No Audio Driver Code 52

Hello,
I came back from my High school class, and sat down to chill out after some tiring work.
I opened up my lid to find my audio driver was missing, I tried all the re installs but to no avail, and I didn't want to factory reset because important work. It was a Code 52 and 2 audio drivers in the control panel had a caution sign on it.
Help would be appreciated. 

Also, can you check the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE10318}
At that registry key, in the right window, is there, under "Name", either an UpperFilters or
LowerFilters value?
If so, for each of the UpperFilters and/or LowerFilters value, what is listed under "Data"?

Similar Messages

  • U530 Touch - Audio DRIVER ERROR - This device cannot start (Code 10) - Windows 7

    U530 - High definition audio device - ERROR - This device cannot start (Code 10) Windows 7, please see the picture
    Picture link (hosted on photobucket.com)
    I got all drivers up to date including the BIOS, everything is working fine (the sound works, microphone works...) but this error is kind of annoying to my eyes so if anyone know how to fix it please help.
    I tried to uninstall this and let windows update install it again => not worked, same problem.
    I tried to re-install the Realtek driver (uninstall - restart machine - install - restart machine) => same problem
    And another probelm which has not been solved yet is the Bluetooth icon keep blinking on battery mode (windows 7), you can see more in this thread

    What kind of reinmstall did you perform?  If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed.  Your list will be different than the following one, but this is only an example. 

  • Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

    Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

    Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

  • 9.1.3 crashing whilst recording "error code 1" audio driver problem

    I'm still smarting over a six hour location recording session that Logic ruined for me yesterday - came away with nothing because of this problem.
    Was trying to record a full band - eighth channels simultaneously, using ART Tubefire audio interface into Logic 9.1.3 on my macbook pro.
    It started out OK - no apparent problems when setting up, testing the mics, setting the levels, etc.
    Then as soon as we started trying to record proper takes of the songs, Logic seized up, giving the reason as "error code 1" being returned by the audio driver. this would happen after about half a minute or so of recording apparently normally (sometimes a bit longer, sometimes a bit shorter). It would also give me another error message about the disk being too slow sometimes as well.
    I tried adjusting various settings and preferences (sample rate, buffer size, internal or external clocking, etc. etc.) but nothing worked.
    I restarted the computer and the audio interface. No change.
    Then I tried recording fewer tracks simultaneously (although the computer really should be able to cope with a pretty simple 8-track set-up, as indeed it has done quite happily in the past) but that made no difference either.
    Then I disconnected the firewire connection and tried to see if I could at least record some audio straight into the computer, connecting the headphone out of the Tubefire to the macbook's built-in mic jack. Same problem.
    I don't know how to fix this.
    Help please?
    Thanks,
    Mark

    Everyone I know is having issues with Logic 9 and Snow Leopard. If you can, try using Logic 8 and OS 10.5.8 works well for me. 32 tracks for 2 hours. It absolutely will not work if I use a laptop with Snow Leopard.

  • "error code-39 with core audio driver"

    so I have a 75 minute continuous dj mix I recorded onto garageband... after having recorded this I then converted the file from a 120bpm to a 60bpm speed so as to fit it all in... now, however, towards the end (between 65-70 minutes into it) the mix suddenly is interuppted by a crude digital-type sound. a pop up then says "error code-39 with or in core audio driver"....
    what gives here?
    I'd appreciate any help you can give.
    peace.

    does this mean I have to re-record the audio file?
    Probably. I guess you could try a commercial disc repair program like TechTool Pro or Disk Warrior, but odds are if the file system can't figure out where the end of file is, the file is hosed --Hang B-(>

  • Audio driver error, code 10 error & Media device missing Error in Presario C772TU

    Hello Hi to all,
    I am Manikandan.D working in BOSCH India and new user for this forum.
    I am having presario C7712TU model laptop, recently i reinstalled my Xp OS service pack 2.
    after that i reinstalled all drivers, but it showing some error in audio device driver.
    the error code is 10 and it is telling "media device missing"
    I have installed UAA driver + conexant HD audio driver
    Moreover i couldnt find any wireless LAN icon in network connection tab.
    could any body help me..Since i am in Germany..Now helpless!
    it is big trouble for me!!!
    Many thanks in advance to all!

    Dear Daniel,
    Thank you very much for your reply and effort, help!
    Yesterday i have installed Atheros driver...Now my wifi also turned on without any problem.
    I think you doing great job for all the people. keep the same spirit and continue the support!
    this has to be appreciated! why because some people they will break the head for the system problem.
    you are giving solution for the headache not for the system!!!
    anyways now my problem is solved thanks...!
    if possible send me your mail id to the below address.
    <text deleted for privacy>
    i will keep in touch with you!
    Message Edited by WendyM on 10-21-2009 07:04 AM

  • Error Code -39 was returned by core audio driver

    Error Code -39 was returned by core audio driver.
    Does anyone know what that message means?
    Thanks.

