No ATA device present?

I have a macbook 2007 with a disc drive issue. I can put a cd or dvd in the drive, and it accepts it and spins it, but nothing is coming up on the desktop. And i cannot eject the disc either with the eject button or the manual ways i've read about (holding down the trackpad button during startup, the credit card method, etc.)
I've restarted several time and I've attempted reseeting the power management. no change.
I should also state that this is a drive that i have recently installed. the old one was bunk, and I have replaced it with another used one. However, it was working properly when I installed it. I have since having this current issue, gone back in a made sure everything is connected properly.
Under the system profile it shows under ATA that no ATA device is present, and a similar message is showing under disc burning.
is there any hope for this one, or do I need to blow more money on this thing?

Wolczk, it was taken from a little bit newer model supposidly. The mackbook has a Serial-ATA hard drive. The optical drive shows up under hardware>ATA.
thraex, I woudn't be surprised. However, i have taken it apart for the third time and removed the drive and reinstalled it, and now it seems to be working. So i guess I didn't have it plugged in all the way or something. No clue.
thanks for the responses.

Similar Messages

Error while scanning for Serial-ATA devices.

There was an error while scanning for Serial-ATA devices. I'm not sure how to trouble shoot this. I believe a secondary drive in bay 2 died.

I also have just began to hit this issue.
I have 4 2T enterprise class WD drives in a raid 1+0 (or was it 0+1) config.
Device Model: WDC WD2002FYPS-01U1B1
One disk (disk0 in bay 2) keeps disappearing. Completely. /dev/disk0 and /dev/rdisk0 vanish.
If I look at "about this mac" / "More Info" / "Serial-ATA" I get the "error while scanning ...".
If I reboot, the offending disc comes back and the raid volumes start rebuilding.
The SMART status is (reported to be) fine.
I use the 'smartmon' tools and look at the extended SMART status and the values of the counters all looks the same as the other drives. I can run an extended offline test, which takes forever to execute. disk 1 and 3 eventually finish with success (it writes this status into a SMART log area on the disc).
Disk 2 and 0 take longer. I image this is because 2 is being read to resilver 0. Currently, I am running with disk0 absent again, and disk 2s test did not complete. It claims it was aborted by the host, so I imagine the one on disk0 will claim the same after I reboot.
My system is under extended AppleCare until 16 Jan 2011, so if I can determine that this is a disc controller error, I can get it fixed. The drives have a 5 year warrantee, and are less than 1yr old, so they are covered. I just need to figure out what the issue is.
I will now reboot and recover disk0 and see if perhaps there is anything recorded in the SMART log.
There is nothing in kernel.log specific to disk0. I include the log extract here for posterity. The "speed" volume is not raid 0+1, just striped, which is why it gets aborted.
Dec 21 23:30:26 8way kernel[0]: AppleRAID::restartSet - restarting set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 21 23:30:26 8way kernel[0]: AppleRAIDMirrorSet::rebuild complete for set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 22 04:17:22 8way kernel[0]: AppleRAID::restartSet - restarting set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 04:17:22 8way kernel[0]: AppleRAIDMirrorSet::rebuild complete for set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 05:23:16 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:23:30 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:23:44: --- last message repeated 1 time ---
Dec 22 05:23:44 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:24:14: --- last message repeated 4 times ---
Dec 22 05:24:19 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:24:56: --- last message repeated 2 times ---
Dec 22 05:24:56 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:25:17: --- last message repeated 1 time ---
Dec 22 05:25:17 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:25:31: --- last message repeated 1 time ---
Dec 22 05:25:31 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on EB932B0E-8476-480C-BBD4-53A9A77D9FEF
Dec 22 05:25:45: --- last message repeated 1 time ---
Dec 22 05:25:45 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:26:15: --- last message repeated 2 times ---
Dec 22 05:26:21 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:26:51: --- last message repeated 4 times ---
