No audio devices available in late-2013 iMac

Updated Mavericks to 10.9.1 yesterday.
Today there are no analog audio devices available for output.  Airplay devices work normally.
I have reset PRAM, disconnected all peripherals etc.  Have tried connecting audio devices to the 3.5mm output jack.
Any suggestions?
Thanks in advance.

This issue was resolved by re-installing 10.9 over 10.9.1.
Think I'll wait for 10.9.2 until I update again.

Similar Messages

  • USB Audio Problems Late 2013 iMac - Clicking / Popping / Dropouts

    I am having audio clicking and popping issues with a brand new late model 2013 iMac and a USB 2.0 multi-channel audio recording interface.  Here is what I have learned so far:
    Clicking and popping is occurring in both directions - playback and recording.  I am not having any issues with internal audio, so this was easy to verify.
    The same issue appears in many threads in Apple Support Communities and in various recording/pro audio forums, so this seems to be a common issue.
    The issue is independent of the audio interface that is used.  (I am using a brand new Focusrite Scarlett 18i20 that I purchased specifically to use with my new iMac, but the forums report the same issues for a variety of other interfaces and audio devices.)
    Five potential root causes are mentioned in the various forums:
    1)  USB 3.0 compatibility issues - poor backward compatibility or other issues
    2)  Fusion Drive activity - artifacts caused by drive "swapping"
    3)  OS X version - newer versions may be worse than old versions
    4)  App Nap - ?
    5)  Driver issues
    Potential short-term solutions include:
    1)  Change driver - The "Class Compliant Mode" app (that I downloaded from the link on the Focusrite website) improved the issue for me, but clicking and popping occurs every few seconds instead of constantly.
    2)  Exchange the Fusion Drive for a conventional 7200 RMP hard drive - Forums report that this does not fix the issue.
    3)  Install older version of OS - Forums report that this does not fix the issue.
    4)  Disable App Nap - Forums report that this does not fix the issue.
    5)  Belkin Thunderbolt express dock - Forums report that a Thunderbolt hub with USB gives excellent results, but the only one I am aware of is the Belkin one which is ~$300.  (I will not pay $300 to fix thousands of dollars of new equipment that should not need to be fixed!!!)
    6)  Apple Care's advice was an SMC reset (essentially a reboot), which clearly did not work.  The person that I talked to was not aware of this being a known issue.
    I am at a point where I need to decide whether or not to get a refund for this iMac since my primary reason for getting this new computer was recording.  So...can anyone help to answer these questions:
    Has Apple acknowleged this issue?  If so, has Apple committed to fixing this issue via a software upgrade or have they admitted that this is a hardware limitation that is not fixable?
    Has anyone found a free or inexpensive workaround (i.e. not the $300 Belkin dock) that completely elimiates this issue?

    I'm also having audio issues on my new late 2013 iMac via the USB headset.  Audio starts playing fine and then static starts creeping into the audio until it drowns out the sound.  Only way to fix is to unplug the headset and then plug it back into the USB port.
    I've tested the headset on other PCs and my older iMac and the issue doesn't show up.
    I've re-installed Mavericks on the iMac, without nuking my data, but that still doesn't solve the issue.
    I've logged a case with Apple support and they had me run a program which gathered up a bunch of information to send to their engineering team.  No updates yet so far.
    Just one question for those that also have this issue.  Did you restore your data from a Time Machine backup, or is this issue also happening on the Mac that's fresh out of the box?
    I'm wondering if this issue could be caused by restoring data from my Time Machine, but I don't want to go through the hassle of nuking my entier hard drive and having to reinstall everything from scratch just to fix this issue.

  • Mac OSX Mavericks 10.9 firewire audio problem on RME Fireface 800, MOTU 828 Mk II and Apogee Duet on late 2013 iMac i7

    I just got the late 2013 iMac 3.5GHz Intel Core i7 and all my firewire based audio interfaces do not work properly although I upgraded to the latest drivers. iTunes or Youtube can play for a short and then there are unbrearable digital noises.
    Apogee Duet is slightly better that can play for a few minutes. Then it may have short pause or digital noises. I need to reset the "Sample Rate" to other values to get it work again.
    MOTU 828 mk II and RME Fireface 800 are having the most serious problems. Alternating the sample rate can sometimes help but often I need to reboot the iMac to get it work again. However, it works for only 1-2 minutes before the digital noises.
    These are the software/drivers I installed:
    - Apogee Maestro 2 version 2.8.8
    - MOTU Universal Audio Installer for Mac OS X version 1.6.58373 (8/20/2013)
    - RME version 3.19, firmware 2.77
    I connect the fireware through Apple Thunderbolt to Firewire convertor.
    These drivers are supposed to work with 10.9 but they don't. Anyone can help or share experience?

    I've read in other forums that there are two issues that is causing this problem of chopping audio and freezing interfaces.  One has to do with USB 2.0 /USB 3.0 issues in OS.  The other seems to be an issue with the Fusion drive.
    The fix for the fusion drive issue that has been shared online is to either:
    Option #1.  Don't use the fusion drive and create an external boot drive clone (either SSD or standard HD) and use as your primary drive (completely surpassing the internal fusion drive).
    Option #2.  Split the internal fusion drive.  From there you can use them as two separate logical drives.  Load your OS on one of the drives (SSD or HD).   http://www.macworld.com/article/2015664/how-to-split-up-a-fusion-drive.html
    Before, you do any of the above, make sure that you backup your current system setup.
    I just received my imac (2013) with 3TB fusion and I plan on trying option #1.  I bought a 3TB external USB drive which I plan to clone after I have the machine running.  Once I clone the internal drive, I will test how the machine runs from both the internal fusion and the external to prove if this addresses the audio clipping/stopping problem.  Hopefully, Apple will find a fix for this.
    It is really a dissapointment that a brand new $2500+ machine and software was not tested to perform something that my 2008 MacBookPro and my home built Window XT machine (circa 2003) did without issue.  I wished that I would have checked the forums about these issues before I purchased the machine. 
    You can do some searches online and find even more detail discussions on this topic.
    Message was edited by: Juice5280

  • More frequent Kernel Panics on late 2013 iMac

    For the last couple of weeks I have been experiencing random iMac restarts with the kernel panic message (http://core0.staticworld.net/images/article/2013/02/kernel-panic-pre-ml_300-1000 24407-medium.png). I have not installed anything suspicious, I have verified the HDD, everything is ok, done the hardware test after a restart (the D button) with no issues found and when I go to the Library, Logs there is no kernel panic report nor any other information on the issue. It seems as the aforementioned message just appears, the iMac restarts and comes back to normal without any additional problems/problem information.
    I have late 2013 iMac with os 10.10, everything up to date and fabric Ram memory with a lot of free space on the HDD.
    I would really appreciate if someone could give me some pointers or let me know what this could be. Thanks a lot!

