No application server found in the server

application not found
Hi all,
I have download liferay-portal-ent-3.0.0.ear from http://www.liferay.com and deploy its ear file on oracle application server 10g,it work properly,but when I restart its instance of OC4J ,
it message is:No application named 'liferayportal' found in the server
so I have to redeploy it.
can any one help me?
what should I do?
thanks

Hello,
Did you get LifeRay to work?
Thanks.

Similar Messages

No persistent store with the logical name could be found on the server

Weblogic 10.3.6 standalone server (no cluster).
I want to move ejb timers persistence from the default store to DB.
I created a new data source, non-XA, global transactions not supported, targeted to my managed server. Tested configuratiion against DB: OK.
I created a JDBC persistent store (type JDBCStore), attached it to data source, targeted to my managed server, committed changes OK.
In my application, TimedObject is implemented by a Stateless Session bean.
I modified the weblogic-ejb-jar.xml descriptor for my SLSB specifying the persistence store name:
<stateless-session-descriptor>
 <timer-descriptor>
 <persistent-store-logical-name>MyStore</persistent-store-logical-name>
 </timer-descriptor>
When I deploy my application, I get the following error
[EJB:011112]Error initializing the EJB Timer store for the EJB '...' The weblogic-ejb-jar.xml deployment descriptor or annotation for this EJB contains a persistent-store-logical-name setting but no persistent store with the logical name 'MyStore' could be found on the server 'yyyy'.
Why ?

Hi JB,
The OTM schema has been created on an external database and not on the embedded XE database. Using 'Oracle Application Testing Database Configuration' we were able to successfully configure the said DB. We are able to use OTM through the 'Oracle Test Manager - Win32 Client' also. We are being held up by the above error when we attempt to deploy and use the server based OTM application.
Do we need to configure the above Schema under the Weblogic console also?
Regards,
Aniket.

Error message "... could not be found on the server."

I have been subscribed to a podcast for 3 years. I received an error message for that subscription recently stating,
"There was a problem downloading "Civil War Podcast by Dr. James Robertson Jr. from WVTF. The URL http://www.wvtf.org/news_and_notes/feeds/wvtf_cw_rss.php could not be found on the server."
Something else that may or may not be related, for months I haven't been able to find this specific podcast in the iTunes store when I search for it. However, my iTunes continued to download current podcasts.
What does this mean?

I believe WVTF changed the podcast feed URL. I went to their website http://www.wvtf.org/index.php?option=com_content&view=category&layout=blog&id=44 &Itemid=160&limitstart=5 and got the feed URL and entered it directly under Advanced -> Subscribe to Podcast. The URL I used is http://www.wvtf.org/index.php?option=com_podcast&view=feed&format=raw
Good luck, Chris

I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.com

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

The URL "^0" could not be found on the server.

I am new at all of this so forgive me for my lack of knowledge on ipods. I just got a new ipod 30GB and just purchased a movie on iTunes. I tried to download it but said "There was a problem downloading". The URL "^0" could not be found on the server. Don't know what this means. Can anyone help me out on this? Thanks
Other OS

I get that every now and then when making a purchase at iTunes store. What I usually do is reorder the product and iTunes acknowledges that an attempt has been made, that it will retry the download. However that was iTunes 6...I cannot say the same for iTunes 7 (which as you know is full of bugs).
ITUNES 7 IPOD RESTORE
iTunes 7 seems not to come with the iPod updater in the installation package and the restore program as well. Apple forces you to have an online connection. One of my computers has no internet connection and if I try to restore my iPod, all I get is an error. APPLE JUST SCREWED UP EVERYTHING WITH ITUNES 7.

What does this mean? Server Error in '/BoardPortal' Application. Runtime Error Description: An application error occurred on the server. The current custom err

Server Error in '/BoardPortal' Application. 
Runtime Error 
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
 
 
<pre><nowiki>
<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
</nowiki></pre>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
 
 
<pre><nowiki>
<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration></nowiki></pre>

That is a problem on the web server that you are trying to access. 
This may need to be fixed at that server.
Try to clear the cache and the cookies from sites that cause the problems to see if that helps.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"

Err 404 The URL could not be found on the server

I attempted to purchase a song and got this error message, error 404 the URL could not be found on the server. Now every time I download any song, it attempts to find the song and gives me the same error message. I don't care if I lose the song. I would just like to make it stop trying to download it.
Any ideas?

