No Audio & Browser Error

I've noticed 2 things so far that I don't like about the z10
1. a) When I connect the device to my in car bluetooth, the phone disconnects sometimes when I answer a call.
b) After I disconnect bluetooth, I don't get any audio from my device unless I restart.
2. yesterday while browsing, all of a sudden i was getting errors on webpages saying that I don't have cookies enabled. I confirmed in the settings that I did. This was fixed by doing a battery pull which I hope is not a regular fix for problems with the z10 (I miss quickpull)

Hello kmascoll,
To better assist you with this, are you using a built in Bluetooth car kit? If yes, what model car and year?
And to address your 2nd issue, can you provide an example of some of the websites you are having trouble accessing and the full error message you receive?
Thank you.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

Browser error on APEX Login Page

Good morning,
Version Information:
- APEX 3.1.1
- Database 11.1.0.6.0
- Application Server: 10.1.3
I'm using the APACHE install on my APP server to connect to APEX.
When I connect to the APEX_ADMIN login page, after filling in the blanks, I get a browser error message, not an APEX error. The "caution" icon pops up on the status bar at the bottom of the browser window. When I look at the message, it says:
Line: 34
Char: 1
Error: Object expected
Code: 0
URL: http://<myservername>:7778/pls/apex/f?p=4550:10:7817059686490562
That URL, of course is the login page.
When I checked the status, the install completed successfully. I am listening on port 7778 mainly because those that came before me configured the app server's http.conf with 7778.
What am I missing?
Thanks,
Don.

Thank you for your responses,
Yes, I'm pretty sure that my image alias is correct (see my DADS.CONF listing below).
I am NOT upgrading from 3.0, this is a new, clean install. I'm still checking other possible causes. Not sure where to go next.
# ============================================================================ # mod_plsql DAD Configuration File # ============================================================================ # 1. Please refer to dads.README for a description of this file # ============================================================================ # Note: This file should typically be included in your plsql.conf file with # the "include" directive. # Hint: You can look at some sample DADs in the dads.README file # ============================================================================
Alias /i/ "D:\oracle\AppServ\Apache\Apache\images/"
AddType text/xml xbl
AddType text/x-component htc
<Location /pls/apex>
Order deny,allow
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlDocumentPath docs
PlsqlDatabaseConnectString <myservername>:portno:<servicename> ServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername APEX_PUBLIC_USER
PlsqlDefaultPage apex
PlsqlDatabasePassword <apexpassword>
PlsqlRequestValidationFunction wwv_flow_epg_include_modules.authorize
Allow from all
</Location>

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with "server not responding" Can somebody give me a solution for this ?

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser. I have tried restore option also. This is happening with both Wlan and Data con. too
Please help...

I do not really know much about this kind of problem, but i may be your internet connection.
If you are on your own #G network then:
Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
Then wait patiently until you get a good connection and then try again.
If you are on a nearby Wi-Fi connection then:
Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
If all else fails, then you need to contact your provider for assistance.
Sprint:888-211-4727
AT&T:?
Verizon:?

WPC - Browser error while assigning iviews

Hello All,
I am creating webpage in portal web page composer and assign my customized layout to that. But I am facing problem (browser error) while I am assigning iViews(KM Navigation) to that page.
Thank You
Devasarathy Pandi

No Response

U530 Touch - Audio DRIVER ERROR - This device cannot start (Code 10) - Windows 7

U530 - High definition audio device - ERROR - This device cannot start (Code 10) Windows 7, please see the picture
Picture link (hosted on photobucket.com)
I got all drivers up to date including the BIOS, everything is working fine (the sound works, microphone works...) but this error is kind of annoying to my eyes so if anyone know how to fix it please help.
I tried to uninstall this and let windows update install it again => not worked, same problem.
I tried to re-install the Realtek driver (uninstall - restart machine - install - restart machine) => same problem
And another probelm which has not been solved yet is the Bluetooth icon keep blinking on battery mode (windows 7), you can see more in this thread

What kind of reinmstall did you perform? If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed. Your list will be different than the following one, but this is only an example.

Adobe Reader 9 is not opening same files in Browser "Error in this Page"

Adobe Reader 9 is not opening same files in Browser "Error in this Page"
If I try to open this pdf file manually then its works.
The Error comes if I try to open Big Files or some else Files in the Browser.
This Error was not comming with Adobe 8.

