No airport card installed on macbook pro OS 10.6.8

I have been having this issue for some time since Dec 2011. It's as if the card appears for sometime maybe 20mins and maybe 10mins. Then all of a sudden the connection stops. This started after I had left my mac on over night a few times (Literally I fell asleep with it and woke up in the middle of the night and kept on working). Since then it has been giving issues. I tried the Hardware test but it won't boot into it. I also tried restting the SMC but that did't work either. I have been using time machine and it worked once but once again only for a short amonut of time. If anyone is still having this problem please give me a suggestion or just point me in the right direction and I"ll take it from there. I guess .
Thx

Okay, I tried EVERYTHING.
Trust Me.
I even did the downgrading to the 10.6.7 HDA.
HERE IS THE SOLUTION:
YOU WILL NOT NEED TO LOOK ANYWHERE ELSE, IF YOU FOLLOW THESE STEPS:
1. Download and install the 10.6.8 Supplemental Update from Apple (link below).
http://support.apple.com/kb/DL1429
2. Once the update is installed, and the system has restarted, type "Disk Utility" into Spotlight, press enter to launch it, and select your hard drive on the left. Then click "Repair Disk Permissions." (This step may or may not be necessary, but is a good idea in case there are discrepancies from the update).
3. Once the utility is finished, plug in some headphones. Then, press the Option key and click on the speaker icon in the menu bar.
4. Click the Headphones option under the "Output Device" section. You should get sound.
Unplug the headphones and ensure that the audio is not muted. You should now also get sound through your speakers.
THIS WILL WORK. DO NOT MESS WITH VOODOO, etc. I hear that will just cause kernel panics.
If you still have problems, try resetting the PRAM by simply shutting down the computer. Hold Command+Option+P+R before the gray screen appears. Hold it until you hear the tone a second time, then release.

Similar Messages

The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers
    Make sure that Mute is not enabled.
2. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.
6. System Preferences > Sound> Sound Effects
    Play sound effects through:
   Select "Internal speakers" and then back to "Selected sound output device".

Airport card broken on MacBook Pro 2012, alternatives for wifi?

Hello All,
I dropped my MacBook Pro 2012 and immediately it said that Airport Card is not installed, nor Bluetooth. I took it to Apple Service and after they looked at it, they told me the entire logic board will need to be replaced in order to fix it. Obviously I won't be forking out 700 euros for a new one when I can just get a new MacBook eventually, I was just hoping to get a few more months out of it.
My question is can I use a wireless usb adapter to pick up wifi, or an airport express? I bought today a D-Link Wireless adapter usb and it is not installing for some reason. I have IOS X Mavericks 10.9.5 If I use the Airport Express how do I go about setting this up?
Thanks for any help, I am fairly confused at this point!

You need to buy a USB wireless that is Mac compatible.. and it must have drivers available for Mavericks.. not just Mac compatible.. It is not easy to find them but look on ebay.. just search usb wireless mac.
You must double check though.. DWA-125 proclaims itself as mac compatible.. that means.
(Mac OS X, 10.4.X, 10.5.X, 10.6.X)
Mavericks made a big jump as did Lion and apparently so does Yosemite.. do don't expect drivers will jump out at you. I have tried lots of USB sticks and they seldom work.
Many companies lie.. or bend the truth and they say Mac compatible and mean.. up to snow leopard.
or an airport express?
Yes, you can use an express.. but not by USB.. that means on a MBPr you will need to buy a Thunderbolt to ethernet adapter (forget the USB one.. it is 2.0 useless junk).. as well as the express and setup the express as wireless bridge. This is great for a static computer.. but rather less than portable.
I think it is such a shame we lost the old Express port.. PCMCIA as it was in earlier days.. it was great for this sort of thing.. and was better as it actually connects to the main bus in the computer..
Otherwise move up your new computer replacement date.

Macbook pro"No Airport Card Installed"

So my macbook pro has a grocery list of problems wrong with it, it constantly freezes and shuts down on me and it has a really hard time picking up wireless internet no matter where I am. Also part of the back of it is broken (from being in the car when I was in an accident) But the guys at the apple store say that is just more of a cosmetic issue and it shouldn't hurt how it works. But it has been getting worse every day and in this past week it has been shutting down and freezing more than ever, sometimes I have to even take the battery out in order to shut it down when it freezes. But yesterday when I opened it up it read "no airport card installed", so I got on the phone with a guy I know who knows everything there is to know about macs and he told me to go under system preferences and delete my airport then restart my computer to reset the PRAM and then add another airport under system preferences I did and that worked perfectly last night and restored everything back to normal. Then this morning it did the same thing so I reset the PRAM again and it worked(which I had to do mulitple times whenever I would open my laptop back up)but then this last time it didn't work. And I cant find the airport anywhere under system preferences/network. I've ran disk utility and repaired disk permissions and nothing has worked. I'm out of town right now but I plan on taking it into the apple store as soon as I get back.

