No article document could be found for cancellation" with Message no. VL622
Hi Experts
when I am Reverse the goods movement( for delivery cancel ) in VL09 I am getting error "No article document could be found for cancellation" with Message no. VL622.
I am unable to delete the delivery and the delivery is not allowing me to do GR also, while In warding (GR)
I am getting error "PL Stock in transit exceeded by 56 EA : 300387450 0611 10" Message no. M7022
even though PGI is finished for Delivery, stock is not reduced. It is still showing in supplying site only
Kindly help me out to delete the delivery or to do the GR.
Regards
sudha
Pls refer sap notes 331758
Similar Messages
-
No article document could be found for cancellation
Dear All
when I am Reverse the goods movement( for delivery cancel ) in VL09 I am getting error "No article document could be found for cancellation" with Message no. VL622.
I am unable to delete the delivery and the delivery is not allowing me to do GR also, while In warding (GR)
I am getting error "PL Stock in transit exceeded by 56 EA : 300387450 0611 10" Message no. M7022
even though PGI is finished for Delivery, stock is not reduced. It is still showing in supplying site only
Kindly help me out to delete the delivery or to do the GR.
Regards
sudha
Edited by: sudha on Sep 24, 2008 2:14 PMHi ,
Pls refer sap notes 331758 -
'Acc.dep. accnt.for ordinary depreciation' could not found for are 15
Hi Sap Gurus,
I am trying to Run Depreciation for the month of March 2010 with group asset.
I have created group asset and normal asset and in the normal asset, i have maintained group asset and for both assets i maintained values in AS92&as82.
But when i am running depreciation, i am getting the below Error.
Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 15
Message no. AU133
Diagnosis
When creating the accounting document, the system could not find account 'Acc.dep. accnt.for ordinary depreciation' in depreciation area 15 for company code GO01.
Procedure
Enter this account in the account determination for Asset Accounting.
Please tell me how resolve the above Issue.
Thanks&Regards,
DudeHi,
could you please check if the following threat is helpful:
Error AU133 Account 'Contra account: Acquisition value' could not be found
regards Bernhard -
No valid sequence could be found for the set of patches."adobe 10.1.1"
Tried to up grade when I was asked to a while ago and when I did nothing would work, so I uninstalled the old adobe reader and tried again and got the message " no valid sequence could be found for the set of patches" the download continues and says it has installed but it hasent. everything I use needs adobe reader for me to see statment's etc so I cant get any thing to work I tried removing everything I could belonging to adobe and tried to install again but this just keeps happening. im running on windows xp 32 bit its just a home computer.
Please can you help me.The following article while old fixed the issue for me. Registry editing is required so please backup your registry before making any changes.
http://support.microsoft.com/kb/913754
A reboot was required before reinstall of Reader succeeded. -
I have a workflow being deployed for the first time on a farm. When I create a project with an EPT connected to the workflow it runs and can enter the required field in a PDP. Then I Submit the workflow to go to the next stage and I get the "Unable
to open project, no valid Project Detail Page could be found for the project" error. After that the project is stuck on the same error. All of the 18 stages have PDP and Schedules assigned to them.
Any ideas on why the workflow cannot see the PDPs? Is there a farm permissions that I am missing? Thanks!Hi David,
It starts to be a bit technical for me, but here is what I found on the web (seems to be an authentication issue with Sharepoint 2010):
http://social.technet.microsoft.com/Forums/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the
http://social.msdn.microsoft.com/Forums/silverlight/en-US/5cc70ff6-50d9-4cd3-b092-12007f4e495b/response-message-contenttypebindingtype-mismatch
http://stackoverflow.com/questions/5263150/the-content-type-text-html-charset-utf-8-of-the-response-message-does-not-match
Hope it will help you going forward in resolving your issue.
Guillaume Rouyre - MBA, MCP, MCTS -
Cannot update. Get error message 1648, "no valid sequence could be found for the set of patches."
Uninstall the corrupt Reader version using http://labs.adobe.com/downloads/acrobatcleaner.html then download and install the latest Reader from http://get.adobe.com/reader/enterprise/
-
JSF1091: No mime type could be found for file xyz.png.
Hi all,
I get error logs in weblogic server like :
<ExternalContextImpl> <getMimeType> JSF1091: No mime type could be found for file xyz.png. To resolve this, add a mime-type mapping to the applications web.xml.
I get this for all the image files ... I found something :
http://www.java2s.com/Code/JavaAPI/javax.servlet.http/webxmlmimemapping.htm
<mime-mapping>
<extension>java</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
What should I add (mime-type) for png files ?
Thanks..You use 'image/png' for this. Refer to MIME Types - Complete List » HTML Elements| Learn HTML | Tags | Tutorials | HTML Cheat Sheet for more info.
