ 0.275547] pnp 00:07: [io 0x00a2-0x00bf]
    [ 0.275549] pnp 00:07: [io 0x00e0-0x00ef]
    [ 0.275550] pnp 00:07: [io 0x04d0-0x04d1]
    [ 0.275551] pnp 00:07: [io 0x0800-0x087f]
    [ 0.275553] pnp 00:07: [io 0x0400-0x03ff disabled]
    [ 0.275554] pnp 00:07: [io 0x0500-0x057f]
    [ 0.275556] pnp 00:07: [mem 0xfed08000-0xfed08fff]
    [ 0.275557] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
    [ 0.275558] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
    [ 0.275560] pnp 00:07: [mem 0xfed50000-0xfed8ffff]
    [ 0.275610] system 00:07: [io 0x04d0-0x04d1] has been reserved
    [ 0.275612] system 00:07: [io 0x0800-0x087f] has been reserved
    [ 0.275614] system 00:07: [io 0x0500-0x057f] has been reserved
    [ 0.275616] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
    [ 0.275618] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.275620] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.275622] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
    [ 0.275625] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.275666] pnp 00:08: [mem 0xfed00000-0xfed003ff]
    [ 0.275690] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.275722] pnp 00:09: [mem 0xffb00000-0xffbfffff]
    [ 0.275724] pnp 00:09: [mem 0xfff00000-0xffffffff]
    [ 0.275745] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.275772] pnp 00:0a: [mem 0xffc00000-0xffefffff]
    [ 0.275807] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
    [ 0.275809] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.275845] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.275847] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.275848] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
    [ 0.275850] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
    [ 0.275885] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.275887] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.275889] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.275908] pnp 00:0c: [io 0x0060]
    [ 0.275909] pnp 00:0c: [io 0x0064]
    [ 0.275915] pnp 00:0c: [irq 1]
    [ 0.275945] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.276048] pnp 00:0d: [mem 0xe0000000-0xefffffff]
    [ 0.276083] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.276086] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.276183] pnp 00:0e: [mem 0x00000000-0x0009ffff]
    [ 0.276185] pnp 00:0e: [mem 0x000c0000-0x000cffff]
    [ 0.276187] pnp 00:0e: [mem 0x000e0000-0x000fffff]
    [ 0.276188] pnp 00:0e: [mem 0x00100000-0xcfffffff]
    [ 0.276190] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.276230] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.276232] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
    [ 0.276234] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.276236] system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved
    [ 0.276238] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.276322] pnp: PnP ACPI: found 15 devices
    [ 0.276323] ACPI: ACPI bus type pnp unregistered
    [ 0.282821] PCI: max bus depth: 1 pci_try_num: 2
    [ 0.282845] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.282848] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0200000-0xf05fffff]
    [ 0.282851] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.282853] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.282855] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 0.282857] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
    [ 0.282860] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.282863] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
    [ 0.282865] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
    [ 0.282869] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf05fffff]
    [ 0.282872] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.282877] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
    [ 0.282879] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
    [ 0.282882] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.282885] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.282890] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
    [ 0.282906] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.282909] pci 0000:00:01.0: setting latency timer to 64
    [ 0.282913] pci 0000:00:1c.0: enabling device (0106 -> 0107)
    [ 0.282919] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 0.282922] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.282926] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [ 0.282929] pci 0000:00:1c.5: setting latency timer to 64
    [ 0.282934] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.282937] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.282938] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.282940] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.282942] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.282943] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
    [ 0.282945] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 0.282947] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff]
    [ 0.282949] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.282950] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
    [ 0.282952] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf05fffff]
    [ 0.282954] pci_bus 0000:03: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.282956] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.282957] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
    [ 0.282959] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.282961] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.282962] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.282964] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.282966] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.282967] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xffffffff]
    [ 0.282994] NET: Registered protocol family 2
    [ 0.283102] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.283911] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.286830] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.287221] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.287223] TCP reno registered
    [ 0.287231] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.287261] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.287380] NET: Registered protocol family 1
    [ 0.287533] pci 0000:01:00.0: Boot video device
    [ 0.287538] PCI: CLS 32 bytes, default 64
    [ 0.287587] Unpacking initramfs...
    [ 0.316854] Freeing initrd memory: 2536k freed
    [ 0.317344] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.317346] Placing 64MB software IO TLB between ffff8800cbf6a000 - ffff8800cff6a000
    [ 0.317348] software IO TLB at phys 0xcbf6a000 - 0xcff6a000
    [ 0.317656] audit: initializing netlink socket (disabled)
    [ 0.317668] type=2000 audit(1331070636.316:1): initialized
    [ 0.329229] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.351410] VFS: Disk quotas dquot_6.5.2
    [ 0.351460] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.351537] msgmni has been set to 7910
    [ 0.351674] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.351694] io scheduler noop registered
    [ 0.351696] io scheduler deadline registered
    [ 0.351723] io scheduler cfq registered (default)
    [ 0.351807] pcieport 0000:00:01.0: setting latency timer to 64
    [ 0.351832] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.351871] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.351899] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.351947] pcieport 0000:00:1c.5: setting latency timer to 64
    [ 0.351975] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
    [ 0.352104] intel_idle: MWAIT substates: 0x22220
    [ 0.352105] intel_idle: does not run on family 6 model 23
    [ 0.352132] ERST: Table is not found!
    [ 0.352133] GHES: HEST is not enabled!
    [ 0.352190] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.423563] Linux agpgart interface v0.103
    [ 0.423624] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.423626] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.424352] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.424437] mousedev: PS/2 mouse device common for all mice
    [ 0.424487] rtc_cmos 00:03: RTC can wake from S4
    [ 0.424570] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.424591] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.424600] cpuidle: using governor ladder
    [ 0.424601] cpuidle: using governor menu
    [ 0.424761] TCP cubic registered
    [ 0.424857] NET: Registered protocol family 10
    [ 0.425184] NET: Registered protocol family 17
    [ 0.425187] Registering the dns_resolver key type
    [ 0.425287] PM: Checking hibernation image partition /dev/disk/by-uuid/5a94d96e-0fdd-425a-91c5-6fe96da349f0
    [ 0.442444] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.442457] PM: Hibernation image not present or could not be loaded.
    [ 0.442463] registered taskstats version 1
    [ 0.453068] rtc_cmos 00:03: setting system clock to 2012-03-06 21:50:37 UTC (1331070637)
    [ 0.453104] Initializing network drop monitor service
    [ 0.454145] Freeing unused kernel memory: 736k freed
    [ 0.454268] Write protecting the kernel read-only data: 8192k
    [ 0.458421] Freeing unused kernel memory: 1636k freed
    [ 0.460355] Freeing unused kernel memory: 660k freed
    [ 0.465585] udevd[37]: starting version 181
    [ 0.489348] usbcore: registered new interface driver usbfs
    [ 0.489369] usbcore: registered new interface driver hub
    [ 0.490707] usbcore: registered new device driver usb
    [ 0.492744] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.492777] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.492811] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 0.492815] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 0.492852] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 0.492879] ehci_hcd 0000:00:1a.7: debug port 1
    [ 0.497714] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.497902] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    [ 0.497918] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
    [ 0.500931] SCSI subsystem initialized
    [ 0.504356] libata version 3.00 loaded.
    [ 0.510015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 0.510276] hub 1-0:1.0: USB hub found
    [ 0.510280] hub 1-0:1.0: 6 ports detected
    [ 0.510367] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 0.510390] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 0.510393] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 0.510401] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 0.510423] ehci_hcd 0000:00:1d.7: debug port 1
    [ 0.514289] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [ 0.514303] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
    [ 0.526698] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.526921] hub 2-0:1.0: USB hub found
    [ 0.526924] hub 2-0:1.0: 6 ports detected
    [ 0.527005] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.527010] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 0.527013] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 0.527021] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 0.527047] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
    [ 0.527239] hub 3-0:1.0: USB hub found
    [ 0.527243] hub 3-0:1.0: 2 ports detected
    [ 0.527303] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 0.527308] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 0.527310] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 0.527316] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 0.527341] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
    [ 0.527491] hub 4-0:1.0: USB hub found
    [ 0.527494] hub 4-0:1.0: 2 ports detected
    [ 0.527547] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.527552] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [ 0.527554] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [ 0.527560] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [ 0.527579] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00
    [ 0.527671] hub 5-0:1.0: USB hub found
    [ 0.527673] hub 5-0:1.0: 2 ports detected
    [ 0.527725] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 0.527729] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.527731] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.527737] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [ 0.527755] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
    [ 0.527850] hub 6-0:1.0: USB hub found
    [ 0.527853] hub 6-0:1.0: 2 ports detected
    [ 0.527912] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.527916] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 0.527918] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.527925] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [ 0.527950] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
    [ 0.528041] hub 7-0:1.0: USB hub found
    [ 0.528044] hub 7-0:1.0: 2 ports detected
    [ 0.528095] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.528099] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 0.528102] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.528107] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [ 0.528126] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
    [ 0.528217] hub 8-0:1.0: USB hub found
    [ 0.528220] hub 8-0:1.0: 2 ports detected
    [ 0.528277] ata_piix 0000:00:1f.2: version 2.13
    [ 0.528284] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.528288] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [ 0.528322] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 0.528959] scsi0 : ata_piix
    [ 0.529039] scsi1 : ata_piix
    [ 0.529777] ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
    [ 0.529781] ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
    [ 0.529808] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.529812] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
    [ 0.529848] ata_piix 0000:00:1f.5: setting latency timer to 64
    [ 0.530605] scsi2 : ata_piix
    [ 0.531122] scsi3 : ata_piix
    [ 0.531716] ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 19
    [ 0.531719] ata4: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 19
    [ 0.833346] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [ 0.860625] ata3: SATA link down (SStatus 0 SControl 300)
    [ 0.871253] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.133351] usb 2-5: new high-speed USB device number 4 using ehci_hcd
    [ 1.320013] Refined TSC clocksource calibration: 2996.999 MHz.
    [ 1.320019] Switching to clocksource tsc
    [ 1.326723] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.326735] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.326848] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.326858] ata1.01: SATA link down (SStatus 0 SControl 300)
    [ 1.334172] ata1.00: ATA-7: WDC WD740ADFD-00NLR1, 20.07P20, max UDMA/133
    [ 1.334175] ata1.00: 145226112 sectors, multi 16: LBA48 NCQ (not used)
    [ 1.347438] ata1.00: configured for UDMA/133
    [ 1.347545] scsi 0:0:0:0: Direct-Access ATA WDC WD740ADFD-00 20.0 PQ: 0 ANSI: 5
    [ 1.356883] ata2.00: ATA-7: SAMSUNG HD321KJ, CP100-05, max UDMA7
    [ 1.356887] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.371850] ata2.01: HPA detected: current 1465147055, native 1465149168
    [ 1.371855] ata2.01: ATA-8: WDC WD7500AACS-00ZJB0, 01.01B01, max UDMA/133
    [ 1.371858] ata2.01: 1465147055 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.376886] ata2.00: configured for UDMA/133
    [ 1.390777] ata2.01: configured for UDMA/133
    [ 1.390856] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
    [ 1.390990] scsi 1:0:1:0: Direct-Access ATA WDC WD7500AACS-0 01.0 PQ: 0 ANSI: 5
    [ 1.393373] sd 0:0:0:0: [sda] 145226112 512-byte logical blocks: (74.3 GB/69.2 GiB)
    [ 1.393409] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.393411] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.393427] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.393753] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 1.393840] sd 1:0:0:0: [sdb] Write Protect is off
    [ 1.393843] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.393860] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.394066] sd 1:0:1:0: [sdc] 1465147055 512-byte logical blocks: (750 GB/698 GiB)
    [ 1.404247] sdb: sdb2
    [ 1.404286] sd 1:0:1:0: [sdc] Write Protect is off
    [ 1.404290] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
    [ 1.404316] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.410206] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 1.410713] sdc: sdc1
    [ 1.412675] sd 1:0:1:0: [sdc] Attached SCSI disk
    [ 1.414632] sda: sda1 sda2 sda3
    [ 1.414890] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.483346] usb 7-1: new low-speed USB device number 2 using uhci_hcd
    [ 1.675206] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input1
    [ 1.675328] generic-usb 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0
    [ 1.675340] usbcore: registered new interface driver usbhid
    [ 1.675341] usbhid: USB HID core driver
    [ 1.847718] PM: Starting manual resume from disk
    [ 1.847720] PM: Hibernation image partition 8:2 present
    [ 1.847721] PM: Looking for hibernation image.
    [ 1.847851] PM: Image not found (code -22)
    [ 1.847854] PM: Hibernation image not present or could not be loaded.
    [ 1.887347] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.955372] udevd[142]: starting version 181
    [ 3.102653] FS-Cache: Loaded
    [ 3.138386] RPC: Registered named UNIX socket transport module.
    [ 3.138388] RPC: Registered udp transport module.
    [ 3.138390] RPC: Registered tcp transport module.
    [ 3.138391] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 3.206448] FS-Cache: Netfs 'nfs' registered for caching
    [ 3.340426] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 3.340433] ACPI: Power Button [PWRB]
    [ 3.340480] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 3.340483] ACPI: Power Button [PWRF]
    [ 3.367741] iTCO_vendor_support: vendor-support=0
    [ 3.368037] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 3.368042] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
    [ 3.368043] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.420207] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 3.420218] ATL1E 0000:02:00.0: setting latency timer to 64
    [ 3.460984] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 3.646986] nvidia: module license 'NVIDIA' taints kernel.
    [ 3.646990] Disabling lock debugging due to kernel taint
    [ 3.658130] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 3.658258] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)
    [ 3.658557] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 3.808444] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 3.808451] nvidia 0000:01:00.0: setting latency timer to 64
    [ 3.808456] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 3.808546] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.20 Mon Feb 6 21:07:30 PST 2012
    [ 3.922194] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 3.922239] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    [ 3.922258] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    [ 3.964505] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
    [ 4.187852] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.420014] usb 2-1: reset high-speed USB device number 2 using ehci_hcd
    [ 4.487427] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10B6
    [ 4.487464] usbcore: registered new interface driver usblp
    [ 4.597153] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 4.597522] Registered led device: rt2800usb-phy0::radio
    [ 4.597538] Registered led device: rt2800usb-phy0::assoc
    [ 4.597553] Registered led device: rt2800usb-phy0::quality
    [ 4.597572] usbcore: registered new interface driver rt2800usb
    [ 4.896528] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 4.931213] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.962285] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
    [ 5.004187] Adding 8279036k swap on /dev/sda2. Priority:-1 extents:1 across:8279036k
    [ 5.887306] Installing knfsd (copyright (C) 1996 [email protected]).
    [ 36.076486] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 36.077062] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 50.139089] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 53.445833] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 53.490782] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 53.491333] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 53.732458] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 57.151881] wlan0: authenticate with c0:c1:c0:36:e7:5d (try 1)
    [ 57.153391] wlan0: authenticated
    [ 57.170628] wlan0: associate with c0:c1:c0:36:e7:5d (try 1)
    [ 57.174138] wlan0: RX AssocResp from c0:c1:c0:36:e7:5d (capab=0x411 status=0 aid=1)
    [ 57.174142] wlan0: associated
    [ 57.197936] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 57.264846] Intel AES-NI instructions are not detected.
    [ 67.456668] wlan0: no IPv6 routers present
    [ 306.299972] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
    [ 306.300485] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 310.963856] wlan0: deauthenticating from c0:c1:c0:36:e7:5d by local choice (reason=3)
    [ 311.091991] cfg80211: Calling CRDA to update world regulatory domain
    [ 311.342430] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 313.239060] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 314.375684] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 314.545703] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 314.545818] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
    [ 314.581962] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 314.582102] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
    [ 314.582703] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 314.583112] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 325.469976] eth0: no IPv6 routers present
    Last edited by dabbi2000 (2012-03-07 22:57:16)

    certainly didn't expect this... turned off power saving
    iwconfig wlan0 power off
    and all is well again. Surely doesn't explain why it started after kernel update. But it works...