Dec 22 05:27:12 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:27:33: --- last message repeated 1 time ---
Dec 22 05:27:26 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:27:40: --- last message repeated 1 time ---
Dec 22 05:27:40 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:28:24: --- last message repeated 1 time ---
Dec 22 05:28:24 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:28:39: --- last message repeated 1 time ---
Dec 22 05:28:39 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:29:14 8way kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002ca detected for set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76), member 3C6E9EA4-831A-4
57A-8CA5-6E7E9CBEED25, set byte offset = 222462894080.
Dec 22 05:29:14 8way kernel[0]: AppleRAID::recover() member 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25 from set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76) has been marked
offline.
Dec 22 05:29:14 8way kernel[0]: AppleRAID::restartSet - restarting set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 05:32:38 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:33:22: --- last message repeated 1 time ---
Dec 22 05:33:22 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:34:06: --- last message repeated 1 time ---
Dec 22 05:34:06 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:34:53: --- last message repeated 1 time ---
Dec 22 05:34:53 8way kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002ca detected for set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D), member 9722C38E-DFF9-4
68F-8DE5-809432493168, set byte offset = 35194773504.
Dec 22 05:34:53 8way kernel[0]: AppleRAID::recover() member 9722C38E-DFF9-468F-8DE5-809432493168 from set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D) has been marked
offline.
Dec 22 05:34:53 8way kernel[0]: AppleRAID::restartSet - restarting set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 22 05:37:24 8way kernel[0]: AppleAHCIDiskQueueManager::setPowerState(0x13d64500, 2 -> 1) timed out after 100113 ms
Dec 22 05:37:44 8way kernel[0]: Failed to issue COM RESET successfully after 3 attempts. Failing...
Dec 22 05:37:44 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002be on EB932B0E-8476-480C-BBD4-53A9A77D9FEF
Dec 22 05:37:44 8way kernel[0]: AppleRAID::recover() member EB932B0E-8476-480C-BBD4-53A9A77D9FEF from set "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BBE0) has been marked
offline.
Dec 22 05:37:44 8way kernel[0]: AppleRAID::restartSet - restarting set "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BBE0).
Dec 22 05:37:44 8way kernel[0]: disk4: media is not present.
Dec 22 05:37:59 8way kernel[0]: speed::terminate(kIOServiceSynchronous) timeout
Dec 22 05:37:59 8way kernel[0]: AppleRAID::completeRAIDRequest - underrun detected, expected = 0xa000, actual = 0x9e00, set = "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BB
E0)
Dec 22 05:37:59 8way kernel[0]: disk4: data underrun.
Dec 22 05:37:59 8way kernel[0]: jnl: disk4: dojnlio: strategy err 0x5
Dec 22 05:37:59 8way kernel[0]: jnl: disk4: end_transaction: only wrote 0 of 40960 bytes to the journal!
Dec 22 05:37:59 8way kernel[0]: disk4: media is not present.
Dec 22 05:38:00 8way kernel[0]: jnl: disk4: close: journal 0x13f34e04, is invalid. aborting outstanding transactions

Satellite C655-S5044 won't recognize TSST CDDVDW TS-L633C ATA device after windows 7 update

Laptop: Toshiba Satellite C655-S5044; Windows 7 64-bit
DVD Drive - TSST CDDVDW TS-L633C ATA Device
After an automatic Windows update, the CD/DVD drive is no longer recognized.
Running troubleshoot on the PC yields:
Problem detected with TSST CDDVDW TS-L633C ATA Device Driver has been disabled
Checking for new drivers says I have the latest.
I tried running a microsoft fixit for DVD/CD drives - no problem found
I tried deinstalling the driver, then rebooting. This yields a message:
Device Driver was not successfully installed please consult with your device manufacturer.
I tried the TSST website for Toshiba and that rerouted me here.
Searching the forums I have seen similar issues with other hardware/OS combinations but not exactly the same.
Additional Info from the device manager:
Device Type: DVD/CD-ROM Drive
Manufacturer: (Standard CD-ROM drives)
Location: Location 0 (Channel 1, target 0, Lun 0)
I suspect that I have multiple device drivers on the computer for this device and the OS is installing one that doesn't work.
How can I get the correct current driver and install it?
Does anyone recognize this problem and have a fix?
Thanks.

