No audio device in Encore CS3 - PPro works fine...???

I can't get any audio out of Encore CS3 - when I go to Edit/Preferences/Audio/Audio Output device it says "No Audio Device" under the device name. But Premiere Pro CS3 works fine with the driver for my sound hardware (via the ASIO driver for my RME Fireface 800). All other Windows apps work fine with the audio, as well (e.g. Quicktime, WMP, etc.). I'm using Win XP Pro w/ SP2.
How do I choose an audio output device in Encore?
Thanks,
rgames

Hi Neil,
I think I have the WDM drivers - the set I'm using is the latest that I see on the RME site (version 2.82 dated 12/6/07). When I check under the "About" tab in the Fireface settings it says "Windows MME, WDM, GSIF 2.0 and ASIO 2.0".
In Encore, all the inputs show up. But the only option under outputs is "No Audio Device".
Thanks,
rgames

Similar Messages

  • I'm trying to multi-track using an m-audio device, I can record my guitar fine. However, I want to create a new track so I can record an acoustic tambourine over the top. Instead it records the original guitar as well as tambourine? its really annoying

    I'm trying to multi-track using an m-audio device, I can record my guitar fine. However, I want to create a new track so I can record an acoustic tambourine over the top. Instead it records the original guitar as well as the tambourine coming out with a really distorted sound. I've managed to record over the top of a guitar before and add diferent riffs and sounds but I've tried all of the settings but its still not working. Basically I want to record different tracks without it recording my previous guitar riffs as well. Help would really be appreciated.

    Ah that was it, thanks a lot common sense really but thanks for the help

  • I'm having an intermittent problem with my midi controllers triggering Mainstage 3. I'm using a PreSonus Firebox audio interface. It's been working fine for months, but now when I first turn on the computer in the morning , I'm not able to trigger Ma

    I’m having an intermittent problem with my midi controllers triggering Mainstage 3.
    I’m using a PreSonus Firebox audio interface.
    It’s been working fine for months, but now when I first turn on the computer in the morning , I’m not able to trigger MainStage from the keyboard.  I tried different midi controllers, different keyboards, different midi cords, and check midi preferences.  The audio interface is working fine and is recogonized, but the midi doesn’twork.  I re-started the computer several times and then finally it miraculously starts working again.
      I’ve been having to this every day now.  Any help or ideas is very much appreciated.

    I Had the same problem with a FireStudio. Try unplugging the FireWire plug and the power plug. Wait for a few seconds, then plug both back in. The light on my FireStudio was flashing blue/red which means "not connecting." I did what I just described, and everything works again. Hope it works for you.

  • Running win7 64bit no audio in Namoroka . Firefox 32bit works fine

    Running win7 64bit no audio in Namoroka . Firefox 32bit works fine with audio also Internet explore32bit work Ok but not 64bit

    I don't think there was any setting I could change on the driver. Firefox did not show up in the mixer or volume control. It is there with the native win 7 driver. This driver doesn't seem to see Firefox. I just got this computer, but looking for help, posts three years ago on the web seemed to have this problem with the Dell e6500 and Firefox.

  • I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync.  They work fine when played in Quicktime.

    Hello,
    I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync as soon as I load it into the program.  It appears to work fine in Quicktime.
    Thanks in advance.

    mbgoodwi
    Thanks for the reply. This is the plan.
    Open Premiere Elements 12/12.1 to the Expert workspace.
    In the Expert workspace, go to File Menu/New/Project and Change Settings.
    In the Change Settings area, select the project preset
    NTSC
    AVCHD
    AVCHD LITE 720p30
    OK out of there. In the New Project dialog that appears, note that it has your new project preset named.
    Be sure to put a check mark next to "Force Selected Project Setting on This Project". And, then OK out of there.
    Back in the Premiere Elements 12 Expert workspace, use Add Media/Files and Folders to bring your video
    into Project Assets. From Project Assets drag your video to the Timeline Video Track 1/Audio Track 1.
    Is there an orange line over the content in the Timeline. See screenshot for orange line to which I am referring.
    There should be no colored line over the content if the project preset matches the video properties. But, if you do see
    that orange line, then render the Timeline content by pressing the Enter key of the computer main keyboard or press
    the Render button above the Timeline.
    Do your video/audio now play back in the Edit area monitor in sync?
    Please let us know the result, and then we will decide what next.
    Thanks.
    ATR

  • Updated iphone4 to ios5 - get Device not supported for icloud - worked fine for other iphone4

    Updated iphone4 to ios5 - get "Device Not Supported" message - worked fine for other iphone4 & ipad.  Why is this iphone "not qualified for icloud"?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer.