    When did you see it?
    (It's an EOF error)

  • Error code 1 was returned by the audio driver :(  randomly!

    hey all! ive been getting this messege "error code 1 was returned by the audio driver" almost every time i try and merge tracks, bounce track in place, bounce region in place, or mixdown stereo regions per tracks. NOT when i do a real song bounce though. i feel like im noticing my computer is taking a long time to copy audio files into logic projects...i dont know if they are related though. but this error code 1 thing has been hapening CONSTANTLY. the thing is...nothing has changed. i havnt installed or changed anything on my system. its happening on ALL of my old projects, and MOST of my new ones. ive tried disabling all third party AUs and it still happens. do i have bad ram? a bad drive? do i need to reinstall everything? thanks so much in advance!

    Ok, I don't know if this solves your problem... but as for what was triggering the 'Error code 1' message on my computer... Here's the update.
    After much troubleshooting, the cause of this error in my setup was the Highpoint RocketRaid 2314 eSata PCIe card.
    The Highpoint RocketRaid driver is included in OS X 10.8 with no additional drivers / installers to run. However, it isn't compatible with the old driver when upgrading the kernel (ie. 10.6 - 10.8)
    I was bouncing to an external drive connected through eSata to the RocketRaid PCIe card... error message. Time Machine backup connected through eSata... error message. The drives were being dismounted rudely, or losing connection momentarily and reconnecting, resulting in the error messages.
    Here are the instructions from Highpoint tech support to manually uninstall the embedded driver, and then reinstall the old Snow Leopard driver for use in Mountain Lion (10.8)... which works as it's suppposed to.
    1.  Go the folder System > Library > Extensions >, look for the file HighPointRR.kext and delete that file.
    2.  Second, download the driver from the link below, then run the Un-install script to remove any previous installed driver.
    http://www.hptmac.com/productfiles/bios_driver/hptrr-mac106-driver-v11...
    Then re-install the driver, but do not reboot or restart the system.
    3.  Third, download the webGUI from the link below. And run the un-install script to remove any previous installed web GUI.
    http://www.hptmac.com/productfiles/WebGUI-Mac-v168-091120.dmg
    Then re-install the web GUI and reboot after installation is complete.
    Once the system has booted up, open a browser and type URL to log into web GUI.
    http://localhost:7402
    User Name: RAID
    Password: hpt
    I hope that this helps someone!

  • Error Code 1 was returned by the Audio driver

    Whenever I try to export a podcast to MP3 - using good quality, I get multiple errors. A little box pops up saying "Error Code 1 was returned by the Audio driver".
    In the saved file there is a short one second pause wherever that particular error has shown up.
    Has anyone experienced this error and knows of a solution? I am utterly clueless, not very experienced with Garageband at all...
    Thank you in advance!

    I'm getting this too, for the first time. I've got a project that I've used to publish a monthly podcast with and I've been opening, editing, and saving this project for a couple of years now.
    Now, with GB '09, I'm getting this error. Not pleased.

  • Error Code -1 Returned by core audio driver-Please help!

    I can't open GB3, each time I try, it gives this message error: Error Code -1 Returned by core audio driver
    What can I do?
    Intel 2.16, OS: Leopard, and I use Guitar Rig 2 which work fine.

    There is no such thing as a G5 Intel.
    Error -36 is an "I/O error", could mean a lot of things, you should give more details:
    • Does this happen during recording or playback?
    • Does it happen again if you re-open the project/re-start GB?
    • Does it happen with other projects too?

  • "error code -1 was returned by the core audio driver" battery multi?

    working on a track with NI's battery 3 loaded as a multi, eveyrthings fine. next day come to open the project and i get the following message:
    "error code -1 was returned by the core audio driver"
    everything is fine with the project except that in the channel where battery is loaded, the plugin name (where you insert the plugins) has a line strike through it, and the GUI wont open when you double click it?
    i tried re-loading the plugin as a multi instrument but get the same error message, but it loads fine as just a stereo or mono plugin.
    any ideas??
    thanks in advance.

    I just did a search using "search discussions" using the term:
    "-50"
    (use the quotes, because they're important when doing this kind of search)
    It returned a lot of hits, and apparently you're not alone in wondering what this error means. Lots of people reporting it as an error in iTunes, and also something related to 10.4.9. But in the event no one here answers your question, I suggest you do the search yourself, slog through the results, and see if anyone's come up with an explanation that fits your scenario.

  • Error Code -36 Returned by core audio driver-Please help!!!!

    8:03 into my new song and all of a sudden I get a pop up that says "error code -36 was returned by the core audio driver" I click it off and the track continues to play looping 3 seconds of the same thing over and over again as the track continues over what should be correctly playing.
    This is in garageband 08' on an up to date G5 intel with plenty of space and NO locked tracks. I also ran disk utility and nothing has helped.
    Any idea what is happening and how to save my song?
    Thanks for any help!
    Message was edited by: Howard Herrick

    There is no such thing as a G5 Intel.
    Error -36 is an "I/O error", could mean a lot of things, you should give more details:
    • Does this happen during recording or playback?
    • Does it happen again if you re-open the project/re-start GB?
    • Does it happen with other projects too?

