No audio after Compressor

I compressed my FCP project using DV footage to MPEG-2 6.2Mbps 2-pass 4/3.m2v for Best Quality DVD 90 minutes. The end result has no audio. I've also noticed that the compressor movie is around 72MB whereas when I use Export-Quicktime Movie, the file is about 372MB. I thought the Best Quality DVD would do just that, best quality. Do I have wrong information and can anyone help on the audio not coming through?
Thanks,
Hagen

There's no audio in an MPEG-2 elementary stream. You need to also encode your audio as AC3. In the folder where you found the MPEG-2 preset there's another one for audio. Use that. Then you have to bring both those files into DVD Studio Pro. The file sizes sound right.

Similar Messages

TS3789 I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until

I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until proven for example ios6 on iPhone with that stupid map app instead of google maps.
I just want to buy and hear my iTunes music and videos on my apple tv, could before cant now. Thank you apple. Time to pack up the apple tv and start torrenting without the ios-bs.
Disheartened apple fan.

Welcome to the  discussion forums.
Try going to synching in the sources menu on your tv and selecting 'change itunes library', when it gives you the passcode check itunes to see if the tv is showing up as a new device, if so try entering the pass code. It may be that your tv is seeing itunes as a different library because of a recent upgrade.

Sony DCR SX65 has no audio after import

My iMovie app on my Mac Mini has lately not been loading audio after videos have been imported from my Sony DCR SX65. This is something recent as I have previous videos with sound but now it all my uploads do not have sound.

hey there William & welcome to Discussions.
is the VHS tape old or the MiniDV tape? if VHS, it could be that the signal has just deteriorated over time--it can happen w/ poor storage(heat, laying tapes on flat, not re-wound, etc...) & just age. have you tried not recording to MiniDV & just sending the VHS signals through the Sony w/ out a tape in it? it could be that one or more of you audio cables has gone bad, you may have dirty heads in either the VHS VCR &/or the MiniDV or have audio in problems w/ the Sony &/or audio out problems on the VHS VCR or maybe you have a FW issue on the Sony or w/ your FW cable. if you have access to another cam &/or VCR as well as FW & A-V cables, start swapping/troubleshooting & see if your results improve.
good luck.

Since 5.1 update, my Apple TV has no audio after waking from sleep mode. I can get audio back if I manually put it to sleep through settings. Help please?

Hello,
Since the 5.1 update, my Apple TV 2 has no audio after it wakes from sleep mode. To get audio back I need to go to settings and manually put it to sleep then wake it up. Once I do this I have audio. I have restarted the Apple TV as well as me modem and router. I have searched the boards and cannot find a solution. Please help.

mrdctaylor wrote:
Since I updated to the latest/greatest version of the software I can no longer put my Apple TV to sleep by holding down the middle button.
Thanks!
Apple have changed this setting with the Apple TV Software Update 5.1:
About Apple TV (2nd and 3rd generation) software updates
Feature
Summary
Shared Photo Streams
Accept invitations for Shared Photo Streams, browse photos and comments, and receive notifications of new content.
AirPlay
Send audio content from Apple TV to AirPlay-enabled speakers and devices (including AirPort Express and other Apple TVs). Also includes the ability to require an onscreen code to use AirPlay with your Apple TV.
iTunes account switching
Save multiple iTunes accounts and switch quickly between them.
Trailers
Search movie trailers. In the United States, see show times for local theaters.
Screen savers
New Cascade, Shrinking Tiles, and Sliding Panels screen savers.
Main menu
Reorder icons on the second page by holding down the select button on the remote.
Subtitles
SDH support for the deaf and hard-of-hearing as well as improvements to viewing and selecting subtitles.
Network configuration
Support for setting up advanced network options using configuration profiles. Seehttp://support.apple.com/kb/HT5437 for more information.
Stability and performance
Includes general performance and stability improvements.
If you don't like this, you can leave feedback here: Apple Feedback

MacBook OSX 10.6.5 No audio after update

Hello, My aluminum 13" MacBook has been fine up until a few weeks ago. The internal speakers do not work after Mac OSX 10.6.5 boots up. I hear the 'gong' on initial start up... but no audio after OSX boots. I have tried plugging in headphones, using a toothpick- nothing works. The sound preferences show 'Internal Speakers' and Built in.
Another interesting fact is iTunes reports "an unknown error occurred -200". Very helpful message.
If I boot into Windows Vista using BootCamp.. audio works just fine. So, the speakers and audio hardware are not malfunctioning. It's clearly an OSX configuration problem.
Any ideas on what I can do to get my audio back? The only thing that has changed was I let Apple Updater install a few patches.

