No airports shown in the airport admin tool since Lion... any hints?

After i installed Lion i had to check sth in my airport admin tool. But no airports were found there. I checked the LED at my TC but it's green.

Jze,
Check if you had the roles to deploy the applications.
http://help.sap.com/saphelp_nw73/helpdata/en/76/0b7e9619a7430b95d56edb969cf60a/content.htm
Also, under Deployement, check Deploying Applications
http://help.sap.com/saphelp_nw73/helpdata/en/5d/43050b08ff42a796b2e466f4210ee0/frameset.htm
Hope this helps.
Cheers!
Sandeep Tudumu

Similar Messages

HT1339 My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

Time to replace it: $49 2nd Gen shuffle at online Apple Store...

Unable to find the Visual Admin Tool Nw 7.3 Ehp1

Hi Experts,
We have Installed the Portal System (NW 7.3 Ehp 1) in that we are unable to find the visual admin Tool in the path drive:\usr\sap\\J00\j2ee. Can you please suggest me how to rectify the error..
Thanks in Advance...
Regards,
Krishna.M

Dear Krishna,
Visual admin is no longer supported in NW 7.3. Please find the below link to see all the changes in NW 7.3:
Nice Blog For All the changes in NW 7.3
Hope its helpful.
Regards,
Deeraj Shetty

Admin tools on Lion to Snow Leopard Server on Mini

I recently purchased a MacMini Server with Snow Leopard Server and have everything working fine - except when I went to install the Server Admin tools on my Lion laptop - it would not let me! How do I manage my server? Currently, I have been using screen sharing to do everything - not the most efficient way - but I have my server up and running.
If I got the Remote Desktop on my Lion laptop, would that help me manage my server - just want to know, before I go and buy it.
Thanks,
-- Nash

I believe you can only use 10.6 Server Admin tools with 10.6 OS.
With Lion OS, you can only install Lion Server Admin tools: http://support.apple.com/kb/DL1419 - however, this may perhaps worth with 10.6 Server, although I haven't tested, but it may be worth a shot.
Apple Remote Desktop is not going to help you much in what you're trying to achieve - it is not designed to replace Server Admin tools, it has a completely different function. It simply allows you a convient way to do screen sharing, copying files, executing unix commands - all of which can really be done through the built in screen sharing applications or via ssh in Terminal.
Apple Remote Desktop will not allow you to directly change DNS, Mail, etc. settings. It will only allow you to get onto your server's screen where you can open Server Admin tools and change the settings directly on the server - no different from screen sharing.

Where is airport admin utility for lion

There does not seem to be an airport admin utility for airport extreme, I only have the airport utililty that doesn't seem to allow any setup changes. It also does not give options for set up changes when there is no green light for the base station.

Hi - to get the full featured Airport Utility 5.6 for Lion, go to the following link for the download - you can keep 6.1 and 5.6 on your computer.
http://support.apple.com/kb/DL1482
Use it to configure the Extreme when you have problems.
Charlie

Unable to Open the OBIEE Admin Tool (RPD) 10.1.3.4.2 after Installation

Hi,
I have installed obiee 10g (10.1.3.4.2) in windows server 2008. After installing, when I tried to open the Admintool it is giving me the below error.
The application has failed to start because its side by side configuration is incorrect. Please see the application event log or use the command-line sxtrace.exe tool for more details
Restarting the machine also does not work. Presentation Services were not started. When tried to start the services, it is throwing error like asking to check the system log. Is this stopping Admin tool to open..?
What could be the wrong with presentation services. I havent changed anything. I have reinstalled and restarted the machine, still same problem
Please help...
Thanks in advance

HI,
I see there are totally 3 programs listed with the naming convention --
"'MS VC++ 2005 Redistributable(x64)"
"'MS VC++ 2008 Redistributable(x64) x86 9.0.30729.4148"
"'MS VC++ 2008 Redistributable(x86) x86 9.0.30729.4148"
I am not sure which one to uninstall and reinstall out of these listed programs.
Is this causing the issue to display error while opening the Admin tool ?
Please help with your inputs
Thanks

What's up with the Server Admin Tools update 10.3.5?