I should clarify ... I had this same problem on the old drive but only after restarting from boot camp. But an old platter hard drive is simply too slow to bother with boot camp for my needs, so I just went back to OS X only.
It hasn't been an issue since last Christmas when I first noticed it. Since then, I've had every single part of this Macbook Pro replaced except for the battery, battery cover, and back panel plate. Some components were replaced multiple times. But it's not been a problem because I haven't been using boot camp.
I really don't see how it could be a hardware issue when it only happens during restarts, not during cold boots ... and only happens going from Windows to OS X, not the other way. Could be something in a hardware check from cold boot that doesn't happen on a soft reset.
Other people seem to be having issues with their airport cards not being recognized for a variety of reasons. I suspect it's something an update will cure. Or it'll just be like a variety of other minor bugs which Apple hasn't bothered to fix yet (like the keyboard backlight not switching off under bootcamp, etc).
Thanks for testing it out on your systems. Was just curious if anyone else had seen the problem.

Installing airport extreme card in a macbook pro

need help replacing the airport extreme card in my macbook pro. need details on how to do it

Without an airport extreme card, there won't be any Wifi signals going to and from the router (unless you have your machine hooked up via ethernet cable, in which case you don't need an airport card because the signal is transmitted through the cable). Most Macs have a card installed - which Mac do you have?

My sister's macbook cant connect to wifi. It said that "no airport card installed". What should we do?

My sister's macbook cant connect to wifi. It said that "no airport card installed". What should we do?
Help us to solve this problem.

Depends on whether or not the machine is under warranty or not. If it is, just take it to an applestore and let them worry about it. If not, your airport card may have failed and may need to be replaced. It could also be that the card needs to be reseated, which is what I would check first. Look for a guide at ifixit.com.

How to install the airport card to my macbook?, How to install the airport card to my macbook?

One time when i was browsing using my macbook, it suddenly hanged. I waited for several minutes for it to return to its normal function to no avail. What i did was removed the battery then switched it on again. It worked again. But could not access the wifi anymore. When i clicked the wifi icon, it says, no airport card installed. What should i do?

I'm guessing there is a language issue here. The graphics card is the actual hardware (chip) in your computer that allows it to create graphics and show them on your display. There is no way to disable the graphics card on your Air because there would be no way to use it (it would not be able to display anything on any display). This is a little different on machines with multiple graphics processors, but that's not the case with your Air. I'd imagine you know what you want to do, we're just having trouble understanding your question.

HT3728 What do I do when my MacBook Air's airport suddenly says "No Airport card installed"?

My MacBook air is suddenly saying " no airport card installed" don't know what to do, pls help

if you get the answer plaes send it along same thing happened to me and I tried every reset and nothing worked
e mail me at [email protected]
thanks

HT1338 my mac book pro now says "no airport card installed "which is weird since I always had airport for the last year?Help?

I get the message "No airport card installed "on my mac book pro even though I've been using it for a year? Help anyone

It's still working right?
You can choose to run through this list of fixes
Step by Step to fix your Mac
I suspect the OnyX routine is going to show promise if a corrupt cache file is responsible.

Macbook no airport card installed, macbook no airport card installed

my Macbook says no Airport card installed?

Thanks for your post, and welcome to the Apple Support Communities.
Resetting the following may help the issue:
OS X Mountain Lion: Reset your computer’s PRAM
http://support.apple.com/kb/PH11243
Note: Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Thanks,
Matt M.

Upgrading to a 802.11n Airport Express Card in my Macbook Pro

I found this question on the forums answered over 4 years ago and thought to ask it to get a more current response given that both hardware and sellers have changed significantly in the time passed.
I've also found it difficult to replace the wireless card in my Macbook Pro. I was able to track down the current part number in my device as being 661-3890; but I figure it may be better just to upgrade to an 802.11n compatible card. I've found a few listings on ebay but they are not straight forward. I want to make sure that anything I might buy is at least compatible with my computer.
A creditable site, OWC, has a part number 661-5048 they sell that is compatible but is on the upper end of the price spectrum. I have the A1150 Macbook Pro (1,1) which I believe is also referred to as the late 2006/early 2007 model. In my research I was able to deduce that some people have had success replacing their cards with the Atheros AR5BXB6 card although there appears to be some debate regarding the different Manufacture Part numbers (482261-001 and 482261-002). There are a few of these listed on auctions (used and new) but the range in price is $100.
I'm new to the Mac screen and would appreciate any help in the right direction as I have yet to find an authority that confidently and clearly states what cards are compatible with my box. Thanks!

