No audio devices are installed hp pavilion dv9623ca windows 7 ultimate 32 bit

have tried restoring at one time it came back but after shut down had gone.

Then entire pavilion dv laptop line have problems with the system speakers. the ribbon cable is damaged. 
It's a poor design. 

Similar Messages

  • Speakers Work, but it shows "No audio devices are installed"

    An automatic update occured, and a blank box popped up continuously(Titled: C:/swsetup/sp59654/IDTSetup.exe)
    I was using my USB headset during that update, then all of a sudden they stop working and only my speakers were working, and no devices were being shown under playback devices nor under recording devices. 
    I have show disabled/disconnected devices checked.

    Hi Yiruso,
    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I will be happy to help you with the “No audio devices are installed. I will need some more information they what you provided. What operating system are you running? What is the product number of your notebook?
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Lenovo T430 - No Audio Devices Are Installed - I am out of ideas

    Hey all,
    Over the last week we have had multiple laptops lose sounds after some windows updates came through.. When clicking on the speakers on the bottom right on the screen and going to playback, recording devices, etc. all we get is a No Audio Devices Are Installed message.
    I checked the device manager and there are indeed some problems with the audio drivers as they have yellow exclamation marks, but I can not get them fixed.
    I have completely uninstalled the drivers in the device manager, rebooted to let windows try and find a generic driver and I got a failed message after it searched for a while.. I uninstalled again and downloaded a realtek audio HD driver and installed.. That did not fix this issue.
    I uninstalled the drivers a third time and downloaded the audio drivers from the downloads section from this Lenovo T430 webpage. I installed them and they seemed to install, but it still has not fixed the issue.
    Anytime I try to manually update the drivers I get a "This driver is currently up to date".
    What I am seeing still under the Sounds, Video and game controllers section in the device manager is an:
    High Definition Audio Device
    and a
    Realtek High Definition Audio.
    Both with yellow exclamation points. If I right click and go to properties, on the first one it shows the driver date as 11/19/10, driver version 6.1.7601.17514.
    The properties on the second one are as follows - 9/13/13 version 6.0.1.7040
    Any idea on what might be going on and how to fix this issue.. I am at a lose on what to try next..
    Thanks,
    Jeryn

    Look for a folder named "swtools" or something like that.  It's a subfolder there.

  • Windows Server 2008 R2 - No Audio Devices are installed

    I have a Vm that is running windows Server 2008 R2. I says there are "No Audio Devices are installed" I have tried everything!!!
    this :
    Please launch Device Manager, right click on the sound card and select “Update Driver Software” to check if it can be updated via Windows Update.
    everything!!!
    please help!!!
    I am using a VM from AWS

    Quote from irfan H
    The error message indicates that the Audio service is failing to start on your computer.
    You can try the below methods to fix this issue:
    Method 1:
    Run Audio troubleshooter that will automatically diagnose and fix any audio issues. You can refer this article to run Audio troubleshooter:
    http://windows.microsoft.com/en-US/windows7/Open-the-Playing-Audio-troubleshooter
    Method 2:
    Check the services manually.
    I suggest that you check if the dependency services are started and check if you have the same issue.
    a.     Click Start, type Services.msc in the Start Search box.
    b.     Scroll down the list of services, right-click Windows Audio and select Start.
    c.       Select Properties for Windows Audio and set its Startup Type to Automatic.
    If the Windows Audio service does not start and you get the error ‘Error 1068: The dependency service or group failed to start, then make sure that the following services are started and their Startup Type is set to Automatic’
    a.     Plug and Play
    b.     Multimedia Class Scheduler
    c.      Windows Audio Endpoint Builder
    Method 3:
    If the dependency services are not starting, you can uninstall and reinstall the Audio drivers. This will reset all the Audio components on your computer.
    To uninstall a device with Device Manager:
    a.     Click on start and type devmgmt.msc
    b.     In Device Manager's left panel, open the node that represents. You should be able to find the Audio device under the Sound, Audio and Game controller. Uninstall and then right-click the device entry.
    c.      On the shortcut menu, click Uninstall.
    d.     On the Confirm Device Removal dialog box, click OK to start the uninstall process.
    Once you uninstall the device, install the latest drivers by downloading it from the manufacturers’ website (Realtek).
    Note:Make sure that you have the source to install the Audio drivers before you install it. Also create a System restore point before uninstalling the device.
    Thanks,
    Irfan H, Microsoft Answers Support Engineer. Visit our Microsoft Answers Feedback Forum and let us know what you think.

