No Apple Mobile USB Driver in Device Manager

I have tried to reinstall Apple Mobile Device Driver, but when I follow the necessary step to scan for hardware changes the Apple Mobile USB driver doesn't appear. (for reference: http://support.apple.com/kb/TS1538) I am trying to get an Iphone 5 recognized by Itunes. It still pops up in My Computer and Autoplay (images mostly). But I would like to back up this Iphone 5. Please help, thank you.

see this
iOS: Device not recognized in iTunes for Windows

Similar Messages

Computer can't get the apple mobile usb driver to install?

I get the error that the computer can't get the apple mobile usb driver to install so it won't show up on my computer or in itunes.It actually says Device Driver Software Not Sucessfully installed. Apple Mobile Device USB Driver failed. I'm using windows 7 which is fully updated, I have downloaded the newest itunes and also uninstalled and reinstalled it ans all of its components. I have followed every guide to sync your device to the computer and itunes, none of it has worked. I have unplugged my computer and tried it, I have taken the battery out of the computer and waited a few minutes and tried it. I have even gone into Device Manager looked under universal USB controllers and see an exclamation point next to the apple driver where its not working. I can click on it and tell it to look for the newest software and it says it's up to date and still not working. I have tried ever single usb advice or apple advice I can find over the last 3 hours and nothing is working. Please someone help me. I need to restore my ipad and I can't get it to show in itunes! please someone help!

Make sure Apple Mobile Device USB driver is properly installed.

Where is apple mobile usb driver

since the update of itunes last week, I have lost my mobile usb driver... where can I find it? thank you muchly

http://support.apple.com/kb/ts1538 open this articlle, and then click on number 5. Follow the directions for your specific computer to check and see it the APPLE MOBILE DEVICE USB DRIVER is installed. If it is not listed, check in "Portable Devices" There you will most likely see a entry "Apple iPhone". If so click on this link to update the Mobile device driverIf only Apple iPhone, Apple iPad, or Apple iPod appears After you update the driver, iTunes will recognize your phone again

TS1538 apple mobile usb driver

My Window 7 computer has deleted the Apple Mobile Device USB Driver. Itunes won't recognize any of our iphones. Frustrating. Plug the phones in come up with unknown device. Any suggestions. Have changed USB Cable and tried different ports.

See section 4 of this support document, it will explain how to reinstall the Apple Mobile Device USB Drive http://support.apple.com/kb/TS1538

How can i download a mobile usb driver?

My hard drive recently crashed and I have had to redownload everything. I have downloaded itunes, but when I try and hook up my ipod it says I need an apple mobile USB driver. How can I download that driver?

You can either use the manufacturer-supplied driver or NI-VISA to control your USB device but not both. If you have installed your device, each time you plug it in the FTD2XX.inf will associate your device with FTD2XX.sys. Then, you can use FTD2XX.dll to talk to your device using the call library function node. The DLL usually contains a whole bunch of useful functions that someone else already designed to talk to your device. This is the easier route and I would recommend it if you already have the DLL and the installed driver.
The second method would be to uninstall or disable the driver for your device and create an .inf file with NI-VISA Driver development wiazard. This .inf file will tell Windows to use VISA as your device driver. You will, however need the vendor and product ID of the device to use VISA as your driver. The details of this are outlined in the NI document "Using VISA 3.0 to control your USB device."
The drawback of this method is that VISA is just an API to talk to your device and you have to implement the communication protocol to talk to your device. This might take some time to do.
This is why I recommend the first method. Someone else already implemented the driver for your and you just have to use the functions from the dll to implement your application.
Hope this helps.

Apple iPod USB Driver

I can connect my iPod fine to the computer, use iTune and everything just right. However, the battery keeps dying on me way too quickly.
And while I do have USB entrances, and I am using them to connect, for some reason when I go check the devices and USB ports, it's listed as "Apple iPod USB Driver" and I can't change any of it's properties and nothing happens when I update it. And so, I have no clue as to what's going on.
First I thought it was the iPod's fault, sent it to be repaired, got it back, they said it was fine. So it's the computer and the iPod not getting along or something.
Any suggestions?