  • Problem with usb devices

    hi guys,
    i have a problem with my usb devices.
    the dmesg:
    Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009
    Command line: root=/dev/sda5 vga=0x0361 ro
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    Centaur CentaurHauls
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
    BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
    BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
    BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    DMI present.
    Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    last_pfn = 0x7fed0 max_arch_pfn = 0x100000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask F80000000 write-back
    1 base 07FF00000 mask FFFF00000 uncachable
    2 disabled
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Scanning 0 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009f800 (usable)
    modified: 000000000009f800 - 00000000000a0000 (reserved)
    modified: 00000000000ce000 - 00000000000d0000 (reserved)
    modified: 00000000000dc000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000007fed0000 (usable)
    modified: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
    modified: 000000007fee3000 - 0000000080000000 (reserved)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fed00000 - 00000000fed00400 (reserved)
    modified: 00000000fed14000 - 00000000fed1a000 (reserved)
    modified: 00000000fed1c000 - 00000000fed90000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000ff000000 - 0000000100000000 (reserved)
    init_memory_mapping: 0000000000000000-000000007fed0000
    0000000000 - 007fe00000 page 2M
    007fe00000 - 007fed0000 page 4k
    kernel direct mapping tables up to 7fed0000 @ 10000-14000
    RAMDISK: 37d42000 - 37fefc39
    ACPI: RSDP 00000000000f7fe0 00024 (v02 PTLTD )
    ACPI: XSDT 000000007fedab41 0008C (v01 Sony VAIO 20070418 PTL 00000000)
    ACPI: FACP 000000007fee1bd2 000F4 (v03 Sony VAIO 20070418 PTL 00000001)
    ACPI: DSDT 000000007fedbeeb 05C73 (v02 Sony VAIO 20070418 PTL 20050624)
    ACPI: FACS 000000007fee2fc0 00040
    ACPI: APIC 000000007fee1cc6 00068 (v01 Sony VAIO 20070418 PTL 0000005A)
    ACPI: HPET 000000007fee1d2e 00038 (v01 Sony VAIO 20070418 PTL 0000005A)
    ACPI: MCFG 000000007fee1d66 0003C (v01 Sony VAIO 20070418 PTL 0000005A)
    ACPI: TCPA 000000007fee1da2 00032 (v01 Sony VAIO 20070418 PTL 00005A52)
    ACPI: SLIC 000000007fee1dd4 00176 (v01 Sony VAIO 20070418 PTL 01000000)
    ACPI: TMOR 000000007fee1f4a 00026 (v01 Sony VAIO 20070418 PTL 00000003)
    ACPI: APIC 000000007fee1f70 00068 (v01 Sony VAIO 20070418 PTL 00000000)
    ACPI: BOOT 000000007fee1fd8 00028 (v01 Sony VAIO 20070418 PTL 00000001)
    ACPI: SSDT 000000007fedbc29 002C2 (v01 Sony VAIO 20070418 PTL 20050624)
    ACPI: SSDT 000000007fedb159 0025F (v01 Sony VAIO 20070418 PTL 20050624)
    ACPI: SSDT 000000007fedb0b3 000A6 (v01 Sony VAIO 20070418 PTL 20050624)
    ACPI: SSDT 000000007fedabcd 004E6 (v01 Sony VAIO 20070418 PTL 20050624)
    ACPI: BIOS bug: multiple APIC/MADT found, using 0
    ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
    ACPI: Local APIC address 0xfee00000
    (7 early reservations) ==> bootmem [0000000000 - 007fed0000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    #2 [0000200000 - 000082d0d0] TEXT DATA BSS ==> [0000200000 - 000082d0d0]
    #3 [0037d42000 - 0037fefc39] RAMDISK ==> [0037d42000 - 0037fefc39]
    #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
    #5 [000082e000 - 000082e204] BRK ==> [000082e000 - 000082e204]
    #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
    found SMP MP-table at [ffff8800000f8010] f8010
    [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00100000
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0007fed0
    On node 0 totalpages: 523871
    DMA zone: 56 pages used for memmap
    DMA zone: 1682 pages reserved
    DMA zone: 2245 pages, LIFO batch:0
    DMA32 zone: 7108 pages used for memmap
    DMA32 zone: 512780 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
    PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
    PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
    PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
    NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 25 pages at ffff880001010000, static data 72352 bytes
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515025
    Kernel command line: root=/dev/sda5 vga=0x0361 ro
    Initializing CPU#0
    NR_IRQS:768
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Extended CMOS year: 2000
    Fast TSC calibration using PIT
    Detected 1994.610 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 2053736k/2095936k available (3409k kernel code, 452k absent, 41160k reserved, 1239k data, 464k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    hpet clockevent registered
    HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.43 BogoMIPS (lpj=6648700)
    Security Framework initialized
    Mount-cache hash table entries: 256
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    ACPI: Core revision 20090320
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 3991.23 BogoMIPS (lpj=6649976)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU1: Thermal monitoring enabled (TM2)
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Total of 2 processors activated (7982.67 BogoMIPS).
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    net_namespace: 1888 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    PCI: MCFG area at e0000000 reserved in E820
    PCI: Using MMCONFIG at e0000000 - efffffff
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE storm detected, transactions will use polling mode
    ACPI: EC: missing confirmations, switch off interrupt mode.
    [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in poll mode
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
    pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
    pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc404800-0xfc404bff]
    pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.7: PME# disabled
    pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc400000-0xfc403fff]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.2: PME# disabled
    pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.4: PME# disabled
    pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f]
    pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f]
    pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f]
    pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc404c00-0xfc404fff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
    pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
    pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
    pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
    pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
    pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af]
    pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df]
    pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf]
    pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7]
    pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb]
    pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
    pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc404000-0xfc4047ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
    pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
    pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff]
    pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
    pci 0000:01:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff]
    pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
    pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
    pci 0000:00:01.0: bridge 32bit mmio: [0xcc000000-0xceffffff]
    pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
    pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
    pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
    pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
    pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff]
    pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
    pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff]
    pci 0000:06:00.0: reg 10 32bit mmio: [0xfa000000-0xfa000fff]
    pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
    pci 0000:06:00.0: PME# disabled
    pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff]
    pci 0000:00:1c.2: bridge 32bit mmio: [0xfa000000-0xfbffffff]
    pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff]
    pci 0000:08:00.0: reg 10 64bit mmio: [0xfc000000-0xfc003fff]
    pci 0000:08:00.0: reg 18 io port: [0x6000-0x60ff]
    pci 0000:08:00.0: supports D1 D2
    pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:08:00.0: PME# disabled
    pci 0000:00:1c.4: bridge io port: [0x6000-0x6fff]
    pci 0000:00:1c.4: bridge 32bit mmio: [0xfc000000-0xfc0fffff]
    pci 0000:09:03.0: reg 10 32bit mmio: [0xfc100000-0xfc100fff]
    pci 0000:09:03.0: supports D1 D2
    pci 0000:09:03.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:09:03.0: PME# disabled
    pci 0000:09:03.1: reg 10 32bit mmio: [0xfc102000-0xfc1027ff]
    pci 0000:09:03.1: reg 14 32bit mmio: [0xfc104000-0xfc107fff]
    pci 0000:09:03.1: supports D1 D2
    pci 0000:09:03.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:09:03.1: PME# disabled
    pci 0000:09:03.2: reg 10 32bit mmio: [0xfc101000-0xfc101fff]
    pci 0000:09:03.2: supports D1 D2
    pci 0000:09:03.2: PME# supported from D0 D1 D2 D3hot
    pci 0000:09:03.2: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    pci 0000:00:1e.0: bridge 32bit mmio: [0xfc100000-0xfc1fffff]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    Switched to high resolution mode on CPU 0
    Switched to high resolution mode on CPU 1
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
    system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
    system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
    system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
    system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
    system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
    system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
    system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
    system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
    system 00:06: ioport range 0x680-0x69f has been reserved
    system 00:06: ioport range 0x800-0x80f has been reserved
    system 00:06: ioport range 0x1000-0x107f has been reserved
    system 00:06: ioport range 0x1180-0x11bf has been reserved
    system 00:06: ioport range 0x1640-0x164f has been reserved
    system 00:06: ioport range 0xfe00-0xfe7f has been reserved
    system 00:06: ioport range 0xfe80-0xfeff has been reserved
    pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x2000-0x2fff
    pci 0000:00:01.0: MEM window: 0xcc000000-0xceffffff
    pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1c.0: IO window: 0x3000-0x3fff
    pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff
    pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
    pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
    pci 0000:00:1c.1: IO window: 0x4000-0x4fff
    pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff
    pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff
    pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
    pci 0000:00:1c.2: IO window: 0x5000-0x5fff
    pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff
    pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff
    pci 0000:00:1c.4: PCI bridge, secondary bus 0000:08
    pci 0000:00:1c.4: IO window: 0x6000-0x6fff
    pci 0000:00:1c.4: MEM window: 0xfc000000-0xfc0fffff
    pci 0000:00:1c.4: PREFETCH window: disabled
    pci 0000:09:03.0: CardBus bridge, secondary bus 0000:0a
    pci 0000:09:03.0: IO window: 0x007000-0x0070ff
    pci 0000:09:03.0: IO window: 0x007400-0x0074ff
    pci 0000:09:03.0: PREFETCH window: 0x88000000-0x8bffffff
    pci 0000:09:03.0: MEM window: 0x90000000-0x93ffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
    pci 0000:00:1e.0: IO window: 0x7000-0x7fff
    pci 0000:00:1e.0: MEM window: 0xfc100000-0xfc1fffff
    pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:1c.2: setting latency timer to 64
    pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.4: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
    pci_bus 0000:01: resource 1 mem: [0xcc000000-0xceffffff]
    pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
    pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
    pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff]
    pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
    pci_bus 0000:04: resource 0 io: [0x4000-0x4fff]
    pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff]
    pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff]
    pci_bus 0000:06: resource 0 io: [0x5000-0x5fff]
    pci_bus 0000:06: resource 1 mem: [0xfa000000-0xfbffffff]
    pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf5ffffff]
    pci_bus 0000:08: resource 0 io: [0x6000-0x6fff]
    pci_bus 0000:08: resource 1 mem: [0xfc000000-0xfc0fffff]
    pci_bus 0000:09: resource 0 io: [0x7000-0x7fff]
    pci_bus 0000:09: resource 1 mem: [0xfc100000-0xfc1fffff]
    pci_bus 0000:09: resource 2 pref mem [0x88000000-0x8bffffff]
    pci_bus 0000:09: resource 3 io: [0x00-0xffff]
    pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:0a: resource 0 io: [0x7000-0x70ff]
    pci_bus 0000:0a: resource 1 io: [0x7400-0x74ff]
    pci_bus 0000:0a: resource 2 pref mem [0x88000000-0x8bffffff]
    pci_bus 0000:0a: resource 3 mem: [0x90000000-0x93ffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs...
    Freeing initrd memory: 2743k freed
    Simple Boot Flag at 0x36 set to 0x1
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1249997463.944:1): initialized
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 4017
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:00.0: Boot video device
    pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
    pcieport-driver 0000:00:01.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
    pcieport-driver 0000:00:1c.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
    pcieport-driver 0000:00:1c.1: setting latency timer to 64
    pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
    pcieport-driver 0000:00:1c.2: setting latency timer to 64
    pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
    pcieport-driver 0000:00:1c.4: setting latency timer to 64
    vesafb: framebuffer at 0xcd000000, mapped to 0xffffc20010100000, using 8000k, total 14336k
    vesafb: mode is 1280x800x32, linelength=5120, pages=1
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Console: switching to colour frame buffer device 160x50
    fb0: VESA VGA frame buffer device
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 464k freed
    SCSI subsystem initialized
    libata version 3.00 loaded.
    pata_acpi 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    pata_acpi 0000:00:1f.1: setting latency timer to 64
    pata_acpi 0000:00:1f.1: PCI INT A disabled
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
    ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 29
    ata2: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 29
    ata3: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404200 irq 29
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2: SATA link down (SStatus 0 SControl 300)
    ata3: SATA link down (SStatus 0 SControl 300)
    ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    ata1.00: ATA-7: FUJITSU MHV2200BT, 0000004F, max UDMA/100
    ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    ata1.00: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2200B 0000 PQ: 0 ANSI: 5
    ata_piix 0000:00:1f.1: version 2.13
    ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    ata_piix 0000:00:1f.1: setting latency timer to 64
    scsi3 : ata_piix
    scsi4 : ata_piix
    ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
    ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
    ata4.00: ATAPI: MATSHITABD-MLT UJ-220V, 1.00, max UDMA/33
    ata4.00: configured for UDMA/33
    scsi 3:0:0:0: CD-ROM MATSHITA BD-MLT UJ-220V 1.00 PQ: 0 ANSI: 5
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
    Intel AES-NI instructions are not detected.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with writeback data mode.
    rtc_cmos 00:07: RTC can wake from S4
    rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    udev: starting version 141
    sky2 driver version 1.22
    sky2 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    sky2 0000:08:00.0: setting latency timer to 64
    sky2 0000:08:00.0: Yukon-2 FE chip revision 1
    sky2 0000:08:00.0: irq 30 for MSI/MSI-X
    sky2 eth0: addr 00:13:a9:c1:09:33
    cfg80211: Calling CRDA to update world regulatory domain
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    scsi 3:0:0:0: Attached scsi generic sg1 type 5
    ACPI: AC Adapter [ADP1] (on-line)
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    ACPI: Lid Switch [LID0]
    input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    ACPI: Power Button [PWRB]
    ACPI: SSDT 000000007fedb8e7 0027A (v01 Sony VAIO 20070418 PTL 20050624)
    ACPI: SSDT 000000007fedb3b8 004AA (v01 Sony VAIO 20070418 PTL 20050624)
    ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI_CPU:00: registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: SSDT 000000007fedbb61 000C8 (v01 Sony VAIO 20070418 PTL 20050624)
    ACPI: SSDT 000000007fedb862 00085 (v01 Sony VAIO 20070418 PTL 20050624)
    ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI_CPU:01: registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [TZ00] (58 C)
    input: PC Speaker as /devices/platform/pcspkr/input/input4
    sony-laptop: Sony Notebook Control Driver v0.6.
    input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:29/SNY5001:00/input/input5
    input: Sony Vaio Jogdial as /devices/virtual/input/input6
    ACPI: Invalid active0 threshold
    iTCO_vendor_support: vendor-support=0
    thermal LNXTHERM:02: registered as thermal_zone1
    ACPI: Thermal Zone [TZ01] (58 C)
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ACPI: Battery Slot [BAT0] (battery present)
    i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    ehci_hcd 0000:00:1a.7: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: debug port 1
    ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404800
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1a.0: setting latency timer to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1a.1: setting latency timer to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input7
    input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8
    usb 1-2: new high speed USB device using ehci_hcd and address 2
    usb 1-2: configuration #1 chosen from 1 choice
    usb 2-3: new high speed USB device using ehci_hcd and address 3
    nvidia: module license 'NVIDIA' taints kernel.
    Disabling lock debugging due to kernel taint
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    yenta_cardbus 0000:09:03.0: CardBus bridge found [104d:9005]
    yenta_cardbus 0000:09:03.0: Using CSCINT to route CSC interrupts to PCI
    yenta_cardbus 0000:09:03.0: Routing CardBus interrupts to PCI
    yenta_cardbus 0000:09:03.0: TI: mfunc 0x01121b22, devctl 0x64
    usb 2-3: configuration #1 chosen from 1 choice
    nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    nvidia 0000:01:00.0: setting latency timer to 64
    NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.31 Tue Jul 28 17:52:27 PDT 2009
    yenta_cardbus 0000:09:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
    yenta_cardbus 0000:09:03.0: Socket status: 30000006
    pci_bus 0000:09: Raising subordinate bus# of parent bus (#09) from #0a to #0d
    yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
    yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge Memory window: 0xfc100000 - 0xfc1fffff
    yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
    iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
    iwl3945: Copyright(c) 2003-2009 Intel Corporation
    iwl3945 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    iwl3945 0000:06:00.0: setting latency timer to 64
    ohci1394 0000:09:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Driver 'sr' needs updating - please use bus_type methods
    sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 3:0:0:0: Attached scsi CD-ROM sr0
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc102000-fc1027ff] Max Packet=[2048] IR/IT contexts=[4/8]
    tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    hub 2-0:1.0: unable to enumerate USB device on port 5
    iwl3945 0000:06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
    iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG
    iwl3945 0000:06:00.0: irq 31 for MSI/MSI-X
    Initializing USB Mass Storage driver...
    scsi5 : SCSI emulation for USB Mass Storage devices
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usb-storage: device found at 3
    usb-storage: waiting for device to settle before scanning
    input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input9
    input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input10
    usb 5-1: new low speed USB device using uhci_hcd and address 2
    usbcore: registered new interface driver hiddev
    Linux video capture interface: v2.00
    input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.1/input/input11
    generic-usb 0003:1058:1102.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:1d.7-3/input1
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1837)
    uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
    uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
    uvcvideo: Failed to initialize the device (-5).
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    phy0: Selected rate control algorithm 'iwl-3945-rs'
    usb 5-1: configuration #1 chosen from 1 choice
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input12
    generic-usb 0003:046D:C518.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input13
    generic-usb 0003:046D:C518.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
    fuse init (API version 7.11)
    vboxdrv: Trying to deactivate the NMI watchdog permanently...
    vboxdrv: Successfully done.
    vboxdrv: Found 2 processor cores.
    VBoxDrv: dbg - g_abExecMemory=ffffffffa0f05760
    vboxdrv: fAsync=0 offMin=0x1ae offMax=0x125c
    vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    vboxdrv: Successfully loaded version 3.0.4 (interface 0x000e0000).
    VBoxNetFlt: dbg - g_abExecMemory=ffffffffa10a9f00
    hub 2-0:1.0: unable to enumerate USB device on port 5
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460302564f69]
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    Clocksource tsc unstable (delta = -435934901 ns)
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    EXT3 FS on dm-0, internal journal
    scsi 5:0:0:0: Direct-Access WD My Book 1028 PQ: 0 ANSI: 4
    sd 5:0:0:0: Attached scsi generic sg2 type 0
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    sd 5:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
    sd 5:0:0:0: [sdb] Write Protect is off
    sd 5:0:0:0: [sdb] Mode Sense: 10 00 00 00
    sd 5:0:0:0: [sdb] Assuming drive cache: write through
    usb-storage: device scan complete
    sd 5:0:0:0: [sdb] Assuming drive cache: write through
    sdb: sdb1
    sd 5:0:0:0: [sdb] Attached SCSI disk
    EXT4-fs: barriers enabled
    kjournald2 starting: pid 1929, dev dm-1:8, commit interval 5 seconds
    EXT4 FS on dm-1, internal journal on dm-1:8
    EXT4-fs: delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs: mounted filesystem dm-1 with ordered data mode
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    Adding 2449872k swap on /dev/sda6. Priority:-1 extents:1 across:2449872k
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    iwl3945 0000:06:00.0: firmware: requesting iwlwifi-3945-2.ucode
    hub 2-0:1.0: unable to enumerate USB device on port 5
    iwl3945 0000:06:00.0: loaded firmware version 15.32.2.9
    Registered led device: iwl-phy0::radio
    Registered led device: iwl-phy0::assoc
    Registered led device: iwl-phy0::RX
    Registered led device: iwl-phy0::TX
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    wlan0: authenticate with AP 00:11:6b:10:2f:bc
    wlan0: authenticated
    wlan0: associate with AP 00:11:6b:10:2f:bc
    wlan0: RX AssocResp from 00:11:6b:10:2f:bc (capab=0x471 status=0 aid=1)
    wlan0: associated
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    i think the result is, that my bluetooth and webcam isn't working...
    can you help me pls.
    regards nigg
    Last edited by nigg (2009-08-11 14:14:57)

    I'm also having this problem. It's happening with my USB flash disk. I was almost buying another one when I tried it with Windows Vista on the same machine and it worked ok, then I tried Arch Linux (with kernel 2.6.30.5) on another machine and got the same error. After that I tried Ubuntu and it worked ok. Seems that Arch's kernel doesn't like my USB flash disk.
    Last edited by esdrasbeleza (2009-09-02 01:16:09)

