No Audio and White screen for mpeg layer 3 Avi files

I reinstalled OSX on my macbook which previously played all avi files with no difficulties. Now I am having difficulties playing Avi files with quicktime PRO that use the Mpeg layer 3 codec. I have done the following with no success: downloaded flip 4 mac, divx, xvid, 3ivx, Xvid codecs, changed MIME settings, and deleted and reinstalled.
Depending on the specific version and sometimes the ordering in which they were installed, you may have created a conflict among the components here. While most current VidX components should be able to play MPEG Layer-3 audio, v5.1.1 is the only free VidX codec that is bi-directional. If that is not a problem, then I would recommend you remove (or "hide") all components in the main "Library > QuickTime" folder. Next I would determine if one (or more) of the AVI associated components can actually play the specific files mentioned on their own. You do this by installing a compenent to be tested, opening the player with one of the problem movies, and checking for correct audio and video playback. Log your results, close the player, remove the tested component, and move on to the next component to be tested. Once you deterime which component(s) may function correctly, I would then move on to determine which specific components are in conflict by repeating the tests but leaving the components installed after each test. In this case start with a component that is known to work and is the one you most desire to use (if more than one works). If the player stops working, then you have located a potential conflict. Set the offending component aside and continue testing until all components have been tested and are either installed or set aside. The last step is to simply evaluate component alternatives and configure you system for those files most often played. In my case the VidX v6 Pro components did not seem to get along with the 3ivX D4 v4.5 and/or Casio AVI and/or XVIDDelegate component combination.

Similar Messages

No audio and white screen

Hi Everyone,
I have searched the forums and have found similar problems
but no resolutions.
I've created a module in Captivate 3 and used Articulate
Presenter for delivery. It has been working great for the last few
months. A few days ago, I started having this problem (so did
users).
At 8m38s in the module, there are 2 buttons that popup and
give the option to go back to the table of contents or go to the
next slide. There is a 4 second delay (while the narrator finishes
talking) before the slide pauses and wait for a click. If I click
Next before the 4 second delay ends, everything work great. If I
click Next when the slide has paused, it jumps to the next slide,
but with no audio. The slide displays what it is supposed to (even
closed captioning works) and then fades to white and freezes (even
though there are 3 slides left in the module.
Has anyone else had this problem or know a solution? Any
feedback would be greatly appreciated. Thanks all!
Regards,
Cory

I reinstalled OSX on my macbook which previously played all avi files with no difficulties. Now I am having difficulties playing Avi files with quicktime PRO that use the Mpeg layer 3 codec. I have done the following with no success: downloaded flip 4 mac, divx, xvid, 3ivx, Xvid codecs, changed MIME settings, and deleted and reinstalled.
Depending on the specific version and sometimes the ordering in which they were installed, you may have created a conflict among the components here. While most current VidX components should be able to play MPEG Layer-3 audio, v5.1.1 is the only free VidX codec that is bi-directional. If that is not a problem, then I would recommend you remove (or "hide") all components in the main "Library > QuickTime" folder. Next I would determine if one (or more) of the AVI associated components can actually play the specific files mentioned on their own. You do this by installing a compenent to be tested, opening the player with one of the problem movies, and checking for correct audio and video playback. Log your results, close the player, remove the tested component, and move on to the next component to be tested. Once you deterime which component(s) may function correctly, I would then move on to determine which specific components are in conflict by repeating the tests but leaving the components installed after each test. In this case start with a component that is known to work and is the one you most desire to use (if more than one works). If the player stops working, then you have located a potential conflict. Set the offending component aside and continue testing until all components have been tested and are either installed or set aside. The last step is to simply evaluate component alternatives and configure you system for those files most often played. In my case the VidX v6 Pro components did not seem to get along with the 3ivX D4 v4.5 and/or Casio AVI and/or XVIDDelegate component combination.

Audio and video out of sync on converted AVI file

I am trying to convert a DVD to an AVI for playback on a device. When I import the DVD and publish it as an .AVI the output audio and video are out of sync. After about an hour of playback the audio lags the video by a full second. How can I correct this problem?

