No Alerts in SDP94

Hi All,
for our snp planning we are using different db alerts. Now I have the problem, that I get the error message "No alerts exist for your selection", if I´m execute the alert monitor directly from the planning book.
If I´m execute the alert monitor from the snp-planning grid, I select a locationproduct, load the data into the planning grid and use the alert selection "Alerts for current selection".
Moreover a alert profile is assigned to the user settings.
When I´m execute the alert monitor with Tran.: /SAPAPO/AMON1 I didn´t receive any error message while I´m using the same alert profile with the same selection ID as in the snp planning grid.
The only change we have been made ​​in the last weeks, is that we have create a additional planning view to the planning book.
Have anybody of you an idea, why the alert will not be displayed in the snp planning grid and how I can solve the issue?
Many thanks
Edited by:

Maike,
I will assume that you mean SNP94, since this is where you would display SNP books.
It sounds like you are saying that you don't get an alert when you execute the Macro within the book, and you don't get an alert when you use //AMON1.  Maybe there aren't any alerts to display?
Best regards,
DB49

Similar Messages

  • Questions on Alert monitor

    Hi,
           I have few questions on alert monitor.
    1. If we create an alert and have it as default macro, does it display in interactive planning book without a alert profile assignment? or should we assign an alert profile to see alerts in planning book. I remember that we just need alert profile if we need to check the alerts in a separate screen for our convenience.
    2. Is alert profile assignment specific to a user? If that's so, then how we assign different profiles to different users? any transaction? or are they specific to a selection or planning book or version?
    3. In Application specific alert profile, in SDP tab, under "SDP - Database Macro Alerts", I see few alerts types apart from standard ones. These were actually our previous alert macros. How did they get created like a alert type?
    4. I created a simple macro with change color of cell to red if a condition is satisfied. Also raise an alert for that and assigned it to default. When I go back to the SDP94 screen and run the macro, my cells are highlighted as red whenever the condition is satisfied but when I click on the alerts icons, I get a blue information message "No alerts exist for your selection". When I click on the icon, it gives me a window saying " Internal error analyzing SDP alert".
    Can somebody help me understand what's going wrong?
    Thanks.

    I think you can select that standard type.
    However since it was SAP delivered, we chose not to, and instead created more line items in SPRO with text such as "Alert Message 1" etc. We created numbers ranging from 9001 to 9010. While defining the custom alert, under alert type, it showed up these numbers that were setup in SPRO. I would assume that just like you pick up 9001, you should be able to pick up 4100 or 4101 (alert type numbers) which is the standard status alert. If you run out of the numbers, you would definitely need to add more in SPRO settings. Remember the alert text is picked from SPRO, where you can change and make it more meaningful so that users can do sorting on those alerts.

  • Assign PP/DS Alerts to Users (Alerts Monitor)

    HI Gurus,
    I have configured Overall Profiles for Alert Determination in the Background using PP/DS alerts. Is there a way i can automaticall assign this alert to other users? Or the users should just assign it to themselves?
    Thanks in advance!
    Nap

    In /SAPAPO/AMON1 - Alert Monitor  click on Favourite Management.
    Select the user from Favorites for User and than assign alert profile according to user role.
    Hope you have activated alert in IMG : Alert Monitor->Activate/Deactivate Applications in Alert Monitor.
    Alerts are shown in interactive planning (/SAPAPO/SDP94) but not in alert monitor standalone (/SAPAPO/AMON1): In interactive planning, whatever what selection profile you use to load the data in the planning book, the alerts are found since the system considers just the data as loaded in the planning book. However, in alert monitor standalone, the selection id defined in the alert profile plays a big role. The alerts will be shown depending on the objects defined in the selection id and the aggregation level defined in the job when generating the DB alerts. For instance, in case of resource, it is strictly necessary to use a selection id that has resources only. If the selection id contains also locations for instance, the system tries to find alerts linked to the location resource for which for which there are none because the alerts are on the resource level only.
    Alerts are generated but cannot be displayed in ALV grid: Check if there is a filter criterium in the layout which doesn't match with the existing alerts.
    By scheduling the program /SAPAPO/READ_ALERTS_BATCH , you can determine and save dynamic & existing DB  alert situations.
    Configuring Overall Profiles for Alert Determination in the Background  to use above program to generate alert.
    transaction /SAPAPO/AMON_SETTING) go in menu bar -> Goto -> Alert Determination in the Background
    Hope it will be helpful to you .
    Manish

  • How many alert profiles needed?

