No audio during editing

This is probably a stupid setting, but I can HEAR the audio while I edit. I know my speakers are hooked up properly because I HEAR everything else. I know the audio was captured. I tried to put bars and tone at the beginning but NOT tone. Is this something easily corrected?

Yours has to be one of the most confusing posts I've read in a while so bear withme if the following seems simplistic.
If you are monitoring your audio & video through firewire out to a DV/Analog converter (aka camera, canopus, VTR) then on to the speakers ....
In FCP, on the Menu Bar, select:
View>Refresh A/V Devices
then
View>Video Playback>Apple Firewire Out
then
View>Audio Playback>Audio follows video
If you are NOT monitoring your audio through firewire but using speakers connected directly to the audio out of your computer
Then, on the Menu Bar select:
View>Audio Playback>Built in audio
Have fun.
x

Similar Messages

PS cs4 extended...audio during editing... No audio in rendered video clips playback??

Hi I am running Cs4 Extended using PS on a 64 Bit Win 7 computer. I am able to import video and edit it and the audio is there while editing. But no matter what I do when rendering the video clips I get no play back audio just the video. I just loaded onto this new computer I know I did video on my old computer with no problems. is there a default setting that is blocking the audio to be rendered with the video. Thanks for any help.

OK so I took the edited PS video file from my new computer and saved it over to a Drive, then opened the same PS file onto my older 32 bit computer.
I made no changes to it at all and just did a RENDER VIDEO.
it has the sound from that computer. This tells me it is a very simple problem somehow can any one tell me what to try. Thanks for any help.

Soundtrack Pro corrupting audio files during editing

Using S'trackPro 1.1 on both G5s and Mac Pros, I've experienced a recurring issue when editing long audio files (16bit 48Khz aiffs of 60-120 min durations).
Import files directly in Audio File edit mode, usually apply a limiter and/or normalize and save with new file name. I often find as I move around the waveform to preview results, the playback stops responding accurately, playing the wrong part of the file randomly.
Once saved, the file seems to have random "splurts" of audio appear in inappropriate places throughout. For example, a 2 sec "splurt" from the middle of a 120 min file may appear 10 minutes before the end, seemingly at random.
It's odd that I've experienced this on numerous machines, all with quite different specs.
Any suggestions appreciated.
3 x G5 Dual 2Ghx 2.5Gb RAM, Mac Pro Quad 2.66 5Gb RAM Mac OS X (10.4.9)

I actually use the 'save as' function that consolidates all the audio clips and move them onto a separate drive. I'm doing a lot of large projects that have more clips than are actually used. Consolidation means I can move and work on another machine. And in the end it's easier to archive this single directory of files. Works for me, especially because sometimes the audio sources are scattered in too many places on my system.

Unable to monitor audio during capture

I'm using FCP6 to capture footage shot with a JVC GY-HD100U at HDV 720p24. I'm using a JVC BR-HD50 deck to capture from, connected to my MacPro 3 GHz quad via firewire.
In the Audio/Video Setting dialog box, the Sequence Preset is "HDV 720P24". My Capture Preset is "HDV", Device Control Preset "HDV FireWire". Video Playback shows "[Missing] Apple Firewire NTSC (720 x 480)" and offers only the options of None and Digital Cinema Desktop Preview–Main as alternate choices. Both HDV options are greyed out. The Audio Playback option is set to Default.
With this setup, controlling the deck remotely from the capture window, I get video but no audio. The only audio I get is when the deck is connected to my video monitor and I use it to monitor the output of the deck. The audio is there when I play back the clips after capture but I cannot monitor the sound with the computer's speakers. If I go to the A/V Devices tab, under Video, it shows the same "[Missing] Apple Firewire NTSC (720 x 480) with the same choices described above, and the Options button next to it doesn't do anything.
Can anyone think of anything I've missed in the initial setup?
Keith
Message was edited by: Keith R Thompson

Keith,
For whatever reason (perhaps the intense processor needs) HDV does not allow you to monitor your audio during capture. The computer just will not do it. What I have done, if I really want to hear what's happening durning capture, is plug my speakers into the headphone jack of my XL H1. Due to the processing that's going on, the audio "lags" behind the video by a couple of seconds.
I'm pretty sure this is not a setup problem, but just a limitation due to the nature of your format.
Hope that helps!
~Luke

