No audio from captured clips in Timeline

I captured footage onto my FCP. Video and audio played fine in the window that immediately comes up but after I saved it to my bin in my browser and then put it in the timeline I lost audio. The levels are moving and it says Av1 and Av2 in the logging area as well seeing the audio waves.
I disconnected the camera that I am using to capture the footage.
HELP!!! It seems like I have to press one simple button but I can't figure it out.
HELP!!!

http://discussions.apple.com/thread.jspa?messageID=6055347&#6055347
Also check your speakers

Similar Messages

How do I use just the audio from a clip in imovie? No picture, no video, just audio!

I want to put the audio from a clip at the end of the video. No video, just black screen

It will require a bit of a workaround. But it can be done. If you enable Advanced Tools under the iMovie Preferences (Go to the iMovie Menu > Preferences). Enable Advanced Tools by clicking the checkbox.
Now create a title with a black background by dragging at title to the end of the video on the Project timeline. Once the title is there, delete all the text on the title. Now drag that black background directly dead center onto the video clip just before the end where you want to 'blot out' the video and just have audio. When you release the mouse, you will be shown a pop-up menu with a bunch of different options including one titled cut-away. Choose this option. What will happen is the video will cut to the black video background you dragged on top of the video clip. You can set the duration by dragging the left and right edges out further to make it run longer. This black back ground effectively cover the video and will continue to play the audio of the underlying video clip.

Extracting audio from video clip to use as narration?

Hi there,
I have a video clip in which I want to take the audio of actor speaking and put it onto another video.
I.e. he is speaking about walking in the park. I want to take him speaking about walking in the park and put it onto the clip where he is actually walking in the park.
How do I do this in premiere elements 10?

Hi Bill,
Thanks for the quick response. I guess my question now is how would I do those two things?
In terms of exporting the audio, where can I find that option when I'm on timeline?
What do you mean by "Alt-click" and what is a "muxed file"?
Thanks again,
Mallory
Date: Fri, 13 Jan 2012 19:01:51 -0700
From: [email protected]
To: [email protected]
Subject: Extracting audio from video clip to use as narration?
    Re: Extracting audio from video clip to use as narration?
    created by Bill Hunt in Premiere Elements - View the full discussion
Welcome to the forum. There are several ways to accomplish this, and your choice might well rest on how you like to work, and what you are doing, such as Deleteing Video. First, you could Export/Share just the Audio as a PCM/WAV @ 48KHz 16-bit, from your Timeline, and Import that into a New Project, where the Audio WAV file would be used. OTOH, you could Atl-click on the Video portion of the muxed file, and Delete the Video, leaving only the Audio portion. Good luck, Hunt
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4139273#4139273
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4139273#4139273. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How can i leave audio from one clip playing, while showing another one in i

i am editing a movie, using iMovie 08, and want to use sound for a clip in the video for the end credits. how can i do this?
just to be clear, i am not trying to add audio. i am trying to leave the audio from ONE CLIP playing, while viewing a new frame. thanks.

This is simple in iMovie 11 (drag and drop), but in iMovie 08, you can still do it.
[See this blog post for details|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.htm l]

How do I use just the audio from a clip without the video?

Can't remember how to use just the audio from a clip, without the video. FCP X can't select like FCP&

Edit just the audio into the timline.
The disclosure triangle next to the edit buttons.

Detaching audio from video clips

Hi
After trying the standard 'detach audio' button I cant seem to find a way to completley detach audio from a clip in order to hear the track I have added to the clip. All I can seem to do is turn the volume right down, and inturn still able to hear it, which is proving annoying!
Any ideas would be appreciated!
Thanks

Thanks for your reply Geoff,
I basically have a soundtrack 3.28 minutes long which I want to be the only noise thats playing throughout my interchanging video clips, so I would like to completley move the audio from the all of the indivdual video clips that I am adding in, I thought the 'detatch audio' button would be the one for this, but as I continuously play back bits of the movie to prefect editing I can still slightly hear the sound from the individual videos that I am adding?
So frustrating, but Im sure thats its something real basic that I am missing.....

Extracting audio from many clips at a time

I have to extract some audio from many many video clips, so I was attempting to do it in one step, but Logic extract only from one clip at a time
So I'm thinking to use Audio Converter (it can extract audio from many clips in one step), but it ask me the AIFF encoding Bitrate (among 64 and 192 kbps). So I'm wondering... but Logic which AIFF bitrate manages???
Tnks

yes, it is possible. Infact, it is the normal practice to add those 10 roles to that single user in SU01 direclty.
and as I said, user comparison should be scheduled normally in SAP system landscape to do the things automatically, however not immediately but after some time.
http://help.sap.com/saphelp_nw04/helpdata/en/52/6714a9439b11d1896f0000e8322d00/content.htm
If you want user comparison immediately, then you need to do it manually in the role.

Audio from video clips

I tried combining video clips into one movie through imovie, the video was there but not the audio from the clips. What can I do to fix this?

