No audio during video recording

Recently I realize when I record videos with my iphone4, there's no audio when I play the videos I recorded.. Only a buzzing static noise but no audio was recorded.. Anybody else had the same issue?

Before you do that, I'd encourage you to download and install this BlackBerry-provided tool, and see if the hardware is truly an issue. Run the audio tests.
BlackBerry Virtual Expert for Q10
Scan the QR code above to download the app.
Open BlackBerry World on your device. Do one of the following:
On a BlackBerry 10 device, swipe down from the top of the screen. Click Scan a Barcode.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Possible to disable audio during video recording? On 5th gen nano.

    I'd like to use the video camera to record picture only.   Is there some way to disable the audio?  Does plugging in a microphone to the audio jack disable the onboard mic?   Thanks.

    Not possible. You have to use a regular digital camera OR use an iPod Touch (4th gen or better) OR iPhone (3 or better)

  • "Noise" during video recording, normal?

    Is it normal to hear a hissing/"noise" sound for lack of a better word during video recording on the ipod touch 4? I could be in a perfectly quiet room and I can still hear it. Is this normal or should I return it to a Apple store for another one? I ordered it online but figure going to the local store would be faster.

    It has nothing to do with low light at least not in my case. I'm returning it to Apple, I think it's a bad speaker as I ran the memo app in a quiet room (Didn't say anything) and on playback it still made the sound (A shhhhhhhh sound)
    Guess I got a bad one

  • Iphone shutdown during video recording

    Hi folks! i've got several times a very strange problem during video recording. my iphone 4s (but it happened also to my brother iphone) shutting down during video recording giving the message about low battery.
    to restart the iphone i need to connect to the battery charger but after the boot the battery is not drained. Today for example happened and the battery after the boot while connected to the battery charger was 53%.
    As it happens also to by brother iphone 4s i don't think that it's an hardware problem, and the funny thing is that it happens in a random way. Some tims i'm able to register 1h of video without problems, other times 3m/5m  and the iphone shutdown.

    This is happening with my Iphone 5 with latest iOS. I'll record video and it will rapidly discharge battery. If it shuts down and I plug it in two minutes later it will come back with over 50% battery.
    I've drained it completely dead then charged it for at least 4 hours numerous times. I started a seperate discussion about this and my phone's horrible battery life in general.

  • During video recording the auto focus doesn't work automatically!i must have a tap on the display for to use the autofocus! Ihave an iphone 4s

    during video recording the auto focus doesn't work automatically!i must have a tap on the display for to use the autofocus! Ihave an iphone 4s

    I know.  Same issue here.  When I'm not recording but have the video camera on, the autofocus works fine.  As soon as I tap the record button and recording starts, the focus is locked until I tap on the screen to focus.  I haven't used the camera all that much because of this problem.

  • Turn off the vibration or message notification automatically during video recording.

    Please add on mechanism to turn off the vibration or mute the message notification automatically during video recording, due to the motor vibration sound always reocrd into the video.

     You could set your phone to silent  http://talk.sonymobile.com/t5/Software-Updates/Lollipop-New-Features/m-p/955490#U955490 It's not ideal but it does the trick.  I agree with you, I wish we had an option that if an app/game it's on immersive mode, like while using the camera, we had an option to deactivate the notifications popping and/or the notifications without having to set the phone to silent.  

  • IPhone 4 - Which microphone is used during video recording?

    I was wondering if anyone knew which of the iPhone 4's microphones are used during video recording. I'm not completely sure but it seems like only the noise canceling microphone is used, whereas voice memos use the bottom microphone only.

    Exactly correct. Why is was made this way, I have no clue.
    I think both should be using the top mic rather then the bottom as that is were your hand usually is. I think it should be made an option.

  • How to turn flash on during video recording N73 ME...

    How to turn flash on during video recording N73 ME ?
    Any hack sort of something ?
    Thanks
    krates

    if your camera settings is on automatic then the flash will be on while recording. that is how mine is set and it stays on.
    everything happens for a reason
    check out my blog @ http://mycellife.blogspot.com/

  • App with continuous autofocus during video recording?

    Is there an iPhone app which allow continuous autofocus during video recording? (W/o tapping)
    Thanks!

    Is there any way to disable continuous auto focus? or at least any setting which can help getting a better video. In My xperia z1 compact , when i take a video, it will always hunt for the focus, result is Jurky video.
    after lollipop upgrade also, things doesn't changed much.
    so can anybody tell, any setting that can avoid this?
    Thanks
    Pavan

  • Z30 auto-focus during video recording after OS update 10.2.1.537

    Why the autofocus doesn't work when using the BB video camera. It is strange that it will autofocus when it is not recording (video camera). It was not like that before the OS update 10.2.1...
    When video recording moving persons or objects or even when u are moving the camera should autofocus automatically.

    yeah. In other words manual focus during video recording only.

