No audio after using capture now to log files

I'm trying to import some footage into final cut pro but having trouble getting the audio to work. I'm using my camera as a deck and I can hear the sound coming from the camera, I can also hear it when I'm logging/capturing and when i'm using capture now. someone had suggested that I turn off the audio in the sequence and canvas. I'm not sure how to turn it off in the canvas but i tried turning it off in the sequence and I still don't get audio after I capture the clips. Any ideas/suggestions?
thanks

Was the source audio button checked to on in the Log & Capture > Clip Settings window?

Similar Messages

  • FCP 4.0 issue - using capture now, freezes after 5 minutes

    Capturing miniDV to FCP 4.0 using capture now on external drive. Never had any problems in the past, but now FCP freezes after a little more than 5 minutes of capturing. I have to force quit. When I find the file on my hard drive it's about 10 GB. Haven't used FCP in several months. Is it possible some settings got screwed up? No problem capturing via iMovie 4.0 so the problem doesn't seem to be with the drive.
    Any assistance would be very much appreciated.
    Nick
    Message was edited by: nlevitin

    Just to reiterate what Shane and David told you. Updating to QT 7.4 is probably not going to solve your issue. It might make things worse though. You need to do what they said and get your quicktime version they recommended. Now, if it works for you, fantastic, but there have been enough posts on this topic and chances are very slim to null that QT 7.4 will work for your version of Final Cut.
    And please be prepared to do an erase and install if the archive and install does not work.
    One more idea might be to use a program called Pacifist. (Search the forum for Quicktime and Pacifist) You may be able to use that. Anyone can correct me if I am wrong here.
    -Albert

  • Using Capture Now HELP

    I am new to FCE and wish to use capture now to get a whole tape onto the system. I have set the time limit to 60 minutes. Then when I start Capture Now everything runs okay until I get a message stating. "Capture ended due to lack of disk space" on viewing the contents/data regarding the file it has copied 9.25 minutes of video at 2GB.
    I have a 500Gb external hard drive nominated as a scratch disk.
    I have tried altering system settings in FCE but still have the same problem.
    I am using a canopus advc110 to transfer the video onto the system.

    you should reformat your external hard drive to os extended. copy everything on your external you want to keep, then reformat.
    http://www.kenstone.net/fcphomepage/partitioningtiger.html

  • Allocating Disk Space using capture now.

    FCE seems to freeze up with a messege that says "Allocating Disk Space" when using capture now.

    If you have an anti-virus app running disable it.
    Check FCE>System Settings>Scratch Discs. Make sure the Limit Capture Now has a value entered and the box is ticked. Default is 30 mins, it can be changed to suit the capture.
    If you find a huge file with nothing in it this a probably a result of not having a value set. Delete it and start over.
    When no value is set, FCE does not know how much drive space to allocate, so it grabs everything it can get it's hands on. That's why you can get that huge useless file.
    Al

  • Lack of disk space using "Capture Now"

    aright here's the situaton.. evry time i capture footage using "Capture Now" it captures it for a while and then just stops and a window pops up saying: capturing ended due to lack of disk space.
    How can i fix this?

    I'm thinking it might be closer to...
    1) Set a limit on Capture Now. Never have that box unchecked. Set it to 60 min if you want the whole tape.
    2) Do not under any circumstances run any anti-virus/filesaver software. Including Norton and Virex. Sure, Apple doles out Virex for free, but FCP doesn't cooperate with it very well.
    If you absolutely feel you must keep Virex installed on your system then use Kevin's script to shut it off before you use FCP:
    http://discussions.info.apple.com/webx?[email protected]@.68a85d17
    3) Do not capture to your main system drive.
    4) Check the format of the drive you are capturing to. It should be Mas OS Extended, jornalling off. If it isn't, copy your files from it and re-initialize it. If it is any other format, you will encounter problems. If not at first, then eventually.
    Good luck,
    CaptM

  • Cannot import using "Capture Now"

    I have what I hope is a minor problem with importing HDV using Final Cut 7. I can import fine using "Clip", where I set the in and out points. But when I want to simply "Capture Now", it fails every time. It captures for less than one second, then says "searching for media", but never finds/imports anything.
    So my question is, why would 'capture clip' work fine but 'capture now' doesn't work at all, using the same media? I am using a Sony FX-7 HDV camcorder via firewire, Final Cut 7, and the HDV 1080i60 codec.
    Thanks,
    Ben

    Yes the tape is playing, but it only shows the image for about 1 second, then it goes black and says "searching for media". The tape continues to play in the camera, but FCP won't import anything.