  • Nouveau problem after update

    I installed the system (latest ISO release), and updated it with "# pacman -Syu" (kernel updated from 2.6.33 to 2.6.34) and rebooted.
    Now, when the booting log is coming to udev, the monitor just is turning off, it doesn't receive any signal, the led is blinking.
    I booted from the CD and blacklisted nouveau in rc.conf, then I could boot the system, here is the log file when it tried nouveau:
    Jul 21 00:40:46 linux shutdown[18098]: shutting down for system reboot
    Jul 21 00:40:46 linux init: Switching to runlevel: 6
    Jul 21 00:42:19 linux kernel: Initializing cgroup subsys cpuset
    Jul 21 00:42:19 linux kernel: Initializing cgroup subsys cpu
    Jul 21 00:42:19 linux kernel: Linux version 2.6.34-ARCH (tobias@T-POWA-LX) (gcc version 4.5.0 20100610 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010
    Jul 21 00:42:19 linux kernel: Command line: cryptdevice=/dev/sdb2:dm_root root=/dev/mapper/dm_root ro
    Jul 21 00:42:19 linux kernel: BIOS-provided physical RAM map:
    Jul 21 00:42:19 linux kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    Jul 21 00:42:19 linux kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    Jul 21 00:42:19 linux kernel: BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    Jul 21 00:42:19 linux kernel: BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
    Jul 21 00:42:19 linux kernel: BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data)
    Jul 21 00:42:19 linux kernel: BIOS-e820: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS)
    Jul 21 00:42:19 linux kernel: BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
    Jul 21 00:42:19 linux kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    Jul 21 00:42:19 linux kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Jul 21 00:42:19 linux kernel: BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
    Jul 21 00:42:19 linux kernel: NX (Execute Disable) protection: active
    Jul 21 00:42:19 linux kernel: DMI 2.4 present.
    Jul 21 00:42:19 linux kernel: AMI BIOS detected: BIOS may corrupt low RAM, working around it.
    Jul 21 00:42:19 linux kernel: No AGP bridge found
    Jul 21 00:42:19 linux kernel: last_pfn = 0x130000 max_arch_pfn = 0x400000000
    Jul 21 00:42:19 linux kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Jul 21 00:42:19 linux kernel: last_pfn = 0xcff80 max_arch_pfn = 0x400000000
    Jul 21 00:42:19 linux kernel: Scanning 0 areas for low memory corruption
    Jul 21 00:42:19 linux kernel: modified physical RAM map:
    Jul 21 00:42:19 linux kernel: modified: 0000000000000000 - 0000000000010000 (reserved)
    Jul 21 00:42:19 linux kernel: modified: 0000000000010000 - 000000000009fc00 (usable)
    Jul 21 00:42:19 linux kernel: modified: 000000000009fc00 - 00000000000a0000 (reserved)
    Jul 21 00:42:19 linux kernel: modified: 00000000000e4000 - 0000000000100000 (reserved)
    Jul 21 00:42:19 linux kernel: modified: 0000000000100000 - 00000000cff80000 (usable)
    Jul 21 00:42:19 linux kernel: modified: 00000000cff80000 - 00000000cff8e000 (ACPI data)
    Jul 21 00:42:19 linux kernel: modified: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS)
    Jul 21 00:42:19 linux kernel: modified: 00000000cffe0000 - 00000000d0000000 (reserved)
    Jul 21 00:42:19 linux kernel: modified: 00000000fee00000 - 00000000fee01000 (reserved)
    Jul 21 00:42:19 linux kernel: modified: 00000000fff00000 - 0000000100000000 (reserved)
    Jul 21 00:42:19 linux kernel: modified: 0000000100000000 - 0000000130000000 (usable)
    Jul 21 00:42:19 linux kernel: found SMP MP-table at [ffff8800000ff780] ff780
    Jul 21 00:42:19 linux kernel: init_memory_mapping: 0000000000000000-00000000cff80000
    Jul 21 00:42:19 linux kernel: init_memory_mapping: 0000000100000000-0000000130000000
    Jul 21 00:42:19 linux kernel: RAMDISK: 37cb2000 - 37ff0000
    Jul 21 00:42:19 linux kernel: ACPI: RSDP 00000000000fbcc0 00014 (v00 ACPIAM)
    Jul 21 00:42:19 linux kernel: ACPI: RSDT 00000000cff80000 0003C (v01 A_M_I_ OEMRSDT 12000711 MSFT 00000097)
    Jul 21 00:42:19 linux kernel: ACPI: FACP 00000000cff80200 00084 (v02 A_M_I_ OEMFACP 12000711 MSFT 00000097)
    Jul 21 00:42:19 linux kernel: ACPI: DSDT 00000000cff805c0 090B7 (v01 A0753 A0753001 00000001 INTL 20060113)
    Jul 21 00:42:19 linux kernel: ACPI: FACS 00000000cff8e000 00040
    Jul 21 00:42:19 linux kernel: ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC 12000711 MSFT 00000097)
    Jul 21 00:42:19 linux kernel: ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG 12000711 MSFT 00000097)
    Jul 21 00:42:19 linux kernel: ACPI: OEMB 00000000cff8e040 00081 (v01 A_M_I_ AMI_OEM 12000711 MSFT 00000097)
    Jul 21 00:42:19 linux kernel: ACPI: HPET 00000000cff89680 00038 (v01 A_M_I_ OEMHPET 12000711 MSFT 00000097)
    Jul 21 00:42:19 linux kernel: ACPI: OSFR 00000000cff896c0 000B0 (v01 A_M_I_ OEMOSFR 12000711 MSFT 00000097)
    Jul 21 00:42:19 linux kernel: Zone PFN ranges:
    Jul 21 00:42:19 linux kernel: DMA 0x00000010 -> 0x00001000
    Jul 21 00:42:19 linux kernel: DMA32 0x00001000 -> 0x00100000
    Jul 21 00:42:19 linux kernel: Normal 0x00100000 -> 0x00130000
    Jul 21 00:42:19 linux kernel: Movable zone start PFN for each node
    Jul 21 00:42:19 linux kernel: early_node_map[3] active PFN ranges
    Jul 21 00:42:19 linux kernel: 0: 0x00000010 -> 0x0000009f
    Jul 21 00:42:19 linux kernel: 0: 0x00000100 -> 0x000cff80
    Jul 21 00:42:19 linux kernel: 0: 0x00100000 -> 0x00130000
    Jul 21 00:42:19 linux kernel: ACPI: PM-Timer IO Port: 0x808
    Jul 21 00:42:19 linux kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Jul 21 00:42:19 linux kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Jul 21 00:42:19 linux kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    Jul 21 00:42:19 linux kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    Jul 21 00:42:19 linux kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    Jul 21 00:42:19 linux kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    Jul 21 00:42:19 linux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Jul 21 00:42:19 linux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Jul 21 00:42:19 linux kernel: Using ACPI (MADT) for SMP configuration information
    Jul 21 00:42:19 linux kernel: ACPI: HPET id: 0xffffffff base: 0xfed00000
    Jul 21 00:42:19 linux kernel: SMP: Allowing 4 CPUs, 2 hotplug CPUs
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000cff8e000 - 00000000cffe0000
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
    Jul 21 00:42:19 linux kernel: Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
    Jul 21 00:42:19 linux kernel: Booting paravirtualized kernel on bare hardware
    Jul 21 00:42:19 linux kernel: setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
    Jul 21 00:42:19 linux kernel: PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88232 r8192 d22360 u524288
    Jul 21 00:42:19 linux kernel: pcpu-alloc: s88232 r8192 d22360 u524288 alloc=1*2097152
    Jul 21 00:42:19 linux kernel: pcpu-alloc: [0] 0 1 2 3
    Jul 21 00:42:19 linux kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031311
    Jul 21 00:42:19 linux kernel: Kernel command line: cryptdevice=/dev/sdb2:dm_root root=/dev/mapper/dm_root ro
    Jul 21 00:42:19 linux kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Jul 21 00:42:19 linux kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Jul 21 00:42:19 linux kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Jul 21 00:42:19 linux kernel: Checking aperture...
    Jul 21 00:42:19 linux kernel: No AGP bridge found
    Jul 21 00:42:19 linux kernel: Subtract (57 early reservations)
    Jul 21 00:42:19 linux kernel: #1 [0001000000 - 00016e1178] TEXT DATA BSS
    Jul 21 00:42:19 linux kernel: #2 [0037cb2000 - 0037ff0000] RAMDISK
    Jul 21 00:42:19 linux kernel: #3 [00016e2000 - 00016e2278] BRK
    Jul 21 00:42:19 linux kernel: #4 [00000ff790 - 0000100000] BIOS reserved
    Jul 21 00:42:19 linux kernel: #5 [00000ff780 - 00000ff790] MP-table mpf
    Jul 21 00:42:19 linux kernel: #6 [000009fc00 - 00000f1530] BIOS reserved
    Jul 21 00:42:19 linux kernel: #7 [00000f169c - 00000ff780] BIOS reserved
    Jul 21 00:42:19 linux kernel: #8 [00000f1530 - 00000f169c] MP-table mpc
    Jul 21 00:42:19 linux kernel: #9 [0000010000 - 0000012000] TRAMPOLINE
    Jul 21 00:42:19 linux kernel: #10 [0000012000 - 0000016000] ACPI WAKEUP
    Jul 21 00:42:19 linux kernel: #11 [0000016000 - 000001a000] PGTABLE
    Jul 21 00:42:19 linux kernel: #12 [000001a000 - 000001b000] PGTABLE
    Jul 21 00:42:19 linux kernel: #13 [00016e2280 - 00016e3280] BOOTMEM
    Jul 21 00:42:19 linux kernel: #14 [000001b000 - 000001b200] BOOTMEM
    Jul 21 00:42:19 linux kernel: #15 [0001ee4000 - 0001ee5000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #16 [0001ee5000 - 0001ee6000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #17 [0002000000 - 0005a00000] MEMMAP 0
    Jul 21 00:42:19 linux kernel: #18 [00016e3280 - 00016fb280] BOOTMEM
    Jul 21 00:42:19 linux kernel: #19 [00016fb280 - 0001713280] BOOTMEM
    Jul 21 00:42:19 linux kernel: #20 [0001713280 - 000172b280] BOOTMEM
    Jul 21 00:42:19 linux kernel: #21 [000172c000 - 000172d000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #22 [00016e1180 - 00016e11c1] BOOTMEM
    Jul 21 00:42:19 linux kernel: #23 [00016e1200 - 00016e1243] BOOTMEM
    Jul 21 00:42:19 linux kernel: #24 [00016e1280 - 00016e14e8] BOOTMEM
    Jul 21 00:42:19 linux kernel: #25 [00016e1500 - 00016e1568] BOOTMEM
    Jul 21 00:42:19 linux kernel: #26 [00016e1580 - 00016e15e8] BOOTMEM
    Jul 21 00:42:19 linux kernel: #27 [00016e1600 - 00016e1668] BOOTMEM
    Jul 21 00:42:19 linux kernel: #28 [00016e1680 - 00016e16e8] BOOTMEM
    Jul 21 00:42:19 linux kernel: #29 [00016e1700 - 00016e1768] BOOTMEM
    Jul 21 00:42:19 linux kernel: #30 [00016e1780 - 00016e17e8] BOOTMEM
    Jul 21 00:42:19 linux kernel: #31 [00016e1800 - 00016e1868] BOOTMEM
    Jul 21 00:42:19 linux kernel: #32 [00016e1880 - 00016e18e8] BOOTMEM
    Jul 21 00:42:19 linux kernel: #33 [00016e1900 - 00016e1968] BOOTMEM
    Jul 21 00:42:19 linux kernel: #34 [00016e1980 - 00016e19e8] BOOTMEM
    Jul 21 00:42:19 linux kernel: #35 [00016e1a00 - 00016e1a20] BOOTMEM
    Jul 21 00:42:19 linux kernel: #36 [00016e1a40 - 00016e1a60] BOOTMEM
    Jul 21 00:42:19 linux kernel: #37 [00016e1a80 - 00016e1aba] BOOTMEM
    Jul 21 00:42:19 linux kernel: #38 [00016e1ac0 - 00016e1afa] BOOTMEM
    Jul 21 00:42:19 linux kernel: #39 [0001800000 - 000181d000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #40 [0001880000 - 000189d000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #41 [0001900000 - 000191d000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #42 [0001980000 - 000199d000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #43 [00016e1b00 - 00016e1b08] BOOTMEM
    Jul 21 00:42:19 linux kernel: #44 [00016e1b40 - 00016e1b48] BOOTMEM
    Jul 21 00:42:19 linux kernel: #45 [00016e1b80 - 00016e1b90] BOOTMEM
    Jul 21 00:42:19 linux kernel: #46 [00016e1bc0 - 00016e1be0] BOOTMEM
    Jul 21 00:42:19 linux kernel: #47 [00016e1c00 - 00016e1d30] BOOTMEM
    Jul 21 00:42:19 linux kernel: #48 [00016e1d40 - 00016e1d90] BOOTMEM
    Jul 21 00:42:19 linux kernel: #49 [00016e1dc0 - 00016e1e10] BOOTMEM
    Jul 21 00:42:19 linux kernel: #50 [000172d000 - 0001735000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #51 [000199d000 - 0001d9d000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #52 [0005a00000 - 0005c00000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #53 [0005c00000 - 0009c00000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #54 [0001735000 - 0001755000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #55 [0001755000 - 0001795000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #56 [000001ba00 - 0000023a00] BOOTMEM
    Jul 21 00:42:19 linux kernel: Memory: 4050632k/4980736k available (3484k kernel code, 787396k absent, 142708k reserved, 1796k data, 480k init)
    Jul 21 00:42:19 linux kernel: SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Jul 21 00:42:19 linux kernel: Hierarchical RCU implementation.
    Jul 21 00:42:19 linux kernel: NR_IRQS:768
    Jul 21 00:42:19 linux kernel: Console: colour VGA+ 80x25
    Jul 21 00:42:19 linux kernel: console [tty0] enabled
    Jul 21 00:42:19 linux kernel: allocated 41943040 bytes of page_cgroup
    Jul 21 00:42:19 linux kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Jul 21 00:42:19 linux kernel: Fast TSC calibration using PIT
    Jul 21 00:42:19 linux kernel: Detected 3005.707 MHz processor.
    Jul 21 00:42:19 linux kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 6013.88 BogoMIPS (lpj=10019023)
    Jul 21 00:42:19 linux kernel: Security Framework initialized
    Jul 21 00:42:19 linux kernel: Mount-cache hash table entries: 256
    Jul 21 00:42:19 linux kernel: Initializing cgroup subsys ns
    Jul 21 00:42:19 linux kernel: Initializing cgroup subsys cpuacct
    Jul 21 00:42:19 linux kernel: Initializing cgroup subsys memory
    Jul 21 00:42:19 linux kernel: Initializing cgroup subsys devices
    Jul 21 00:42:19 linux kernel: Initializing cgroup subsys freezer
    Jul 21 00:42:19 linux kernel: Initializing cgroup subsys net_cls
    Jul 21 00:42:19 linux kernel: CPU: Physical Processor ID: 0
    Jul 21 00:42:19 linux kernel: CPU: Processor Core ID: 0
    Jul 21 00:42:19 linux kernel: mce: CPU supports 6 MCE banks
    Jul 21 00:42:19 linux kernel: CPU0: Thermal monitoring enabled (TM2)
    Jul 21 00:42:19 linux kernel: using mwait in idle threads.
    Jul 21 00:42:19 linux kernel: Performance Events: Core2 events, Intel PMU driver.
    Jul 21 00:42:19 linux kernel: ... version: 2
    Jul 21 00:42:19 linux kernel: ... bit width: 40
    Jul 21 00:42:19 linux kernel: ... generic registers: 2
    Jul 21 00:42:19 linux kernel: ... value mask: 000000ffffffffff
    Jul 21 00:42:19 linux kernel: ... max period: 000000007fffffff
    Jul 21 00:42:19 linux kernel: ... fixed-purpose events: 3
    Jul 21 00:42:19 linux kernel: ... event mask: 0000000700000003
    Jul 21 00:42:19 linux kernel: ACPI: Core revision 20100121
    Jul 21 00:42:19 linux kernel: Setting APIC routing to flat
    Jul 21 00:42:19 linux kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Jul 21 00:42:19 linux kernel: CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
    Jul 21 00:42:19 linux kernel: Booting Node 0, Processors #1
    Jul 21 00:42:19 linux kernel: Brought up 2 CPUs
    Jul 21 00:42:19 linux kernel: Total of 2 processors activated (12027.40 BogoMIPS).
    Jul 21 00:42:19 linux kernel: devtmpfs: initialized
    Jul 21 00:42:19 linux kernel: NET: Registered protocol family 16
    Jul 21 00:42:19 linux kernel: ACPI: bus type pci registered
    Jul 21 00:42:19 linux kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Jul 21 00:42:19 linux kernel: PCI: not using MMCONFIG
    Jul 21 00:42:19 linux kernel: PCI: Using configuration type 1 for base access
    Jul 21 00:42:19 linux kernel: bio: create slab <bio-0> at 0
    Jul 21 00:42:19 linux kernel: ACPI: Executed 1 blocks of module-level executable AML code
    Jul 21 00:42:19 linux kernel: ACPI: SSDT 00000000cff8e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
    Jul 21 00:42:19 linux kernel: ACPI: SSDT 00000000cff8e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
    Jul 21 00:42:19 linux kernel: ACPI: Interpreter enabled
    Jul 21 00:42:19 linux kernel: ACPI: (supports S0 S1 S3 S4 S5)
    Jul 21 00:42:19 linux kernel: ACPI: Using IOAPIC for interrupt routing
    Jul 21 00:42:19 linux kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Jul 21 00:42:19 linux kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    Jul 21 00:42:19 linux kernel: ACPI: No dock devices found.
    Jul 21 00:42:19 linux kernel: PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    Jul 21 00:42:19 linux kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
    Jul 21 00:42:19 linux kernel: pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
    Jul 21 00:42:19 linux kernel: pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
    Jul 21 00:42:19 linux kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
    Jul 21 00:42:19 linux kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: PCI bridge to [bus 04-04]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: PCI bridge to [bus 02-02]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
    Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
    Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
    Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    Jul 21 00:42:19 linux kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    Jul 21 00:42:19 linux kernel: vgaarb: loaded
    Jul 21 00:42:19 linux kernel: PCI: Using ACPI for IRQ routing
    Jul 21 00:42:19 linux kernel: NetLabel: Initializing
    Jul 21 00:42:19 linux kernel: NetLabel: domain hash size = 128
    Jul 21 00:42:19 linux kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Jul 21 00:42:19 linux kernel: NetLabel: unlabeled traffic allowed by default
    Jul 21 00:42:19 linux kernel: HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    Jul 21 00:42:19 linux kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    Jul 21 00:42:19 linux kernel: hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    Jul 21 00:42:19 linux kernel: Switching to clocksource tsc
    Jul 21 00:42:19 linux kernel: pnp: PnP ACPI init
    Jul 21 00:42:19 linux kernel: ACPI: bus type pnp registered
    Jul 21 00:42:19 linux kernel: pnp: PnP ACPI: found 14 devices
    Jul 21 00:42:19 linux kernel: ACPI: ACPI bus type pnp unregistered
    Jul 21 00:42:19 linux kernel: system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:06: [io 0x0290-0x0297] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [io 0x04d0-0x04d1] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [io 0x0800-0x087f] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [io 0x0480-0x04bf] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xffa00000-0xffafffff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xffe00000-0xffefffff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
    Jul 21 00:42:19 linux kernel: system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
    Jul 21 00:42:19 linux kernel: system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
    Jul 21 00:42:19 linux kernel: system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
    Jul 21 00:42:19 linux kernel: pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe9fffff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: PCI bridge to [bus 04-04]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: PCI bridge to [bus 02-02]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1e.0: PCI bridge to [bus 05-05]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1e.0: bridge window [mem disabled]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1e.0: bridge window [mem pref disabled]
    Jul 21 00:42:19 linux kernel: pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: enabling device (0106 -> 0107)
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: enabling device (0106 -> 0107)
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    Jul 21 00:42:19 linux kernel: NET: Registered protocol family 2
    Jul 21 00:42:19 linux kernel: IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Jul 21 00:42:19 linux kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    Jul 21 00:42:19 linux kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    Jul 21 00:42:19 linux kernel: TCP: Hash tables configured (established 262144 bind 65536)
    Jul 21 00:42:19 linux kernel: TCP reno registered
    Jul 21 00:42:19 linux kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes)
    Jul 21 00:42:19 linux kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    Jul 21 00:42:19 linux kernel: NET: Registered protocol family 1
    Jul 21 00:42:19 linux kernel: Unpacking initramfs...
    Jul 21 00:42:19 linux kernel: Freeing initrd memory: 3320k freed
    Jul 21 00:42:19 linux kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Jul 21 00:42:19 linux kernel: Placing 64MB software IO TLB between ffff880005c00000 - ffff880009c00000
    Jul 21 00:42:19 linux kernel: software IO TLB at phys 0x5c00000 - 0x9c00000
    Jul 21 00:42:19 linux kernel: Scanning for low memory corruption every 60 seconds
    Jul 21 00:42:19 linux kernel: audit: initializing netlink socket (disabled)
    Jul 21 00:42:19 linux kernel: type=2000 audit(1279654888.309:1): initialized
    Jul 21 00:42:19 linux kernel: VFS: Disk quotas dquot_6.5.2
    Jul 21 00:42:19 linux kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Jul 21 00:42:19 linux kernel: msgmni has been set to 7917
    Jul 21 00:42:19 linux kernel: alg: No test for stdrng (krng)
    Jul 21 00:42:19 linux kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    Jul 21 00:42:19 linux kernel: io scheduler noop registered
    Jul 21 00:42:19 linux kernel: io scheduler deadline registered
    Jul 21 00:42:19 linux kernel: io scheduler cfq registered (default)
    Jul 21 00:42:19 linux kernel: pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS
    Jul 21 00:42:19 linux kernel: pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: no _OSC support
    Jul 21 00:42:19 linux kernel: pcie_pme: probe of 0000:00:01.0:pcie01 failed with error -13
    Jul 21 00:42:19 linux kernel: pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
    Jul 21 00:42:19 linux kernel: pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: no _OSC support
    Jul 21 00:42:19 linux kernel: pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13
    Jul 21 00:42:19 linux kernel: pcieport 0000:00:1c.4: Requesting control of PCIe PME from ACPI BIOS
    Jul 21 00:42:19 linux kernel: pcieport 0000:00:1c.4: Failed to receive control of PCIe PME service: no _OSC support
    Jul 21 00:42:19 linux kernel: pcie_pme: probe of 0000:00:1c.4:pcie01 failed with error -13
    Jul 21 00:42:19 linux kernel: pcieport 0000:00:1c.5: Requesting control of PCIe PME from ACPI BIOS
    Jul 21 00:42:19 linux kernel: pcieport 0000:00:1c.5: Failed to receive control of PCIe PME service: no _OSC support
    Jul 21 00:42:19 linux kernel: pcie_pme: probe of 0000:00:1c.5:pcie01 failed with error -13
    Jul 21 00:42:19 linux kernel: Linux agpgart interface v0.103
    Jul 21 00:42:19 linux kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jul 21 00:42:19 linux kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Jul 21 00:42:19 linux kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Jul 21 00:42:19 linux kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    Jul 21 00:42:19 linux kernel: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    Jul 21 00:42:19 linux kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Jul 21 00:42:19 linux kernel: mice: PS/2 mouse device common for all mice
    Jul 21 00:42:19 linux kernel: cpuidle: using governor ladder
    Jul 21 00:42:19 linux kernel: cpuidle: using governor menu
    Jul 21 00:42:19 linux kernel: TCP cubic registered
    Jul 21 00:42:19 linux kernel: NET: Registered protocol family 17
    Jul 21 00:42:19 linux kernel: registered taskstats version 1
    Jul 21 00:42:19 linux kernel: Initalizing network drop monitor service
    Jul 21 00:42:19 linux kernel: Freeing unused kernel memory: 480k freed
    Jul 21 00:42:19 linux kernel: udev: starting version 160
    Jul 21 00:42:19 linux kernel: usbcore: registered new interface driver usbfs
    Jul 21 00:42:19 linux kernel: usbcore: registered new interface driver hub
    Jul 21 00:42:19 linux kernel: usbcore: registered new device driver usb
    Jul 21 00:42:19 linux kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1a.7: debug port 1
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
    Jul 21 00:42:19 linux kernel: SCSI subsystem initialized
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    Jul 21 00:42:19 linux kernel: hub 1-0:1.0: USB hub found
    Jul 21 00:42:19 linux kernel: hub 1-0:1.0: 6 ports detected
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1d.7: debug port 1
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
    Jul 21 00:42:19 linux kernel: uhci_hcd: USB Universal Host Controller Interface driver
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    Jul 21 00:42:19 linux kernel: hub 2-0:1.0: USB hub found
    Jul 21 00:42:19 linux kernel: hub 2-0:1.0: 6 ports detected
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
    Jul 21 00:42:19 linux kernel: hub 3-0:1.0: USB hub found
    Jul 21 00:42:19 linux kernel: hub 3-0:1.0: 2 ports detected
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
    Jul 21 00:42:19 linux kernel: hub 4-0:1.0: USB hub found
    Jul 21 00:42:19 linux kernel: hub 4-0:1.0: 2 ports detected
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
    Jul 21 00:42:19 linux kernel: hub 5-0:1.0: USB hub found
    Jul 21 00:42:19 linux kernel: hub 5-0:1.0: 2 ports detected
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
    Jul 21 00:42:19 linux kernel: hub 6-0:1.0: USB hub found
    Jul 21 00:42:19 linux kernel: hub 6-0:1.0: 2 ports detected
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
    Jul 21 00:42:19 linux kernel: hub 7-0:1.0: USB hub found
    Jul 21 00:42:19 linux kernel: hub 7-0:1.0: 2 ports detected
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
    Jul 21 00:42:19 linux kernel: hub 8-0:1.0: USB hub found
    Jul 21 00:42:19 linux kernel: hub 8-0:1.0: 2 ports detected
    Jul 21 00:42:19 linux kernel: pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
    Jul 21 00:42:19 linux kernel: pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Jul 21 00:42:19 linux kernel: scsi0 : pata_jmicron
    Jul 21 00:42:19 linux kernel: scsi1 : pata_jmicron
    Jul 21 00:42:19 linux kernel: ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
    Jul 21 00:42:19 linux kernel: ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
    Jul 21 00:42:19 linux kernel: ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
    Jul 21 00:42:19 linux kernel: ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
    Jul 21 00:42:19 linux kernel: scsi2 : ata_piix
    Jul 21 00:42:19 linux kernel: scsi3 : ata_piix
    Jul 21 00:42:19 linux kernel: ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
    Jul 21 00:42:19 linux kernel: ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
    Jul 21 00:42:19 linux kernel: ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
    Jul 21 00:42:19 linux kernel: ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
    Jul 21 00:42:19 linux kernel: scsi4 : ata_piix
    Jul 21 00:42:19 linux kernel: scsi5 : ata_piix
    Jul 21 00:42:19 linux kernel: ata5: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
    Jul 21 00:42:19 linux kernel: ata6: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
    Jul 21 00:42:19 linux kernel: ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jul 21 00:42:19 linux kernel: ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    Jul 21 00:42:19 linux kernel: ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
    Jul 21 00:42:19 linux kernel: scsi6 : ahci
    Jul 21 00:42:19 linux kernel: scsi7 : ahci
    Jul 21 00:42:19 linux kernel: ata7: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe100 irq 16
    Jul 21 00:42:19 linux kernel: ata8: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe180 irq 16
    Jul 21 00:42:19 linux kernel: ata4: SATA link down (SStatus 0 SControl 300)
    Jul 21 00:42:19 linux kernel: ata7: SATA link down (SStatus 0 SControl 300)
    Jul 21 00:42:19 linux kernel: ata8: SATA link down (SStatus 0 SControl 300)
    Jul 21 00:42:19 linux kernel: usb 4-1: new low speed USB device using uhci_hcd and address 2
    Jul 21 00:42:19 linux kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Jul 21 00:42:19 linux kernel: ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Jul 21 00:42:19 linux kernel: ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Jul 21 00:42:19 linux kernel: ata5.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB03, max UDMA/100
    Jul 21 00:42:19 linux kernel: ata5.00: configured for UDMA/100
    Jul 21 00:42:19 linux kernel: ata3.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133
    Jul 21 00:42:19 linux kernel: ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Jul 21 00:42:19 linux kernel: ata3.00: configured for UDMA/133
    Jul 21 00:42:19 linux kernel: scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
    Jul 21 00:42:19 linux kernel: scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB03 PQ: 0 ANSI: 5
    Jul 21 00:42:19 linux kernel: ata6.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
    Jul 21 00:42:19 linux kernel: ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Jul 21 00:42:19 linux kernel: ata6.00: configured for UDMA/133
    Jul 21 00:42:19 linux kernel: scsi 5:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
    Jul 21 00:42:19 linux kernel: sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    Jul 21 00:42:19 linux kernel: sd 2:0:0:0: [sda] Write Protect is off
    Jul 21 00:42:19 linux kernel: sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jul 21 00:42:19 linux kernel: sda:
    Jul 21 00:42:19 linux kernel: sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    Jul 21 00:42:19 linux kernel: sd 5:0:0:0: [sdb] Write Protect is off
    Jul 21 00:42:19 linux kernel: sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jul 21 00:42:19 linux kernel: sdb:sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    Jul 21 00:42:19 linux kernel: Uniform CD-ROM driver Revision: 3.20
    Jul 21 00:42:19 linux kernel: sda1 sda2 < sdb1 sdb2 sdb3 sdb4 < sda5 sdb5 sdb6 sda6 >
    Jul 21 00:42:19 linux kernel: sd 2:0:0:0: [sda] Attached SCSI disk
    Jul 21 00:42:19 linux kernel: sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 >
    Jul 21 00:42:19 linux kernel: sd 5:0:0:0: [sdb] Attached SCSI disk
    Jul 21 00:42:19 linux kernel: usbcore: registered new interface driver hiddev
    Jul 21 00:42:19 linux kernel: input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input0
    Jul 21 00:42:19 linux kernel: generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1a.1-1/input0
    Jul 21 00:42:19 linux kernel: usbcore: registered new interface driver usbhid
    Jul 21 00:42:19 linux kernel: usbhid: USB HID core driver
    Jul 21 00:42:19 linux kernel: usb 8-1: new low speed USB device using uhci_hcd and address 2
    Jul 21 00:42:19 linux kernel: input: KYE 4D device Ergomedia as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
    Jul 21 00:42:19 linux kernel: generic-usb 0003:05D5:8001.0002: input,hidraw1: USB HID v1.10 Keyboard [KYE 4D device Ergomedia] on usb-0000:00:1d.2-1/input0
    Jul 21 00:42:19 linux kernel: input: KYE 4D device Ergomedia as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input2
    Jul 21 00:42:19 linux kernel: generic-usb 0003:05D5:8001.0003: input,hidraw2: USB HID v1.10 Device [KYE 4D device Ergomedia] on usb-0000:00:1d.2-1/input1
    Jul 21 00:42:19 linux kernel: device-mapper: uevent: version 1.0.3
    Jul 21 00:42:19 linux kernel: device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
    Jul 21 00:42:19 linux kernel: Intel AES-NI instructions are not detected.
    Jul 21 00:42:19 linux kernel: padlock: VIA PadLock not detected.
    Jul 21 00:42:19 linux kernel: SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    Jul 21 00:42:19 linux kernel: SGI XFS Quota Management subsystem
    Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-0
    Jul 21 00:42:19 linux kernel: rtc_cmos 00:03: RTC can wake from S4
    Jul 21 00:42:19 linux kernel: rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    Jul 21 00:42:19 linux kernel: rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    Jul 21 00:42:19 linux kernel: udev: starting version 160
    Jul 21 00:42:19 linux kernel: input: PC Speaker as /devices/platform/pcspkr/input/input3
    Jul 21 00:42:19 linux kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    Jul 21 00:42:19 linux kernel: ACPI: Power Button [PWRB]
    Jul 21 00:42:19 linux kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    Jul 21 00:42:19 linux kernel: ACPI: Power Button [PWRF]
    Jul 21 00:42:19 linux kernel: iTCO_vendor_support: vendor-support=0
    Jul 21 00:42:19 linux kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    Jul 21 00:42:19 linux kernel: iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
    Jul 21 00:42:19 linux kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    Jul 21 00:42:19 linux kernel: i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Jul 21 00:42:19 linux kernel: ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x0400-0x040f 64bit pref]
    Jul 21 00:42:19 linux kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Jul 21 00:42:19 linux kernel: sd 2:0:0:0: Attached scsi generic sg0 type 0
    Jul 21 00:42:19 linux kernel: sr 4:0:0:0: Attached scsi generic sg1 type 5
    Jul 21 00:42:19 linux kernel: sd 5:0:0:0: Attached scsi generic sg2 type 0
    Jul 21 00:42:19 linux kernel: ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
    Jul 21 00:42:19 linux kernel: ne2k-pci 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    Jul 21 00:42:19 linux kernel: eth0: [removed]
    Jul 21 00:42:19 linux kernel: atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Jul 21 00:42:19 linux kernel: atl1 0000:02:00.0: version 2.1.3
    Jul 21 00:42:19 linux kernel: [drm] Initialized drm 1.1.0 20060810
    Jul 21 00:42:19 linux kernel: nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x094100a1)
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
    Jul 21 00:42:19 linux kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: ... appears to be valid
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: BIT BIOS found
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Bios version 62.94.11.00
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00000030
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCE32
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD21B
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE176
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE2A5
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE4B5
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE51A
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xE51A: Condition still not met after 20ms, skipping following opcodes
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE26: parsing output script 0
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE26: parsing output script 0
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xA862: parsing output script 0
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
    Jul 21 00:42:19 linux kernel: hda_codec: ALC883: BIOS auto-probing.
    Jul 21 00:42:19 linux kernel: input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
    Jul 21 00:42:19 linux kernel: [TTM] Zone kernel: Available graphics memory: 2027216 kiB.
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
    Jul 21 00:42:19 linux kernel: mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DAC output
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a TMDS output
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DAC output
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a TMDS output
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a TV connector
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: no encoders, ignoring
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x40250000, bo ffff88012beb8000
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE2A: parsing output script 1
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE2B: parsing output script 2
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xBCF0: parsing clock script 0
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xB3E9: parsing clock script 1
    Jul 21 00:42:19 linux kernel: Console: switching to colour frame buffer device 180x56
    Jul 21 00:42:19 linux kernel: fb0: nouveaufb frame buffer device
    Jul 21 00:42:19 linux kernel: registered panic notifier
    Jul 21 00:42:19 linux kernel: [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
    Jul 21 00:42:19 linux kernel: XFS mounting filesystem sdb1
    Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-1
    Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-3
    Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-4
    Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-2
    Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-5
    Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-6
    Jul 21 00:42:19 linux kernel: Adding 979928k swap on /dev/mapper/dm_swap. Priority:-1 extents:1 across:979928k
    Jul 21 00:42:19 linux kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
    Jul 21 00:42:19 linux kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    Jul 21 00:42:19 linux kernel: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
    Jul 21 00:42:19 linux kernel: nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
    Jul 21 00:42:19 linux kernel: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
    Jul 21 00:42:19 linux init: Entering runlevel: 3
    Jul 21 00:43:17 linux shutdown[3617]: shutting down for system reboot
    Jul 21 00:43:18 linux init: Switching to runlevel: 6
    It was very strange for me, because I had no idea about the KMS thing...
    I thought it must be because I haven't installed x86-video-nouveau, so I installed xorg and x86-video-nouveau, un-blacklisted the nouveau module, but the same error happened. I blacklisted it again, booted. Now when trying "modprobe nouveau" in the fully booted system the monitor still goes the same bad way, reboot, here is the log of that try:
    Jul 21 02:19:36 linux kernel: [drm] Initialized drm 1.1.0 20060810
    Jul 21 02:19:36 linux kernel: nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x094100a1)
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: ... appears to be valid
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: BIT BIOS found
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Bios version 62.94.11.00
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00000030
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCE32
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD21B
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE176
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE2A5
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE4B5
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE51A
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xE51A: Condition still not met after 20ms, skipping following opcodes
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE26: parsing output script 0
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE26: parsing output script 0
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xA862: parsing output script 0
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
    Jul 21 02:19:37 linux kernel: [TTM] Zone kernel: Available graphics memory: 2027216 kiB.
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
    Jul 21 02:19:37 linux kernel: mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DAC output
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a TMDS output
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DAC output
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a TMDS output
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a TV connector
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: no encoders, ignoring
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x40250000, bo ffff88012adae000
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE2A: parsing output script 1
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE2B: parsing output script 2
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xBCF0: parsing clock script 0
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xB3E9: parsing clock script 1
    Jul 21 02:19:37 linux kernel: Console: switching to colour frame buffer device 180x56
    Jul 21 02:19:37 linux kernel: fb0: nouveaufb frame buffer device
    Jul 21 02:19:37 linux kernel: registered panic notifier
    Jul 21 02:19:37 linux kernel: [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
    I can start xorg with vesa driver now, but would be nice to have nouveau working, here are some config files and other information:
    # cat /boot/grub/menu.lst
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    # Linux Grub
    # /dev/fd0 (fd0)
    # /dev/sda (hd0)
    # /dev/sdb2 (hd1,1)
    # /dev/sda3 (hd0,2)
    # FRAMEBUFFER RESOLUTION SETTINGS
    # +-------------------------------------------------+
    # | 640x480 800x600 1024x768 1280x1024
    # ----+--------------------------------------------
    # 256 | 0x301=769 0x303=771 0x305=773 0x307=775
    # 32K | 0x310=784 0x313=787 0x316=790 0x319=793
    # 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
    # 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
    # +-------------------------------------------------+
    # for more details and different resolutions see
    # http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution
    # general configuration:
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    # (0) Arch Linux
    title Arch Linux
    root (hd0,0)
    kernel /vmlinuz26 cryptdevice=/dev/sdb2:dm_root root=/dev/mapper/dm_root ro
    initrd /kernel26.img
    # (1) Arch Linux
    title Arch Linux Fallback
    root (hd0,0)
    kernel /vmlinuz26 cryptdevice=/dev/sdb2:dm_root root=/dev/mapper/dm_root ro
    initrd /kernel26-fallback.img
    # (2) Windows
    #title Windows
    #rootnoverify (hd1,0)
    #makeactive
    #chainloader +1
    # cat /etc/rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.UTF-8"
    HARDWARECLOCK="UTC"
    TIMEZONE="Europe/Paris"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(!nouveau)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="arch-linux"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    #Static IP example
    eth0="eth0 192.168.0.1 netmask 255.255.255.252 broadcast 192.168.0.3"
    eth1="eth1 10.0.1.7 netmask 255.255.255.0 broadcast 10.0.1.255"
    INTERFACES=(!eth0 eth1)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 10.0.1.1"
    ROUTES=(gateway)
    # Setting this to "yes" will skip network shutdown.
    # This is required if your root device is on NFS.
    NETWORK_PERSIST="no"
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng dbus iptables network netfs crond alsa)
    # pacman -Qs video
    local/libxv 1.0.5-1
    X11 Video extension library
    local/libxxf86vm 1.1.0-1
    X11 XFree86 video mode extension library
    local/videoproto 2.3.0-1
    X11 Video extension wire protocol
    local/xf86-video-nouveau 0.0.16_git20100517-1
    Open Source 3D acceleration driver for nVidia cards (experimental)
    local/xf86-video-vesa 2.3.0-2 (xorg xorg-video-drivers)
    X.org vesa video driver
    local/xf86vidmodeproto 2.3-1
    X11 Video Mode extension wire protocol
    I think the problem is in "TMDS table revision 2.0 not currently supported", I just found that issue in http://nouveau.freedesktop.org/wiki/TroubleShooting.
    As I can understand, there is no more nouveau-drm (I could find one only for LTS kernel) package (to try to update from AUR) and it is injected in the mainline kernel? What can I do now?
    Thank you.
    Last edited by arch_archer (2010-07-21 17:37:38)