  • Trancode burn hangs/crashes in Encore CS5 but works fine in CS4

    Hi,
    I've been reading lots of stuff in the threads about Encore CS5 crashing at various times, and I wanted to see if someone could shed some light on my circumstances..
    Windows 7, LG Blu-ray burner, everything always worked fine in CS4.
    I had been using Encore CS4 to burn my Premier CS5 projects because I couldn't ever get Encore CS5 to work prior to the latest update..
    I did a new project in CS5 and when I did a rough cut burn it worked ok..
    Since then, no joy.. It imports it from PP to Encore (CS5) and starts rolling, but then seems to freeze along the way in transcoding and crash. If I load the same project saved by Encore CS5 and try burning to blu-ray in CS4 it transcodes, burns and works.. So it does seem to be some difference between Encore CS4 and CS5. I really want CS5 to work for the promise of not needing to transcode AVCHD, and make it look worse
    Couple of things to note that may or may not matter:
    I read somewhere that "blank space in the timeline" crashes Encore CS5 .. I mean really? I have a couple of gaps of black in the timeline when I switch sections, but this never caused a problem before, and this seems like a bug that Adobe just couldn't have could they? For real?
    I have both CS4 and CS5 installed. Does this matter? I haven't uninstalled yet, because CS4 works, and CS5 doesn't.
    I have a GTX 295 (not the 285 and I did the "hack" to load and take advantage of the GPU's with the mercury engine). Everything in Premier CS5 seems to work fine, but admittedly, the one time I did get Encore CS5 to work, this was not in enabled and now it is.. Could this really matter?
    Right after I post this I'll be doing that roxio update thing, but I have a pretty fresh copy of Win 7, totally updated that I the only thing I do with it is use it for Premier, so the point is I don't have a bunch of junk installed and use to for all sorts of other stuff.
    I really want to fix this because I have noticed that after CS4 transcodes and I burn the blu-ray, it doesn't seem to look as good.. And since nearly all my footage is in AVCHD, and it wouldn't need to transcode it, this not only saves time, it probably looks better, so this would be a super powerful feature of Encore CS5 I really want to take advantage of..
    Any ideas?

    Thanks for the tips..
    I changed every file including the name of the project to have no spaces.. I also don't have any breaks in my sequence, I'm not using a timeline, I'm just importing the sequence straight into Encore...
    I don't think the GTX 295 thing could be related the only issues I'm having are in Encore, not Premier Pro..
    But I guess the news now is that everything seems to be working pretty well and it looks to be transcoding, but I keep getting a:
    "Blu-ray Object: Sequence 01/Cozumel_2010.prproj, Export file not found"
    The Sequence part is obviously the name of my project file..
    I've been trying to read about why this would come up, but no one seems to have an simple answer.. I've cleaned the media cache and renamed the project, but the old project name gets the same error..
    And here is the point, as stated before, I open the exact same Encore project in Encore CS4, and bingo everything works..
    D.J.

  • Combining Audio Devices: Input Channels don't work

    Hello,
    I combined 2 Audio Interfaces with 2 input channels and 2 output channels each with my default audio output using the Audio-MIDI-Setup.
    Now i realized that one input channel per interface disappeared, but thats all good, because these channels were dead anyways.
    But: When combining the devices to a new device the input channels just disappear.
    The Audio-MIDI-Setup lists 6 output channels an 0 input channels for the new device.
    When using the audio interfaces normally (without creating a new device) the input channels work perfectly, so there's no hardware error.
    Screenshot: http://img185.imageshack.us/img185/9531/bild4c.jpg
    I hope you can help me
    Hendrik
    Message was edited by: Hendrik1301
    Screenshot added

    Problem remains unsolved

  • My daughters iPod touch (4th gen and 4 months old) is not recognized by iTunes (PC) or our stereo docking station, but it will charge. Other devices (iPhone and another touch) work fine on PC and stereo. What is wrong??

    We have an iPod touch 4th generation (4 months old) that is charging on our PC but is not recognized by iTunes. It is also charging on the docking station of our stereo but is not recognized by the stereo (will not play music). Other devices (2 other iPod touches and an iPhone) are recognized by both the PC and the stereo. What could be wrong with this particular iPod touch??

    What are the model iPods and iPhone and iOSs that work?
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple l
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    The following may result in in the inability to regain full use of the iPod if iTunes does not see the iPod
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • TextArea and TextInput on mobile device the text disappears and works fine on desktop

    I'm developing a mobile app with a view that contains 1 Text Area, 1 Text Input and a group of 3 buttons. The app runs well in Desktop mode ( Run & Debug ), but when run in an android device ( Sony Tablet S) when the view is loaded,  the text (text property set at design or runtime)  "flashes" and disappear, if I change the device orientation of the tablet (phisically) the text draws correctly and don't disappear, even if you return to the original orientation. Also, if I pop-up a message (SkinnablePopUpContainer) in the same view, the text appears, and when I close the pop-up the text disappears again.
    Is this an identified bug ? ... is there a workaround ? ... I tried to set visible property to false and true and sometimes it works and sometimes not at random.
    Thank you for you help.