If you have not already done so, run Disk Utility's "Verify Disk" & "Repair Permissions" routines on your startup drive (in that order). If the verify disk step finds any problems, you must correct them before continuing.
Try creating a new, temporary user account. Restart your Mac, logging into that account only. If the speakers now work then something associated with your normal user account is the problem, such as a login item or bad preference file.
If the speakers still don't work with this account, you can delete it. Then try starting up in Safe Mode. If the speakers now work something that Safe Mode disables is the culprit, such as a third party or non-essential extension, an add-on system modifier, startup item, etc.
If none of the above help, try downloading & installing the 10.5.6 combo update. If that doesn't help then you may need to reinstall the OS & update it to the current version.

How can we monitor the audio after the cleanup process before we actually record the trans

I have the Sound Blaster Audigy 2 ZS board and I am using it to transfer vinyl records to make CDs. Before my upgrading of Creative Media Source 2 to Creative Media Source 5, I was able to monitor the audio after the cleanup prior to the transfering process. Now I can only monitor the sound at the line input point and not after the cleanup process. Is there any way that we can do that?Vinylrecord

Assuming you mean Actions when you say "Batches", use this menu...
1. Click on the name of the actions set you wish to save.
2. Click the fly-out menu icon at the upper-right corner.
3. Save Actions, put them someplace on your hard drive other than in the Photoshop installation area.
-Noel

No audio after restart hp4515

Hy
I recently bought hp - s 4515s probook, since its only op system was linux i replaced it with xp , i installed all drivers but for some reason i lose audio after restart, at the moment the only way for me to get audio is by installing the Microsoft Universal Audio Architecture (UAA) Bus Driver for High-Definition Audio every time i start the machine.
Does anybody have the same problem or know a solution for this kind of behavior ?

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Swipe upwards from bottom of screen to launch Control Center. Make sure sound is not muted (tap the little bell)

How I can link back video and audio after I unlink them

how i can link back video and audio after I unlink them

In what program? You may wish to ask such specific usage questions in the product forum for whatever tool you are referring to...
Mylenium

Please somebody help me lost audio after opened logic 9 and X at the same time helpppp

helppp please lost audio after opened logic9 and X together can't find the solution i only have audio in the main output of my audio interface gott a motu 828 MKII somebody help me please

Hello all looks normal when the problem was presented simultaneously opened LPX LP9 and when you return to open a new project or the same project and I only have audio in my headphones output interface, my interface is a motu 828Mk2 the project exists and the interface looks normal in every normal output comprises all looks normal just never sounds like it had passed but never opened the two programs at the same time not to do, I use a digital mixer yamaha normal surface responds as ccontrolador all seems to work perfect but I only have audio output from the headphones even if I motu channel by channel and I assign output sound headset

No audio after using capture now to log files

I'm trying to import some footage into final cut pro but having trouble getting the audio to work. I'm using my camera as a deck and I can hear the sound coming from the camera, I can also hear it when I'm logging/capturing and when i'm using capture now. someone had suggested that I turn off the audio in the sequence and canvas. I'm not sure how to turn it off in the canvas but i tried turning it off in the sequence and I still don't get audio after I capture the clips. Any ideas/suggestions?
thanks

Was the source audio button checked to on in the Log & Capture > Clip Settings window?

