No Assignment of Payroll Data to BW Month for Country Grouping 10 and 13

Hi Gurus,
I get the error "No Assignment of Payroll Data to BW Month for Country Grouping 10 and 13" when extracting data for 0PY_C02. I then added the "End Date of For Period" in the SBIW in the Payroll systen activity "Assignment of Payroll Data to BW Month". I am still getting the same error???
Also I do have data in the cube from that extraction, but when I run a query I get no data?? Is this due to the above error?
Thanks,
Garth

Hi,
The extractor runs without errors in RSA3 in the source system. The error is red with the test of "No Assignment of Payroll Data to BW Month for Country Grouping 10 and 13". I completed the SBIW task to set this in the source system but I still get the same error?
Any other ideas?
Thanks,
Garth

Similar Messages

'No assignment of payroll data to BW month for country grouping 99'

hi gurus,
i am getting the error 'No assignment of payroll data to BW month for country grouping 99'
to solve this i went to
SBIW>Settings for Application-Specific DataSources (PI)->Human Resources->Payroll Plug-In>Assignment of Payroll Data to BW Month
i am choosing country 99 and here i get 4 options which should i choose.
1.payment date of for- period
2.end date of in -period
3payment dare of for -period
4payment dare of in- period
regards
man

Hi,
As per the settings in the SBIW code in R/3 , we can go with a single Time based assignment for a Country at a time.So we can not use both IN Period and FOR period for the same country code.
For more information, refer the below path.
SBIW>Settings for Application-Specific DataSources (PI)->Human Resources->Payroll Plug-In>Assignment of Payroll Data to BW Month
Under human resources.....go to payroll and assignment of payroll data to BW
if you do not get...use Cntl + F and enter payroll..
you will get
in Assignment of payroll data to BW Month, after giving country grouping, what type of period assignment should be given. in R/3 dev side when i have chosen
1.End of For period, extracted 972 records
2. End of In period, extracted 1023 records
3. Payment date of For period, extracted 972 records(just the same as in the first option)
4.Payment date of In period, extracted 0 records
Do u know more about these options??? one more thing to clarify on this. While doing payroll data extraction, do we have consider or say give "Define time frame for transfer", if that is compulsory then i have done that by givigng
Earliest date as 01.01.2005
Latest date as 31.12.2005
but in the info package selection i have given to extract 01.01.2005 to 28.02.2006 and it has extracted successfully even 2006 records which means that though we define time frame, extraction is independent of this time frame, am i correct???
Hareesh

Assignment of Payroll Data to BW Month- 0HR_PY_1

We wish to extract data from R/3 payroll for both the IN Period and FOR period for the same country code.. Does anybody currently do this and what are the options available
thanks
Rodd

Hi,
As per the settings in the SBIW code in R/3 , we can go with a single Time based assignment for a Country at a time.So we can not use both IN Period and FOR period for the same country code.
For more information, refer the below path.
SBIW>Settings for Application-Specific DataSources (PI)->Human Resources->Payroll Plug-In>Assignment of Payroll Data to BW Month
With rgds,
Anil Kumar Sharma .P

Why does my Airport Express say "self assigned IP address"? No IP address for the ethernet, and it is not connecting to my cable router any longer...

Why does my Airport Express say "self assigned IP address"? No IP address for the ethernet, and it is not connecting to my cable router any longer...

Some cable providers.....like mine, a well known company......seem to take anywhere from a few moments to sometimes up to 30 minutes to allow their equipment back at the cable company to fully reset and issue a new fresh connection.
So, it would not hurt to leave things powered down for 15-20 minutes or more when you perform the reset that John Galt suggests.

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

Lightroom 5.7 will not update even through I pay the $9.99 per month for Photoshoto CC and lightroom ?

Lightroom 5.7 will not update even through I pay thr $9.99 per month for Photoshop CC and Lightroom ?

Hi Glenys,
Here's another forum thread that may help (related discussion), if you can't find the new version:
I have Creative Cloud for Photographers. How do I get Lightroom CC?

What is the difference between the plan i currently have now and the 9.99 a month for both photoshop and lightroom?

I currently am paying 29 dollars a month for just photoshop.. there is an option for 9.99 a month for both that and lightroom? what is the difference?

This document explains the differences between the Creative Cloud Photography Plan and the Photoshop single app plan - https://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html
Thanks
Bev

I pay $3.99 a month for 200gb storage and in my settings it says I have 166gb left, however I keep geting popup messages on my iphone5 that im out of storage and I cant take pictures etc, any suggestions?