Here is the ifixit link:
www.ifixit.com/MacBook-Parts/MacBook-802-11n-Airport-Extreme-Card/IF185-038
I just want to know what cards are compatiable so I can pick up a reasonblily priced one on ebay.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro1,1
Processor Name:          Intel Core Duo
Processor Speed:          2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          2 MB
Memory:          2 GB
Bus Speed:          667 MHz
Boot ROM Version:          MBP11.0055.B08
SMC Version (system):          1.2f10
Sudden Motion Sensor:
State:          Enabled
Software Versions:
Menu Extra:          6.2.1 (621.1)
configd plug-in:          6.2.4 (624.2)
System Profiler:          6.0 (600.9)
Network Preference:          6.2.1 (621.1)
AirPort Utility:          5.5.2 (552.11)
IO80211 Family:          3.1.4 (314.1.1)
Interfaces:
en1:
Card Type:          AirPort Extreme (0x168C, 0x86)
Firmware Version:          Atheros 5424: 2.1.14.5
Locale:          FCC
Country Code:
Supported PHY Modes:          802.11 a/b/g
Supported Channels:          1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165

MacBook says no airport card install suddenly

My MacBook suddenly lost wifi connection and says that no airport card installed. How can I reinstall the card?

There are a couple of things you can try to get your AirPort card working again.
Reset the Parameter RAM - http://support.apple.com/kb/PH11243
Reset the System Management Controller - http://support.apple.com/kb/HT3964
If neither of those works, you probably have a dead AirPort.
Contact Apple using www.apple.com/support/contact if you are in a country that supports it or call the appropriate phone number on this page. Alternatively carry the MacBook in to an Apple retail store or service provider to ask for an estimate.
Best of luck.

Mac Pro with no airport card installed

I have a Mac Pro with no airport card installed....Can I just purchase an Airport express and connect by ethernet to the Mac pro.... I use Air port Extreme as my router for other computers

Yes, this is referred to as a ProxySTA in the business.
HOWEVER, this only became available with the 802.11n Express. I haven't yet seen it OFFICIAL if the new second generation still supports ProxySTA. I'm a bit hesitant to say yes, because the new express leans a little closer to the Extremes which work quite differently. (haven't had time to test this yet myself)
I'm curious, why you don't just run an ethernet from your extreme to your Pro... I'm guessing because of the distance?

"No airport card installed" only in swedish mode?

Hi all, got this problem with my Macbook pro!
Recently when I was reconfiguring my wifi-network (assigning my time capsule as main router and the modem I got from my ISP as a "bridge"), I noticed that my airport card was acting strange.
The problem is that it says "No airport card installed", but I still got internet connection and can surf/download stuff without a problem. Also, when I go into "System preferences/Network" I can see my airport connection and turn it on/off. Although when I click "Advanced" nothing happens.
I've tried several things but none seems to work, and I'm not sure its an hardware issue. Anyway, this is what I've tried:
1. Rebooting (several times) = Didn't work
2. Resetting PRAM and NVRAM = Didn't work
3. SMC-reset = Didn't work
4. Rebooting into Windows XP via bootcamp = Airport card detected and working just fine
5. Restoring older save via time capsule = Didn't work
6. Format and reinstall Snow leopard and restore older save via time capsule = Didn't work
7. Format and reinstall Snow leopard (again) = Didn't work...-ish?
Now, here's the strange bit. As I log in to a new account with english as main language I notice that the wifi-icon on the top dashboard now is filled (it was greyed out and only said "No airport card installed [in swedish ofc]) and I can now click it, change network and all that stuff. Although, when I go to "System preferences/Language & text" and change my preferred language to swedish and log out & in, the same problem occurs (greyed out wifi-logo, no airport card installed etc.)
So, I'm totally confused. Halp?

Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If that doesn't help Reinstall the OS.
If that doesn't do it, the card has likely died.

"No Airport card installed" after 10.5.8 update

Just upgraded the latest Leopard update 10.5.8 and, after restart, the Airport icon in my menu bar says "No Airport card installed".
I've been into System Prefs and tried to switch it on, but nothing. I've even been into the system profiler and, when I look under Network > Airport card it says no information found.
I'm on a two-week-old 13" MacBook Pro, which has been working fine with its Time Capsule since it was bought.
Cheers in advance.

HI,
Try the 10.5.8 combo update available here.
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
As with any installation, repair disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

No airport card installed on macbook pro OS 10.6.8

Similar Messages

Maybe you are looking for