    Ooops, I must have accidentally clicked 'Submit' - I didn't mean to post it.
    Try using some more nouveau goodness. I have no idea why nouveau-drm is unavailable atm - it was here yesterday ...
    http://arm.kh.nu/search/index.php?a=32& … ommunity=1 <- this is for 32-bit
    Last edited by karol (2010-07-21 00:01:30)

  • System freezing

    Hi all.
    I would first like to say thank you in advance to anyone who takes the time to look at this. 
    I am new to archlinux and semi new to linux in general.  I have installed arch on my desktop and it runs fine for what seems like a random amount of time.  Xfce just freezes and I can not do anything to make the system responsive.  control-alt-backspace,  SysRq keys, virtual console switching, etc.  Nothing seems to work.  I can not even SSH into the box from another machine once it has locked up. 
    Any help anyone can give me would be greatly greatly appreciated.
    I have attached some of my logs below along with lsmod, lspci dmesg output in case that helps.
    EDIT:
    I have edited my post and put my output between code tags.  Sorry about that.  New to the forums and I was not sure what the proper etiquette was.  Posting my logs and command output as raw text felt wrong but I was not sure what the alternative was.  I see now that with a bit of research I should have been able to find the correct way to post that stuff.  I apologise for littering up the forum. 
    lspci output:
    00:00.0 Memory controller: NVIDIA Corporation CK804 Memory Controller (rev a3)
    00:01.0 ISA bridge: NVIDIA Corporation CK804 ISA Bridge (rev a3)
    00:01.1 SMBus: NVIDIA Corporation CK804 SMBus (rev a2)
    00:02.0 USB controller: NVIDIA Corporation CK804 USB Controller (rev a2)
    00:02.1 USB controller: NVIDIA Corporation CK804 USB Controller (rev a3)
    00:04.0 Multimedia audio controller: NVIDIA Corporation CK804 AC'97 Audio Controller (rev a2)
    00:06.0 IDE interface: NVIDIA Corporation CK804 IDE (rev a2)
    00:07.0 IDE interface: NVIDIA Corporation CK804 Serial ATA Controller (rev a3)
    00:08.0 IDE interface: NVIDIA Corporation CK804 Serial ATA Controller (rev a3)
    00:09.0 PCI bridge: NVIDIA Corporation CK804 PCI Bridge (rev a2)
    00:0a.0 Bridge: NVIDIA Corporation CK804 Ethernet Controller (rev a3)
    00:0b.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev a3)
    00:0c.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev a3)
    00:0d.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev a3)
    00:0e.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev a3)
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    01:00.0 VGA compatible controller: NVIDIA Corporation NV45 [GeForce 6800 GTO] (rev a2)
    05:07.0 Network controller: Broadcom Corporation BCM4306 802.11bg Wireless Network Controller (rev 02)
    05:0a.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02)
    05:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx]
    05:0c.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
    lsmod output:
    Module Size Used by
    aes_i586 6940 2
    cryptd 7023 0
    aes_generic 26054 1 aes_i586
    nvidia 10925239 40
    arc4 1118 2
    b43legacy 94382 0
    mac80211 336883 1 b43legacy
    cfg80211 153196 2 mac80211,b43legacy
    rfkill 12600 1 cfg80211
    ssb 41732 1 b43legacy
    snd_intel8x0 22672 2
    snd_cs4236 22144 0
    pcmcia 31438 1 ssb
    snd_mpu401 3568 0
    snd_wavefront 28274 0
    mmc_core 73191 1 ssb
    snd_ac97_codec 89900 1 snd_intel8x0
    snd_wss_lib 18115 2 snd_wavefront,snd_cs4236
    agpgart 22159 1 nvidia
    i2c_nforce2 4456 0
    forcedeth 50249 0
    snd_mpu401_uart 4943 3 snd_wavefront,snd_mpu401,snd_cs4236
    floppy 49063 0
    pcmcia_core 10241 1 pcmcia
    i2c_core 16845 2 i2c_nforce2,nvidia
    ac97_bus 874 1 snd_ac97_codec
    snd_rawmidi 15014 2 snd_mpu401_uart,snd_wavefront
    skge 34779 0
    evdev 7310 6
    snd_pcm 60499 4 snd_wss_lib,snd_ac97_codec,snd_cs4236,snd_intel8x0
    snd_opl3_lib 7218 2 snd_wavefront,snd_cs4236
    snd_page_alloc 5901 3 snd_pcm,snd_wss_lib,snd_intel8x0
    snd_hwdep 4970 2 snd_opl3_lib,snd_wavefront
    snd_seq_device 4316 2 snd_opl3_lib,snd_rawmidi
    snd_timer 15158 3 snd_opl3_lib,snd_pcm,snd_wss_lib
    firewire_ohci 27283 0
    snd 45013 17 snd_timer,snd_seq_device,snd_hwdep,snd_opl3_lib,snd_pcm,snd_rawmidi,snd_mpu401_uart,snd_wss_lib,snd_ac97_codec,snd_wavefront,snd_mpu401,snd_cs4236,snd_intel8x0
    firewire_core 44257 1 firewire_ohci
    soundcore 4986 1 snd
    ppdev 4750 0
    serio_raw 3709 0
    pcspkr 1423 0
    parport_pc 26601 0
    parport 26479 2 parport_pc,ppdev
    k8temp 2583 0
    ns558 1831 0
    processor 23476 0
    fan 1902 0
    gameport 6680 2 ns558
    joydev 7663 0
    asus_atk0110 8888 0
    crc_itu_t 1095 1 firewire_core
    button 3614 0
    thermal 6563 0
    ext4 384668 3
    crc16 1091 1 ext4
    jbd2 60590 1 ext4
    mbcache 4345 1 ext4
    hid_logitech 14128 0
    ff_memless 3806 1 hid_logitech
    sr_mod 13148 0
    cdrom 30504 1 sr_mod
    usbhid 31477 1 hid_logitech
    hid 66633 2 usbhid,hid_logitech
    sd_mod 25867 5
    pata_acpi 2388 0
    sata_sil 6200 4
    pata_amd 8155 0
    ata_generic 2391 0
    sata_nv 17444 0
    ohci_hcd 19120 0
    ehci_hcd 38640 0
    libata 145743 5 sata_nv,ata_generic,pata_amd,sata_sil,pata_acpi
    scsi_mod 112765 3 libata,sd_mod,sr_mod
    usbcore 122751 4 ehci_hcd,ohci_hcd,usbhid
    usb_common 622 1 usbcore
    dmesg output:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.3.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue May 8 05:10:33 UTC 2012
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
    [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
    [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.3 present.
    [ 0.000000] DMI: Magnell System name/A8N-SLI DELUXE, BIOS ASUS A8N-SLI DELUXE ACPI BIOS Revision 1002 11/26/2004
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-C7FFF write-protect
    [ 0.000000] C8000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
    [ 0.000000] 1 disabled
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00f5ad0] f5ad0
    [ 0.000000] initial memory mapped : 0 - 00c00000
    [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
    [ 0.000000] RAMDISK: 3fd18000 - 3ffe0000
    [ 0.000000] Allocated new RAMDISK: 37536000 - 377fd47f
    [ 0.000000] Move RAMDISK from 000000003fd18000 - 000000003ffdf47e to 37536000 - 377fd47e
    [ 0.000000] ACPI: RSDP 000f7cc0 00014 (v00 Nvidia)
    [ 0.000000] ACPI: RSDT 3fff3000 00030 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: FACP 3fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: DSDT 3fff30c0 062CE (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
    [ 0.000000] ACPI: FACS 3fff0000 00040
    [ 0.000000] ACPI: MCFG 3fff9440 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: APIC 3fff93c0 0006E (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 135MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0003fff0
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x0003fff0
    [ 0.000000] On node 0 totalpages: 262014
    [ 0.000000] free_area_init_node: node 0, pgdat c060c580, node_mem_map f6d35200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3950 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 272 pages used for memmap
    [ 0.000000] HighMem zone: 34530 pages, LIFO batch:7
    [ 0.000000] Using APIC driver default
    [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
    [ 0.000000] If you got timer trouble try acpi_use_timer_override
    [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] ACPI: IRQ14 used by override.
    [ 0.000000] ACPI: IRQ15 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6800000 s30848 r0 d22400 u4194304
    [ 0.000000] pcpu-alloc: s30848 r0 d22400 u4194304 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259966
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/0f476df3-b4ef-47c6-910c-e31b7d180cfc ro
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 2096896 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0)
    [ 0.000000] Memory: 1027408k/1048512k available (3774k kernel code, 20648k reserved, 1434k data, 520k init, 139208k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc0617000 - 0xc0699000 ( 520 kB)
    [ 0.000000] .data : 0xc04af8a9 - 0xc0616400 (1434 kB)
    [ 0.000000] .text : 0xc0100000 - 0xc04af8a9 (3774 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304 nr_irqs:256 16
    [ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 2211.336 MHz processor.
    [ 0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 4424.95 BogoMIPS (lpj=7371120)
    [ 0.006674] pid_max: default: 32768 minimum: 301
    [ 0.006704] Security Framework initialized
    [ 0.006709] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006734] Mount-cache hash table entries: 512
    [ 0.006880] Initializing cgroup subsys cpuacct
    [ 0.006883] Initializing cgroup subsys memory
    [ 0.006893] Initializing cgroup subsys devices
    [ 0.006897] Initializing cgroup subsys freezer
    [ 0.006900] Initializing cgroup subsys net_cls
    [ 0.006903] Initializing cgroup subsys blkio
    [ 0.006929] mce: CPU supports 5 MCE banks
    [ 0.007008] SMP alternatives: switching to UP code
    [ 0.013215] Freeing SMP alternatives: 16k freed
    [ 0.013228] ACPI: Core revision 20120111
    [ 0.018138] ftrace: allocating 16619 entries in 33 pages
    [ 0.023395] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.023703] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
    [ 0.057240] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 00
    [ 0.059996] Performance Events: AMD PMU driver.
    [ 0.059996] ... version: 0
    [ 0.059996] ... bit width: 48
    [ 0.059996] ... generic registers: 4
    [ 0.059996] ... value mask: 0000ffffffffffff
    [ 0.059996] ... max period: 00007fffffffffff
    [ 0.059996] ... fixed-purpose events: 0
    [ 0.059996] ... event mask: 000000000000000f
    [ 0.076766] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.083331] Brought up 1 CPUs
    [ 0.083334] Total of 1 processors activated (4424.95 BogoMIPS).
    [ 0.083805] devtmpfs: initialized
    [ 0.083951] PM: Registering ACPI NVS region at 3fff0000 (12288 bytes)
    [ 0.084999] NET: Registered protocol family 16
    [ 0.085101] node 0 link 0: io port [1000, fffff]
    [ 0.085104] TOM: 0000000040000000 aka 1024M
    [ 0.085107] node 0 link 0: mmio [e0000000, ef00ffff]
    [ 0.085111] node 0 link 0: mmio [a0000, bffff]
    [ 0.085114] node 0 link 0: mmio [40000000, fed3ffff]
    [ 0.085116] TOM2: 0000000000000000 aka 0M
    [ 0.085119] bus: [00, ff] on node 0 link 0
    [ 0.085121] bus: 00 index 0 [io 0x0000-0xffff]
    [ 0.085124] bus: 00 index 1 [mem 0x40000000-0xffffffff]
    [ 0.085126] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
    [ 0.085153] ACPI: bus type pci registered
    [ 0.085216] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.085220] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.085222] PCI: Using MMCONFIG for extended config space
    [ 0.085224] PCI: Using configuration type 1 for base access
    [ 0.085812] bio: create slab <bio-0> at 0
    [ 0.085870] ACPI: Added _OSI(Module Device)
    [ 0.085873] ACPI: Added _OSI(Processor Device)
    [ 0.085875] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.085877] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.086779] ACPI: EC: Look up EC in DSDT
    [ 0.087811] ACPI: Actual Package length (5) is larger than NumElements field (4), truncated
    [ 0.087815]
    [ 0.090599] ACPI: Interpreter enabled
    [ 0.090605] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.090625] ACPI: Using IOAPIC for interrupt routing
    [ 0.095876] ACPI: No dock devices found.
    [ 0.095882] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.095930] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.095989] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.095992] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.095995] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.095998] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
    [ 0.096001] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
    [ 0.096004] PCI: root bus 00: hardware-probed resources
    [ 0.096044] PCI host bridge to bus 0000:00
    [ 0.096047] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.096050] pci_bus 0000:00: root bus resource [mem 0x40000000-0xffffffff]
    [ 0.096053] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.096066] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580
    [ 0.096132] pci 0000:00:01.0: [10de:0050] type 0 class 0x000601
    [ 0.096151] HPET not enabled in BIOS. You might try hpet=force boot option
    [ 0.096162] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05
    [ 0.096170] pci 0000:00:01.1: reg 10: [io 0xe400-0xe41f]
    [ 0.096181] pci 0000:00:01.1: reg 20: [io 0x4c00-0x4c3f]
    [ 0.096186] pci 0000:00:01.1: reg 24: [io 0x4c40-0x4c7f]
    [ 0.096200] pci 0000:00:01.1: PME# supported from D3hot D3cold
    [ 0.096215] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03
    [ 0.096223] pci 0000:00:02.0: reg 10: [mem 0xd5004000-0xd5004fff]
    [ 0.096247] pci 0000:00:02.0: supports D1 D2
    [ 0.096249] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.096261] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03
    [ 0.096269] pci 0000:00:02.1: reg 10: [mem 0xd5005000-0xd50050ff]
    [ 0.096299] pci 0000:00:02.1: supports D1 D2
    [ 0.096301] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.096319] pci 0000:00:04.0: [10de:0059] type 0 class 0x000401
    [ 0.096326] pci 0000:00:04.0: reg 10: [io 0xdc00-0xdcff]
    [ 0.096331] pci 0000:00:04.0: reg 14: [io 0xe000-0xe0ff]
    [ 0.096336] pci 0000:00:04.0: reg 18: [mem 0xd5003000-0xd5003fff]
    [ 0.096357] pci 0000:00:04.0: supports D1 D2
    [ 0.096367] pci 0000:00:06.0: [10de:0053] type 0 class 0x000101
    [ 0.096383] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
    [ 0.096406] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101
    [ 0.096413] pci 0000:00:07.0: reg 10: [io 0x09f0-0x09f7]
    [ 0.096418] pci 0000:00:07.0: reg 14: [io 0x0bf0-0x0bf3]
    [ 0.096423] pci 0000:00:07.0: reg 18: [io 0x0970-0x0977]
    [ 0.096427] pci 0000:00:07.0: reg 1c: [io 0x0b70-0x0b73]
    [ 0.096432] pci 0000:00:07.0: reg 20: [io 0xd800-0xd80f]
    [ 0.096437] pci 0000:00:07.0: reg 24: [mem 0xd5002000-0xd5002fff]
    [ 0.096457] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101
    [ 0.096464] pci 0000:00:08.0: reg 10: [io 0x09e0-0x09e7]
    [ 0.096469] pci 0000:00:08.0: reg 14: [io 0x0be0-0x0be3]
    [ 0.096474] pci 0000:00:08.0: reg 18: [io 0x0960-0x0967]
    [ 0.096479] pci 0000:00:08.0: reg 1c: [io 0x0b60-0x0b63]
    [ 0.096484] pci 0000:00:08.0: reg 20: [io 0xc400-0xc40f]
    [ 0.096489] pci 0000:00:08.0: reg 24: [mem 0xd5001000-0xd5001fff]
    [ 0.096508] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604
    [ 0.096525] pci 0000:00:0a.0: [10de:0057] type 0 class 0x000680
    [ 0.096533] pci 0000:00:0a.0: reg 10: [mem 0xd5000000-0xd5000fff]
    [ 0.096538] pci 0000:00:0a.0: reg 14: [io 0xb000-0xb007]
    [ 0.096561] pci 0000:00:0a.0: supports D1 D2
    [ 0.096563] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.096575] pci 0000:00:0b.0: [10de:005d] type 1 class 0x000604
    [ 0.096603] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.096617] pci 0000:00:0c.0: [10de:005d] type 1 class 0x000604
    [ 0.096643] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.096658] pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604
    [ 0.096688] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.096702] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604
    [ 0.096727] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.096744] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
    [ 0.096764] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
    [ 0.096780] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
    [ 0.096795] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
    [ 0.096829] pci 0000:05:07.0: [14e4:4325] type 0 class 0x000280
    [ 0.096838] pci 0000:05:07.0: reg 10: [mem 0xd4008000-0xd4009fff]
    [ 0.096879] pci 0000:05:0a.0: [1095:3114] type 0 class 0x000104
    [ 0.096890] pci 0000:05:0a.0: reg 10: [io 0x9000-0x9007]
    [ 0.096897] pci 0000:05:0a.0: reg 14: [io 0x9400-0x9403]
    [ 0.096904] pci 0000:05:0a.0: reg 18: [io 0x9800-0x9807]
    [ 0.096911] pci 0000:05:0a.0: reg 1c: [io 0x9c00-0x9c03]
    [ 0.096918] pci 0000:05:0a.0: reg 20: [io 0xa000-0xa00f]
    [ 0.096924] pci 0000:05:0a.0: reg 24: [mem 0xd400a000-0xd400a3ff]
    [ 0.096932] pci 0000:05:0a.0: reg 30: [mem 0x00000000-0x0007ffff pref]
    [ 0.096948] pci 0000:05:0a.0: supports D1 D2
    [ 0.096962] pci 0000:05:0b.0: [104c:8023] type 0 class 0x000c00
    [ 0.096973] pci 0000:05:0b.0: reg 10: [mem 0xd400b000-0xd400b7ff]
    [ 0.096981] pci 0000:05:0b.0: reg 14: [mem 0xd4000000-0xd4003fff]
    [ 0.097022] pci 0000:05:0b.0: supports D1 D2
    [ 0.097024] pci 0000:05:0b.0: PME# supported from D0 D1 D2 D3hot
    [ 0.097040] pci 0000:05:0c.0: [11ab:4320] type 0 class 0x000200
    [ 0.097052] pci 0000:05:0c.0: reg 10: [mem 0xd4004000-0xd4007fff]
    [ 0.097059] pci 0000:05:0c.0: reg 14: [io 0xa400-0xa4ff]
    [ 0.097084] pci 0000:05:0c.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.097107] pci 0000:05:0c.0: supports D1 D2
    [ 0.097109] pci 0000:05:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.097130] pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode)
    [ 0.097134] pci 0000:00:09.0: bridge window [io 0x9000-0xafff]
    [ 0.097137] pci 0000:00:09.0: bridge window [mem 0xd3000000-0xd4ffffff]
    [ 0.097141] pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.097144] pci 0000:00:09.0: bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
    [ 0.097147] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.097166] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
    [ 0.097188] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
    [ 0.097210] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
    [ 0.097240] pci 0000:01:00.0: [10de:00f9] type 0 class 0x000300
    [ 0.097251] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd0ffffff]
    [ 0.097260] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff pref]
    [ 0.097269] pci 0000:01:00.0: reg 18: [mem 0xd1000000-0xd1ffffff]
    [ 0.097295] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.097328] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.097335] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
    [ 0.097340] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd2ffffff]
    [ 0.097344] pci 0000:00:0e.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.097353] pci_bus 0000:00: on NUMA node 0
    [ 0.097356] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.097491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    [ 0.097660] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.097663] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.097665] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.127307] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.127351] ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15)
    [ 0.127398] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    [ 0.127442] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    [ 0.127483] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.127524] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.127566] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.127609] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    [ 0.127654] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 *12 14 15)
    [ 0.127696] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.127738] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.127780] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.127821] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.127869] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 *12 14 15)
    [ 0.127920] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    [ 0.127969] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.128000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
    [ 0.128028] ACPI: PCI Interrupt Link [APC2] (IRQs *17)
    [ 0.128055] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
    [ 0.128082] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
    [ 0.128108] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
    [ 0.128165] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
    [ 0.128221] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
    [ 0.128278] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
    [ 0.128333] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
    [ 0.128389] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
    [ 0.128444] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
    [ 0.128500] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
    [ 0.128559] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
    [ 0.128619] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
    [ 0.128680] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
    [ 0.128739] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
    [ 0.128845] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.128848] vgaarb: loaded
    [ 0.128850] vgaarb: bridge control possible 0000:01:00.0
    [ 0.128906] PCI: Using ACPI for IRQ routing
    [ 0.133715] PCI: pci_cache_line_size set to 64 bytes
    [ 0.133765] reserve RAM buffer: 000000000009e400 - 000000000009ffff
    [ 0.133768] reserve RAM buffer: 000000003fff0000 - 000000003fffffff
    [ 0.133884] NetLabel: Initializing
    [ 0.133886] NetLabel: domain hash size = 128
    [ 0.133887] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.133902] NetLabel: unlabeled traffic allowed by default
    [ 0.140087] pnp: PnP ACPI init
    [ 0.140107] ACPI: bus type pnp registered
    [ 0.140135] pnp 00:00: [io 0x4000-0x407f]
    [ 0.140137] pnp 00:00: [io 0x4080-0x40ff]
    [ 0.140139] pnp 00:00: [io 0x4400-0x447f]
    [ 0.140142] pnp 00:00: [io 0x4480-0x44ff]
    [ 0.140144] pnp 00:00: [io 0x4800-0x487f]
    [ 0.140146] pnp 00:00: [io 0x4880-0x48ff]
    [ 0.140205] system 00:00: [io 0x4000-0x407f] has been reserved
    [ 0.140208] system 00:00: [io 0x4080-0x40ff] has been reserved
    [ 0.140211] system 00:00: [io 0x4400-0x447f] has been reserved
    [ 0.140214] system 00:00: [io 0x4480-0x44ff] has been reserved
    [ 0.140217] system 00:00: [io 0x4800-0x487f] has been reserved
    [ 0.140220] system 00:00: [io 0x4880-0x48ff] has been reserved
    [ 0.140224] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.140304] pnp 00:01: [bus 00-ff]
    [ 0.140307] pnp 00:01: [io 0x0cf8-0x0cff]
    [ 0.140309] pnp 00:01: [io 0x0000-0x0cf7 window]
    [ 0.140312] pnp 00:01: [io 0x0d00-0xffff window]
    [ 0.140315] pnp 00:01: [mem 0x000a0000-0x000bffff window]
    [ 0.140317] pnp 00:01: [mem 0x000c0000-0x000dffff window]
    [ 0.140320] pnp 00:01: [mem 0x40000000-0xfebfffff window]
    [ 0.140371] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.140823] pnp 00:02: [io 0x0010-0x001f]
    [ 0.140826] pnp 00:02: [io 0x0022-0x003f]
    [ 0.140828] pnp 00:02: [io 0x0044-0x005f]
    [ 0.140830] pnp 00:02: [io 0x0062-0x0063]
    [ 0.140832] pnp 00:02: [io 0x0065-0x006f]
    [ 0.140834] pnp 00:02: [io 0x0074-0x007f]
    [ 0.140836] pnp 00:02: [io 0x0091-0x0093]
    [ 0.140838] pnp 00:02: [io 0x00a2-0x00bf]
    [ 0.140841] pnp 00:02: [io 0x00e0-0x00ef]
    [ 0.140843] pnp 00:02: [io 0x04d0-0x04d1]
    [ 0.140845] pnp 00:02: [io 0x0800-0x0805]
    [ 0.140847] pnp 00:02: [io 0x0290-0x0297]
    [ 0.140906] system 00:02: [io 0x04d0-0x04d1] has been reserved
    [ 0.140909] system 00:02: [io 0x0800-0x0805] has been reserved
    [ 0.140912] system 00:02: [io 0x0290-0x0297] has been reserved
    [ 0.140915] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.140927] pnp 00:03: [dma 4]
    [ 0.140929] pnp 00:03: [io 0x0000-0x000f]
    [ 0.140932] pnp 00:03: [io 0x0080-0x0090]
    [ 0.140934] pnp 00:03: [io 0x0094-0x009f]
    [ 0.140936] pnp 00:03: [io 0x00c0-0x00df]
    [ 0.140974] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.140985] pnp 00:04: [io 0x0070-0x0073]
    [ 0.140995] pnp 00:04: [irq 8]
    [ 0.141031] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.141041] pnp 00:05: [io 0x0061]
    [ 0.141076] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.141085] pnp 00:06: [io 0x00f0-0x00ff]
    [ 0.141090] pnp 00:06: [irq 13]
    [ 0.141129] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.141262] pnp 00:07: [io 0x03f0-0x03f5]
    [ 0.141265] pnp 00:07: [io 0x03f7]
    [ 0.141269] pnp 00:07: [irq 6]
    [ 0.141271] pnp 00:07: [dma 2]
    [ 0.141320] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
    [ 0.141497] pnp 00:08: [io 0x03f8-0x03ff]
    [ 0.141502] pnp 00:08: [irq 4]
    [ 0.141574] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.141956] pnp 00:09: [io 0x0378-0x037f]
    [ 0.141958] pnp 00:09: [io 0x0778-0x077b]
    [ 0.141963] pnp 00:09: [irq 7]
    [ 0.141965] pnp 00:09: [dma 3]
    [ 0.142032] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 0.142245] pnp 00:0a: [io 0x0330-0x0331]
    [ 0.142249] pnp 00:0a: [irq 10]
    [ 0.142302] pnp 00:0a: Plug and Play ACPI device, IDs PNPb006 (active)
    [ 0.142465] pnp 00:0b: [io 0x0201]
    [ 0.142513] pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active)
    [ 0.142530] pnp 00:0c: [mem 0xe0000000-0xefffffff]
    [ 0.142585] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.142588] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.142682] pnp 00:0d: [mem 0x000d9000-0x000dbfff]
    [ 0.142684] pnp 00:0d: [mem 0x000f0000-0x000f7fff]
    [ 0.142687] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
    [ 0.142689] pnp 00:0d: [mem 0x000fc000-0x000fffff]
    [ 0.142691] pnp 00:0d: [mem 0x3fff0000-0x3fffffff]
    [ 0.142694] pnp 00:0d: [mem 0xffff0000-0xffffffff]
    [ 0.142696] pnp 00:0d: [mem 0x00000000-0x0009ffff]
    [ 0.142698] pnp 00:0d: [mem 0x00100000-0x3ffeffff]
    [ 0.142701] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
    [ 0.142703] pnp 00:0d: [mem 0xfee00000-0xfeefffff]
    [ 0.142705] pnp 00:0d: [mem 0xfefff000-0xfeffffff]
    [ 0.142707] pnp 00:0d: [mem 0xfff80000-0xfff80fff]
    [ 0.142710] pnp 00:0d: [mem 0xfff90000-0xfffbffff]
    [ 0.142712] pnp 00:0d: [mem 0xfffed000-0xfffeffff]
    [ 0.142780] system 00:0d: [mem 0x000d9000-0x000dbfff] has been reserved
    [ 0.142783] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
    [ 0.142786] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
    [ 0.142789] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
    [ 0.142792] system 00:0d: [mem 0x3fff0000-0x3fffffff] could not be reserved
    [ 0.142796] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