  • Can't install netbeans 8 on windows 7 ultimate 32 bit (Java Platform SE binary has stopped working), problem event name : BEX

    I can't install netbeans 8 on my windows  7 ultimate 32 bit. Please help me.. This is the error message :
    Java Platform SE binary has stopped working
    Problem signature:
      Problem Event Name:    BEX
      Application Name:    java.exe
      Application Version:    8.0.5.13
      Application Timestamp:    53280287
      Fault Module Name:    StackHash_2264
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    00000000
      Exception Offset:    00000040
      Exception Code:    c0000005
      Exception Data:    00000008
      OS Version:    6.1.7600.2.0.0.256.1
      Locale ID:    1033
      Additional Information 1:    2264
      Additional Information 2:    2264db07e74365624c50317d7b856ae9
      Additional Information 3:    875f
      Additional Information 4:    875fa2ef9d2bdca96466e8af55d1ae6e
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    1. I had similar problem and upgrade of BIOS has helped.
    2. Try Oracle support forum if 1 does not help.
    Rgds
    Milos

  • HP pavilion g6 says no audio devices are installed?

    My laptops internal mic has stoped working and is now saying there are no audio devices installed? The speakers, and the web cam work fine but the mic has stopped working.

    Try installing HP Support Assistant which will automatically download and install drivers/updates:
    HPSA Link:
    http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html
    Also, download and install any firmware, BIOS or reinstall sound application from hp.com
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

  • Upgrade from windows vista to windows 7. No audio devices are installed.

    Monitor with built in speakers= HP w2007
    Desktop= HP Pavillion a6050e
    Did support chat with microsoft and they cannot solve the issue.
    Running the original disc that came with the monitor did no solve the issue. Running it in vista compatibility did not solve the issue either.
    Tried to update from HP support drivers for vista and it didn't not solve the issue.
    There are no driver updates fround for windows 7 in hp support.
    -audio symbol in task bar shows red x
    -device manager shows: other devices/multimedia audio control/the drivers for this device are not installed. (code 28)
    ----when i try to update the driver it says windows cannot find driver software for your device.
    Please help, this is frustrating.

    after hours of dealing with microsoft suppor and HP support I got annoyed and tired. I then decided to check out the bios and figured out the solution myself!!!!
    when booting computer do F10 setup. Change the audio from auto to enabled. Then the computer recognizes the audio device and installs updates. right click on the audio icon in the taskbar and select playback devices then pick your device.
    What a waste of a day..... hopefully this helps out other people and HP/Microsoft needs to put this on their support site.

  • Pavillion g6-2212sa Windows 8 64 bit No Audio devices are installed

    Hi all,
    I followed the steps under the HP support site to use the Windows troubleshooting guide to fix problems with the audio:
    http://i.imgur.com/p7BDHqX.png
    I updated the driver to the latest driver, audio plays but there are no devices installed
    http://i.imgur.com/IWNVef0.png
    Downgrading the driver to the older version doesn't fix the issue either.
    I also used the HP recovery manager to ensure I had the original version installed.
    I don't have a previous restore point to go back to.
    I had BIOS version F.25, followed advice in this thread installed driver
    sp55036.exe, and also flashed my bios back to f.22 (which was when around the time I purchased the laptop)
    Any advice/ help appreciated.
    This question was solved.
    View Solution.