Walter0325
If you have Premiere Elements 12 on Windows 8 and you want to rip VOBs from the DVD-VIDEO to export subsequently to DV AVI, here are the details....
1. Do you have DVD-VIDEO standard or widescreen? Set the Premiere Elements 12 project preset manually.
File Menu/New/Project. Set the project preset to NTSC or PAL DV Standard or NTSC or PAL DV Widescreen depending on what you have.
Before you exit the new project dialog, make sure that you have a check mark next to Force Selected Project Setting on this Project.
2. In the Premiere Elements workspace, use Add Media/DVD camera or computer drive/Video Importer to get the VOBs (only the ones in the series VTS_01_1.VOB. Set to a folder in the Save In: location. Check mark next to Insert in Timeline. Hit Get Media.
3. If you have an orange line OVER the Timeline content, press the Enter key to get the best possible preview of what you have on that Timeline.
If after all that, the audio is out of sync, then use the Command Prompt method to get the individual VOBs into a single file with all the VOBs seamlessly merged. This worked nicely for a recent user here. See details in my blog post how to for the Command Prompt way.
http://www.atr935.blogspot.com/2013/09/pe-dvd-videoseamless-vob-ripping.html
Please do not hesitate to ask if you need clarification on anything that I have written.
Depending on your results, more information may be requested about the specific properties of what you have on that DVD disc.
Thank you.
ATR

Email not opening This is a sudden thing, Email had been working fine for two months then today would not stay open now it will not open at all. after trying to open mail I receive a white screen for a nano second and the app closes

Email not opening on my iPad2 This is a sudden thing, email had been working fine since purchasing the device then today would not stay open, now it will not open at all. After trying to open mail I receive a white screen for a nano second and the app closes.

Have you tried closing the Mail app completely ? From the home screen (i.e. not with Mail 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Iphone 3gs shows white screen for a second and reboots.

While I play games, watch videos or do anything, the iphone displays a totally white screen for less than a second and then it reboots. After this it starts normally and then this all happens again after about 10-20 mins.
Plz give me any suggestions to fix it. What is the problem? any hardware prob??

Hello, noyz23il.
I would agree that this is a unique issue. I have attached an article that goes over basic troubleshooting that may help. In this article, see the sections referring to display, camera and blank white screen. If this does not resolve the issue, please see the last section regarding "issue not resolved".
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Cheers,
Jason H.

Black and White Screen

My Iphone 4 has been shutting down to a black dos like screen with White letters.
Debugger messag: panic\
OS Version: not yet set
Kernel Version: Darwin Kernel Version 13.0 Sunday August 19
I b
boot version: i Bott-1537.4.18
panic: we are hanging here...
This has been going on since I've tried to upgrade OS6. It would go to this black screen but eventually come back on with a drained battery.
ITunes error showed to restore phone back to factory settings so I did but it only worked for 4 days. Now it's been down for at least 15 hours.
Any one see this issue before?

Thank you. There is not an apple store near by. I need my phone for work. My warranty has expired and 13 month into contract is too early for the 18 month early upgrade. I reset the device and plugged it in to Itunes and restored it again. The part that confuses me and perhaps why i didn't work last time is...Restore to new phone or Restore to my iphone back up so I always choose my phone but perhaps this doesn't bring it back to factory settings. I just don't want to loose my contacts. It is working now but it's probably just a matter of time before it the black and white screen come back up. I think it;s a system update issue. I'm going to call Apple.

Yosemite my iMac stuck on white screen for 18 hours so far

DDownloading Yosemite the software has, I believe, downloaded I have progressed but have now been stuck on white screen for 18 hours. I have my mouse arrow working but nothing to point at. Please how may I tell if anything happening?

Start your computer with the original DVD that came with system and repair your disk with disk utility, also repair permissions. http://support.apple.com/kb/TS1417

IMac 27" 3.06ghz white screen for 40 seconds on start up before grey apple

when i start up my iMac 27" 3.06GHZ i get a white screen for 40 seconds before the grey apple appears and it boots up.
If anyone else is experiencing this or has a solution it would be great if you could reply.
Cheers.

