No Audio for Remote User when using Thunderbolt Display

I have the latest 13" macbook pro with a thunderbolt display. For the most part everything works fine, but I have encountered a problem when I try using facetime with this setup. The remote user cannot her my voice.
I have gone to the sound setting in system preferences and I have  made sure that the sound inpur device is set to Display Audio, and it appears that the microphone is working (the bars are fiickering when I talk), still, I cannot be heard by the remote.
I have tried to capture a movie with the display's camera and mic, and that works fine.
Unplugging the display an using the laptop only  also works fine.
I used the same setup with Skype, and the sound worked fine.
The probem appears to be with FacetTime and the Thunderbolt Display
Has anyone else experienced similar problems?

I am having the same issue with my 13" MB Pro Retina and my 27" ThunderBolt display.  So far I haven't been able to find a solution to the problem.

Similar Messages

  • CPU is very hot when using Thunderbolt display and mac attached USB hard drive for TimeMachine

    Hello,
    i've bought the new MacBook Pro 15" and a Thunderbolt display. Everything works fine for me due to the latest updates, but i experience an issue which i really don't understand. When i connect an usb hard drive for TimeMachine to my display it works like expected (CPU has a temperature of 64°C), but when i connect it to an usb port of the mac while using my display the CPU temperature goes crazy (spikes about 80°C) and it gets very noisy. Has anyone else experienced this behaviour?
    May this has something to do with the dual graphics adapter and how the system handles the data stream to thunderbold ports and usb devices? Which graphics card is used for the external display, the internal gpu or the adapter from ati? I've googled a lot but haven't found appropriet answers about these questions.

    Hi there ulairi9!
    I understand how this would be a frustrating issue! I have an article here that can provide some troubleshooting steps for you, and can hopefully help you resolve the issue. That article specifically addresses the issue you are experiencing, and can be found here:
    AirPort Extreme and Time Capsule: External USB drive becomes inaccessible
    http://support.apple.com/kb/TS3271
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • AD SSO not happening for Remote Users

    Dear Members
    I am having an issue with the NAC Deployment for Remote users (Users behind WAN Router)
    Windows AD SSO (2008) is happening for LAN users successfullly, however remote users
    are not able to do AD SSO.
    it is ensured that remote users even in unauthenticated state can reach Active directory. there is no filtering
    on any of the device across the path, for this communication.
    When i use Kerbtray on the remote PC, i found no tickets at all.(i am logged in thru Domain)
    what could be going wrong, is it delay (as they are wan user) which might attribute this issue, and if so, where are the needed parameters that can be tuned for AD SSO to happen.
    Any help will ne highly appreciated.
    thanks
    Ahad

    Hi Ahad,
    As long as ALL the policies in Table 8-1 are configured for the Unauthenticated Role
    http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cas/s_adsso.html#wp1174219
    the CAS should be out of the picture for what concerns the communication between the PC and Kerberos.
    If the Kerbtray.exe output for a failing user is empty, it means that the unsuccessful users do not have any Service Ticket (ST) at all.
    This points to an issue with AD (considering the fact that the CAS is already allowing all the traffic to/from AD).
    The failing users are either unable to send the Ticket-Granting Ticket (TGT) to AD, or they are unable to obtain the Service Ticket (ST) from AD.
    The CAS during this phase is neither performing any actions nor blocking any traffic, since all the communications to/from AD are already fully open in the unauthenticated role.
    Regards,
    Fede
    If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

  • How can you provide datalevel security on perticular user when using

    hi all
    how can we proved data level security for the single user when using external table authentication,
    again we have crated one more group in rpd and we have assigned user to that group,
    so ,is there any other way to do it????
    Thanks
    sreedhar

    Hi,
    If its is to restrict that user to view some data,then no need to place him in a separate group.Can achieve this...
    High priority is for restriction.
    Lets take group-Test with two users-test1,test2.These two users are under Test group.
    I applied data level security for only one user test1(restricted him to view market not equal to Central Region) but didn't apply data level security for test2.
    Now i added the group to presentation catalog and gave permission to dashboard showing Market report.
    When test1 logs in he can see all markets except Central Region,where as test2 logs in he can view all regions including Central Region.
    Here Test group is having full access so,test2 can view all regions but test1 user is restricted for some value and its working fine.
    If you want apply data level security to user to not view some data,then you can maintain that user in a group with many other users and achieve it.Above example shows it.
    If its is to restrict the whole group to view dashboard and make a single user in the group to view some data in the dashboard then its not possible(priority is for restriction) in this way,in this case its better to create that a new group to that user and assign him.
    Regards,
    Srikanth