I keep getting the Apple update window with Server Admin Tools Update 10.3.5 checked off in its checkbox.
When I run the installation, it goes throught the status bar, etc, and then comes back up as needing installation.
The tools I run show 10.3 (v106) in the about window.
What's up?
thanx

Cliff, I am not sure why you are getting this update, but if you are not using Apples' Server and you are not that Servers System Administrator, Uncheck it and ignore it, you do not need it.
If by chance somewhere along the line you downloaded software that was not through the Software Update feature on your computer, you might have mistakenly downloaded some software you did not need.
Don

Rights & authorizations on the Visual admin tool SP13

if some one can tell me if rights and authorizations can be managed around the Visual administrator tool in order to manage accesses and users use and this tool.
Thanks in advance,
Eric.

Hi Daniel,
yes agree with you and thank; but what i want to know is if i can assign other "group" (rights and / or authorizations) to some users in order to avoid access to this tool to users except in visualisation that means without possibility of modify items.
Eric.

Is anyone having trouble with the cursor jumping around since Lion was installed on your computer? Never happened until Lion.

Is anyone having trouble with the cursor jumping around while typing since you installed Lion? Never had any problems of that sort prior to Lion. I have an older machine. I believe it is a 2008 MacBook Pro. Especially happens with Yahoo. I am baffled.

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Upgrade The OBIEE Admin Tool...

Hi All,
My OBIEE update to 11.1.1.6.0 To 11.1.1.6.4 In Server.
In my Local Machine Also I want Upgrade Client Tools 6.0 to 11.1.1.6.4.Let Me Know Which Patch I download And Apply.
Please Can Provide Any Document How To Apply Patches.we are usering windows7-32bit.
Thanks,

Check this
http://askjohnobiee.blogspot.com/2012/10/how-to-apply-obiee-11g-bundle-patch-set.html
If helps pls mark as correct

I don't get the radio feature in music. Any hints?

It seemed interesting at first, but...
Actually I don't get it. Every time I go back to a station it plays the same songs over and over again. And if I skip to the next song it seems like there are only five or six songs in the station. Hmm...
What am I missing?
Thanks,
Doug

With a live radio station, if you don't like what they are playing on one station, you can go to another, and then return later on to the first station and hear a different song - whatever they are playing then.
But with this radio feature you must finish listening to the last song on a station before you can go on and hear the next song. You get stuck in a sort of "eternal song purgatory."
Rather annoying.
doug

How can I get AirPort Admin Utility for Graphite and Snow 4.2.5 to work with OS10.6?

I've upgraded to the latest version of Mac OS and now AirPort Admin Utility for Graphite and Snow 4.2.5 won't run. Any suggestions on how to either run this utility or otherwise get access to my old Snow Dual Airport via another method? Airport Utility doesn't see the device, despite repeated scans. My computer and iPad connect no problem to the device, but both iPod and iPhone won't take and hold an IP address. (If any one can help me solve this issue, I can live without access the Airport.)
Thanks,

I've upgraded to the latest version of Mac OS and now AirPort Admin Utility for Graphite and Snow 4.2.5 won't run. Any suggestions on how to either run this utility or otherwise get access to my old Snow Dual Airport via another method?
Unfortunately, you will need another Mac running a much earlier version of OS X to be able to install AirPort Admin Utility and make any settings chances to the router.
Since the normal life of a wireless router is around 5-6 years of use, now might be the time to consider a new router that will provide far better performance than the older Graphite/Snow AirPort.

SSO between Portal Application and Portal Admin Tool

Hi All,
We have a requirement for implementing SSO between a Portal application and
Portal admin tool.
We are using WL Portal 8.1 SP4.
Here is the reason for this requirement -
A user logged-into Portal Application needs to login to Portal Admin tool to
do some admin activity. We want to provide a link in the portal application
using which the user can directly login to the Portal Admin tool without
having to enter the credentials again.
If someone has any info on how to implement this, can you please point me in
the right direction.
Thanks,
~Deepak

Hi,
When creating PP you have 2 options
PP used for compiling and PP used for Building
You create PP with all the libraries into Developing/Compiling Other DCs
And another PP with all the libraries into can be packaged into other build results (SDAs).
Once you have these 2 PP in place you add the DC as used DC.
And this should resolve the issue.
Hope this helps.
Cheers-
Pramod

