No audio after capture in Premiere Elements Playback

I am capturing video from a Sony DV camcorder using an s-video cable. When I playback the captured video there is no audio. I have played the .avi file in Windows Movie Maker and there is no audio there either. any ideas???

S-video is only a video stream -- so of course you won't get any audio!
But more than that, capture from a miniDV camcorder should over a FireWire cable connection only.

Similar Messages

Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

It all depends on the codec the file uses, Karli.
What model of camcorder is this video coming from?
Are you working on a Mac or a PC? Have you got the latest version of Quicktime, per the program requirements? When you started your project, did you select the settings for a DSLR at 720p? This is a vital step since it will activate the components your computer will need to work with many of these types of files.
BY THE WAY, KARLI--
PLEASE do not post the same question more than once on this forum! You've already got a thread going with this same question and several responses posted. It's very confusing when you post the same question a second time and start a whole new discussion.

Audio volume problem in Premiere elements 12

How can I reduce or increase volume in the soundtrack???

Sorry for my English but I hope you understandthe following.
I have for the moment no time to go through your comments and ideas, but I certainly will do the coming days.
For good order I’ll explain my problem more in detail: (working with Window’s 7)
When I use Tools>smartmix, I change Audio 1 in “forground”, Comments in “foreground”, Soundtrack in “Background”, Audio 2 and 3 in “Background”. So far so good!.
Next step is: edit>preferences>audio>smartmixer, and the only thing I can change is “milliseconds (i.e. 10)”, “mix pause (i.e. 5 sec)”, and “reduce background in % (i.e. 90%)”. So far so good again!
The volume sound of the audio track is indeed reduced when there is a conversation in the clip, but not enough, so still too loud, certainly when the conversation stops, the volume sound is far too loud.
What do I want:
a) Remain the original volume from the conversations etc. in the clip, so don’t change anything in here.
b) Reduce the volume to the level I like!
I realise, this looks an easy and simple question, but I can’t fide out hou too lower only the volume in a soudtrack!
Waiting your reply and many thanks in advance
Regards
P.Gans
Van: A.T. Romano [email protected]
Verzonden: vrijdag 10 januari 2014 4:05
Aan: Maauwtje22
Onderwerp: Audio volume problem in Premiere elements 12
Re: Audio volume problem in Premiere elements 12
created by A.T. Romano <http://forums.adobe.com/people/A.T.+Romano> in Premiere Elements - View the full discussion <http://forums.adobe.com/message/5999094#5999094

After successfully installing premiere&elements 12, both programs abort after signing in. Fix pls?

After successfully installing premiere&elements 12, both programs abort after signing in with correct login & password. How can I fix it?

Moving this discussion to the Photoshop Elements forum.
M.Angela are you able to log into http://www.adobe.com/ successfully? Also which operating system are you using?

LEAD Codec for MotionJPEG-Premiere Elements Playback Issues

There are several reports online (here and elsewhere) recommending installing LEAD Codec for MotionJPEG-Premiere Elements Playback Issues. Most, if not all, of the feedback is that it works and is only $10 USA dollars.
Today I went in search of that codec at LEAD Technologies and could not find a $10 LEAD Codec.
http://www.leadtools.com/SDK/Multimedia/Multimedia-MCMP-MJPEG-codec.htm
Instead, I found a bunch of kits priced at way over $100.00.
From the chat service at that web site, I discovered that the LEAD codec is no longer sold separately. In order to get that codec, you would have to buy the Multimedia SDF Kit (priced $595.00).
Any workaround suggestions
OR
pay the $595.00 to get the LEAD Codec
OR
go the file conversion route for the MotionJPEG?
ATR

ATR,
Great news!
On the PrPro forum, it's been 100% for MainConcept, and 99% for Morgan. One user could not get the Morgan to work on his/her system, but that could well have been OE on that poster's part. Still, those are not bad odds, and the 'cost" of the Morgan is better...
Just glad that it worked for you.
Good luck,
Hunt