    Here it is:
    Anonymous UUID:       C031B16F-4CEA-99A0-BCFF-4172A022A598
    Fri Oct 24 22:52:20 2014
    *** Panic Report ***
    panic(cpu 2 caller 0xffffff800b41e80a): Kernel trap at 0xffffff7f8d1f80e8, type 13=general protection, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000166b9b000, CR3: 0x000000024205503a, CR4: 0x00000000001626e0
    RAX: 0xffffff801e813c00, RBX: 0xffffff801e813c00, RCX: 0x0000000000000000, RDX: 0x7fffffffffffffff
    RSP: 0xffffff8115763cd0, RBP: 0xffffff8115763cf0, RSI: 0xffffff801e813c00, RDI: 0xffffff801e10ba08
    R8:  0x00000000000019e4, R9:  0xffffff800fc68148, R10: 0x0000000000000000, R11: 0x000000000000063c
    R12: 0x1000000000000000, R13: 0x0000000000000003, R14: 0xffffff801e10ba08, R15: 0xffffff802cd55000
    RFL: 0x0000000000010206, RIP: 0xffffff7f8d1f80e8, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000166b9b000, Error code: 0x0000000000000000, Fault CPU: 0x2
    Backtrace (CPU 2), Frame : Return Address
    0xffffff810dee5e10 : 0xffffff800b33a811
    0xffffff810dee5e90 : 0xffffff800b41e80a
    0xffffff810dee6050 : 0xffffff800b43a443
    0xffffff810dee6070 : 0xffffff7f8d1f80e8
    0xffffff8115763cf0 : 0xffffff7f8d1f99b2
    0xffffff8115763d20 : 0xffffff7f8d2041f1
    0xffffff8115763d50 : 0xffffff7f8d29f940
    0xffffff8115763d80 : 0xffffff7f8d202990
    0xffffff8115763db0 : 0xffffff7f8d202a05
    0xffffff8115763dd0 : 0xffffff800b8ff2eb
    0xffffff8115763df0 : 0xffffff800b3ee455
    0xffffff8115763e10 : 0xffffff800b33e91c
    0xffffff8115763e40 : 0xffffff800b3235a3
    0xffffff8115763e90 : 0xffffff800b333e8d
    0xffffff8115763f10 : 0xffffff800b40a142
    0xffffff8115763fb0 : 0xffffff800b43ac66
          Kernel Extensions in backtrace:
             com.apple.iokit.IOAcceleratorFamily2(156.4)[20DDCE61-E3EC-3CC1-8B79-170CEF2B603 A]@0xffffff7f8d1e3000->0xffffff7f8d24ffff
                dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f8bb24000
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f8bdec000
             com.apple.GeForce(10.0)[26D2EC64-4AF8-32C8-BF74-5B1E80772FAA]@0xffffff7f8d25e00 0->0xffffff7f8d2f3fff
                dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f8bb24000
                dependency: com.apple.iokit.IONDRVSupport(2.4.1)[F4738C55-B507-3627-A9CA-3D29A5230A03]@0xff ffff7f8be33000
                dependency: com.apple.nvidia.driver.NVDAResman(10.0.0)[53CC0E05-7382-336C-8239-AE884D6CA71A ]@0xffffff7f8be49000
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f8bdec000
                dependency: com.apple.iokit.IOAcceleratorFamily2(156.4)[20DDCE61-E3EC-3CC1-8B79-170CEF2B603 A]@0xffffff7f8d1e3000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    14A389
    Kernel version:
    Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
    Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
    Kernel slide:     0x000000000b000000
    Kernel text base: 0xffffff800b200000
    __HIB  text base: 0xffffff800b100000
    System model name: iMac14,2 (Mac-27ADBB7B4CEE8E61)
    System uptime in nanoseconds: 29948396975274
    last loaded kext at 15673659043007: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7f8dd7d000, size 69632)
    last unloaded kext at 17607432106459: com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0 (addr 0xffffff7f8dd69000, size 81920)
    loaded kexts:
    com.apple.driver.AudioAUUC 1.70
    com.apple.driver.AppleHWSensor 1.9.5d0
    com.apple.driver.AGPM 100.14.37
    com.apple.driver.ApplePlatformEnabler 2.1.0d1
    com.apple.driver.X86PlatformShim 1.0.0
    com.apple.filesystems.autofs 3.0
    com.apple.driver.AppleBluetoothMultitouch 85.3
    com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
    com.apple.driver.AppleMikeyHIDDriver 124
    com.apple.driver.AppleOSXWatchdog 1
    com.apple.driver.AppleHDA 266.5
    com.apple.driver.AppleMikeyDriver 266.5
    com.apple.iokit.IOUserEthernet 1.0.1
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AppleUpstreamUserClient 3.6.1
    com.apple.driver.AppleThunderboltIP 2.0.2
    com.apple.driver.AppleBacklight 170.4.12
    com.apple.driver.AppleHWAccess 1
    com.apple.driver.AppleIntelHD5000Graphics 10.0.0
    com.apple.driver.AppleHV 1
    com.apple.driver.AppleLPC 1.7.3
    com.apple.GeForce 10.0.0
    com.apple.driver.AppleMCCSControl 1.2.10
    com.apple.driver.AppleIntelFramebufferAzul 10.0.0
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
    com.apple.driver.AppleSMCLMU 2.0.4d1