Sorry, correcting:
I can connect my iPod fine to the computer, use iTunes and everything just right. However, the battery keeps dying on me way too quickly, as if I'm recharging from a USB 1.0.
And while I do have USB 2.0 entrances, and I am using them to connect, for some reason when I go check the devices and USB ports, it's listed as "Apple iPod USB Driver" and I can't change any of it's properties and nothing happens when I update it. And so, I have no clue as to what's going on.
First I thought it was the iPod's fault, sent it to be repaired, got it back, they said it was fine. So it's the computer and the iPod not getting along or something.
Any suggestions?

Lenovo S410p accidentally deleted NVIDIA Driver from device manager

Hello,
I "accidentally" uninstalled my NVIDIA GeForce 720M driver from my device manager when I tried to reinstall the driver. Now it no longer shows up on the device manager at all, and I cannot install any driver since the laptop does not detect it anymore.
I am running Windows 8.1 64bit on a Lenovo ideapad s410p laptop. The only graphics driver detected is the intel one. And since I'm using a laptop, re-plugging in the graphics card is not really a feasible option either...
System restore does not work (The oldest backup, somehow, is AFTER the uninstallation), and I really do not want to resort to factory reset... And of course, before the uninstallation, the driver worked just fine.
Is there any way I can force the laptop to detect the GPU again? I am pretty sure the hardware is working fine, just undetected
Please help, I have no idea what else to do at this point. Thank you in advance..
Solved!
Go to Solution.

hi Votbear,
Welcome to lenovo Community Forums!
Can you check under Drive D: if you still have the drivers folder back up
Try looking for the Video Graphics driver installer and install that.
In case you can't find the driver folder or the system does not have a D: drive
Try downloading the driver here, see if those work
NVIDIA VGA Driver for 32-bit Windows
NVIDIA VGA Driver for 64-bit Windows
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Thinkpad S430 missing SM Driver in device manager

I upgraded my S430 hard drive to an SSDMy operating system is Windows 8.1 Pro 64 bitI took a screenshot of my Windows device manager before upgrading the hard drive and it had no unknown devices and included one device called "SM Driver"Now after upgrade I have one unknown "PCI Device" with an exclamation mark and no device called "SM Driver"I have installed this Chipset driver and it has not resolved the problem http://support.lenovo.com/us/en/downloads/ds032281

Welcome to the forum!
I believe that it's the wireless card that your missing.
Could you please post the 7-character model number found on the sticker on the bottom of your ThinkPad?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

L7580 All-in-1 is listed as a disk drive by Device Manager! What gives?

Disk manager lists my officejet L7580 as "HP Officejet Pro L7 USB Device" under Disk drives. Is this an error? Do I need to reinstall the driver? I'm having some other problems with the printer that I'm trying to track down and am wondering whether this might be a lead to the problems.

I am having the same issue with the HP Officejet Pro. (Model is 8510) Will not connect the printer via the USB port or wireless. Imaging Devices displays HP Officejet Pro 8610. Other devices displays Unknown device.
Deleted the device from Disk drives but it comes back just as soon as I connect the printer to the PC. Earlier my problem was that 5 or 6 .inf files were not in the C:/windows/inf folder.
4 hours wasted trying to get a printer on my PC.

HP Notebook 9628nr does not see DVD Drive no optical drive in device manager

for some reason it does not see the dvd drive this happen after I flash the bios which was recommended from the HP website can anybody tell me how to fix this problem

Im having a problem like this, DVD not appeare in my computer and system devices, after that a webcam will broken also( unknow device USB); solve: damaged motherboard, one of bridges- north probably
regards
and watch your motherboard properly

Apple Mobile Device USB Driver shows up with an ! in Device Manager (Windows 8)

When trying to sync my iPhone 5C with iTunes for Windows 8, the device is not recognised on the software. I have checked that my devices are up to date and uninstalled and reinstalled iTunes. I've uninstalled and reinstalled 'Apple Mobile Device USB Driver' in Device Manager, yet it continues to come up with an '!' next to it, and when checking the properties it states "This device cannot start. (Code 10) The specified request is not a valid operation for the target device." How do I fix this problem?

Hi, acxdunicorn.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > If the Apple Mobile Device USB Driver is not listed.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

Where is the link to download apple mobile device USB driver software

I need to download apple mobile device USB driver software but can't find it onlie. Advice where i can download it from much appreciated.

