No audio during playback Premier Pro CC

I'm having a problem hearing audio during playback. The audio indicater moves up and down, but there is no sound. I already downloaded and reinstalled 3 times, to no avail. I'm using Windows 7. Could anyone help?

Here is a screenshot of the audio preferences.Audio device is Realtek high definition audio>. I'm using desktop speakers.

Similar Messages

NO AUDIO during playback after converting the VIDEO using Creative Video Conver

I have a ZEN 2GB/4GB/8GB/6GB/32GB.
I tried to convert video from a dvd using Creative Video Converter.
The video is fine but there is no audio during playback.
What am I doing wrong?

"If this is the case, the original video file may be in a format that contains muxed (multiplexed) audio and video, and cannot be exported with audio."..."If the format is "MPEG1 Muxed" or "MPEG2 Muxed," the audio portion of the file may not be retained with QuickTime Pro or iMovie."
I have read that article and I thought it ment that the sound will work after you convert to the MPEG4 format, which I did.
Are you saying that if it starts out as "Muxed audio" then there is no way to convert it?
If that is the case then in what situation would you need to use the Videora Converter?
Thanks,
Sean

No audio during playback

Hello all, I am extremely consfused as to what is wrong with the premiere pro settings. I have a blackmagic intensity pro installed. I can use it just fine to capture video. No matter what audio files or Videos I use, the audio meters show audio during playback, but my speakers are not playing anything. I have searched for a solution. My only guess is that the program is pointing audio to the blackmagic intensity pro and not to my audio card. Any suggestions?

I talked to Blackmagic about this problem and was told that they could only guarantee audio/video sync if their output was used so their presets only let you do this. With the Decklink studio this is a bit of a pain if you are working in 5.1 as there are only 4 analogue outs, I had to build a rack of D to As to get my monitoring working.
Richard Knight

NO AUDIO DURING PLAYBACK ON TIMELINE

Ever since I tried using the Narration tool in Premiere Elements 12, I have had nothing but problems with audio. The narration tool itself cause Premiere to crash. I decided not to use it again, but I continue to have problems. I can hear audio in the clips when i play them through the source monitor, but if I drop it on the timeline, then there is no audio during playback. I've already checked my audio output settings and I've already tried restarting Elements and my Macbook. I've even tried to change the audio output devices just to make sure I didn't screw it up when trying to activate the microphone for narration. Please help!
*NOTE - this is only a problem in the current project. When I made a new project, it played back fine. The problem is that I have hundreds of assets that I've renamed with descriptive file names, as opposed to the formatted file name the camera gave them.

Good morning Steve.
Yes, there is a waveform on the clips. However, when I open Audio Mixer, I do not see any audio registering.
Also, I do not have a USB microphone plugged into my computer.
Finally, I have done the Audio Hardware check. I have tried using both "Built in Output" and "System Default Input/Output" but neither works.
Not sure if it helps to know this, but I have also tried to add music files to both Audio 1 track and also Soundtrack track. Neither one will play back audio on the timeline, even though I can clearly see the waveform on the file. It also does not register on the audio mixer. This tells me that it;s definitely an issue with this specific timeline. Is there any setting or mute button I may have accidentally changed? None of the mute buttons are checked off in the audio mixer.

Video losing sync with audio during playback

I am having a unique issue with FCP 6.0.6.
We are using this version to log and capture a switched video feed with audio
through a Black Magic DeckLink HD Extreme 3 PCI card. Capture works fine.
But during playback the next day, the video seems to drop a frame, or lose sync
(you can see it visually) then continues playing. The result is the video is now
out of sync with the audio.
We do a weekly 3 camera shoot which is webcast, and then later uploaded to youtube.
We have been running this setup for a number of years without issue, but this has started
becoming an issue the last 3 weeks in a row with no change to our setup.
The webcast does not experience this, which makes me think there is a sync issue
between my switcher and my FCP machine.
Any thoughts or ideas?
Mac Pro
3GHz Quad Core Intel
16 GB Ram
OS 10.6.8

Are you ABSOLUTELY sure there was NO change? (All sorts of problems can occur if you haven't turned off automatic updates.)
In any case, you might want to run Preference Manager from Digital Rebellion (free) to delete the FCP prefs. Sometimes they get corrupted and can cause some funky behaviors.
Otherwise, sounds like a question for Blackmagic technical support.
x