    com.apple.iokit.SCSITaskUserClient 3.7.0
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 35
    com.apple.driver.AppleUSBHub 705.4.1
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.6.5
    com.apple.driver.AppleSDXC 1.6.5
    com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
    com.apple.driver.AirPort.Brcm4360 900.19.8
    com.apple.driver.AppleAHCIPort 3.0.7
    com.apple.driver.AppleUSBXHCI 705.4.14
    com.apple.driver.AppleRTC 2.0
    com.apple.driver.AppleACPIButtons 3.1
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleSMBIOS 2.1
    com.apple.driver.AppleACPIEC 3.1
    com.apple.driver.AppleAPIC 1.7
    com.apple.nke.applicationfirewall 161
    com.apple.security.quarantine 3
    com.apple.security.TMSafetyNet 8
    com.apple.driver.AppleBluetoothHIDKeyboard 175.5
    com.apple.driver.AppleHIDKeyboard 175.5
    com.apple.kext.triggers 1.0
    com.apple.driver.IOBluetoothHIDDriver 4.3.0f10
    com.apple.driver.AppleMultitouchDriver 260.30
    com.apple.iokit.IOSerialFamily 11
    com.apple.driver.DspFuncLib 266.5
    com.apple.kext.OSvKernDSPLib 1.15
    com.apple.iokit.IOAudioFamily 200.6
    com.apple.vecLib.kext 1.2.0
    com.apple.driver.AppleBacklightExpert 1.1.0
    com.apple.driver.X86PlatformPlugin 1.0.0
    com.apple.iokit.IOSurface 97
    com.apple.driver.IOPlatformPluginFamily 5.8.0d49
    com.apple.driver.AppleThunderboltEDMSink 4.0.2
    com.apple.iokit.IOAcceleratorFamily2 156.4
    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
    com.apple.iokit.IOBluetoothFamily 4.3.0f10
    com.apple.iokit.IOUSBUserClient 705.4.0
    com.apple.driver.AppleSMC 3.1.9
    com.apple.nvidia.driver.NVDAGK100Hal 10.0.0
    com.apple.nvidia.driver.NVDAResman 10.0.0
    com.apple.AppleGraphicsDeviceControl 3.7.21
    com.apple.driver.AppleSMBusController 1.0.13d1
    com.apple.driver.AppleHDAController 266.5
    com.apple.iokit.IOHDAFamily 266.5
    com.apple.driver.AppleSMBusPCI 1.0.12d1
    com.apple.iokit.IONDRVSupport 2.4.1
    com.apple.iokit.IOGraphicsFamily 2.4.1
    com.apple.driver.AppleUSBMergeNub 705.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily 1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.iokit.IOUSBMassStorageClass 3.7.0
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
    com.apple.driver.AppleUSBComposite 705.4.9
    com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
    com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6
    com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
    com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
    com.apple.driver.AppleThunderboltNHI 3.1.7
    com.apple.iokit.IOThunderboltFamily 4.2.1
    com.apple.iokit.IOEthernetAVBController 1.0.3b3
    com.apple.iokit.IO80211Family 700.52
    com.apple.driver.mDNSOffloadUserClient 1.0.1b8
    com.apple.iokit.IONetworkingFamily 3.2
    com.apple.iokit.IOAHCIFamily 2.7.0
    com.apple.iokit.IOUSBFamily 705.4.14
    com.apple.driver.AppleEFINVRAM 2.0
    com.apple.driver.AppleEFIRuntime 2.0
    com.apple.iokit.IOHIDFamily 2.0.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 300.0
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.driver.AppleKeyStore 2
    com.apple.driver.AppleMobileFileIntegrity 1.0.5
    com.apple.driver.AppleCredentialManager 1.0
    com.apple.driver.DiskImages 389.1
    com.apple.iokit.IOStorageFamily 2.0
    com.apple.iokit.IOReportFamily 31
    com.apple.driver.AppleFDEKeyStore 28.30
    com.apple.driver.AppleACPIPlatform 3.1
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.corecrypto 1.0
    com.apple.kec.Libm 1
    com.apple.kec.pthread 1
    System Profile:
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x111), Broadcom BCM43xx 1.0 (7.15.124.12.8)
    Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial ports
    Thunderbolt Bus: iMac, Apple Inc., 23.10
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x802C, 0x384B54463531323634485A2D314736453220
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x802C, 0x384B54463531323634485A2D314736453220
    USB Device: BRCM20702 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: MT1836
    USB Device: USB 2.0 Hub
    Serial ATA Device: APPLE HDD ST1000DM003, 1 TB
    Model: iMac14,2, BootROM IM142.0118.B07, 4 processors, Intel Core i5, 3.2 GHz, 8 GB, SMC 2.15f7
    Network Service: Wi-Fi, AirPort, en1
    Graphics: NVIDIA GeForce GT 755M, NVIDIA GeForce GT 755M, PCIe, 1024 MB

