No applicable data found - Error in BEx

Experts,
I have data (material, qty and amt related with future commitments) in cube. I see that data activated in cube and available for reporting. But when I execute report (no filters) I can see that some material is no displayed and if I run report selecting that material it says no applicable data found. This is so wierd problem. Anyone come across this type of situation? Any suggestions or comments please? Thanks.
Regards,
Nimesh

Hi,
you are facing this issue only for few materials.....then it's not a data issue.
If you are looking the values of the basic key figure or some RKF's or CKF's.
It could be possible that the RKF's are defined in such a way that it would be giving only specific materials only.
you said you have activated the master data..... have you run an attribute change run after that??
Do you have any conditions at the report level??? just check that...
Thanks

Similar Messages

"No Applicable Data found" message in BEx Analyzer Query

Can anyone help me on this problem? I have encountered this problem when i tried to view the results in analyzer after i completed the database with all the data.
Query - Demo: ICDEMOBC00_Q01 - Key Date: 31.12.9999
Calendar Day
Customer ID
Material number
Key Figures
Sale representative
No Applicable Data Found.

You key date 31.12.9999, is this the date you entered in a variable? If so I presume you don't have data on your system for this time period.
If you take the date filter out of the report do you see data?
Also check if there are any conditions on the report that may be active.
Regards
Gill

BEx Analyzer (SAP BW 3.x) - No Applicable Data Found

Hi,
currently, i now access my BI Server remotelly and my local pc is install with Netweaver 2007s, and i try to do a tutorial on SAP BW. like create infosource, infocube and etc but when i finish creating the infocube and try to make a new query on BEx Analyzer (SAP BW 3.x), and seem like it cannot display anything the errors is as follow "No Applicable Data Found" so now i suspect is either drivers problem or access right problem.. beside that i do make an Installation Check On BEx Analyzer on Business Explorer after that i display this few red alerts.
Filename Version on PC
BW Components
sapbex.xla Not found
sapbex0.xla Not found
sapbexc.xla
OLE for OLAP
mdrmdlg.dll Not found
mdrmsap.dll Not found
mdxpars.dll Not found
saprfc.ini Not found
scerrlkp.dll Not found
SAP GUI core components
sapfctrl.dll Not found
sapfcust.exe Not found
sapfdraw.dll Not found
sapfewrm.dll Not found
sapfhook.dll Not found
wonder could anyone advise me on will this few components result i unable to display the data? if really i need those component how could i download it or should i reinstall it...
anyway for access right part, currently i not the super user account will it affect the query??

Hi Ram,
My dimension table i check already in the Data Warehousing WorkBench the data is sufficient.
even i also check on My Fact table, it has also data loaded in.
but then problem is i unable to display data out.
as according to the book, i follow it should be display out the whole information.
Regards
Jia Jun

Bex report issue - no applicable data found when we drill down on free char

Hi All,
We are facing some strange issue with one of the report.
when user run the report for a week (02/02/2009 - 02/08/2009) and then drill down on particular char its working fine (first time).after that when he is trying to change and execute the report for other week on the same instence ( 02/09/2008 - 02/15/2009) by clicking on refresh and passing new values to the variable its showing up correctly at the time of drill down on free char its showing as *no applicable data found.*
when he logoff the system completey and run the report for the week( 02/09/2008 - 02/15/2009) values it is showing up with values even tough he drill down on free char.
issue basically when he was trying to drill on free char by chaging different date values in the same instance by clicking on refreh and by entering diffrent values its showing up as not applicable data found.
but when he enters the values for different weeks each time by closing the system and relogin report is working fine and showing up data eventough he drill down on free char.
Please help me out!

Dear
Please check if any condition or exception you have created for that query.
Or still problem exists check SP level.
Regds,
Sachin J

No applicable data found.. Erro in standard cubes.

Hi,
I am getting an error during the utilization of standard cubes in BI 7.01.
After the data load is complete, when i tried to execute the standard cube "Warehouse Workload History - Deliveres" , or
any other standard cubes, NO DATA CAN BE FOUND.
When using Bex Query Designer on Web, the message is : NO DATA CAN BE DISPLAYED. This could be due the current selection of variable or filter values.
When using Analizer in excel, the message is : NO APPLICABLE DATA FOUND
But if we create the same query from beginning, not using the standard cube, with the same fields and indexes and records,
the values are displayed.
We also try to save as the same standard report with another name and doesn`t work.
My system is SAP EHP1 for SAP NETWEAVER 7.0 in SO Linux and Oracle Database.
SAP_ABA , SAP_BASIS, PI_BASIS, SAP_BW is 701 level 07.
BI_CONT is 705 level 01.
please any advices

Check whether the standard report is created on the Info-provider on which the data is loaded .You can see the same in the query properties next to the check query button in query designer as you are able to see data , by creating another query on the inforprovider .