    Hi, this is my first time here, so your feed back was great; however, I do not like and am trying to take a different route because refresh means my personal setting and other additional softwares that were installed will not existed. 
    Also, firewall blocks every software, update, or any devices that are needed to be updated, reinstalled, restored, etc.  I have been going through window/systems 32 or 64 and choose the right updating software.ex in order for my system to work.  Refresh will remove all that I had accumulated for softwares, devices, updates to work through firewall.
    Do you have another solutions??  It is urgent because my audio device window 8 notebook pc is lost somewhere, and I am not ablbe to find location of the reinstalling audio device.
    Look forward to hearing from you,
    K

  • No audio devices are installed

    Hi everyone,
    So there's a white x on a red circle on my volume icon. I've had this problem for about 3 months now and have not found any solution. I haven't had the chance to seek professional help so I figured I'd get some help here.  I've matched the model/type of my laptop to get the needed audio device/codec for my laptops, there were 3 and all failed to download. I tried click on the x of my volume icon, it told me that hardware changes are detected but there wasn't any solution given. I basically searched every solution there is when it comes to not having an audio device and all have failed. 
    On my device mananger under sound, video games & controllers, there is an exclamation mark on Conexant High Definition SmartAudio hd2. What does that mean? If I do uninstall it and try to download it from here, I know it will fail because that's what's been happening.
    My laptop model is dv2550se Special Edition - 64-bit Vista.

    Wow, never mind. I totally solved it just now and I have no idea how. 3 months of figuring out. I'm am crying tears of joy right now.

  • No audio devices are installed in recording section.

    I have pc win7 ultimate and hd audio device from microsoft... playback is working but it says that there are no recording devices? can you pls explain easiest way for me to record something on my pc?

    Hi,
    By default Windows Vista and Windows 7 will not show playback or recording devices that are disabled. To enable Windows to show disabled devices follow the steps below.
    1.Click Start.
    2.Click on Control Panel.
    3.Click on Hardware and Sound, then click the Sound icon.
    4.Click on the Recording tab.
    5.Right-click anywhere in the box where the devices are listed.
    6.Click on Show Disabled Devices so there is a check mark next to it.
    7.This displays any device that has been disabled on the computer. If no new devices are found it's likely no device is being found because it's not detected by Windows. If you're having sound issues we'd suggest reinstalling your sound drivers.
    8.Right-click the new icon(s) found and click Properties.
    9.Beside 'Device usage', there is a dropdown menu. Click on 'Use this device (enable)'.
    If the error still prompts, try to open the Recording Audio troubleshooter:
    Open the Recording Audio troubleshooter
    http://windows.microsoft.com/en-in/windows7/open-the-recording-audio-troubleshooter
    Karen Hu
    TechNet Community Support

  • Hp pavilion tx2000 windows 7 ultimate 64-bit

    My school just got the windows 7 ultimate cds form Microsoft and I installed on my hp pavilion tx2000. Everything is great except for the issue where sometimes my mouse pointer would start to move to the bottom of the screen, especially in the rightbottom corner and click on its own, causing windows to pop up from my taskbar? How can I fix this? I checked my Device Manager and I have no errors and I have downloaded and installed EVERYTHING form Windows Update with the exception of the foreign languages that are offered via Windows Update. Any advice would help? Thanks.
    Oh yeah forgot to mention. I used to have Vista ultimate and it did the same problem but I just thought it was a Vista Combatibility issue. I assumed Windows 7 would fix it. So I did a clean install of Windows 7 ultimate on my tablet but the problem continued to persist.
    Message Edited by khalidalkalla on 10-19-2009 10:31 PM

    i have the same problem but i gotta it fixed by installing tune-up utilities 2010 and performed all the tune ups in all aspects..then installing Auslogics BoostSpeed 4.1 and performed one-button check-up except only for the registry clean-up..uncheck it..after that disk cleaner and disk defrag..note: in a certain point in disk defragging my laptop shuts down automatically but i just repeat the defragging when it boots up again..i think that was a couple of times..but after repeating it all over and over again..it will came to a point that it will be completed. i also installed kaspersky internet security 2011 and performed full computer and critical scan..same thing happened but i always start it all over again..after completing all of that i also installed all the important and optional updates of windows...after that my trackpad works well!!!
    but i still have an issue, the stylus pen of tx2000 just keeps on dragging in itself without clicking it but if i use the pen of my tx1000 it works perfectly also the touch using fingertips is perfectly fine..i just calibrated it in all screen orientation.. 

