No audio during fast playback.

FCP stopped playing audio during fast playback. The audio plays fine while playback is at normal speed, but once I speed it up the playback is silent. Other people use this computer, so they might have changed a setting that I am unaware of. Help is appreciated.
Jens

Turn on Scrubbing in the view menu...
Jerry

Similar Messages

No audio during fast forward

I'm using FCE 3.5.1 and all of a sudden I wasn't getting any audio during fast forward. The level indicators weren't moving either. I'm not sure if i inadvertently hit a hot key that turned them off or what. Does anyone know how to turn these functions back on or is this some kind of a software glitch?

Quit the application and trash your preferences.
http://www.fcpbook.com/Audio2.html

No audio during fast-forwarding in Quicktime

I recently updated to v. 10.10.3 yosemite. While playing a lecture in Quicktime, when I fast forward it no longer gives audio to allow me to listen to the lecture a little quicker. Can this be changed so that when I fast forward the audio can still play?

I recently updated to v. 10.10.3 yosemite. While playing a lecture in Quicktime, when I fast forward it no longer gives audio to allow me to listen to the lecture a little quicker. Can this be changed so that when I fast forward the audio can still play?
The QT X FF/FR playback features have been altered. FF/FR at 2x, 5x, 10x, 30x, and 60x are without audio. FF/FR at 1.1x thru 1.9x in 0.1x increments is with audio when holding down the "Option" key while pressing the FF/FR control buttons. QT 7 offers FF/FR with audio at 2x and 3x (less dropped frames) using the "L" and "K" keyboard shortcuts. VLC offers forward and reverse playback with audio in frame rates from 0.25x to 4x using the slider control with increments that vary proportionally with the slide control's current position.

NO AUDIO DURING PLAYBACK ON TIMELINE

Ever since I tried using the Narration tool in Premiere Elements 12, I have had nothing but problems with audio. The narration tool itself cause Premiere to crash. I decided not to use it again, but I continue to have problems. I can hear audio in the clips when i play them through the source monitor, but if I drop it on the timeline, then there is no audio during playback. I've already checked my audio output settings and I've already tried restarting Elements and my Macbook. I've even tried to change the audio output devices just to make sure I didn't screw it up when trying to activate the microphone for narration. Please help!
*NOTE - this is only a problem in the current project. When I made a new project, it played back fine. The problem is that I have hundreds of assets that I've renamed with descriptive file names, as opposed to the formatted file name the camera gave them.

Good morning Steve.
Yes, there is a waveform on the clips. However, when I open Audio Mixer, I do not see any audio registering.
Also, I do not have a USB microphone plugged into my computer.
Finally, I have done the Audio Hardware check. I have tried using both "Built in Output" and "System Default Input/Output" but neither works.
Not sure if it helps to know this, but I have also tried to add music files to both Audio 1 track and also Soundtrack track. Neither one will play back audio on the timeline, even though I can clearly see the waveform on the file. It also does not register on the audio mixer. This tells me that it;s definitely an issue with this specific timeline. Is there any setting or mute button I may have accidentally changed? None of the mute buttons are checked off in the audio mixer.

NO AUDIO during playback after converting the VIDEO using Creative Video Conver

I have a ZEN 2GB/4GB/8GB/6GB/32GB.
I tried to convert video from a dvd using Creative Video Converter.
The video is fine but there is no audio during playback.
What am I doing wrong?

"If this is the case, the original video file may be in a format that contains muxed (multiplexed) audio and video, and cannot be exported with audio."..."If the format is "MPEG1 Muxed" or "MPEG2 Muxed," the audio portion of the file may not be retained with QuickTime Pro or iMovie."
I have read that article and I thought it ment that the sound will work after you convert to the MPEG4 format, which I did.
Are you saying that if it starts out as "Muxed audio" then there is no way to convert it?
If that is the case then in what situation would you need to use the Videora Converter?
Thanks,
Sean

IDVD slideshow DVD pauses video and audio during playback...messages about sleeping DVD player

I have just burned a slideshow on iDVD from iPhoto book project. During playback, the DVD player pauses with photo visible and audio stops for same time, and then resumes after about 5 seconds. I thought the MP3 (purchased from Amazon because it was not in iTunes) format may have been the issue, so, I converted to AAC, and rebuilt slideshow from scratch using AAC music. During Preview playback, the problem does NOT exhibit...only when played from produced DVD on both computer or DVD player. I only have this one pause at same time on every DVD burned. Is AIFF a probable solution? I saw a message saying DVD player "Sleeping" or "DVD player waked from sleeping" at beginning and end of this pause.