No Applicable Data Found

Hello All
I am having a strange problem in BI 7.0 when running a query in BEx I receive, as expected, a report filled with data. My problem occurs when I save this query as an Excel worksheet open the file and refresh it, with exactly same filters as the original query, I then recieve the message No Applicable Data Found!
I hope someone can help explain this?
Thanks
Phillip

Hi Padmanabha,
Check whether the records are in "A" --Active mode or "M" -modified..
In some cases Changes to Master data Texts can be seen immediately..but attributes can't been seen unless and until the mode is "A"..
Hope this might be of some use to you..
Regards,
Manga
Message was edited by: Manga
Message was edited by: Manga

Message "No applicable data found" after executing the report

Hi all,
I have 60 records in a cube which is extracted from a function module. I am able to see the data in the cube but when I execute the report I am getting the message u201CNo applicable data foundu201D. Why is that so?
Can any one please explain me what to do to bring data when the report is executed?
When I execute the query there is only one field selection criteria 0P_FPVANT and this is mandatory. When I checked the data in the cube I didn't find any field 0P_FPVANT but I found a field Fiscal Period Variant with the technical name, 0FISPER
I executed the query in RSRT and there also I am getting the same message, "No applicable data found".
Please advise what do I need to do inorder to get data when the report is executed?
Thank you.
Regards,
Pavan.

I think so.
Ok let me take the other report 0FIAR_C02_Q1003. For this report the selection criteria is
Company code,
Customer and
Period/Fiscal Year
Of these only company code is mandatory. In the data in the cube I see that for co. code BP01 data is available. So I executed the report with co. code as BP01 but no data.
Then I gave co. code BP01 and Period /Fiscal year as 2008, 2008.03, still I see no data.
I tried with values in all the fields that are available in cube
co. code - BP01
Customer - PCS-C10
Period/Fiscal Year - 2008011
Now with respect to Period/Fiscal Year selection field in report, in cube there are 4 columns
Fiscal Year Period,
Posting Period,
Fiscal Year Variant and
Fiscal Year
I've tried all of them but when I enter values in all the fields still I am getting the same error, "no applicable data found".
Please advise.
Thank you.
Pavan.

How to replace "No Applicable data found." message with other message ?

Hi all BW Gurus
I have a very specific requirement wherein the user wants to see different message instead of "No Applicable data found." in Web result of query.
I think this should be possible with Table Interface Class but i am not sure how to go about this.
If anybody can help me in this regard with sample ABAP code to be written in Table interface class it would be highly appreciated as the requirement is very urgent.
Thanks in Advance
Regards
Swapnil.

Hi Swapnil,
If you are using Web Application Designer means... Through Java Scripting you can solve ur problem.... if it BEX means through Macros you can solve ur problem...
let me know, if you are using Wad means.. i will give the java script.... for displaying different message....
thanks
@jay