  • Applications Crash After Use Of Open/Save/Pick File or Folder Dialog

    Hi, all.
    This has been a problem since I installed 10.6 (the day it was released).
    The 10.6.1 helped somewhat, but this is still a real problem.
    I'll describe what happnes:
    I'll be in a program (any program: MS Word, TextEdit, Safari, anything) and I'll use any of the following dialogs:
    -Open
    -Save Pick
    --a-file
    -Pick-a-folder
    or anything like that.
    Then, never during the time I'm using the dialog, always soon (there's often a delay of a few seconds) afterward, I'll get a message saying that the program quit unexpectedly. It says that an error report has been sent, and gives me the option the reopen the program or ignore the quit. (Except MS Word; it has it's own error reporting system).
    Now, this is a BAD program because it happens when I save something.
    It is important for me to note that this doesn't happen all the time. Some programs seem more stable than others, and some file formats (the one I select) stabler than others. Also, it seems that (at least with Safari) I can do things to reduce the likelihood of this crash happening. Sometimes opening using Rosetta helps. Sometimes 64-Bit helps. Sometimes disabling the cache helps.
    It all seems pretty random.
    Bottom line: this is REALLY annoying, especially when it occurs after use of the save dialog. Apple needs to fix this.
    Is there a way for me to fix this myself?
    Apple Hardware Test comes out clean. No problems with my startup disk, as far as I know.
    It is nice to have QuickLook available in these dialogs, but if that's what's causing the problem, it'd be worth it to me to disable it. Any way to do that, just to try?
    Anyone have any other ideas?
    Thanks!
    -Nate

