No applicable data found.. Erro in standard cubes.
Hi,
I am getting an error during the utilization of standard cubes in BI 7.01.
After the data load is complete, when i tried to execute the standard cube "Warehouse Workload History - Deliveres" , or
any other standard cubes, NO DATA CAN BE FOUND.
When using Bex Query Designer on Web, the message is : NO DATA CAN BE DISPLAYED. This could be due the current selection of variable or filter values.
When using Analizer in excel, the message is : NO APPLICABLE DATA FOUND
But if we create the same query from beginning, not using the standard cube, with the same fields and indexes and records,
the values are displayed.
We also try to save as the same standard report with another name and doesn`t work.
My system is SAP EHP1 for SAP NETWEAVER 7.0 in SO Linux and Oracle Database.
SAP_ABA , SAP_BASIS, PI_BASIS, SAP_BW is 701 level 07.
BI_CONT is 705 level 01.
please any advices
Check whether the standard report is created on the Info-provider on which the data is loaded .You can see the same in the query properties next to the check query button in query designer as you are able to see data , by creating another query on the inforprovider .
Similar Messages
-
Hiding table items in web report when "no applicable data found"
Hi,
i want to hide a complete web item from a web report using web table interface
when i have the situation "no applicable data found".
I cannot use javascript due to requirements in my solution.
can i set some attributes in the START method in the class?
i can see there is an attribute N_NO_DATA which tells if no data is found.
Can i use this in the other methods to hide the complete table including table heading?
Best regards,
JarleHello,
datas are available in the Cube, they are displayed when there is no filter or when only one single value is selected in the filter.
The problem happens when two or more values are selected in the filter.
Example :
The field selected is Profit Center.
Without filter the I can see :
PC1
PC2
PC3
etc...
If I select in filter the value PC1, I can see :
PC1
If I select in filter the value PC2, I can see :
PC2
But If I select in filter the values PC1 and PC2, I can see :
No Applicable Data Found.
BR,
Pedro. -
Message "No applicable data found" after executing the report
Hi all,
I have 60 records in a cube which is extracted from a function module. I am able to see the data in the cube but when I execute the report I am getting the message u201CNo applicable data foundu201D. Why is that so?
Can any one please explain me what to do to bring data when the report is executed?
When I execute the query there is only one field selection criteria 0P_FPVANT and this is mandatory. When I checked the data in the cube I didn't find any field 0P_FPVANT but I found a field Fiscal Period Variant with the technical name, 0FISPER
I executed the query in RSRT and there also I am getting the same message, "No applicable data found".
Please advise what do I need to do inorder to get data when the report is executed?
Thank you.
Regards,
Pavan.I think so.
Ok let me take the other report 0FIAR_C02_Q1003. For this report the selection criteria is
Company code,
Customer and
Period/Fiscal Year
Of these only company code is mandatory. In the data in the cube I see that for co. code BP01 data is available. So I executed the report with co. code as BP01 but no data.
Then I gave co. code BP01 and Period /Fiscal year as 2008, 2008.03, still I see no data.
I tried with values in all the fields that are available in cube
co. code - BP01
Customer - PCS-C10
Period/Fiscal Year - 2008011
Now with respect to Period/Fiscal Year selection field in report, in cube there are 4 columns
Fiscal Year Period,
Posting Period,
Fiscal Year Variant and
Fiscal Year
I've tried all of them but when I enter values in all the fields still I am getting the same error, "no applicable data found".
Please advise.
Thank you.
Pavan. -
Report Report Interface: No applicable data found
Hi.
I m using the Report Report Interface and getting:
No applicable data found
while calling in GoTo the second Report.
While removeing the filters threre is data .
What conditions needs to be met that there is data displayed?
Thank You
MartinHi,
Please execute the second report separtely with the same filter with which you are getting 'No applicable data found'.
Please check whether executing second report gives you any data with same filter or not.
If it doesn't give , then it means there is no data available to be displayed for that particular filter combination in cube.
In that case you will have to filter the data which is available in cube or need to load the data as required.
Regards,
Amit -
No Applicable Data Found during query execution !