Nudging audio during playback with audio plugins applied causes crash

Hi,
We are having some unusual crashes at the moment in a very specific situation:
1. An audio effect is applied to at least one track of audio. Reverb and compression cause it but not EQ.
2. During playback
3. Nudging an audio clip using Alt and the left and right arrow keys. One nudge is ok, several quick nudges in succession causes a crash.
The machine starts beachballing and never seems to stop. Video playback continues.
This is obviously quite easy to workaround but just wondering if anyone else is having this issue and also wanted to highlight to Adobe.
Specs:
Mid 2010 Mac Pro 2 x 2.9GHz 6 Core Xeon
32GB RAM
nVidia GTX 680
240GB SSD boot drive
2TB internal cache drive
Adobe Premiere 8.1.0 (81) Build
OS 10.8.5
thanks
Tom

Same issues with nudging audio on a Mac here too. Flagged it on here last week but no response. Guess it's just you and I!

No audio on Adobe Premier pro for some video

I have recorded a series of videos as an .MTS format and imported them on my computer. Some of the videos use audio from the onboard camera mic and some interview footage use a clip-on audio mic. When I play back the videos on premier pro cc, the onboard mic recordings are fine--but I hear nothing from the videos where I used the clip on mic. (the videos with the clip-on mic are in mono)
For the videos I recorded with the mono mic:
-I can clearly see levels that indicate audio is there.
-When I play back the video on the camera, the audio is also there, clear as day.
-For some reason, there is no audio when the computer plays back, even when I use VLC.
I searched on-line, but there does not to be much info on my specific issue. Can you suggest anything?

Try this - I had the same problem and it worked for me. Can you see waveforms in the suspect audio track in the Premiere timeline? If so, it's there and it's just a playback issue which could be a couple of things. Eg,
- you won't hear audio if Premiere is still generating peak files (to check if this is your problem, check in the bottom right hand of the corner and you'll see a little yellow bar progressing and a message saying 'generating peak audio'). This can take several hours or even over night for a big project, eg with lots of Red .r3d media.
- another reason is if the audio can't be played back without rendering. Is the playback bar at the top of the timeline yellow, green or red? If green, this could be your issue. When you go to the go to the sequence menu and go to select 'render audio' is it greyed out? If so, you need to select the 'render audio' box in the 'general' tab of the 'preferences' pane from the menu. Then render your audio and you should be fine to play back. Does this help?

IDVD slideshow DVD pauses video and audio during playback...messages about sleeping DVD player

I have just burned a slideshow on iDVD from iPhoto book project. During playback, the DVD player pauses with photo visible and audio stops for same time, and then resumes after about 5 seconds. I thought the MP3 (purchased from Amazon because it was not in iTunes) format may have been the issue, so, I converted to AAC, and rebuilt slideshow from scratch using AAC music. During Preview playback, the problem does NOT exhibit...only when played from produced DVD on both computer or DVD player. I only have this one pause at same time on every DVD burned. Is AIFF a probable solution? I saw a message saying DVD player "Sleeping" or "DVD player waked from sleeping" at beginning and end of this pause.

Whoa!!! I'd back up here and make sure you have your "T" s crossed before your continue with 10,000 discs! What were your bitrates for the main track and Bonus features? Did you use AC3 audio? DVD has a bitrate ceilings of 9.8 for video. Its also important you check your bitrates in a viewer to makes sure your OK.
Bitrates are the most crucial part to control in DVD.
http://www.videohelp.com/tools?toolsearch=bitrate+view&Submit=Search&s=&orderby= Name&hits=50&convert=&dvdauthorfeatures=

FAQ: Why is there no audio during playback?

See this troubleshooting document:
"No sound during playback in Adobe Premiere Pro"

Just click the Mute button for just a second, then unmute it by clicking it again. This causes iChat to reassess the connection and that might do the trick.
You need iChat version 3.1.8 (445), AIM 6.1 should be on the PC and your friend needs a built in microphone in this webcam.
Message was edited by: Jan Pieter Melchior

I have no audio coming on premier pro cc on my Mac Pro.

Im using Premier Pro CC on my Mac Pro and I'm getting no sound coming out of the app. All other apps like iTunes and quicktime are fine. Im using MOV and mp4 files and they have waveforms in the timeline but still no sound.

