No audio from ipad2 to TV when using HDMI

Hi
I'm having exactly the same problem.
I have 2009 macpro
I worked out I can get visual from HDMI 3 and no picture.
Sound comes though PC1
Did you fix the problems?

Similar Messages

How can I get audio to play from my TV when using hdmi cable? Video looks great, just no sound.

How can I get audio to play from my TV when using hdmi cable? Video looks great, just no sound.
I've tried plugging the hdmi into the TV directly and the receiver.
I get video every time. HBO to Go , Xfinity, ABC, Youtube, etc...
just no audio. Any suggestions?
I've tried starting the apps then plugging in the hdmi cable.
I never tried this before I upgraded to IOS 5.

Claudiamil-
I had not tried it with mine since upgrading to iOS 5, so I just did. I'm using a small Vizio HDTV. I did not try YouTube, but did try several videos and musical numbers. In all cases there was sound, including stereo when the source had it.
I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down. Dah*veed's suggestion to reset may be what you need.
Fred

HT204291 Does anyone know why when streaming a movie from my iMac the screen on my tele goes grey but I still get audio. It only happens when using the DVD application on the mac. iPhoto streams fine.

Does anyone know why when streaming a movie from my iMac the screen on my tele goes grey but I still get audio. It only happens when using the DVD application on the mac. iPhoto streams fine.

You are prevented from Airplay mirroring certain things like DVD content as the material is usually protected so you get a checkerboard type display. I think there is a theoretical risk that the Airplay stream could be intercepted and the protected video copied, albeitin lower quality.
Apple may be being cautious or are required to do so with the DVD player app by movie studios/licensing authorities. It makes no sense to the average consumer who is just trying to send their purchased DVD to the TV via the computer and AppleTV.
Playback in something like VLC should work - not tried it myself but others have commented it doesn't have the restriction.

Can you watch video apps on an hdtv from an ipad 3 when using an hdmi adapter?

Can you watch video apps on an HDTV from an ipad 3 when using an hdmi adapter?

Yes, unless the developer of the app specifically prohibits it.The Apple Video app works fine.

MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is

MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is not an external device connected.

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

Why cant I send emails, or open folders, from my Outlook email when using ipad. My Outlook is functioning normally when accessed from laptop.

Why am I unable to send emails or open folders from my Outlook email when using my iPad? My Outlook is functioning normally when accessed from my laptop. This problem has been going on for three days now - everything was functioning normally before. I have looked at the standard troubleshooting suggestions provided by Apple, but they do not appear to cover this eventuality. I should be most grateful for any help.

Try first to Clear your cache from : Tools > Options > Advanced > Network, Clear Now button.
if the above is not helpful, [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles create a new profile] and check it again.
if you create the new profile see: [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles#w_recovering-information-from-an-old-profile Recovering information from an old profile]
thank you

I cannot hear the audio from my Apple TV when the speakers connected to an airport express is selected from AirPlay

I cannot hear the audio from my Apple TV when the speakers connected to an airport express is selected from AirPlay

me-p wrote:
Is it true?
for the time being, yes.
however, Airfoil can do what you want.

How do I remove an old username from the app store when using the update function

How do I remove an old username from the app store when using the update function.
I purchased my Mac used. The former owners username prepopulates when I try to perform the updated function on the app store. It does not allow me to use a different user name. I have created my own username and password. I have even been able to purchase items from the app store, it's just when I use the update function it does populate with my username. Any help is appreciated.

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

When using HDMI to HDMI cable the Master Sound Control is locked.

master sound control is locked when using HDMI to HDMI using an HDTV for the display.
Although itunes sound control works. Why is the Master Control locked?

cpfamilia wrote:
Hello,
I am new to OS X and i have tried to adjust the sound when plugged to the secondary monitor through HDMI which of course didn't work.
I have been using windows and a linux for years now, and everything works seamless.
I believe that this could be easily solved by Apple as long as their are willing to do it. Having a virtual device for sound control is not that difficult.
All the bests
There are two ways to 'solve' this.
Alter the volume before sending the digital signal down the HDMI connection, this means the signal is no longer exactly as it was originally. Apple's current (apparent) view is that this should be done at the end i.e. playback device not at the originating (Mac) end so as to minimise the number of devices making changes to the signal. Basically 'volume' is the amplitude of a an analogue wave form. (Where else do you think the term 'amp' comes from.)
Not to alter the volume of the signal at the Mac end but instead to send a signal down the HDMI cable to tell the end i.e. playback device to alter the volume, this uses a standard called CEC (Consumer Electronics Control), unfortunately at the moment no Macs support this standard - it has to be supported at a hardware level so a simple Apple software upgrade to implement this is not possible. I have previously logged an official enhancement request for this with Apple - the more people who do this the more likely it is to be added, since now all Macs include HDMI it might happen at some point.
As an addendum to option 2 above, see http://www.pulse-eight.com/store/products/104-usb-hdmi-cec-adapter.aspx this would however require software support in whatever application is being used. XBMC for Mac does support it.

