No arraymanager icon displayed

Installed the latest version of TTA on linux, there are no arraymanager
and objectmanager displayed when logged in as administrator
Any idea?
Thanks

Do you see an Object Manager icon?
in any case, run
$ tarantella setup
answer N to the first question and then Y to the question about
recreating objects. Then try login again as Administrator.
Thanks,
Henry Ma wrote:
Installed the latest version of TTA on linux, there are no arraymanager
and objectmanager displayed when logged in as administrator
Any idea?
Thanks

Similar Messages

Calendar Tile on Windows 8.1 displaying incorrect date for icloud calendar but date icon displays correct date on iPhone 5 and iPad Air

Calendar Tile on Windows 8.1 displaying incorrect date for icloud calendar but date icon displays correct date on iPhone 5 and iPad Air. Date on Windows 8.1 is correct. Thank you.

Try doing a reset on your phone. Sounds like your carrier's time set is not getting through to your device. If the reset doesn't do it, then go to Settings>General>Reset>Reset Network Settings. That should do it.

Camera icon displays instead of Trash-Can upon selecting a message in the conversation

iPhone 5
iOS 8
Camera icon displays instead of Trash-Can upon selecting a message in the conversation and clicking on 'Copy/Speak/More...'
After restart, now it shows Trash-Can again.

Many were saying that you just needed to turn your phone off and turn it back on after upgrading to ios8.1, so that you could then delete single messages.
It worked when I did it the first time, but today while sending text messages the trash can disappeared while I was trying to delete some messages.
Any help would be greatly appreciated.

E65 is freezing with voipcall icon displayed on th...

Hello, i have problem with the e65. Sometimes when i hang down or i use the sip vlient, my phone is freezing with the voipcall icon displayed on the top of the screen. I can't do anything and i must restrat the phone. I've got the last firmware and use the embedded sip nokia client.
Thanks

I am havving the same problem. iTunes said there was an "unexpected error" and the phone is hung on the same screen. I'm updating from a MAC. Restarted iTunes and no difference, it doesn't even see the phone as plugged in to the macbook. Reseting the phone takes me right back to the same USB cable/iTunes screen.

How to keep icons displayed on bottom of screen

one to keep icons displayed on bottom of screen to make switching between programs easier

You can only access the recent apps by double tapping the home button or by swiping up from the bottom of the screen if you enable multi-tasking gestures on your iPad. Go to Settings>General>Multitasking Gestures>On. If you enable that setting - you can also swipe across the screen to switch between running/open apps.

Where is the "Icon Display Period" attribute stored?

G'day All,
I have a procedure that needs to referenece the "Icon Display
Period" attribute for a particular content area (this is normally accessed via
the Content Area properties page). Try as I might, I cannot track down
the table/column that stores this little gem of a value:-( Anyone have
any ideas where this might be located?
Cheers
Kal.

G'day Sharmila,
Thanks for your quick response:-) Unfortunately neither WWV_THINGS nor WWV_CORNERS
seems to contain what I'm looking for (either that or I'm really missing something here).
My understanding is that WWV_CORNERS contains information about individual folders.
I use this table to get the UPDATEDATE and CREATEDATE attributes to which I want to
compare the difference between the current date and the "Icon Display Period".
WWV_THINGS seems to contain information about idividual items but I'm only really
interested in folders for the moment.
Now "Icon Display Period" seems to be a content area wide property. The default is 7 days.
I've looked at tables like WWSBR_ALL_CONTENT_AREAS and WWSBR_ALL_SITES
but they don't seem to hold very much information at all:-( Hmmm ... just looking at the Content
Area Properties page and there seems to be quite a lot of information there. Surely It must
be stored somewhere?
Anyone have any ideas?
Kal.