  • Why does my iPad keeps connecting and disconnecting from the new late 2013 iMac

    Hi there,
    I've recently bought a new late 2013 iMac and ever since then I'm not able to connect my iPad 2 to it. When I do connect it keeps connecting and disconnecting  again and again for some reason. The cable is fine and I've tried it with other devices. Just wondered why this is and whether you guys can help me out.
    Thanks a lot!
    CitizenJohnny

    Hi,
    I had the same problem and just found a solution. I tryed restoring all content and settings on the iPad (Settings > General > Reset > Erase All Content and Settings). It took lots of time, however it didn´t work because when I connected the iPad and iMac the problem persisted.
    Then I thought it wasn´t an iPad problem but iMac OSX problem. So I searched the web for "Reinstall Mavericks" and found this http://support.apple.com/kb/PH13871?viewlocale=en_US&locale=en_US.
    It also takes like 6 hours with my internet speed. Next day I connected the iPad and everything is just fine.
    I described both processes because I don´t know if in the end the iPad reset helped in the solution.
    Hope that helps! good luck

  • Late 2013 iMac running very slow

    EVERYTHING is running slow.  My iphoto screensaver keeps freezing, all apps open super slow (wheel spins and spins) and iCal is not syncing properly with google calendar anymore.  I'm not sure what happened in the past few weeks but it has gotten bad!  My computer is only a couple months old.  I ran etrecheck in hopes someone can tell me what's going on.  I also ran disc utility and it found nothing wrong with my hard drive.  I'm running 10.9.1, 2,7 GHz Intel Core i5, 8GB memory. 
    Thanks in advance!!  If all else fails I will head to the nearest Genius Bar.
    Here is the etrecheck report:
    Hardware Information:
              iMac (21.5-inch, Late 2013)
              iMac - model: iMac14,1
              1 2.7 GHz Intel Core i5 CPU: 4 cores
              8 GB RAM
    Video Information:
              Intel Iris Pro - VRAM: 1024 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 3:30:26
    Disk Information:
              APPLE HDD HTS541010A9E662 disk0 : (1 TB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 999.35 GB (796.12 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Inc. iPad
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. FaceTime HD Camera (Built-in)
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.leapfrog.connect.authdaemon.plist 3rd-Party support link
              [System] com.macpaw.CleanMyMac2.Agent.plist 3rd-Party support link
              [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
    Launch Agents:
              [System] com.citrix.AuthManager_Mac.plist 3rd-Party support link
              [System] com.citrix.ReceiverHelper.plist 3rd-Party support link
              [System] com.citrix.ServiceRecords.plist 3rd-Party support link
              [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.google.Chrome.framework.plist 3rd-Party support link
              [not loaded] com.google.keystone.agent.plist 3rd-Party support link
              [not loaded] com.leapfrog.connect.monitor.plist 3rd-Party support link
              [not loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist 3rd-Party support link
              [not loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist 3rd-Party support link
              [not loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist 3rd-Party support link
    User Login Items:
              None
    Internet Plug-ins:
              FlashPlayer-10.6: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              Flash Player: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
              CitrixICAClientPlugIn: Version: 11.8.2 - SDK 10.7 3rd-Party support link
              Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    User Internet Plug-ins:
              Google Earth Web Plug-in: Version: 7.1 3rd-Party support link
    3rd Party Preference Panes:
              Flash Player  3rd-Party support link
              Java  3rd-Party support link
    Bad Fonts:
              None
    Old Applications:
              /Library/Application Support/Microsoft/MERP2.0
                        Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                        Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
              Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
              /Applications/Microsoft Office 2011/Office
                        Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Office Setup Assistant:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              /Applications/Microsoft Office 2011
                        Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   5%          ReportCrash
                   4%          CalendarAgent
                   1%          WindowServer
                   0%          EtreCheck
                   0%          coresymbolicationd
    Top Processes by Memory:
              890 MB          CalendarAgent
              49 MB          Google Chrome
              28 MB          com.apple.WebKit.WebContent
              25 MB          Safari
              25 MB          iTunes
    Virtual Memory Information:
              17 MB          Free RAM
              1.22 GB          Active RAM
              1.21 GB          Inactive RAM
              1.03 GB          Wired RAM
              993 MB          Page-ins
              97 MB          Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
    Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking  anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fr='\nRAM details:\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -q XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed '/^ *$/d; s/^ */   /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`SP USB | sed -n '1d; /:$/{s/ *:$//;x;s/\n//p;}; /V.*[(]/{s/^[^(]*/ /;H;}; /Apple/{s/.//g;h;}'`; Pm "USB"; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia*; for f in *; do [[ "$f" =~ h$ ]] && grep -ql "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
    exec sh
    in the window and press return. You should then get a new line ending in a dollar sign.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
    8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If it happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Late 2013 imac randomly restarts

