No arrange option for Displays

I am using Keynote for presentations and want the presentation option on my laptop. When I have the laptop connected to the projector and go to OS X Display Preferences there is not an option to arrange the displays.
How do I disable the mirroring function?
Dennis

Dennis,
You have to do this via system preferences. Click on the Apple in the upper left corner of your screen. Select System Preferences. Then select Displays. If you have more than one display connected, you will have the option of clicking on a Mirror checkbox. If it is checked, you'll see the same thing on both laptops. If you uncheck it, you can display your notes, current slide, upcoming slide, etc. on your laptop, and your slides on the other screen.
I hope this helps.
Mike

Similar Messages

T510 missing options for display resolution

I am looking to order a T510. Lenovo site does not show options for display resolutions any more. I need WUXGA, how do I verify this before placing an order?

Hi vijpersonal,
There is no T510 with WUXGA. WUXGA is 1920x1200, but the new Thinkpads got FHD which is 1920x1080. As far as i understand it's hard to get a T510 with FHD at the moment. Seems like Lenovo have some delivery problems for models with the FHD panel. If you search for FHD in this forum you can find a lot of discussions about that topic. I'm sure the FHD will be available soon, but don't know when that might happen. You can also get the W510 with the FHD panel and those should be possible to buy now.
You can find the Thinkpad Notebooks pdf using this link: http://www.lenovo.com/psref/
Then you can find detailed spec for a lot of Thinkpads. I don't think you will find any T510 with FHD at the moment though.
Also i'm not sure where you are looking since i just checked shop.lenovo.com and for each of the models the resolution are specified.
-gan

Why doesn't Energy Saver have an option for displaying "Time" in the menu bar?

Why doesn't Energy Saver have an option for displaying "Time" in the menu bar?

I'll provide some Proof
Link 1
Link 2
Link 3
you are not the only person with this problem maybe it will come back in Mountain Lion who knows.

Sleep option for display only yosemite 5K iMac

Hi
I've used a macbook in the past on snow leopard and lion and these had independent sliders for display and computer sleep. My wife bought me a 5k retina iMac at the weekend (i was shocked) and notice it only has a slider for display sleep.
Is this normal behaviour for yosemite on a new iMac? I see there is an option to prevent sleeping when the display is off, so does this mean effectively as soon as the display goes off the computer sleeps? Not good if you are using plea media library on your mac..
Thanks for any advice.

I noticed the same issue and cannot find any information as to when the iMac actually goes to sleep. It's unclear to me whether "Display off" = Sleep or not.
Meanwhile, there is a nice tool called "Caffeine" on the Mac App Store that will work well for you and your Media Server issue: https://itunes.apple.com/de/app/caffeine/id411246225?l=en&mt=12

Options for Displaying Reference Attribute in AdvancedTable Record

Hi,
I'm looking for options for including reference attributes within an advanced table records as just another column. Specifically how can I include a lookup meaning column in a detail advancedtable component when the lookup meaning is not in the VO?
Some options I've thought of are:
1. Change the VO to be defined with the lookup meaning by using "Expert Mode" and adding the joins. This will not work because I need to change detail VO attribute via a controller/am method and (due to a bug) the change will not be saved to the database.
2. Create an EO for the lookup entity and an AO to associate the detail EO with the lookup EO. Then create a VO that is based upon both of these entities. The problem I ran into with this option is that when the lookup code in the detail VO attribute is changed OAF tries to look for the old lookup code record in the detail VO and it will not find it and throws a error on the page.
3. Create another detail advancedtable component in the detail VO advancedtable component. Since I need the value within the detail advancedtable record and this would place it in a new detail this will not satisfy the requirement.
Thank you

If UOM is also changed with qty then old & new UOM should be available in CDHDR & CDPOS.
If not then display current UOM.
This logic will fail if UOM is also changed several times without changing Qty, which normally does not happen. So you can confirm with business, if this much info is enough.
Making logic to work in case UOM is also changed several times, would require quite complex logic & will affect performance badly.

I have osx 10.6.8 and have lost the side scroll bars on Safari. When I go into System Preferences there is NOT an "always" option for displaying Scroll Bar. How do I get it them to display again?

When using Safari the scroll bars no longer appear on the right hand side. When I go into System Preferences the option to Always have the scroll bars displayed is NOT there. How/Where do I go to get these to show all the time?

It SHOULD be under the General tab in System Preferences:
(Note that this is a Mavericks screenshot, but it should be there in Snow Leopard, too, if indeed you're still running 10.6.8 as your profile says)
Clinton

Need more options for display

Is it possible to add more option like "default date format mask" for results that are output in the grid?
I am using this product since this AM and I already love it.
ps: Will this be the right forum to request nwe enhancements?
Raj

we have logged this as an enhancement request. This is a great place for enhancement requests; one person sugested using a single thread for enhancement requests, and created a thread called enhancement requests; but we will take good ideas any way we can.
Mike

Display "Arrangement" option

The arrangement option on displays is no longer there. what do i do? running 10.6.8 OSX Only shows "Displays" & "Color"

Recently updated my MacBook (MB) (late 2009) OS from SL to Lion. With SL was able to connect to a projector no problem using the Optoma WPS-2. This device plugs into the projector's VGA port and uses wifi connection to communicate with the MB. Now what gets projected is simply the MB cursor on a black screen, and a trail of the cursor as it moves around the MB screen. Others have suggested going to the arrangement tab, to change to extended or mirror display - but no such luck.
This is what I get.
Any suggestions? Very frustrated and probably going to downgrade to SL. But that seems like such a hassle as well.
Thanks in advance

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

Hi jenette,
If you are having issues using an HDTV via HDMI as an external display to your MacBook Air, you may find the following article helpful:
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
(Note: You will generally only see the arrangement option in Displays when you are configured to use the external display in Extended Desktop mode; there is no arrangement in Mirroring as both screens are showing the same image.)
Regards,
- Brenden

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!