Satellite C655-S5044
I didn't find that model anywhere.
Device Driver was not successfully installed please consult with your device manufacturer.
The driver is native to Windows. Sounds to me like a hardware malfunction.
After an automatic Windows update,..
In a Microsoft forum, they would tell you to do a System Restore to before the Windows Update. If that fixed the problem, then apply the updates one at a time to identify the culprit.
-Jerry

Windows 7 (64 bit) driver for the matshita bd-cmb uj-120 ata device for my hp pavillion dv6478

I recently upgrade my OS from Vista 64 bit to Windows 7 64 bit and the driver for my DVD player has a yellow question mark on it and I need to know if there is a driver for matshita bd-cmb uj-120 ata device for windows 7 64 bit

Hi,
Hope this helps:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Is there now a system call to send pass-through commands to ATA devices?

I want to send pass-through ATA commands to SATA/ATA devices on intel-based solaris. From the beginning the USCSICMD ioctl has worked just fine on SCSI/SAS/FC targets on intel & sparc-based solaris, but the mechanism to send pass-through commands to ATA devices has always been undocumented, closed, unavailable, whatever.
Is there now a way to do this w/o writing a custom device driver? Does anybody have an example chunk of code that does something simple like send the ATA IDENTIFY command to a disk drive? I know I can use SATL to encapsulate commands to SATA disks using certain SAS controllers, but I really need a way that will work with devices that are plugged into a standard SATA port on a motherboard.
Thanks

Hi Dhalek,
Just tried out a small example and it works ok in SQL Dev 4
drop table t1;
create table t1 (col1 int);
insert into t1 values (1);
insert into t1 values (2);
insert into t1 values (3);
select * from t1;
/*sqldev:stmt*/BEGIN;
DELETE FROM t1;
SELECT * FROM t1;
/*sqldev:stmt*/ROLLBACK;
SELECT * FROM t1;
---- RESULT ----
table T1 dropped.
table T1 created.
1 rows inserted.
1 rows inserted.
1 rows inserted.
col1
1
2
3
/*sqldev:stmt*/BEGIN
3 rows deleted.
col1
/*sqldev:stmt*/ROLLBACK
col1
1
2
3
Regards,
Dermot
SQL Developer Team

Opticarc BD ROM BC-5500S ATA Device Help

I have a laptop with an Opticarc BD ROM bc-5500s ata device. The problem is the drive fails to recognizes inserted disks with data. I've contacted HP and they provided the following trouble shooting solutions.
1.      Power drain.
2.      Check for the drive in the BIOS.
3.      Reseat the optical drive.
4.      Check for the presence of the optical drive in Device Manager.
5.      Uninstall and reinstall drivers in Device Manager.
6.      Delete upper and lower filters from the windows registry
The drive recognizes that a disk has been inserted but it recognizes the disk as blank even when there is data on the disk. (It tries to format the disk as a new disk.)
The trouble shooting solutions provided have not rectified the problem. The only way to get the drive to recognize a disk is to delete the driver in the Device Manager, Scan for New Hardware and Reinstall; sometimes with a reboot and sometimes not. I guess this is okay as a work around solution but it is a pain to delete and reinstall the drive every time I want to use it.
If anyone has a more permanent fix, the help would be greatly appreciated as this is extremely frustrating considering it's a relatively new system.

Im also still waiting for a firmware update for this device. My Dv7 wont play any blu-ray since may 09 and I was quite shure that a software update would sort this thing out. In September my laptop's warranty expired and HP says they cant help me anymore.
I notice that there are lots of people out there having the same issues with this hardware. Just for the record, my symptoms are I put in a Blu-ray disc and the drive spins up and down repeatedly like it's trying to read, but nothing ever happens on the screen. The OS never realizes there is a BD in the drive.
It used to play some blu-rays but one day just stopped working. When I go into my computer to view the drives, and have a blu ray disk in (tried this with 4 blu rays) it thinks there is no disk at all in the drive. I've tried updating firmware, updating quickplay, downloading powerdvd 9, checked drivers in device manager and pretty much anything else I can think of. So now Im at the point where I think the drive might be bad but dont really want to fork out the money for a new one if I dont really have to.