    I have a late 2013 imac, 27in, 3.5ghz i7 cpu, 3tb hard drive, , i ordered the kingston recommended Ram 32 GB [ KTA-MB1600L/8G],is work for the first day after that the computer restart itself randomly , so the problem is i open too much websit on Chrome or connect to much USB DEVICE ? or something else ??
    Any thoughts on what is happening? Thank You !
    Wed Mar  5 03:35:43 2014
    panic(cpu 0 caller 0xffffff80158dbe2e): Kernel trap at 0x00000000017ff000, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x00000000017ff000, CR3: 0x000000003f8eb030, CR4: 0x00000000001606e0
    RAX: 0x0000000000000004, RBX: 0xffffff8056096780, RCX: 0xffffff80158b0a9f, RDX: 0xffffff80158dc3a0
    RSP: 0xffffff83cd7bbf40, RBP: 0xffffff83cd7bbf90, RSI: 0x0000000000000000, RDI: 0xffffff8056096780
    R8:  0x0000000000000001, R9:  0x0000000000000001, R10: 0x0000000000008000, R11: 0x0000000000000202
    R12: 0x0000000000000000, R13: 0x0000000000000007, R14: 0x0000000000000001, R15: 0x0000000000000003
    RFL: 0x0000000000010282, RIP: 0x00000000017ff000, CS:  0x0000000000000008, SS:  0x0000000000000000
    Fault CR2: 0x00000000017ff000, Error code: 0x0000000000000010, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff83cd7bbbd0 : 0xffffff8015822fa9
    0xffffff83cd7bbc50 : 0xffffff80158dbe2e
    0xffffff83cd7bbe20 : 0xffffff80158f3326
    0xffffff83cd7bbe40 : 0x17ff000
    0xffffff83cd7bbf90 : 0x7fff7f20af00
    0xffffff83cd7bbfc0 : 0xffffff83cd7bbf40
    0xffffff8056096780 : 0x0
    Unaligned frame
    Backtrace terminated-invalid frame pointer 0xf
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    13C64
    Kernel version:
    Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
    Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
    Kernel slide:     0x0000000015600000
    Kernel text base: 0xffffff8015800000
    System model name: iMac14,2 (Mac-27ADBB7B4CEE8E61)
    System uptime in nanoseconds: 10492776507974
    last loaded kext at 1717603031959: com.parallels.filesystems.prlufs          2010.12.28 (addr 0xffffff7f97f1b000, size 94208)
    last unloaded kext at 3228964179023: com.parallels.filesystems.prlufs          2010.12.28 (addr 0xffffff7f97f1b000, size 90112)
    loaded kexts:
    com.nvidia.CUDA          1.1.0
    com.paragon-software.filesystems.ntfs          100
    com.apple.filesystems.smbfs          2.0.1
    com.apple.driver.AppleBluetoothMultitouch          80.14
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.iokit.IOBluetoothSerialManager          4.2.3f10
    com.apple.driver.X86PlatformShim          1.0.0
    com.apple.driver.AGPM          100.14.15
    com.apple.driver.ApplePlatformEnabler          2.0.9d1
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.driver.AppleGraphicsDevicePolicy          3.4.35
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.driver.AppleHDAHardwareConfigDriver          2.6.0f1
    com.apple.GeForce          8.2.4
    com.apple.iokit.IOBluetoothUSBDFU          4.2.3f10
    com.apple.driver.AppleHDA          2.6.0f1
    com.apple.driver.AppleUSBCDCECMData          4.2.1b5
    com.apple.driver.AppleUSBCDCACMData          4.2.1b5
    com.apple.driver.AppleMikeyDriver          2.6.0f1
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.driver.AppleIntelHD5000Graphics          8.2.4
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.3f10
    com.apple.driver.AppleMuxControl          3.4.35
    com.apple.driver.AppleBacklight          170.3.5
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleHWAccess          1
    com.apple.driver.AppleIntelMCEReporter          104
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.nvidia.NVDAStartup          8.2.4
    com.apple.driver.AppleSMCLMU          2.0.4d1
    com.apple.driver.AppleLPC          1.7.0
    com.apple.driver.AppleIntelFramebufferAzul          8.2.4
    com.apple.driver.AppleThunderboltIP          1.1.2
    com.apple.iokit.SCSITaskUserClient          3.6.6
    com.apple.driver.CoreStorageFsck          380
    com.apple.driver.AppleFileSystemDriver          3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.driver.AppleUSBHub          666.4.0
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.5.1
    com.apple.driver.AppleSDXC          1.5.2
    com.apple.iokit.AppleBCM5701Ethernet          3.8.1b2
    com.apple.driver.AirPort.Brcm4360          831.21.63
    com.apple.driver.AppleAHCIPort          3.0.0
    com.apple.driver.AppleUSBXHCI          670.4.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          2.1
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleBluetoothHIDKeyboard          170.15
    com.apple.driver.AppleHIDKeyboard          170.15
    com.apple.driver.IOBluetoothHIDDriver          4.2.3f10
    com.apple.driver.AppleMultitouchDriver          245.13
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOAcceleratorFamily          98.14
    com.apple.nvidia.driver.NVDAGK100Hal          8.2.4
    com.apple.nvidia.driver.NVDAResman          8.2.4
    com.apple.driver.DspFuncLib          2.6.0f1
    com.apple.vecLib.kext          1.0.0
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.driver.AppleUSBAudio          2.9.5f4
    com.apple.iokit.IOAudioFamily          1.9.5fc2
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.iokit.IOSurface          91
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.3f10
    com.apple.iokit.IOBluetoothFamily          4.2.3f10
    com.apple.driver.AppleGraphicsControl          3.4.35
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.4.1
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.driver.X86PlatformPlugin          1.0.0
    com.apple.driver.AppleSMC          3.1.8
    com.apple.driver.AppleHDAController          2.6.0f1
    com.apple.iokit.IOHDAFamily          2.6.0f1
    com.apple.driver.AppleSMBusPCI          1.0.12d1
    com.apple.driver.IOPlatformPluginFamily          5.7.0d10
    com.apple.AppleGraphicsDeviceControl          3.4.35
    com.apple.iokit.IOAcceleratorFamily2          98.14
    com.apple.iokit.IOGraphicsFamily          2.4.1
    com.apple.driver.AppleThunderboltEDMSink          2.1.3
    com.apple.iokit.IOUSBHIDDriver          660.4.0
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.6
    com.apple.iokit.IOUSBMassStorageClass          3.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.6
    com.apple.driver.AppleUSBComposite          656.4.1
    com.apple.driver.AppleThunderboltDPInAdapter          3.1.7
    com.apple.driver.AppleThunderboltDPOutAdapter          3.1.7
    com.apple.driver.AppleThunderboltDPAdapterFamily          3.1.7
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.5
    com.apple.driver.CoreStorage          380
    com.apple.iokit.IOUSBUserClient          660.4.2
    com.apple.driver.AppleThunderboltNHI          2.0.1
    com.apple.iokit.IOThunderboltFamily          3.2.7
    com.apple.iokit.IOEthernetAVBController          1.0.3b4
    com.apple.iokit.IO80211Family          630.35
    com.apple.driver.mDNSOffloadUserClient          1.0.1b5
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOAHCIFamily          2.6.5
    com.apple.iokit.IOUSBFamily          675.4.0
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.11
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          23
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.9
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    com.apple.kec.pthread          1
    Model: iMac14,2, BootROM IM142.0118.B00, 4 processors, Intel Core i7, 3.5 GHz, 32 GB, SMC 2.15f2
    Graphics: NVIDIA GeForce GTX 780M, NVIDIA GeForce GTX 780M, PCIe, 4096 MB
    Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0198, 0x393930353432382D3135352E4130304C4620
    Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0198, 0x393930353432382D3135352E4130304C4620
    Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1600 MHz, 0x0198, 0x393930353432382D3135352E4130304C4620
    Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1600 MHz, 0x0198, 0x393930353432382D3135352E4130304C4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x111), Broadcom BCM43xx 1.0 (6.30.223.154.63)
    Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: APPLE HDD ST3000DM001, 3 TB
    USB Device: 4-Port USB 3.0 Hub
    USB Device: My Passport 0740
    USB Device: My Passport 07A8
    USB Device: Touro Mobile 3.0
    USB Device: Toshiba USB 3.0 Dock⨌
    USB Device: Toshiba USB 3.0 Dock⨌
    USB Device: My Passport 0748
    USB Device: External USB 3.0
    USB Device: Hard Drive
    USB Device: dynadock U3.0
    USB Device: USB to ATA/ATAPI Bridge
    USB Device: BRCM20702 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: USB2.0 Hub
    USB Device: USB2.0 Hub
    USB Device: USB2.0 Hub
    USB Device: My Passport 071A
    USB Device: My Passport 071A
    Thunderbolt Bus: iMac, Apple Inc., 23.10

    Did you upgradde the RAM? If so, this may be your problem.
    If you want to upgrade to 32GB of RAM on your late 2013 27" iMac and don't want to pay Apple prices, buy the RAM from OWC.
    My iMac, crashed with the first batch of Kingston RAM sourced from an Apple approved service centre. Fortunately I got a full refund then sourced the RAM from OWC and it works perfectly.
    The benefits of OWC are
    1) You can order and ship globally
    2) The price is very competitve
    3) The website clearly states how they test the RAM and the comaptibility with your computers model no.
    4) They have a 30 day refund and a lifetime replacement policy
    5) You can get a rebate on your old RAM, although I didn't bother taking this up.
    Having been through the hassle, using OWC RAM is a no brainer and in my opinion the most convenient and effective upgrade. Hope this helps your decision!

