No audio (and "no audio device") in WIndows XP on my MacBook Pro 17"
Greetings,
I just installed Windows XP SP2 on my new MacBook Pro 17" and everything is working smoothly EXCEPT that there's no sound in Windows from the built-in speakers, and in fact the Control Panel reads "No audio device." I have already successfully installed the Boot Camp drivers from my Leopard DVD. I also tried to run the Boot Camp 2.1 update (downloaded directly from the Apple site) but the installer cannot be run and gives error 2762, whatever that is. Finally, I've seen on some forum posts that certain Realtek drivers may fix similar problems on other machine, so I downloaded and installed Realtek R2.27 high definition audio driver but that doesn't seem to have done the trick for me.
I'm guessing this problem could be fixed easily by the correct audio driver but I can't figure out what that is or how to find it. Please help, any advice would be appreciated!
Model Name: MacBook Pro
Model Identifier: MacBookPro5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 8 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP52.008E.B05
SMC Version (system): 1.42f4
Serial Number (system): W8928*8YB
Hardware UUID: 095BBDAB-327A-5798-AF31-58FF2A88275B
Message was edited by: msb767676
I have the same problem, but when i run from the CD, I get the 2762 error, and from the download, it works fine but fixes nothing.
Similar Messages
-
I need to install windows on my new Macbook pro for running my flight simulator software
Hi!
I'm new to the Mac world and I need to install windows on my new Macbook pro for running my flight simulator software which only runs on windows. I would like to purchase and download the windows 8.1 rather than buying the CD.
When i go to the microsoft store and click windows 8.1 it says it is only for who has windows xp or vista...
can you tell me where and how can i purchase the full installation 8.1 for download?
i will keep the ISO file on my flash drive.
Thanks!
<Re-Titled By Host>it's likely an upgrade you are looking for and not a full install of windows
http://www.techrepublic.com/blog/windows-and-office/get-the-iso-you-need-to-crea te-your-own-windows-81-dvd/
if you get it as an iso file then you need to burn the iso file to a optical disc to install it -
Can i take both Receveing of audio and video on the same window.
hi,
i m using AVTransmit2 and AVReceive2 for Transmission and Receiving all is doing well but problem is that AVReceive2 show Transmission of audio and video in both different windows and it use different players for audio and video. Can u tell me can i merge both audio and video at the receiving end. i m already mergeing audio and video at transmission end ???. any one tell me how can i solve this problem ???
thx in advance.Hi,
I have the same situation - to use one window to show both rtp audio and video stream, but use the ControlPanelComponent of audio player to control both players.
I want to use the audio player as the master player so that the video player could be synchronized with it. So: audioPlayer.addController(videoPlayer).
In the only window frame for both players, I want to show the VisualComponent(VC) of video and the ControlPanelComponent(CC) of audio. So I add both components respectly to the window frame, after I got them from each player. Because the streams are coming from the network over RTP, and they do not become realized at the same time, I add the VC and CC of first realized player(no matter it is audio or video) to window frame at first, and then change them to the desired video VC and audio audio CC.
Though I check both player are realized and not started before I call the addController() method, the application stucked in this method. Of course I call it in a try block but no exception was thrown out.
when I use TimeBase to synchronize them, i.e., videoPlayer.setTimeBase(audioPlayer.getTimeBase()), everything goes fine. But, I can not control both players from one ControlPanelComponent in this way.
Anybody having any idea to solve this problem please reply.
By the way, in the example code such as AVReceiver, where audo and video streams are shown on two window seperately, user can use the ControlPanelComponent of audio to control both player, though it seems no relevant code to support that function. The ControlPanelComponent of video can not control the audio player anyway. Anyone having any explanation to this? -
In the past when I have imported my dslr video/audio files and then my zoom audio files Final Cut Pro has organized them in pairs in my library. For some reason my video/audio and my audio are being organized seperately. How do I fix this? Thanks!
Thank you Russ! Seems as though the timestamp on my audio files was completely incorrect so it placed the files far away from the corresponding video. I've modified the timestamp information and this has helped. The hour/minute information is incorrect but at least now I'm in the ballpark. Thank you!
-
I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I am using windows 7 professional install disc. I can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?
Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer. -
How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
-I have a flashdrive with win7 on it.
-I mounted the ISO of win7 with toast for bootcamp to do its thing.Good luck.
Consider this a bump so that hopefully someone with better news spots your thread.
Allan -
I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem
i try to download now, do you think when i download and install the windows support software, can i fix the problem?
-
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp -
I have just transferred my iTunes library from a hard drive previously connected to a windows laptop to a MacBook Pro and now all my options for editing info are greyed out. I have seen the answers if still using windows but could find a similar situation to this one.
Eels290776 wrote:
if my external hard drive is not connected to either of my machines, and I download something onto my iMac and then something different onto my Macbook, where are my machines going to be storing the new downloaded media
when the drive is not connected, +iTunes media folder location+ will default back to <MacintoshHD>/users/<yourname>/music/iTunes/iTunes music (or media)
and when I next connect the external hard drive how will I easily get the newly downloaded media onto the external HD
you'd have to point +iTunes media folder location+ back to the external via preferences > advanced > iTunes media folder location, then file > library, organize library > consolidate files
and essentially, to have it easily readable on both machines?
in that case it might be best to copy the entire iTunes folder to the external. then, on each machine, launch iTunes while pressing option on your keyboard. when prompted, click on +choose library+ and navigate to the iTunes folder on the external.
note only one iTunes can access the iTunes library @ a time !
also, make sure the external is mounted on either machine before launching iTunes.