Whoa!!! I'd back up here and make sure you have your "T" s crossed before your continue with 10,000 discs! What were your bitrates for the main track and Bonus features? Did you use AC3 audio? DVD has a bitrate ceilings of 9.8 for video. Its also important you check your bitrates in a viewer to makes sure your OK.
Bitrates are the most crucial part to control in DVD.
http://www.videohelp.com/tools?toolsearch=bitrate+view&Submit=Search&s=&orderby= Name&hits=50&convert=&dvdauthorfeatures=

No audio during playback

Hello all, I am extremely consfused as to what is wrong with the premiere pro settings. I have a blackmagic intensity pro installed. I can use it just fine to capture video. No matter what audio files or Videos I use, the audio meters show audio during playback, but my speakers are not playing anything. I have searched for a solution. My only guess is that the program is pointing audio to the blackmagic intensity pro and not to my audio card. Any suggestions?

I talked to Blackmagic about this problem and was told that they could only guarantee audio/video sync if their output was used so their presets only let you do this. With the Decklink studio this is a bit of a pain if you are working in 5.1 as there are only 4 analogue outs, I had to build a rack of D to As to get my monitoring working.
Richard Knight

No audio during playback Premier Pro CC

I'm having a problem hearing audio during playback. The audio indicater moves up and down, but there is no sound. I already downloaded and reinstalled 3 times, to no avail. I'm using Windows 7. Could anyone help?

Here is a screenshot of the audio preferences.Audio device is Realtek high definition audio>. I'm using desktop speakers.

Unable to monitor audio during capture

I'm using FCP6 to capture footage shot with a JVC GY-HD100U at HDV 720p24. I'm using a JVC BR-HD50 deck to capture from, connected to my MacPro 3 GHz quad via firewire.
In the Audio/Video Setting dialog box, the Sequence Preset is "HDV 720P24". My Capture Preset is "HDV", Device Control Preset "HDV FireWire". Video Playback shows "[Missing] Apple Firewire NTSC (720 x 480)" and offers only the options of None and Digital Cinema Desktop Preview–Main as alternate choices. Both HDV options are greyed out. The Audio Playback option is set to Default.
With this setup, controlling the deck remotely from the capture window, I get video but no audio. The only audio I get is when the deck is connected to my video monitor and I use it to monitor the output of the deck. The audio is there when I play back the clips after capture but I cannot monitor the sound with the computer's speakers. If I go to the A/V Devices tab, under Video, it shows the same "[Missing] Apple Firewire NTSC (720 x 480) with the same choices described above, and the Options button next to it doesn't do anything.
Can anyone think of anything I've missed in the initial setup?
Keith
Message was edited by: Keith R Thompson

Keith,
For whatever reason (perhaps the intense processor needs) HDV does not allow you to monitor your audio during capture. The computer just will not do it. What I have done, if I really want to hear what's happening durning capture, is plug my speakers into the headphone jack of my XL H1. Due to the processing that's going on, the audio "lags" behind the video by a couple of seconds.
I'm pretty sure this is not a setup problem, but just a limitation due to the nature of your format.
Hope that helps!
~Luke

No Audio during Log and Capture

Hello, I have FCP 6.0 and am unable to hear my audio during log and capture. I have this problem on all 5 G5 Macs that I have, and have tried different editing docks and cables. I have used FCP for more than 5 years and have never had this problem. iMovie has audio during capture, so I am convinced that there is a pre-set in FCP that I don't have checked properly, but I've been over them many times and still have no answer. I searched past forums and didn't really find anything helpful to me.
My pre-sets are set to DV NTSC 48kHz and the playback pre-sets are set to default. I can hear audio of my clips after I log and capture, but I still need to hear audio during importing. I'm more confused than anything. If anybody has had this problem before or any suggestions for me, I'm all ears.
Thanks.
John

... as Bogie says.
However... this is a non-feature that dates back to slower CPU days... yet, still with all the different formats and such I (ME!!) I believe it's still good practice to leave it off.
Devoting as much CPU work to the capture process lessens the chance for something to go wrong. You can easily monitor the audio directly out of the deck as needed.
Sure -- octo cores need 30 apps open just to get your money's worth and I'm sure you won't have any issues using an 8th of one to send audio thru itself while the other 7 and 7/8ths are used for capture... but who wants to risk it?
Not me... I'm to old to change my ways.
Blast you FCP v1.2.5 on a beige G3 with 7gig and 15gig hard drive -- you taught me well.
CaptM

No sound during fullscreen playback iTunes.

