No answers on the web, please help!
I am using LabView with DACS Chromatography software from GowMac Instruments. I have been having errors. One of them specifically mentions a NI failure. It says failure: "panel.cpp" line 2106; LabVIEW version 6.0. I tried to enter these into web fields to try and find an aswer, but no luck. Please help!!
I also get another error when I go to do a sample run. I see:
Error 7 occurred at Open File+.vipen File
Possible reasons:
LabVIEW: File not found
or
NI-488: Non-existant board
Now, I had both the DACS software and labview on my D drive. I was getting this last error when I was trying to calibrate the software. So I re-installed the programs on the C drive. Then there were no errors with calibrating or with threshold measurement. But the error is now back when I try to do a sample run. Any help you can provide would be most welcome.
Hi nicholet,
It looks like this error can cleared up by updating LabVIEW to 6.0.2.
Please post back if you have any questions. Have a great day!
Ryan D.
District Sales Manager for Boston & Northern New England
National Instruments
Similar Messages
-
I need answers about the iCloud - Please help
Hi guys, well I have a few iOS devices, 2 ipads, and an iphone. Well, I got a few questions to ask.
1. Ok, on my iphone on settings on the icloud bit, I have my iphone back up aswell as the 2 ipads. What will happen if I delete the back up for 1 of the ipads. Like, I don't know whats on the back up. And If I want a new back up for the ipad, how to I create 1?
2. On the icloud section with all 3 ios devices, my 5gb of storage is full, and each device has a bit of storage used up by it. The iphone - 1.7gb, ipad 1 - 600 mb... And it all adds up to around 5gb. But what I don't understand is, on 1 of the ipads it says I've used up 17gb of storage (not icloud), so why has the icloud only stored 600 mb of it? Shouldn't it store like the whole 5gb? I really don't know... I need all the info about the icloud. And yes I've read all of it on this website but none of it helps.
3. Since it say the icloud storage is full, how do i get more storage, should I just buy more, or is there another way?
All I know is, if I have icloud set up on all 3 of my devices, what ever i buy on 1 devices it goes on the other 3.
And that, i have a back up with all my music n stuff in, just incase something goes wrong. Please help! Thanks!iCloud Support
http://www.apple.com/support/icloud/
iCloud Help
http://help.apple.com/icloud/?lang=en -
My MacAir is great except for a problem i have. Keys F1, F2,F5,F6,F7,F8,F9,F10,F11,F12 and the power button are unresponsive. These are keys i frequently use and i have searched the whole apple help centre. Anyone got answers for me? Please helP!!!
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Universal Access pane in System Preferences, click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by Mac OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use Mac OS X: How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
http://support.apple.com/kb/TS1381 -
i have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers
First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.
The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV. -
I erased an iphone on find my iphone , so i wanted to know what happened and I erased my without a sim card and now I says I cant go on it until i put in a sim card. Did i ruin the phone please help thanks.
You did not ruin the phone, you will need a sim card to activate the phone and then connect the phone to itunes and do a restore from back up.
http://support.apple.com/kb/HT1414 -
HiHi can you please help me to fix my iPhone 5 when I update it to the iOS 6.1.2 my carrier signal indicator states searching all the time please help me what to do
Hi Samantha,
Are you aware that if you restore your ipad that you will lose all data from your ipad and very difficult to get it back unless you had previously made a back-up of your data on itunes or in the cloud. and that would be on the computer you set those up on. (There are some independent apps out there that might help restore data but I don't have any experience with them...)
Also, I think if you restore on another computer you're supposed to have administrator rights and have the latest itunes update. And I think if you sync (if restoring is considered syncing with another computer, you'll be locked out of your computer or a new one.)
I don't know if there is a way for you to safely eject your ipad from your mom's laptop and find another way, but please read this
http://support.apple.com/kb/ts1275
Also, I suggest you start a new post and title it something like First, stuck on update and now on Restore on another computer. Please HELP! And then tell the story of your problem that you originally included and your follow-up efforts to restore given a suggestion on previous post (though I think you SHOULD AVOID RSTORE if you can.) And refer them to your original post
https://discussions.apple.com/message/22050045?ac_cid=tw123456#22050045
Hope this helps and if you can get back to your ios before the upgrade, stay with it. I hope it all works out for you.
FYI - If it's a new or refurb bought within the past year you might be able to have it replaced by Apple. -
My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.
The problem would seem to be in the firewall in your router. Have you tried disabling it? I assume you've updated the router firmware, right? Consider bypassing the ISP provided router (using it as a modem only) and unsing another device such as an Aiport Express.
-
my ipad 1 loses wifi connections when it goes to sleep. have to go into settings to reconnect. Does this all the time. please help.
my ipad 1 loses wifi connections when it goes to sleep. have to go into settings to reconnect. Does this all the time. please help.