Hi friends,
I know this question has been posted on sdn so many number of times and i have gone through all of those thread. i checked all the things menssioned in the previous thread and did accordingly, but not able to resolve this issue. Here is the details of the problem encountered:
I am trying to execute a query <b>wihout</b> any selection crieteria. after runnig for 10-15 secs i am getting the following message:
"No Applicable Data Found."
I went to the Infocube manage and checked all the requests are green and "Request for reporting availble" option is also checked for each and every request loaded.
I checked the LISTCUBE Tcode and checked that the data is there.
Any idea how to fix this thing?
manmitThanks Bhabu for ur quick reply..actually i am in Production and so i can not remove that filter from the query design. we are using "Current calander month" as the filter. and when i go to the LISTCUBE. how can i put the same filter in LISTCUBE as i can see the date in the list cube upto only 2006 year.
I think it is not getting data because of this filter...as the current month filter takes the data of current month and there is not data for this month in the cube i guess. plz correct me if i am wrong..
assigned points for ur help already...
Manmit -
No applicable data found - Error in BEx
Experts,
I have data (material, qty and amt related with future commitments) in cube. I see that data activated in cube and available for reporting. But when I execute report (no filters) I can see that some material is no displayed and if I run report selecting that material it says no applicable data found. This is so wierd problem. Anyone come across this type of situation? Any suggestions or comments please? Thanks.
Regards,
NimeshHi,
you are facing this issue only for few materials.....then it's not a data issue.
If you are looking the values of the basic key figure or some RKF's or CKF's.
It could be possible that the RKF's are defined in such a way that it would be giving only specific materials only.
you said you have activated the master data..... have you run an attribute change run after that??
Do you have any conditions at the report level??? just check that...
Thanks -
Display 0 value for not applicable data found in Company Code Hierarchy
Dear Expert,
How to display 0 value inside company code hierarchy which has no data applicable data found in BW Report? I have created queries with Profit Center(PC) Hierarchy and inside this hierarchy there are several PC. Based on data in BW Cube some of the PC has no applicable data found. But my report should display all the PC inside this hierarchy with 0 value for no applicable data found. What should i do to default 0 value for no applicable data found for that PC so that my report will be display all PC in that hierarchy?
Best regards and thank you,
LinHi Lin,
Right now what value you are seeing when executing the query?
Thanks & Regards,
Vipin -
Bex report issue - no applicable data found when we drill down on free char
Hi All,
We are facing some strange issue with one of the report.
when user run the report for a week (02/02/2009 - 02/08/2009) and then drill down on particular char its working fine (first time).after that when he is trying to change and execute the report for other week on the same instence ( 02/09/2008 - 02/15/2009) by clicking on refresh and passing new values to the variable its showing up correctly at the time of drill down on free char its showing as *no applicable data found.*
when he logoff the system completey and run the report for the week( 02/09/2008 - 02/15/2009) values it is showing up with values even tough he drill down on free char.
issue basically when he was trying to drill on free char by chaging different date values in the same instance by clicking on refreh and by entering diffrent values its showing up as not applicable data found.
but when he enters the values for different weeks each time by closing the system and relogin report is working fine and showing up data eventough he drill down on free char.
Please help me out!Dear
Please check if any condition or exception you have created for that query.
Or still problem exists check SP level.
Regds,
Sachin J -
Hello All
I am having a strange problem in BI 7.0 when running a query in BEx I receive, as expected, a report filled with data. My problem occurs when I save this query as an Excel worksheet open the file and refresh it, with exactly same filters as the original query, I then recieve the message No Applicable Data Found!
I hope someone can help explain this?
Thanks
PhillipHi Padmanabha,
Check whether the records are in "A" --Active mode or "M" -modified..
In some cases Changes to Master data Texts can be seen immediately..but attributes can't been seen unless and until the mode is "A"..
Hope this might be of some use to you..
Regards,
Manga
Message was edited by: Manga
Message was edited by: Manga -
Show "No Applicable Data Found" for Report 0SD_C01_Q22
Hi Gurus,
I just activated BI Content Report, 0SD_C01_Q22 and it's relevant InfoSource, DataSource and so on. The data from R3 were loaded into the infoCube successfully.