What is an ATA device

What is an ATA device I really need to know can you help me

It is a term related to the type of disk drive interface. For a MacBook Pro, however, you need a SATA (Serial ATA) notebook drive. You can find them at OWC.

Sony dvd-rw dru-820a ata device on Windows 8

sao paulo, (Brazil), January 26, 2013.
Hi ! I´ve just converted my computer to Windows 8 and the Drive SONY DVD RW DRU-820A ATA DEVICE is not OPERATING any more ! Would you pleas help ? We need the computer for working purposes. Thanks,
jose gonçalves brazuna
phone: (55-11-3285-4625)
e-mail: [email protected] or [email protected]

Hello Jose,
Welcome to the Sony Community.
You can contact Sony Storage support team by e-mail at [email protected] for assistance
If my post answers your question, please mark it as an "Accepted Solution."
Thank you for your post.

T61: Windows needs to install driver software for your ATA Device-help!!

Every once in a while after I turn on my laptop I get this message: "Windows needs to install driver software for your ATA Device." WTF? REALLY W-T-F? I am not computer illiterate When I reinstall the driver (from the site) it works. Then I turn on the computer and get the same message. PLEASE HELP... W-T-F?????????
The DVD player has been out of commission all of May so far. I can't stand this. What is happening?
I can't even download the driver from Lenovo.
PLEASE HELP.
Thanks in advance.
You are a God if you can't help me fix this.
Moderator note: Type added to subject line for clarity. The title of a thread should accurately reflect the subject of the discussion and be as technically specific as possible as stated in the forum rules.
Message Edited by Agotthelf on 30-05-2009 08:21 AM

Welcome to the forum!
Since I'm not quite certain that God frequents this forum, would you please tell us the model number and operating system of your ThinkPad and we'll take it from there...
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Re: does not contain ATA device

The computer does not contain ATA device

I am having problems burning a music cd on my MacBook Pro 5. While it says "this system does not contain any ATA devices", when I click on "Disc Burning", the following info comes up:
HL-DT-ST DVDRW GS23N:
Firmware Revision:          SB00
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          Insert media and refresh to show available burn speeds
So... can I burn a cd or not? When I follow the "Help" instructions, there is no "Burn" button. This is the 1st time I have tried to burn a cd on this machine.
Thanks for any help.
Pat

Device status code 10 on my Slimtype DVD A DS8AZH ATA Device With Windows 7

I have been having a problem with the Base System device. After reading up on it, I installed the Ricoh 5-1 Card Reader Driver. Now I am getting the Slimtype DVD A DS8AZH ATA Device. Code 10. How can I fix that?
I have a Pavilion dv6000 and the driver cannot be updated and it worked not 10 minutes before I installed the card reader.

Hi:
See if running the microsoft fix it tool will help.
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
If that doesn't work then try the manual fix...
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756(http://support.microsoft.com/kb/322756/ )How to back up and restore the registry in Windows
This problem is caused by two Windows registry entries that have become corrupted. To fix the problem, you have to use Registry Editor to delete the corrupted Registry entries. To use this method, you must be logged on to Windows as an administrator.
Windows 7 or Windows Vista
Click Start, and then click All Programs.
Click Accessories, and then click Run.
Type regedit, and then click OK.If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
In the navigation pane, locate and then click the following registry subkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
In the right pane, click UpperFilters.
Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only. If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to step 8.
On the Edit menu, click Delete.
When you are prompted to confirm the deletion, click Yes.
In the right pane, click LowerFilters. On the Edit menu, click Delete.
Note If you do not see the LowerFilters registry entry, unfortunately this content cannot help you any further. When you are prompted to confirm the deletion, click Yes.
Exit Registry Editor.
Restart the computer.