    Thanks for the reply and info!
    All right, so I found crash reports for each recent such crash.
    Here's the most recent one, caused by either an open or a save (I can't remember which) dialog. I think I clicked Cancel on that dialog, but it crashed anyway. Here's the part of the log you mentioned (Sorry for the links in that, they aren't supposed to be there, and I sure didn't make them myself):
    The .crash file can be found here.
    Process: TextEdit [550]
    Path: /Applications/TextEdit.app/Contents/MacOS/TextEdit
    Identifier: com.apple.TextEdit
    Version: 1.6 (264)
    Build Info: TextEdit-2640000~1
    Code Type: X86-64 (Native)
    Parent Process: launchd [93]
    Date/Time: 2009-10-10 08:09:47.315 -0700
    OS Version: Mac OS X 10.6.1 (10B504)
    Report Version: 6
    Exception Type: EXC_CRASH (SIGABRT)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Crashed Thread: 0 Dispatch queue: com.apple.main-thread
    Application Specific Information:
    abort() called
    Thread 0 Crashed: Dispatch queue: com.apple.main-thread
    0 libSystem.B.dylib 0x00007fff85b7eff6 __kill + 10
    1 libSystem.B.dylib 0x00007fff85c20072 abort + 83
    2 libSystem.B.dylib 0x00007fff85b37095 free + 128
    3 com.apple.DesktopServices 0x00007fff8571fcbe TFSInfo::~TFSInfo() + 38
    4 com.apple.DesktopServices 0x00007fff85720195 TFSInfo::RemovePtrReference() + 37
    5 com.apple.DesktopServices 0x00007fff85738114 TNode::IsUnresolved() const + 52
    6 com.apple.DesktopServices 0x00007fff8572cc40 TNode::SetAliasTarget(TNodePtr const&, bool) + 246
    7 com.apple.DesktopServices 0x00007fff8575c185 TNode::ClearAliasTarget(bool) const + 55
    8 com.apple.DesktopServices 0x00007fff8575ceca TNode::RemoveSelf(TNodeEventPtrSet&) + 170
    9 com.apple.DesktopServices 0x00007fff8575d347 TNode::RemoveAllChildren(bool, TNodeEventPtrSet&) + 473
    10 com.apple.DesktopServices 0x00007fff8575d400 TNode::RecursivelyRemoveAllChildren(bool) const + 72
    11 com.apple.DesktopServices 0x00007fff8575dc8a TNode::Finalize(TNodePtr*&) + 58
    12 com.apple.DesktopServices 0x00007fff8575df09 TNode::Finalize() + 229
    13 com.apple.DesktopServices 0x00007fff85775dd4 NodeContextClose + 466
    14 com.apple.AppKit 0x00007fff8645e73b _NSSavePanelContextEnd + 66
    15 com.apple.Foundation 0x00007fff8003b500 __NSFireDelayedPerform + 404
    16 com.apple.CoreFoundation 0x00007fff82207a78 __CFRunLoopRun + 5480
    17 com.apple.CoreFoundation 0x00007fff8220603f CFRunLoopRunSpecific + 575
    18 com.apple.HIToolbox 0x00007fff8315dc4e RunCurrentEventLoopInMode + 333
    19 com.apple.HIToolbox 0x00007fff8315da53 ReceiveNextEventCommon + 310
    20 com.apple.HIToolbox 0x00007fff8315d90c BlockUntilNextEventMatchingListInMode + 59
    21 com.apple.AppKit 0x00007fff85db1520 _DPSNextEvent + 718
    22 com.apple.AppKit 0x00007fff85db0e89 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
    23 com.apple.AppKit 0x00007fff85d76a7d -[NSApplication run] + 395
    24 com.apple.AppKit 0x00007fff85d6f798 NSApplicationMain + 364
    25 com.apple.TextEdit 0x0000000100000fb8 0x100000000 + 4024
    Thread 1: Dispatch queue: com.apple.libdispatch-manager
    0 libSystem.B.dylib 0x00007fff85b49b16 kevent + 10
    1 libSystem.B.dylib 0x00007fff85b4ba19 dispatch_mgrinvoke + 154
    2 libSystem.B.dylib 0x00007fff85b4b6d6 dispatch_queueinvoke + 195
    3 libSystem.B.dylib 0x00007fff85b4b1f6 dispatch_workerthread2 + 244
    4 libSystem.B.dylib 0x00007fff85b4ab28 pthreadwqthread + 353
    5 libSystem.B.dylib 0x00007fff85b4a9c5 start_wqthread + 13
    Thread 2:
    0 libSystem.B.dylib 0x00007fff85b4a94a _workqkernreturn + 10
    1 libSystem.B.dylib 0x00007fff85b4ad5c pthreadwqthread + 917
    2 libSystem.B.dylib 0x00007fff85b4a9c5 start_wqthread + 13
    Thread 3:
    0 libSystem.B.dylib 0x00007fff85b4a94a _workqkernreturn + 10
    1 libSystem.B.dylib 0x00007fff85b4ad5c pthreadwqthread + 917
    2 libSystem.B.dylib 0x00007fff85b4a9c5 start_wqthread + 13
    Thread 4:
    0 libSystem.B.dylib 0x00007fff85b749f2 select$DARWIN_EXTSN + 10
    1 com.apple.CoreFoundation 0x00007fff82228252 __CFSocketManager + 818
    2 libSystem.B.dylib 0x00007fff85b69f66 pthreadstart + 331
    3 libSystem.B.dylib 0x00007fff85b69e19 thread_start + 13
    Thread 0 crashed with X86 Thread State (64-bit):
    rax: 0x0000000000000000 rbx: 0x0000000000000004 rcx: 0x00007fff5fbfe2c8 rdx: 0x0000000000000000
    rdi: 0x0000000000000226 rsi: 0x0000000000000006 rbp: 0x00007fff5fbfe2e0 rsp: 0x00007fff5fbfe2c8
    r8: 0x0000000000000e03 r9: 0x0000000000000000 r10: 0x00007fff85b7b036 r11: 0x0000000000000206
    r12: 0x0000000100847600 r13: 0x0000000100043000 r14: 0x0000000000000000 r15: 0x00000001001bad10
    rip: 0x00007fff85b7eff6 rfl: 0x0000000000000206 cr2: 0x0000000100401000
    And, now that you mention it, yes: there are aliases in the CrashReporter folder to some of the crash files in the DiagnosticReports folder. Oddly, only those that belong to AppleScript Editor are present.
    As for the system.log:
    Here's what happens right after one of the crashes (Again, sorry for the mystery links):
    Oct 10 17:30:15 nathan-greensteins-macbook com.apple.launchd.peruser.501[97] ([0x0-0x36036].com.apple.TextEdit[463]): Job appears to have crashed: Segmentation fault
    Oct 10 17:30:16 nathan-greensteins-macbook ReportCrash[546]: Saved crash report for TextEdit[463] version 1.6 (264) to /Users/ngreenst/Library/Logs/DiagnosticReports/TextEdit2009-10-10-173016nathan-greensteins-macbook.crash
    So, what's a Segmentation Fault? That looks like the problem right there.
    Thanks again!
    -Nate

  • Capture odi error log files

    hi
    how to capture an odi error log file for an odi package?
    Kindly suggest me in this.

