No Airplay after all?
It seems my late 2010 MacBook Air is not compatible with Mountain Lion although its should be, at least if one believes Apple as I foolishly did.
I just found out that the main reason for this upgrade, Airplay, does not function at all (using AppleTV 2).
I would like to know now where can I return this useless upgrade and get a refund?
AirPlay Mirroring
Requires a second-generation Apple TV or later. Supports the following Mac models:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
There are no returns per apple's terms and conditions.
Similar Messages
-
Can't use Airplay after 7.0.2 ATV 3 update!!
I can't use Airplay at all on my upgraded 7.0.2 ATV3. No audio and no video. I can have the picture up and running on the iPad Air 2 or iPhone 6 and try to send it to the ATV 3. I get an "unable to send video" warning on the unit sending the airplay but absolutely nothing on the ATV 3 screen. Then Airplay unchecks the ATV 3 and defaults back to the iPad or iPhone.
Using the same iPad and iPhone, I just tried to use the other non-updated ATV 3 in my den and there was absolutely no problem. I just tried to send something from my Mac Mini to the updated ATV 3 and it wasn't even showing as an airplay option although it was there Friday night! The non-updated ATV is still shown as an option. I've checked the ATV3 settings and nothing has changed. I've forgotten and renewed the network on the ATV 3 and it's testing fine.
Anybody have any clues? I've checked everything I know how to check! The only conclusion I can come to is that the update bricked my Apple TV when it comes to Airplay!.After many starts and restarts, I've finally got it working again. Don't know what caused it to start working again.
Tried to delete/change the original post, but it wouldn't let me edit it! -
Is anyone else having issues with airplay after the Lion update?
Is anyone else having issues with airplay after the Lion update? It sees the libaray but won't connect...
I'm having the same issue. So far all lion has done for me is make all my microsoft office documents un-readable until I upgrade (about $150) and lose my home share capabilities...can anyone assist with this?
-
Is Photoshop CS2 free after all or no joy?
Hello, ive been a long time photoshop user, i believe pre cs2, i imediatelly liked this piece of software since the first day i used it, it was easy to use, intuitive with a set of powerfull features that would speed up my image developments, i used it at school design classes and even 1 month at an ads printing company. At home i could definitly use it to create high quality sprites for my software and since i never really had 850€, once i stumbled across this information you can understand i was thrilled by it, i stumbled accross this info from a fb post, then read some other websites over a google search specyfing the same so i took the plunge and downloaded it.
Now that i came here to triple check, im hinted it might not be free after all, could i please get a definitive answear by someone who works or represents adobe if this piece of software is indeed legal to be used free or not?
Thank you for your time everyone.5. Updates. If the Software is an upgrade or update to a previous version of Adobe software, you must possess a valid license to such previous version in order to use such upgrade or update. After you install such update or upgrade, you may continue to use any such previous version in accordance with its end-user license agreement only if (a) the upgrade or update and all previous versions are installed on the same device, (b) the previous versions or copies thereof are not transferred to another party or device unless all copies of the update or upgrade are also transferred to such party or device and (c) you acknowledge that any obligation Adobe may have to support the previous version(s) may be ended upon the availability of the upgrade or update. No other use of the previous version(s) is permitted after installation of an update or upgrade.Upgrades and updates may be licensed to you by Adobe with additional or different terms.
12. Notice to U.S. Government End Users.
12.1 Commercial Items. The Software and Documentation are "Commercial Item(s)," as that term is defined at 48 C.F.R. Section 2.101, consisting of "Commercial Computer Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. §12.212 or 48 C.F.R. §227.7202, as applicable. Consistent with 48 C.F.R. §12.212 or 48 C.F.R. Sections 227.7202-1 through 227.7202-4, as applicable, the Commercial Computer Software and Commercial Computer Software Documentation are being licensed to U.S. Government end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein. Unpublished-rights reserved under the copyright laws of the United States. Adobe Systems Incorporated, 345 Park Avenue, San Jose, CA 95110-2704, USA.