Audio stops working in playing back a clip captured in Premiere Elements 9.0.1

I am capturing from a Mini DV camcorder using Premiere Elements 9.0.1 (I believe the latest update). I started this project a few days ago and was not having problems and then suddenly no sound on playback. I hear sound when capturing clips. I am not capturing to timeline but when I go and pull up a clip to view/playback there is no sound. I tried dragging it into timeline and just double clicking on the clip. I can here the sound if I open in WMP. When opened a clip today in Premeire I had sound then next time nothing.

I have a Intel Duo Core 3.0 ghz pc with 4gb ram. I have done many other video edits with much longer video then these clips. These are some of my first Mini DV tapes I am converting/editing. anyway, I can see the audio with a yellow line through it (meaning looks normal, not processing still). When I drag the timeline cursor/bar I can hear the choppy audio segments as I drag it forward or backward. I tried pulling up a clip in a new project and waiting several minutes before trying to listen to it, no sound. Also, I pulled up an older project that I had worked on last and know I had no problems with the audio in that project. Have the same exact problem.
Any ideas?

Audio distortion during/after capture in Premiere Elements10

Why is the audio distorted (sounds like a cell phone that keeps losing a signal and every other word is garbled) when capturing a video from a DV camcorder in Premiere Elements10? I'm using a IEEE 1394 cable from the camcorder to the computer and DV camcorder is selected in the Premiere Elements setup menu. Any help.........please!

Capturing from a tape-based miniDV does not change the audio or video information in any way, Unkie. So if you're capturing from a miniDV camcorder and getting distortion, that distortion is happening in the camcorder itself.
But if you're getting distortion when you output your video, it could well be because your audio levels are too high.
As I say in my books, whenever you edit your video, you should go to the Window menu and open the Audio Mixer. Watch your audio levels as you play back your timeline. They should peak at Zero. If they're up in the yellow and red or are overloading the mixer, you are going to get distortion in your video output.
But if you're saying you're hearing distortion while capturing your video -- that's a whole other issue. You need to adjust your computer's audio levels or turn down your speakers. As I've said, capturing over FireWire does absolutely nothing to change the audio or video information that's coming in from the camcorder. It's just your computer playing it too loud.

AVI File Captured in Premiere Elements 8 Only Plays First Few Minutes

Hello folks,
I'm totally new to this. My problem: I've recently installed Premiere Elements 8 and used it to capture some mini DV video tapes (via firewire), without any significant problems (other than a few freezes). Now I've tried to capture some VHSC tapes via my TV card (Avermedia H727). The capture process went well (except that the preview screen was just a fuzzy mess!) but I had to plug the audio inputs into my sound card (onboard) rather than the TV card.
The caputred files are about 6 + Gb for a 30 minute tape but when playing the captured video back in PrE8 only the first few minutes is available (the length of playback seems to vary unpredictably (1 tape allowed 3 minutes of playback, another a bit less).   The full avi files can be played back in Roxio or Windows Media Player etc but not PrE8.
Interestingly, videos captured from VHSC via the same TV card in Roxio 2010 Pro will play back correctly and fully in PrE8.   I had to switch audio inputs to the TV card (rather than the soundcard) for the audio to be captured with Roxio.
My son has tried to help me with this (having some experience on PrE2) but he's also drawn a blank with this.
I'd be very grateful for any help that you might be able to give as I've not found anything in FAQ although it's not easy to succintly define my search for this problem.
Many thanks
Computer spec:
OS     Windows 7 Pro 64 bit
CPU     Intel i7 2.8GHz
RAM     4Gb DDR3
MB     Asus P7P55D Deluxe
HDD     2x Sata II Western Digital 1.5Tb (each)
Graphics     ATI Radeon HD 4300/4500 series
All updates for Windows 7 and PrE8 installed