Problems with audio after playback

So sorry in advance if this has been asked before but im not 100% sure on how to describe the problem im having with my audio after export. heres a link to the video- https://drive.google.com/file/d/0Byffs2-9EE3bdDdWcDNVNGVaMnc/edit?usp=sharing . ***PLEASE NOTE THAT THE LYRICS ARE EXPLICIT AND WHILE THE VIDEO MAY BE OF A VIDEO GAME IT IS GRAPHIC*** So the audio sounds fine while editing and when i export the level is around -18db but when playing it back in quicktime it almost sounds like its crackling and popping and im unsure why. if it makes a difference im playing it back through some monitors connected through my UA Apollo Quad interface. thanks to anyone who can help me figure out whats wrong.

Hi fox5urf3r,
Welcome to the forum. I would suggest that you try listening on other speakers. Sounds OK to me.
Thanks,
Kevin

Why do I loose quality after compressor?

I have quality loss after I use compressor. The file compressor makes looks much worse than the file I export from FCP. Can anyone help?? My project is 1440x1080, and I export quicktime movie as apple ProRes 422 1440x1080 30p. The exported file looks great, but after compressor it looks bad. thank You for any help.

How are you compressing it?

Systematic Pixelation in mpeg2 After Compressor

I shot an event included in which are a series of 4 speeches (SD, mini-DV, 29 fps, Sony pd170). All four speeches look fine on the source tape and in FCP (v 6). They are typical head & shoulders speech shots. The total runs time for the project is ~50 min. The issue comes up at 32:30. After exporting from compressor (the one that comes with FCP v 6), a section of 2 of the speeches shows complete pixelation for 1-2 frames. This occurs every 13 frames for approximately 10 minutes. Then the video returns to its normal pristine condition. I have re-compressed a number of times to no avail. I have never seen this before and am dead in the water. I need to get this into DVDSP (v 4.2) this weekend. I have not inserted extra compression markers--this is not a high speed video (and the other speeches came out great).

thanks for the reply.
I am judging my video by playing it back in the Viewer, when I add it to a track. I haven't burned the DVD yet.
Here's what I'm doing:
Export from FCP to Compressor (this is a single 5 min QT movie file, that I captured straight from my DV cam to FCP)
my presents in Compressor are: 1 pass CRB,
mpeg2 elementary, NTSC CCIR 601/DV, 29.97, frame controls: automatic, 4:3, Average data rate: 4.5, bottom first.
HOWEVER, I have also followed the same steps on another 5 min FCP project, this one consists of
multiple clips from several different sources, with effects, filters, much more complicated, and it looks great ... with the same settings as above.
Don't know what is the problem with the 5 min QT movie.
After compressor, it looks like bad vhs video.
Any ideas?

After compressor, video looks very bad

I exported my Final Cut Pro timeline using Compressor,
because I want to convert to mpeg2 to burn to DVD.
After it is exported and in compressor, I choose the
Apple setting for DVD Best Performance 90 min 4:3.
The total time of my timeline is about five minutes.
After it is converted, I play it back in the Simulator and it looks really bad, grainy, blurry, like a poor quality vhs video.
I don't know why this is.
Can someone help please.
thanks.

thanks for the reply.
I am judging my video by playing it back in the Viewer, when I add it to a track. I haven't burned the DVD yet.
Here's what I'm doing:
Export from FCP to Compressor (this is a single 5 min QT movie file, that I captured straight from my DV cam to FCP)
my presents in Compressor are: 1 pass CRB,
mpeg2 elementary, NTSC CCIR 601/DV, 29.97, frame controls: automatic, 4:3, Average data rate: 4.5, bottom first.
HOWEVER, I have also followed the same steps on another 5 min FCP project, this one consists of
multiple clips from several different sources, with effects, filters, much more complicated, and it looks great ... with the same settings as above.
Don't know what is the problem with the 5 min QT movie.
After compressor, it looks like bad vhs video.
Any ideas?

My dv7 has a very bad warble in the audio after a recent automitic upgrade.

My dv7 has a very bad warble in the audio after a recent automatic upgrade. I have tried to revert the audio drivers back to a previous version but that has not helped.

Hi Mikehow,
May I please you to write which dv7 you exactly own (e.g. a dv7-6190)? You could also post your P/N (not the S/N, please) here.
This would really help!
Thanks!
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on “Kudos” STAR to say thanks!***

No audio after Compressor

Similar Messages

Maybe you are looking for