Slimtype DVD A DS8A1H ATA Device is recognized as CD Drive

About a week or two ago,my DVD drive , a Slimtype DVD A DS8A1H ATA Device, began to display itself as a CD Drive even though it is a DVD Drive. I have already tried the sfc/scannow command, uninstalling the driver and reinstalling it, removing the higher and lower filters in the registry editor, and I still have the same problem. I have checked the HP Support and Drivers website for any updates, but i have found none. Are there any solutions to this problem? Or ,at the least, may I get a website that has an updated driver for my DVD Drive?
Thank You in advance

There is no separate driver apart from the driver built into Windows....does the drive function correctly and the only problem is the identification in device manager? What happens if you put in say a Movie DVD or a DVD-RW disk blank?

How do I scan and detect the NI PCI devices present in the system like 4060 DMM and PCI 6511 etc?

Hi there,
I would like to scan the devices present in the system every time when the software starts.
This will help me to prompt user if a particular device is not present or is bearing a different device number than the one used in the software.
For this system I'm using PCI4060, PCI 6511 and DIO96. I am using LV7.0 and Win 2K & XP.
Thanks in advance for your help.
_Deepu

Hi,
you can make a scan of all the Daq devices by using the function: Get DAQ Device Information.vi that you find under the: Traditional Daq - calibration configuration palette.
See BD image attached. It scans for 16 devices and return a list of the found.
This seems to work only for Traditional Daq-compatible devices, no problem for PCI 6511 and DIO96.
I don't know if it works for the multimeter also; if not, you can make a basic call to the device at the beginning of the program and check for errors.
Alberto
Attachments:
devices.jpg ‏8 KB

KP "ATA Device recovery failed"

I am experiencing very disturbing behavior of my Mac since upgrading to Leopard: *clean new install* on a new SATA HD using *Sonnet Tempo SATA Adapter*. Repairing the permissions was not helpful.
Any help is more than welcome, I want my stable and solid Mac back!
*1) Sometimes my Mac freezes during the startup:*
a) grey screen with no spinning, I have to restart
b) a couple of times the Apple logo is not shown correctly (pixel soup) with sporadic freezing
*2) Sporadic KP during startup:*
Fri Nov 9 18:08:07 2007
panic(cpu 1 caller 0x3C0E56B4): "ATA Device recovery failed\n"@/SourceCache/IOATABlockStorage/IOATABlockStorage-200.1.8/IOATABlockSt orageDriverV2.cpp:2325
Latest stack backtrace for cpu 1:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x3C0E56B4 0x3C0E58D4 0x36D8B0E8 0x3BD59B5C 0x3BD5E1E4
0x3BD5C648 0x3BD62AB0 0x3BD62A14 0x003566B8 0x3BD629A0 0x3BD3AC64 0x3C0E5624 0x3C0E5748
0x3C0E58D4 0x36D8B0E8 0x3BD5DE8C 0x3BD5DAF8 0x36D960B0 0x0003F8D8 0x000AFE54
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOATABlockStorage(2.0.0)@0x3c0e2000->0x3c0f4fff
dependency: com.apple.iokit.IOStorageFamily(1.5.2)@0x3c085000
dependency: com.apple.iokit.IOATAFamily(1.7.3f1)@0x36d88000
com.firmtek.driver.FTATASil3112(5.1.3)@0x3bd57000->0x3bd69fff
dependency: com.firmtek.driver.Sil3112DeviceNub(5.1.3)@0x3bd39000
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x35614000
dependency: com.apple.iokit.IOATAFamily(1.7.3f1)@0x36d88000
com.firmtek.driver.Sil3112DeviceNub(5.1.3)@0x3bd39000->0x3bd3cfff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x35614000
dependency: com.apple.iokit.IOATAFamily(1.7.3f1)@0x36d88000
com.apple.iokit.IOATAFamily(1.7.3f1)@0x36d88000->0x36d99fff
Proceeding back via exception chain:
Exception state (sv=0xc58000)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
Message was edited by: MacOne

