NO AUDIO FOR VIDEOS WHEN USING INTERNAL CAMERA

My Iphone 5 stopped recording sound when I switch cameras. Well, there is sound..an intense hissing and if I listen really hard I can make out a whisper of the recorded audio. Also no one can hear me when I use speaker phone during calls.
Music plays fine on speakers.
Videos recorded on normal camera have perfectly clear audio.
There is no water or physical damaged. (checked water damage indicator and I take great care of my phone)
Ive tried factory reset and Turning off my phone.
Can someone please provide me with some insights?!

I am not blocking the microphones. I am well aware where the 3 microphones are located, and the sound isnt low..It's loud hissing feedback.

Similar Messages

Only imports audio, no video when using DSLR .mov files

I just upgraded to CS6 on my Mac Lion. I created a project using the DSLR settings and tried to import a .mov video clip taken from my Canon 5D camera. Strange thing is it only imported the audio and not the video. I tried many of clips and just audio.
As tests, I tried importing a .mpeg clip from an HDV camcorder and it worked fine. I also changed the extension of the DSLR clip to .mpeg and it still didn't work. The DSLR clips imported fine in CS4, but not CS6. Also as another test, I tried importing on a different Mac computer using Premiere Pro CS6 (from creative cloud) and it imported perfectly. So I'm not sure why it's doing it on my computer? The files open fine in QuickTime.
The only thing that worked was I exported the .Mov files from the DSLR to a HDV .Mov file and it DID import correctly. I don't want to have to go through that step everytime though (or loss the quality)
Any ideas why this is happening? Thanks

I too am having this problem. The video I am trying to import is a .MOV file from a Canon 5D Mark III. When I check the properties of the file in Premiere Pro 5.5, this is what it says:
File Path: S:\Photos\5D mark 3\Video\0F2A0089
Type: QuickTime Movie
File Size: 55.7 MB
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:00:15:07124
Average Data Rate: 3.7 MB / second
QuickTime Details:
Movie contains 1 video track(s), 1 audio track(s) and 1 timecode track(s).
Video:
There are 453 frames with a duration of 1/29.97th.
Video track 1:
Duration is 454
Average frame rate is 29.91 fps
Video track 1 contains 1 type(s) of video data:
Video data block #1:
Frame Size = 1920 x 1080
Compressor =
Quality = Least (1.00)
Audio:
Audio track 1 contains 1 type(s) of audio data:
Audio data block #1:
Format = 16 bit - Stereo
Rate = 48000 Hz
Compressor = sowt
Timecode:
Timecode track 1 contains 1 type(s) of data:
Timecode data block #1:
Start Time = 00;00;39;04
Reel name =
As you can see PP 5.5 notices the video; it even tells me the # of frames in the video but it won't display it. It might be worth saying the video files from my Canon XF100 work just fine. This is extremely frustrating. Any help would be very much appreciated.

Error Message for Videos when using 2 computers and 1 iPod Nano 5th Gen

I have a 5th Gen iPod Nano and a PC (XP) and Laptop (Vista). I store my free digital copies of movies on the Laptop and all other media on the PC. I have both computers set to share iTunes libraries. When I tried to sync some TV shows from the PC to the Nano I got this error message: The iPod "xxxx" is currently linked to another iTunes library on the computer "xxxx". In order to copy the TV Show "xxxx" to this iPod you must link this iPod with this iTunes library. Doing so will remove 3 movies including 'xxxx' from this iPod.
Questions: 1)Why only videos and not music or podcasts? No problems with any other syncing and don't lose my music from the PC when I sync movies from the laptop. 2)Is there a fix for this?
I was able to do a work-around by copying the TV shows to a USB memory device and then transfering them to the iTunes on the laptop. I could then sync both the movies and the TV shows to the Nano.
I'm new at this iPod stuff and would appreciate your input.
Thanks.

Does this problematic song play okay in iTunes? Have you tried removing and resyncing it to your device via iTunes?
B-rock

HD PowerShot camera whose audio for video of rock concerts is decent?