To uninstall Adobe Reader, make sure (using Task Manager's Processes tab) that Adobe Reader is not running. Browser windows should also be closed.
If you still cannot proceed, try in Safe Mode, or use the Windows Installer CleanUp Utility.
P.S. Adobe AIR and Acrobat.com are not directly related to Adobe Reader, and can be uninstalled independently.

OWA encountered web browsing error in IE 8?????

Hi all,
i am using windows 7 32 bit OS IE 8 today when i was sign in to my account it display a message "OWA has encounter a web browsing error" i rest my IE setting restart but no effect then i run S/MIME
update and then check again but no effect now please help out.
Thanks and Regards
Naveed Ali Sahil

Hello,
Please create a new thread to IE forum via:
http://social.technet.microsoft.com/Forums/en/ieitprocurrentver/threads
Thanks,
Simon

HpPavilion dv6 notebook PC.beats audio High definition audio CODEC error(52)

Hi can anyone help me please?
I have a audio problem so you will need to talk loud! lol. Volume on mute.
HP Pavilion dv6 notebook PC.
B3K20PA#ABG
windows 7
stwrt64.sys version 6.10.6418.0
High Definition audio CODEC error (52)
Thanks
This question was solved.
View Solution.

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp56001-56500/sp56429.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook.
Let Windows fully load - it will automatically load an audio driver, but just let it complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

"NI Network Browser Error!" When Using 'DataSocket Select URL'

We have two LV 7.1.1-built executables running on two different computers that are networked together. Each executable starts the DataSocket Server on their own computer and then attempts to read from the other computer's DataSocket Server. Everthing works well if both computers are running XP SP2 or SP3.
The problem occurs when one of the OS's is Windows 2000 SP3. The executable on the XP computer can see the DataSocket items in the 'DataSocket Select URL' window on the Windows 2000 computer. However, on the Windows 2000 computer, if you open the 'DataSocket Select URL' window, and try to browse the DataSocket items on the XP computer, one of the following dialogs appears:
NI Network Browser Error!
Cannot enumerate items in this hierarchy
Cannot open a network enumeration
0x000004b8
An extended error has ocurred.
OR
NI Network Browser Error!
Cannot enumerate items in this heirarchy
Cannot open a network enumeration
0x00000035
The volume path was not found
This is usually followed by a DataSocket Read error of 214701483 (this looks like a COM object error, but for once, Google didn't have anything to say about it).
There was a similar post to this one in which Manuel Wielander suggests setting the 'Authentication Level' to 'Connect' and the 'Impersonation Level' to 'Identify'. He also suggested adding 'ole.AuthnLevel=1' to the executable's ini file. None of these suggestions work. I have also added every exception imaginable to the Windows XP firewall with no luck.
Anyone dare to step into the networking abyss with me on this one? Much thanks in advance for any help or suggestions.
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect

Hello Archimedes,
This problem is a bit difficult to track down. I have Win 2k SP4 and WinXP Pro computers and am unable to reproduce the issue at the moment. However, I have found information that this issue has occurred in the past. In some instances it appears that changing the DataSocket Select URL.vi's Preferred Execution System to something other than "user interface" (eg. "Same as caller" or "standard") from VI Properties>>Execution resolves the problem. However, this is not a guaranteed workaround. R&D is aware of the problem and is working to fix it. I apologize for any inconvenience.
Best Regards,
Chris J
National Instruments

Google Sheets: A browser error has occurred. Please hold the Shift key and click the Refresh button to try again.

Since upgrading to OSX Yosemite last night, I get this error message when I open spreadsheets previously created in Google Drive: "A browser error has occurred. Please hold the Shift key and click the Refresh button to try again." Following these instructions does absolutely nothing.
Word google docs open fine, as do spreadsheets that aggregate responses from a form and a select few spreadsheets; however most other spreadsheets display the same error message.
I've tried:
opening in Google Chrome - uninstalling and reinstalling Google Chrome: same issue
opening in Firefox: same issue
opening from sheets.google.com: same issue

moving tab doesn't work.