However, it shows "No Applicable Data Found" when I executed the query.
I have tried to create a new query based on the same InfoCube but has NO limitation parameter. However the result was the same.
Can anyone consult out?
CheersHi my friends,
I have tested it with a really simple report that has no selection condition. But the result is the same.
Also, I have checked the data in infoprovider with LISTCUBE but the data are definitely available.
By the way, I test it with an account hazing profiles as SAP_ALL and S_A.SYSTEM. The super user account should have enough authorization.
So my friends, anymore ideas? Pls help out....
Cheers. -
"No Applicable Data found" message in BEx Analyzer Query
Can anyone help me on this problem? I have encountered this problem when i tried to view the results in analyzer after i completed the database with all the data.
Query - Demo: ICDEMOBC00_Q01 - Key Date: 31.12.9999
Calendar Day
Customer ID
Material number
Key Figures
Sale representative
No Applicable Data Found.You key date 31.12.9999, is this the date you entered in a variable? If so I presume you don't have data on your system for this time period.
If you take the date filter out of the report do you see data?
Also check if there are any conditions on the report that may be active.
Regards
Gill -
How to replace "No Applicable data found." message with other message ?
Hi all BW Gurus
I have a very specific requirement wherein the user wants to see different message instead of "No Applicable data found." in Web result of query.
I think this should be possible with Table Interface Class but i am not sure how to go about this.
If anybody can help me in this regard with sample ABAP code to be written in Table interface class it would be highly appreciated as the requirement is very urgent.
Thanks in Advance
Regards
Swapnil.Hi Swapnil,
If you are using Web Application Designer means... Through Java Scripting you can solve ur problem.... if it BEX means through Macros you can solve ur problem...
let me know, if you are using Wad means.. i will give the java script.... for displaying different message....
thanks
@jay -
BEx Analyzer (SAP BW 3.x) - No Applicable Data Found
Hi,
currently, i now access my BI Server remotelly and my local pc is install with Netweaver 2007s, and i try to do a tutorial on SAP BW. like create infosource, infocube and etc but when i finish creating the infocube and try to make a new query on BEx Analyzer (SAP BW 3.x), and seem like it cannot display anything the errors is as follow "No Applicable Data Found" so now i suspect is either drivers problem or access right problem.. beside that i do make an Installation Check On BEx Analyzer on Business Explorer after that i display this few red alerts.
Filename Version on PC
<b>BW Components</b>
sapbex.xla Not found
sapbex0.xla Not found
sapbexc.xla
<b>OLE for OLAP</b>
mdrmdlg.dll Not found
mdrmsap.dll Not found
mdxpars.dll Not found
saprfc.ini Not found
scerrlkp.dll Not found
<b>SAP GUI core components</b>
sapfctrl.dll Not found
sapfcust.exe Not found
sapfdraw.dll Not found
sapfewrm.dll Not found
sapfhook.dll Not found
wonder could anyone advise me on will this few components result i unable to display the data? if really i need those component how could i download it or should i reinstall it...
anyway for access right part, currently i not the super user account will it affect the query??Hi Ram,
My dimension table i check already in the Data Warehousing WorkBench the data is sufficient.
even i also check on My Fact table, it has also data loaded in.
but then problem is i unable to display data out.
as according to the book, i follow it should be display out the whole information.
Regards
Jia Jun -
Getting '' No Applicable data found''
I am getting this message when I tried to run the qurey
please advise
I have checked everything and can see the data in the preview screen
will assinge points
thankshi,
to remove this error go to the infocube manage(right click on infocube and then select manage).go to the request tab.
now delete the request which failed i.e the red request.
now again execute the query.
u will get the data in the query.
pls assign points if helpful. -
No Applicable data in Jump Report
Hi All,
I am having some issue with jump report.We are able to see the data in multiprovider of both main and jump one..when we check in report for Asia region i am able to see data in main report but when we go to jump report i am getting No Applicable data Found.Other than Asia ,jump report is showing data for other regions.Query is based on multiprovider.Ther is no conditions also.please help me out.
Cheers,
BhavaniThat variable is having this call function query.
