No ariprint on the HP officejet 6600

According tot specificaties on the website this machine should work with Airprint. I have tried everything without result. My older printer HP Laserjet 100 color MFP M175 did the job. This printer does not!
I did see it appear for a very short time on my Iphone but the print button was grey when I selected it. After a while (it seems to try to connect) it disappears again. After that the only printer in the list is my old HP Laserjet.
This proves everything works just fine, al but my new printer that is.
Do yot have a solution?

Hi,
Do you have the latest firmware installed on your printer?
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02919168&lc=en&product=5304873&tmp...
Also try following the Causes and Tips sections below and check uf that may helps:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03742109&lc=en&product=5304873&tmp...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Paper Jam and Scanning issues for the HP Officejet 6600

Had to warranty my printer for same issue and refurbished one is worse.

Hi @Uguessedit,
Welcome to the HP Forums!
I am sorry to hear that your HP Officejet 6600 refurbished printer is worse than your previous printer, but I am happy to help!
For further assistance, I will need some additional information:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies. Copying a Multipage Original in Order (Collating).
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
What type of scanning issues are you having? Are you getting any errors?
In the meantime, please see this guide, A 'Paper Jam' Error Displays on the HP Officejet 6600 e-All-in-One and 6700 Premium e-All-in-One Pri....
Thank you for posting, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Poor quality Photo printing with the HP Officejet 6600

Is anyone having a problem with the HP Officejet 6600 having very poor quality photo prints?

Hi HereInJersey,
Welcome to the HP Support forums. I understand that printed photos from your Officejet 6600 don't have the quality that you expect.
I have included the "Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems" troubleshooting document. It has detailed steps to take to improve the quality of your print jobs.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Officejet 6600 LOCKED AND DISABLED WIRELESS -- Im the System Admin?

I am the system admin and I somehow disabled my wireless and locked the HP Officejet 6600 down. I can not restore to defaults. I can't do anything with the printer? Can someone help? MacBook Pro Latest version of software.

Hi DG13,
Welcome to the HP Support Forums! I see you have disabled the wireless settings on your MacBook Pro and have locked the HP Officejet 6600 down. Please follow the steps listed below:
1. Plug in your USB (You will need a USB to re enable the wireless settings)
2. Select the Device Administration section
3. Now re enable the wireless and whichever features you had disabled
Please let me know the outcome, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

New HP Officejet 6600 won't scan to MacBook Air

I bought new HP 6600, downloaded all the drivers set it up and it worked perfectly - for one week. I've now uninstalled and reinstalled drivers. My MacBook Air sees the printer and I watch it scan and see the text on my computer screen, but not saved in folder or in my Finder window?
Thanks to anyone who can help. My first time ever on this site.
David

Hello @dbvancouver and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would like to help.
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend reinstalling the HP Officejet 6600 e-All-in-One Printer - H711a/H711g Drivers.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP OfficeJet 6600 H711g HP Solution Center software for Windows 8.1

I have an HP Officejet 6600 H711g printer. No installatin discs were included with the printer. I downloaded the installation files from the HP website. However, apparantely the HP Solution Center software was not included in the installation files. The HP Solution Center shortcut is located on my desktop but when I access it i get a message that my instalation is not complete. I have tried downloading and installing again (without uninstalling current files) but the Solution Center is still not available. Can somone please help. I'm not sure where to go from here.
Thank you
This question was solved.
View Solution.

Hi,
The HP Solution Center is not a part of the software for the HP Officejet 6600, it is a part of your previous HP printer's software.
From the windows 8 screen type HP and open the HP Officejet 6600 software, the HP Printer Assistant which is the software for your current printer will launch.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Re: How do I do a reset on a Officejet 6600 e-All-in-One C155A

I can not use the touch screen as it allways says, missing or failed print head with the setup catriages in, and it wont recognize new catriages.
This question was solved.
View Solution.