Problem with the icon "Display query on the web" in Query Designer

Hi Friends,
         I was told by my PM to give them all FI Modules standard business contenet reports, so for that reason i have installed all FI business content & loaded the data in the Dev Server, now i just want to show the reports, but i want excute these reports in Internet Explorer using the Icon "Display Query on the WEB" in query designer, when i click on that it isn't getting displayed in the browser.
         the URL coming like this, "http://itcchqbd:8100/sap/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&INFOCUBE=0FIAA_C11&QUERY=0FIAA_C11_Q0001&VARIABLE_SCREEN=X&DUMMY=1"
getting the message in the page, the page can't be displayed,
          How to solve this problem & how do i have to show the standard business content reports to all FI Superiors ?
awaiting for ur answers
Regards,
Balaji

Balaji,
first check if you have enabled web reporting on your BW server ( there is a how to paper for the same )
another way to check out the same is to find out if there are existing web templates being published which would make the server web ready.
As for FI content - activate the FI relevant areas in Business content and then activate the respective datasources and then load the data.. or go trough the best practices for BW-FI ( service.sap.com/bestpractices) wnd then activate the best practices for the same.
Hope it helps.
Arun
Assign points if useful

Icons display as dotted line box

My first post to the community. Please be gentle.
When I access my Documents or Downloads folder from the dock, the individual files are displayed as a dotted line box rather than the icon preview of the file. If I access the Documents or Downloads folder using Finder, the icons display as expected (miniature version of the picture, .pdf, document, etc). For the life of me, I can't figure out why this is or how to correct it.
Not a big issue, but it is really bugging me that I can't figure it out. Any help would be much appreciated.

Hi
Once you define the relation ship goto ppos_old and see the structure. After you got the structure of the org unit then click on the staff assignments and look for the position to which you have specified the relation. And go for the reporting structure under the main menu-> Goto-> Reporting structure then you can see the relation ship between the persons but you wont see it as a dotted line its normal line which you can see.
Regards,
Vijaya.

Weird icon display problem (9iAS Forms 9.0.4)

Let me start out with the fact that I have setup 6 or 7 systems displaying GIF's as icons in web forms (both Forms 6i and Forms 10g/9.0.4). So I know all about setting the registry.dat, virtual directory for the icons etc. I have setup the environment correctly (unless some fat finger typing has gotten in the way).
When I load a form in a web browser and I watch the status bar on the bottom of the broweser ( IE6 or IE7) I can see that it loads the GIF's (fortunately my server is just slow enought that I see the "loading .....xyz.gif" statements for my GIF icons.
What happens is that none of the icons display on the buttons. Of course when I run the form in the IDE the icons display as expected.
Has anyone run into this problem before and if what was the solution?
TIA,

1. The image files cannot be found or are not accessible. Just because you see something on the client that says "Loading..." does not necessarily mean it was found. Check the HTTP Server error_log. If you see HTTP 404 errors you have an access or virtual path problem.
Answer: No HTTP 404 Errors (no errors at all). FYI, Files are located in D:\icons (W2K server) and the Security is set to "Everyone" with Full Access/Control. The AS has "D:\icons" mapped to /icons and Registry.dat has the path set to /icons.
2. You are using an image format that isn't supported. For example, Forms supports GIF files, but not GIF files with transparent backgrounds. Also, Forms does not support most of the compression formats associated with GIF and JPG. Test with an image that you know will work. For example the OTN Logo on this page. Right click on the image and choose Save Picture As.... or:
http://www.oracle.com/admin/images/otn/otn_logo_small.gif
Actually, you should be able to simply put the entire URL above into the image filename field on the Property Palette for any Iconic button large enough to hold it.
I pretty sure this works in 10.1.2, not so sure about 904
Answer: You'll probably say this is not good enough, but the images work in the IDE, therefore I conclude that they should work on the AS (i.e. size and display type are correct/supported). I did not have a button that was big enough for the Oracle logo, hence I did not try it.
3. The image size is too large for the button.
Answer: see answer above.
4. References to images are case sensitive. It is recommended that your image files (in the file system) use all lower case letters, including the extension. The reference in the form should also be lower case.
Answer: all image names in the property pallet are lower case and the actual file names are lower case (as shown in Windows Explorer).
With regard to the other post about icon names ending a list of specific characters, some do and some don't, but ALL my icons are NOT displaying.
Lastly, these exact same icons have worked in the past (who does not reuse icons?).

Menu Icons Display Strange

All my disabled buttons appear like this where they are gray. What can I do to fix this or what would cause them not appearing correctly?
Thanks!