    ODI execution log is stored in the repository, so you could query it to retrieve the needed information. Also you could use substitution api getPrevStepLog() to retrieve error log (code & message) for the certain step. And for OdiOSCommand you could capture error log in the specified Error file.

  • Use of standby redo log files in primary database

    Hi All,
    What is the exact use of setting up standby redo log files in the primary database on a data guard setup?
    any good documents?

    A standby redo log is required for the maximum protection and maximum availability modes and the LGWR ASYNC transport mode is recommended for all databases. Data Guard can recover and apply more redo data from a standby redo log than from archived redo log files alone.
    You should plan the standby redo log configuration and create all required log groups and group members when you create the standby database. For increased availability, consider multiplexing the standby redo log files, similar to the way that online redo log files are multiplexed.
    refer the link,and Perform the following steps to configure the standby redo log.:-
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/create_ps.htm#i1225703
    If the real-time apply feature is enabled, log apply services can apply redo data as it is received, without waiting for the current standby redo log file to be archived. This results in faster switchover and failover times because the standby redo log files have been applied already to the standby database by the time the failover or switchover begins.
    refer the link
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/log_apply.htm#i1023371

  • Unable to Initialize video deck, you may still use capture now. ??

    Im trying to capture footage off my sony DCR-TRV900. Ive been able to do it before, but all of a sudden i cant. Ive tried all sorts of crap like switching cables, even sending the camera in. I dont know if settings got messed up or crap like that, but now my FCE is just acting weird with the camera plugged in. If i try to start it with my camera plugged in with VTR on, it will just crash. Ive been using FCE for 2 years now, and i really don't think i changed anything preference-wise. The only MAJOR change to my computer has been leopard, and if that somehow screwed it up, i will be ******. I can capture using a different camera, by putting the tape that i used in my 900 into a DCR TRV9. however, it always fails to capture correctly, screwing up the audio and leaving it un-synced. If someone could help me, it would be a life saver, thanks. Also, i wouldn't consider myself a beginner, but i taught myself how to use this program from the ground up, so i might be missing a crucial step.
    Comp specsM
    IMAC
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.16 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 2 GB
    Message was edited by: alex2928

    Let's start over.
    I confused myself by invoking the Capture window. Of course that didn't work.
    This was a completely different problem. My apologies.
    The real problem was that the Log and Transfer window displayed ONLY the Logging pane. The clip list and queue pane were hidden and I couldn't get them back. I eventually found that resizing the entire window - even a small nudge - restored the missing panes. I expected the pane divider bar to not reveal the clip list, but this doesn't happen until the bar gets at least halfway across the window at which point the pane suddenly pops into view. This also confused me.
    For the record, I'm using a MacBook core solo running Leopard. My Panasonic SD1 camera is not connected. The files from dozens of camera cards are stored on an external USB drive. I copy selected AVCHD folders from the USB drive to the root directory of the MacBook boot drive so that FCE will recognize them. The scratch disk is a large Firewire 400 drive also connected to the MacBook.

  • Software 2.0 : no audio after using USB accessory

    I've discovered what I believe is a rather interesting (and rather serious) bug in the iPhone 2.0 software:
    When an USB IAP accessory (such as a lot of newer car stereos) is connected and disconnected a couple of times the audio output from the iPhone will often stop working. Disconnecting the accessory or plugging/unplugging headphones does not fix the problem.
    And I mean the audio completely dies: I get no audio from the phone, voicemail, ringtones, iPod, or system sounds from the speaker, headphones, or dock output.
    It's like the audio drivers crash. Sometimes the audio will start working again after a long period of time (like if the phone has been sitting idle for hours while I'm at work) but usually I have to reboot to get it working. It seems when I can get audio to work again without a reboot, I get a new crashReporter log about mediaserverd the next time I sync.
    The problem occurs when the phone is connected to an iPod accessory that uses the IAP audio-over-USB capability (I tried my Pioneer car stereo and a Kenwood stereo at Best Buy) It does not occur when connected to an accessory that only uses analog audio. I've seen it happen on my iPhone 3G and the original iPhone, so I know it's not a hardware problem.
    I know for a fact the Pioneer and Kenwood units I tested are stated as having USB inputs compatible with the iPod Video, iPod Nano, iPod Classic, and iPod touch. (I can confirm the Pioneer does work fine with my old iPod Video.)
    Multiple reviews have shown them to also work well with original iPhones running 1.1.4 and below (even if you do get the "not made for iPhone" warning)
    However, both phones I tested are running 2.0. Which leads me to think this is a bad 2.0 bug?