I pay $3.99 a month for 200gb storage and in my settings it says I have 166gb left, however I keep geting popup messages on my iphone5 that im out of storage and I cant take pictures etc, any suggestions?

The money you are spending is for iCloud storage. The warning you are getting is in reference to storage on the iPhone. You cannot increase the storage on the iPhone except to delete content on the device. If you want to take more pictures, you need to remove some content from the device to create room on the iPhone.

SSRS Bar Chart grouping date series into Months, setting scaler start and end ranges

I've been trying to solve this issue for a few days now without writing a sql script to create a "blank" for all of missing data points so that I get a bar for each month. I have date series (by day) data points grouped by two items
that creates a set of bar charts. EG: one chart per product in the tablix detail grouped to site level.
My issue is I would like the start and end of the charts to be the same for all charts and the only way I get it to work is with a chart that continues to show each date on the chart.
EG:
I have the graph start and end points set and scaling by month as I would like but each bar is a day instead of aggregating to a month level. My issue I hope to find a workaround for is if I go to Category Groups and define the grouping
to group with a year and month function the series is no longer treated as date data and I cannot control scaling. It works fine if all months have activity, but I can't figure out how to always have all charts start at "May 2012" in this example.
The only start and end point that I've been able to get to work once doing this are integer based, eg normal start would be 1 for each graph, but 1 doesn't equate to the same month from chart to chart.
I hope SSRS can provide the solution. I do know I can write a query that creates a ZERO value for each month/product/site but I don't want to leave the client with a query like that to support.
-cybertosis

Hi cybertosis,
If I understand correctly, you want to display all month category label in the X-Axis. You have configure the Scalar Axis, however, it cannot display the requirement format.
In your case, if we want the specific data format, we can configure Number property to set the corresponding Category data format. Please refer to the following steps:
Right click the X-Axis, select Horizontal Axis Properties.
Click Number in the left pane. Click Date option in the Category dialog box.
Then, select Jan 2000 option.
Please refer to the following screenshot below:
If there are any misunderstanding, please feel free to let me know.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

7 dollar charge per month for 1 year and half

I hate to rain on everyones parade, because I know everyone is excited about the new iPhone and the new Droid, however I must. I was wondering why I've been getting charged 7 dollars by best buy for a year and a half or maybe even more. Every month 10th of month for at least a year and a half this charge has been showing up on my checking account. The only reason I can think this is the case is that I bought a new phone from them like 2 years ago and maybe the tech accidently gave me some sort of data plan I never asked for. However, I have not been using that phone for about 3 months now. Is there any way I can get rid of this payment so I don't have to pay 7 dollars a month for the rest of my life on a service I won't use because I have a new phone. Any help is appreciated. Thanks
Solved!
Go to Solution.

I don't so. I usually stay away from service plans and extended warranties, because once I bought a PS3 controller with the 2 year extended warranty and the joystick stopped working but they said that I must have caused this problem so they cannot replace it. I was like so what you're saying is that your extended warranty that is suppose replace broken equipment doesn't really cover anything and they said "it only covers normal wear and tear. Like if a button sticks of the joystick loses its cover". I was like that's fine and I bought it on another controller (stupidly idk why) and the button stick and was ok I should be fine and they will replace it. They said no we cannot replace it because you tampered with it I was like "NO KIDDING IT'S MY CONTROLLER!!!" After that I've avoided service and protection plans and that was like 2 years ago. Could it really still be from something like that? I'm just worried it's a hidden charge I didn't see on the old phones contract or some sort of data fee or something I cannot find. But thank you I will take a look at some receipts and records and see if I can find another protection plan I bought. Thanks

Personal Data and Address for Country Grouping 99 - error on ESS

Hello All,
I have configured personal data and address infotypes in ESS for the country grouping 99.
I have done the following config
1. Assign Screen Structure to Infotype Versions
2. Define Active Subtypes and Use Case
3. Define Country-Specific Applications
4. Created a Z service and then assigned this service to subarea.
I made use of US service and copied to z.
after the config when i log on to the portal and check the personal data or address links am getting the error:
An exception occurred that was not caught., error key: RFC_ERROR_SYSTEM_FAILURE
the st22 dump is
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED_NO
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
I searched in the forum but still am unable to figure it out where i am wrong or missing any config or any other technical error.
Can any one pls help me