JGG -
When I install Windows 8 on my MacBook Pro(13-inch,Early2011),the Super DVD Drive doesn't appear in Windows 8 and installing Boot Camp 5 drivers doesn't solve my problem,what can I do?
Go into your system preferences and click the startup disk icon then select your Mac HD.
-
I tried to install windows 7 in my macbook pro late 2011 but i tried to create partions after it installed and it turn to dynamic disks and i can't access mac or win 7 what should I do i cant format it because i dont have a backup
It's not that you can't format it because you have no backup, it's because you'll lose everything when you do. Lesson learned. Always have a backup.
-
I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.
OS X can natively read NTFS of Windows, but not write to it.
Windows can't read or write to HFS+ of OSX, and that's a good thing from a security standpoint.
Ideally if you share files between operating systems you should have a FAT/MSDOS formated USB key or hard drive. (exFAT external drive if any of your files are over 4GB in size) both these formats are universal for OS X or Windows.
If you install software into Windows and OS X to read each others formats, then you have to pay to update/upgrade it deal with headaches.
If you swtich between Windows and OS X a lot, don't need full hardware performance for Windows, you may consider installing virtual machine software like VMFusion or Parallels which can take a copy of your Windows in Bootcamp and place it into OS X as a file then run that copy of Windows in a window in OS X like so.
Advantage here is you run most of your light weight Windows programs like this at the same time as OS X.
Benefit is you can run just about any Windows or Linux version and OSX server editions (not client versions)
Bootcamp only allows Windows 7, that's it now.
You'll also be interested in two fre pieces of software, Carbon Copy Cloner and Winclone on macupdate.com.
CCC clones OS X partition and Winclone clones the Bootcamp partition. Valuable for you.
Good Luck -
I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth
I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth, because when i click the wireless in settings there are no choices... but when i use the mac os, everything is fine, the wifi, the bluetooth everything is functional, can you help me fix this problem? help will be much appreaciated.. thanks
How did you install Windows? Did you use Bootcamp Assistant or did you use a virtual machine like Parallels, Fusion, or VirtualBox.
If you used Bootcamp Assistant, did you download and install the Windows Support software (drivers) in accordance with the Bootcamp instructions? -
i Installed windows 7 on my macbook pro 13 inch Late 2011 with bootcamp, i have no wireless icon or bootcamp icon, i checked my flash drive and it is blank!! what do i do?
Download and intall the Windows Support software. You can start Bootcamp Assistant again and only select the option to download the support software. Then follow the instructions to save and install the support software.
Or, manually download the support software here http://www.apple.com/support/bootcamp/downloads/. -
I'm planning to use my macbook pro to record music, but some of the programs I will be using are only compatible with Windows. I was told that it was possible to install & run windows XP onto my macbook pro by using Bootcamp. I just don't know how fullproof or problematic this might be, or if it has even been successfully attempted yet. Please help!
Thx, KYou can use XP with 10.7.x by installing XP when the Mac is operating from OS X 10.6.8. It can then be up graded to 10.7.x. Below I have reproduced the "Hatter " method instructions that I have used successfully. If your MBP cannot boot from and install 10.6.8 then it is a no go situation.
Upgrade 10.6.8 to 10.7 or 10.8
Use a maintenance utility like Yasu or Cocktail to prepare existing internal Mac OSX HDD.
Clone the internal Mac partition to an external HDD with SuperDuper or Carbon Copy Cloner.
Restart from the cloned external HDD and select it as the startup volume via System Preferences / Startup Disk.
Install 10.7 or 10.8 on the cloned external HDD replacing 10.6.8 or 10.7.x.
Install 10.7.x or 10.8.x updates on the external HDD
Restart the updated 10.7.x or 10.8.x external HDD and test and adjust the preferences if needed.
When satisfied, clone only the 10.7.x or 10.8.x external HDD back to the existing internal Mac HDD replacing 10.6.8 or 10.7.x but don't include the recovery partition.
The Boot Camp partition will not be altered as to drive id which appeared to cause problems for a few people.
The recovery partition will be on the ext HDD and can be used for trouble shooting. A more convenient way to have the recovery/reinstallation environment is to create a Lion install USB thumb drive.
Maybe you are looking for
-
After upgrading to Photos, how can I work on a Book Project from another apple device?
After upgrading to Photos, how can I work on a Book Project from another apple device?
-
I am trying to use old style figures for a school typology project. I can't find them. I think I might need a specific font, but I dont know what that would be.
-
Essbase 11.1.2 Connectivity issue
I successfully completed the installation of EPM 11.1.2 in a distributed environment: Server A: Foundation Services, Reporting and Analysis, Workspace. Server B: Essbase Server and Essbase Studio Server I added the external MSAD authentication direct
-
I have a materialized view with 2 columns, Now I want to add two more columns to that MVIEW. Is there any way to add those two columns without droping the existed materialized view. CREATE MATERIALIZED VIEW MDT.MASTER_MV BUILD IMMEDIATE REFRESH COMPL
-
Kodo 3.3.3, InverseManager, 1:1 Relation
Hi, I am evaluating Kodo at the moment and have a problem with the inverse manager. I have a class 'BaseClassPC' which has a reference to a class 'ReferencedClassPC'. It is a simple 1:1 bidirectional relation, so in the table for class 'BaseclassPC'