  • How to install VMware WorkStation on Windows 7 Ultimate 32 bit.

    Hi there, 
    I m new to this and need help as I am trying to intall VMware Workstation(may be 11.0) on Windows 7 Ultimate 32bit, on which I will deploy Windows 2008 R2 and Windows 2012.'
    Here is my laptop Config:
    Processor: Intel(R) Core(TM) i3-2328M CPU @ 2.20GHz 
    RAM: 6 GB(3.22 GB Usable)
    I have tried my hands with fewer available(online) VM workstation 11 which reads as compatible with Win 7 32.. But when I have downloaded and trying to install, it says it is not compatible with 32bit but on 64bit. 
    I have Windows 7 Ultimate 32bit installed on my laptop. 
    Hence, please suggest me with the link for vmware workstation 11. Also, please let me know if it is recommended  to install vmware workstation and on that install 2008 R2 and 2012 both Server Operating Systems.
    Your time will be appreciated.
    Thanks & Regards,
    ME

    Firstly, thanks for the reply...
    Can I go for vmwware workstation 10.0.4 with my windows 7 ultimate 32bit..
    Also, Will my system work properly if I install 2008 r2 and 2012 Server OS on Vmware workstaion which in deployed on Windows 7.
    Your suggestions will be appreciate.
    Thanks,
    ME

  • Pavilion a6403w windows 7 ultimate 32 bit hangs on restart

    Hello  my pavilion a6403w  cpu intel  dual 2160 1.80ghz 1.80ghz 4 gb ram  with windows7ultimate 32 bit
    hangs ot stops after restart gets to the blue screen with the 4 color box thing in middle ... only thing i find i can do is shut down with power button turn system back on it goes to the screen to use safe or normal mode useing normal mode most of the time takes care of it some times half to turn off computer 4-5 or more times till is will start normaly.. by the way my windows 7 was freash install  not upgrade system came with vista.. please help
    thanks for reading James
    UPDATE : I i tryed the tests  all came back ok.. the only test i could not do was the cmd
    sfc/scannow  system said i had to be adminastrtor witch i am being only user on computer..
    after running other tests computer took 4 times turn off at button to finaly load windows correctly
    any other ideas??
    This question was solved.
    View Solution.

    Do you allow your PC to go into sleep mode and when you wake it is then when you are having the issue?
    Are you running bios version 5.27?  Another thing to do is to download and install the latest video card driver from the manufacturer's web site.
    One last thing is to unplug your PC and open it up. Clean out all of the dust. Now carefully remove and replace all the cables going to the motherboard one at a time. Then do the same for the memory dimms and the sound and video cards if you have any.
    Be sure that you do not have bios diagnostics enabled in the bios.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Installing Captivate 2 in Windows Vista Ultimate 64 Bits

    Help help help !
    It just doesnt worked.
    I have tried all kinds of things (like removing UAC), running
    in compatibility mode WXP SP2, always running as an admin
    (explicitly). Does Captivate 2 installer work on Windows Vista
    Ultimate 64b ? If it does what am i doing wrong?
    Thanks to all in advance for any help you can give me.

    I don't believe CP2 is Vista compatible, only CP3 is.
    http://www.adobe.com/support/documentation/en/captivate/2/releasenotes.html#sysreqs
    Erik
    boriskasparov wrote:
    > It just doesnt worked.
    Erik Lord
    http://www.capemedia.net
    Adobe Community Expert - eLearning
    http://www.adobe.com/communities/experts/
    http://www.awaretips.net -
    Authorware Tips!

  • (HP Pavilion g6) Audio devices are not installed

    Hello,
    I cannot view my audio devices.  "No audio devices are installed" appear in my sound manager.  I have right-clicked and ensured that I can view disabled devices.  Is there a way to reinstall the sound devices for my HP notebook?  Also, is there anything to check before I look into reinstalling them?
    Thanks!
    This question was solved.
    View Solution.

    Try a hard reset, works sometimes.Disconnect all external devices first.
    1-remove power cord and battery
    2-press power button for 30 seconds
    3-reinstall only power cord for first startup.
    4-power on
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

Maybe you are looking for