Timo -
JSF1091: No mime type could be found for file image_name.png
Hi Experts,
JDEV 11.1.2
why this message shown in the log......? also how can i add a mime-type mapping ?
<ExternalContextImpl> <getMimeType> JSF1091: No mime type could be found for file image_name.png. To resolve this, add a mime-type mapping to the applications web.xml.
PMSEdit your app's web.xml and add it?
Google can find you examples like [url http://www.java2s.com/Code/JavaAPI/javax.servlet.http/webxmlmimemapping.htm]this -
Error 1706 No valid source could be found for adobe reader x
Error 1706 No valid source could be found for productAdobe reader X (10.1.4) Install cannot continue.
On programs that need adobe reader, the page will not come up.
I tried to restoring my system to a point before when adobe was working, and tried to reinstall adobe reader.
the download stops at 80% and reports: cannot find file AdbeRdr1010_en_us(1).msiRemove your current installed Reader using http://labs.adobe.com/downloads/acrobatcleaner.html
then download and run the full installer from http://get.adobe.com/reader/enterprise/ -
Error:Administration header could not found for support message
Hi All,
we are creating the support message in CRMD_ORDER transaction. we are getting an error, "Administration header could not found for support message" while saving. And also it is coming out of the transaction.
The transaction type is SLFN.
Please advise.
Regards
kumarDid you find the solution to this error? I am also getting this error and need to solve the same. Can you please help?
-
Log4j: Logging Errors(No appenders could be found for logger)
hi,
i used logging in my java application. i placed log4j.jar and log4j.xml file paths
given in classpath.
i am getting 2 warning Messages. Those are as follows
Log4j:WARN. No appenders could be found for logger (Myclass.class)
Log4j:WARN. Use Log4j System Properly.
Here is what i done
log4j.xml is external configuration file. I specified Appender and layout
information in this.
Here is log4j.xml content...
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
<log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/">
<appender name="appender" class="org.apache.log4j.FileAppender">
<param name="File" value="C:\LOG\log.txt"/>
<param name="Append" value="false"/>
<layout class="org.apache.log4j.SimpleLayout"/>
</appender>
<root>
<priority value ="INFO"/>
<appender-ref ref="appender"/>
</root>
</log4j:configuration>
I specified appender and layout in log4j.xml file and placed log4j.xml file in
classpath.
How can i solve this problem?. Please help me.Ok. I'm no log4j expert, but if you try to get a logger called Myclass.class and have not defined one in your xml file, there's a problem? Look at my xml file below, especially the category tag. Instead of putting "All" for the name, you would put "Myclass.class".
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
<log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/">
<appender name="file" class="org.apache.log4j.FileAppender">
<param name="File" value="log/log.txt"/>
<param name="Append" value="true"/>
<layout class="org.apache.log4j.PatternLayout">
<param name="ConversionPattern" value="%d %-5p [%t] %C{2} (%l) - %m\n"/>
</layout>
</appender>
<appender name="console" class="org.apache.log4j.ConsoleAppender">
<param name="Target" value="System.Out"/>
<layout class="org.apache.log4j.PatternLayout">
<param name="ConversionPattern" value="%d %-5p %C{1}.%M - %m\n"/>
</layout>
</appender>
<!-- The All category -->
<category name="All" additivity="false">
<priority value="debug"/>
<appender-ref ref="file"/>
<appender-ref ref="console"/>
</category>
<!-- The one and only root category -->
<root>
<priority value="warn"/>
<appender-ref ref="console"/>
</root>
</log4j:configuration> -
Getting error as : log4j : WARN No appenders could be found for logger
Hi all,
I am using IBM - Rational Application Developer (RAD) for the development of my project service task.
I am trying to use log4j to log various events like errors and warnings and so on ....
But I am getting following errors in console window of RAD :
{color:#ff0000}
[8/5/08 10:12:18:001 IST] 00000038 SystemErr R log4j:WARN No appenders could be found for logger (VINValidationService).
[8/5/08 10:12:18:001 IST] 00000038 SystemErr R log4j:WARN Please initialize the log4j system properly.{color}
If you have any clue regarding how to get out of this then it would be of great help to me .... please reply soon ....!
(Please note that I have tried all the ways of setting CLASSPATHS and BUILDPATHS in the RAD) .
--- Thanking you in advance ...
Akshay_L.You could read these to get some hints [http://www.google.co.uk/search?q=%22Please+initialize+the+log4j+system+properly.%22]
The first reply to the first hit on google says "log4j.properties needs to be on the classpath where log4j can find it.".
You can set the system property if you wish but the classpath approach is the easiest in my opinion. -
Log4j:WARN No appenders could be found for logger (Log4jExample).