Here are my System Specs
Dell Latitude E6500
Windows XP Pro Service Pack 3. 32 bit
Intel Core 2 Duo 2.66 Ghz
NVIDIA Quadro NVS 160M
The buttons seem to work fine, they just look all grayed out when they can't be selected.
Thanks for your help.
Alan Wayman [email protected]
Date: Thu, 10 Sep 2009 14:58:40 -0600
From: [email protected]
To: [email protected]
Subject: Menu Icons Display Strange
Hi again
Hmmm, new install. Aside from the funky icons does it seem to function?
What is your operating system? Vista, Windows 7, Windows XP and how many bits? 32 or 64.
Note that Adobe has no version of Captivate that has been blessed and purported to run flawlessly on 64 bit systems. We are seeing more and more folks arrive here that are using 64 bit systems and citing all manner of issues. Mostly surrounding capture and audio.
Cheers... Rick
| http://www.robowizard.com/pc.gif | Helpful and Handy Links
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=5
http://www.ShowMeSolutions.biz
http://sorcererstone.wordpress.com/
http://www.gooberguides.com |
>

Icon Display Issue

I am having an issue where my icons display as if their contrast was too high. The background, dock, .jpgs and movies all display normally but all the icons look as if a white filter where in front of them.
What precipitated this problem was I ran an application that caused the contrast in Universal access to max out. I manually turned this down and everything else looks ok but the icons never went back to normal. It is only an issue on this account in my other accounts the icons display normally.
I have updated video drivers. I have restarted my machine. I have check all the display properties and they look ok (monitor is calibrated and is using millions of colors).
Is there some plist or set of preferences in a account that may control the display behavior of icons or items on the desktop? I am at a loss as to where I should proceed from here. Any help would be appreciated. Thanks
G5 Mac OS X (10.4.3) ATI X800 \ RAM 500 \ Apple Cinema 20"

Anyone even have a guess ... ? Just looking for some ideas.

Folder icon display at richfaces tree node

Hello All,
I would like to use richfaces tree structure.
But the issue with that is the folder icon display at each tree node.
For some reason i don't want the folder icon at the tree node.
Is there anyway to get rid of that?
I tried to change the image (iconFolder.gif) to some 1X1 pixel image in the richfaces jar file.
But when i added the new jar with new image for icon, that image is not loading.
I'm using Jboss4.2 as my application server.
Please help me to remove the folder display at tree node.
Thanks in advance.
Regards,
Elizabath

Hi,
I could see the icon attribute to specify the folder icon at the node. I placed a 1x1 pixel image as the iconfolder image. But that results in a blank pixel at the node. I wish to get rid of that.
Also i wanted to change the navigation images too. i would like to have the + and - sign images instead of arrows.
Any suggestions?

Can't see Bluetooth icon displayed on my iPhone 4

Can't see Bluetooth icon displayed on my iPhone 4 after I got it replaced..(new)

He Modular747,
Thanks for the reply. I tried clearing the recents and now can see the new calls being registered in the call log. Initially it was only showing me the calls until the 21st of June and not the later ones. Appreciate your answer.
Could you please tell me what is the maximum size for the call log, it will surely help me in clearing the same at the proper time.

Where is "Icon Display Period" stored?

G'day All,
I have a procedure that needs to referenece the "Icon Display Period" for a particular
content area (this is normally accessed via the Content Area properties page). Try as
I might, I cannot track down the table/column that stores this little gem of a value:-(
Anyone have any ideas where this might be located?
Cheers
Kal.

G'day Sharmila,
Thanks for your quick response:-) Unfortunately neither WWV_THINGS nor WWV_CORNERS
seems to contain what I'm looking for (either that or I'm really missing something here).
My understanding is that WWV_CORNERS contains information about individual folders.
I use this table to get the UPDATEDATE and CREATEDATE attributes to which I want to
compare the difference between the current date and the "Icon Display Period".
WWV_THINGS seems to contain information about idividual items but I'm only really
interested in folders for the moment.
Now "Icon Display Period" seems to be a content area wide property. The default is 7 days.
I've looked at tables like WWSBR_ALL_CONTENT_AREAS and WWSBR_ALL_SITES
but they don't seem to hold very much information at all:-( Hmmm ... just looking at the Content
Area Properties page and there seems to be quite a lot of information there. Surely It must
be stored somewhere?
Anyone have any ideas?
Kal.

Bbm already installed but no icon display

Hi,
I have an error encounter in BBM it's already installed but no icon display on my cellphone, please help what i need to do?
Thanks

Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB23968 BlackBerry Messenger icon disappears from the Home screen of the BlackBerry smartphone
Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the symtoms you are experiencing, should reveal all applicable existing threads to you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

No arraymanager icon displayed

Similar Messages

Maybe you are looking for