-
Im having problem setting up my Hotmail account, it used to work fine until few days ago. It says ive entered an incorrect username or password which i can sign in fine with them details if i use laptop or safari through the phone, Please help..
I Sugges you to log into your hotmail acc and go to security and password change bit, then you will see two-step verification.. turn that off and you will be able to set it up on your iPhone/iPad or even Mac.
Give your phone a restart before trying to set it up. Thanks -
accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help
I'm going to assume that since you deleted your hard drive and all its files, you had a backup, yes? If the backup has an OS (bootable clone), then you can boot into it by holding down the option key when you start up you iMac and choose the backup drive. Then use Carbon Copy Cloner or Super Duper to copy the files back to your iMac.
-
Greetings from the Croatian, please help me, I applied, create an account, but they keep telling me to confirm the account with your support, and we simply do not succeed, do not let me go to the store, or iTunes, so I can not download application, please tell me where I'm wrong, thanks a lot
Novo! Držite pritisnutu tipku Shift, kliknite i povucite riječi prema gore kako biste ih preuredili. Ukloni
Google Prevoditelj za tvrtke:Translator ToolkitPrevoditelj web-lokacijaGlobalna tražilica tržišta
Isključi neposredan prijevodO usluzi Google PrevoditeljMobilni uređajiPrivatnostPomo -
Good morning There is a stop at the camera Please help me When you turn on the camera Shut down automatically
I'm in iraqAdobe Reader is free. It always has been.
You have obviously downloaded and installed Acrobat (30 day trial version) and the trial period has expired.
You need to uninstall Acrobat (using the Control Panel and Add/Remove Programs or Programs and Features [Vista/7])
Then run the Windows Installer Cleanup Utility http://support.microsoft.com/kb/290301
to completely remove the Acrobat installer files.
Then download Reader 9, install it, and go about reading PDFs for free.
EDIT: Please, please please.... do NOT post a phone number in the forums.
You're inviting trouble if you do.
Not everyone who reads these pages is here to help fellow Adobe product users.
Message was edited by: Mac+Win=Me -
I cant save for web - please help me?!
I cant save for web - please help me?!
It says:
"Could not complete this operation. An unknown operating system error has occurred." -
After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .
Hi,
What version of the OS did you upgrade from ?
Anything before OS X 10.8.2 may have an issue if the Logic/Mother board has been replaced and the Serial Number not "flashed" back to it.
In the Apple Icon menu use the About this Mac item.
In the new panel click twice on the line that tells you the current OS level
It will change to the Build number (and alternative count to the OS versions) and then the Serial Number.
If it is missing you need to get it replaced.
(It is supposed to be done on Repair or Refurbishment).
An Apple Store or Apple Authorised Service Provider as the best choices.
There are apps you can download (They are Mac Model specific) but needs careful typing as it is a once only trip.
8:56 pm Sunday; November 24, 2013
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
Message was edited by: Ralph Johns (UK) -
I keep getting the "Something went wrong" message on my Droid Razr HD also. I looked in my Settings, and I don't have a Cloud app - I have a Cloud Print app with nothing cached. This is making it nearly impossible to use the phone - please help! So far, this website has only made things more difficult.
The details you're providing are very helpful, Maj_Dad. With airplane mode enabled,
there would be no message because that disables celluar data. I would recommend
tying that mode with WiFi to see if it still happens. It sounds like this issue
has something to do with one of the applications on the device.
JoeL_VZW
Follow us on Twitter www.twitter.com/vzwsupport
Maybe you are looking for
-
Consolidation of my photos scattered on my c drive and my h drive
Please help me! How do I consolidate my photos into one folder? I have Lightroom 3. All of my photos have been imported already but some are on my C drive and others are on my H drive. How do I consolidate those on my C drive into one pre- existing f
-
34,000 page excel file needs to be converted to pdf
I have a 34,000 page excel file that I need to convert to pdf. The excel file is 13mb. I'm using excel 2013 on Win 7. Within excel, I have tried Save As pdf. It has never finished. I've let it run all day and night, but it gets to about 90% and han
-
Ipod classic and nike sports kit
hi, can anyone tell me if the ipod classic is compatible with the nike sports kit, importantly if its not why not? i spent a considerable amount of money purchasing what i thought was a premium product and it would now appear that it will not even su
-
Hello members, i made a group above report in 6i ,, now the problem is :: when i run the report it first page is blank and record show on second page,, i want to show the report on first page any best idea
-
Missing primary keys after import
Hi, We receive a .dmp file from another company each night. The process changed when they started to obfuscate some sensitive data. But since then we are finding all the tables are missing their primary keys. I really would like to eliminate our impo