    I a user that uses two planning books, PB1 and PB2 with corresponding data views D1 and D2 respectively. I have alerts in both the books.
    Now how many overall profiles do I need and how many individual alert profiles do I need?
    I am thinking 1 over all profile and 2 alert profiles but the assignment in SDP94 per user seems to be unique. Is one alert profile and 1 overall profile enough?
    Thanks.

    Hi,
    I assume both planning books are assigned to the same planning area. The idea of having different planning books is when you have different users accessing data from the same planning area. If it is just one user, then it is recommended you maintain a single planning book for that user & define 2 data views within that planning book rather than have the user access data from 2 different planning books.
    Assignment of SDP profile to planning book is unique. i.e You can assign only one planning book to a SDP profile. Also, you cannot maintain 2 entries for a given user/planning area while assigning alert profiles to user.
    My suggestion is maintain a single planning book per user, create 2 data views, maintain a single alert SDP profile, assign the planning book & data views to it.
    regards,
    Srinidhi

  • Filename in an alert message

    Hi Friends,
    I am doing a simple file to idoc scenario.
    if mapping error occurs.
    the requirement is to trigger an alert which says "A mapping error occurred when processing the file XYZ.txt"
    Constraints are:
    1. BPM is not used as it is a simple scenario.
    2.RFC lookup during mapping is to be avoided since if mapping itself fails then it will be of no use.
    Is there a way/work around to get the filename dynamically in the alert message.
    Thank you,

    Seems to be not possible without a BPM.....at least by using a standard alert procdure
    Using a mapping get the FileName .....have both the source and target message as the same.....
    map the FileName to some empty node of the structure.
    In the mapping logic, one for which you want to check for any exception, do not make use of the node containing the FIleName...let the rest mapping remain as is
    Create a Container Variable and Assign the node containing the FileName to it using a Container Operation.
    Then raise the Alert.
    I have used a similar approach in one of my interfaces.
    Regards,
    Abhishek.

  • Alert is not getting displayed in Alert Inbox

    Hi,
    We have created a BPM with an Alert. The Alert is getting triggered in the PE but we are not able to see the alert in the alert inbox. It is neither being displayed in ALRTDISP transaction.
    We have already subcribed that alert.

    Hi,
    Have to scheduled the background job SXMSALERT_PROCESS_DATA_GET to collect the alert message for further processing?
    check this link,
    http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
    thanks,
    sasi

  • The expression is not being displayed in the alert inbox

    Hi,
    I have created an expression in 'Long and Short Text' tab present in the ALRTCATDEF transaction screen.
    The expression is "test Error in message &SXMS_MSG_GUID&". However if i goto alert inbox, this expression is not getting displayed. I tried putting this expression under Message title, Short text and Long text tabs. But no change in the result.
    In the above expression, SXMS_MSG_GUID is a container variable declared in ALRTCATDEF transaction screen.
    Same is the situation irrespective of the container variable being used - SXMS_ERROR_CAT etc.,
    I appreciate your early response.
    Regards
    Ganesh

    Hi Venkat,
    Without using BPM, you can think/try out with triggering an alert from UDF:
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    Otherwise, you can use email functionality to notify the error message rather an alert....so that you can customize your output format/or error message required.
    Also check out this Michal's blog on ALERT Configuration..
    /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
    Hope this wull help.
    Nilesh

  • Alert or Notification for Client Open and Close

    Hi All,
    How to configure an Alert or Notification, if the Client (SCC4 and SE06) is open and in modifiable state, we have spoken to our solman team and got the confirmation that there is no MT Class for SCC4 and SE06.
    If this is possible through any z program, please do help and provide your comments and suggestions.
    Thanks & Regards
    Praveen

    It is possible to assign a different posting period variant to company code in a non-leading ledgers (the extreme right field) in the foll. node in SPRO.
    Financial Accounting (New) -> Financial Accounting Global Settings (New) -> Ledgers -> Ledger -> Define and Activate Non-Leading Ledgers

  • Is there a way of getting a list of upcoming alerts/alarms and their times?