The "alsa audio output error: cannot write: Broken pipe" problem

[Solved]
(No place for this word in the Subject field, so I put it here.)
Hi Arch community!
I noticed I have this problem and not sure when in started. Several months ago I bought and installed new videocard "GeForce GT 630". Right after installation I lost sound in the system. Having internal sound card (in mainboard) and SB Audigy2 (PCI), I searched for solution and found I had to disable "snd_hda_intel" module to restore sound to work through PCI sound card. Did it.
echo "blacklist snd_hda_intel" >> /etc/modprobe.d/no-nvidia-sound.conf
After that sound was working as it should. And I noticed recently that during playing of any sound file the sound interrupts. If run VLC from CLI I get "alsa audio output error: cannot write: Broken pipe" message. And my system hasn't been upgraded since I don't know when. I still ran Firefox 26. So googled again and found it's a bug in a kernel or somewhere else.
==========================================
https://bugs.freedesktop.org/show_bug.cgi?id=69942 :
2013-10-01 01:39:40 UTC
I ran a system update last night, and this issue appears to have been corrected.
==========================================
And so I thought upgrade would fix my problem since mainstream bug is fixed. After upgrade sound interrupts again, maybe even more often.
Do you guys have this issue and does anyone have a solution?
Last edited by Mr. Alex (2014-06-26 18:55:59)

Not particularly wise to blacklist the module, since it probably is also used by the integrated sound card. With vid and pid you could just disable the nvidia card alone using parameter enable=0. Unless you do not mind having both disabled.
Where do I need to input "enable=0"? When I was searching for solution to make my Creative card work with new nVidia card I installed, the only way I found was blacklisting the module.
dmesg says:
[ 20.448086] nvidia 0000:02:00.0: irq 42 for MSI/MSI-X
[ 21.112331] NVRM: Your system is not currently configured to drive a VGA console
[ 21.112340] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 21.112345] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 21.112349] NVRM: drivers including, but not limited to, vesafb, may result in
[ 21.112352] NVRM: corruption and stability problems, and is not supported.
Then:
lsmod | grep 'snd'
snd_ca0106 36242 0
snd_ac97_codec 114896 1 snd_ca0106
ac97_bus 1270 1 snd_ac97_codec
snd_rawmidi 20278 1 snd_ca0106
snd_seq_device 5244 1 snd_rawmidi
snd_pcm 83207 2 snd_ac97_codec,snd_ca0106
snd_timer 19294 1 snd_pcm
snd 60780 6 snd_ac97_codec,snd_timer,snd_pcm,snd_rawmidi,snd_seq_device,snd_ca0106
soundcore 5551 1 snd
I guess my card is "snd_ca0106". If yes,
# systool -v -m snd_ca0106
Module = "snd_ca0106"
Attributes:
coresize = "36242"
initsize = "0"
initstate = "live"
refcnt = "0"
taint = ""
uevent = <store method only>
Parameters:
enable = "Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y"
id = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
index = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
subsystem = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
Sections:
.bss = "0xffffffffa0814780"
.data = "0xffffffffa0813300"
.exit.text = "0xffffffffa0811a1e"
.gnu.linkonce.this_module= "0xffffffffa0814500"
.init.text = "0xffffffffa0817000"
.note.gnu.build-id = "0xffffffffa0811a30"
.rodata = "0xffffffffa0811a80"
.rodata.str1.1 = "0xffffffffa08123dc"
.rodata.str1.8 = "0xffffffffa0812130"
.strtab = "0xffffffffa0818c10"
.symtab = "0xffffffffa0817020"
.text = "0xffffffffa080d000"
__mcount_loc = "0xffffffffa0812f98"
__param = "0xffffffffa0812f18"
__verbose = "0xffffffffa0814460"
Where would I look for "max_buffer_size" parameter?

Browser Error Message from Forms when Published

I am using JotForms in my site and when published the forms generate the following browser error: MuseJSAssert:Error calling selector function. Object doesn't support this property or function.