    UPDATE : if I set Focus=true the text appears. I think that the text should be there even if I don't set focus.
    This simple code when run in the device (Sony Tablet S) doesn't work as expected ... ( the text in the textbox dissapears, and if you change orientation appeears).
    <?xml version="1.0" encoding="utf-8"?>
    <s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
                        xmlns:s="library://ns.adobe.com/flex/spark" title="Editar acción"
                        xmlns:dao="dao.*" creationComplete="view1_creationCompleteHandler(event)" >
      <fx:Script>
                        <![CDATA[
                                  import mx.events.FlexEvent;
                                  protected function view1_creationCompleteHandler(event:FlexEvent):void
                                            txt1.text="Hola";
                                            txt1.validateNow();
                                            txt1.setFocus(); // <---- if not set the text "Hola" flashes and dissapear.
                        ]]>
      </fx:Script>
              <s:TextInput id="txt1" x="26" y="44"/>
    </s:View>

  • I have a new Macbook Pro.  When watching Youtube videos, it works perfectly until I attempt to watch the video in full screen.  When in full screen, the video freezes immediately and the audio continues.  When minimized it works fine as before. Help?

    I have a brand new Macbook model A1502.  I am taking online college classes that incorporate youtube tutorial videos.  I can watch the videos if I don't maximize the screen to full screen.  When in full screen, the video freezes immediately and the audio continues uninterrupted.  I can press escape and go back to the previous screen and the video continues to play with no problems.  Can anyone help me please?  This machine is literally just out of the box with maybe an hour of use.  Thanks in advance

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Campusmanager 3.1, unconnected devices are reachable and CDP works fine

    Hi,
    our customer has the following installation: CD-One 4th-edition on Win2000-Server.
    The campusmanager does not show all cat2950 wich are connected to cat 3550-12G with enhanced image. Each uplink to the 2950 is configured as "switchport mode access" and one (same) vlan is assigned on both side. I can see the cdp neighbors completely on both switches. But it is impossible to integrate the 2950 into the campusmanager.
    Tese devices are presente as unconnected devices with status reachable.
    Where is the failure.
    Best regards.
    Volker

    Since you're using Campus 3.1, are the Cat2950 and 3550-12G showing up with the correct icon on the map?. Since, I don't see these listed in the Supported Device List at:
    http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/camp_mgr/sup_dev/dev_spt.htm

  • FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1

    FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1 x64 on an MSI GT72-2QD laptop. I tried 2 different webcams but the result was the same. Both the internal mic and the ones going with the webcams work fine with other software but when I try FMLE it looks as follows:
    It says that there's no audio device connected (although the mics work fine elsewhere), the dropout is blank and the audio parameters are grayed out and inactive even with the "audio" box checked. Both versions of FMLE work fine with the same cams on a desktop which has all the same tech specs but uses Win 7 x64. Running FMLE in Win7 compatibility mode or reinstalling with register cleaning doesn't help. What can be done about it?

    Hi Bob,
    Thanks for the advice. It succeeded.
    The steps I made was to make a disk copy of my original Windows XP disk using Disk Utilty. Then I renamed the disk copy into .iso. I copied the ISO file to my usb flash drive.
    Than I started Parallels 7, created a new VM, selected the correct drive to install from (the usb flash drive) and volia, it worked.
    Finally...
    Sytze

  • Satellite P30-145: Don't have an audio device in 'Sounds and Audio devices'

    Hi guys,
    I've only just fixed one problem with the help of one fantastic member but now I have another!
    All of a sudden my speakers decide not to work!! I checked the volume etc and alll was fine but when I went in control panel>sounds and audio devices it says I don't have an audio device!!!
    It worked fine this morning and I havn't done anything that could have done this.
    These problems I'm having are all spontaneous, I don't know what's going on!
    Does anyone know how I can fix this and does anyone suspect virus activity? (I have done a scan which said I don't have any)
    I use a P30-145
    Many thanks

    Hi
    Did you check the device manager?? Is the sound card listed properly in the device manager or some yellow exclamation marks appear?
    Did you try to reinstall the sound driver? If not, please try it.
    Of course I would also recommend to update the anti virus applications and to scan the system for virus and malware

  • Using Garageband and I cannot hear previously recorded tracks on headphones.  Prefs are set to output on EMU0404 my audio device - this did work but now is not working.

    I am using Garageband and I cannot hear the previously recorded tracks on my headphones.  I am using an audio input/output device, EMU0404 - this was previously working fine but stopped.  All cables check out OK and so does the unit - I have updated to the latest version of Garageband but this did not help.  Any suggestion?

    Hi Christoph,
    I cannot see anything wrong with the EMU0404.  This is what puzzels me ... Garageband looks OK - headphones are OK - EMU looks OK.
    Thanks anyway
    Paul

Maybe you are looking for