No airdrop after upgrading to lion

I have a 2.66GHz Intel Core 2 Duo (20 inch early 2008) iMac, ugraded to 4 Gb of memory.
I upgraded to Lion which seems to be operating fine, except that Airdrop does not appear in my Finder window.  Do I have to do something to turn it on?
I also have a 2.4 GHz (13 inch late 2008) Macbook running 2 Gb of memory, also upgraded to Lion, which shows Airdrop in the Finder window without having to change anything.
Is my iMac too old to run all of Lion's features?
Thanks for any advice!
Sandy

AirDrop is not supported on all Macs. Only on the newer models. Apparently the older models do not have the needed hardware to support AirDrop.

Similar Messages

  • After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours. Help!

    After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours.
    I tried quitting and starting again but it just jumps back to the same spot.

    It is quite large, but I have tried two of the fixes suggested and things now seem to be moving along.
    (I was unable to seach properly before which is why I posted the question - it was a bit of a panic)

  • After upgrading to Lion, the Finder will increase the virtual memory while using external HD

    after upgrading to Lion, the Finder will increase the "virtual memory size" while using external HD. I check it using Activity Monitor and found that "Finder" wll increase the "Virtual Memory Size" and "Private Memory Size". and then after a while. the system told me my HD is full and hanging there.
    My External HD is 1TB. and I have installed new version Paragon NTFS for Mac V.9.01. I am not sure it is related or not.
    but I attached my external HD. the "Finder" will start to increase the "Virtual Memory Size".
    please help out this case and solve this issue.
    thank you !!!

    The one has nothing to do with the other. Virtual memory size and Private memory size are used by developers to analyze their software. it has nothing to do with anything related to the user.

  • I can't hear sound after upgrading to lion

    I have this little annoying problem with my iMac after upgrading to Lion OSX. After waking up my iMac I can't hear any sound from internal speakers, ie: only video on Youtube, but no sound, but whilst pressing volume up/down button I can hear beep. When it happens So I have to restart system everytime it happens. Anyone any ideas or maybe someone out there has the same problem?

    I'he double checked everything, only 1 output device (internal speakers). As I said before, it is weird because I can play iTunes and can hear "beep", but neither youtube sound, nor game sound or internet radio seems to be working, no sound whatsoever. But this time system didn't go to sleep, it has just happened suddenly.... Restart again then!

  • After upgrading to Lion, wifi seems to be much slower, is this caused by lion?

    Hello All,
    After upgrading to Lion, my MMA wifi seems to work much slower than before, and also the start up seems to be slower too. Is that caused by upgrading to Lion? Please help

    Give it a few days and a dozen or so restarts.
    The software may be updating Spotlight indexing and a few other "housekeeping" tasks.
    My upgrade on a 2010 Air resulted in a slowdown at first, but then began to return to normal. At first, the boot time doubled, but within a couple of days, it was back to a 12 second boot.

  • After upgrading to lion Time Capsule is solid yellow

    Hi
    After upgrading to lion I am experiencing a lot of problems with time caspule
    1. backup fail: it starts and than fails (error message and yellow warning triangle)
    2. unable to connect to TC disk, neither from airport utility, nor from Finder
    3. Airport Utility hangs while trying to manually modify configuration (rainbow weel).
    After a lot of reboot,  reset, disk rename, time capsule reconfiguration etc etc AND TC DISK REINITIALIZATION (ALLA BACKUP LOST!)
    now backup seems to work and I can browse files in Time Machine
    BUT
    Time Capsule is a steady YELLOW and Airport utility says there is an error on disk (The disk is not working)
    Can somebody help me.
    This all happened after Lion installation. Not a problem before
    Franco