Thanks John:
My PC has 2 HDDs and both are of the “green” variety. Both are partitioned (2 partitions on each HDD) with operating systems on the first partition (Windows 7 Pro 64 bit on one and Windows XP Pro -32 bit on the other, the operating systems are on different physical drives).
The tips relating to PrPro are hard to follow as they are quite technical and I’m not even sure which ones also relate to PrE8.   It would take me an age to try to wade through this lot.
My point is that my current setup (for all its imperfections) will capture video (via the TV card) using PrE8 as the capture software. The setup must be adequate for this task as the complete avi file is played back correctly on Roxio and Windows Media Player but PrE8 fails to recognise any video after the first 3 minutes (approx).
If I capture to PrE8 using a firewire connection from my mini DV video camera then the capture proceeds normally (apart from odd freezes) and the captured video is all playable in PrE8.
When capturing using the mini DV camera, I select "DV camcorder" in the “Get Media” menu. However, this only supports Firewire or USB sources.   When capturing from the VHSC tapes via the TV card I have to select “Webcam or WDM Device” as the media source (I’m not convinced that this is the most suitable capture mode but it’s the only one I can find that doesn’t look for either a firewire or USB device.
It seems as though PrE8 must be putting some code onto the captured video that prevents more of it from playing back because avi files recorded on Roxio will playback fully.   I've tried to copy the PrE8 avi files into a different folder (devoid of any PrE8 project files) and then renaming the file before importing into PrE8 but still only the first few minutes will play.   My thinking here was that perhaps one of the other associated project files that PrE8 creates might be the source of the corrupt info.
Many thanks for your interest and taking the trouble to respond.

Looping audio after capture

I'm capturing into CS3 premiere pro - Cannon Vixia HV30 and HV40 cameras, HDV 1080i30 (i60) project settings.
When playing the video in the timeline after capture, the audio in many spots loops and repeats on itself. The raw captured video when played via a media player works fine. Any suggestions on audio settings or a fix for this problem. Attached is a screen capture of my project settings.
Thank you!

What do you mean by "What setting are on the media"
My media is mini dv tape with 16 bit audio.
What setting are you using in Final Cut Express 3.5?
Under Easy Setup I have used DV NTSC
Sequence Preset: DV NTSC 48kHz
Capture Preset: DV NTSC 48kHz
Device Control Preset: Firewire NTSC Basic
Playback Output video: None
Playback Output Audio: Firewire DV
PTV Output Video: Same as playback
PTV Output Audio: Same as playback
View>Video Out>Canvas Playback
What computer are you using?
Power PC G5, Proc. 1.6 gHz, Mem. 2.25 GB DDR SDRAM, OS X10.4.9, Phantom Drive External 500 G conected by USB cable.
Camera is a Sony DCR VX2100 mini DV tape connected via Firewire.
What versions?
Quicktime 7.1.6
FCE 3.5.1
Dan

Audio Desync With Adobe Premiere Elements 12

Hello,
So I am trying to edit a game-play recording, and I have noticed that the audio begins to desync farther into the recording. At first the audio is fine and it gets worse the longer the video.
I am capturing the game-play using Nvidia Shadow play. ShadowPlay encodes video using H. 264 codec and outputs in MP4 format.
I had been recording video in 60 frames per-second and 50Mbps.
If anyone could help me out that would be great. I have searched for a solution, but have not found any. One explanation I read said the recordings were too compressed by ShadowPlay for Adobe Premiere 12 to handle, and the other explanation was that 60fps recordings were also the problem and they should be recorded in 30fps. I am not sure if those explanations are correct though.
Thank you in advance for any advice you can give.