The conversions played sound in QT, but no sound in the editor... What can I do so I don't lose the audio?
Open the Event file(s) with the QT Player and check the "Inspector" window to make sure the file, as imported to iMovie '08, still has its audio track in tact. If it does and the missing audio is limited to scrubbing Event files, check the audio switch under the preview window to see if it is off. If no audio is present in normal playback/preview mode, then thumbnails could be bad and you might try re-thumbnailing the events. If the problem is on the project side, try duplicating the project and see if the duplicate has sound. If you still don't have audio, try trimming the duplicate project to a very short sequence and exporting it to see if the output has audio. This assumes you have audio everywhere else and it is not a system wide problem like muting, system sample rate switched to a different setting, system volume turned down, etc...

Suggestions for blending audio from one clip to next?

I'm learning editing and PP and am practicing by editing different clips from a movie to make my own trailer. The problem I'm having is that going from one clip to another has obvious and abrupt changes. I could add audio transitions to each clip, though for a 2.5 minute trailer I'm not sure if fading audio up and down constantly is the best choice? What is the best way to blend the audio from one clip to the next?
Thanks.

You can create a crossfade (essentially an
audio dissolve) from one audio clip to another.
With the audio track(s) targeted, park the Playhead at the
audio cut and hit Ctrl+Shift+D (or drag from the effect panel):
You need to be sure you have sufficient 'handles'
on both clips to accommodate the crossfade.
Creating an audio crossfade
http://tv.adobe.com/watch/learn-premiere-pro-cs6/creating-an-audio-crossfade/

How do I put the audio from one clip over the video of another clip?

So I have two videos, and I want to replace the audio of the first with the audio of the second. Sorry, I'm new to 08 and have been trying to suss this out for ages so I'd really appreciate any advice you guys can give.

This thread seems to be on the same subject and is very helpful.
http://discussions.apple.com/thread.jspa?threadID=2072620&tstart=50
The Working with Audio clip also included the solution for extracting the audio from a clip at the very end of the video. Having to know the secret handshake of shift-command and dragging is really not intuitive, but such is progress....

No audio from video clips

I am only getting audio from the clips when I first start a sequence. When i drag it in the new iteam box in the project window in Premiere pro cc.

1st, More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
2nd, What are you editing?
Codec & Format information, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

How do you overlay the audio from a clip over a iphoto slideshow clip ?

How do you overlay the audio from a clip over a iphoto slideshow clip ?
I want the audio from a video clip to be playing over the jpg/slideshow iphoto images ...so you see the slideshow elements but do not see the clip but do here the audio !
thanks ! HELP!

How do you overlay the audio from a clip over a iphoto slideshow clip ?
"Command-Shift-Drag" the Event clip containing the audio you wish to extract and "pin" it to the slideshow already in the Project window.

How to Delete several Audio clips from Video clips on Timeline of APPro CS5

I would like to know how to delete multiple audio clips from Video clips at once in time line in APPro CS5? Please advice step-by-step procedure. I can DELETE audio from a single Video clip. But I wanted to DEL Audio from multiple video clips. Your help is much appreciated. Thanks

Thanks for the advice given by Shooternz, Colin and Jim. Your help is much appreciated for a beginner like me... Jim's idea was also good..It worked for me and also safe if I need to use the original audio. Following method also found good...but previous audio clip cannot be extracted after deleting it. ... 1. Hold down "ALT" key first then select the first audio clip in the chain of video clips to Delete. 2. Hold down " Shift + Alt " keys together and click right mouse button on all audio clips to be deleted one by one. Make sure only audio clips are selected. 3. Then release ALT+Shift keys and then click right mouse button and select "Clear" from pull down menu to Delete all selected audio clips on the time line. This method works very well for me. Thanks for every one who has adviced me how to do it. Thanks guys... If u all find better method tha above...please inform us. Thx.

How do I extract audio from a clip?

I've tried to select a clip in the timeline then go to clip/audio optins but audio extract is always grey... I'm trying to pan audio into the next clip.

No need to extract it to apply fx or mix / pan it.
I f you want audio only from a clip ...you can drag clip to Source Monitor and then Drag Audio Only from there to Timeline / sequence

Can one copy Audio from one clip minus its video...to paste to another?

I'm working on a painting video...as an artist/teacher...and easily created a 3 minute trailer on YouTube using iMovie...
http://www.youtube.com/watch?v=8LXWxjjGkAg
I have Final Cut Express 3.5.1 on my intel...and thought I'd best use this higher standard software for the making of my 90 minute DVD...but dang, its coming hard for me. Trying to make sense of the help manual. With iMovie it was nothing to copy an audio track, copy and paste elsewhere...but with FCE I can't seem to separate the audio of the track from one clip to copy and paste elsewhere without that video clip wanting to come along.
The original clip is me painting by a waterfalls..the original narrative voicing was weak, so I did a voice over with a mic and toneport tonight, now I want to paste in the sound of the falls behind copied from a clip where I did no speaking.
I have Soundtrack as well. Am I better off just putting my video clips together in FCE...then importing the whole thing to Soundtrack to edio audio? Seems audio with FCE is tough...well, for me anyway. Thanks

Hi -
In FCE, select the clip on the timeline that has the audio and video stuck together. Go to the menu Edit and toggle Linked Selection (the check mark will go away).
Now you should be able to copy and paste one without the other.
Hope this helps.
MtD

No audio from captured clips in Timeline

Similar Messages

Maybe you are looking for