WHEN c_zvbesfss.
CALL FUNCTION 'ZBWSP_GET_INFOPROV_YYSTEERQ'
EXPORTING
i_bwsp_infoprov = i_s_cob_pro-infoprov
I_BWSP_QUERY =
i_bwsp_iobjnm = '0COMP_CODE'
TABLES
i_bwsp_var_range = i_t_var_range
T_YYSTEERQ =
e_t_range = e_t_range.
and call function is
DATA: r_bwsp_inobj TYPE RANGE OF rsiobjnm,
l_bwsp_inobj TYPE rsiobjnm,
w_bwsp_inobj LIKE LINE OF r_bwsp_inobj,
w_bwsp_var_range TYPE rrrangeexit, "variable structure
w_yysteerq TYPE yysteerq, "Steering Table
l_s_range TYPE rrrangesid. "Range expanded around SID
CONSTANTS: zsppc_c_zero TYPE char1 VALUE '0'. "for zero
Processing the i_t_var_range table and filling up the range r_bwsp_comp_code
LOOP AT i_bwsp_var_range INTO w_bwsp_var_range WHERE iobjnm = i_bwsp_iobjnm.
w_bwsp_inobj-sign = w_bwsp_var_range-sign.
w_bwsp_inobj-option = w_bwsp_var_range-opt.
w_bwsp_inobj-low = w_bwsp_var_range-low.
w_bwsp_inobj-high = w_bwsp_var_range-high.
APPEND w_bwsp_inobj TO r_bwsp_inobj.
ENDLOOP.
l_bwsp_inobj = i_bwsp_iobjnm.
SHIFT l_bwsp_inobj LEFT DELETING LEADING zsppc_c_zero.
If the above range is filled then
IF NOT r_bwsp_inobj IS INITIAL.
Fill the t_yysteerq table from yysteerq database table
SELECT *
FROM yysteerq
INTO TABLE t_yysteerq
WHERE mprov = i_bwsp_infoprov
AND query = i_bwsp_query
AND iobj = l_bwsp_inobj
AND char_val IN r_bwsp_inobj.
ELSE.
Otherwise fill t_yysteerq table from yysteerq database table
SELECT *
FROM yysteerq
INTO TABLE t_yysteerq
WHERE mprov = i_bwsp_infoprov
AND query = i_bwsp_query
AND iobj = l_bwsp_inobj.
ENDIF.
Check the sy-subrc and if OK, then update the e_t_range table
by processing t_yysteerq internal table
IF sy-subrc = 0.
SORT t_yysteerq.
DELETE ADJACENT DUPLICATES FROM t_yysteerq.
LOOP AT t_yysteerq INTO w_yysteerq.
l_s_range-low = w_yysteerq-cube.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDLOOP.
Delete e_t_range if any duplicates are updated.........
SORT e_t_range BY low.
DELETE ADJACENT DUPLICATES FROM e_t_range COMPARING low.
ENDIF.
ENDFUNCTION.
I took abapers help but nothing found
Maybe you are looking for
-
New to the Airport Express and NEED help
I am really network stupid, I just purchased an Airport Express to play Itunes over my stereo. I have a linksys router. I always get the same error message..."The airport assistant found windows is not allowed to manage wireless networks on this comp
-
For the last 5 days, I've been getting a message that says firefox has blocked me from opening a new window. I have to x that to get onto facebook. Once I'm in, everything I try to do brings up this message. My friend's posts don't have the share but
-
Duplicate Groups and how to get rid of them
Somehow (maybe by having sync from iTunes and from MobileMe I have duplicate groups of calendars and contacs. With the same information in each group, I can't get rid of one set or the other. How can I do that and which one should I get rid of (if th
-
Issue with starting tomcat in windows for webcenter sites installation
Hello All, I have been trying to install oracle webcenter sites on windows 7, I followed all the steps in the documentation for the configuration and setup. but anytime I start the tomcat using the startup.bat script I get errors as shown below. C:\W
-
What is the best way to capture material determination changes? The DBTABLOG table is 180GB in size so another way needs to be investigated other than setting on table logging for the material determination tables. There is no built-in SAP change