  • How to create accounts for remote users in 1841

    Hi,
    I was wondering how can i create accounts for remote users to be able to vpn please ? I have setup the vpn server successfully.
    Regard,

    Hello.
    I believe that you can try this:
    Router# configure terminal
    Router (config)# password encryption aes
    Router (config)# crypto ipsec client ezvpn ezvpn1
    Router (config-crypto-ezvpn)# username server_1 password 0 blue
    if you are using easy vpn.
    from: http://cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a0080455b7d.html

  • IPod nano 6gen does not send audio to home stereo when using an older (iPod classic) dock.

    iPod nano 6gen does not send audio to home stereo when using an older (iPod classic) dock.  Is this a functional discount or something else?  [This system has worked with iPod Classic and Nano 4 gen.]

    Perform the instructions for your version of Mac OS X on this page.
    (15457)

  • What is the best way to display errors to users when using JSPs?

              Hello,
              Could someone suggest me the best way to display errors to users when using JSPs?
              Many thanks in advance.
              Rino
              

              Thanks for the code snippet!
              Rino
              "Deepak Vohra" <[email protected]> wrote:
              >
              >
              >The 'errorPage' attribute of the 'page' directive forwards uncaught run-time
              >exceptions
              >to an error processing page. For example:
              >
              ><%@ page errorPage="error.jsp" %>
              >
              >redirects the browser to the JSP page error.jsp if an uncaught exception
              >is encountered.
              >
              >
              >Within error.jsp, indicate that it is an error-processing page, via the
              >directive:
              >
              >
              >
              ><%@ page isErrorPage="true" %>
              >
              >The Throwable object describing the exception may be accessed within
              >the error
              >page via the 'exception' implicit object.
              >
              >
              ><% if (exception != null) { %>
              ><p> An exception was thrown: <b> <%= exception %>
              >
              ><p> With the following stack trace:
              ><pre>
              >
              ><%
              > ByteArrayOutputStream ostr = new ByteArrayOutputStream();
              > exception.printStackTrace(new PrintStream(ostr));
              > out.print(ostr);
              >%>
              ></pre>
              >
              >
              >
              >"Rino Srivastava" <[email protected]> wrote:
              >>
              >>Hello,
              >>
              >>Could someone suggest me the best way to display errors to users when
              >>using JSPs?
              >>
              >>Many thanks in advance.
              >>
              >>Rino
              >
              

  • Creation of HR master record For a user when a time entry role is added

    Hi,
    Description summary:Automating creation of HR master record For a user when a time entry role is added to a user account
    Description detail:When time entry role is provisioned to a user account,the HR master record is linked,It is compleated after a user is created because a user id must exist .
    It is part of the record.In addition the user must be hired into SAP in order for the HR Master Record to Appear in SAP.
    What we need to do is when a 'Time and Personal Data Maintainer Role "is Added by the VIRSA_ADMIN user,automate the creation of the HR Master Record.
    Transaction code :SU01 to add the role to the Account.
    How to Create the User Exists For this Request…Its very urgent pls help me on this.
    Thanks.
    Vipin

    Why do you need a User Exit? You can create a BDC on PA40 & kick it off upon adding the role..
    ~Suresh

  • [svn:fx-trunk] 10545: Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts

    Revision: 10545
    Author:   [email protected]
    Date:     2009-09-23 13:33:21 -0700 (Wed, 23 Sep 2009)
    Log Message:
    Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts
    QE Notes: 2 Mustella tests fail:
    components/DataGrid/DataGrid_HaloSkin/Properties/datagrid_properties_columns_halo datagrid_properties_columns_increase0to1_halo
    components/DataGrid/DataGrid_SparkSkin/Properties/datagrid_properties_columns datagrid_properties_columns_increase0to1
    These fixes get us to measure the embedded fonts correctly when going from 0 columns to a set of columns so rowHeight will be different (and better) in those scenarios
    Doc Notes: None
    Bugs: SDK-15241
    Reviewer: Darrell
    API Change: No
    Is noteworthy for integration: No
    tests: checkintests mustella/browser/DataGrid
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-15241
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DataGrid.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridBase .as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.as