I had the same problem with my iTouch when I upgraded to iTunes 10. I'm not sure if my problem was the same as with the nano but every time I reinstalled iTunes and plugged in my Touch, I got an error message for driver installation and the Apple Mobile Device USB Driver in Device Manager with a little yellow exclamation mark. The error message that came up stated something about the digital signature of the driver not being right. The fix that worked for me was as follows:
Delete the 2 Apple Mobile Device USB Driver files. If you right click on the Apple Mobile Device USB Driver in Device Manager and select properties it will tell you where they are located in the windows folder. My 2 files for windows 7 64 bit were:
usbaapl64.sys
usbaaplrc.dll
With ipod disconnected, restart computer and press F8 to enter boot menu.
Select boot option without digital driver signature support.
After boot, connect ipod and driver should automatically install correctly without error.
Good Luck
I called Apple and they would not provide any unpaid support for iTunes issues.

Apple Mobile Device USB Driver is corrupted or missing

it started when i updated the new version of iTunes (10.3) and when i connect my iPhone 4, it doesnt show up on my iTunes. I checked everything and i narrowed it down to Apple Mobile Device USB Driver under Device manager, i looked it up, clicked Properties and it says "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)". I really dont know what to do with this. I cant connect my iPhone 4 or lets just say iPhones or iPods in general because im having problems with the Apple Mobile Device Software.
BTW, My iPhone and my iPods dont have any problems, they charge.
Thanks for your responses and help! i really appreciate it!
I have a Windows Vista 64 Bit Version

b noir wrote:
Okay ... I think we'd better try a complete uninstall/reinstall now, speed. For instructions, see:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
I'm in the process of deleting the programs (iTunes, Bonjour, and everything related to iTunes/Apple). By the way, i did the complete uninstall and reinstall but the thing is, while i was downloading iTunes, theres a pop up that says
it will rollback the installing process but the computer will try installing it again, i have the previous version 10.2.2, i download the old version and still have the pop up but i cimpletely installed iTunes

The "Unable to install Apple Mobile Device USB Driver" problem

Ever since I installed iTunes 10, I've had nothing but problems. I tried every fix I could find on the internet, unfortunately there are not too many, Apple's own website has loads of fixes but they never work.
I keep getting the Apple Mobile Device USB Driver come up in Device Manager with a little yellow exclamation mark and nothing I seem to do can fix it properly. I managed to fix it once, my iPod was synced and all was good, but once I restarted my PC, the problems started again. And I tried my friends iPhone which works perfectly and the same problem came up on my PC.
Cant someone give me a proper fix please?

I had the same problem with my iTouch when I upgraded to iTunes 10. I'm not sure if my problem was the same as with the nano but every time I reinstalled iTunes and plugged in my Touch, I got an error message for driver installation and the Apple Mobile Device USB Driver in Device Manager with a little yellow exclamation mark. The error message that came up stated something about the digital signature of the driver not being right. The fix that worked for me was as follows:
Delete the 2 Apple Mobile Device USB Driver files. If you right click on the Apple Mobile Device USB Driver in Device Manager and select properties it will tell you where they are located in the windows folder. My 2 files for windows 7 64 bit were:
usbaapl64.sys
usbaaplrc.dll
With ipod disconnected, restart computer and press F8 to enter boot menu.
Select boot option without digital driver signature support.
After boot, connect ipod and driver should automatically install correctly without error.
Good Luck
I called Apple and they would not provide any unpaid support for iTunes issues.

How do i fix the "Unable to install Apple Mobile Device USB Driver" problem access denied

My new iphone 5c will not work with my laptop. The apple mobile usb driver will not install. 'Access denied' is the final message in the diaolgue box of the device load error. The device is recognized but there is the yellow triangle with the exclamation point on it indicating an error installing. I've removed itunes and its components as directed step by step ..... twice..... I've disabled antivirus, firewalls, and even created a second admin profile in hopes that it would load the driver. Nothing is working. The apple person was supposed to call me back after we were on the phone 90 minutes. Well.... I guess she did not. Help!!! I would love to sync my phone. Any ideas?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

No Apple Mobile USB Driver in Device Manager

Similar Messages

Maybe you are looking for