    [ 0.142799] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.142802] system 00:0d: [mem 0x00100000-0x3ffeffff] could not be reserved
    [ 0.142805] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.142808] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
    [ 0.142812] system 00:0d: [mem 0xfefff000-0xfeffffff] could not be reserved
    [ 0.142815] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
    [ 0.142818] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
    [ 0.142821] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
    [ 0.142825] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.142834] pnp: PnP ACPI: found 14 devices
    [ 0.142836] ACPI: ACPI bus type pnp unregistered
    [ 0.179268] Switching to clocksource acpi_pm
    [ 0.179290] PCI: max bus depth: 1 pci_try_num: 2
    [ 0.179311] pci 0000:00:09.0: BAR 15: assigned [mem 0x40000000-0x400fffff pref]
    [ 0.179316] pci 0000:05:0a.0: BAR 6: assigned [mem 0x40000000-0x4007ffff pref]
    [ 0.179319] pci 0000:05:0c.0: BAR 6: assigned [mem 0x40080000-0x4009ffff pref]
    [ 0.179323] pci 0000:00:09.0: PCI bridge to [bus 05-05]
    [ 0.179326] pci 0000:00:09.0: bridge window [io 0x9000-0xafff]
    [ 0.179329] pci 0000:00:09.0: bridge window [mem 0xd3000000-0xd4ffffff]
    [ 0.179333] pci 0000:00:09.0: bridge window [mem 0x40000000-0x400fffff pref]
    [ 0.179337] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
    [ 0.179342] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
    [ 0.179347] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
    [ 0.179353] pci 0000:01:00.0: BAR 6: assigned [mem 0xd2000000-0xd201ffff pref]
    [ 0.179356] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
    [ 0.179359] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd2ffffff]
    [ 0.179363] pci 0000:00:0e.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.179371] pci 0000:00:09.0: setting latency timer to 64
    [ 0.179381] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.179383] pci_bus 0000:00: resource 5 [mem 0x40000000-0xffffffff]
    [ 0.179386] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.179389] pci_bus 0000:05: resource 0 [io 0x9000-0xafff]
    [ 0.179392] pci_bus 0000:05: resource 1 [mem 0xd3000000-0xd4ffffff]
    [ 0.179395] pci_bus 0000:05: resource 2 [mem 0x40000000-0x400fffff pref]
    [ 0.179398] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
    [ 0.179400] pci_bus 0000:05: resource 5 [mem 0x40000000-0xffffffff]
    [ 0.179403] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.179407] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd2ffffff]
    [ 0.179409] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.179448] NET: Registered protocol family 2
    [ 0.179507] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.179755] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.179755] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.179755] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.179755] TCP reno registered
    [ 0.179755] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.179755] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.179755] NET: Registered protocol family 1
    [ 0.179755] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
    [ 0.246787] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
    [ 0.246848] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.246854] pci 0000:00:0b.0: Found disabled HT MSI Mapping
    [ 0.246861] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.246866] pci 0000:00:0b.0: Linking AER extended capability
    [ 0.246900] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.246906] pci 0000:00:0c.0: Found disabled HT MSI Mapping
    [ 0.246913] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.246916] pci 0000:00:0c.0: Linking AER extended capability
    [ 0.246953] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.246959] pci 0000:00:0d.0: Found disabled HT MSI Mapping
    [ 0.246966] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.246969] pci 0000:00:0d.0: Linking AER extended capability
    [ 0.247010] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.247015] pci 0000:00:0e.0: Found disabled HT MSI Mapping
    [ 0.247022] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.247025] pci 0000:00:0e.0: Linking AER extended capability
    [ 0.247045] pci 0000:01:00.0: Boot video device
    [ 0.247048] PCI: CLS 32 bytes, default 64
    [ 0.247104] Unpacking initramfs...
    [ 0.317791] Freeing initrd memory: 2848k freed
    [ 0.319628] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    [ 0.319631] apm: overridden by ACPI.
    [ 0.319848] audit: initializing netlink socket (disabled)
    [ 0.319861] type=2000 audit(1338126992.316:1): initialized
    [ 0.320176] highmem bounce pool size: 64 pages
    [ 0.320181] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.322161] VFS: Disk quotas dquot_6.5.2
    [ 0.322222] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.322310] msgmni has been set to 1740
    [ 0.322474] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.322510] io scheduler noop registered
    [ 0.322512] io scheduler deadline registered
    [ 0.322518] io scheduler cfq registered (default)
    [ 0.322633] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
    [ 0.322689] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
    [ 0.322745] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
    [ 0.322794] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
    [ 0.322982] GHES: HEST is not enabled!
    [ 0.322995] isapnp: Scanning for PnP cards...
    [ 0.678365] isapnp: No Plug & Play device found
    [ 0.678420] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.698839] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.719501] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.719786] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.970407] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.970501] mousedev: PS/2 mouse device common for all mice
    [ 0.970574] rtc_cmos 00:04: RTC can wake from S4
    [ 0.970673] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 0.970693] rtc0: alarms up to one year, y3k, 242 bytes nvram
    [ 0.970715] cpuidle: using governor ladder
    [ 0.970717] cpuidle: using governor menu
    [ 0.970929] TCP cubic registered
    [ 0.971059] NET: Registered protocol family 10
    [ 0.971516] NET: Registered protocol family 17
    [ 0.971522] Registering the dns_resolver key type
    [ 0.971541] Using IPI No-Shortcut mode
    [ 0.971626] PM: Hibernation image not present or could not be loaded.
    [ 0.971635] registered taskstats version 1
    [ 0.971980] rtc_cmos 00:04: setting system clock to 2012-05-27 13:56:33 UTC (1338126993)
    [ 0.972030] Initializing network drop monitor service
    [ 0.972083] Freeing unused kernel memory: 520k freed
    [ 0.972380] Write protecting the kernel text: 3776k
    [ 0.972401] Write protecting the kernel read-only data: 1112k
    [ 0.983214] udevd[32]: starting version 182
    [ 1.036424] usbcore: registered new interface driver usbfs
    [ 1.036449] usbcore: registered new interface driver hub
    [ 1.040374] SCSI subsystem initialized
    [ 1.041939] usbcore: registered new device driver usb
    [ 1.042240] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.042288] ehci_hcd 0000:00:02.1: setting latency timer to 64
    [ 1.042292] ehci_hcd 0000:00:02.1: EHCI Host Controller
    [ 1.042319] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
    [ 1.042343] ehci_hcd 0000:00:02.1: debug port 1
    [ 1.042349] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
    [ 1.042367] ehci_hcd 0000:00:02.1: irq 22, io mem 0xd5005000
    [ 1.043072] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 1.046296] libata version 3.00 loaded.
    [ 1.048421] sata_sil 0000:05:0a.0: version 2.4
    [ 1.048533] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
    [ 1.048566] sata_sil 0000:05:0a.0: Applying R_ERR on DMA activate FIS errata fix
    [ 1.050034] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
    [ 1.050191] hub 1-0:1.0: USB hub found
    [ 1.050196] hub 1-0:1.0: 10 ports detected
    [ 1.050413] ohci_hcd 0000:00:02.0: setting latency timer to 64
    [ 1.050416] ohci_hcd 0000:00:02.0: OHCI Host Controller
    [ 1.050426] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    [ 1.050448] ohci_hcd 0000:00:02.0: irq 23, io mem 0xd5004000
    [ 1.052061] scsi0 : sata_sil
    [ 1.055247] scsi1 : sata_sil
    [ 1.058388] scsi2 : sata_sil
    [ 1.061600] scsi3 : sata_sil
    [ 1.061664] ata1: SATA max UDMA/100 mmio m1024@0xd400a000 tf 0xd400a080 irq 19
    [ 1.061668] ata2: SATA max UDMA/100 mmio m1024@0xd400a000 tf 0xd400a0c0 irq 19
    [ 1.061671] ata3: SATA max UDMA/100 mmio m1024@0xd400a000 tf 0xd400a280 irq 19
    [ 1.061675] ata4: SATA max UDMA/100 mmio m1024@0xd400a000 tf 0xd400a2c0 irq 19
    [ 1.105505] hub 2-0:1.0: USB hub found
    [ 1.105512] hub 2-0:1.0: 10 ports detected
    [ 1.105590] sata_nv 0000:00:07.0: version 3.5
    [ 1.105767] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
    [ 1.105822] sata_nv 0000:00:07.0: setting latency timer to 64
    [ 1.106449] scsi4 : sata_nv
    [ 1.106566] scsi5 : sata_nv
    [ 1.106702] ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 21
    [ 1.106706] ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 21
    [ 1.106854] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
    [ 1.106899] sata_nv 0000:00:08.0: setting latency timer to 64
    [ 1.107330] scsi6 : sata_nv
    [ 1.107449] scsi7 : sata_nv
    [ 1.107557] ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 20
    [ 1.107560] ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 20
    [ 1.107616] pata_amd 0000:00:06.0: version 0.4.1
    [ 1.107645] pata_amd 0000:00:06.0: setting latency timer to 64
    [ 1.108469] scsi8 : pata_amd
    [ 1.108594] scsi9 : pata_amd
    [ 1.109000] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [ 1.109003] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [ 1.330027] Refined TSC clocksource calibration: 2211.331 MHz.
    [ 1.330032] Switching to clocksource tsc
    [ 1.373866] ata9.00: ATAPI: SONY DVD-ROM DDU1613, 9YS2, max UDMA/33
    [ 1.373872] ata9.01: ATAPI: SONY DVD RW DW-D22A, BYS2, max UDMA/66
    [ 1.373879] ata9: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c50000) ACPI=0x701f (60:30:0x1f)
    [ 1.373884] ata9: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc0c50000) ACPI=0x1f01f (60:30:0x1f)
    [ 1.374258] ata9.00: configured for UDMA/33
    [ 1.383354] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 1.386828] ata9.01: configured for UDMA/66
    [ 1.397081] ata1.00: ATA-6: HDS722525VLSA80, V36OA6MA, max UDMA/100
    [ 1.397084] ata1.00: 488397168 sectors, multi 16: LBA48
    [ 1.417086] ata1.00: configured for UDMA/100
    [ 1.417191] scsi 0:0:0:0: Direct-Access ATA HDS722525VLSA80 V36O PQ: 0 ANSI: 5
    [ 1.420013] ata7: SATA link down (SStatus 0 SControl 300)
    [ 1.420027] ata5: SATA link down (SStatus 0 SControl 300)
    [ 1.736680] ata2: SATA link down (SStatus 0 SControl 310)
    [ 1.743343] usb 2-3: new low-speed USB device number 2 using ohci_hcd
    [ 2.056681] ata3: SATA link down (SStatus 0 SControl 310)
    [ 2.220006] usb 2-4: new full-speed USB device number 3 using ohci_hcd
    [ 2.376680] ata4: SATA link down (SStatus 0 SControl 310)
    [ 2.419383] hub 2-4:1.0: USB hub found
    [ 2.422367] hub 2-4:1.0: 2 ports detected
    [ 2.690007] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.713340] usb 2-10: new low-speed USB device number 4 using ohci_hcd
    [ 3.003340] ata8: SATA link down (SStatus 0 SControl 300)
    [ 3.003821] scsi 8:0:0:0: CD-ROM SONY DVD-ROM DDU1613 9YS2 PQ: 0 ANSI: 5
    [ 3.004807] scsi 8:0:1:0: CD-ROM SONY DVD RW DW-D22A BYS2 PQ: 0 ANSI: 5
    [ 3.192270] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 3.192313] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.192316] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.192335] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.203925] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input0
    [ 3.204011] generic-usb 0003:046D:C063.0001: input,hidraw0: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:02.0-3/input0
    [ 3.204121] usbcore: registered new interface driver usbhid
    [ 3.204123] usbhid: USB HID core driver
    [ 3.206210] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
    [ 3.206215] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.206408] sr 8:0:0:0: Attached scsi CD-ROM sr0
    [ 3.207374] sda: sda1 sda2 sda3 sda4
    [ 3.207725] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.209438] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    [ 3.209644] sr 8:0:1:0: Attached scsi CD-ROM sr1
    [ 3.219118] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.0/input/input1
    [ 3.219720] logitech 0003:046D:C50C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-10/input0
    [ 3.228377] logitech 0003:046D:C50C.0003: fixing up Logitech keyboard report descriptor
    [ 3.231342] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.1/input/input2
    [ 3.232510] logitech 0003:046D:C50C.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-10/input1
    [ 3.668390] usb 2-4.1: new low-speed USB device number 5 using ohci_hcd
    [ 3.790466] input: Logitech Desktop USB stand as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4.1/2-4.1:1.0/input/input3
    [ 3.790664] generic-usb 0003:046D:ABD0.0004: input,hiddev0,hidraw3: USB HID v1.10 Keyboard [Logitech Desktop USB stand] on usb-0000:00:02.0-4.1/input0
    [ 4.738194] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 5.853738] udevd[230]: starting version 182
    [ 6.424070] thermal LNXTHERM:00: registered as thermal_zone0
    [ 6.424074] ACPI: Thermal Zone [THRM] (40 C)
    [ 6.424756] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
    [ 6.424762] ACPI: Power Button [PWRB]
    [ 6.424829] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 6.424833] ACPI: Power Button [PWRF]
    [ 6.531468] ACPI: Fan [FAN] (on)
    [ 6.557938] gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 59659kHz
    [ 6.563497] IT8712 SuperIO detected.
    [ 6.563716] parport_pc 00:09: reported by Plug and Play ACPI
    [ 6.563763] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    [ 6.567244] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 6.607796] ppdev: user-space parallel port driver
    [ 6.624664] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
    [ 6.676743] firewire_ohci: Added fw-ohci device 0000:05:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
    [ 6.677042] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
    [ 6.677091] skge: 1.14 addr 0xd4004000 irq 17 chip Yukon-Lite rev 7
    [ 6.677584] skge 0000:05:0c.0: eth0: addr 00:11:d8:37:b2:f9
    [ 6.699836] Floppy drive(s): fd0 is 1.44M
    [ 6.716478] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
    [ 6.716637] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
    [ 6.716644] forcedeth 0000:00:0a.0: setting latency timer to 64
    [ 6.717736] FDC 0 is a post-1991 82077
    [ 6.749918] Linux agpgart interface v0.103
    [ 7.086279] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x02, vendor 0x4243)
    [ 7.086285] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
    [ 7.086290] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x01, vendor 0x4243)
    [ 7.086294] ssb: Core 3 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
    [ 7.086299] ssb: Core 4 found: PCI (cc 0x804, rev 0x07, vendor 0x4243)
    [ 7.086303] ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
    [ 7.089653] ssb: Sonics Silicon Backplane found on PCI device 0000:05:07.0
    [ 7.126862] cfg80211: Calling CRDA to update world regulatory domain
    [ 7.176776] firewire_core: created device fw0: GUID 0011d8000000678b, S400
    [ 7.240821] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:11:d8:37:a7:42
    [ 7.240826] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
    [ 7.241088] i2c i2c-0: nForce2 SMBus adapter at 0x4c00
    [ 7.241114] i2c i2c-1: nForce2 SMBus adapter at 0x4c40
    [ 7.241405] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
    [ 7.241428] snd_intel8x0 0000:00:04.0: setting latency timer to 64
    [ 7.386441] b43legacy-phy0: Broadcom 4306 WLAN found (core revision 4)
    [ 7.560025] intel8x0_measure_ac97_clock: measured 50564 usecs (2488 samples)
    [ 7.560029] intel8x0: clocking to 46825
    [ 7.622698] nvidia: module license 'NVIDIA' taints kernel.
    [ 7.622702] Disabling lock debugging due to kernel taint
    [ 7.654334] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
    [ 7.654357] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 7.654955] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.49 Mon Apr 30 23:30:07 PDT 2012
    [ 7.657409] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 7.657999] Broadcom 43xx-legacy driver loaded [ Features: PLID ]
    [ 9.880314] EXT4-fs (sda3): re-mounted. Opts: (null)
    [ 9.992201] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 9.993651] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 10.094819] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 10.171043] Adding 4096568k swap on /dev/sda2. Priority:-1 extents:1 across:4096568k
    [ 12.706681] b43legacy-phy0: Loading firmware version 0x127, patch level 14 (2005-04-18 02:36:27)
    [ 12.774910] Registered led device: b43legacy-phy0::tx
    [ 12.775228] Registered led device: b43legacy-phy0::rx
    [ 12.775546] Registered led device: b43legacy-phy0::radio
    [ 12.800241] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 12.807335] skge 0000:05:0c.0: eth0: enabling interface
    [ 12.812861] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 12.818147] forcedeth 0000:00:0a.0: eth1: no link during initialization
    [ 12.818697] ADDRCONF(NETDEV_UP): eth1: link is not ready
    [ 16.030022] wlan0: authenticate with bc:ae:c5:c3:4c:e3 (try 1)
    [ 16.033527] wlan0: authenticated
    [ 16.066683] wlan0: associate with bc:ae:c5:c3:4c:e3 (try 1)
    [ 16.068994] wlan0: RX AssocResp from bc:ae:c5:c3:4c:e3 (capab=0x411 status=0 aid=6)
    [ 16.068997] wlan0: associated
    [ 16.069001] wlan0: moving STA bc:ae:c5:c3:4c:e3 to state 1
    [ 16.069003] wlan0: moving STA bc:ae:c5:c3:4c:e3 to state 2
    [ 16.080313] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 16.157459] Intel AES-NI instructions are not detected.
    [ 16.164801] wlan0: moving STA bc:ae:c5:c3:4c:e3 to state 3
    [ 24.111561] EXT4-fs (sda3): re-mounted. Opts: commit=0
    [ 24.268251] EXT4-fs (sda4): re-mounted. Opts: commit=0
    [ 27.110004] wlan0: no IPv6 routers present
    [ 43.360438] b43legacy-phy0 warning: Unexpected value for chanstat (0x7C00)
    Everything.log snippet (right before freeze #1):
    May 12 12:21:01 localhost -- MARK --
    May 12 12:41:01 localhost -- MARK --
    May 12 13:01:01 localhost /USR/SBIN/CROND[4753]: (root) CMD (run-parts /etc/cron.hourly)
    May 12 13:16:28 localhost kernel: [76481.010966] b43legacy-phy0 warning: Unexpected value for chanstat (0x7C00)
    May 12 13:18:57 localhost kernel: [76629.990174] emerald-theme-m[4784]: segfault at 18 ip b7336935 sp bfada630 error 4 in libgtk-x11-2.0.so.0.2400.10[b728d000+454000]
    May 12 13:19:22 localhost kernel: [76655.367954] emerald-theme-m[4797]: segfault at 18 ip b7328935 sp bf8ecb20 error 4 in libgtk-x11-2.0.so.0.2400.10[b727f000+454000]
    May 12 13:19:37 localhost kernel: [76669.865753] emerald-theme-m[4806]: segfault at 18 ip b7367935 sp bf9c1c70 error 4 in libgtk-x11-2.0.so.0.2400.10[b72be000+454000]
    May 12 13:20:00 localhost kernel: [76692.879466] emerald-theme-m[4815]: segfault at 18 ip b73c0935 sp bfe15100 error 4 in libgtk-x11-2.0.so.0.2400.10[b7317000+454000]
    May 12 13:20:14 localhost kernel: [76707.084110] emerald-theme-m[4824]: segfault at 18 ip b736a935 sp bf983520 error 4 in libgtk-x11-2.0.so.0.2400.10[b72c1000+454000]
    May 12 13:20:14 localhost kernel: [76707.085552] BUG: unable to handle kernel NULL pointer dereference at 00000090
    May 12 13:20:14 localhost kernel: [76707.085558] IP: [<c01f1445>] shmem_find_get_pages_and_swap+0x65/0xf0
    May 12 13:20:14 localhost kernel: [76707.085566] *pde = 00000000
    May 12 13:20:14 localhost kernel: [76707.085570] Oops: 0000 [#1] PREEMPT SMP
    May 12 13:20:14 localhost kernel: [76707.085573] Modules linked in: fuse aes_i586 cryptd aes_generic snd_cs4236 snd_mpu401 nvidia(PO) arc4 b43legacy mac80211 cfg80211 rfkill snd_wavefront snd_intel8x0 snd_wss_lib snd_mpu401_uart snd_ac97_codec snd_rawmidi ac97_bus snd_pcm snd_opl3_lib snd_hwdep snd_page_alloc snd_timer snd_seq_device snd soundcore firewire_ohci ssb ns558 gameport agpgart firewire_core ppdev pcmcia skge mmc_core forcedeth serio_raw processor fan pcspkr i2c_nforce2 parport_pc floppy i2c_core asus_atk0110 button thermal pcmcia_core parport joydev evdev crc_itu_t k8temp ext4 crc16 jbd2 mbcache hid_logitech ff_memless sr_mod cdrom usbhid hid sd_mod pata_acpi sata_sil pata_amd ata_generic sata_nv ohci_hcd ehci_hcd libata scsi_mod usbcore usb_common
    May 12 13:20:14 localhost kernel: [76707.085618]
    May 12 13:20:14 localhost kernel: [76707.085621] Pid: 622, comm: Xorg Tainted: P O 3.3.5-1-ARCH #1 Magnell System name/A8N-SLI DELUXE
    May 12 13:20:14 localhost kernel: [76707.085626] EIP: 0060:[<c01f1445>] EFLAGS: 00013246 CPU: 0
    May 12 13:20:14 localhost kernel: [76707.085629] EIP is at shmem_find_get_pages_and_swap+0x65/0xf0
    May 12 13:20:14 localhost kernel: [76707.085632] EAX: f524387c EBX: 00000002 ECX: 00000001 EDX: 00000080
    May 12 13:20:14 localhost kernel: [76707.085634] ESI: f443fde0 EDI: f443fe28 EBP: f443fda4 ESP: f443fd74
    May 12 13:20:14 localhost kernel: [76707.085637] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
    May 12 13:20:14 localhost kernel: [76707.085640] Process Xorg (pid: 622, ti=f443e000 task=f5b124c0 task.ti=f443e000)
    May 12 13:20:14 localhost kernel: [76707.085642] Stack:
    May 12 13:20:14 localhost kernel: [76707.085643] 0000003e 0000000e 00000001 dca13574 0000000e 0000003e 00000003 00000002
    May 12 13:20:14 localhost kernel: [76707.085649] 00000002 0000003e f443fde0 f443fe58 f443fe64 c01f2d98 f443fe20 f443fde0
    May 12 13:20:14 localhost kernel: [76707.085654] f443fe9c f6f2a180 00000000 dca134a0 00000000 f443fe20 00000000 00000000
    May 12 13:20:14 localhost kernel: [76707.085659] Call Trace:
    May 12 13:20:14 localhost kernel: [76707.085664] [<c01f2d98>] shmem_truncate_range+0xe8/0x4f0
    May 12 13:20:14 localhost kernel: [76707.085668] [<c01f33bc>] shmem_evict_inode+0xac/0x120
    May 12 13:20:14 localhost kernel: [76707.085669] [<c0240e0e>] evict+0x8e/0x170
    May 12 13:20:14 localhost kernel: [76707.085669] [<c02412db>] iput+0xcb/0x1b0
    May 12 13:20:14 localhost kernel: [76707.085669] [<c023de57>] d_kill+0xa7/0xf0
    May 12 13:20:14 localhost kernel: [76707.085669] [<c023e461>] dput+0xc1/0x170
    May 12 13:20:14 localhost kernel: [76707.085669] [<c022b908>] fput+0x128/0x1d0
    May 12 13:20:14 localhost kernel: [76707.085669] [<c0200eab>] remove_vma+0x2b/0x60
    May 12 13:20:14 localhost kernel: [76707.085669] [<c0201e8a>] do_munmap+0x15a/0x2c0
    May 12 13:20:14 localhost kernel: [76707.085669] [<c02906fb>] sys_shmdt+0x9b/0x140
    May 12 13:20:14 localhost kernel: [76707.085669] [<c0290ae3>] sys_ipc+0x223/0x280
    May 12 13:20:14 localhost kernel: [76707.085669] [<c0152ca8>] ? sys_clock_gettime+0x48/0x70
    May 12 13:20:14 localhost kernel: [76707.085669] [<c04ae79f>] sysenter_do_call+0x12/0x28
    May 12 13:20:14 localhost kernel: [76707.085669] Code: 24 e8 70 d7 0e 00 85 c0 89 45 e8 0f 84 8e 00 00 00 8b 7d 08 31 db c7 45 ec 00 00 00 00 90 8b 07 8b 10 85 d2 74 3d f6 c2 03 75 5e <8b> 4a 10 89 5d d8 85 c9 74 61 8d 59 01 89 c8 89 5d f0 3e 0f b1
    May 12 13:20:14 localhost kernel: [76707.085669] EIP: [<c01f1445>] shmem_find_get_pages_and_swap+0x65/0xf0 SS:ESP 0068:f443fd74
    May 12 13:20:14 localhost kernel: [76707.085669] CR2: 0000000000000090
    May 12 13:20:14 localhost kernel: [76707.085769] ---[ end trace 2165add98098eec7 ]---
    May 12 13:20:34 localhost kernel: [76726.967091] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
    May 12 13:20:34 localhost kernel: [76727.311089] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
    May 12 13:20:35 localhost kernel: [76727.543078] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
    May 12 13:20:46 localhost kernel: [76738.927100] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
    May 12 13:20:46 localhost kernel: [76739.191099] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
    May 12 13:20:46 localhost kernel: [76739.399099] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
    May 12 13:20:47 localhost kernel: [76739.631099] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
    May 12 13:20:47 localhost kernel: [76739.847099] SysRq : HMay 12 13:22:02 localhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
    May 12 13:22:02 localhost kernel: [ 0.000000] Initializing cgroup subsys cpu
    May 12 13:22:02 localhost kernel: [ 0.000000] Linux version 3.3.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue May 8 05:10:33 UTC 2012
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-provided physical RAM map:
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
    May 12 13:22:02 localhost syslog-ng[443]: syslog-ng starting up; version='3.3.5'
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved)
    May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    May 12 13:22:02 localhost kernel: [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    May 12 13:22:02 localhost kernel: [ 0.000000] DMI 2.3 present.
    May 12 13:22:02 localhost kernel: [ 0.000000] DMI: Magnell System name/A8N-SLI DELUXE, BIOS ASUS A8N-SLI DELUXE ACPI BIOS Revision 1002 11/26/2004
    Everything.log #2 (before freeze #2)
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmManager: ending phase EXIT
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): Unreffing manager
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmManager: disposing manager
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: Clearing object store
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: Unreffing object: 0xa09dc18
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: Unreffing object: 0xa09dc90
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: Clearing object store
    May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: Clearing object store
    May 25 14:32:20 localhost gdm-simple-slave[625]: WARNING: Child process 733 was already dead.
    May 25 18:32:22 localhost rtkit-daemon[797]: Successfully made thread 905 of process 905 (/usr/bin/pulseaudio) owned by '1001' high priority at nice level -11.
    May 25 18:32:22 localhost rtkit-daemon[797]: Supervising 4 threads of 2 processes of 2 users.
    May 25 14:32:22 lo