No Audio during Log and Capture

Hello, I have FCP 6.0 and am unable to hear my audio during log and capture. I have this problem on all 5 G5 Macs that I have, and have tried different editing docks and cables. I have used FCP for more than 5 years and have never had this problem. iMovie has audio during capture, so I am convinced that there is a pre-set in FCP that I don't have checked properly, but I've been over them many times and still have no answer. I searched past forums and didn't really find anything helpful to me.
My pre-sets are set to DV NTSC 48kHz and the playback pre-sets are set to default. I can hear audio of my clips after I log and capture, but I still need to hear audio during importing. I'm more confused than anything. If anybody has had this problem before or any suggestions for me, I'm all ears.
Thanks.
John

... as Bogie says.
However... this is a non-feature that dates back to slower CPU days... yet, still with all the different formats and such I (ME!!) I believe it's still good practice to leave it off.
Devoting as much CPU work to the capture process lessens the chance for something to go wrong. You can easily monitor the audio directly out of the deck as needed.
Sure -- octo cores need 30 apps open just to get your money's worth and I'm sure you won't have any issues using an 8th of one to send audio thru itself while the other 7 and 7/8ths are used for capture... but who wants to risk it?
Not me... I'm to old to change my ways.
Blast you FCP v1.2.5 on a beige G3 with 7gig and 15gig hard drive -- you taught me well.
CaptM

Why no audio during screen capture in quicktime pro

why no audio during screen capture in quicktime pro?

Verify that your Mac has the right Input selected by default > OS X Mavericks: Adjust your computer’s sound input
Then, give this a try -from Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files - Apple Support
ÇÇÇ

Adobe Premiere CC 2014 - droping audio during multicam

Hello all,
I have an issue with Premiere CC's multicam and it seems to be dropping audio during switching of cameras in mutlicam. I have not figured out what causes this since it only happens about 4 times per one hour clip, totally random. Now I don't see any wrong settings, but with expanded view I also see that the waveform is missing:
Any ideas on how to get the audio back, not sure what happened but any ideas are appreciated. I have already re-rendered the audio so I'm guessing it's not a cache problem. The audio is a direct input from the mixing table and is full with no breaks through the video.

OK I have finally figured it out. Apparently the bug occurs if you "refix" the multicam. Example I was not happy with the selected camera went back and reedited it. Premiere then becomes a 62yo cafeteria lady, whom is 1 month away from being retired and a kid says he doesn't eat a certain food and she just fixed everything up and serves him.
What happens is the 1st time around I used example camera 1, did not like what I was seeing went back switched to camera 3, Premiere switched the audio to Camera 2. It always chose the third audio that wasn't the video (Example nr. 2: I used camera 3 switched to camera 1 Premiere selected the audio of camera 2). I've set the multicam to use only Audio Track 1 and the rest are all nonexisting, since I wanted to use only the audio that was a direct input from the mixing board not from the mics on cameras, that is why the drop happened. Now why Premiere does this is anybody's guess, but the way to fix this is to simply go to the parts where there is no audio clicking on the audio while holding ALT, going to Multi-camera and choosing the right audio source, as you can see from the screenshots below.
Of course there is one problem left unsolved and that is how to prevent this from choosing a random reedited multicam clip when you turn off or restart your computer, simply put you cannot. So my advice for anyone looking to solve this is 1st find the clips that are problematic then change the audio sources, and just make the encode. Other than that it can be solved with a little fix, just replacing the audio in the original sequence with the one you want for every camera, but then a 1-2ms buzzing noise comes in whenever you change cameras in my case working on a rock concert where mostly the camera changes every 3 sec it starts to sound like a bee hive in a matter of minutes, and I have no fix for that at the moment.