    I'd like to get a list of alert times, so that I can see if I have any that will be going off in the middle of the night!
    Many months back, I purged those pesky midnight alerts by scrolling through week by week and looking for the all-day events and checking each one. It was a chore.
    Now, due an odd synching issue between iCal and an app, I'm a tad concerned that some late night alerts may have been set, or PMs may have changed to AMs, or other oddities introduced. I'd like to scan a list of alerts for the next several months to ensure that none are set to go off during the sleeping hours!
    Just browsing events (say week by week) doesn't help me because they could have alerts set for all sorts of different times (or no alerts at all). If there isn't a way of listing the alerts, then I'll have to go through each individual event/to do to check its alert and time-- and there are hundreds!
    Hope this makes sense.

    Try this in Script Editor - the list of alarms will be in the result pane.
    AK
    click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">tell application "iCal"
    set Alarming to ""
    set MyCalendars to every calendar where writable of it is true
    repeat with ThisCal in MyCalendars
    set MyEvents to events of ThisCal
    repeat with ThisEvent in MyEvents
    repeat with ThisAlarm in (display alarms of ThisEvent) & (sound alarms of ThisEvent)
    set AlarmTime to (start date of ThisEvent) + (trigger interval of ThisAlarm)
    set GotOne to ((name of ThisCal) & ": " & (summary of ThisEvent) & ": " & (start date of ThisEvent as string) & " alarm " & trigger interval of ThisAlarm as string) & " minutes."
    set Alarming to Alarming & GotOne & return
    end repeat
    end repeat
    end repeat
    end tell
    Alarming
    </pre>

  • How to change default alerts in iCal?

    Hello.
    Every time you add a new event in iCal, the Info panel of the event contains a series of default alerts that you may want to add to it. However, all of them are useless to me (e.g.: "Send email to <my address> 4 days after), so I need to manually edit them event by event. Anybody knows how to change them? I have already inspected all the plist files related to ical, and looked inside the ical package content, but I found no indication of where to change these values. Using iCal version 5.0.2
    Thanks,
    l

    John: Thank you, this is exactly what I wanted. I was indeed inspecting the plist with bbedit, but what I did not realize is that the file has some parts which are binary, so I could not see the PersistentMenu-lastUsedAlarms part by using a text editor. I opened it with Xcode and I did find what you were saying, and erased all the junk that was in there. In fact, the issue I had was also described here:
    http://newsgroups.derkeiler.com/Archive/Uk/uk.comp.sys.mac/2010-06/msg02349.html
    For some reason, it looks like after some upgrade the program adds were some positive values in the plist and I was stuck with default alarms that were set *after* the events I wanted to set an alarm for.
    I did what you suggested, then added by hand new values to the PersistentMenu part of the plist, and I am now happy.
    For everybody's information, to know what I did, it is enough to know to add Dictionary items to the  PersistentMenu-lastUsedAlarms, with 3 fields:
    -- AlarmTypeKey (this determines if you want a sound, or else an email, or else the other default alarm type keys. For example, sending an email is a Number, value 4; having a message with sound is a Number, value 3)
    -- AlarmDurationKey: This is a Number, in seconds, that determines when you want your alarm to trigger. E.g: -172800 will be two days before. Must be negative for "before", of course)
    -- AlarmParameterKey: This is a String, where you store the value that you want the alarm to have. For example, if you want an email to be sent, the AlarmTypeKey will be 4, as explained above, and this field will contain your email address. Instead, if you want the alarm to be a sound, the AlarmTypeKey will be 3 and this field will have the name of the sound you want (e.g., Basso).
    That's it. Thanks a lot for the solution!
    l.

  • Why is ical creating unwanted alerts for all-day events?

