No audio from dock when using VGS adapter

Anyone else having this problem? I get fine audio output from the dock, but when I plug in the VGA adapter, the audio is muted. It only comes out of the iPad internal speakers. I cant find any settings to change this.
Any help would be appreciated.
Win

I took it to a local Apple centre and it turned-out to be a faulty keyboard dock.

Similar Messages

Accessing data from schema when using ftp adapter

Hi all,
Below is an example of the data i receive from my ftp adapter, i read the entire file into my schema:
<Header>
<batch_filler1>*BATCH</batch_filler1>
<batch_number>08110</batch_number>
<batch_date>20090417</batch_date>
<batch_extra>KW1310</batch_extra>
</Header>
-<Detail>
<cost_centre_comment>W1310</cost_centre_comment>
<cost_centre_code_comment>01310</cost_centre_code_comment>
<amount>-3000.00</amount>
<filler1/>
<payment_method>T</payment_method>
<description>TSHWANE MULTI SKILL FEATURE CONTRACTORS</description>
<receipt_number>338516</receipt_number>
<date_comment>20090417</date_comment>
<bill_to_cust_id>11748885</bill_to_cust_id>
<ref_value>999999</ref_value>
<detail_extra/>
*</Detail>*
-<Detail>
<cost_centre_comment>W1310</cost_centre_comment>
<cost_centre_code_comment>01310</cost_centre_code_comment>
<amount>-1870.00</amount>
<filler1/>
<payment_method>T</payment_method>
<description>UNIVERSITY OF SOUTH UNIVERSITY SOOUTH AF</description>
<receipt_number>338517</receipt_number>
<date_comment>20090417</date_comment>
<bill_to_cust_id>10414916</bill_to_cust_id>
<ref_value>048630</ref_value>
<detail_extra/>
*</Detail>*
-<Detail>
<cost_centre_comment>W1310</cost_centre_comment>
<cost_centre_code_comment>01310</cost_centre_code_comment>
<amount>-300.00</amount>
<filler1/>
<payment_method>T</payment_method>
<description>VET & AGRIC CONSULTA RB JACKSON</description>
<receipt_number>338549</receipt_number>
<date_comment>20090417</date_comment>
<bill_to_cust_id>11462639</bill_to_cust_id>
<ref_value>048893</ref_value>
<detail_extra/>
*</Detail>*
-<Trailer>
<cost_centre>W801408014</cost_centre>
<amount>18467.13</amount>
<trailer_extra>GROOTTOTAAL VIR W8014/8014 OP 20090417 BONDEL 08110 08110 20090417</trailer_extra>
</Trailer>
As you can see i have multiple data for Detail, i need to loop through my schema for Detail and take the values and pass it on. How do you reference a particular Detail in bpel ?
An example would be if i want the 2nd Detail amount which is -300.00, do i reference it with a [1] as in arrays ?
Thanks

it depends on what you want to do. Generally waht people do is map to a partner link, e.g. another service. In most situations the same structure is required for the target.
The transform activity is the best way to many multi nodes. You have the choose / if conditions that allow you to test conditions, if they match then you perform the map.
One thing that catches people out is the use of the for-each, if this is not specified only one row is mapped.
http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28987/phase6.htm#sthref405
cheers
James

HT4589 How do I change the audio to dual mono from stereo when using Share to DVD in Final Cut 10.1?

How do I switch the audio to Dual Mono from Stereo when using Share in Final Cut Pro 10.1? Even though the audio is all in dual mono in the timeline, it lists it as stereo in the share box.

Hi rationale1,
Welcome to the Support Communities!
The share to DVD settings in Final Cut Pro X use the Dolby Digital settings which are stereo for DVDs. So this can’t be done directly in Final Cut Pro X.
The link below will explain the Dolby Digital parameters and options in Compressor 4. You may need to research a different DVD authoring software to achieve your desired result.
Dolby Digital - Compressor 4 User Manual
http://help.apple.com/compressor/mac/4.1/#cpsrb71736a2
Dolby Digital
The built-in Dolby Digital settings (in the Create Blu-ray and Create DVD destinations, as well as the built-in AC-3 and EC-3 audio settings) use the Dolby Digital transcoding format. This format encodes Dolby Digital (AC-3) and Dolby Digital Plus (EC-3) audio files that contain multiple audio channels, including 5.1 surround sound. You can also create custom settings that use the Dolby Digital transcoding format.
Note: All files intended for video and audio DVD authoring must have a 48 kHz sample rate as required by the DVD specification.
DVD Video: Choose this option if you’re encoding for use in a DVD video authoring application.
DVD Audio: Choose this option if you’re encoding for use in a DVD audio authoring application.
Tip: For stereo encoding, rates of 192 kbps and 224 kbps are typical and will produce good results. For Dolby Digital 5.1 encoding, a rate of 384 kbps is recommended. For 5.1 Dolby Digital Plus encoding, a rate of 192 kbps is recommended.
Cheers,
Judy