After updating my iTUNES to Version 12.1.2.27. There is no audio during fullscreen video playback. Audio is normal during windowed playback.
I'm using a Macbook Pro retina 13" with OS X 10.8.3. Even after increasing or decreasing the audio level in fullscreen there is no sound. Please help.

Hi!
Welcome to the discussions and to Macs!
Don't know about your specifics, but a simple thing to test is to look at the iDVD menu for the titles....I am assuming this is on a submenu....to see if the audio icon is active. If you look in the audio well, there should be a tiny icon with wavy lines. If it is not present, click on the audio well and it should return. It is very small...I almost could not see it.
You cannot see this if you have any audio files in the well, so remove the file first.
I am sure more knowledgeable users will offer their advice as well.

No Sound During DVD Playback

I have a new HP elitebook 8460p and there is no sound during DVD playback. Is there a setting I may be able to change? Here is a list of things I've tried and pertinent information:
- Confirmed all system mute settings are off (e.g., not muted)
- Confirmed DVD works on other devices
- DVD will not play sound in InterActual Player, Windows Media Player, or VLC Media Player
- Picture is fine...just no audio
- Running XP
- All other system sounds work
Help!

Try installing AC3 Filter:
http://www.free-codecs.com/download/ac3_filter.htm
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Controlling Speed of audio and video playback ?

Hi!
I would like to know if there is (or will be) a way with
upcoming Flash CS4 or even with Adobe Flash Player 10 capabilities
(or even with Adobe Pixel Bender) to control the speed of an audio
or video playback.
For example being able to play some sound slower or faster
and even adjusting audio pitch (and other audio filtering).
It's been a while that I've been looking for this (back to
Flash Player 6 when Flash was part of Macromedia) and with all
progress achieved since then I hope there is some accelerate and
decelerate feature now.
Please let me know about it.

More information needed for someone to help... click these links and provide the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
Also, H.264 will NOT work inside an AVI wrapper http://forums.adobe.com/thread/854115

Problems with audio during video after itunes update

Recently updated to the new itunes and now there is no audio only during video playback. Tv shows and movies that previously played fine other than synchronization issues now have no audio. Help!

Hello Marcr
If you installed "dreamrecorder" on only one of your Mac laptops, you can use the other Mac to test your iSight to ensure it is functional. Try the suggestions in the " iSight: How to Troubleshoot" link there, too. Once you know that your External iSight is working correctly, you can concentrate on repairing the problem apparently caused by your "dreamrecorder" installation.
Third party applications can sometimes cause conflicts with iSight, especially if they are not installed or uninstalled properly.
Some applications provide "uninstallers" or specific instructions for all steps required to do a proper uninstall. If your "deinstalling" was accomplished by simply dragging such an application to the trash, some changes made when you installed the software may remain and be the cause of your problem. Check the Help or readme documentation for the "dreamrecorder" to be sure you uninstall correctly. Follow those instructions exactly.
You may need to reinstall the software to find the Help or readme info. If you do not want to reinstall to find the Help or readme files, or if they do not give you the help you need, you should be able to get the answers from the software developer's website. The developer may have FAQs, online documentation, or a support forum dedicated to his specific software. Many developers also offer technical support contact information to give you technical assistance by phone or email.
If none of those help you, the best suggestion I can offer for your "dreamrecorder" questions is a Google Search.
Jim

ITunes 7.5 hangs during CD playback - OS X

I posted the below last night. Today while checking for followups, I found that it was under Windows version of iTunes (even though a couple other posters may be referring to OS X as well based on their signature) My comments are for only for Mac.
+original thread:+ http://discussions.apple.com/thread.jspa?messageID=6003356#6003356
+::ejc3 wrote::+
Re: itunes 7.5 hangs during cd download preview
Posted: Nov 30, 2007 10:46 PM
I am having the same problem on 2 different G5 Dual PPC systems running 7.5. This occurs when playing commercial (redbook) CDs..... during CD playback iTunes stalls after the 2nd song (usually at time marker 0:02). I have no problem playing back any music already in my iTunes library (99% AIFF format). Something is up with this version! Please correct it asap. thanks.

When I searched I missed this thread: Problem Playing CDs in iTunes 7.5 http://discussions.apple.com/thread.jspa?threadID=1225880&tstart=0 which has the solution/fix. Seems to be the "Use Error Correction when reading audio CDs" setting in the Advanced >Importing iTunes preferences. The other solutions deleted plist files which essentially reset the preferences to default which has Use Error Corrections off.
I am listening to a CD now which did not stall at the normal track location.
I have to confirm that a CD does not stall when ripping(import CD) with the Use Error Correction setting ON.

No audio during fast playback.

Similar Messages

Maybe you are looking for