http://wiki.sdn.sap.com/wiki/display/ERPHCM/HowtoReuseCountryspecificapplicationsforMolga99
check the steps in above link
and also please check with some standard country like india 40 or usa 10 what use cases and time constraints have been set
INFTY - Now specifies the infotype.
USECASE - Corresponds to the value in the table V_T7XSSPERSUBTYP.
ZEITB - Corresponds to the value in the table V_T591A (V_T582A).
Page 2
SUBTYPE_TAB - Here, you will find a list of the subtypes that have
already been checked and that are correct.
You then find the subtype in METADATA-SUBTY. However, you must move up
one subroutine in the call hierarchy in advance to do this.
This data makes it easy for you to identify the infotype and the subtype
and correct the inconsistency by making entries in the tables mentioned.
ie
T_cd:SE24 >>CL_HRPA_PERNR_INFTY_XSS >> CHECK_USECASE_WITH_CONSTRAINT >>
for
usecase = A1, A4, B1, B4 (table V_T7XSSPERSUBTYP)
you need to have
zeitb = '1' OR zeitb = '2' (table V_T591A)
for
usecase = A2, A3, A5, B2, B3, B5
you need to have
zeitb = '2'
for
usecase = A6, B3
you need to have
Zeitb = '3'

Two renewal orders and charges showing every month for one account and same renewal package, WHY

Why am I charged twice with two different orders every month for one package of 800 mins. Are they giving me 1600 minutes! I need only 800 minutes please, so please refund these extra order charges please. I just noticed this thing month today and on checking order history find that same practice has been followed for all my previous months transcations!

Hello and welcome to the Skype Community.
The duplicate charge has been reversed and the funds will be returned to you.

Data import from ECC to MDG via MDMGX tool for CC group and CC hierarchy

Hello,
We currently in process of importing data from ECC to MDG (co-deployed).
The MDMGX guide we follow mention about Accout (ACCA), Cost Center(CCTR) and Profit Center (PCTR).
While doing DIF, it shows above 3 domains but didnt mention about how cost center group(CCTRG), Cost center hierarchy (CCTRH) and same with profit center group (PCTRG) and profit center hierarchy (PCTRH) will be imported to MDG?
is there seperate process to bring hierarchy data from ECC to MDG?
Thnx in advance
Sahil

Hello Sahil
With MDMGX you can load individual master data but for group and hierarchies, you have to use the old procedure. If you ask me, then the MDMGX takes longer time rather that downloading the data in file from tables directly and upload it in MDG.
Go through this document and load the hierarchy and group data.
How to upload Finance data in MDG - Hub
Kiran

How to get min date of every month for six months?

Hi, i have data like this.
Process_date SEQ_No
16-MAR-13     733
09-MAR-13     732
02-MAR-13     731
24-FEB-13     730
16-FEB-13     728
09-FEB-13     727
02-FEB-13     726
26-JAN-13     725
21-JAN-13     724
12-JAN-13     723
05-JAN-13     722
29-DEC-12     721
24-DEC-12     720
15-DEC-12     719
08-DEC-12     718
03-DEC-12     717
22-NOV-12     716
17-NOV-12     715
10-NOV-12     714
03-NOV-12     713
29-OCT-12     712
23-OCT-12     711
13-OCT-12     710
05-OCT-12     709
28-SEP-12     708
22-SEP-12     707
15-SEP-12     706
08-SEP-12     705
01-SEP-12     704
everymonth admin will refresh actual data table and automatically this above table will update with unique seq_no and process_date.
I need to extarct min date of everymonth(First refresh of last 6 months - excluding currrent month) and also seq_no related to that month so using joins(using seq_no - that is available in main table) i can combine actual data.
I need result like:
02-MAR-13     731 ( I don't need MAR as it should not take current month data)
so i need final result like below:
02-FEB-13     726
05-JAN-13     722
08-DEC-12     718
03-NOV-12     713
05-OCT-12     709
01-SEP-12     704