    If anyone can point to what might be going wrong here I'd be grateful. This is becoming a daily irritant. I have a number of all-day events listed for most week days in my diary which help me to know what is happening that day with childcare for my son. I don't need alerts to be reminded of these - they are just notes I put to myself in adavnce that let me know how my day is configured. Now, I sync my ical from my home imac to my work imac, my macbook, my iphone and my ipad. On none of these devices do I have default alerts set. I never set any alerts for any of these 'events'. But then, at 9am the day before each one I get an alert. In fact, I get a 9am alert for any all-day event, regardless of whether I set an alert for then, or at all. As I say, I've checked all devices and the default alert a=on all is set to 'none'. Does anyone know why this is happening and how I stop it?

    Thanks Malcolm.I'm afraid this issue started for me after updating to iOS6!

  • How can I remove calendar alerts from my iPhone?

    My iPhone 4 (iOS 6) seems to be adding calendar alerts on its own and I cannot for the life of me figure out how to remove them. I use iCal on my Macbook Pro (running Mountain Lion 10.8.2) to sync my calendar events. None of my events on iCal have alerts set to them and I have disabled all alerts in my iCal preferences. Yet, for some reason, when I look at a calendar event on my iPhone, an alert is set for it.
    How do I remove these properly? I do not simply want to silence these alerts, but figure out how they got there in the first place and remove them completely. For comparison's sake, I've included an image of the event from iCal and the event from my iPhone.

    Hi pjdemeo,
    I understand you want to delete all of the photos from your iPhone.  As a precaution, I would suggest importing the photos and videos from your iPhone into your computer.  This will give you a backup for the images, and after import you will be asked if you want to delete the photos.
    Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support
    https://support.apple.com/en-us/HT201302
    The iPhone User Guide has instructions for deleting photos directly from the device:
    Organize photos and videos - iPhone
    http://help.apple.com/iphone/8/#/iphf14943e
    Delete a photo or video from Photos. Tap the Photos tab, tap the photo or video, tap , then tap Delete Photo or Delete Video. Deleted photos and videos are kept in the Recently Deleted album on iPhone, with a badge showing the remaining days until the item is permanently removed from iPhone. To delete the photo or video permanently before the days expire, tap the item, tap Delete, then tap Delete Photo or Delete Video. If you use iCloud Photo Library beta, deleted photos and videos are permanently removed from all iOS 8.1 devices that use iCloud Photo Library beta with the same Apple ID.
    Cheers,
    - Judy

  • ERROR WHILE RUNNING ODI SCENARIO FROM BAM ALERT

    We are using oracle data integrator 11g and have created an ODI Scenario and able to run the scenario from ODI studio client.
    We have done the configuration for BAM-ODI integration as mentioned in http://docs.oracle.com/cd/E21764_01/integration.1111/e10224/bam_odi.htm#BABEJIGD
    We have started ODI Agent, soa and bam servers. Created a BAM alert -> select action - Run ODI Scenario -> selected the same scenario.
    Alert ran at scheduled time but failed with following error:
    java.io.IOException : truncated data integrator frame received
    Error Message (if any)
    [2012-08-06T11:24:21.046+05:30] [bam_server1] [WARNING] []
    [oracle.bam.eventengine] [tid: bam-pool-Action-thread-1] [userId:
    OracleSystemUser] [ecid:
    3576f9092ef9497a:-743c430a:138fa7450c3:-8000-00000000000000a8,1:23453] [APP:
    oracle-bam#11.1.1] EventEngine: Error occured while running a ODI Scenario.
    [2012-08-06T11:24:21.250+05:30] [bam_server1] [ERROR] []
    [oracle.bam.eventengine] [tid: bam-pool-Action-thread-1] [userId:
    OracleSystemUser] [ecid:
    3576f9092ef9497a:-743c430a:138fa7450c3:-8000-00000000000000a8,1:23453] [APP:
    oracle-bam#11.1.1] EventEngine: Action exception: EEInstEv2 EEInstAct1 Rule
    Id: 2 exception: java.io.IOException: truncated Data Integrator Frame
    received
    [2012-08-06T11:24:21.250+05:30] [bam_server1] [WARNING] []
    [oracle.bam.eventengine] [tid: bam-pool-Action-thread-1] [userId:
    OracleSystemUser] [ecid:
    3576f9092ef9497a:-743c430a:138fa7450c3:-8000-00000000000000a8,1:23453] [APP:
    oracle-bam#11.1.1] EventEngine: Exception stack trace: [[
    at
    oracle.bam.eventengine.engine.event.action.RunScenario.invokeScenario(RunScena
    rio.java:145)
    at
    oracle.bam.eventengine.engine.event.action.ActionProcessor.runScenario(ActionP
    rocessor.java:891)
    at
    oracle.bam.eventengine.engine.event.action.ActionProcessor.actionHandler(Actio
    nProcessor.java:337)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.j
    ava:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.bam.system.Delegate$Sink.invoke(Delegate.java:80)
    at oracle.bam.system.Delegate.dynamicInvoke(Delegate.java:186)
    at
    oracle.bam.common.threading.threadpool.ThreadPoolController$PoolQueueItem.proc
    essWorkRequest(ThreadPoolController.java:155)
    at
    oracle.bam.common.threading.threadpool.ThreadPoolController$PoolQueueItem.run(
    ThreadPoolController.java:128)
    at
    java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java
    :886)
    at
    java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908
    at java.lang.Thread.run(Thread.java:619)
    Any help on this is highly appreciated...
    Thanks
    Rajdip Mukherjee