    My thought process was followed similar lines. 
    I have kept track of what has been going when freezes occur and there does not seem to be any pattern to running programs at the time of the crashes.   
    I have let memtest (from the arch installation cd) run for over 10 hours and it does not detect any memory problems.
    I have considered hard drive problems as well.  I ran Steve Gibson's SpinRite software on the hard disk on every level it has including dynastat.  SpinRite can not detect a single problem with the surface of the disk or the way data is read from it. 
    As far as temp goes it does not feel overly hot when the system freezes but I suppose that it is possible.  I am not sure how to set up monitoring for that.  I guess I could find some kind of gui or command line tool that runs in a loop and outputs temp info to a file that I could review after a crash.  I'll try that but my gut says that it is going to be something else. 
    There are seg faults and other messages in the logs and command output that I have attached above that look suspicious to me but unfortunately I don't know enough to make use of them.  Google does not seem to be shedding any light on the situation for me either.  Is there anything in there that should be sticking out at me?
    Thanks for taking the time to read my post and for replying.  Also, thanks in advance to anyone who takes the time to post a follow up.  I appreciate the help.

  • Monitor freezes after grub starts

    Hi,
    I'm with the following problem: when I start my computer, in a few seconds after I choose Arch Linux at the grub menu my monitor shows a lot of garbage that does not allow me to see what is going on with my computer.  So I don't even get the command line after I start my computer
    It's not a problem with my monitor because I can use the arch installation CD to get to the command line.
    I tried to use the second option from the grub menu, arch linux fallback, but I had the exactly same problem.
    I have no clue of how I can even start trying to solve this problem. The only thing that I could think of was to use the installation CD, mount /var/ and get the messages.log file. The file can be downloaded from:
    http://www.megaupload.com/?d=90BUSPQP
    Do you have any idea of how I can solve this problem?
    Thanks!