I've the same problem, and I've reported for the problem, but I received an non-reply, such as "do you have a good internet connection?", etc...
When I start iTunes, it ask me for my iTunes Store password, then it try to download the missing file I have buyed, but always with the same error message: There was a problem downloading "Fool to Cry / Sucking In the Seventies / The Rolling Stones". The URL "http://a438.phobos.apple.com/r10/Music/y1969/m12/d31/s06.dwrnogas.a.mp4" could not be found on the server.

Couldn't be found on the server

I am trying to update my Mac Pro and this message keeps coming up: The file “SecUpd2013-002.pkg” couldn’t be found on the server “swcdn.apple.com”. I have updated my Mac many times and never had this problem before! Help!

Hi there alysha.perreault!
I have a couple links for you to help get that security update downloaded. These are links that you can use which are direct from Apple and will help you if you can't download your updates from the "Software Update" section on your computer or from the App Store "updates" section. There are three different link for each operating system from Snow Leopard up to Mountain Lion, and they can be found here:
Security Update 2013-002 (Snow Leopard)
http://support.apple.com/kb/DL1660
Security Update 2013-002 (Lion)
http://support.apple.com/kb/DL1661
OS X Mountain Lion Update v10.8.4 (Combo)
http://support.apple.com/kb/DL1659
Just FYI, if you are using Mountain Lion, the security update will be included in the 10.8.4 Combo update. Thanks for using the Apple Support Communities!
Cheers,
Braden

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)

Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
          •          Server name: imap.mail.me.com
          •          SSL Required: Yes
          •          Port: 993
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
SMTP (outgoing mail server) information:
          •          Server name: smtp.mail.me.com
          •          SSL Required: Yes
          •          Port: 587
          •          SMTP Authentication Required: Yes
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

Unknown Host Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no

Hello,
Today i tried accessing transitbux.com with mozilla, but i'm getting this kind of a error as mentioned below:
Unknown Host
Description: Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.
Can anyone help me please, and the same website is accessible with my phone.
Help me please. :(
Regards
-

Try http://www.transitbux.com/
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

Since upgrade to Mac OS 10.7.2L , recurring error message: "There was a problem connecting to the server "servername". The server may not exist...etc."

Since upgrade to Mac OS 10.7.2 Lion, on MacBookPro, recurring (every minute or so) error message: "There was a problem connecting to the server "servername". The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network conneection, and then try again." (The server specified is no longer connected or used). The error message must be clicked twice to continue to work on the computer. Time Machine is switched off. No external disks are connected. Keychain entries for "servername" have been removed since the problem arose. Is there any way to prevent this error message?

I am having the same problem; have tried deleting some of the plist files as others suggested but to no avail. Tried turning off time machine - that didn't fix it either. Very dispappointing.

RADIUS-3-NOSERVERS: No radius hosts configured or no valid server present in the server group

Hi,
I currently have an C2960 switch with IOS 15.0(2) SE4. To log on the CLI of the switch authentication against a RADIUS server takes place. Accounting is not wanted. The config of the switch is as follows:
aaa new-model
aaa group server radius RADIUSGROUP
server xxx.xxx.xxx.1 auth-port 1812 acct-port 0
server xxx.xxx.xxx.2 auth-port 1812 acct-port 0
aaa authentication login default group RADIUSGROUP local
aaa authentication dot1x default group RADIUSGROUP
aaaauthorization network default group RADIUSGROUP
radius server host xxx.xxx.xxx.1 auth-port 1812 acct-port 0 key 7 [encrypted password]
radius server host xxx.xxx.xxx.2 auth-port 1812 acct-port 0 key 7 [encrypted password]
It works fine, the authentication and the login are successful, but every login generates a message in the logging of the switch:
RADIUS-3-NOSERVERS: No radius hosts configured or no valid server present in the server group
What is going wrong???
Any help would be appreciated.

That's going to be something you are going to have to go the cisco TAC with . That looks to be some kind of software bug. Also a feature probably not a lot of people actually use and have knowlwedge about.