995263 wrote:
Hi, i have data like this.
Process_date SEQ_No
16-MAR-13     733
09-MAR-13     732
02-MAR-13     731
24-FEB-13     730
16-FEB-13     728
09-FEB-13     727
02-FEB-13     726
26-JAN-13     725
21-JAN-13     724
12-JAN-13     723
05-JAN-13     722
29-DEC-12     721
24-DEC-12     720
15-DEC-12     719
08-DEC-12     718
03-DEC-12     717
22-NOV-12     716
17-NOV-12     715
10-NOV-12     714
03-NOV-12     713
29-OCT-12     712
23-OCT-12     711
13-OCT-12     710
05-OCT-12     709
28-SEP-12     708
22-SEP-12     707
15-SEP-12     706
08-SEP-12     705
01-SEP-12     704
everymonth admin will refresh actual data table and automatically this above table will update with unique seq_no and process_date.
I need to extarct min date of everymonth(First refresh of last 6 months - excluding currrent month) and also seq_no related to that month so using joins(using seq_no - that is available in main table) i can combine actual data.
I need result like:
02-MAR-13     731 ( I don't need MAR as it should not take current month data)
so i need final result like below:
02-FEB-13     726
05-JAN-13     722
*08-DEC-12     718 (why??? if we have 03-DEC-12     717)*
03-NOV-12     713
05-OCT-12     709
01-SEP-12     704i think you want something like this:
WITH T(d,s) AS
select to_date('16-MAR-13','dd-MON-yy'),733 from dual union all
select to_date('09-MAR-13','dd-MON-yy'),732 from dual union all
select to_date('02-MAR-13','dd-MON-yy'),731 from dual union all
select to_date('24-FEB-13','dd-MON-yy'),730 from dual union all
select to_date('16-FEB-13','dd-MON-yy'),728 from dual union all
select to_date('09-FEB-13','dd-MON-yy'),727 from dual union all
select to_date('02-FEB-13','dd-MON-yy'),726 from dual union all
select to_date('26-JAN-13','dd-MON-yy'),725 from dual union all
select to_date('21-JAN-13','dd-MON-yy'),724 from dual union all
select to_date('12-JAN-13','dd-MON-yy'),723 from dual union all
select to_date('05-JAN-13','dd-MON-yy'),722 from dual union all
select to_date('29-DEC-12','dd-MON-yy'),721 from dual union all
select to_date('24-DEC-12','dd-MON-yy'),720 from dual union all
select to_date('15-DEC-12','dd-MON-yy'),719 from dual union all
select to_date('08-DEC-12','dd-MON-yy'),718 from dual union all
select to_date('03-DEC-12','dd-MON-yy'),717 from dual union all
select to_date('22-NOV-12','dd-MON-yy'),716 from dual union all
select to_date('17-NOV-12','dd-MON-yy'),715 from dual union all
select to_date('10-NOV-12','dd-MON-yy'),714 from dual union all
select to_date('03-NOV-12','dd-MON-yy'),713 from dual union all
select to_date('29-OCT-12','dd-MON-yy'),712 from dual union all
select to_date('23-OCT-12','dd-MON-yy'),711 from dual union all
select to_date('13-OCT-12','dd-MON-yy'),710 from dual union all
select to_date('05-OCT-12','dd-MON-yy'),709 from dual union all
select to_date('28-SEP-12','dd-MON-yy'),708 from dual union all
select to_date('22-SEP-12','dd-MON-yy'),707 from dual union all
select to_date('15-SEP-12','dd-MON-yy'),706 from dual union all
select to_date('08-SEP-12','dd-MON-yy'),705 from dual union all
select to_date('01-SEP-12','dd-MON-yy'),704 from dual
SELECT MIN(D),
       MIN(S) KEEP(DENSE_RANK FIRST ORDER BY D)
FROM (SELECT D,
               S,
               TO_CHAR(D, 'mm') M,
               TO_CHAR(D, 'yy') Y,
               DENSE_RANK() OVER(ORDER BY TO_CHAR(D, 'yy') || TO_CHAR(D, 'mm') DESC) RN
          FROM T)
WHERE RN BETWEEN 2 AND 7
GROUP BY M, Y
ORDER BY 1 DESC

Block payroll data from cost center for all users except HR team

Hello Expect,
Could any body please advise me how can I restrict some HR data in cost center view from FICO,CRM,SRM and other team,
Now when other team see cost centers it display all data booked there but my client want to restrict some HR data from them
In my project there are 151 roles that can display cost center dat including HR data,
Now my requirment is how can I restrict only HR data belongs to a cost center
I mean to say they should be able to see all cost center data exept a cost center containing HR data.
Please advise how to get solution
Thanks and Regards

Hi,
in T.code PFCG do to the role of the appropriate usr to whom u want restrict cost center.
Hope this helps.
Reagrds
S.Ravi

No Assignment of Payroll Data to BW Month for Country Grouping 10 and 13

Similar Messages

Maybe you are looking for