Using just the TV screen when using HDMI port?

Hi,
I have the Macbook Pro with retina display and I was wondering how I could use just the TV screen when using HDMI port. I don't want mirroring displays, just one on the TV.

With the TV connected and the MBP plugged into the mains (i.e. not running on battery power) close the lid. The MBP will go to sleep, wake it up with an external keyboard or mouse - which must be connected in advance, or paired in advance if a bluetooth keyboard/mouse.

Bought av adapter to watch iPad on tv. Plugged it in iPad and received message not compatible. Both are apple products. Unable to view movies on tv from iPad. I also used hdmi cable

Bought av adapter to watch iPad on tv. Plugged it in iPad and received message not compatible. Both are apple products. Unable to view movies on tv from iPad. I also used hdmi cable

Every consider an AppleTV for same? no cables, no fuss, LOTS of free content, very handy.

No sound from TV when using HDMI from HP Envy Ultrabook4 despite downloading drivers

Problem: When using an HDMI cord from my HP Envy Touchsmart Ultrabook 4 (4-1105dx)to connect to my TV to view movies, the video appears on my TV screen, but there is NO sound from the TV. Instead the sound comes from my lap top.
Troubleshooting: I have looked under Sounds in the Control Panel, but the only choice listed is Speakers & Headphones IDT High Definition (which is the default) and does not allow sound from the TV when using the HDMI. I have also tried to download Driver and Audio Graphics, but wasn't sure which one & the ones which were downloaded have not solved the problem.
Can you assist me? Which is the correct Audio/Graphic Driver to download? Or is there another possible reason why I cannot hear sound from my TV when using the HDMI to connect to my lap top?

Hi,
Please try this first to enable Speakers in Playback devices as follows:
1. Right click speaker icon (bottom right hand corner)
2. Select Playback devices
3. Right click HDMI sound
4. Enable it
5. Click Apply/Ok
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

No audio on TV when using HDMI

Hello,
I just bought the Satellite P875-S7200 and I connected it to my HDTV using HDMI. The problem is there is no sound coming out on the TV but there is sound on the laptop.
I've checked the Playback Devices when you right-click the speaker icon from the taskbar and I don't see any HDMI option in there.
How can you switch the audio out to the HDMI?
Please help. Thank you very much.

Satellite P875-S7200
I've checked the Playback Devices .. and I don't see any HDMI option in there.
Right-click in that box and make sure you have the two items shown below checked.
-Jerry

Capturing error messages from Oracle EBS APIs when using Oracle Apps Adapter

We are using Oracle applications adapter to call Oracle EBS (both R11.5 and R12) APIs. I want to understand the best practice around error handling when using Oracle Apps Adapter to call Oracle EBS.
Here are some observations:
1. Most of the APIs return X_RETURN_STATUS and X_MSG_DATA containing the status and messages if any.
2. If the MSG COUNT is 1 then X_MSG_DATA contains the message, if MSG COUNT is > 1. X_MSG_DATA is empty.
We know that when calling the API directly from PL/SQL, we need to loop through FND_MSG_PUB to fetch all messages when there are more than 1. How do we achieve the same using Apps Adapter as Apps Adapter generates the PL/SQL block to call the API dynamically at runtime.
In some APIs, which have table/rec types as input or output parameters, Apps Adapter generates a wrapper package to do conversion from SQL--> PL/SQL and viceversa. In this case the adapter calls the custom package generated which internally calls the API. For these APIs we were able to put the logic to loop through FND_MSG_PUB and return a concatenated string as value of X_MSG_DATA.
But what should we do for the APIs which do NOT have a rec/table type as input or output, in which case the Apps Adapter directly calls the API and there is no intermediate custom package?
How are others handling this?

Please see the section "Handling Functional Errors" in the below link
Oracle Fusion Middleware Adapter for Oracle Applications User's Guide

Problem translating servlet name from an encoded URL when using HTTPS

Hello:
I am experiencing a wierd issue when using WLS 5.1 with HTTPS and am hoping someone might
be able to shed some light...
I have deployed a web application and am using HTTPS.
So, a typical call to a servlet is
https://foo.com/web_app_context/servlet_name/servlet_arguments
The servlet is used to upload files from disk to a database and to also download the same.
Therefore, the servlet_arguments string contains the file name among other things.
The problem seems to arise when the file name contains either a space or an
underscore e.g. "file_name" or "file name". It is then typically encoded as
"file%20name" in
the URL.
So a call then looks like:
https://foo.com/web_app_context/servlet_name/file%20name
When this request is sent to WLS, it seems to truncate the servlet_name by a couple
of characters causing the request to fail.
This works fine using HTTP.
Any thoughts would be much appreciated.
Thanks in advance.
Prashant

The JNDI call is different when you call an EJB from inside the J2EE.
ctx = new InitialContext();
ref = ctx.lookup("java:comp/env/<JNDI-Name>");
Regards
Stefan

No audio from ipad2 to TV when using HDMI

Similar Messages

Maybe you are looking for