I want to connect my IMAC to TV with HDMI cable. I did it before going to Dispaly and Arrangments and then mirror. Now when I go to display I dont have to option of arrangements. Olny {Display and Color} pops up. Any ideas what happend to arrengements?

I want to connect my IMAC to TV with HDMI cable. I did it before going to Dispaly and Arrangments and then mirror. Now when I go to display I dont have to option of arrangements. Olny {Display and Color} pops up. Any ideas what happend to arrengements?

For the "Arangements" option to appear, the external display must be turned on with the correct input selected and connected to the computer. Then close system prefs, reopen, go to "Display" and "Arrangement" will be along the top.

What is the corresponding option for " Table Display" in BI 7 Query Design

Hi Experts,
In 3.x Query Designer we have an Option of " Table Display" to arrange the charesterstics in the Coloums .
Please let me know the corresponding option in BI 7 Query Designer.
Thanks
Bhanuprakash.

I think there is no Drill down Fesility in Report Designer. what is the option for a query with Drill down charecterstics.

Is there a key on the MacBook Pro to toggle display options for a projector

I have had some difficulty getting my InFocus projector to consistently work correctly with my MacBook Pro. Is there a key on the MacBook Pro that toggles the options for projector display? There was one on my last MacBook and my previous PowerBook.
Thanks -
Dudley Warner

No, there is no longer a key to control external display modes (it's F7 on my 1st gen MBP, but the option was removed along with the embedded numeric keypad in the Early 2008 models). There's not a substitute keyboard shortcut (with the exception of installing a macro player like Keyboard Maestro). Your main option is System Preferences > Displays (as stated, ticking the box to show Displays in the menu bar provides a helpful shortcut).

Drop down option for an output field in an ALV display

hi,
how to provide a drop down option for a field in the output of an ALV Grid display........
Thanks in advance

Hi Deepthi,
Please refer this program BCALV_EDIT_07 and BCALV_EDIT_06.
This will help you in your program
Reward Points if Useful
Thanks
Vishwanath Purohit

NO-DISPLAY option for Radio buttons

Hi All,
I want to hide the 2 radio buttons on the selection screen using the NO-DISPLAY option. when i worked with that its giving an error like 'no-display and radio button group can be specified together'.
my question was is it possible to use NO-DISPLAY option with radio buttons?
Thanks
Kumar.

See this sample code
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-h01.
*Radio button for Process PO invoice
PARAMETERS : rb_po RADIOBUTTON GROUP inv USER-COMMAND rad.
" PO Invoice
*Radio button for FI Invoice
PARAMETERS : rb_fi RADIOBUTTON GROUP inv.
" FI Invoice
*Radio button for Process PO & FI Invoice
PARAMETERS : rb_pofi RADIOBUTTON GROUP inv.
" PO & FI Invoice
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
 s_bukrs FOR rbkp-bukrs, "Company Code
 s_ekorg FOR ekko-ekorg NO INTERVALS MODIF ID md2,
 "Purchasing Org.
 s_ekgrp FOR ekko-ekgrp NO INTERVALS MODIF ID md2,
 "Purchasing Group
 s_werks FOR rseg-werks NO INTERVALS MODIF ID md2,
 "Plant
 s_lifnr FOR rbkp-lifnr NO INTERVALS,
 "Vendor
 s_matkl FOR ekpo-matkl NO INTERVALS
 MODIF ID md1,
 "Material Group
 s_belnr FOR rbkp-belnr NO INTERVALS,
 "Invoice Number
 s_ebeln FOR rseg-ebeln NO INTERVALS MODIF ID md2,
 "Purchasing Document No
 s_gjahr FOR rbkp-gjahr NO INTERVALS,
 "Fiscal year
 s_budat FOR rbkp-budat NO INTERVALS,
 "Posting date
 s_blart FOR bkpf-blart NO INTERVALS,
 " Document Type
 s_bldat FOR bkpf-bldat NO INTERVALS,
 " Invoice Date
 s_usnam FOR rbkp-usnam NO INTERVALS.
"User
*Report type
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF LINE.
*Radio button for User Report
PARAMETERS : rb_user RADIOBUTTON GROUP za DEFAULT 'X' USER-COMMAND rad MODIF ID md2."User report
SELECTION-SCREEN COMMENT 3(20) text-003 FOR FIELD rb_user MODIF ID md2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
*Radio button for Managing Report
PARAMETERS : rb_man RADIOBUTTON GROUP za
 MODIF ID md2.
"Management Report
SELECTION-SCREEN COMMENT 3(20) text-004 FOR FIELD rb_man
 MODIF ID md2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN OUTPUT.
* Checking Radiobuttons and modifing Material Group field .
PERFORM f13000_check_radio.
FORM f13000_check_radio.
* When the FI button is selected hide the fields under group md1 and MD2
LOOP AT SCREEN.
 IF screen-group1 = 'MD2'
 OR screen-group1 = 'MD1'.
 IF rb_fi = c_x
 OR rb_pofi = c_x.
 screen-active = 0.
 ELSE.
 screen-active = 1.
 ENDIF.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
* If the user output radiobutton is checked then make the screen
* input of Material Group off
 LOOP AT SCREEN.
 IF screen-group1 = 'MD1'.
 IF rb_user = 'X'.
 screen-active = 0.
 ELSE.
 screen-active = 1.
 ENDIF.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
IF rb_user = 'X'.
* When display for material group is off
* then refresh the select option for material
* group
 REFRESH s_matkl.
ENDIF.
ENDFORM. " f13000_check_radio
hope this helps.

No arrange option for Displays

Similar Messages

Maybe you are looking for