    Sorry... it didn't come to me that downloading from megaupload would be such a hassle. Thanks George.Harmony for letting me know.
    But the good thing is that the messages from my last boot does not go over the sending limits of this forum:
    Jun 24 13:35:25 myhost kernel: Initializing cgroup subsys cpuset
    Jun 24 13:35:25 myhost kernel: Initializing cgroup subsys cpu
    Jun 24 13:35:25 myhost kernel: Linux version 2.6.34-ARCH (thomas@evey) (gcc version 4.5.0 20100610 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Jun 19 00:07:49 CEST 2010
    Jun 24 13:35:25 myhost kernel: Command line: root=/dev/disk/by-uuid/85509a7d-94c3-49fe-a970-84ba9230c35e ro vga=773
    Jun 24 13:35:25 myhost kernel: BIOS-provided physical RAM map:
    Jun 24 13:35:25 myhost kernel: BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
    Jun 24 13:35:25 myhost kernel: BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
    Jun 24 13:35:25 myhost kernel: BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
    Jun 24 13:35:25 myhost kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    Jun 24 13:35:25 myhost kernel: BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable)
    Jun 24 13:35:25 myhost kernel: BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
    Jun 24 13:35:25 myhost kernel: BIOS-e820: 00000000bf8a7000 - 00000000bf9bb000 (usable)
    Jun 24 13:35:25 myhost kernel: BIOS-e820: 00000000bf9bb000 - 00000000bfa0f000 (reserved)
    Jun 24 13:35:25 myhost kernel: BIOS-e820: 00000000bfa0f000 - 00000000bfb08000 (usable)
    Jun 24 13:35:25 myhost kernel: BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
    Jun 24 13:35:25 myhost kernel: BIOS-e820: 00000000bfd0f000 - 00000000bfd18000 (usable)
    Jun 24 13:35:25 myhost kernel: BIOS-e820: 00000000bfd18000 - 00000000bfd1f000 (reserved)
    Jun 24 13:35:25 myhost kernel: BIOS-e820: 00000000bfd1f000 - 00000000bfd63000 (usable)
    Jun 24 13:35:25 myhost kernel: BIOS-e820: 00000000bfd63000 - 00000000bfd9f000 (ACPI NVS)
    Jun 24 13:35:25 myhost kernel: BIOS-e820: 00000000bfd9f000 - 00000000bfde4000 (usable)
    Jun 24 13:35:25 myhost kernel: BIOS-e820: 00000000bfde4000 - 00000000bfdff000 (ACPI data)
    Jun 24 13:35:25 myhost kernel: BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable)
    Jun 24 13:35:25 myhost kernel: BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    Jun 24 13:35:25 myhost kernel: NX (Execute Disable) protection: active
    Jun 24 13:35:25 myhost kernel: DMI present.
    Jun 24 13:35:25 myhost kernel: No AGP bridge found
    Jun 24 13:35:25 myhost kernel: last_pfn = 0x140000 max_arch_pfn = 0x400000000
    Jun 24 13:35:25 myhost kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Jun 24 13:35:25 myhost kernel: last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
    Jun 24 13:35:25 myhost kernel: Scanning 1 areas for low memory corruption
    Jun 24 13:35:25 myhost kernel: modified physical RAM map:
    Jun 24 13:35:25 myhost kernel: modified: 0000000000000000 - 0000000000010000 (reserved)
    Jun 24 13:35:25 myhost kernel: modified: 0000000000010000 - 000000000009c400 (usable)
    Jun 24 13:35:25 myhost kernel: modified: 000000000009c400 - 00000000000a0000 (reserved)
    Jun 24 13:35:25 myhost kernel: modified: 00000000000d2000 - 00000000000d4000 (reserved)
    Jun 24 13:35:25 myhost kernel: modified: 00000000000e0000 - 0000000000100000 (reserved)
    Jun 24 13:35:25 myhost kernel: modified: 0000000000100000 - 00000000bf8a1000 (usable)
    Jun 24 13:35:25 myhost kernel: modified: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
    Jun 24 13:35:25 myhost kernel: modified: 00000000bf8a7000 - 00000000bf9bb000 (usable)
    Jun 24 13:35:25 myhost kernel: modified: 00000000bf9bb000 - 00000000bfa0f000 (reserved)
    Jun 24 13:35:25 myhost kernel: modified: 00000000bfa0f000 - 00000000bfb08000 (usable)
    Jun 24 13:35:25 myhost kernel: modified: 00000000bfb08000 - 00000000bfd0f000 (reserved)
    Jun 24 13:35:25 myhost kernel: modified: 00000000bfd0f000 - 00000000bfd18000 (usable)
    Jun 24 13:35:25 myhost kernel: modified: 00000000bfd18000 - 00000000bfd1f000 (reserved)
    Jun 24 13:35:25 myhost kernel: modified: 00000000bfd1f000 - 00000000bfd63000 (usable)
    Jun 24 13:35:25 myhost kernel: modified: 00000000bfd63000 - 00000000bfd9f000 (ACPI NVS)
    Jun 24 13:35:25 myhost kernel: modified: 00000000bfd9f000 - 00000000bfde4000 (usable)
    Jun 24 13:35:25 myhost kernel: modified: 00000000bfde4000 - 00000000bfdff000 (ACPI data)
    Jun 24 13:35:25 myhost kernel: modified: 00000000bfdff000 - 00000000bfe00000 (usable)
    Jun 24 13:35:25 myhost kernel: modified: 0000000100000000 - 0000000140000000 (usable)
    Jun 24 13:35:25 myhost kernel: found SMP MP-table at [ffff8800000f79c0] f79c0
    Jun 24 13:35:25 myhost kernel: init_memory_mapping: 0000000000000000-00000000bfe00000
    Jun 24 13:35:25 myhost kernel: init_memory_mapping: 0000000100000000-0000000140000000
    Jun 24 13:35:25 myhost kernel: RAMDISK: 37e59000 - 37ff0000
    Jun 24 13:35:25 myhost kernel: ACPI: RSDP 00000000000f7910 00024 (v02 PTLTD )
    Jun 24 13:35:25 myhost kernel: ACPI: XSDT 00000000bfdf7cd6 00074 (v01 DELL QA09 06040000 LTP 00000000)
    Jun 24 13:35:25 myhost kernel: ACPI: FACP 00000000bfde8000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
    Jun 24 13:35:25 myhost kernel: ACPI: DSDT 00000000bfde9000 06E3C (v02 Intel CANTIGA 06040000 INTL 20050624)
    Jun 24 13:35:25 myhost kernel: ACPI: FACS 00000000bfd9efc0 00040
    Jun 24 13:35:25 myhost kernel: ACPI: HPET 00000000bfdfed16 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    Jun 24 13:35:25 myhost kernel: ACPI: MCFG 00000000bfdfed4e 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    Jun 24 13:35:25 myhost kernel: ACPI: APIC 00000000bfdfed8a 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    Jun 24 13:35:25 myhost kernel: ACPI: BOOT 00000000bfdfedf2 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    Jun 24 13:35:25 myhost kernel: ACPI: SLIC 00000000bfdfee1a 00176 (v01 DELL QA09 06040000 LTP 00000000)
    Jun 24 13:35:25 myhost kernel: ACPI: OSFR 00000000bfdfef90 00070 (v01 DELL DELL 06040000 ASL 00000061)
    Jun 24 13:35:25 myhost kernel: ACPI: SSDT 00000000bfde7000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
    Jun 24 13:35:25 myhost kernel: ACPI: SSDT 00000000bfde6000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
    Jun 24 13:35:25 myhost kernel: ACPI: SSDT 00000000bfde5000 0020F (v01 PmRef ApTst 00003000 INTL 20050624)
    Jun 24 13:35:25 myhost kernel: Zone PFN ranges:
    Jun 24 13:35:25 myhost kernel: DMA 0x00000010 -> 0x00001000
    Jun 24 13:35:25 myhost kernel: DMA32 0x00001000 -> 0x00100000
    Jun 24 13:35:25 myhost kernel: Normal 0x00100000 -> 0x00140000
    Jun 24 13:35:25 myhost kernel: Movable zone start PFN for each node
    Jun 24 13:35:25 myhost kernel: early_node_map[9] active PFN ranges
    Jun 24 13:35:25 myhost kernel: 0: 0x00000010 -> 0x0000009c
    Jun 24 13:35:25 myhost kernel: 0: 0x00000100 -> 0x000bf8a1
    Jun 24 13:35:25 myhost kernel: 0: 0x000bf8a7 -> 0x000bf9bb
    Jun 24 13:35:25 myhost kernel: 0: 0x000bfa0f -> 0x000bfb08
    Jun 24 13:35:25 myhost kernel: 0: 0x000bfd0f -> 0x000bfd18
    Jun 24 13:35:25 myhost kernel: 0: 0x000bfd1f -> 0x000bfd63
    Jun 24 13:35:25 myhost kernel: 0: 0x000bfd9f -> 0x000bfde4
    Jun 24 13:35:25 myhost kernel: 0: 0x000bfdff -> 0x000bfe00
    Jun 24 13:35:25 myhost kernel: 0: 0x00100000 -> 0x00140000
    Jun 24 13:35:25 myhost kernel: ACPI: PM-Timer IO Port: 0x408
    Jun 24 13:35:25 myhost kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Jun 24 13:35:25 myhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Jun 24 13:35:25 myhost kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    Jun 24 13:35:25 myhost kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    Jun 24 13:35:25 myhost kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    Jun 24 13:35:25 myhost kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    Jun 24 13:35:25 myhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    Jun 24 13:35:25 myhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Jun 24 13:35:25 myhost kernel: Using ACPI (MADT) for SMP configuration information
    Jun 24 13:35:25 myhost kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Jun 24 13:35:25 myhost kernel: SMP: Allowing 2 CPUs, 0 hotplug CPUs
    Jun 24 13:35:25 myhost kernel: PM: Registered nosave memory: 000000000009c000 - 000000000009d000
    Jun 24 13:35:25 myhost kernel: PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
    Jun 24 13:35:25 myhost kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    Jun 24 13:35:25 myhost kernel: PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    Jun 24 13:35:25 myhost kernel: PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
    Jun 24 13:35:25 myhost kernel: PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Jun 24 13:35:25 myhost kernel: PM: Registered nosave memory: 00000000bf8a1000 - 00000000bf8a7000
    Jun 24 13:35:25 myhost kernel: PM: Registered nosave memory: 00000000bf9bb000 - 00000000bfa0f000
    Jun 24 13:35:25 myhost kernel: PM: Registered nosave memory: 00000000bfb08000 - 00000000bfd0f000
    Jun 24 13:35:25 myhost kernel: PM: Registered nosave memory: 00000000bfd18000 - 00000000bfd1f000
    Jun 24 13:35:25 myhost kernel: PM: Registered nosave memory: 00000000bfd63000 - 00000000bfd9f000
    Jun 24 13:35:25 myhost kernel: PM: Registered nosave memory: 00000000bfde4000 - 00000000bfdff000
    Jun 24 13:35:25 myhost kernel: PM: Registered nosave memory: 00000000bfe00000 - 0000000100000000
    Jun 24 13:35:25 myhost kernel: Allocating PCI resources starting at bfe00000 (gap: bfe00000:40200000)
    Jun 24 13:35:25 myhost kernel: Booting paravirtualized kernel on bare hardware
    Jun 24 13:35:25 myhost kernel: setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
    Jun 24 13:35:25 myhost kernel: PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88104 r8192 d22488 u1048576
    Jun 24 13:35:25 myhost kernel: pcpu-alloc: s88104 r8192 d22488 u1048576 alloc=1*2097152
    Jun 24 13:35:25 myhost kernel: pcpu-alloc: [0] 0 1
    Jun 24 13:35:25 myhost kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1029325
    Jun 24 13:35:25 myhost kernel: Kernel command line: root=/dev/disk/by-uuid/85509a7d-94c3-49fe-a970-84ba9230c35e ro vga=773
    Jun 24 13:35:25 myhost kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Jun 24 13:35:25 myhost kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Jun 24 13:35:25 myhost kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Jun 24 13:35:25 myhost kernel: xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    Jun 24 13:35:25 myhost kernel: Checking aperture...
    Jun 24 13:35:25 myhost kernel: No AGP bridge found
    Jun 24 13:35:25 myhost kernel: Subtract (70 early reservations)
    Jun 24 13:35:25 myhost kernel: #1 [0001000000 - 00016e1178] TEXT DATA BSS
    Jun 24 13:35:25 myhost kernel: #2 [0037e59000 - 0037ff0000] RAMDISK
    Jun 24 13:35:25 myhost kernel: #3 [00016e2000 - 00016e21d4] BRK
    Jun 24 13:35:25 myhost kernel: #4 [00000f79d0 - 0000100000] BIOS reserved
    Jun 24 13:35:25 myhost kernel: #5 [00000f79c0 - 00000f79d0] MP-table mpf
    Jun 24 13:35:25 myhost kernel: #6 [000009c400 - 000009c971] BIOS reserved
    Jun 24 13:35:25 myhost kernel: #7 [000009cb2d - 00000f79c0] BIOS reserved
    Jun 24 13:35:25 myhost kernel: #8 [000009c971 - 000009cb2d] MP-table mpc
    Jun 24 13:35:25 myhost kernel: #9 [0000010000 - 0000012000] TRAMPOLINE
    Jun 24 13:35:25 myhost kernel: #10 [0000012000 - 0000016000] ACPI WAKEUP
    Jun 24 13:35:25 myhost kernel: #11 [0000016000 - 0000018000] PGTABLE
    Jun 24 13:35:25 myhost kernel: #12 [0000018000 - 0000019000] PGTABLE
    Jun 24 13:35:25 myhost kernel: #13 [00016e2200 - 00016e3200] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #14 [0000019000 - 0000019200] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #15 [0001ee4000 - 0001ee5000] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #16 [0001ee5000 - 0001ee6000] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #17 [0002000000 - 0005800000] MEMMAP 0
    Jun 24 13:35:25 myhost kernel: #18 [00016e3200 - 00016fb200] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #19 [00016fb200 - 0001713200] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #20 [0001713200 - 000172b200] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #21 [000172c000 - 000172d000] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #22 [00016e1180 - 00016e11c1] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #23 [00016e1200 - 00016e1243] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #24 [00016e1280 - 00016e16a8] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #25 [00016e16c0 - 00016e1728] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #26 [00016e1740 - 00016e17a8] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #27 [00016e17c0 - 00016e1828] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #28 [00016e1840 - 00016e18a8] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #29 [00016e18c0 - 00016e1928] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #30 [00016e1940 - 00016e19a8] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #31 [00016e19c0 - 00016e1a28] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #32 [00016e1a40 - 00016e1aa8] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #33 [00016e1ac0 - 00016e1b28] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #34 [00016e1b40 - 00016e1ba8] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #35 [00016e1bc0 - 00016e1c28] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #36 [00016e1c40 - 00016e1ca8] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #37 [00016e1cc0 - 00016e1d28] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #38 [00016e1d40 - 00016e1da8] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #39 [00016e1dc0 - 00016e1e28] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #40 [00016e1e40 - 00016e1ea8] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #41 [00016e1ec0 - 00016e1f28] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #42 [00016e1f40 - 00016e1fa8] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #43 [00016e1fc0 - 00016e1fe0] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #44 [000172b200 - 000172b220] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #45 [000172b240 - 000172b260] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #46 [000172b280 - 000172b2a0] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #47 [000172b2c0 - 000172b2e0] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #48 [000172b300 - 000172b320] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #49 [000172b340 - 000172b360] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #50 [000172b380 - 000172b3a0] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #51 [000172b3c0 - 000172b407] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #52 [000172b440 - 000172b487] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #53 [0001800000 - 000181d000] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #54 [0001900000 - 000191d000] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #55 [000172b4c0 - 000172b4c8] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #56 [000172b500 - 000172b508] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #57 [000172b540 - 000172b548] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #58 [000172b580 - 000172b590] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #59 [000172b5c0 - 000172b700] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #60 [000172b700 - 000172b760] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #61 [000172b780 - 000172b7e0] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #62 [000172d000 - 0001735000] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #63 [000191d000 - 0001d1d000] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #64 [0005800000 - 0005a00000] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #65 [000172b800 - 000172ba40] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #66 [0005a00000 - 0009a00000] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #67 [0001735000 - 0001755000] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #68 [0001755000 - 0001795000] BOOTMEM
    Jun 24 13:35:25 myhost kernel: #69 [000001aa00 - 0000022a00] BOOTMEM
    Jun 24 13:35:25 myhost kernel: Memory: 4050248k/5242880k available (3483k kernel code, 1053900k absent, 138732k reserved, 1796k data, 480k init)
    Jun 24 13:35:25 myhost kernel: SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Jun 24 13:35:25 myhost kernel: Hierarchical RCU implementation.
    Jun 24 13:35:25 myhost kernel: NR_IRQS:768
    Jun 24 13:35:25 myhost kernel: Extended CMOS year: 2000
    Jun 24 13:35:25 myhost kernel: Console: colour dummy device 80x25
    Jun 24 13:35:25 myhost kernel: console [tty0] enabled
    Jun 24 13:35:25 myhost kernel: allocated 41943040 bytes of page_cgroup
    Jun 24 13:35:25 myhost kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Jun 24 13:35:25 myhost kernel: Fast TSC calibration using PIT
    Jun 24 13:35:25 myhost kernel: Detected 2526.938 MHz processor.
    Jun 24 13:35:25 myhost kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.45 BogoMIPS (lpj=8423126)
    Jun 24 13:35:25 myhost kernel: Security Framework initialized
    Jun 24 13:35:25 myhost kernel: Mount-cache hash table entries: 256
    Jun 24 13:35:25 myhost kernel: Initializing cgroup subsys ns
    Jun 24 13:35:25 myhost kernel: Initializing cgroup subsys cpuacct
    Jun 24 13:35:25 myhost kernel: Initializing cgroup subsys memory
    Jun 24 13:35:25 myhost kernel: Initializing cgroup subsys devices
    Jun 24 13:35:25 myhost kernel: Initializing cgroup subsys freezer
    Jun 24 13:35:25 myhost kernel: Initializing cgroup subsys net_cls
    Jun 24 13:35:25 myhost kernel: CPU: Physical Processor ID: 0
    Jun 24 13:35:25 myhost kernel: CPU: Processor Core ID: 0
    Jun 24 13:35:25 myhost kernel: mce: CPU supports 6 MCE banks
    Jun 24 13:35:25 myhost kernel: CPU0: Thermal monitoring enabled (TM2)
    Jun 24 13:35:25 myhost kernel: using mwait in idle threads.
    Jun 24 13:35:25 myhost kernel: Performance Events: Core2 events, Intel PMU driver.
    Jun 24 13:35:25 myhost kernel: ... version: 2
    Jun 24 13:35:25 myhost kernel: ... bit width: 40
    Jun 24 13:35:25 myhost kernel: ... generic registers: 2
    Jun 24 13:35:25 myhost kernel: ... value mask: 000000ffffffffff
    Jun 24 13:35:25 myhost kernel: ... max period: 000000007fffffff
    Jun 24 13:35:25 myhost kernel: ... fixed-purpose events: 3
    Jun 24 13:35:25 myhost kernel: ... event mask: 0000000700000003
    Jun 24 13:35:25 myhost kernel: ACPI: Core revision 20100121
    Jun 24 13:35:25 myhost kernel: Setting APIC routing to flat
    Jun 24 13:35:25 myhost kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Jun 24 13:35:25 myhost kernel: CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
    Jun 24 13:35:25 myhost kernel: Booting Node 0, Processors #1 Ok.
    Jun 24 13:35:25 myhost kernel: Brought up 2 CPUs
    Jun 24 13:35:25 myhost kernel: Total of 2 processors activated (10111.01 BogoMIPS).
    Jun 24 13:35:25 myhost kernel: devtmpfs: initialized
    Jun 24 13:35:25 myhost kernel: NET: Registered protocol family 16
    Jun 24 13:35:25 myhost kernel: ACPI: bus type pci registered
    Jun 24 13:35:25 myhost kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Jun 24 13:35:25 myhost kernel: PCI: not using MMCONFIG
    Jun 24 13:35:25 myhost kernel: PCI: Using configuration type 1 for base access
    Jun 24 13:35:25 myhost kernel: bio: create slab <bio-0> at 0
    Jun 24 13:35:25 myhost kernel: ACPI: BIOS _OSI(Linux) query ignored
    Jun 24 13:35:25 myhost kernel: ACPI: SSDT 00000000bfd1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    Jun 24 13:35:25 myhost kernel: ACPI: SSDT 00000000bfd18620 00575 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    Jun 24 13:35:25 myhost kernel: ACPI: SSDT 00000000bfd19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
    Jun 24 13:35:25 myhost kernel: ACPI: SSDT 00000000bfd19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
    Jun 24 13:35:25 myhost kernel: ACPI: Interpreter enabled
    Jun 24 13:35:25 myhost kernel: ACPI: (supports S0 S3 S4 S5)
    Jun 24 13:35:25 myhost kernel: ACPI: Using IOAPIC for interrupt routing
    Jun 24 13:35:25 myhost kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Jun 24 13:35:25 myhost kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    Jun 24 13:35:25 myhost kernel: ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    Jun 24 13:35:25 myhost kernel: ACPI: No dock devices found.
    Jun 24 13:35:25 myhost kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Jun 24 13:35:25 myhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
    Jun 24 13:35:25 myhost kernel: pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    Jun 24 13:35:25 myhost kernel: pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    Jun 24 13:35:25 myhost kernel: pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    Jun 24 13:35:25 myhost kernel: pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    Jun 24 13:35:25 myhost kernel: pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    Jun 24 13:35:25 myhost kernel: pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    Jun 24 13:35:25 myhost kernel: pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
    Jun 24 13:35:25 myhost kernel: DMAR: Forcing write-buffer flush capability
    Jun 24 13:35:25 myhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.0: PCI bridge to [bus 02-03]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.1: PCI bridge to [bus 04-05]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.3: PCI bridge to [bus 06-07]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.5: PCI bridge to [bus 08-08]
    Jun 24 13:35:25 myhost kernel: pci 0000:09:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
    Jun 24 13:35:25 myhost kernel: pci 0000:09:01.0: MMC cards are now supported by standard SDHCI controller
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
    Jun 24 13:35:25 myhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    Jun 24 13:35:25 myhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    Jun 24 13:35:25 myhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    Jun 24 13:35:25 myhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    Jun 24 13:35:25 myhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    Jun 24 13:35:25 myhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    Jun 24 13:35:25 myhost kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    Jun 24 13:35:25 myhost kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
    Jun 24 13:35:25 myhost kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    Jun 24 13:35:25 myhost kernel: vgaarb: loaded
    Jun 24 13:35:25 myhost kernel: PCI: Using ACPI for IRQ routing
    Jun 24 13:35:25 myhost kernel: NetLabel: Initializing
    Jun 24 13:35:25 myhost kernel: NetLabel: domain hash size = 128
    Jun 24 13:35:25 myhost kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Jun 24 13:35:25 myhost kernel: NetLabel: unlabeled traffic allowed by default
    Jun 24 13:35:25 myhost kernel: HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    Jun 24 13:35:25 myhost kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    Jun 24 13:35:25 myhost kernel: hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    Jun 24 13:35:25 myhost kernel: Switching to clocksource tsc
    Jun 24 13:35:25 myhost kernel: pnp: PnP ACPI init
    Jun 24 13:35:25 myhost kernel: ACPI: bus type pnp registered
    Jun 24 13:35:25 myhost kernel: pnp: PnP ACPI: found 10 devices
    Jun 24 13:35:25 myhost kernel: ACPI: ACPI bus type pnp unregistered
    Jun 24 13:35:25 myhost kernel: system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
    Jun 24 13:35:25 myhost kernel: system 00:04: [io 0x0400-0x047f] has been reserved
    Jun 24 13:35:25 myhost kernel: system 00:04: [io 0x0680-0x069f] has been reserved
    Jun 24 13:35:25 myhost kernel: system 00:04: [io 0x0480-0x048f] has been reserved
    Jun 24 13:35:25 myhost kernel: system 00:04: [io 0xffff] has been reserved
    Jun 24 13:35:25 myhost kernel: system 00:04: [io 0xffff] has been reserved
    Jun 24 13:35:25 myhost kernel: system 00:04: [io 0x1000-0x107f] has been reserved
    Jun 24 13:35:25 myhost kernel: system 00:04: [io 0x1180-0x11ff] has been reserved
    Jun 24 13:35:25 myhost kernel: system 00:04: [io 0x164e-0x164f] has been reserved
    Jun 24 13:35:25 myhost kernel: system 00:04: [io 0xfe00] has been reserved
    Jun 24 13:35:25 myhost kernel: system 00:04: [io 0x0900-0x097f] has been reserved
    Jun 24 13:35:25 myhost kernel: system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    Jun 24 13:35:25 myhost kernel: system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
    Jun 24 13:35:25 myhost kernel: system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    Jun 24 13:35:25 myhost kernel: system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    Jun 24 13:35:25 myhost kernel: system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
    Jun 24 13:35:25 myhost kernel: system 00:09: [mem 0xfeb00000-0xfeb03fff] has been reserved
    Jun 24 13:35:25 myhost kernel: system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    Jun 24 13:35:25 myhost kernel: system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
    Jun 24 13:35:25 myhost kernel: system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.5: BAR 13: assigned [io 0x6000-0x6fff]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0200000-0xc02000ff 64bit]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1f.3: BAR 0: set to [mem 0xc0200000-0xc02000ff 64bit] (PCI address [0xc0200000-0xc02000ff]
    Jun 24 13:35:25 myhost kernel: pci 0000:01:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.0: PCI bridge to [bus 02-03]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.1: PCI bridge to [bus 04-05]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.3: PCI bridge to [bus 06-07]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbffffff]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.5: PCI bridge to [bus 08-08]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.5: bridge window [io 0x6000-0x6fff]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.5: bridge window [mem 0xfc000000-0xfc0fffff]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1e.0: PCI bridge to [bus 09-09]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1e.0: bridge window [io disabled]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc1fffff]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1e.0: bridge window [mem pref disabled]
    Jun 24 13:35:25 myhost kernel: pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    Jun 24 13:35:25 myhost kernel: pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    Jun 24 13:35:25 myhost kernel: NET: Registered protocol family 2
    Jun 24 13:35:25 myhost kernel: IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Jun 24 13:35:25 myhost kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    Jun 24 13:35:25 myhost kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    Jun 24 13:35:25 myhost kernel: TCP: Hash tables configured (established 262144 bind 65536)
    Jun 24 13:35:25 myhost kernel: TCP reno registered
    Jun 24 13:35:25 myhost kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes)
    Jun 24 13:35:25 myhost kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    Jun 24 13:35:25 myhost kernel: NET: Registered protocol family 1
    Jun 24 13:35:25 myhost kernel: Unpacking initramfs...
    Jun 24 13:35:25 myhost kernel: Freeing initrd memory: 1628k freed
    Jun 24 13:35:25 myhost kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Jun 24 13:35:25 myhost kernel: Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
    Jun 24 13:35:25 myhost kernel: software IO TLB at phys 0x5a00000 - 0x9a00000
    Jun 24 13:35:25 myhost kernel: Simple Boot Flag at 0x36 set to 0x1
    Jun 24 13:35:25 myhost kernel: Scanning for low memory corruption every 60 seconds
    Jun 24 13:35:25 myhost kernel: audit: initializing netlink socket (disabled)
    Jun 24 13:35:25 myhost kernel: type=2000 audit(1277408113.306:1): initialized
    Jun 24 13:35:25 myhost kernel: VFS: Disk quotas dquot_6.5.2
    Jun 24 13:35:25 myhost kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Jun 24 13:35:25 myhost kernel: msgmni has been set to 7913
    Jun 24 13:35:25 myhost kernel: alg: No test for stdrng (krng)
    Jun 24 13:35:25 myhost kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    Jun 24 13:35:25 myhost kernel: io scheduler noop registered
    Jun 24 13:35:25 myhost kernel: io scheduler deadline registered
    Jun 24 13:35:25 myhost kernel: io scheduler cfq registered (default)
    Jun 24 13:35:25 myhost kernel: pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS
    Jun 24 13:35:25 myhost kernel: pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: no _OSC support
    Jun 24 13:35:25 myhost kernel: pcie_pme: probe of 0000:00:01.0:pcie01 failed with error -13
    Jun 24 13:35:25 myhost kernel: pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
    Jun 24 13:35:25 myhost kernel: pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: no _OSC support
    Jun 24 13:35:25 myhost kernel: pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13
    Jun 24 13:35:25 myhost kernel: pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS
    Jun 24 13:35:25 myhost kernel: pcieport 0000:00:1c.1: Failed to receive control of PCIe PME service: no _OSC support
    Jun 24 13:35:25 myhost kernel: pcie_pme: probe of 0000:00:1c.1:pcie01 failed with error -13
    Jun 24 13:35:25 myhost kernel: pcieport 0000:00:1c.3: Requesting control of PCIe PME from ACPI BIOS
    Jun 24 13:35:25 myhost kernel: pcieport 0000:00:1c.3: Failed to receive control of PCIe PME service: no _OSC support
    Jun 24 13:35:25 myhost kernel: pcie_pme: probe of 0000:00:1c.3:pcie01 failed with error -13
    Jun 24 13:35:25 myhost kernel: pcieport 0000:00:1c.5: Requesting control of PCIe PME from ACPI BIOS
    Jun 24 13:35:25 myhost kernel: pcieport 0000:00:1c.5: Failed to receive control of PCIe PME service: no _OSC support
    Jun 24 13:35:25 myhost kernel: pcie_pme: probe of 0000:00:1c.5:pcie01 failed with error -13
    Jun 24 13:35:25 myhost kernel: vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010100000, using 1536k, total 16384k
    Jun 24 13:35:25 myhost kernel: vesafb: mode is 1024x768x8, linelength=1024, pages=18
    Jun 24 13:35:25 myhost kernel: vesafb: scrolling: redraw
    Jun 24 13:35:25 myhost kernel: vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
    Jun 24 13:35:25 myhost kernel: Console: switching to colour frame buffer device 128x48
    Jun 24 13:35:25 myhost kernel: fb0: VESA VGA frame buffer device
    Jun 24 13:35:25 myhost kernel: Linux agpgart interface v0.103
    Jun 24 13:35:25 myhost kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jun 24 13:35:25 myhost kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    Jun 24 13:35:25 myhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Jun 24 13:35:25 myhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    Jun 24 13:35:25 myhost kernel: mice: PS/2 mouse device common for all mice
    Jun 24 13:35:25 myhost kernel: cpuidle: using governor ladder
    Jun 24 13:35:25 myhost kernel: cpuidle: using governor menu
    Jun 24 13:35:25 myhost kernel: TCP cubic registered
    Jun 24 13:35:25 myhost kernel: NET: Registered protocol family 17
    Jun 24 13:35:25 myhost kernel: registered taskstats version 1
    Jun 24 13:35:25 myhost kernel: Initalizing network drop monitor service
    Jun 24 13:35:25 myhost kernel: Freeing unused kernel memory: 480k freed
    Jun 24 13:35:25 myhost kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Jun 24 13:35:25 myhost kernel: udev: starting version 157
    Jun 24 13:35:25 myhost kernel: SCSI subsystem initialized
    Jun 24 13:35:25 myhost kernel: ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Jun 24 13:35:25 myhost kernel: ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    Jun 24 13:35:25 myhost kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs
    Jun 24 13:35:25 myhost kernel: scsi0 : ahci
    Jun 24 13:35:25 myhost kernel: scsi1 : ahci
    Jun 24 13:35:25 myhost kernel: scsi2 : ahci
    Jun 24 13:35:25 myhost kernel: scsi3 : ahci
    Jun 24 13:35:25 myhost kernel: scsi4 : ahci
    Jun 24 13:35:25 myhost kernel: scsi5 : ahci
    Jun 24 13:35:25 myhost kernel: ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 29
    Jun 24 13:35:25 myhost kernel: ata2: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 29
    Jun 24 13:35:25 myhost kernel: ata3: DUMMY
    Jun 24 13:35:25 myhost kernel: ata4: DUMMY
    Jun 24 13:35:25 myhost kernel: ata5: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404300 irq 29
    Jun 24 13:35:25 myhost kernel: ata6: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404380 irq 29
    Jun 24 13:35:25 myhost kernel: ata6: SATA link down (SStatus 0 SControl 300)
    Jun 24 13:35:25 myhost kernel: ata5: SATA link down (SStatus 0 SControl 300)
    Jun 24 13:35:25 myhost kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Jun 24 13:35:25 myhost kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Jun 24 13:35:25 myhost kernel: ata2.00: ATAPI: HL-DT-ST DVDRW/BDROM CA10N, A107, max UDMA/133
    Jun 24 13:35:25 myhost kernel: ata2.00: configured for UDMA/133
    Jun 24 13:35:25 myhost kernel: ata1.00: ATA-8: ST9320421ASG, DE17, max UDMA/133
    Jun 24 13:35:25 myhost kernel: ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
    Jun 24 13:35:25 myhost kernel: ata1.00: configured for UDMA/133
    Jun 24 13:35:25 myhost kernel: scsi 0:0:0:0: Direct-Access ATA ST9320421ASG DE17 PQ: 0 ANSI: 5
    Jun 24 13:35:25 myhost kernel: scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRWBD CA10N A107 PQ: 0 ANSI: 5
    Jun 24 13:35:25 myhost kernel: sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    Jun 24 13:35:25 myhost kernel: sd 0:0:0:0: [sda] Write Protect is off
    Jun 24 13:35:25 myhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jun 24 13:35:25 myhost kernel: sda: sda1 sda2 sda3 <sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
    Jun 24 13:35:25 myhost kernel: Uniform CD-ROM driver Revision: 3.20
    Jun 24 13:35:25 myhost kernel: sda5 sda6 sda7 sda8 > sda4
    Jun 24 13:35:25 myhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Jun 24 13:35:25 myhost kernel: EXT4-fs (sda8): mounted filesystem with ordered data mode
    Jun 24 13:35:25 myhost kernel: rtc_cmos 00:06: RTC can wake from S4
    Jun 24 13:35:25 myhost kernel: rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    Jun 24 13:35:25 myhost kernel: rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    Jun 24 13:35:25 myhost kernel: udev: starting version 157
    Jun 24 13:35:25 myhost kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
    Jun 24 13:35:25 myhost kernel: ACPI: Power Button [PWRB]
    Jun 24 13:35:25 myhost kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
    Jun 24 13:35:25 myhost kernel: ACPI: Sleep Button [SLPB]
    Jun 24 13:35:25 myhost kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
    Jun 24 13:35:25 myhost kernel: ACPI: Lid Switch [LID0]
    Jun 24 13:35:25 myhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
    Jun 24 13:35:25 myhost kernel: sr 1:0:0:0: Attached scsi generic sg1 type 5
    Jun 24 13:35:25 myhost kernel: Marking TSC unstable due to TSC halts in idle
    Jun 24 13:35:25 myhost kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    Jun 24 13:35:25 myhost kernel: ACPI: Power Button [PWRF]
    Jun 24 13:35:25 myhost kernel: thermal LNXTHERM:01: registered as thermal_zone0
    Jun 24 13:35:25 myhost kernel: ACPI: Thermal Zone [TZ00] (63 C)
    Jun 24 13:35:25 myhost kernel: thermal LNXTHERM:02: registered as thermal_zone1
    Jun 24 13:35:25 myhost kernel: ACPI: Thermal Zone [TZ01] (52 C)
    Jun 24 13:35:25 myhost kernel: thermal LNXTHERM:03: registered as thermal_zone2
    Jun 24 13:35:25 myhost kernel: ACPI: Thermal Zone [TZ02] (62 C)
    Jun 24 13:35:25 myhost kernel: dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    Jun 24 13:35:25 myhost kernel: Switching to clocksource hpet
    Jun 24 13:35:25 myhost kernel: ACPI: AC Adapter [ADP1] (on-line)
    Jun 24 13:35:25 myhost kernel: ACPI: WMI: Mapper loaded
    Jun 24 13:35:25 myhost kernel: ACPI: Battery Slot [BAT0] (battery present)
    Jun 24 13:35:25 myhost kernel: input: PC Speaker as /devices/platform/pcspkr/input/input5
    Jun 24 13:35:25 myhost kernel: iTCO_vendor_support: vendor-support=0
    Jun 24 13:35:25 myhost kernel: usbcore: registered new interface driver usbfs
    Jun 24 13:35:25 myhost kernel: usbcore: registered new interface driver hub
    Jun 24 13:35:25 myhost kernel: usbcore: registered new device driver usb
    Jun 24 13:35:25 myhost kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6
    Jun 24 13:35:25 myhost kernel: ACPI: Video Device [M86] (multi-head: yes rom: no post: no)
    Jun 24 13:35:25 myhost kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    Jun 24 13:35:25 myhost kernel: iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
    Jun 24 13:35:25 myhost kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    Jun 24 13:35:25 myhost kernel: input: Dell WMI hotkeys as /devices/virtual/input/input7
    Jun 24 13:35:25 myhost kernel: i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    Jun 24 13:35:25 myhost kernel: ACPI: resource 0000:00:1f.3 [io 0x1c00-0x1c1f] conflicts with ACPI region SMBI [mem 0x00001c00-0x00001c0f pref disabled]
    Jun 24 13:35:25 myhost kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Jun 24 13:35:25 myhost kernel: tg3.c:v3.108 (February 17, 2010)
    Jun 24 13:35:25 myhost kernel: tg3 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Jun 24 13:35:25 myhost kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jun 24 13:35:25 myhost kernel: ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    Jun 24 13:35:25 myhost kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller
    Jun 24 13:35:25 myhost kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    Jun 24 13:35:25 myhost kernel: ehci_hcd 0000:00:1a.7: debug port 1
    Jun 24 13:35:25 myhost kernel: ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc404800
    Jun 24 13:35:25 myhost kernel: ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    Jun 24 13:35:25 myhost kernel: hub 1-0:1.0: USB hub found
    Jun 24 13:35:25 myhost kernel: hub 1-0:1.0: 6 ports detected
    Jun 24 13:35:25 myhost kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Jun 24 13:35:25 myhost kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
    Jun 24 13:35:25 myhost kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    Jun 24 13:35:25 myhost kernel: ehci_hcd 0000:00:1d.7: debug port 1
    Jun 24 13:35:25 myhost kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00
    Jun 24 13:35:25 myhost kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    Jun 24 13:35:25 myhost kernel: hub 2-0:1.0: USB hub found
    Jun 24 13:35:25 myhost kernel: hub 2-0:1.0: 6 ports detected
    Jun 24 13:35:25 myhost kernel: uhci_hcd: USB Universal Host Controller Interface driver
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
    Jun 24 13:35:25 myhost kernel: hub 3-0:1.0: USB hub found
    Jun 24 13:35:25 myhost kernel: hub 3-0:1.0: 2 ports detected
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
    Jun 24 13:35:25 myhost kernel: hub 4-0:1.0: USB hub found
    Jun 24 13:35:25 myhost kernel: hub 4-0:1.0: 2 ports detected
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
    Jun 24 13:35:25 myhost kernel: hub 5-0:1.0: USB hub found
    Jun 24 13:35:25 myhost kernel: hub 5-0:1.0: 2 ports detected
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
    Jun 24 13:35:25 myhost kernel: hub 6-0:1.0: USB hub found
    Jun 24 13:35:25 myhost kernel: hub 6-0:1.0: 2 ports detected
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
    Jun 24 13:35:25 myhost kernel: hub 7-0:1.0: USB hub found
    Jun 24 13:35:25 myhost kernel: hub 7-0:1.0: 2 ports detected
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    Jun 24 13:35:25 myhost kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
    Jun 24 13:35:25 myhost kernel: hub 8-0:1.0: USB hub found
    Jun 24 13:35:25 myhost kernel: hub 8-0:1.0: 2 ports detected
    Jun 24 13:35:25 myhost kernel: [drm] Initialized drm 1.1.0 20060810
    Jun 24 13:35:25 myhost kernel: tg3 0000:08:00.0: eth0: Tigon3 [partno(none) rev 5784100] (PCI Express) MAC address 00:22:19:f6:92:73
    Jun 24 13:35:25 myhost kernel: tg3 0000:08:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1])
    Jun 24 13:35:25 myhost kernel: tg3 0000:08:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    Jun 24 13:35:25 myhost kernel: tg3 0000:08:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    Jun 24 13:35:25 myhost kernel: firewire_ohci 0000:09:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Jun 24 13:35:25 myhost kernel: firewire_ohci: Added fw-ohci device 0000:09:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x0
    Jun 24 13:35:25 myhost kernel: sdhci: Secure Digital Host Controller Interface driver
    Jun 24 13:35:25 myhost kernel: sdhci: Copyright(c) Pierre Ossman
    Jun 24 13:35:25 myhost kernel: cfg80211: Calling CRDA to update world regulatory domain
    Jun 24 13:35:25 myhost kernel: usb 1-6: new high speed USB device using ehci_hcd and address 2
    Jun 24 13:35:25 myhost kernel: sdhci-pci 0000:09:01.1: SDHCI controller found [1180:0822] (rev 22)
    Jun 24 13:35:25 myhost kernel: sdhci-pci 0000:09:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    Jun 24 13:35:25 myhost kernel: mmc0: SDHCI controller on PCI [0000:09:01.1] using DMA
    Jun 24 13:35:25 myhost kernel: Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
    Jun 24 13:35:25 myhost kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    Jun 24 13:35:25 myhost kernel: [drm] radeon defaulting to kernel modesetting.
    Jun 24 13:35:25 myhost kernel: [drm] radeon kernel modesetting enabled.
    Jun 24 13:35:25 myhost kernel: radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jun 24 13:35:25 myhost kernel: [drm] initializing kernel modesetting (RV635 0x1002:0x9593).
    Jun 24 13:35:25 myhost kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    Jun 24 13:35:25 myhost kernel: [drm] register mmio base: 0xCFEF0000
    Jun 24 13:35:25 myhost kernel: [drm] register mmio size: 65536
    Jun 24 13:35:25 myhost kernel: ATOM BIOS: BR32049
    Jun 24 13:35:25 myhost kernel: [drm] Clocks initialized !
    Jun 24 13:35:25 myhost kernel: [drm] 6 Power State(s)
    Jun 24 13:35:25 myhost kernel: [drm] State 0 Default (default)
    Jun 24 13:35:25 myhost kernel: [drm] 16 PCIE Lanes
    Jun 24 13:35:25 myhost kernel: [drm] 3 Clock Mode(s)
    Jun 24 13:35:25 myhost kernel: [drm] 0 engine/memory: 400000/800000
    Jun 24 13:35:25 myhost kernel: [drm] 1 engine/memory: 400000/800000
    Jun 24 13:35:25 myhost kernel: [drm] 2 engine/memory: 400000/800000
    Jun 24 13:35:25 myhost kernel: [drm] State 1 Performance
    Jun 24 13:35:25 myhost kernel: [drm] 16 PCIE Lanes
    Jun 24 13:35:25 myhost kernel: [drm] 2 Clock Mode(s)
    Jun 24 13:35:25 myhost kernel: [drm] 0 engine/memory: 110000/405000
    Jun 24 13:35:25 myhost kernel: [drm] 1 engine/memory: 300000/405000
    Jun 24 13:35:25 myhost kernel: [drm] State 2 Battery
    Jun 24 13:35:25 myhost kernel: [drm] 16 PCIE Lanes
    Jun 24 13:35:25 myhost kernel: [drm] 3 Clock Mode(s)
    Jun 24 13:35:25 myhost kernel: [drm] 0 engine/memory: 110000/405000
    Jun 24 13:35:25 myhost kernel: [drm] 1 engine/memory: 300000/405000
    Jun 24 13:35:25 myhost kernel: [drm] 2 engine/memory: 300000/405000
    Jun 24 13:35:25 myhost kernel: [drm] State 3 Default
    Jun 24 13:35:25 myhost kernel: [drm] 16 PCIE Lanes
    Jun 24 13:35:25 myhost kernel: [drm] 2 Clock Mode(s)
    Jun 24 13:35:25 myhost kernel: [drm] 0 engine/memory: 340000/405000
    Jun 24 13:35:25 myhost kernel: [drm] 1 engine/memory: 340000/405000
    Jun 24 13:35:25 myhost kernel: [drm] State 4 Performance
    Jun 24 13:35:25 myhost kernel: [drm] 16 PCIE Lanes
    Jun 24 13:35:25 myhost kernel: [drm] 2 Clock Mode(s)
    Jun 24 13:35:25 myhost kernel: [drm] 0 engine/memory: 340000/800000
    Jun 24 13:35:25 myhost kernel: [drm] 1 engine/memory: 340000/800000
    Jun 24 13:35:25 myhost kernel: [drm] State 5 Battery
    Jun 24 13:35:25 myhost kernel: [drm] 16 PCIE Lanes
    Jun 24 13:35:25 myhost kernel: [drm] 3 Clock Mode(s)
    Jun 24 13:35:25 myhost kernel: [drm] 0 engine/memory: 340000/405000
    Jun 24 13:35:25 myhost kernel: [drm] 1 engine/memory: 340000/405000
    Jun 24 13:35:25 myhost kernel: [drm] 2 engine/memory: 340000/405000
    Jun 24 13:35:25 myhost kernel: [drm] radeon: power management initialized
    Jun 24 13:35:25 myhost kernel: radeon 0000:01:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
    Jun 24 13:35:25 myhost kernel: radeon 0000:01:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
    Jun 24 13:35:25 myhost kernel: [drm] Detected VRAM RAM=256M, BAR=256M
    Jun 24 13:35:25 myhost kernel: [drm] RAM width 128bits DDR
    Jun 24 13:35:25 myhost kernel: [TTM] Zone kernel: Available graphics memory: 2026178 kiB.
    Jun 24 13:35:25 myhost kernel: [drm] radeon: 256M of VRAM memory ready
    Jun 24 13:35:25 myhost kernel: [drm] radeon: 512M of GTT memory ready.
    Jun 24 13:35:25 myhost kernel: [drm] radeon: using MSI.
    Jun 24 13:35:25 myhost kernel: [drm] radeon: irq initialized.
    Jun 24 13:35:25 myhost kernel: [drm] GART: num cpu pages 131072, num gpu pages 131072
    Jun 24 13:35:25 myhost kernel: [drm] Loading RV635 Microcode
    Jun 24 13:35:25 myhost kernel: platform radeon_cp.0: firmware: requesting radeon/RV635_pfp.bin
    Jun 24 13:35:25 myhost kernel: firewire_core: created device fw0: GUID 0000000000000000, S400
    Jun 24 13:35:25 myhost kernel: platform radeon_cp.0: firmware: requesting radeon/RV635_me.bin
    Jun 24 13:35:25 myhost kernel: platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
    Jun 24 13:35:25 myhost kernel: radeon 0000:01:00.0: ffff880139550800 unpin not necessary
    Jun 24 13:35:25 myhost kernel: radeon 0000:01:00.0: ffff880139550800 unpin not necessary
    Jun 24 13:35:25 myhost kernel: [drm] Enabling audio support
    Jun 24 13:35:25 myhost kernel: [drm] Default TV standard: NTSC
    Jun 24 13:35:25 myhost kernel: [drm] Radeon Display Connectors
    Jun 24 13:35:25 myhost kernel: [drm] Connector 0:
    Jun 24 13:35:25 myhost kernel: [drm] VGA
    Jun 24 13:35:25 myhost kernel: [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
    Jun 24 13:35:25 myhost kernel: [drm] Encoders:
    Jun 24 13:35:25 myhost kernel: [drm] CRT1: INTERNAL_KLDSCP_DAC1
    Jun 24 13:35:25 myhost kernel: [drm] Connector 1:
    Jun 24 13:35:25 myhost kernel: [drm] HDMI-A
    Jun 24 13:35:25 myhost kernel: [drm] HPD1
    Jun 24 13:35:25 myhost kernel: [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
    Jun 24 13:35:25 myhost kernel: [drm] Encoders:
    Jun 24 13:35:25 myhost kernel: [drm] DFP1: INTERNAL_UNIPHY
    Jun 24 13:35:25 myhost kernel: [drm] Connector 2:
    Jun 24 13:35:25 myhost kernel: [drm] LVDS
    Jun 24 13:35:25 myhost kernel: [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    Jun 24 13:35:25 myhost kernel: [drm] Encoders:
    Jun 24 13:35:25 myhost kernel: [drm] LCD1: INTERNAL_KLDSCP_LVTMA
    Jun 24 13:35:25 myhost kernel: [drm] Connector 3:
    Jun 24 13:35:25 myhost kernel: [drm] DisplayPort
    Jun 24 13:35:25 myhost kernel: [drm] HPD2
    Jun 24 13:35:25 myhost kernel: [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
    Jun 24 13:35:25 myhost kernel: [drm] Encoders:
    Jun 24 13:35:25 myhost kernel: [drm] DFP2: INTERNAL_UNIPHY
    Jun 24 13:35:25 myhost kernel: iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    Jun 24 13:35:25 myhost kernel: iwlagn: Copyright(c) 2003-2010 Intel Corporation
    Jun 24 13:35:25 myhost kernel: iwlagn 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Jun 24 13:35:25 myhost kernel: iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
    Jun 24 13:35:25 myhost kernel: input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
    Jun 24 13:35:25 myhost kernel: input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    Jun 24 13:35:25 myhost kernel: input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    Jun 24 13:35:25 myhost kernel: input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    Jun 24 13:35:25 myhost kernel: iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
    Jun 24 13:35:25 myhost kernel: iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode
    Jun 24 13:35:25 myhost kernel: [drm] fb mappable at 0xD0040000
    Jun 24 13:35:25 myhost kernel: [drm] vram apper at 0xD0000000
    Jun 24 13:35:25 myhost kernel: [drm] size 8294400
    Jun 24 13:35:25 myhost kernel: [drm] fb depth is 24
    Jun 24 13:35:25 myhost kernel: [drm] pitch is 7680
    Jun 24 13:35:25 myhost kernel: Console: switching to colour dummy device 80x25
    Jun 24 13:35:25 myhost kernel: Console: switching to colour frame buffer device 240x67
    Jun 24 13:35:25 myhost kernel: iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12
    Jun 24 13:35:25 myhost kernel: Linux video capture interface: v2.00
    Jun 24 13:35:25 myhost kernel: uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63fa)
    Jun 24 13:35:25 myhost kernel: fb0: radeondrmfb frame buffer device
    Jun 24 13:35:25 myhost kernel: registered panic notifier
    Jun 24 13:35:25 myhost kernel: [drm] Initialized radeon 2.3.0 20080528 for 0000:01:00.0 on minor 0
    Jun 24 13:35:25 myhost kernel: HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Jun 24 13:35:25 myhost kernel: input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input13
    Jun 24 13:35:25 myhost kernel: usbcore: registered new interface driver uvcvideo
    Jun 24 13:35:25 myhost kernel: USB Video Class driver (v0.1.0)
    Jun 24 13:35:25 myhost kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode
    Jun 24 13:35:25 myhost kernel: EXT4-fs (sda4): mounted filesystem with ordered data mode
    Jun 24 13:35:25 myhost kernel: EXT4-fs (sda5): mounted filesystem with ordered data mode
    Jun 24 13:35:25 myhost kernel: EXT4-fs (sda6): mounted filesystem with ordered data mode
    Jun 24 13:35:25 myhost kernel: Adding 8000332k swap on /dev/sda7. Priority:-1 extents:1 across:8000332k
    Jun 24 13:35:24 myhost init: Entering runlevel: 3
    Jun 24 13:35:44 myhost kernel: Intel AES-NI instructions are not detected.
    Jun 24 13:35:44 myhost kernel: padlock: VIA PadLock not detected.
    Jun 24 13:35:47 myhost dhcpcd[1825]: version 5.2.5 starting
    Jun 24 13:35:47 myhost dhcpcd[1825]: wlan0: rebinding lease of 192.168.1.70
    Jun 24 13:35:47 myhost dhcpcd[1825]: wlan0: acknowledged 192.168.1.70 from 192.168.1.254
    Jun 24 13:35:47 myhost dhcpcd[1825]: wlan0: checking for 192.168.1.70
    Jun 24 13:35:52 myhost dhcpcd[1825]: wlan0: leased 192.168.1.70 for 86400 seconds
    Jun 24 13:35:52 myhost dhcpcd[1825]: forked to background, child pid 1847