I am getting ORA-01403: no data found error while calling a stored procedur

Hi, I have a stored procedure. When I execute it from Toad it is successfull.
But when I call that from my java function it gives me ORA-01403: no data found error -
My code is like this -
SELECT COUNT(*) INTO L_N_CNT FROM TLSI_SI_MAST WHERE UPPER(CUST_CD) =UPPER(R_V_CUST_CD) AND
UPPER(ACCT_CD)=UPPER(R_V_ACCT_CD) AND UPPER(CNSGE_CD)=UPPER(R_V_CNSGE_CD) AND
UPPER(FINALDEST_CD)=UPPER(R_V_FINALDEST_CD) AND     UPPER(TPT_TYPE)=UPPER(R_V_TPT_TYPE);
     IF L_N_CNT >0 THEN
          DBMS_OUTPUT.PUT_LINE('ERROR -DUPlicate SI-1');
          SP_SEL_ERR_MSG(5,R_V_ERROR_MSG);
          RETURN;
     ELSE
          DBMS_OUTPUT.PUT_LINE('BEFORE-INSERT');
          INSERT INTO TLSI_SI_MAST
               (     CUST_CD, ACCT_CD, CNSGE_CD, FINALDEST_CD, TPT_TYPE,
                    ACCT_NM, CUST_NM,CNSGE_NM, CNSGE_ADDR1, CNSGE_ADDR2,CNSGE_ADDR3,
                    CNSGE_ADDR4, CNSGE_ATTN, EFFECTIVE_DT, MAINT_DT,
                    POD_CD, DELVY_PL_CD, TRANSSHIP,PARTSHIPMT, FREIGHT,
                    PREPAID_BY, COLLECT_BY, BL_REMARK1, BL_REMARK2,
                    MCC_IND, NOMINATION, NOTIFY_P1_NM,NOTIFY_P1_ATTN , NOTIFY_P1_ADDR1,
                    NOTIFY_P1_ADDR2, NOTIFY_P1_ADDR3, NOTIFY_P1_ADDR4,NOTIFY_P2_NM,NOTIFY_P2_ATTN ,
                    NOTIFY_P2_ADDR1,NOTIFY_P2_ADDR2, NOTIFY_P2_ADDR3, NOTIFY_P2_ADDR4,
                    NOTIFY_P3_NM,NOTIFY_P3_ATTN , NOTIFY_P3_ADDR1,NOTIFY_P3_ADDR2, NOTIFY_P3_ADDR3,
                    NOTIFY_P3_ADDR4,CREATION_DT, ACCT_ATTN, SCC_IND, CREAT_BY, MAINT_BY
                    VALUES(     R_V_CUST_CD,R_V_ACCT_CD,R_V_CNSGE_CD,R_V_FINALDEST_CD,R_V_TPT_TYPE,
                    R_V_ACCT_NM,R_V_CUST_NM ,R_V_CNSGE_NM, R_V_CNSGE_ADDR1,R_V_CNSGE_ADDR2, R_V_CNSGE_ADDR3,
                    R_V_CNSGE_ADDR4,R_V_CNSGE_ATTN,     R_V_EFFECTIVE_DT ,SYSDATE, R_V_POD_CD,R_V_DELVY_PL_CD,R_V_TRANSSHIP ,R_V_PARTSHIPMT , R_V_FREIGHT,
                    R_V_PREPAID_BY ,R_V_COLLECT_BY ,R_V_BL_REMARK1 ,R_V_BL_REMARK2,R_V_MCC_IND,
                    R_V_NOMINATION,R_V_NOTIFY_P1_NM, R_V_NOTIFY_P1_ATTN, R_V_NOTIFY_P1_ADD1, R_V_NOTIFY_P1_ADD2,
                    R_V_NOTIFY_P1_ADD3, R_V_NOTIFY_P1_ADD4, R_V_NOTIFY_P2_NM, R_V_NOTIFY_P2_ATTN, R_V_NOTIFY_P2_ADD1,
                    R_V_NOTIFY_P2_ADD2, R_V_NOTIFY_P2_ADD3, R_V_NOTIFY_P2_ADD4, R_V_NOTIFY_P3_NM, R_V_NOTIFY_P3_ATTN,
                    R_V_NOTIFY_P3_ADD1, R_V_NOTIFY_P3_ADD2, R_V_NOTIFY_P3_ADD3, R_V_NOTIFY_P3_ADD4,
                    SYSDATE,R_V_ACCT_ATTN,R_V_SCC_IND,R_V_USER_ID,R_V_USER_ID
                    DBMS_OUTPUT.PUT_LINE(' SI - REC -INSERTED');
     END IF;

Hi,
I think there is a part of the stored procedure you did not displayed in your post. I think your issue is probably due to a parsed value from java. For example when calling a procedure from java and the data type from java is different than expected by the procedure the ORA-01403 could be encountered. Can you please show the exact construction of the call of the procedure from within java and also how the procedure possible is provided with an input parameter.
Regards, Gerwin

No Data Found Error in wwv_flow_files

Hello All,
I have written a procedure to upload the .csv file data into one of my database Table. It was working fine some days back, but when I try to upload a .csv today, it gives me error "No Data Found".
This is the Query I am using to fetch the data from wwv_flow_files table:
select blob_content into v_blob_data
from wwv_flow_files
where last_updated = (select max(last_updated) from wwv_flow_files where UPDATED_BY = UPPER(:APP_USER))
and id = (select max(id) from wwv_flow_files where updated_by = UPPER(:APP_USER));
this is returning No data found error.
Please suggest what is the problem.
Apex vesion : 4.0.1.00.03
DB: 11g
Thanks
Tauceef