    Hi William
    The disk is the internal Time Capsule Disk. It's a 1Tb model.
    My iMac is localized in Italian
    So I write here the Italian message and a possible translation
    The first error message I get opening Airport Utility is:
    Utility Airport ha trovato una Time Capsule 802.11n (2.a generazione) che segnala problemi
    (AirPort Utility has found a Time Capsule 802.11n (2nd generation), which indicates problems)
    If I press on "Continue" I enter a page that says
    "Problema 1 di 1: Il disco Time Capsule non funziona"
    (Problem 1 of 1: The Time Capsule Disk doesn't work)
    "Si è verificato un problema con il Disco Time Capsule. Collega un disco rigido USB al tuo disco Time Capsule e utilizza il pannello Dischi di Utility Airport per archiviare i dati ed eseguire il backup."
    (There was a problem with the Time Capsule disk. Connect a USB hard drive to your Time Capsule disk and use Disk Utility Airport panel to store data and run the backup.)
    While if I go to the manual settings and I select the disk,
    on the disk data info I have
    Stato S.M.A.R.T.: Non funziona
    (S.M.A.R.T status: Not working)
    As I said before, apart from that problem, everything else (time machine, backups and file recovery) looks working good (until proven otherwise eh eh)
    I don't know if to worry about the disk but I find suspicious that everything just started after Lion installation.
    I called the call center and they just said to return the TC for disk repair (have to pay, warranty expired).
    I told them about Lion installation fact and they said it looks like a coincidence but actually it is likely that after a disk initialization or a big amount of data writing the TC disk may break (WHAT ?!?)  and the Apple guy even suggested me to buy an external disk that is less expensive and give less problem than a TC !!!!
    (I can agree on that now, but I was surprised to hear that from them )
    Thank you very much for any help.
    I hope this info helps
    Franco Andrea

  • After upgrading to Lion Time Capsule solid yellow

    Hi
    After upgrading to lion I am experiencing a lot of problems with time caspule
    1. backup fail: it starts and than fails (error message and yellow warning triangle)
    2. unable to connect to TC disk, neither from airport utility, nor from Finder
    3. Airport Utility hangs while trying to manually modify configuration (rainbow weel).
    After a lot of reboot,  reset, disk rename, time capsule reconfiguration etc etc AND TC DISK REINITIALIZATION (ALLA BACKUP LOST!)
    now backup seems to work and I can browse files in Time Machine
    BUT
    Time Capsule is a steady YELLOW and Airport utility says there is an error on disk (The disk is not working)
    Can somebody help me.
    This all happened after Lion installation. Not a problem before
    Franco

    Hi William
    The disk is the internal Time Capsule Disk. It's a 1Tb model.
    My iMac is localized in Italian
    So I write here the Italian message and a possible translation
    The first error message I get opening Airport Utility is:
    Utility Airport ha trovato una Time Capsule 802.11n (2.a generazione) che segnala problemi
    (AirPort Utility has found a Time Capsule 802.11n (2nd generation), which indicates problems)
    If I press on "Continue" I enter a page that says
    "Problema 1 di 1: Il disco Time Capsule non funziona"
    (Problem 1 of 1: The Time Capsule Disk doesn't work)
    "Si è verificato un problema con il Disco Time Capsule. Collega un disco rigido USB al tuo disco Time Capsule e utilizza il pannello Dischi di Utility Airport per archiviare i dati ed eseguire il backup."
    (There was a problem with the Time Capsule disk. Connect a USB hard drive to your Time Capsule disk and use Disk Utility Airport panel to store data and run the backup.)
    While if I go to the manual settings and I select the disk,
    on the disk data info I have
    Stato S.M.A.R.T.: Non funziona
    (S.M.A.R.T status: Not working)
    As I said before, apart from that problem, everything else (time machine, backups and file recovery) looks working good (until proven otherwise eh eh)
    I don't know if to worry about the disk but I find suspicious that everything just started after Lion installation.
    I called the call center and they just said to return the TC for disk repair (have to pay, warranty expired).
    I told them about Lion installation fact and they said it looks like a coincidence but actually it is likely that after a disk initialization or a big amount of data writing the TC disk may break (WHAT ?!?)  and the Apple guy even suggested me to buy an external disk that is less expensive and give less problem than a TC !!!!
    (I can agree on that now, but I was surprised to hear that from them )
    Thank you very much for any help.
    I hope this info helps
    Franco Andrea

  • After upgrading to Lion, FaceTime does not give me a login screen.  Help!

    After upgrading to Lion, I tried to use FaceTime for the first time.  The login screen never launches.  What can I do to get a login screen?

    update: It seems like the XCode update did interfere with itunes. I reran the XCode install this time with itunes not running. This seems to update all necessary drivers and Library items correctly.
    After this IPad and IPod touch were working fine again.

  • After upgrading to Lion, Preview (5.2.2) appears to have lost the facility to run a slide show by using my mouse to click an icon in the visible menu bar, as I could in the previous version.  Can I retrieve that icon and thus that facility?