Hello,
Are you able to see the error when you preview it in a Browser or when you export the site as HTML on your local machine or is it after the upload?
Did you try deleting and reinserting the code from Jotforms into Muse?
Could you please provide us URL of the site where we can check the issue?
Regards,
Sachin

BAM - Acrive Studio - Browser Error in filter

In Acrive Studio (BAM 11g) I must create a graphic on specific value of BI
But when I click on "filter" I have an browser error and I show blank area.
The error is :
Messaggio: Previsto ';'
Linea: 50
Carattere: 85
Codice: 0
URI: http://atenei02.private.cineca.it:7052/OracleBAM/8533/activestudio/default.jsp
Messaggio: 'g_strFilterNodeName' non è definito
Linea: 61
Carattere: 2
Codice: 0
URI: http://atenei02.private.cineca.it:7052/OracleBAM/8533/shared/scripts/filtereditor/Filter.htc
Someone can help me ...
Thanks
Elena

Hi Luciano,
I explain you
In BAM --> Active Studio --> Create new report --> select data object (setp 1) --> select data object fields ( step2)
--> Other function ( step 3) --> create filter.
Now , when I select "create filter" in the bottom bar of the browser show a warning simbol (!) and read "End". If I see the detail of the warning :
Dettagli errore pagina Web
Messaggio: Previsto ';'
Linea: 50
Carattere: 85
Codice: 0
URI: http://<server_url>/OracleBAM/8533/activestudio/default.jsp
Messaggio: 'g_strFilterNodeName' non è definito
Linea: 61
Carattere: 2
Codice: 0
URI: http://<server_url>/OracleBAM/8533/shared/scripts/filtereditor/Filter.htc
I can not select any option, I just delete and start over.
In this way, I can not define the filters for graphics
Thanks
Elena
P.S: Sorry for the late reply

Outlook web browsing error occured

Greetings
I am using the page view web part template under the media and content folder to create a web part to that allowed SP users to view and edit an Exchange 2007 public folder. I am able to view the Public Folder
calendar, however when I browse or change views I can an Outlook web browsing error. Here are the details.
Client Information
User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/7.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; InfoPath.3)
CPU Class: x86
Platform: Win32
System Language: en-US
User Language: en-US
CookieEnabled: true
Mime Types:
Exception Details
Date: Tue Apr 22 17:20:02 PDT 2014
Message: Access is denied.
Url: https://owa.domain/owa/8.3.342.1/scripts/premium/cdayvw.js
Line: 30
Call Stack
Dump Event
recordset = null
type = error
fromElement = null
toElement = null
altLeft = false
keyCode = 0
repeat = false
reason = 0
data =
behaviorCookie = 0
source = null
contentOverflow = false
behaviorPart = 0
url =
dataTransfer = null
ctrlKey = false
shiftLeft = false
dataFld =
returnValue = undefined
qualifier =
wheelDelta = 0
bookmarks = null
actionURL =
button = 0
srcFilter = null
nextPage =
cancelBubble = false
x = 0
y = 0
buttonID = 0
srcElement = null
screenX = 218
screenY = 409
srcUrn =
origin =
boundElements = [object]
clientX = 43
clientY = 70
propertyName =
shiftKey = false
ctrlLeft = false
offsetX = 0
offsetY = 0
altKey = false
errorMessage = Access is denied.
errorUrl =
https://owa.domian/owa/8.3.342.1/scripts/premium/cdayvw.js
errorLine = 30
errorCharacter = 64
errorCode = 0
The Share Point server is running SP 2010 SP2 and the Exchange server is EX 2007 SP 3 I am not sure what roll up. it looks like their is a permissions issue. But could it be permissions with in SP or EX? You help is greatly appreciated.
Thanks in advance!

Hi ,
Towards the public folder permission issue, there are two permissions included, one is for the server side permission; the other one is for the client side permission.
There are some links for your reference:
Title: Managing Public Folders
URL: http://technet.microsoft.com/en-us/library/bb124411.aspx
Title: Outlook folder permissions
URL: http://office.microsoft.com/en-us/outlook-help/outlook-folder-permissions-HP005242287.aspx
To use Outlook Web App Web Parts, you must, at a minimum, be delegated "Reviewer" access to the content that you're opening. If you've embedded an Outlook Web App Web Part that requires authentication into
an application, you must pass authentication information through together with the request for the Web Part.
For more information, you can refer to the article:
http://office.microsoft.com/en-in/sharepoint-foundation-help/working-with-outlook-web-access-web-parts-HA101810215.aspx#_Toc296081842
http://technet.microsoft.com/en-us/library/bb232199.aspx
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

No Audio & Browser Error

Similar Messages

Maybe you are looking for