Many years ago, I bought a Canon PowerShot SD870 IS Digital ELPH. I loved the camera as it not only took good pictures, but the sound quality of videos I took of live metal and rock concerts was outstanding.
Then, the camera broke after many years of good use.
Since then, I have purchased several new PowerShot cameras only to find that the sound quality of the videos from live shows is awful. The sound is severely distorted by procession instruments (bass and drums).
Can anyone recommend an HD PowerShot camera whose audio for video of rock concerts is decent? I don’t want a dedicated video camera.
Thanks much -- Denis

Many years ago, I bought a Canon PowerShot SD870 IS Digital ELPH. I loved the camera as it not only took good pictures, but the sound quality of videos I took of live metal and rock concerts was outstanding.
Then, the camera broke after many years of good use.
Since then, I have purchased several new PowerShot cameras only to find that the sound quality of the videos from live shows is awful. The sound is severely distorted by procession instruments (bass and drums).
Can anyone recommend an HD PowerShot camera whose audio for video of rock concerts is decent? I don’t want a dedicated video camera.
Thanks much -- Denis

Abap Logic for performance tuning not working when using Internal tables

Hi,
I wrote this piece of code that is working correctly that is select SUM of cost from DSO where Plant is the same for Sales Items.
LOOP AT RESULT_PACKAGE INTO rp.
SELECT SUM( /N/S_STRDCOST ) FROM /N/ADSP_DPIT00 INTO
rp-/N/S_STRDCOST
WHERE /N42/S_SALESITEM = rp-/N42/S_ITEMID AND /N42/S_PLPLANT EQ
rp-/N42/S_SOURCE.
MODIFY RESULT_PACKAGE FROM rp.
Clear rp.
ENDLOOP.
Now I try to rewrite it for performance tunning using internal table but I am getting 0 values. can't figure out whats the problem and been struggling fixing it.
TYPES : begin of ty_DSO_TABLE,
         /N42/S_STRDCOST TYPE /N/ADSP_DSPC00-/N/S_STRDCOST,
         /N42/S_ITEMID TYPE /N/ADSP_DSPC00-/N/S_ITEMID,
       end of ty_DSO_TABLE.
DATA: it_DSO_TABLE type hashed table of ty_DSO_TABLE with unique key
/N/S_ITEMID,
     wa_DSO_TABLE type ty_DSO_TABLE.
Field-symbols: <rp> TYPE tys_TG_1.
LOOP AT RESULT_PACKAGE assigning <rp>.
clear wa_DSO_TABLE.
Read table IT_DSO_TABLE into wa_DSO_TABLE with table key /N/S_ITEMID
= <rp>-/N/S_ITEMID.
if sy-subrc ne 0.
      select SUM( /N/S_STRDCOST ) into CORRESPONDING
      FIELDS OF wa_DSO_TABLE from
      /N/ADSP_DPIT00 WHERE /N/S_SALESITEM = <rp>-/N/S_ITEMID AND
      /N/S_PLPLANT EQ <rp>-/N/S_SOURCE.
     if sy-subrc eq 0.
          <rp>-/N/S_STRDCOST = wa_DSO_TABLE-/N/S_STRDCOST.
     endif.
endif.
ENDLOOP.
Any idea whats wrong with the code
thanks

Hi Vaidya,
According to the code which you have written, there is no value in table IT_DSO_TABLE when you are trying to read the values.And after the read statement you have given a condition for sy-subrc. Hence the select statement is actually not even getting executed. *Also you have not assigned the final value back to the ResultPackage.*_
So Kindly correct your code as follows:
Data: wa_dso type ty_DSO_TABLE.
LOOP AT RESULT_PACKAGE assigning <rp>.
clear wa_DSO_TABLE.
select SUM( /N/S_STRDCOST ) into CORRESPONDING
FIELDS OF wa_DSO_TABLE from
/N/ADSP_DPIT00 WHERE /N/S_SALESITEM = <rp>-/N/S_ITEMID AND
/N/S_PLPLANT EQ <rp>-/N/S_SOURCE.
if sy-subrc eq 0.
<rp>-/N/S_STRDCOST = wa_DSO_TABLE-/N/S_STRDCOST.
MODIFY RESULT_PACKAGE FROM <rp>.
endif.
ENDLOOP.
Hope this helps you.
Regards,
Satyam

Just downloaded photoshop cc on my pc, when using the camera raw filter noticed there are no descriptions for the sliders! Very difficult to edit photos. Already checked preferences.