Hi Mark,
Are the Audio meters working? Does the play head move?
Have you checked the Audio Hardware settings under Preferences?
Thanks,
Rameez

Device driver error msg at startup-get white screen w/audio during playback

PE10 has been working fine until today.
Upon startup I get an error message saying my display driver is incompatible.
I checked the driver in Windows 7-it says the driver is up to date and working fine.
When playing back a video clip I'm editing in PE10, I get a white screen in the playback area with the correct audio. When I pause the playback, the video image appears. Play = white playback screen.
I have
-checked the display driver
-rolled my computer back to an earlier restore point
-uninstalled and reinstalled PE10
-turned off my firewall
Any other suggestions to try?

What version of Premiere Pro? Include the minor version number (e.g., Premiere Pro CS5.5 with the 5.5.2 update).
Premiere Elements 10
Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
none available
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
Windows 7 AMD dual-core processor
AMD Radeon HD 6310 display driver
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
MVI files from camera -- all worked fine in PE10 until today - same files play fine in other players
If you are getting error message(s), what is the full text of the error message(s)?
What were you doing when the problem occurred?
Starting up PE10
Has this ever worked before?
Yes, always until today.
What other software are you running?
None
Do you have any third-party effects or codecs installed?
No
Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU).
I'm not techie and don't know what this means - I don't have anything mentioned in brackets
Are you using Mercury Playback Engine GPU Acceleration?
no
Does the problem only happen with your final output, with previews, or both?
Error message above happens during startup
PE10 now loads really slowly (5 minutes)
Playback in project gives white screen instead of video. Audio is fine.

No audio during playback in Garageband 11.

I've gone through some of the forum questions and still cannot figure out the problem. Each individual track shows playback through the volume display except for the master track (nothing is soloed or muted), and I've checked both the System preferences for the Mac and in Garageband. I've also tried to create new tracks to find a phantom soloed track, recorded on them and tried playback. I disconnected my interface, restarted the computer and Garageband a number of times -- still nothing. iTunes works, as do other Garageband projects I've saved. Any help would be greatly appreciated.
thanks!

It's been enabled and i've turned the volume up just to be sure yet the output display on the master track still shows nothing and there's still no sound.
Thanks for the reply though.
I've copied and pasted the tracks into a new project but any other suggestion to salvage my original project would be great -- I'd rather not have to re-create all the settings, patches and plug-ins for each track since there are many of them....
Thanks again.

Very Quiet Audio During Playback

Hi,
Just trying out my iPod 5G and an Apple AV cable.
Video is fine but audio is very very quiet. Have to have the iPod set to virtually full volume and TV up to about 50 (normal volume on TV is 12-15) to get anything like listenable audio.
The videos are fine through headphones with sound when volume is set to approx 25%.
I am using Handbrake on the Mac to encode into MPEG-4 format.
Any ideas ???
Regards
NIALL 8-)
iPod 5g 60gb Firmware 1.1.1

This is the way it works for everybody, your unit is not malfunctioning.

Audio desfasado en premier pro 6.5

Me ha estado pasando el problema que cuando exporto una videoproduccion, el audio se desfasa, es decir, se oye lo que la gente dice unos momenos antes de que la boca lodiga, estoy frustrado y ya no se que hacer.
Alguna sugerencia?
Daniel

[Se trasladó al foro en español.]

Multicam Sequence Audio Editing in Premier Pro CC

I have synced up all my video clips via audio (new feature in CC) and have gone through the whole video, selecting which shot I want at each point in the wedding ceremony. However, I have 15 channels of audio and not one of them is the be all end all audio clip. In fact most of the audio clips don't have any audio until a certain part in the service (for example, a singer's mic doesn't have audio till the person starts singing). Some of my audio channels have terrible natural sound and I only needed the audio so that I could sync it up. Calling Adobe, the guy told me I needed to come here because he couldn't help me. I need help FAST!

There's no question in your post. Only a statement.
Not sure what you're wanting to know, but for what it's worth here's how I do multicam and have full control over ALL channels of the audio within the same timeline as the nested multicam clip. I sync all my clips stacking them on the timeline. I then ALT+Select ONLY the Video clips and right-click and select NEST. Now you should have one video clip and all your audio channels still laid out. Next, right-click on the nested video clip and select MULTICAM>Enable. Done. Now you can do your normal multicam edit and still have full view of your audio channels and just keyframe them off when you don't want to hear them, etc. Not sure if that answered your question, but then again, there was no question so hope this helps!

No audio during playback Premier Pro CC

Similar Messages

Maybe you are looking for