    Hi,
    Forgot to include the ODI classes RunScenario.invokeScenario() is invoking odi scenario using odi sdk api. Please see the below stack trace :-
    java.io.IOException: truncated Data Integrator Frame received
    at
    oracle.odi.sdk.invocation.internal.AgentNetworkCmd.readCmd(AgentNetworkCmd.java:303)
    at
    oracle.odi.sdk.invocation.OdiInvocation.invokeCommand(OdiInvocation.java:176)
    at
    oracle.bam.eventengine.engine.event.action.RunScenario.invokeScenario(RunScenario.java:140)
    at
    oracle.bam.eventengine.engine.event.action.ActionProcessor.runScenario(ActionProcessor.java:891)
    at
    oracle.bam.eventengine.engine.event.action.ActionProcessor.actionHandler(ActionProcessor.java:337)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    Thanks
    Rajdip Mukherjee

  • Display an Alert message in PL/SQL block in APEX

    Hi,
    we are getting an oracle exception while inserting a new row. As it is having the unique constaint on a coulumn.
    Now the problem iis we need to Display an "Alert message" based on the input field validation. That java script code for alert has to be embeded nside a PL/SQL block in Oracle APEX Application.
    we tried doing this with below code:
    Begin
    INSERT INTO <<table name>>(ID,NAME) VALUES (s1,:TXT_s2);
    exception when others then
    htp.p('<script language="javascript">');
    htp.p('alert("Exception");');
    htp.p('</script>');
    end;
    If anybody knows .... please reply.
    Thanks,
    Subarna
    Edited by: user9955252 on Apr 21, 2010 1:47 AM

    Hello,
    APEX Forum is here : Oracle Application Express (APEX)
    Regards

  • An alert message observered while appling latest patch MLR 10

    Hi Gurus,
    While applying latest patch MLR10 we observed an alert message as below
    "Creating log file "C:\oracle\midtier\.patch_storage\8404955\Apply_8404955_05-21-
    2009_15-44-27.log"
    Conflicting patches: 8204237,
    Patch(es) 8204237, conflict with the patch currently being installed (8404955).
    If you continue, patch(es) 8204237, will be rolled back and the
    new patch (8404955) will be installed.
    Note: If the patch currently being installed (8404955) is rolled back,
    it is recommended that the fixes being rolled back here (8204237, ) are reinstal
    led.
    If a merge of the new patch (8404955) and the conflicting patch(es)
    8204237, is required, contact Oracle Support Services and request
    a Merged patch.
    Do you want to STOP?
    Please respond Y|N
    Should we rollback the previous patch before applying MLR10 ? or can i continue with patch application ?
    Thanks in advance,
    Regards,
    Cema

    Please continue the MLR10 patch installation, this message would appear for the all patch installation (of course, patch number would be different though).

Maybe you are looking for