    After upgrading to Lion, Preview (5.2.2) appears to have lost the facility to run a slide show by using my mouse to click an icon in the visible menu bar, as I could in the previous version.  Can I retrieve that icon and thus that facility?

    Unfortunately not. Lion has made many adjustments to the previous system. Try opening your pdfs in keynote.

  • After upgrading to lion my web server won't run

    after upgrading to lion my web server won't run

    From System Prefs clicking on Web Shareing wont start.
    From the terminal attempting to run httpd gives me:
    iBookWiz:~ steve$ sudo httpd
    httpd: Syntax error on line 117 of /private/etc/apache2/httpd.conf: Cannot load /usr/libexec/apache2/mod_fastcgi.so into server: dlopen(/usr/libexec/apache2/mod_fastcgi.so, 10): image not found

  • After upgrading to lion 10.7 I can no longer use my canoscan 9950f, why?

    After upgrading to lion 10.7 my canoscan 9950f scanner is no longer recognized. Have I lost thye use of this scanner by going to 10.7?

    Not likely. Make sure the scanner is still available in System Preferences > Print & Scan. You might have to delete the old scanner and add it again if your computer cannot "find" it.
    Before you do that, and while you are in Print & Scan, see if  you can get it to scan by selecting the Scan tab.
    In Lion, all scanning functions have been relegated to Preview, the Print & Scan preference pane, and Image Capture.

  • After upgrading to lion starting up is taking much more time ??

    After upgrading to lion starting up is taking much more time is there any solution to this ?
    i do all things about cleaning disk permission or editing .

    Have you check what is being started at the same time?
    Lion will start more applications then were being started in the past.
    Allan

  • After upgrading to Lion, Printer error messages.

    After upgrading to Lion, I suddenly see the following error message whenever I print to my HP printer: "You can't open the application PrinterProxy because PowerPC applications are no longer supported." Now, my document will print, but I can no longer adjust settings. Help??

    PowerPC applications are no longer supported under Lion.  If you can't find Lion drivers on HP's website, you either need to go back to Snow Leopard or start looking for a newer, compatible printer.

  • After upgrading to Lion my videos have a codec error and won't play

    After upgrading to Lion my videos have a codec error and won't play

    Hi waiex,
    I have recently upgraded to Lion and have the same problem as you.  Did you find a solution?
    Thanks in advance.

  • After upgrading to Lion internal mic does not work with Facetime

    After upgrading to Lion internal mic does not work with Facetime.  The mic is picking up sound as noted in System Prefs.  This was working just fine before the updgrade.  Facetime works OK on my iPod. 

    you have in french a tutorial to recreate your partition here
    Rebuild partition with Recovery HD lion after upgrade to 10.7.2
    i tested, it's work !
    For your wifi problem:
    Try to change your setup of wifi, look this table given by apple:
    I changed my wifi setup wep to wpa and it's work !

Maybe you are looking for

  • I recently lost my iPhone, how do i get my contact list from my last back up on iTunes into my android phone in the meantime before i get a new iPhone?

    My iPhone was recently stolen and i had all my contact phone number which i need quite urgently on the spare android phone am using in the in, how do i get my contact list from my last back up on iTunes into my android phone in the meantime before i

  • Problems installing adobe AIR

    I'm having problems installing Adobe AIR. The installer launches two processes but nothing happens after that. I'm using a windows 7 pc. Here is the install log I found: [2010-09-16:16:41:49] Performing runtime update [2010-09-16:16:41:49] UI SWF loa

  • Is there any way to do this:on action event,many times paint?

    now i am designing a gui game like russia, i want to record all the steps of the playing,liks enity[x] up entity[y] down when playser click the button ,I want to replay all the steps,unfornately, the repaint will happen only once. for(int i=0;i<allst

  • Stripping variables for carriage returns

    Hi all, would appreciate any thoughts on this problem...... Using the Show Me ODBC piece as a guide, I've successfully imported a table from an access database. The table comprises three fields [ID], [Question], [Response] which are stored as a varia

  • Logging into forums

    This is an annoying issue that I've run into a few times since I joined last night.  I'll typically browse through the forums when I am not logged in.  When I try to post a new topic, it brings me to a login page.  It accepts my credentials and then