Hi,
I am getting this error when I try to use log4j to generate logs.The program works fine if I keep log4j.properties file and my logging program in the same directory.
If it is different directory,how to make it work ? like below.
Any help in this regard is appreciated.
Thanks
Chat
C:\mjava\test > dir
Log4jExample.java
C:\mjava\test >java Log4jExample.java
log4j:WARN No appenders could be found for logger (Log4jExample).
log4j:WARN Please initialize the log4j system properly.
import org.apache.log4j.*;
public class Log4jExample
private static final Logger log =
Logger.getLogger(Log4jExample.class);
public static void main(String[] args)
try
log.debug("This is a debug message.");
int i = Integer.parseInt("Hello world");
catch (java.lang.Exception ex)
log.error("Caught an exception", ex);
C:\mjava>dir
log4j.propertiesI'd recommend you use the classpath. But don't put log4j.properties in the parent directory of where your java class is, or the classpath will end up being incorrect. Try putting it in a separate directory tree, or as a child directory of where your class lives.
Then add the classpath option to the runtime.
java -classpath .;otherDirectory Log4jExample
(where "otherDirectory" is the directory that contains log4j.properties) -
Log4j: WARN No appenders could be found for logger
Hi,
I defined a log4j.properties file in my class directory:
log4j.defaultInitOverride=false
log4j.rootLogger=DEBUG, R, S
log4j.appender.R=org.apache.log4j.RollingFileAppender
log4j.appender.R.File=R.log
log4j.appender.R.MaxFileSize=100KB
log4j.appender.R.MaxBackupIndex=0
log4j.appender.R.layout=org.apache.log4j.PatternLayout
log4j.appender.R.layout.ConversionPattern=%p %t %c - %m%n
log4j.appender.S=org.apache.log4j.RollingFileAppender
log4j.appender.S.File=S.log
log4j.appender.S.MaxFileSize=100KB
log4j.appender.S.MaxBackupIndex=0
log4j.appender.S.layout=org.apache.log4j.PatternLayout
log4j.appender.S.layout.ConversionPattern=%p %t %c - %m%n
Then I used the Logger in loginAction.java:
private Logger logger = Logger.getLogger("R");
logger.setAdditivity(false);
logger.info("LoginAction");
and in OracleDAOFactory.java:
private Logger logger = Logger.getLogger("S");
logger.setAdditivity(false);
logger.info("Connected to DB from customer DAO");
what I want to achieve is to record the information for loginAction in R.log and record the information for OracleDAOFactory in S.log. But do NOT add loginAction's information into OracleDAOFactory, and vice versa.
The above codes work properly if I remove the line "logger.setAdditivity(false);". However the result is both log files have the contents. But if I add the line "logger.setAdditivity(false);", I get the following error message:
log4j:WARN No appenders could be found for logger (S).
log4j:WARN Please initialize the log4j system properly.
What is wrong with my above coding?
Thanks for your help!I don't know if this applies to your situation, but I just resolved this problem in my own environment. It turns out, I was attempting to log something in an area of my code before the logger had been configured by calling the configure method of the PropertyConfigurator class and passing in the file name of the properties file as the argument. It's important to set up log4j before attempting to log to the output file, and I called a debug method before it was set up.
-
I have tried updating and/or repairing Adobe Acrobat X standard but receive the error message "no valid sequence could be found for the set of patches" I am using adobe acrobat x standard (10.1.3) running windows 7.The software came pre-installed and so I have the CD key but no CD. Thanks Nick
Hi Anoop.
I have tried the Help>Check for updates option and receive the same error message accompanied by error code 1648 (not sure if this helps). I have tried Help>Repair & Control Panel>Repair and receive the same "no valid sequence could be found for the set of patches".
Maybe you are looking for
-
"I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to
-
Oracle 8.1.5 to Oracle 9i
Can I transfer my "demo/demo" schema from 8.1.5 to 9i which is on a CD?, I've managed to transfer my "Scott/tiger" schema which was on floppy disk
-
Running total in group header doesn't display when it's at page bottom
Post Author: Charles Denight CA Forum: Formula Hi, Using v.9 of Crystal Reports I've created some running totals using a cross-tab workaround to get the running totals into the group headers, but when the group header falls at the bottom of the page
-
Hi all, I am using ODI 11g(11.1.1.3.0) and I am trying to make an interface using analytic functions in the column mapping, something like below. sum(salary) over (partition by .....) The problem is that when ODI saw sum it assumes this as an aggrega
-
Hello I am importing in DTW invoices from 1st of January until today. I have set all item as non stock item so tehre is no stock movements booked. Now my question is about cost price which field to use in B1 to have the margin calculation correct? My