Ipad background audio from video when multitasking

Hello.
This is a request if people can either feedback On their present experience or try this out themselves first and feedback.
I have an ipad 1. When ever i try to get background audio to play from video when multitasking in another app, eg safari, from any video app including plex, airvideo, vlc, and the original apple video app. All that occurs is that the icon changes to the ipod and a random song is played from my music library instead of the audio from the video i was watching. This does not matter if the video file is streamed or stored on the ipad itself.
There is one slight and occasional proviso to this, as at times if the video file is tagged in itunes as 'music' rather than 'movie' or 'tv show' etc then it does on occasions work, and on occasions youtube videos will play in the background. But most of the time these aspects also dont function int he background with the ipod icon instantly replacing which ever video app icon i tried to use in the background.
Now my sons iphone 4 manages to function correctly and always plays video in the background when multitasking.
I have asked this question before on this forum, with no response, so booked a visit to my local genius bar. Where they checked my ipad and agreed it wasnt working as ios should, then interestingly they attempted to do the same on an ipad 2 and it failed to work in exactly the same way. Their response was that this was obviously a fault of the ipad ios, possibly due to the ipad having a separate video app where as the iphone has video within its generic ipod app.
I did the usual by informing apple via of this bug through the feedback system, and requested that the genius bar do the same. But having thought about this, and failed to see any other users on this forum who are also puzzled at this lack of what i think is an important function, i wonder if this means that i am the only one who likes to listen to video when im browsing, so dont need it, or wether everyone elses ipads function as ios should do, and for some reason both my ipad, and the ipad 2 tested in the shop are at fault.
So can i request if others reading this can have a go to see if their ipad will play background audio from video when multitasking, or if the same problem occurs.
Thanks very much this is really appreciated.

Oops clicked the wrong button, I meant to click a 'helpful answer' as it hard to have a correct answer to such a question.
But thanks for the replies.
It looks like this is a bug in ios solely for the ipad, as it does work fine on the iphone although wonder which way the ipod touch will perform. interestingly it looks like i may also be in the minority of wishing to listen to video files as I browse:)
Which probably means apple may never get around to sorting it, as no one else uses the function.
Anyway thanks for the replies, if any one else wants to see the bug have a go and comment, i find it funny how I seem to be the only one to have found it to date.
R:)

Can I get audio through iPhone when using apple tv?

Can I get audio through iPhone when using apple tv?

What do you mean exactly? Are you wanting to output the audio to your iPhone while say watching a video on your Apple TV? If so, I'm afraid it's not possible. However, you should post this in the Apple TV forums for a better confirmation on then. There are some prettty knowledgable people who hang out there.
https://discussions.apple.com/community/appletv
B-rock

How to transfer range parameter from vb when using bapi calling

Hi,everyone.how to transfer range parameter from vb when using BAPI calling?

Did you get the solution to your problem? Can you please share it with me. I have a similar problem. I have a VB program that calls RFC function. It works with a single parameter but not with a range of parameters. If you have the solution, could you please share sample codes with me? Thank you so much.

I am unable to get dragging guides from rulers when using CS6 InDesign. Is anybody else getting this problem?

I am unable to get dragging guides from rulers when using CS6 InDesign. Is anybody else getting this problem?

Try restoring your InDesign preferences:
Trash, Replace, Reset, or Restore the application Preferences

Dock when using Safari

I can not see the dock when using Safari. When othere programs are used it is OK

Move your cursor to the top right of the screen, wait for the menu bar to appear (should just take a second), and click on the two arrows facing each other.

Use DK39 charging dock when using a SCR12 cover on my Z2 tablet?

Can I use the DK39 charging dock when using a SCR12 cover on my Z2 tablet?
Thanks in advance

2) that is normal if you want the home launcher to rotate without the need of the dock or magnetic cable you'll need to download a third party home launcher.