Hello @bk85,
Welcome to the HP Support Forums!
I understand that you're getting the message 'Missing or Failed Printhead' on the front panel of your HP Officejet 6600 e-All-in-One Printer. I would like to offer my assistance today with resolving this error message. Now, you indicate in your post that you are getting this error message while using the Setup Cartridges in your printer. If your printer has never been used before you must use Setup Cartridges to initialise the Printhead system within your printer. However, if you have used the HP Officejet 6600 in the past with the Setup Cartridges, than you can use new cartridges without issue in your machine. In saying that, the Printhead message that you're getting refers to the part that the cartridges fit into. The Printhead 'reads' the cartridges and put ink on the page. If the Printhead is defective within your printer, new cartridges will not resolve this issue. Rather, a whole unit replacement may be needed as the Printhead is a non-replaceable part within your printer.
Can I please have you click here to access the troubleshooting step designed to resolve this error message. Should the error persist after performing the reset than a replacement printer would be needed. If you require a replacement I would strongly recommend contacting our Technical Support queue by phone to explore additional hardware options.
HP Technical Support can be reached at: 800-474-6836.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
HP Worldwide Contact
Please let me know if the reset resolves the Printhead error you're receiving. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Unable to connect to HP Officejet 6600 after printer enters sleep mode

Actiontec MI424WR wireless router
HP Officejet 660
Dell XPS 8300 (Windows 7, Windows Firewall, Microsoft Security Essentials)
IP Address range: 192.168.1.x
Printer is assigned static IP address
The HP Officejet 6600 printer is easy to set up and works great...for about 15 minutes. Then the printer goes to sleep and the wireless connection dies. Repeatedly. I am never able to restore the wireless connection without rebooting the printer, computer AND the router. I've been dealing with this issue off and on since I purchased the printer four months ago.
I can see from forums that I am not the only one with this issue. What I can't see (anywhere) is a solid fix for the issue.
I can tell you:
1. It's NOT the windows firewall. I've tried it with the firewall on and the firewall off.
2. It's NOT the antivirus software. I've tried it with the service running and the service stopped.
3. It doesn't matter whether the IP address is statically assigned or assigned with a DHCP reservation (though you do need to do one or the other)
4. Adding an ARP static entry helped a little bit to get rid of the "Host reports destination unreachable".
5. It doesn't matter whether the Bonjour service is running or not.
6. It doesn't matter whether the printer is configured for wireless direct printing or not.
7. I updated to the most recent firmware for the printer: that didn't help.
8. I'm positive that the printer is connected to the wireless router correctly.
I ran telnet from my pc to the printer (on port 80) and received no response. I can only conclude that somehow, there's a service that's supposed to be running on the printer that has died or that fails to register properly with the router.
Right now, I'm back to a direct connection between the printer and the computer (usb cable). Which means I can only print from the one device.
I have no intention of purchasing another HP product any time soon. I'll be sure to go out of my way to find knock-off cartridges as well.
Ugh.

Just to verify, what is the DHCP range in the router? Starting and ending addresses? What is the printer static IP at?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP Officejet 6600 and Outlook 2007 unable to send scan to email

Hi,
I am unable to scan (HP Officejet 6600) from my comuter to Outlook 2007. I used to scan whatever I am scanning for the day from my HP Officejet 6600, and then I would see my scan finished then I would hit email scan. I would then recieve multiple errors.
Here is the process; HP Scan (save) and then I get an error: The HP Scan application is unable to open your application and/or cannot attach the scan to a new email. Please check you email configuration and try again. I then select (Next) I select "OK," which then provides me with another error: This action is not supported while an older version of Outlook is running.
Therefore, can somebody help me?
Thank you,
Joe Martinez

Hi Joe,
First, try reinstalling the latest HP software.
From Programs and Features uninstall the HP Officejet 6600 Basic Device Software, next dowload and install the latest software below, then check for any difference:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108845-4&cc=us&dlc=en&lc=en...
If the issue remain ensure that Outlook is set as the default program.
From the Control Panel select Programs, then Default Programs.
Select Outlook 2007 from the left pane, ensure it shown as "Outlook have all its defaults", otherwise click the button to set all the defautls for outlook and check again.
If there is still no change I suggest trying the Hotfix for outlook below, be sure to follow the entire Resolution Section:
https://support.microsoft.com/en-us/kb/813745
If there is still no change I recommend repairing Office / Outlook and check if that may help, otherwise you may need to Reinstall the software.
You may follow the steps to repair Outlook 2007 below:
http://www.companionlink.com/support/kb/Repair/Re-install_Outlook_2003,_2007,_2010
Hope that may help getting the issue resolved,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Busy signal when faxing with hp officejet 6600 all-in-one

I keep getting a busy signal when faxing with all numbers.