13. Compliance with Licenses. If you are a business, company or organization, you agree that upon request from Adobe or its authorized representative you will within thirty (30) days fully document and certify that use of any and all Adobe software at the time of the request is in conformity with your valid licenses from Adobe.
what do you think about this ? -
NOT so happy CONCLUSION after all -- Installation of my ZEN Vision M (30 G
Sunday 2/3/06
Let's see, I had a problem with losing my AUDIO. Finally, I had to do a full re-install on my S.B. Audigy 2zs. I even moved it to a different PCI connector on the MB. After a full re-installation... sweet sound again.
As to the Zen itself, I keep having problems.... I am trying to update all the applications (C MediaSourde and C Media explorer) and even there I am finding problems.
When I download the upgrade file to my PC ([color="#ff3300">CMS5_PCAPP_LB_5_0_38.exe), and?try opening it, it HANGS... that's it... so I have not been able to upgrade it. And if I don't upgrade it, then I will have the same erratic behavior will all these applications. They work sometimes and sometimes they don't.
If I really force the issue, opent the explorer and the MediaSource, where I have my "library" of songs... and WHEN the ZEN is recognized by everyone (This is ramdon condition, sometimes yes, many times no), I am able to drag and drop some songs from my "library"?to the ZEN.... but I?still don't have a clear path to do this consistently... ?
Tuesday report 2/26/06:?
[color="#ff0000"](I?don't want anybody to get the ideal all is well now... I thought it was... Yesterday, but not today)
Today I?was able to?to Rip a couple of CDs and "transfer" them to the ZEN. Some of the songs?have noises?though... I don't know what causes that. But the applications are still buggy, they don't work consistently all the time. I just "sense" something is not right with my PC.
[color="#ff0000"]No only that... This installation knocked off my Audio!... even though I have a Creative Sound Blaster Audigy 2zs platinum! (Audio Card)... So I have NO SOUND right now?and therefore I can not use WMP-0 to rip cd's because it tells me I have not audio and I am not in the mood to deal the WMP now. So I had to use the Creative MediaSource 5, to do the ripping and the synchronizing. It did the job ok, except for the noise...
I tried everything to re-install my Audio. Tried the latest dri've...Nothing. Went back to my old one (before this installation) and it DID NOT work either!? Amazing how complicated this has become....
Monday report 2/25/06: I did not do much on the Zen today. But I did notice the WPM 0, still goes crazy (crashed) when trying to find the Zen. The WMP0 crashed today once. Also, there seem to be some conflict among certain programs... It almost seems as if more than one applications is biding for the Zen when they see it. (i.e. if the WMP is open and try opening the Creative Explorer app... it will not open... but only until I close the WMP...then the apps springs up just like that. That's it. - Good night.
I SO, IT seems like I am not out of the woods yet... I wonder if I ever will.
<font face="Times New Roman" size="5" color="#ff3300">?
<font face="Times New Roman" size="5" color="#ff3300">Quick Tips (I see people asking the same questions)
If your ZEN seems "dead" then you need to RESET it. How? insert a "clip" (or other sharp tool. Clip works best) in the hole for RESET, located at the bottom of the ZEN (by the "dongle" connector)<?
Connect your ZEN to a "USB-PORT" (not to a "hub")?A USB-PORT is located on your computer (the box). A "Hub" is a little box connected to one USB-PORTS and it "splits" this port into several USB-Connectors... ideally useful for "devices" that do not required lost of information or current (i.e. mouse, drawing table, keyboard, etc). Devices that required a continuous or heavy amounts of information (i.e. External Hard Dri'ves, Camcorders, Webcams sometimes, required an individual USB-PORT)<?Two things here:?- This link is for the original messagehttp://forums.creative.com/creativel...essage.id=7293?[size="+2"][color="#ff0000"]2- Happy Conclusion installing the ZEN Vision M (30 Gig)<i>(I am writing this for several reasons. Mainly, because it was a difficult installation and I wanted to summarize the 200 or 300 steps/actions I did that led me to solve the problem successfully. I always do this when I have a difficult installation and then I save it for the next time I need it (i.e. changing computers). I certainly don?t want to waste all that effort. One thing I learned about ?technology? is hard to learn it but it can be forgotten so easily, if you don?t take notes.)</i>
<p align="center">---------------------------------------
[size="+2"][color="#ff3300">What was causing the problem?