How to show Append Changes previous value in text box during edit

Hi,
I am using multi text column with append mode, all feature of append mode is working fine,but when any other field has been changed on that time append text box take blank value.
when using same list with ssrs ,report shows the current data,but after approved by manager current item change in blank and current data come in history.
is any way to do ,if any body change the any item same data appear during edit time in same column.
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Hi Hasan,
According to your description, my understanding is that the multi text column with append mode is not working fine in your SharePoint 2010.
For reproducing your scenario, I created a new custom list , turned on its version feature and added a multi text column with append mode. But it was working fine when I change the values of both the
multi text column and other columns.
For your issue, could you create a new list to verify the multi text column with append mode works correctly.
Best Regards,
Eric
Eric Tao
TechNet Community Support

NO AUDIO DURING PLAYBACK ON TIMELINE

Ever since I tried using the Narration tool in Premiere Elements 12, I have had nothing but problems with audio. The narration tool itself cause Premiere to crash. I decided not to use it again, but I continue to have problems. I can hear audio in the clips when i play them through the source monitor, but if I drop it on the timeline, then there is no audio during playback. I've already checked my audio output settings and I've already tried restarting Elements and my Macbook. I've even tried to change the audio output devices just to make sure I didn't screw it up when trying to activate the microphone for narration. Please help!
*NOTE - this is only a problem in the current project. When I made a new project, it played back fine. The problem is that I have hundreds of assets that I've renamed with descriptive file names, as opposed to the formatted file name the camera gave them.

Good morning Steve.
Yes, there is a waveform on the clips. However, when I open Audio Mixer, I do not see any audio registering.
Also, I do not have a USB microphone plugged into my computer.
Finally, I have done the Audio Hardware check. I have tried using both "Built in Output" and "System Default Input/Output" but neither works.
Not sure if it helps to know this, but I have also tried to add music files to both Audio 1 track and also Soundtrack track. Neither one will play back audio on the timeline, even though I can clearly see the waveform on the file. It also does not register on the audio mixer. This tells me that it;s definitely an issue with this specific timeline. Is there any setting or mute button I may have accidentally changed? None of the mute buttons are checked off in the audio mixer.

NO AUDIO during playback after converting the VIDEO using Creative Video Conver

I have a ZEN 2GB/4GB/8GB/6GB/32GB.
I tried to convert video from a dvd using Creative Video Converter.
The video is fine but there is no audio during playback.
What am I doing wrong?

"If this is the case, the original video file may be in a format that contains muxed (multiplexed) audio and video, and cannot be exported with audio."..."If the format is "MPEG1 Muxed" or "MPEG2 Muxed," the audio portion of the file may not be retained with QuickTime Pro or iMovie."
I have read that article and I thought it ment that the sound will work after you convert to the MPEG4 format, which I did.
Are you saying that if it starts out as "Muxed audio" then there is no way to convert it?
If that is the case then in what situation would you need to use the Videora Converter?
Thanks,
Sean

No audio during calls

iphone 4 just replaced because it would not charge and now i have no audio during calls all other sound works fine was doing the same on ios 5(what the phone came with)

just did hard restart still no fix

FCP quits during editing

*Hi, FCP keeps quitting during editing. usually when playing the timeline.*
*Anyone knows what's causing it?*
Process: Final Cut Pro [354]
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCutPro
Version: 6.0.5 (6.0.5)
Code Type: X86 (Native)
Parent Process: launchd [84]
Date/Time: 2009-03-03 12:22:54.713 +0800
OS Version: Mac OS X 10.5.6 (9G55)
Report Version: 6
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
Crashed Thread: 83
System Configuration
:Model: iMac7,1, BootROM IM71.007A.B03, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB
Graphics: kHW_ATIr600M76Item, ATI,RadeonHD2600, spdisplayspciedevice, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.38.24)
Bluetooth: Version 2.1.3f8, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD5000AAKS-40TMA0, 465.76 GB
Parallel ATA Device: OPTIARC DVD RW AD-5630A
USB Device: Keyboard Hub, (null) mA
USB Device: Apple Keyboard, (null) mA
USB Device: My Book, (null) mA
USB Device: My Book, (null) mA
USB Device: Built-in iSight, (null) mA
USB Device: IR Receiver, (null) mA
USB Device: Bluetooth USB Host Controller, (null) mA
Thread 83 crashed with X86 Thread State (32-bit):
eax: 0xffafd401 ebx: 0x6714668d ecx: 0xffafd400 edx: 0x00000000
edi: 0xffffffa3 esi: 0x00000000 ebp: 0xb0d47068 esp: 0xb0d4702c
ss: 0x0000001f efl: 0x00010212 eip: 0x6713d098 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0x00000000
Binary Images:
0x1000 - 0x75cfe8 com.apple.FinalCutPro 6.0.5 (6.0.5) /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
0xb23000 - 0xb26fe0 +KGCore ??? (???) /Applications/Final Cut Pro.app/Contents/Frameworks/KGCore.framework/Versions/A/KGCore