  • New late 2013 iMac running slow

    I purchased a new 21 in iMac in Dec 2013 (late 2013 model), and ever since, its been running very slow. Its slowness is mostly erratic and random, however very noticeable while running Office for Mac documents (Word & Excel), it takes anything from 30 sec - 1 min just to launch these apps. And equally slow while running Aperture (I am a photographer and this is my primary app). I usually end up restarting the iMac several times a day in the hope that it'll speed up. Every one who has seen me work on it has laughed that its slower than most ancient Windows machines.
    Over the past few months, with support from Apple customer service, I have reformatted, re-partitioned and reinstalled Maverics on the iMac (and my MBP, which has the same issues), and done everything else that apple normally recommends as routine procedure, but no improvement in performance. The Apple support person has now stopped responding to my calls or emails.
    What could be possible issues?
    In my system preferences pane, there is 'Flash player' and 'Java' in the non-system apps installed. I guess we cant do without either of these.
    Could there be a problem with my data? The data on my iMac is the same as on my MBP, as I transfered it via TimeMachine when i purchased the iMac.

    hi Here is the report from EtreCheck generated on my iMac. Any suggestions on what the issue could be and how to resolve it are welcome. There is 200+ GB free space on the 1TB drive.
    EtreCheck version: 1.9.11 (43) - report generated 4 June 2014 1:55:59 pm IST
    Hardware Information:
              iMac (21.5-inch, Late 2013)
              iMac - model: iMac14,3
              1 2.9 GHz Intel Core i5 CPU: 4 cores
              8 GB RAM
    Video Information:
              NVIDIA GeForce GT 750M - VRAM: 1024 MB
    System Software:
              OS X 10.9.3 (13D65) - Uptime: 0 days 0:55:33
    Disk Information:
              APPLE HDD HTS541010A9E662 disk0 : (1 TB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 999.35 GB (215.83 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. MacBook Air SuperDrive
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Gatekeeper:
              Anywhere
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist Support
              [loaded] com.adobe.SwitchBoard.plist Support
              [loaded] com.microsoft.office.licensing.helper.plist Support
              [loaded] com.oracle.java.Helper-Tool.plist Support
    Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist Support
              [loaded] com.adobe.CS5ServiceManager.plist Support
              [loaded] com.oracle.java.Java-Updater.plist Support
    User Launch Agents:
              [loaded] com.adobe.ARM.[...].plist Support
              [running] com.genieo.completer.download.plist Support
              [loaded] com.genieo.completer.update.plist Support
              [running] com.vladalexa.MagicPrefs.plist Support
    User Login Items:
              None
    Internet Plug-ins:
              AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
              FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
              Default Browser: Version: 537 - SDK 10.9
              AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
              AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
              Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
              QuickTime Plugin: Version: 7.7.3
              SharePointBrowserPlugin: Version: 14.0.0 Support
              JavaAppletPlugin: Version: Java 7 Update 55 Check version
    Safari Extensions:
              codec-M: Version: 1.0.0.1
              Evernote Web Clipper: Version: 5.9.15
              GoPhoto.it: Version: 1.10
              Omnibar: Version: 1.2
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
              CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
              Google Earth Web Plug-in: Version: 6.0 Support
    3rd Party Preference Panes:
              CleanApp Logging Service  Support
              Flash Player  Support
              Java  Support
              MagicPrefs  Support
    Time Machine:
              Mobile backups: OFF
              Auto backup: NO - Auto backup turned off
              Volumes being backed up:
                        Macintosh HD: Disk size: 930.71 GB Disk used: 729.70 GB
              Destinations:
                        Bhaven's 3TB [Local] (Last used)
                        Total size: 3 
                        Total number of backups: 12
                        Oldest backup: 2013-12-02 22:51:14 +0000
                        Last backup: 2014-04-26 20:48:37 +0000
                        Size of backup disk: Excellent
                                  Backup size 3  > (Disk size 930.71 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   1%          WindowServer
                   1%          PluginProcess
                   1%          fontd
                   0%          System Events
                   0%          imagent
    Top Processes by Memory:
              180 MB          WindowServer
              139 MB          com.apple.WebKit.WebContent
              123 MB          PluginProcess
              106 MB          mds_stores
              82 MB          com.apple.IconServicesAgent
    Virtual Memory Information:
              5.50 GB          Free RAM
              1.43 GB          Active RAM
              274 MB          Inactive RAM
              819 MB          Wired RAM
              365 MB          Page-ins
              0 B          Page-outs

  • Problem installing Windows 7 64-bit on late 2013 iMac 27"

    Is Windows 7 64-bit compatible with this computer?
    Hardware and software:
    • Late 2013 iMac 27", 3.5 GHz I7, 16 GB memory, 1 TB hard drive (no fusion drive)
    • Mac OS 10.9.1
    • USB thumb drive
    • Boot Camp Assistant 5.1.0
    • Windows 7 64-bit install disk iso image downloaded from Microsoft
    Install steps:
    1. Use Boot Camp Assistant to install Windows 7 install (from iso image) and Apple Support Software (creates WININSTALL USB drive)
    2. Use Boot Camp Assistant to create 50 GB Windows partition on iMac internal drive and start Windows install
    3. Complete initial install steps until given option to select install partition
    4. Select 50 GB partition. Error message that partition is not formatted correctly. Use Advance Options to format (presumably to NTFS)
    5. Select 50 GB partition again and click "Next"
    6. Get error message "Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information."
    7. Install quits at this point
    I have successfully installed Win 7 on another computer (2010 Mac Pro) using these steps. I also tried installation on the iMac using an iso image created from my original Win 7 64-bit install disk, with the same installation error as above.
    I'm wondering if Windows 7 and/or Boot Camp is compatible with this iMac. Any suggestions will be appreciated.

    I am awaiting delivery on the exact model you have and have been researching how much trouble it will be to put 64 bit windows 7 ultimate on my machine when it gets here. I'm not pleased at what I've been reading so far. I have not seen the two other posts but yours is enough to concern me.
    Have you also seen that 10.9.1 update may be responsible for this? I've seen where 10.9 caused some problems with the bootcamp app but then the process was completely hosed with the 10.9.1 update. Are you seeing this as well?
    Being a life-long mac dude, it pains me when their stuff just doesn't work because it usually just does. ****, that's why I started on a mac in the first place.
    The support site says that they come with 90 days of complimentary support. Is this not an issue they should be responsible for addressing via support? Or is that just one long wait on hold waiting to talk to somebody that won't consider this a pure apple issue?
    I was also curious if your install .iso contains both 32 and 64 bit versions?