Two things:
First, problems with Windows and the computer itself.
Second, the Creative applications were horrible at first, they would not open right away and when they did? sometimes 5 or 0 seconds later? they would crash just by clicking on something? and so Windows kept giving me those Error boxes and I kept sending them to Microsoft?(I must have sent at least 00 if not more!) I was also having problems with my graphics, every time an application would crash, then all kind of weird graphics would take place when dragging things around. I also had problems at one time with my Anti-virus/fire-wall Icon going dark after several re-boots, so I had to kick it to get it working?. Oh well, I just want you to get a flavor for how bad things were yesterday.
When I first installed the software, nothing worked!... My computer was noticeably SLOWER and SLUGHISH? Actually I was worry about my computer itself because I have never seen it this bad!... I thought a virus the size of an elephant had gotten into the pc somehow, no kidding so I ran the anti-virus, anti-spy, just to make sure. Sometimes if you firewall is down, you can get viruses in an instant!... I hope you people know this by now. And if the firewall fails and viruses get in, is just at moments like these? when you are trying to get things to work and downloading stuff from the Internet and so on.
The computer was just sloooowww? sluggish?.. and crashy (new word?)?.
I must have rebooted my system from 40 to 50 times, and I am not exaggerating. At some point I even had trouble turning off the PC. There were like three time where it would just sit there in ?limbo? (hung/crashed), so I had to actually switch the?PC OFF on the back of the box, the only way to turn it off? And of course, when you do that, you can be sure you will have all kinds of interesting things when you try to boot up again! (like all kinds of funny displays on my screen, or Windows giving me the ?black screen and white text? asking me to choose a way to boot up, like ?boot up normally? or ?boot up using the last configuration that worked,? (I did this like?7 times all together).
[size="+2"][color="#ff3300">So how did?everything go?from ?so bad? to ?so wonderful?? <i>I don?t really know exactly!</i>
But I suspect three things happened:
- Windows sent me a couple of upgrades (I get them automatically)? I have NO IDEA what they were, but whatever they were, helped!
?2 - As I read and read, things began to come back to my brain. Especially a post reply that gave me the hint (Reformatting the dri've in the Zen) would finally let me ?transfer? my stuff to the Zen
?3 - An lastly, after I have ?cleaned, reformatted the dri've, got rid off the ?firmware? (not a good thing to do), Then I could not make Windows see the ZEN no matter what I did!? I did what worked before (connecting and disconnecting the USB cable from the white adapter (dungle?) connected to the ZEN). Usually when you do this, Windows being a ?plug and play? OS, it usually ?sees? when a new ?device? is plugged in one of the USB ports, or disconnected from a port, as well. In other words it ?recognizes? the device (connectivity) and if the software and driver are already install, the device should come ali've and work! That is the reason you always install the software and drivers first, and usually re-boot the system once, so that when you connect the ?device? (ZEN), it should work!
[size="+2"][color="#ff3300">Let me recap I what happened:
?- I installed the s/w and as I already said, it was horrible.
?2- The Windows updates, somehow were helping a little bit.
?3- I also downloaded the latest updates from Creative.com (downloads/upgrades). I downloaded the ?firmware? (the ?upgrade,? <i>which is the OS=Operating System for the ZEN. Just like ?Windows? is to the PC)</i> and other ?patches? for?the ?creative media source 5? and ?Zencast organizer? (3 updates). I am sure this upgrades helped some, as well.
?4- After trying so many times, I was finally able to open the ?Zen Media Explorer? (Icon looks like a picture of the Zen). When this opens, it shows you everything inside the Zen just like in the ?explorer? (nice). That meant I had connectivity! (good).
?5- Since I had ?connectivity? (access) to the ZEN, My next attempt was to ?transfer? some files down to the ZEN? but this proved impossible!... Somehow, at some?point, by accident (I?did not even notice it)? I was able to transfer ONE song to the ZEN, which gave me hope. After all, if you can do it once, you should be able to do it again. BUT, I couldn?t
?6- Then a nice lady?who responded to my first post, told me she had basically the same problems and the solution was to ?Clean and re-format? the ?Disk dri've?in the ZEN. She said that once she?did that, everything would sort of fall into place? and she was right!