Xserve RAID Admin Tool 1.5.1 not quite working

I have an Xserve RAID that's currently at firmware 1.3.2/1.26a according to Xserve RAID Admin Tool 1.5.1. However, when I try to upgrade the firmware to 1.5.1 via the RAID Admin Tool 1.5.1, it just doesn't do anything--it accepts the .xfb file and then...nothing. Quitting out of the the Admin Tool and restarting still shows the firmware at 1.3.2/1.26a. Same thing if I shut down and restart the Xserve RAID from the RAID Admin tool. Any tips? There's nothing stored on the RAID system yet (the array hasn't even been created--it's a blank system) and nothing is attached to it either (I've just plugged in the ethernet links to format it first before I start attaching an Xserve G5 to it). Also, even though the lower controller is showing green and I have an ethernet cable plugged into it, I can't get any info out of it nor can I configure it with an IP address. Only the top controller seems to allow some configuration such as IP address.

Okay, I've solved the problem.
Basically, the issue was that the lower controller wasn't seated right despite it showing a green light in RAID Admin. When I went to visually inspect it, I noticed that despite what RAID Admin 1.5.1 claimed, its light wasn't even on, let alone green. And since the lower controller handles slots 8-14 of an Xserve RAID and my slots 8-14 are totally unpopulated (empty) at the moment, it was never noticed. Now that I've reseated the lower controller, everything is visually showing green across the board and the firmware upgrade is proceeding as expected and it has upgraded the firmware from 1.3.2/1.26a to 1.5.1/1.5.1c complete with autorestart of both upper and lower controller modules.
Basic lesson learned: RAID Admin lies. If possible, visually inspect the box itself!
Thanks to all who responded.

Lion server VPN + Server Admin Tools 10.7

Hi,
I followed this guide http://macminicolo.net/lionservervpn to try to set up VPN on my lion mac mini server.
I also used Server Admin Tools 10.7 as instructed in the guide.
After completing the steps in the guide, I cannot get VPN to work, plus I have extra problems as below:
my mini cannot connected to the Internet or local network shares. I found under "Network" setting there was extra VLan created by the system automatically showing as "System Test--Connection error". After I delete this extra connection and revert my Ethernet to its original settings I can connect to the Internet again.
Server Admin Tools 10.7 seem to retains all its settings from the guide on NAT, Firewall etc. doesn't matter if I had removed the current server and created a new server in the left pane. Is there anyway I can restore the Server Admin Tools to its programme defaults? I suspect these settings are affecting my networks and I cannot get rid of them completely.
Would VPN still work if I just set it up in the server app? I haven't been able to get it work this way. I also want to find out is your guide for using the VPN to connect to the Internet off the server as a way to bypass restrictions? Do I have to set it up this way as the guide if I just to want to set up a VPN for simple fireshareing?
What did this command in the guide do to my mini? I was hopping if I cannot get VPN to work, then I should at least reverse the effects of this command. How do I undo this command please? "sudo serveradmin settings vpn:Servers:com.apple.ppp.l2tp:DNS:OfferedServerAddresses:_array_index:0 = "192.168.2.1"

Thanks BrianFL. This helps hugely. Yes, I just to set up a simple filesharing VPN not the kind of VPN that bypass Internet censorship. I use ethernet connection directly from my router yes.
1. I just need to use the server app to set up a VPN and port forwarding. That is it?
2. The setting I have made according to the guide with Server Admin Tools seems never going away, even after I deleted the server that has all the settings inside Server Admin Tools. Upon creating a new server inside Server Admin Tools, the new server inherits all the settings from the one I just deleted. Any idea how I can restore to Server Admin Tools's defaults settings?
3. Even VNC (I use RealVNC) on the mini stopped working after I made changes according to the guide and deleted all the changes I can find. What is the address format for lion's build in VNC (192.168.0.100:5800?) like? I forgot how it is.
Thanks so much!

No airports shown in the airport admin tool since Lion... any hints?

Similar Messages

Maybe you are looking for