    "It's by design..."
    Nope; not referring to "airplane" mode issues here. This does seem to be a compatibility issue with USB devices, regardless and independent of the response to "use Airplane mode?" dialog.
    Experiencing this, good to know others are too, bad to know it's still an issue (and misunderstood too?).
    Steps to reproduce:
    1. Connect iPhone3G to a USB-compatible audio device (Kenwood car stereo here, front USB input, model KDC-MP438U).
    2. Car stereo functions correctly, lets me browse and playback songs for up to 2 minutes
    3. Playback ends abruptly; car stereo reports a "USB Error".
    4. Remove iPhone from connector (after pressing and holding "USB Remove" button on car stereo).
    5. Audio playback thru iPhone has ceased. Voicemail, apps/games, etc... no audio.
    6. Reconnecting the iPhone (without a full reset) appears to resume playback (track timer indicator resumes), but no actual audio.
    6. iPhone reset returns functionality.
    Side note: my iPhone is charging correctly during the 2 minutes of functioning playback. I'll check again if it's continue to charge after audio ends.
    Also checking Kenwood forums, but the fact you (TWParker) have experienced the issue across stereo brands, and only after 2.0 update, seems to point finger to Apple.

  • No audio after using Jump To Slide

    I've created a presentation using Captivate 2 to demonstrate
    some new software features of a program I am working with.
    I wanted to give the user the option to re-watch any of the
    slides after completed so I created a "Channel" slide with buttons
    that Jump To copies of each slide which are in turn instructed to
    jump back to the "Channel" slide.
    While the buttons and functionality work just fine, the audio
    on these slides will not play.
    Has any one encountered this? I am open to other suggestions
    as well!
    Thanks :-)

    I fixed it!!!!!!!! I created a separate copy of each audio
    file instead of reusing them on later slides.

  • No audio after using Compressor

    Hello folks,
    I have NTSC DV video, which I am trying to compress using Compressor. I am using DVD MPEG2 5.0 Mbps 2 pass compression with Dolby Digital audio at 192 Kbps. Everything seems to work fine, compressed video has much smaller size, quality is good... but there is no audio. Any idea what I do wrong?
    Thank you for any advise.

    Hello.
    When using Compressor to encode to DVD, 2 separate files are created, m2v (video) and ac3 (audio). They are not muxed together. You then import both of those files into DVD Studio Pro, and combine them on a video track there.
    A really good website that will walk you through the workflows associated with Compressor and DVDSP is DVD StepByStep
    What is your target delivery source? DVD, web?

  • Plugged Ipod into Mac after using Windows--Now Corrupted

    My friend recently plugged my ipod into his mac and my pc computer wont recognize it anymore. The screen is different when it says "do not disconnect" like it would be if you use a mac with it. I got it to recognize it once, restored it and loaded up my music again which worked until I plugged it in to my computer the next time and the mac do no disconnect came up and now some songs wont play and it will cycle through playlists and skip some of the songs. Please help...i want to kill my friend who plugged it into his mac.

    Daphne,
    Quite alright, as for the music transfer you can still use said way as before.
    Using your ipod as a disk to move music is really only good if you have the original hard drive to use. You must copy the files onto your ipod in a different manner then that of iTunes. Example You would open my computer drag the files 'including music' to your ipod. You would then plug your ipod to your mac, it will mount a little ipod icon on your desktop, you would then drag the files off of your ipod either into the correct music folder or (if you have it setup in itunes to copy to itunes music folder) right to itunes.
    As for formated correctly Macs are more then capable of reading and writing to an ipod formated on Windows. However you will have a much smoother experience if you formate it to work with your mac.
    Hope that helps,
    Weston

  • Plugged Ipod into Mac after using Windows--Now Corrupted Please Help

    Ipod 1.2.1
    My friend plugged it into his Mac, Ive been using it on my PC. It says its corrupted now when I plug it into the PC. I restore it and it says its restored but then the "do not disconnect" mac screen comes up (looks different than the do not disconnect pc screen), and when I try to restore it again, it wont recognize it. How can I fix this problem??

    Sorry, it is a bit confused
    Your iPod is a 3rd Generation (clickwheel) or (touch wheel),
    is it a dock connector?
    You need to do the Reset:-
    For clickwheel - Press select+menu keys
    For touch wheel - Press Play/Pause+Meny buttons
    until you see the apple logo
    If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer

Maybe you are looking for