Hi Trent,
As I said, I am using this code from a long time ago, it was working fine before and I have uploaded many files using this code.
But suddenly I don't know what happen it start giving this error.
For making sure that this statement is the one which is giving "no data found" error I commented all the other select statements
and I still got no data found. So it's confirmed.
One more thing, I tried to run this code in SQL command by hard coding the :APP_USER value and this is what I got in the result:
BLOB_CONTENT
[unsupported data type]
means this code is returning something but at run time it is giving no data found.
Please suggest.
Thanks
Tauceef

No data found error on Form on a Table with report

Hi Everyone, I'm using Application Express 4.1.0.00.32 on Windows 7. I built a Form on a table with report. Earlier I was using rowid as a passing parameter but then I had to change it to primary key column from report to form.
So in the "Fetch row process" I changed the "Items containing primary key value" and "Primary Key column" to P1004_PERSON_ID and PERSON_ID respectively. Which is my primary key.
My Form is working exactly fine but at on point it throws "no data found error".
I have a required date field in the form. So if the user doesn't fill in the date field and try to save the form, it throws the "Feild required error" and then when user enters date and try to save then it throws the error "No data found.". here is the snapshot... snapshot
How can I fix this error.I'm really stuck.
I checked debubber..it is as follows... in debughger it's still showing rowid. I don't know why. How can I fix that.
Execution
Message
Level
Graph
0.00233
0.00932
S H O W: application="101" page="1004" workspace="" request="" session="123235901404364"
4
0.01161
0.00102
Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
4
0.01261
0.00046
alter session set nls_language="AMERICAN"
4
0.01307
0.00042
alter session set nls_territory="AMERICA"
4
0.01348
0.00053
NLS: CSV charset=WE8MSWIN1252
4
0.01401
0.00042
...NLS: Set Decimal separator="."
4
0.01443
0.00053
...NLS: Set NLS Group separator=","
4
0.01495
0.00050
...NLS: Set g_nls_date_format="DD-MON-RR"
4
0.01545
0.00051
...NLS: Set g_nls_timestamp_format="DD-MON-RR HH.MI.SSXFF AM"
4
0.01597
0.00050
...NLS: Set g_nls_timestamp_tz_format="DD-MON-RR HH.MI.SSXFF AM TZR"
4
0.01647
0.00079
...Setting session time_zone to -05:00
4
0.01726
0.00046
Setting NLS_DATE_FORMAT to application date format: DD-MON-YYYY
4
0.01772
0.00060
Setting NLS_TIMESTAMP_FORMAT to application timestamp format: DD-MON-YYYY HH24.MI.SSXFF
4
0.01832
0.00092
...NLS: Set g_nls_date_format="DD-MON-YYYY"
4
0.01924
0.00049
...NLS: Set g_nls_timestamp_format="DD-MON-YYYY HH24.MI.SSXFF"
4
0.01973
0.00083
...NLS: Set g_nls_timestamp_tz_format="DD-MON-RR HH.MI.SSXFF AM TZR"
4
0.02056
0.00099
NLS: Language=en-us
4
0.02154
0.00157
Application 101, Authentication: PLUGIN, Page Template: 5091946581246503
4
0.02312
0.00065
...fetch session state from database
4
0.02377
0.00106
fetch items
4
0.02483
0.00065
...fetched 103 session state items
4
0.02548
0.00194
Authentication check: NTLM (NATIVE_CUSTOM)
4
0.02742
0.00188
...Execute Statement: begin declare begin wwv_flow.g_boolean := f_ntlm_page_sentry_parm; end; end;
4
0.02930
0.00050
... sentry+verification success
4
0.02980
0.00042
...Session ID 123235901404364 can be used
4
0.03021
0.00114
...Application session: 123235901404364, user=VARMAN01
4
0.03135
0.00162
...Check for session expiration:
4
0.03297
0.00075
Session: Fetch session header information
4
0.03372
0.00113
...Setting session time_zone to -5:00
4
0.03485
0.00080
Branch point: Before Header
4
0.03565
0.00598
Fetch application meta data
4
0.04165
0.00081
...metadata, fetch computations
4
0.04245
0.00076
...metadata, fetch buttons
4
0.04321
0.00086
Setting NLS_DATE_FORMAT to application date format: DD-MON-YYYY
4
0.04406
0.00058
Setting NLS_TIMESTAMP_FORMAT to application timestamp format: DD-MON-YYYY HH24.MI.SSXFF
4
0.04464
0.00049