  • Fusion Drive of late 2013 Imac

    Is the fusion drive of the late 2013 iMac a combination of a PCIe ssd and a HD or does it have a sata ssd?

    Apple - Press Info - Apple Updates iMac
    says it's PCIe

  • Installing Windows 7 on Late 2013 iMac w/ Fusion Drive

    Sorry in advance for the long post, but I have tried to exhaust all possibilities, and bring as much knowledge about our environment to the table to avoid confusion.
    Here's our goal:  Install Mac & Windows on a Late 2013 iMac with a 1TB Fusion Drive
    Install our Mac Image with Deepfreeze on Partition 1
    Install our Windows 7 x64 Image with DeepFreeze on Partition 2
    Here's why our goal cannot work out of the box:
    Deepfreeze for Mac, is not supported on a Fusion Drive. Now before anyone says "just don't use deepfreeze"...we are using it, and that is that.
    In order to get our existing image to work on the iMac, we had to split the Fusion Drive.
    Splitting Up the Fusion Drive
    We booted into Recovery, Opened up terminal, retrieved the LvGUID, deleted it, and split up the SSD from the HD.
    So now, we have a 128GB SSD, and 1TB HD showing up under Diskutilitiy.
    We then partitioned the 1TB HD, into two, 500GB Partitions. One for Mac OSX 10.9.4, and the other for Windows.
    The 128GB SSD is going to be used for scratch space, temp, etc. And is irrelevant at this time.
    Deploying our Mac Image
    After splitting the Fusion Drive, we netbooted and installed a "NetRestore" of our image. Worked completely fine, no issues. DeepFreeze Works fine, the 128GB SSD shows up just fine, and the other 500GB Windows Partition shows up fine. All drives / partitions can be written to with no problem.
    Deploying our Windows Image
    Deployed our Windows Partition image as we have done in the past, by booting into a windows PE Disk. (We have other various 2009, 2010, and 2011 iMacs across campus, with NO FUSION DRIVES installed, and dual boot them successfully using the same procedure. Minus the splitting of the fusion drive part of course) After the Windows image is deployed to the windows partition, we then boot it up to a Windows 7 Install disk to fix the MBR, Bootrec, and BCD options to allow it to boot properly. Here's where we run into issues: Upon getting the Windows 7 Install screen, the USB Keyboard and Mouse, DO NOT WORK.
    Here's the options we've tried to get them to work properly
    1. Tried another known working Mac USB Keyboard & Mouse = Failed
    2. Tried a known working Windows Keyboard & Mouse = Failed
    3. Plugged Just a known working Mac Keyboard into each USB Port to see if recognized = Failed
    4. Plugged Just a known working Windows Keyboard into each USB Port to see if recognized = Failed
    5. Plugged Just a known working Mac Mouse into each USB Port to see if recognized = Failed
    6. Plugged Just a known working Windows Mouse into each USB Port to see if recognized = Failed
    7. A Windows 8.1 Recovery USB will boot and the USB Mouse & Keyboard are recognized and installed! (YAY!!) However, we cannot repair a Windows 7 install with Windows 8.1..
    BootCamp Drivers & Support Media
    Downloaded the Current BootCamp Support drivers to enable the USB and other various drivers to be loaded during setup (Placed the $WinPEDriver$ and AutoUnattend.xml, and BootCamp folder on the Root of a USB, and modified a Windows7 Installation disk and placed on the root as well) The drivers do not load. Have also placed on a brand new USB2, and USB3 flash drive formatted at FAT32, to see if that made a difference, which it did not. The BootCamp USB made within Mac, it loads saying "Now booting into Boot Camp Assistant Created USB Drive..." or something like that (Don't remember the exact Message)
    Side Note:
    Restored Fusion Drive to its original State, and booted from the BootCamp USB drive, still no usb Mouse & Keyboard Support.

    I have same issue
    Tried everything differend hdd,ssd  as well
    Basically when trying instal win 7 via iOS maverick when reboting and windows booting to the first scree everything freezing cant do  much.
    Also tried install clear ssd without any system, but soon after format ssd or hdd I have error that I cant use this disk to install windows!!!!!!!!!!!!!!!!!
    What is funny Windows 8 installing without any problem!!!
    what is going on APPLE??wher is support
    This issue I have only on Late 2013 on my other Late 2012 this issue not exist and everything working as should.

  • Cannot install Windows 8.1 on Late 2013 iMac

    Attempting to install Windows 8.1 (retail) using Boot Camp Assistant but when I get to the "Select disk to install windows" screen, nothing appears.
    I'm using a retail copy of the Windows 8.1 full installer DVD and I have the midrange 21.5" late-2013 iMac.

    Installed my retail copy of Windows 8.1 from Windows 7 without any hiccups or hacks. Windows 7 can be installed in trial mode for free and easily by downloading a legal ISO from Digital River. Create a USB installation with Boot Camp Assistant and proceed as normal using the Windows 7 ISO. During Installtion, skip entering a license. After Windows 7 is successfuly installed, boot back into OSX and create just a drivers USB using Boot Camp Assistant. Boot back into Windows, insert your retail Windows 8.1 disc or use your download and let it install. Be prepared to do several "Hold-Option" boots to kick it into windows. Installation probably had 6 reboots.
    Digital River ISOs
    Windows 7 Home Premium 32Bit:
    http://msft.digitalrivercontent.net/win/X17-58996.iso
    Windows 7 Home Premium  64Bit:
    http://msft.digitalrivercontent.net/win/X17-58997.iso
    Windows 7 Professional 32Bit:
    http://msft.digitalrivercontent.net/win/X17-59183.iso
    Windows 7 Professional 64Bit:
    http://msft.digitalrivercontent.net/win/X17-59186.iso
    Windows 7 Ultimate 32Bit:
    http://msft.digitalrivercontent.net/win/X17-59463.iso
    Windows 7 Ultimate 64Bit:
    http://msft.digitalrivercontent.net/win/X17-59465.iso
    Thanks, and I hope this helps whoever needs it. I always hate when someone finds a fix and never reports back.