Hi guys,
I'm new to the forum, i have recently bought a new imac 27" i7, i don't have any problems with white screens when starting up, the imac runs great, however when i try playing any games thats when the problems start. i installed X-plane it first worked without any problems but not in full resolution, i upgraded the resolution to the maximum imac resolution and from that moment every time i start the game the screen turns white you can hear the imac starting the game and even for a while sound appears, but then after 30 seconds the programs fails and you get a typical apple message.
i have also tried installing need for speed, here i didn't change anything to the graphics however the problem occurred straight away. white screen then the sound of the games menu and crash. did anyone else have this problem? is there a solution to this? i would like to apologize if this matter has been discussed in earlier forums. However i hope there is someone whom is able to give me a helping hand here. Whats wrong???? thanks ruben

I have a white screen for imessage. Everything else works but I can't do anything on imessage.

I have a white screen for imessage. Everything else works but I can't do anything with imessage. How can I fix this?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Messages>Send and Receive and sign out and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Convert photo to black and white excpet for reds

I have a photo and I would like to convert it to black and white except for the reds in the image. Is there a way of selecting a color range to be preserved and to convert the rest to black and white?
thanks

The problem is that the reds arnt just in one area.
Is there no way to select a color range?
I guess I could use the magic wand tool and set it off continuous while varying the tolerance, but this seems a but crude.

Exporting audio and video together for Mpeg2 dvd

Hi, I'm trying to export audio and video together for Mpeg2 dvd.. I changed multiplexing to DVD but is still exporting seperately is there something im missing? thanksa

To add, with Multiplexing set to NONE, check what the Audio format is set to. If "PCM", this is an uncompressed .wav file and will result in export of .m2v video and .wav audio (I think Mac uses .aif) and use "Import as Timeline" in Encore for both clips at once. Encore will automatically transcode the audio to Dolby AC-3, do NOT mess with settings in Encore, defaults are correct. If you have CS6, then in AME audio settings, there is an option for Dolby and you can use that to create the .ac3 audio and then Encore does NOT do any transcoding to audio or video. Note that older versions will also show "Dolby" but that is a free trial of a surround encoder, not the same. You just want the stereo option available in CS6, or use PCM option is fine
Thanks
Jeff Pulera
Safe Harbor Computers

I hired a commercial artist to create a color image for the cover of a self published book. I want a black and white image for the inside. The commercial artist has not responded to this request. How do I determine the format of the color image, I'm guess

I hired a commercial artist to create a color image for the cover of a self published book. I want a black and white image for the inside. The commercial artist has not responded to this request. How do I determine the format of the color image, I'm guessing it's Illustrator's formatting but I don't know. How can I find out if Illustrator will open the file and allow alterations? The image opens only in Apple's Pages software?

rons,
It seems that all you have is a raster image, presumable PNG24 or JPEG, in RGB.
It may have been created as raster artwork in Photoshop, or it may have been created as vector artwork with the help of Illy, or as a mixture of vector and raster artwork in either application, or both combined.
If you just need to have a raster representation in black and white based on the current colour image, you may try this, in a new RGB document (View>Smart Guides are your friends):
1) File>Place the image (you may tick Link or untick and have it embedded);
2) Create a rectangle with black fill (R = G = B = 0), at least as large as the image, and place it behind the image (you may ClickDrag with the Rectangle Tool between opposite corners, then Ctrl/Cmd+X+B);
3) Select all and in the Transparnecy palette flyout click Make Opacity Mask with both Clip and Invert Mask ticked.

How do your turn off the "black and White" setting for the visually impaired?

How do you turn off the "black and White" setting for the visually impaired? Also known as the "tripple Click"

Settings>General>Accessibilty>White on black--> Off

Freezing, Restarting And White Screen

*Freezing, Restarting And White Screen:*
All these things happen at any time what
ever I do. I've restored my a million times
and nothing seems to work.
SPECS:
2nd Generation
iPod Touch
OS 4.1
Please Help ):

Welcome to the discussions,
did you already delete the ipsw software file on your computer to make iTunes download a new copy from the Apple server to restore your firmware from?
Also try to restore without using the existing backup, it might contain damaged files causing the behavior of your ipod.
iwps files are stored here:
XP: C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPod Software Updates
7 and Vista: C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPod Software Updates

When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?

When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?

When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?
You have two basic options. One is to use a commercial screen recording app with access to system audio built into the app and the other is to add a system extension like SoundFlower that allows the QT X screen recorder to access/record the system audio. I use the former so I am not that familiar with SoundFlower but there should be several posts to this forum covering this topic.

No Audio and White screen for mpeg layer 3 Avi files

Similar Messages

Maybe you are looking for