?7- I unplugged the ZEN from the PC and read somewhere how ?to clean, reformat, upgrade or replace the ?firmware,? Not sure still, but it'ss something like ?resetting (with a clip) the Zen and holding the ?power? slide in the ON position? something like that, and that brings a special screen with 4 choices:
Clean<
Reformat dri've (erases everything!), <
Replace firmware (careful here!), <
Reboot. <
Then it'ss pretty easy?to do a lot of ?damage? in a few seconds!... ([color="#ff3300">careful here if you are not used to the sensitivity of the "touch-pad")In my case I did not care since I had not put anything there yet. I erased EVERYTHING!... (not a good thing). I should have been more careful and simply use option 2 (reformat the dri've). Chances are this would have been enough to transfer songs to the ZEN. But since I get crazy when doing stuff like this, I went ahead a cleaned everything.
?8- Then I realized I had erased the ?firmware. As you already know this is the ?heart? of the Zen. (like Windows to the PC). Finally I went to Creative.com/downloads and downloaded it (the full version). But if you remember in #3, I had also downloaded the ?firmware? upgrade as well. The reason this is significant, is, that when I finally recovered ?connectivity? to the ZEN, I? tried both files, but the one that ZEN accepted was the upgrade! (I found this interesting? since I would have thought the full version would have been the correct choice? see?... little things you learn.
?9- As I already gave you a hint in #8, once I had the ?firmware? ready to install, the system kept telling me it could NOT see the ZEN. I connected and disconnected the USB cable several times? rebooted the pc? this helps sometimes, but nothing!... FINALLY, I read somewhere, I should go to the ?device manager? and check what was going on.. ? EUREKA ? indeed I found the ZEN with a ?Yellow mark? on the side, which always means trouble. Basically, I used the ?uninstall? option (based of the principle that simply ?un-installing and installing back something? sometimes this works. In other words, the ZEN was ?stucked. So when I ?removed? It from the ?Device Manager? list (I don?t recall if I rebooted here? but it never hurts!), then all of the sudden? a little icon in Windows (on the small tray=bottom right corner (with the clock and Date),? acknowledged?a new deviced had been connected to Windows. (connectivity back again! Yeahhh).
?0- Now that had ?connectivity? (Big step), I could try installing the ?firmware. And as I already explained, the ?upgrade? was the one that ZEN took. As soon as you clicked on the file, a box opened and asked if you wanted to install the ?firmware. I said yes and voila!... The Zen started accepting it's and when it ended, just like a PC, the ZEN rebooted itself and I was able to see the familiar interface (the same folders as before) but not contents at all? empty!
?- At this?point?I opened the ?Creative Media Source organizer,? went to my ?playlist? and from there, just click and drag some songs and dropped them on top of the Zen Icon (just like dropping files in a folder). And yes, the files were finally ?transferred? to the ZEN. Unplugged the USB cable from the Zen (or the Zen does not play anything). The songs were there and I was FINALLY able to listen to them from the ZEN!... Wonderful. Oh yes, using the same technique (drag and drop), I put a wmv video and was able to watch it as well... Now I know why people rave about the little screen... nice!
?2- In the mean time, without noticing? Just like the nice lady?from the post said, everything seemed to have fallen into place!
?In Summary: The applications ( the creative programs=icons)?were opening normally and quickly now, and many of the errors I got before when clicking on certain things, disappeared. I am sure I will still find some problems here and there, but basically the thing works now the way it is supposed to.
?Just a matter of clicking, dragging and dropping items?into the Zen?.yes, that simple!
?Good luck!