    Hi Matthias,
    Sorry, if this reply seems like a products plug (which it is), but this is really how we solve this software engineering challenge at JKI...
    At JKI, we create VI Packages (which are basically installers for LabVIEW instrument drivers and toolkits) of our reusable code (using the package building capabilities of VIPM Professional).  We keep a VI Package Configuration file (that includes a copy of the actual packages) in each of our project folders (and check it into source code control just as we do for all our project files).  We also use VIPM Enterprise to distribute new VI Packages over the network.
    Also, as others have mentioned, we use the JKI TortoiseSVN Tool to make it easy to use TortoiseSVN directly from LabVIEW.
    Please feel free to contact JKI if you have any specific questions about these products.
    Thanks,
    -Jim 

  • How to set a welcome message for a user when he is login

    in my server i am creatin a user "john" in solaris10 box when ever he logins in to the server he should get a message like "welcome john" what is the option to set the message ....
    how can i set a welcome message for a user in solaris
    please guide me the process how i can do
    Thanks in Advance

    THANK YOU FOR YOUR REPLY
    i have checked it out in /etc/motd
    its working fine but the message is coming for every user when they login
    i want message lilke
    if john is looged in
    than message like "welcome john"
    can u please tell me the procedure where to change in /etc/profile and /etc/.login

  • Choose accent color for hovered icons when using dark interface in Bridge?

    How about add the ability to choose the accent color for hovered icons when using a dark interface in Bridge?  Currently, the icon color remains orange and unchangeable.  Personally, I would prefer a blue accent color to match my system.  Any chance of making this possible in CS6?

    Oh, I should add that I'm looking for solutions somewhat up-to-date and/or are related to or designed for 10.6 Snow Leonard. I did a search for answers before asking the question, and the (mostly unsatisfactory) answers I found were all from several years ago and applied to earlier versions of OSX (10.3, 10.4, etc.), and therefore no longer were relevant or usable.

  • Need SP_TN for specific user must use specific document series and warehouse in Marketing Documents

    Hi experts,
       I need SP_TN for specific user must use specific document series and warehouses in Marketing Documents SAP B1.
       Kindly give solution ASAP.
    Thanks in advance

    Hi Nagarajan,
       It show (1) Not allowed to add PO.
       I used the following SP
    IF  @object_type = '22' AND @transaction_type IN (N'A',N'U')
    BEGIN
    IF Exists
    (SELECT T0.DocEntry FROM POR1 T0 INNER JOIN OPOR T1 ON T0.DocEntry = T1.DocEntry
    WHERE  T1.DocType = 'I' AND T1.Series = '142' OR T1.Series = '145' AND T0.[WhsCode] = 'STEX-01'
    or T0.[WhsCode] = 'STNEX-01' and T1.[UserSign] ='1'
    and T1.docentry = @list_of_cols_val_tab_del)
    BEGIN
    SELECT @error = 1
    SELECT @error_message = 'Not allowed to add PO'
    END
    END
    warm regards,
    Guhan

  • Any solution for 4280 error when using Itunes to burn CDs?

    Any solution for 4280 error when using Itunes to burn CDs?

    http://support.apple.com/kb/TA38101?viewlocale=en_US

  • What is a valid location for autorecovery files when using Word for MAC?

    What is a valid location for autorecovery files when using Word for MAC?

    Microsoft Word for Mac support forums is probably a better place to ask.

  • Can I use thunderbolt display to play xboxone?

    Can I use thunderbolt display to play xboxone? I just do not want to buy another TV, thanks .

    Shoot. I was afraid of that. Have you ever done anything so stupid!!!?
    Thanks so much for the response. I'll try to dig another up. An expensive klutz move.

Maybe you are looking for