  • Disable Continuous Autofocus during Video Recording

    Hi, is there a way to disable the continuous autofocus during video recording? The continous autofocus is very annoying during video recording as the video consistently appear out of focus when during refocusing. There are alot of situations where continuous focusing is not required.
    Can we have a new video focusing mode where the camera will only refocus to an area that is tapped on the screen? This is a very basic feature that is available in almost all other smartphones. Without this focusing mode, the video recording of the Z1 is 99% unusable although the phone has a very good sensor. As the Z1 is Sony's flagship smartphone, I hope that you can add this simple feature as a software update asap. Thanks.

    Is there any way to disable continuous auto focus? or at least any setting which can help getting a better video. In My xperia z1 compact , when i take a video, it will always hunt for the focus, result is Jurky video.
    after lollipop upgrade also, things doesn't changed much.
    so can anybody tell, any setting that can avoid this?
    Thanks
    Pavan

  • No Audio on Videos Recorded with OS 2

    Hello After a few days with the version 2 I just realized that when I transfer the videos  I recorded with my PB to my MAC, the videos dosen´t have audio.
     All the videos recorded with the OLD PB version does have audio.
    I have PB 2.0.0.7971 and Mac OSX 10.7.3
    Thank you.
    PS. All videos work great on PB.

    No, I imported by two different ways:
    1.- Direct from PB as USB.
    2.- Importing media from BlackBerry Desktop Software.
    In both cases same result no audio in videos recorded with PB 2.0

  • There is no audio in video recording

    There is no audio in video recording

    Bengt,
    I would recommend reaching out to support directly for this. Either email them back at the support email you have from your previous case, or you can chat with a live agent. A possible fix is here, along with the link to the live agent Audio missing from recorded meeting
    Alternatively, you can reach out to Adobe support directly through one of these numbers Adobe Connect Support phone numbers

  • Problems with audio during video after itunes update

    Recently updated to the new itunes and now there is no audio only during video playback. Tv shows and movies that previously played fine other than synchronization issues now have no audio. Help!

    Hello Marcr
    If you installed "dreamrecorder" on only one of your Mac laptops, you can use the other Mac to test your iSight to ensure it is functional. Try the suggestions in the " iSight: How to Troubleshoot" link there, too. Once you know that your External iSight is working correctly, you can concentrate on repairing the problem apparently caused by your "dreamrecorder" installation.
    Third party applications can sometimes cause conflicts with iSight, especially if they are not installed or uninstalled properly.
    Some applications provide "uninstallers" or specific instructions for all steps required to do a proper uninstall. If your "deinstalling" was accomplished by simply dragging such an application to the trash, some changes made when you installed the software may remain and be the cause of your problem. Check the Help or readme documentation for the "dreamrecorder" to be sure you uninstall correctly. Follow those instructions exactly.
    You may need to reinstall the software to find the Help or readme info. If you do not want to reinstall to find the Help or readme files, or if they do not give you the help you need, you should be able to get the answers from the software developer's website. The developer may have FAQs, online documentation, or a support forum dedicated to his specific software. Many developers also offer technical support contact information to give you technical assistance by phone or email.
    If none of those help you, the best suggestion I can offer for your "dreamrecorder" questions is a Google Search.
    Jim

  • S90 Static noise during video recording

    Everytime I do video recording on my S90, I can hear static noise during playback.
    Does anyone else face this problem? Is this hardware or software related?

    Update the S90 via OTA
    Once that is done then try again. If problem persist then open dialer and press ####1111#.
    In engineering mode, select back mic test in Item test. This will record via back mic and will playback. If you still hear static during this time then bring it to the service center.
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

Maybe you are looking for

  • Driver for Nomad Jukebox Zen Xtra 40GB

    Before going too far, I have read the FAQ. I did try to go to Support / Downloads to try to find a driver update for my player, but got error 403, Forbidden. How do I get into this download area? Is the Creative Media Player interface also in this do

  • Numerous Kernel Panics on Mountain Lion

    Hello everybody, I get numerous Kernel panics with my MacBook Pro 2,66 GHz Intel Core i7 4 GB 1067 MHz DDR3 NVIDIA GeForce GT 330M 512 MB OS X 10.8.1 (12B19) Here's the record: Interval Since Last Panic Report:  35413 sec Panics Since Last Report:   

  • Mac OS 10.4 Tiger

    I was wondering if i could use my ipod touch on 10.4 tiger

  • Can I use ado when I connecting to oracle?

    I programmed with VC++ and Power Builder to connect to oracle, there are no problem.But when I tried to use VB I found that I can not get data using ado function. Anyone can help me? Thanks very much. null

  • Validate a domain name or ip addres using regex

    this is the code I use but I can't set EXP2 to limit the number under the 256. Does anybody help? P.S. EXP1 validate a domain name (es. www.myserver.com) EXP2 may validate IP address (es. 111.111.111.0) public static boolean isServerAddress(String s)