  • Cannot install Win 8 on a late 2013 iMac using bootcamp on 10.9

    I'm trying to install Win 8 on a late 2013 iMac (purchased a couple of months ago)
    I have a win 8 pro DVD, but obviously there is no DVD in this iMac. I usally use the DVD drive in my older 2009 iMac for any disk based installs but I can't appear to use it here.
    I followed the instructions and downloaded a Win 8 Pro ISO from Microsoft to use with my authentication code, created a bootable USB using bootcamp, created the partition and rebooted. Once I'd entered the code I get to the install location but it says I cannot install on the partition created by bootcamp. Even if I format the partition it says I need a GPT drive but I have MBR, so won't let me install.
    I tried several suggestions including creating aprtitions in various other programs and once I even got past that screen, but as soon as it tried to install I got another error saying the MBR was formatted incorrectly and it failed.
    I had no issues installing Win 7 via bootcamp on the older iMac, but this one has me stumped. I used to think I knew a bit about computers, but I'm fairly new to Mac related issues as the older iMac has always just worked.
    Any help would be greatly appreciated.

    Hello,
    I just installed Windows 8.1 on my Late 2013.
    There are just a couple of things I had to do that deviated from the Boot Camp Installation Manual.
    1.  I downloaded my copy of Windows 8.1 as an ISO image AND as a bootable USB from the Microsoft site.
    Not sure why I did that but it came in handy because Bootcamp was taking a very long time to copy the ISO onto the USB stick..
    The ISO copying seemed to freeze up, but it's likely that it was just taking a long time, probably 20mins.
    So, instead of waiting, I took the contents of the the USB startup stick and simply moved them over to the stick that Bootcamp had formatted for the ISO copy (I cancelled that copy function and deleted any files that had copied but didnt complete).
    Once that was done, the machine rebooted from the USB stick and began the normal Windows setup process.
    All went very smoothly except that my mouse was not working.
    2.     To get around the mouse issue, I simply plugged in a MS USB Mouse and it worked immediately.
    The Bootcamp manual advised that the way around this was to 'click in upper right corner and search for Bootcamp'.   Problem was, it was nowhere to be found.
    So, using my MS mouse, I navigated to the 'DESKTOP' icon in Win 8.1 and found File Explorer, which showed my USB stick connected along with Bootcamp and the MS Support File (i.e. All the Apple Drivers).
    I began manually clicking on all the driver files until realizing that there IS a Bootcamp executable which will automatically install the drivers for the Nvidia card, keyboard, camera, mouse, etc....
    Once that was done, my installation was completed.
    The entire process took about an hour, but now that I've done it, it really shouldnt take much more than 45 mins.
    I have the late 2013 iMAC, with the GTX780M and 1TB Fusion Drive i5 Quad Core.
    For those who are leery about doing this, please note that I'm a PC 'lifer' and this is my very first go-around with doing anything on an Apple product.
    It all went much more smoothly than I could have imagined, but if you are not a PC person, you might be a little challenged finding the Bootcamp in File Explorer or doing anything in Win 8.1 to get over these minor hurdles.
    Good luck!
    I'm looking forward to getting STEAM up and running to see how this thing games!

  • Will Late 2013 iMac boot from Snow Leopard External Drive?

    Hey gang-
    Got a new late-2013 iMac for Christmas (yayyyy!!)
    I plan on running Mavericks for day-to-day use, but there are a few old Power PC apps that I occasionally need to run. Does anyone know if the new iMacs will boot from an external drive running Snow Leopard? I have an external Firewire drive with Snow Leopard on it and I'm wondering if the new iMac will boot from it if needed.
    Thanks!
    Dave

    Thanks gang.   No worries- I keep an older Intel MacBook with Snow Leopard on it and I suppose it will do in a pinch.
    Cheers!
    Dave

  • I just bought the new late 2013 iMac.  Can I get the new iWork for free?

    I just bought a new late 2013 iMac.  Can I get the new iWork for free?  I updated it to Mavericks also.  The Mac App store is showing $19.99 for each iWork component (Pages, Numbers, Keynote).  I also bought the previous iWork version, if that matters.  Free updates for iPhoto and  iMovie seemed to show up with no problems.  Maybe these are just glitches that will clear up in a couple of days?

    Hi.  If you want it to get updated, this should take care of it.
    1. Uninstall iWork from your Mac.
    2. Do a fresh install of iWork from DVD.
    3. Install iWork update from Apple Downloads (direct link here:  http://support.apple.com/kb/DL1563)
    4. Sign into the Mac App Store, and check for updates.  It should now show up as a free update.  You may have to give it a few minutes (i.e. 10-15 minutes).
    I've been a Windows user for years, so I know all of the tricks by now.  I had hoped I would not need this knowledge for a Mac, but oh well...
    Good luck.

Maybe you are looking for

  • 7.1 Direct Link crash every time

    Mac 4,1 OS 10.8.2 AJA LHi card installed Created a new project in Premiere 7.1, added a 10 second ProRes clip to timeline - can't get it to direct link with Speedgrade without a crash.  Also tried with a Cinema DNGclip.  Since I see some staff member

  • Problem printing labels and envelopes from Address Book

    I am very frustrated by the impossibility, when printing labels or envelopes from Address Book, of including both an individual name and a company name on the label or envelope. The Address book will only print one or the other. When sending correspo

  • Interview Questions :: Correct questions to ask ?

    Hi, I just got off another Interview that I took & was disappointed once again. We are looking for mid-level Programmers who can write good code ( which would initiate good debates ) as well as "think" on thier own ( not just patch freely avaliable c

  • Select What You'd Like Restored?

    I've got a copy of Final Cut Studio 2.0 arriving in a couple of days, and I'd like to install it on top of a fresh OS install (probably the paranoid former PC user in me). My question is, using Time Machine, is it possible to restore just portions of

  • What is the latest Mac OS X that I can run on my 2.33 GHZ Core 2 Duo Macbook Pro?

    My MBP was running the fan almost constantly and otherwise acting odd so I decided to just refresh the installation from scratch. At that time I was running Lion 10.7.5. Before rebuilding everything with that version I want to make sure running Lion