  • Wicd: "Connection failed: Unable to get IP Address"

    Hi,
    Wicd has suddenly stopped working for me. The only recent change I can think of is updating virtualbox_bin (from AUR). I can successfully connect to my wireless network from an Ubuntu 10.04 machine, so the problem is on my Arch laptop. Here's my /var/log/everything.log from a fresh boot immediately followed by an attempt to connect to my wireless network:
    Sep 13 23:35:18 archtop polkitd[2252]: started daemon version 0.96 using authority implementation `local' version `0.96'
    Sep 13 23:35:18 archtop pulseaudio[2244]: module-alsa-card.c: Failed to find a working profile.
    Sep 13 23:35:18 archtop pulseaudio[2244]: module.c: Failed to load module "module-alsa-card" (argument: "device_id="29" name="platform-thinkpad_acpi" card_name="alsa_card.platform-thinkpad_acpi" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1""): initialization failed.
    Sep 13 23:35:19 archtop kernel: fuse init (API version 7.14)
    Sep 13 23:35:30 archtop dhcpcd[2627]: dhcpcd not running
    Sep 13 23:35:30 archtop kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Sep 13 23:35:30 archtop dhcpcd[2650]: dhcpcd not running
    Sep 13 23:35:31 archtop kernel: e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
    Sep 13 23:35:31 archtop kernel: e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
    Sep 13 23:35:31 archtop kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
    Sep 13 23:35:31 archtop dhcpcd[2678]: dhcpcd not running
    Sep 13 23:35:31 archtop kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Sep 13 23:35:36 archtop kernel: wlan0: authenticate with ${MAC_ADDRESS} (try 1)
    Sep 13 23:35:36 archtop kernel: wlan0: authenticated
    Sep 13 23:35:36 archtop kernel: wlan0: associate with ${MAC_ADDRESS} (try 1)
    Sep 13 23:35:36 archtop kernel: wlan0: RX AssocResp from ${MAC_ADDRESS} (capab=0x431 status=0 aid=3)
    Sep 13 23:35:36 archtop kernel: wlan0: associated
    Sep 13 23:35:36 archtop kernel: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    Sep 13 23:35:36 archtop kernel: cfg80211: Calling CRDA for country: US
    Sep 13 23:35:36 archtop kernel: Intel AES-NI instructions are not detected.
    Sep 13 23:35:36 archtop kernel: padlock: VIA PadLock not detected.
    Sep 13 23:35:36 archtop kernel: /dev/vmnet: open called by PID 2103 (vmnet-bridge)
    Sep 13 23:35:36 archtop kernel: /dev/vmnet: hub 0 does not exist, allocating memory.
    Sep 13 23:35:36 archtop kernel: /dev/vmnet: port on hub 0 successfully opened
    Sep 13 23:35:36 archtop kernel: bridge-wlan0: up
    Sep 13 23:35:36 archtop vmnetBridge: Adding interface wlan0 index:4
    Sep 13 23:35:36 archtop vmnetBridge: Started bridge wlan0 to virtual network 0.
    Sep 13 23:35:36 archtop kernel: bridge-wlan0: attached
    Sep 13 23:35:37 archtop dhcpcd[3483]: version 5.2.7 starting
    Sep 13 23:35:37 archtop dhcpcd[3483]: wlan0: broadcasting for a lease
    Sep 13 23:35:47 archtop kernel: wlan0: no IPv6 routers present
    Sep 13 23:36:07 archtop dhcpcd[3483]: timed out
    Sep 13 23:36:07 archtop dhcpcd[3648]: dhcpcd not running
    Sep 13 23:36:07 archtop kernel: wlan0: deauthenticating from ${MAC_ADDRESS} by local choice (reason=3)
    Sep 13 23:36:07 archtop vmnetBridge: Removing interface wlan0 index:4
    Sep 13 23:36:07 archtop kernel: bridge-wlan0: disabling the bridge on dev down
    Sep 13 23:36:07 archtop kernel: bridge-wlan0: down
    Sep 13 23:36:07 archtop kernel: cfg80211: Calling CRDA to update world regulatory domain
    Sep 13 23:36:07 archtop kernel: bridge-wlan0: detached
    Sep 13 23:36:07 archtop kernel: /dev/vmnet: open called by PID 2103 (vmnet-bridge)
    Sep 13 23:36:07 archtop kernel: /dev/vmnet: hub 0 does not exist, allocating memory.
    Sep 13 23:36:07 archtop kernel: /dev/vmnet: port on hub 0 successfully opened
    Sep 13 23:36:07 archtop kernel: bridge-wlan0: attached
    Sep 13 23:36:07 archtop vmnetBridge: Stopped bridge wlan0 to virtual network 0.
    Sep 13 23:36:07 archtop vmnetBridge: Adding interface wlan0 index:4
    Sep 13 23:36:07 archtop vmnetBridge: Started bridge wlan0 to virtual network 0.
    Sep 13 23:36:07 archtop vmnetBridge: Removing interface wlan0 index:4
    Sep 13 23:36:07 archtop kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Sep 13 23:36:07 archtop kernel: bridge-wlan0: enabling the bridge on dev up
    Sep 13 23:36:07 archtop kernel: bridge-wlan0: up
    Sep 13 23:36:07 archtop kernel: bridge-wlan0: disabling the bridge
    Sep 13 23:36:07 archtop dhcpcd[3657]: dhcpcd not running
    Sep 13 23:36:07 archtop kernel: bridge-wlan0: down
    Sep 13 23:36:07 archtop kernel: bridge-wlan0: detached
    Sep 13 23:36:07 archtop vmnetBridge: Stopped bridge wlan0 to virtual network 0.
    Sep 13 23:36:08 archtop kernel: e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
    Sep 13 23:36:08 archtop kernel: e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
    Sep 13 23:36:08 archtop kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
    Any ideas?
    Thanks!
    Last edited by w1ntermute (2010-09-14 04:47:21)

    ewaller wrote:Is it possible you have constructed a bridge interface (TAP) and then added one of the VmWare virtual interfaces and wlan0 to that bridge?
    I haven't manually set up any interfaces, that's for sure. In VirtualBox my network adapter is set to "Attached to: NAT", not "Attached to: Bridged Adapter".
    Did you intend to set up a bridge? I find that NAT works much better (unless you need to use the virtual machine as a network server)
    No, I didn't intend to set up anything. I just want wireless and wired to work on my laptop and on my virtual machine, and I want to be able to access shared folders from my host OS in my Windows XP guest OS (which happens via the network sharing functionality in Windows).
    Also, today I tried connecting to another wireless network, and I was successful, so maybe it's something about the way that my home wireless settings are configured. I tried rebooting several times yesterday when I couldn't connect at home, so I don't think it was something fixed by me rebooting before I tried connecting to the other wireless network. I'll try again to connect to my home network in a bit, just in case it was.
    Last edited by w1ntermute (2010-09-14 23:50:51)

Maybe you are looking for