Just an observance... SQL is still showing the rowid instead of the P1004_PERSON_ID ??
where "PERSON_ID" = :p_rowid;
should it not be :
where "PERSON_ID" = :P1004_PERSON_ID:
thx, Bill

Hiding table items in web report when "no applicable data found"

Hi,
i want to hide a complete web item from a web report using web table interface
when i have the situation "no applicable data found".
I cannot use javascript due to requirements in my solution.
can i set some attributes in the START method in the class?
i can see there is an attribute N_NO_DATA which tells if no data is found.
Can i use this in the other methods to hide the complete table including table heading?
Best regards,
Jarle

Hello,
datas are available in the Cube, they are displayed when there is no filter or when only one single value is selected in the filter.
The problem happens when two or more values are selected in the filter.
Example :
The field selected is Profit Center.
Without filter the I can see :
PC1
PC2
PC3
etc...
If I select in filter the value PC1, I can see :
PC1
If I select in filter the value PC2, I can see :
PC2
But If I select in filter the values PC1 and PC2, I can see :
No Applicable Data Found.
BR,
Pedro.

No Data Found Error in Transaction Source Types Form

Hi All,
We are using 11.5.10.2 version of Oracle Apps.
When i navigate to INV responsibility, Setup -> Transactions -> Source Types, upon the opening of the Transaction Source Types form, i get a series of "No Data Found" error pop up messages. I searched in metalink too but couldn't find any resolution for the same.
Does anyone know as to how to resolve this issue? Is there any patch that needs to applied? Kindly help.
Regards,
Hemanth

Hi Julie,
On the "Process Row of..." process, make sure that it is unconditional and that the Delete opertion checkbox is ticked. Deletions from the main table should only be triggered by a DELETE request which should be issued by the "Delete" button.
On the "Apply MRD" process, make sure that the condition is "Request is Contained within Expression 1" and Expression 1 is: APPLY_CHANGES_MRD,SAVE
This process should be triggered by the "Delete Checked" button, which should have a URL target of:
javascript:confirmDelete(htmldb_delete_message,'APPLY_CHANGES_MRD');This triggers the confirmation popup and submits the page with APPLY_CHANGES_MRD as the REQUEST value which should be picked up by the "Apply MRD" process only.
Andy

Getting 'No Data found' Error when clicking the edit link to edit a record.

Application Express 4.2.0
Database: oracle 11g
Hi Guys
I am getting an error whenever i try to edit some of my entries by clicking the edit link, i have a composite Primary key attributes of three columns ( Budget Year ('YYYY'), Training Name('VARCHAR') and Emp Code ('VARCHAR')
Some records will load when i click Edit but some wont and return 'ORA-01403: no data found' error.
Any help will be appriciated.
Thanx
MATT

Hi,
Please create example about problem to apex.oracle.com and share developer login details to workspace.
Regards,
Jari

No data found Error

Hi all ,
Following code throwing no data found error.
It is working properly for IF x <> 0 condition but when count(*) is 0 then it's thrrowing error.
earlier same code working properly as our client is using this application.
code on when_button_pressed trigger:
DECLARE
user1 VARCHAR2(20);
x NUMBER(4);
BEGIN
FOR c1 IN( SELECT COUNT(*) x
FROM vinay.file_proc
WHERE sector = :sector
and block = :block1
and plot_no= :plotno
and plot_size = :plotsize)
LOOP
x := c1.x;
END LOOP;
IF x <> 0 THEN
MESSAGE('Record Exists');
MESSAGE(' ');
RAISE FORM_TRIGGER_FAILURE;
END IF;
MESSAGE(' after if');
MESSAGE(' after if');
win_api_utility.copy_file(ltrim(rtrim(:ADRIVE1)),ltrim(rtrim(:DESTINATION)),TRUE,TRUE);
MESSAGE(' copy file');
MESSAGE(' ');
SELECT user INTO user1 FROM DUAL;
INSERT INTO vinay.file_proc values(:sector,:block1,:plotno,:plotsize,user1,sysdate);
COMMIT;
MESSAGE(' ');
CLEAR_BLOCK(NO_VALIDATE);
END;
:block2.path1:=:global.drive1;
GO_ITEM('BLOCK2.ADRIVE');

Hi,
I think there is a problem with WIN_API_UTILITY.copy_file can anybody tell me if there is any restriction with this package.

No applicable data found - Error in BEx

Similar Messages

Maybe you are looking for