ENJsGma
Premiere Elements 12...what computer operating system is your Premiere Elements 12 running on? Be that as it may, after you have your Timeline content ready for burn to disc (assumed DVD-VIDEO standard or standard widescreen) on DVD disc....
Tools
Movie Menu
.....now you should see a Choose A Menu dialog appear with a display of your theme choices
.....you select a theme and then hit "Continue" to bring you into the Movie Menu customization area.
Movie Menu Customization area
....here customize the menus, Preview to make sure the navigation buttons of the menus are working, then hit "Done" in the top right
Clicking Done to the Movie Menu customization area will bring you to the following view
Note the Publish+Share at the top right of the workpace. Click on that to bring up your export opportunities.
If you goal is DVD-VIDEO Widescreen on DVD disc, then the burn dialog might look like this just before you hit the Burn button.
Please review and consider and let us know if you are OK with the information provided. If not OK with the details, please let us know where you need supplemental details for what is not working for you.
Thank you.
ATR

"Audio Mix" volume settings premiere elements 10 not "sticking"

The "Audio Mix" volume settings that I set after adding a soundtrack to video in premiere elements 10 have stopped working and are no longer "sticky". I am running premiere elements on a Macbook pro with about 100GB free disc space and 8MB RAM. The volume settings adjusted using "Audio Mix" would previously "stick" as adjusted. I have not altered anything in how I adjust the volumes but "Audio Mix" has suddenly stopped functioning. Both the soundtrack and main captured audio track maintain full volume despite adjustment. I have tried to restart the computer and reload the program to no avail.

Correct.
I used to be able to adjust the volume with the Audio Mixer "on the fly" with the video playing and it would stay adjusted (as depicted in the tutorials). This no longer happens. The Mixer used to generate keyframes automatically. It no longer appears to generate keyframes and the volume remains at baseline for all the tracks.
I have not tried to manually set the volume level by dragging it and creating audio keyframes on it yet. I will try this but the videos are long with multiple fade ins and fade outs and this would likely be too laborious to accomplish.

Fitting audio to slides in Premiere elements

I am trying to create a slide show in PE 7. I added an audio clip. How do I make the audio extend till the end of the slide show?

You can slow down the audio but other than that there isn't any way to 'stretch' it out. You can add another piece of music after, or you could edit the music to make the clip longer.
The other option is to shorten the slideshow or to not show the images for quite so long.
The Photoshop Elements Slide Show Creator has a feature that will fit the slides to the music ;)
In Premiere Elements it is more of a manual process.

Can I use canon eos40d for stop motion capture in premiere elements 9?

I Want too do stop motion capture but when I click get media, the pop up dialog box proceeda as if to import still photos. How do I get the "capture panel" that is talked about where I can select stop motion? Is premiere elements 9 supposed to work with a still camera like mine for stop motion at all? Thanks!!' Kimberley

Kimberley
Thanks for the reply. This is my take on the situation that you describe.
You wrote
The camera was linked to PC with USB cable and then the software showed on the PC what would normally be in the camera viewfinder. The enter key on the PC worked as a shutter release and onion skinning worked. Can premiere elements do this?
That more or less describes the Premiere Elements Webcam experience if Premiere Elements recognized the Webcam.
If you have made a USB connection between the Canon 40D and the computer and you are not getting a Capture Window when you use Premiere Elements' Add Media Webcam or WDM compatible device, then Premiere Elements does not support that simple route. It is my understanding that WDM compatible device represents Windows Driver Model (a framework for device drivers).
I have done some Google searching, and I have found instance where claims have been made for the Canon 40D as a webcam. I post one of these links for informational and non promotional purposes.
http://extrawebcam.com/
Have you explore any utilities that came with the Canon that might supply drivers for the Canon as a webcam?
Have you tried to use the Canon 40D as a webcam with Windows Movie Maker?
Please review and consider. (Also, 9.0.1 Update can be downloaded and installed from the project's Help Menu/Update or obtained online from
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4929
We will be watching for further developments.
Thank you.
ATR

Issues with video quality after editing in Premiere Elements. Please help!!!