Just downloaded photoshop cc on my pc, when using the camera raw filter noticed there are no descriptions for the sliders! Very difficult to edit photos. Already checked preferences. Anyone else have this issue?

They should be labeled....

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4) A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4)
A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

Sounds kind of stupid, but check to make sure that your iphone case cover is not blocking the edge of the camera lens. I had a silicone case on my 3S and when it got older, it started tot slip and the edges of my pictures were blurred.

Ipad background audio from video when multitasking

Hello.
This is a request if people can either feedback On their present experience or try this out themselves first and feedback.
I have an ipad 1. When ever i try to get background audio to play from video when multitasking in another app, eg safari, from any video app including plex, airvideo, vlc, and the original apple video app. All that occurs is that the icon changes to the ipod and a random song is played from my music library instead of the audio from the video i was watching. This does not matter if the video file is streamed or stored on the ipad itself.
There is one slight and occasional proviso to this, as at times if the video file is tagged in itunes as 'music' rather than 'movie' or 'tv show' etc then it does on occasions work, and on occasions youtube videos will play in the background. But most of the time these aspects also dont function int he background with the ipod icon instantly replacing which ever video app icon i tried to use in the background.
Now my sons iphone 4 manages to function correctly and always plays video in the background when multitasking.
I have asked this question before on this forum, with no response, so booked a visit to my local genius bar. Where they checked my ipad and agreed it wasnt working as ios should, then interestingly they attempted to do the same on an ipad 2 and it failed to work in exactly the same way. Their response was that this was obviously a fault of the ipad ios, possibly due to the ipad having a separate video app where as the iphone has video within its generic ipod app.
I did the usual by informing apple via of this bug through the feedback system, and requested that the genius bar do the same. But having thought about this, and failed to see any other users on this forum who are also puzzled at this lack of what i think is an important function, i wonder if this means that i am the only one who likes to listen to video when im browsing, so dont need it, or wether everyone elses ipads function as ios should do, and for some reason both my ipad, and the ipad 2 tested in the shop are at fault.
So can i request if others reading this can have a go to see if their ipad will play background audio from video when multitasking, or if the same problem occurs.
Thanks very much this is really appreciated.

Oops clicked the wrong button, I meant to click a 'helpful answer' as it hard to have a correct answer to such a question.
But thanks for the replies.
It looks like this is a bug in ios solely for the ipad, as it does work fine on the iphone although wonder which way the ipod touch will perform. interestingly it looks like i may also be in the minority of wishing to listen to video files as I browse:)
Which probably means apple may never get around to sorting it, as no one else uses the function.
Anyway thanks for the replies, if any one else wants to see the bug have a go and comment, i find it funny how I seem to be the only one to have found it to date.
R:)

Can I get audio through iPhone when using apple tv?

Can I get audio through iPhone when using apple tv?

What do you mean exactly? Are you wanting to output the audio to your iPhone while say watching a video on your Apple TV? If so, I'm afraid it's not possible. However, you should post this in the Apple TV forums for a better confirmation on then. There are some prettty knowledgable people who hang out there.
https://discussions.apple.com/community/appletv
B-rock

Pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

Problem is:
Flash Player for IE11 (which is the worst browser ever developed - BAR NONE) is a Microsoft product, when it comes right down to it.
Adobe writes the base code and yes, they do collaborate on updates for it, but the gang in Redmond alter the plug-in and add "proprietary" code before embedding it, and at that point it's "their baby".
There are two (2) registry keys - 1 for 32 bit IE and the other for 64 bit IE, as well as a KB patch that prevent all but the most experienced Windows users from ever touching the Flash Player plug-in for IE. So there's NO WAY you could have done a clean install of the ActiveX plug-in in Windows 8. Unless you're an uber-geek, you can only update it through Windows Update.
WIn 8 is an abomination and IE11 made it worse. IE has always been the "problem child" of browsers, failing to handle CSS, Javascript, some PHP and most design "tweaks" that good webmasters can use with other browsers, trouble free.
I have IE8 on XP, 9 on VIsta, 11 on 7, 10 on 8 and 11 on 8.1... but they're all for testing only. I'd have to be out of my mind to ever think of using IE as my primary browser. ActiveX controls have to be disabled formost stuff and that opens millions of security holes in IE.
You've got a good video card and a decent sound card. It's a shame to waste them on a pile of garbage like IE, just because it came with Windows.

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

When using the camera, the odd time the screen will go purple and the phone would freeze?

I went to take a picture today, when I did the screen went purple and the phone froze for about 15 seconds. It worked fine for about 10 mins then I got another error "NO SIM CARD INSTALLED". Has anyone else had these issues, and what are  doing to sort them out!?

Thanks for the reply, I actually did that and the phone is working again but is that it or will it be a recurring issue? Plus the purple error when using the camera is very annoying, considering how much the phone is!

How to solve power error when using USB camera adapter in your camera

Hello Everyone,
First of all I wanna say reducing the output of the USB camera adapter from 100mA to 20mA just to save battery life is by far the most incredible adjustment in the history of @)#*$#%*($#!
I know most of us bought the USB Camera adapter so we can use it as a USB adapter for the Camera (saves us from taking the memory card on and off the camera) but sadly the "Ginues Apple" reduced it to 20mA which decreases the range of cameras and flash drives that will work with it. I use Gopro Hero 3+ black and everytime I plug it with the adapter to my ipad I keep on seeing this @#@$#@ power error. I didn't want to waste the expensive adapter so I tried to look for a micro sd card reader but I don't think 20mA readers still exist.
Now to solve this problem is very simple add a power source to help that 20mA up, most of the my friends bought a powered port hub but it's not my type because it's bulky, needs an outlet and not portable.
So I found a better solution on how you can add a power source and still be portable, the answer is power bank or portable charger.
Things you need:
Camera
USB camera adapter (Ginues Apple product)
Power bank (I'm using 8,400 mAh)
Dual USB Male to 5 Pin Mini USB Y Cable
Ipad
Procedure:
Camera --- 5 Pin Mini USB ------------------ USB camera adapter ---------- Ipad
'---------- Power Bank
Attach you camera to the 5 pin mini usb then the USB1 male to the female apple's USB camera adapter then to the Ipad. = this will show the power error.
Then attach the USB2 to the power bank/portable charger to power it up.
your welcome

yocto yotta wrote: How to charge iPad Air when using the camera connection kit?
No can do, Skippy!

Charge for texts when using iMessage

Why am I charged for texts that include photos or video when using iMessage to send or receive with other Apple products? Should the senders use an email address instead of my iPhone number? I have ATT with pay as you go texting. I'm only charged when there's a photo or video attached.

Hi Garypsu,
Thanks for using Apple Support Communities. This article has some steps you can try if iMessages aren't sending correctly:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If you still can't send or receive iMessages
Ensure that iMessage is turned on in Settings > Messages.
To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
iPhone: Troubleshooting Cellular data
iOS: Troubleshooting Wi-Fi networks and connections
iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
Step 4 above describes how to turn off having failed iMessages send as texts to prevent this from happening.
Cheers,
- Ari

Is there an adapter or something you can use on a iPhone 5 that will let you watch video when using an AUX cable?

Is there an adapter or something you can use on a iPhone 5 that will let you watch video when using an AUX cable?

if you by AUX mean composite or component then likely not as they would not be able to support a high enough resolution to do any type of airplay mirror
hdmi should work though
http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
there is also the vga version but vga don't carry audio so it may not be that fun
http://store.apple.com/us/product/MD825ZM/A/lightning-to-vga-adapter

NO AUDIO FOR VIDEOS WHEN USING INTERNAL CAMERA

Similar Messages

Maybe you are looking for