I'm finding this error happening on my 12" PowerBook G4. It started happening just a day or so ago and the machine has been running Leopard since Sunday.
I've run the ADT program and that has found no issues with the machine (ran the long and short test) so far.
The machine was an Erase/Install and a Migration Assistant from a SuperDuper Image to restore apps and accounts. My other machine is the PMac G5 and it has had no issues like this so far (fingers crossed).
I'm taking the PB back to Tiger to see if the issue is OS related or not. If it's HW - I would expect it will show it's head again.
Apple is advertising a sale tomorrow for Black Friday - maybe it's time to upgrade to a MBPro...
My KP is pasted below in case the fact that my PB is suffering the same issue and my KP data helps.
Thu Nov 22 16:52:39 2007
panic(cpu 0 caller 0x010606B4): "ATA Device recovery failed\n"@/SourceCache/IOATABlockStorage/IOATABlockStorage-200.1.8/IOATABlockSt orageDriverV2.cpp:2325
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x010606B4 0x010608D4 0x0098F0E8 0x0098F81C 0x00992CF8
0x009A0170 0x009A10DC 0x00992AF0 0x00992774 0x00992704 0x003566C0 0x009926AC 0x009994C0
0x0098DBAC 0x01060624 0x01060748 0x010608D4 0x0098F0E8 0x0098F81C 0x00992CF8 0x009A0170
0x00992F20 0x009991D8 0x009A01A0 0x00992E24 0x0099A0B0 0x0003F8D8 0x000AFE54
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOATABlockStorage(2.0.0)@0x105d000->0x106ffff
dependency: com.apple.iokit.IOATAFamily(1.7.3f1)@0x98c000
dependency: com.apple.iokit.IOStorageFamily(1.5.2)@0x832000
com.apple.driver.AppleKauaiATA(1.2.1f4)@0x99e000->0x9a2fff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x7a5000
dependency: com.apple.iokit.IOATAFamily(1.7.3f1)@0x98c000
com.apple.iokit.IOATAFamily(1.7.3f1)@0x98c000->0x99dfff
Proceeding back via exception chain:
Exception state (sv=0x2a7efc80)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9B18
Kernel version:
Darwin Kernel Version 9.1.0: Wed Oct 31 17:48:21 PDT 2007; root:xnu-1228.0.2~1/RELEASE_PPC

Pc freezes after setting on chip ata device to raid mode

Hi, I have an msi x58a-gd65 MB. I built this pc myself, but have a limited knowledge when it comes to figuring out problems. I have windows 7 installed and everything works on a single hdd. I now however want to set up a raid 1 hdd config. the MB supports raid 0/1/5/10.
So I followed the instructions msi provides in a youtube video, but when the pc restarts it freezes. I cant even access the bios so I have to clear the cmos.
The sequence I follow is as follows (I have tried the following with 2 same size hdd's attached and not attached (customer service told me to try setting it to raid with no hdd attached))
1)enter bios
2)check the boot sequence (hdd's are detected, when attached)
3)enter on-chip ATA Devices
4)Set raid mode to raid
5)save and exit
at this point, the pc restarts and after the msi logo appears, it freezes.
I had two internal pci cards attached, a usb 3.0 and an ide connector.
I have tried setting the MB to raid with the pci cards attached and not attached, same problem exists.
I have the latest version of bios installed, I downloaded from live update.
I was able to enter the raid utility before when I had considered a raid option but I didnt proceed with it. I had an older version of bios at that time.
I would appreciate any help please.

Quote from: xmad on 26-February-13, 01:56:13
Attached is version M46(Beta)
They apparently had some troubles with the version of the raid rom on the full release and this version has version 8.5.0.1030
>>Use the MSI HQ Forum USB flasher<<
Option 2 and point it directly at the bios file then to your fat32 formatted usb stick.
When the tool is complete, boot to the usb and follow the directions.
Let me know how it goes.
Thanks
Ok, here's what has happened so far,
I have put the new bios,m46,on a USB. When I enter the bios, I can save the old bios on the USB and I can also boot the new bios,m46,but when I try to update the bios,I can't find the bios file.
When I just boot the m46 bios I do get the raid utility option so that part seems to be sorted, now I just need to find a way to update the bios.
Thanks for your help so far Xmad

No ATA device present?

Similar Messages

Maybe you are looking for