[url="http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=7293">[/url]
Message Edited by em2253 on 2-26-2006:39 AM
Message Edited by em2253 on 2-3-20060:32 AM
Message Edited by em2253 on 2-3-200602:26 PM
Message Edited by em2253 on 0-02-200702:3 AM[url="http://web6.streamhoster.com/em2253/ZEN/ZenDeviceManager.wmv]See Movie[/url]?Hi, take a look at the movie... hopefully I answer to your question is there. [b]Let me know if you can NOT see it... [/b]and I will send you a picture. [color="#ff0000"]and if you can see the movie, give me feedback on it. Did it look ok in your computer? (it changes with all computers depending on your setting and player!). [color="#ff0000"]Was the sound ok?I almost wish I had not titled this post as "Happy Conclusion." It was happy but only a day or two... then I started having other problems... unbelievable. So, If I gave the wrong impression, sorry!
-
Bug Report :
Upgraded to Firefox v10. Holding CTRL+ [F4] too long after all tabs are closed causes error.
"Exc in ev handl: TypeError: this.oPlg.onTabClosed is not a function"What extensions do you have? (Go to Firefox > Customize > Add-ons to see or Help > Troubleshooting info for a copy-pasteable list)
-
Appropriation Request: Status 'In process' after all approvals (IMA11)
Hello,
We are using IMA11 and associated workflow tasks to create and approve a appropriation request. Occasionally, the status of the appropriation request wouldn't change to 'Approved' even after all the approvals. When we look at the corresponding workflow, the status of the task "New status for appropriation requests" would be 'In process'. There would be no error messages shown in the workflow log and there won't be any short dumps.
The same appropriation request, when restarted for the second or third time, would complete without any issues and the status of the appropriation request would change to 'Approved'.
Can someone let me know what could be the reason for occasional failure of the appropriation request workflow?
Thanks,
SuryaHere is another issue for the same workflow approval process.
There are 4 approval levels. Identifying the agent and the approval happens in a loop.
Occasionally, the workitem fails with the message 'Work item XXXXXXXX locked by user XXXXXXX (enqueue error)' The workitem is getting locked by the previous approver. Is there any specific reason for this lock or do I need to add a wait step for each loop?
The approver, approves the workitem from his Business Workplace. I checked other threads, but I am not able to figure out a reason. These are all synchronous processes.
Thanks,
Surya -
even after all night of charging my ipod touch is running out of battery whithin 5 minutes of it being on, why is this?
Try the following to rule out a software problem.:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still that short of life ake an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.
The warranty says that Apple may restrict service of an iPhone to the country of sale, and any reliable salesperson will tell you that if you tell them that you plan to use the iPhone in another country. Such service restrictions are common with cellphones and are by no means limited to Apple's phones.
Sorry, but if your iPhone requires service, you will need to send it to someone you know in the US who can get it serviced and then send it back to you.
Regards. -
I downloaded pics to my pc and after all my music was gone from my phone . I have repeatedly tried to sync to my iTunes but it tells me it cannot be synced to my iPhone. What's going on? Any suggestions?
Yeah everything is gone for good. The apps won't be a problem. You can just redownload them. For the music find a program that copies the music from the iphone to the computer. Then add the files to itunes ans sync.
-
I can't get to download the app store after all the updates. I have version 10.6.8 and there are no more available updates for my operating system.
Look in the HD/Applications folder.
-
I have a ipod touch 5 and when i was loading to my computer i chose to restore my data from my last ipod which did not have a camera. Then after all my music was uploaded i noticed that all the pictures i had taken on my new ipod had been deleted. I think it may be because i chose to restore my last ipod which no photos on it. I was wondering if there is any way to restore my lost photos?
If you backed up the iPod before restoring it then restore from that backup. See the restore topic of:
iOS: How to back up
Also, if yoo have that backup you can extract the photos by:
Recover iPhone, iPad or iPod photos from backups with Picturescue
If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer -
Execution does not end even after all records updated..
Hi,
I have plsql code like :
declare
begin
for x in ( select .......) loop -- about 4000 times
for y in ( select ............) loop -- about 50 times
end loop;
-- some code goes here to manipulate clob data
-- like creating free temp clobs - use - then free them
-- Update statement that update some table using clob values.
insert into tablex values(sysdate);
commit;
end loop;
end;
Here I can monitor from other window howmany records are inserted into tablex and howmany updated in update statement by...
select count(1) from tablex;
After 50 mins i can see that all records are updated but...
plsql code does not end its execution it continues even after all records are updated..untill i have to kill the session or let be run for long time.. :(
I can not understand why this it is not ending execution..