  • Error code -36 was returned by the Core Audio driver.

    Hi; am receiving this error...
    Error code -36 was returned by the Core Audio driver.
    ...but am not finding any info about it or how to fix/update the driver. Anyone have this error before?
    thanks, Charlie

    There is no such thing as a G5 Intel.
    Error -36 is an "I/O error", could mean a lot of things, you should give more details:
    • Does this happen during recording or playback?
    • Does it happen again if you re-open the project/re-start GB?
    • Does it happen with other projects too?

  • Every time i launch garageband i get this message "Error code 28773 was returned by the Audio driver."

    HI. I just got a new macbook pro 15".
    every time i launch garageband i get this message
    "Error code 28773 was returned by the Audio driver."
    when i hit record, the shaded area in GB starts to advance, but it doesn't record any sound, and when i hit the space bar, the recorded area disappears.
    anyone know how to fix this?
    I have installed BOOM, but i think that's the only extra sound software i have.]
    PLEASE HELP!
    thanks,
    mojoman22

    Please read this whole message carefully, especially the warnings, before doing anything.
    1. The changes to your configuration suggested here should be considered provisional; they may not solve your problem, or they may remove functionality that you find useful. If a third-party system modification that you want to keep is causing the problem, seek help from its developer.
    2. WARNING: Back up all data now if you haven’t already done so. Before proceeding, you must be sure you can restore your system to its present state, even if it becomes unbootable. If you’re not sure you can do that, STOP — DON’T CHANGE ANYTHING. If you’re dissatisfied with the results of the procedure suggested below, restore from your backup. I will not be responsible for the consequences, and I will not be able to help, if you ignore this warning.
    3. You should either remove or update the following system modification(s), if an update is available from the developer:
    Parallels
    and definitely remove at least the following:
    Boom
    † MacKeeper
    † VirusBarrier
    4. Whatever you remove must be removed completely, and (unless otherwise specified in this message) the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job. I can't be more specific, because I don't install such things myself. Please do your own research.
    Here are some general guidelines to get you started. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
    Again, please don't ask me to do this research for you. You can do it better than I can, because I haven't installed the product and I may not even know what it is.
    If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.
    5. I recommend that you never reinstall the modifications marked with a dagger (†) above, if any. If your problem is resolved after uninstalling all the above modifications and rebooting, but you still want to use some of those not marked with a dagger, you can experiment with putting them back, one at a time, testing carefully after each step. Keep in mind that system modifications may be incompatible with each other or with future OS X updates, so it may not be clear which one is at fault.
    6. If you still have problems after making the suggested changes and rebooting, post again. Remember: if you don’t like the results of this procedure, you can undo it by restoring from the last backup you made before you started.
    Remove the "MacKeeper" crapware as follows.
    Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions, nor do I intend to repeat the test.
    IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
    In the Finder, select Go ▹ Applications from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. A dialog will pop up asking why you want to uninstall it. You don't have to provide that information. Enter anything you like in the text box, then click the Uninstall button. All the functional components of the software will be deleted. That's the only useful feature of "MacKeeper:" it deletes itself. Reboot.
    Do not try to uninstall by dragging the MacKeeper icon in the Dock or the LaunchPad to the Trash.
    Here are some general suggestions. If you want your computer to be usable, don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” “extenders,” “cleaners,” “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this kind of material is useless, or worse than useless.
    The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
    The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it.

  • Error code 25974 was returned by the core audio driver?

    hello, well ive been having a problem trying to record one of my dj sets directly from my mixer.
    This is my set up: My dj equipment is conected via my mixer to an m-audio ozone midi keyboard (1 stereo in 1/4 TRS jack), this keyboard is connected via usb to my computer (imac g4), and im using logic express 7.0.1 as my recording software.
    When i start recording, everything is working ok, i can see the signal on my
    m-audio keyboard, and i can see the signal on logic, on one of the audio tracks.
    But then, logic gives me an error message:
    "error code 25974 was returned by the core audio driver."
    and then the signal goes out, and i cant finish my recording session. The portion of the recorded set until the error, is perfect, but i need to be able to record the whole session.
    i hope i made my self clear. any help!!! thanks a lot
    Imac G4   Mac OS X (10.4.4)   1 g ram

    I just did a search using "search discussions" using the term:
    "-50"
    (use the quotes, because they're important when doing this kind of search)
    It returned a lot of hits, and apparently you're not alone in wondering what this error means. Lots of people reporting it as an error in iTunes, and also something related to 10.4.9. But in the event no one here answers your question, I suggest you do the search yourself, slog through the results, and see if anyone's come up with an explanation that fits your scenario.

Maybe you are looking for