How to handle the failed records from the table when using DB Adapter

Hi,
I am reading some records from table using DB Adapter inside my synchronous BPEL process. Say like reading 100 records from table in between after successful reading of 90 records an error occured in 91st record due some various reasons(like DB down, Connection interrupted etc.). Then how to handle this situation, whether i have to read all the records from the begining and is there any option to continue from where it stopped reading.
Can please anybody help me out in the regard?
Thanks in advance
Regards,
Aejaz

we had the same requirement some time ago and had two option:
1. ask the R/3 development team add a deletion indicator in the table (and thus not actually deleting the record). this deletion indicator could then be used like for any other standard datasource
this option was however refused, due to huge data volume after a while
2. at the end of the load we copied the ZTABLE1 to ZTABLE2. then in the begin of the load (day after) we compare the data of table1 to table2. entries available in table2 but not in table1 are deleted, and we put a 'D'. in deletion indicator; as we only keep the deleted entries for one day, the volume of the new table is acceptable.
M.

X240 - is there audio pass-through when using a miniDP to HDMI?

I have an X240, which I love, but now that I've cut my cable cord and am going with Netflix and other on-line streaming options, I'd like to be able to view my streaming programs on my TV. Can I use a cable or adapter to go from the miniDP (on the X240) to my HDMI (on my TV) and get audio as well as video? I understand my laptop needs to have an "audio pass-through" for that to work --- I don't know what it is, but I'd like to know if this one's got it. I bought the laptop online in Dec 2013, if that makes a difference.
(Yes, I could stream Netflix from a gadget like Chromecast, but that will only get me Netflix Canada, whereas using a VPN on my computer I can get Netflix from other countries too.)

refreshing this discussion! I've tried a mini DP to HDMI dongle with an HDMI-HDMI cable to the TV - and I get video but no audio. My computer recognizes the TV as present as as audio playback device, but no audio is transmitted through TV or computer. when it's plugged in. Of course I still get audio from the computer's speakers when it's not plugged in

Tactic 3D Sigma - No audio from right side using USB?

Just got my new Creative Sound Blaster Tactic 3D Sigma (phew, that's a mouthful) headset in the mail today. When I connect it to my laptop using the USB adapter, there is no audio from the right side, only the left. When I connect using analog, though, the headset works fine.
I'm on Windows 7 Professional 64-bit, and I have the latest Creative software and headset drivers installed.

Hmmm... sounds like something is wrong with the USB adapter. Did you purchase the headset direct through Creative Online Store or from your local electronics store? If you bought the headset from your local electronics store, please get in touch with them right away, these stores usually have a 30 day exchange policy.
If you purchased this through the Creative Online Store, please write to our Customer Support and ask for an RMA (Return Merchandise Authorization).

How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
Check your MacBook Pro model year against the list in this Apple tech note:
About Mini DisplayPort to HDMI adapters
Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

No sound from TV when using HDMI from HP Envy Ultrabook4 despite downloading drivers

Problem: When using an HDMI cord from my HP Envy Touchsmart Ultrabook 4 (4-1105dx)to connect to my TV to view movies, the video appears on my TV screen, but there is NO sound from the TV. Instead the sound comes from my lap top.
Troubleshooting: I have looked under Sounds in the Control Panel, but the only choice listed is Speakers & Headphones IDT High Definition (which is the default) and does not allow sound from the TV when using the HDMI. I have also tried to download Driver and Audio Graphics, but wasn't sure which one & the ones which were downloaded have not solved the problem.
Can you assist me? Which is the correct Audio/Graphic Driver to download? Or is there another possible reason why I cannot hear sound from my TV when using the HDMI to connect to my lap top?

Hi,
Please try this first to enable Speakers in Playback devices as follows:
1. Right click speaker icon (bottom right hand corner)
2. Select Playback devices
3. Right click HDMI sound
4. Enable it
5. Click Apply/Ok
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Issue with " " in file when using file adapter

Hi,
Iam using FIle adapter to load the data from file to a table.
Every thing is working fine, but when ever the record in the file has " " in the data it fails.
Eg:
12|"LOG" logo|Y
I am using file adapter with delimiter | and empty in enclosed by.
When I intiate the process it throws saying expected delimited | but could not be found . But I am not using any enclosed by clause so it should not check for | after ".
Any one have any ideas or face this kind of problem.
Thanks

Hi,
Even i faced this issue before...the problem with file adapter is the attribute nxsd:quotedBy takes " as default even if u dont mention it takes the same and now after the quotes it immediately expects | wch is not there in the data and it throws the error...now the fix for the problem is put some symbol for nxsd:quotedBy wch u never expect in the data some thing like less than or greater than symbol ....some thing like below
<element name="FieldTwo" type="string" nxsd:style="terminated"
nxsd:terminatedBy="|" nxsd:quotedBy="<"/>

No audio from dock when using VGS adapter

Similar Messages

Maybe you are looking for