What could be the problem ...Hi,
Here it is.....
declare
v_text_data TableA.text_data%type;
v_clob clob;
type dummyclob_t is table of clob index by binary_integer;
dummyclob dummyclob_t;
v_str varchar2(255) := 'ddfsajfdkeiueimnrmrrttrtr;trtkltwjkltjiu4i5u43iou43i5u4io54urnmlqwmreqwnrewmnrewmreqwnm,rewqnrewqrewqljlkj';
begin
select data bulk collect into dummyclob from sfdl_clob; -- five rows containing clob data upto 1MB
for x in (select object_id
from TableA
where object_type = 'STDTEXT' ) loop
dbms_lob.createtemporary(v_text_data,TRUE);
for y in (select '<IMG "MFI_7579(@CONTROL=' || ref_id || ',REF_ID=' || ref_id || ').@UDV">' temp_data
from TableB
where object_id = x.object_id) loop
v_text_data := v_text_data ||
case
when trunc(dbms_random.value(0,7)) = 0
then chr(10)
else v_str
end ||
y.temp_data;
end loop;
select text_data into v_clob from TableA where object_id = x.object_id for update;
if v_text_data is not null then
dbms_lob.append(v_clob,v_text_data);
end if;
dbms_lob.append(v_clob,dummyclob(trunc(dbms_random.value(1, 6))));
dbms_lob.freetemporary(v_text_data);
insert into xyz values (sysdate);
commit;
end loop;
end;
Thanks for your time..:)
Rushang. -
I just deleted and restored iTunes because I had 4 or 5 of each song. After all that I STILL HAVE 4 or 5 of every song. HOW DO I FIX THIS? Or do I just stop using iTunes?
Since this a potentially drastic approach I will remind you that at this point you ought to have a complete backup of your library in case things get worse rather than better...
Select the Music source, select all (ctrl-a), delete, DO NOT SEND FILES TO THE TRASH!
Repeat with other media sources if you wish.
Import your media, get it organized, backup again.
I can recall if I've sent you in the direction of this information yet...
Here are the typical layouts for the iTunes folders:
In the layout above, with the media folder (everything in the red box) inside the library folder, the library is considered to be portable. A portable library can be moved from one path to another without breaking the links between the library and the media and being self-contained is much easier to backup
... but if you are going to start over I'd recommend you work with iTunes rather than fighting it. If you want your own folder structure for your media (I know I do, but generally recommend people don't because it is less hassle) then turn off the option under Edit > Preferences > Advanced to Keep the iTunes Media folder organized, but place your structure somewhere inside the iTunes media folder. That way you get the advantages mentioned above and are much less likely to create duplicates by accident again in future.
tt2 -
I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!!
iPhone 4S, iOS 5.0.1Try updating to iOS 6.1.3.
Maybe you are looking for
-
How to store iMovies on an external hard drive instead of MAC drive
I purchased an external hard drive and did a time machine back up. I then clicked on iMovie folder and drug them to the Seagate external drive. They copied however they are still on the Mac hard drive? I would like to remove them from the Mac driv
-
Hi experts i have doubt in transports...................
Hi, There are two types of SLD's one is centralized and decentralized so for which we need transports and how to transport the sld objects Thanks in advance Ram vijay
-
Is is possible to upgrade PS 6.01 to PS 7.0.1 without PS 7.0 in between?
I just discovered the update section for PhotoShop at http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows (yes, where have I been hiding???) and update my PS6.0 version to PS6.01 . I was going to proceed to version 7.0 and
-
Camera Profiles and DNG Profile Editor
I saw the lightroom 2.0 eseminar and the presenter mentioned Camera Profiles and the DNG Profile Editor. All I see is ACR4.4 and 4.3. The the FAQ page says I need ACR4.5 and I can't find it and haven't gotten any update notice. Should I just wait for
-
My iPad video screen won't rotate orientation?
iPad screen won't rotate when watching apple movies, still works for other apps etc???