I am having issues with the quality of video output from Premiere Elements. I tried to combine 4 videos clips that I took (all were crystal clear when viewed prior to combining them in Premiere Elements). The first clip is quite pixelated, the second has wavy lines running across it the whole time (recorded webinar), and the third clip looks crystal clear. (FYI...first clip and third clip were both taken using the exact same settings on my Canon) I am not very tech "savvy". I am guessing it has something to do with the way I saved or "shared" the video after editing? But I have NO IDEA what settings I need as I am not very "tech" savvy! I want to upload the finished product to Vimeo. I looked on Vimeo and followed instructions from a tutorial that a Premiere Elements user posted about how to save the best quality video for uploading to Vimeo, and the quality turned out FAR WORSE than the first time I saved it. Please help!!! Thanks so much!

Thanks for your response John! Do you think my issue may be due to the way I initially "set up" the project when I created a new project from the very beginning? I am operating on Premiere Elements 10, so I do not see an option for sharing online directly to vimeo....only facebook and Youtube. I am combining 4 video clips. 3 of the 4 clips were shot on my Canon EOS 60D, and 1 of the video clips was a recording of a PowerPoint based webinar that we did via Meeting Burner (meetingburner.com). Since I am combining more than 1 video format, is it likely that I will run into quality issues? The strange thing was that 2 of the clips shot with my Canon showed up blurry after exporting/sharing my final video, but one of them was still crystal clear. This doesn't make any sense to me since I did not change any settings on my Canon. I didn't see any specific tutorials on setting up the project to match the video from that list of Tutorial links.

After 2 years Premiere Elements 9 not working

I bought a Dell desktop in 2012 and it came with Premiere Elements 9 installed. Apart from some freezing and shutting down problems, the program has worked fine. Just recently, however, the program stopped working. I can get to the home screen, but when I try to open a new or existing file the program goes nowhere, almost as if it has gone into some kind of loop and it can't complete the opening of the project.
I have reinstalled twice but that hasn't fixed the problem. I am running Windows 7 with 6.1.7601 Service Pack 1. The system is x64 with 8gb RAM, and I currently have over 100 gb hard drive space free. I feel like I've done all the basic fixes that a computer novice can do, but I'm not getting anywhere. Any help would be appreciated.
Thanks!

Captain Karloff
The troubleshooting basics for this might include:
1. Video card/graphics card driver version up to date according to the web site of the manufacturer of the video card/graphics card. (I am assuming you have just one card, not two. If otherwise, please let us know.)
2. Latest version of QuickTime.
3. Program running as Run As Administrator and from User Account with Administrative Privileges
If your video card/graphics card driver is up to date, then try deleting the BadDrivers.txt file.
Local Disc C
Program Data
Adobe
Premiere Elements
9.0
and in the 9.0 Folder is the BadDrivers.txt file that you delete. Once you open the program again, the program will generate a new BadDrivers.txt file and hopefully the program is gone. Make sure that you are working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the whole path cited.
Have you tried to delete the Premiere Elements Settings File
Local Disk C
Users
Ower
AppData
Roaming
Adobe
Premiere Elements
9.0
and in the 9.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists. Make sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the whole path cited above.
Have you gone through the processes of getting rid of pile ups of preview files, conformed audio files, and conformed video files. See Adobe Premiere Elements Preview Files Folder, Media Cache Files Folder. Also, hit the Clean Button in the Media Cache Database area accessed from Edit Menu/Preferences/Media.
Are you working from the 9.0.1 Update version of Premiere Elements 9?
Please review and then let us know if any of the above had any impact on your issue.
Thank you.
ATR
Add On...A ccleaner run through (regular cleaner and registry cleaner) may be indicated by itself or as part of
Deactivation, uninstall, ccleaner run through, reinstall with antivirus and firewalls disabled.
Add On...What antivirus program are you running? McAfee, by any chance?

No audio after capture in Premiere Elements Playback

Similar Messages

Maybe you are looking for