Complier error concerning Client Server Application. Error in the server

Hi I am trying to implement a client server application that will carry out basic calculations. However I am recienving this compiler error within the server class.
unreported exception java.io.IOException; must be caught or delcared to be thrown.
The code is pasted below.
Your help would be much appreciated.
Kind Regards
Ridha
import java.io.*;
import java.net.*;
import java.util.Hashtable;
public class Server
 public static void main(String []args)
 ServerSocket calcServer = null;
 try
 // Create a socket on server
 //ServerSocket ss = new ServerSocket(7);
 calcServer = new ServerSocket(7);
 catch (IOException e)
 System.out.println("Could not listen on port: 7.");
 System.exit(1);
 System.out.println("The Server is Running");
 // When clients connets, make the link and carry on
 Socket clientSocket = null;
 try
 clientSocket = calcServer.accept();
 catch (IOException e)
 System.err.println("Accept Failed");
 System.exit(1);
 // hashtable to manage list of online and offline users
 //Hashtable tOnlineUsers = new Hashtable(10);
 //Hashtable tOfflineUsers = new Hashtable(10);
 // Now start accepting connections from clients in a while loop
 // The server should run in an infinite loop
 // to get data to and from server
InputStream in = clientSocket.getInputStream(); < my error is here
 BufferedReader br = new BufferedReader(new InputStreamReader(in));
 OutputStream out = clientSocket.getOutputStream();
 PrintWriter pr = new PrintWriter(out, true);
 while(true)
 Worker w = new Worker(clientSocket);
 w.start();
 } // End of while
 }// End of main()
} // End of class

well, using my superb powers of reasoning and deduction, I can say that this is a lemon entry, watson. the line you kindly highlighted can potentially throw an IOException which you are not dealing with. deal with it

How to deploy Visual composer applications and set up the server

Hi ,
I have SAP Netweaver developer studio client installed on my Laptop and I can use it to create VC applications but I cannot visualise the applications since I don't have server.
Is there a server that I can install and configure? and what else do I need before I can successfully deploy visual composer applications.
thanks

Hi Bhat,
Please ping server whether it is reachable or not.
Please enter IP and host name in the host file (Start>>Drivers>>etc>>host file)
Then enter host and instance number in NWDS. then open server view through open perspective, it will show you whether server is up or not.
Hope this will helps you.
Regards
Arun

Webmail is turned off. You can turn it on by using the Server app on the server.

Not sure why this suddenly happened. Nothing has really changed on this server. The web IS on (hence receiving the message above) and I have "Enable PHP web applications" checked. Mail is routing fine. Just not sure why the webmail suddenly quit working. I ran the "/System/Library/ServerSetup/CommonExtras/PostgreSQLExtras/WebmailServerSetup.s h" and it completed but no luck. Is there a script to reset just the webmail?

So, I've done some more digging. Thank you Apple, for thoughtfully providing documentation on your included software! All you told me was that to enable webmail I had to check one box in the Server App.
Sigh.
Okay, rant off. It's pretty obvious from the log entries I posted that both a user and a database are missing from postgres. After some searching I found an INSTALL document, that says this:
* PostgreSQL
To use Roundcube with PostgreSQL support you have to follow these
simple steps, which have to be done as the postgres system user (or
which ever is the database superuser):
$ createuser roundcube
$ createdb -O roundcube -E UNICODE roundcubemail
$ psql roundcubemail
roundcubemail =# ALTER USER roundcube WITH PASSWORD 'the_new_password';
roundcubemail =# \c - roundcube
roundcubemail => \i SQL/postgres.initial.sql
All this has been tested with PostgreSQL 8.x and 7.4.x. Older
versions don't have a -O option for the createdb, so if you are
using that version you'll have to change ownership of the DB later.
Okay, good...except it doesn't tell me how to get to the $ prompt for entering the first set of commands. On a hunch I tried just typing "postgres" at the command prompt and got this:
postgres does not know where to find the server configuration file.
You must specify the --config-file or -D invocation option or set the PGDATA environment variable.
I Googled that whole section as my search item and about the only relevant thing I got was info on how to set one's environment variables--which I already know how to do. What I don't know is where this variable is supposed to point.
Okay, I'm at my limit, I've run out of fingers to hold on various bullet points. Is there some clear, concise how-to on setting all this up that doesn't assume I already know half this stuff?

No application server found in the server

Similar Messages

Maybe you are looking for