Since I don't know what a lot of these crash reports really mean I can only guess. However I see it reporting MyBook on a USB port. FCP wants firewire for external drives.
Try that, repairing permissions and resetting FCP prefs tho I suspect it's the drives on USB. try that first

Aperture corrupting images during editing

Hello,
Starting a few days ago, aperture started corrupting images during editing. This was normally at the time of my fist cut, going through doing simple straighten and croping. Sometimes it would happen when doing a small lighten or darken of the exposure. I purchased a new MacBook Pro about a month ago but this only started happening this week. No OS or Aperture upgrades this week. I did have a crash earlier this week and after the crash my Spotlight re-indexed my computer. I updated QuickSilver this week and Awaken. I tried quiting both QS and Awaken but problem still happens. The real scary thing is I usally have to go back and re-import the raw CR2 image to fix the problem, doing an update from master or resetting all adjustments does not fix the problem. Below is an example of an image with the problem. This is a Version Export of a corrupted image, as you can see the cor Can I get any help?

Ernie Stamper:
The Aperture Libraries are on the local drive. I do have an external Firewire drive I can use to test your theory but since I recently replaced the whole laptop at the Apple store so I am thinking it is not hardware related but one of three things: an Aperture bug, my configuration, or memory (see more on memory below).
leonieDF:
I don't think it is related to a hardware issue unless it is memory. I took the laptop into the mac store because I was having a hardware issue not discussed in this thread. The laptop was completely replaced except for the memory since I purchased 8GB of memory after the computer was purchased. I put the 8GB memory back into the new laptop. If this is a memory problem it is not showing up in diagnostics. I am planning on doing two things this weekend. First thing is putting back in the original apply memory and testing. If I still get the issue I am going to do a complete uninstall of Aperture and re-install maybe something in my settings/libaries are corrupted. I am reaching for straws at this point. I might also try a complete reformat and only install Aperture and test to see if something else installed might be causing this, but I can't think of what it would be.

Freezing, Application Ending while using PSE 12 during editing.

Good afternoon, I'm using PSE 12 and the application keeps on freezing and ending during editing. Just purchased a new MAC laptop that is running Yosemite 10.10. Any advice? Thank you in advance.

CSanchez98
If your program is Photoshop Elements 12, you have posted in the wrong forum. Your thread has somehow been posted in the Adobe Premiere Elements Forum (video editing).
Please repost your thread in the Adobe Photoshop Elements Forum
https://forums.adobe.com/community/photoshop_elements
or wait for a moderator here to see your thread here and move it from here to there.
Much has been written about Photoshop Elements 12 on Mac Yosemite 10.10 and the good people in the Adobe Photoshop Elements Forum should be
able to advise you with the best information possible on this matter.
ATR

Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

Well!
If you have ThunderBolt, I would go with such for an External Working Drive, spinning platter or SSD depending on your budget
This does not have to be huge just big enough to house your most current Jobs
Once the Current Job is put to rest I would move it to a larger multi bay hard drive unit, USB or FireWire nothing fancy, no RAID, set up as one single Disk
This would only be accessed when something is needed from a past Job so the connection does not have to be speedy
The Drobo would be relegated to Vaults and backups
You can set up a Vault on the Drobo to back up the External Working Library and then Reconnect it when you have moved the Library over to the other Enclosure
This has worked for me pretty smoothly for a long while, but I have found over the years that one can not assume all people work in the same manner! :-)

No audio during editing

Similar Messages

Maybe you are looking for