Hi @pbr69,
Welcome to the HP Forums!
I noticed that you are getting a busy signal when faxing with the HP Officejet 6600, and I am happy to help!
I would recommend to look through this faxing guide, to make sure it is properly configured. Cannot Send or Receive Faxes.
Also depending on the type of phone connection you are using you may require a different type of configuration. Please also see, How to connect your HP Fax Device to an ISDN, ADSL, PBX, or VoIP line, if you are using one of those types of lines.
Hope this information helps, and have a wonderful day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Officejet 6600 - Cannot Print from any application since Vista Update on 10/15/14

Our wireless connected printer had been working fine. On 10/15/14, updates from MS were installed. After that, we can generate test pages from HP Printer Assistant but no other application prints. That includes all MS Office projects, notepad, and any web browser.
We've run the HP Print Doctor and it indicated that there are no problems. We have since attempted to restore to the last checkpoint before the install and the restore fails.
Has anyone else run into this problem?

Hey @KPL12345 ,
Thank you for taking the time out of your day to ask that question on the HP Forums today!
I understand that you are experiencing no response from your printer after upgrading to Windows Vista.
Try uninstalling the software using this document >>Uninstalling the Printer Software
Installing the software using this document >>Setting Up the Printer for a Wireless or Wired Network for the HP Officejet 6600 e-All-in-One and 67...
After you have done that, try to print. If you can not print then run the Print and Scan Doctor again.
Hope this helps, let me know.
I worked for HP.

Opening icon of HP Officejet 6600

When opening the icon of the printer, I used to get a number of options on the screen, eg printing, scanning, cartridge state, etc. Now all I get is Connect to a new printer and add software. How can I get the original images back please?

Hello normang1,
Regarding the issue with the HP Officejet 6600 icon not loading the selections you have once had I would like to help. Can you please let me know what the Operating System is installed on the computer Windows or Mac.
What happens if you go through the steps to connect a new printer?
Thanks,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Officejet 6600 - Does Not Print

My iMac is 10.6.8
I've had the HP OfficeJet 6600 for about 6 months, and have printed maybe 100 sheets of paper on it. The last 2 months it has been increasingly slow in beginning to print. Today, it won't do it at all.
All ink cartridges are above 80% (3 of the 4 are full), and the printer shows up on the wireless connection on my computer, and the computer is reading all the print levels/printer info.
When printing, the dialogue box says that the document is printing, but nothing happens with the printer. I've waited 10 minutes on several attempts and nothing happens.
I've followed each troubleshooting step here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02205477&tmp_task=solveCategory&cc=us&dlc=en&la...
Nothing is working.
Thanks for any help.

Hi,
While the printer connected to your network, can you see the pritner listed as Bonjour or not?
Try adding the printer by IP and check if that may make any difference:
Under Print & Scan click the plus sign.
Click the IP tab.
Select the HP jetdirect Socket protocol.
Type the pritner IP address into the address field.
You may locate the IP by clicking the wireless icon on the printer.
Now try printing using the newly created print queue.
Additionally, please let me know your router brand and model in order to better understand what may cause the problem.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Officejet 6600 is not shared with the Homegroup

HP Officejet 6600 does not print from computer. Will print wireless from another device. Error message is
"HP Officejet 6600 is not shared with the Homegroup". It also give a error message on the screen that there is a problem with the device on the USB port. Have re-installed the driver several times. HELP

Hello Tonicc,
Welcome to the HP Forums.
I see that you are having an issue with sharing the printer.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

I recently purchased an HP officejet 6600 and whenever I put in the disk to install the printer nothing pops up. How do I run the disk on my 2011 MacBook Pro?

I recently purchased an HP Officejet 6600 and whenever I put the disk in to install the software nothing happens. How can I run the program to install it and get started using my printer???

You should be able to go to HP Web site and download the installer. It sounds like you got a bad CD.

No ariprint on the HP officejet 6600

Similar Messages

Maybe you are looking for