No audio from my mpgs.

Everything works fine.
But when i drag my latest mpgs on the timeline (from my new sony point and shoot camera) I have no audio for them.
please help.

That *****.
I'm messing with that streammpg thing. Thank you btw. And I'm wondering if it can do a batch of like 50 at once, rather than one at a time.
hopefully i can modify my camera settings, but i don't know about that.
I did one and it seemed to have worked, so thanks

Similar Messages

Ripping audio from AVI

Hi,
I wasn't sure where to post this question. I didn't see a forum that looked apropriate, and since I'm using an iMac G5 I thought this one was as good as any other. So, what I'm after is software that will allow me to extract audio from AVIs, MPGs, etc. Any suggestions?
Thanks,
Andrew

Hi,
Just wanted to follow up on my original post. I first tried using a freeware AVI spitter called Explicit, then importing the 9-12 minute pieces into iMovie. There was a few problems with this method, though. First, it took around 15 minutes to import one 9-12 minute AVI segment. Second, after it was imported and converted into DV format (the format iMovie uses) it was something like a gig in size. Lastly, the audio, the thing I was after, was completely mangled. So, I downloaded Divx Doctor 2, converted the AVI, and then was able to use Peak (a great audio editing program by BIAS) and was able to extract all the audio and save it as AIFF. I could have actually saved it to any one of several formats, at 16 or 24 bits, for those who aren't familiar with the program. By the way, you can convert more than AVIs with Divx Doctor 2.
Thanks so much for the link! Hopefully this info will help someone else looking for to get samples from movies.

Major Problem with audio from Final Cut to DVd Studio Pro

I am posting this problem again because no further responses have been received regarding my first post. I purchased an MR-HD100 Firestore device from Focus Enhancements. When I use clips from it alone or with other clips created by digitizing from min DV tape on a sequence or timeline the audio works fine in Final Cut. When I import any type of file and believe me I have been trying all kinds of suggestions and wasting almost a dozen DVDs. Whether it be a Final Cut QT file, going straight to compressor and producing an MPEG-2 file and a dolby audio file .ac3 importing them into DVD SP and making the adjustments that MR. Harbsmeier suggested DIAL NORM at -31dbfs and COMPRESSION MODE to NONE, as well as the suggestion to make an aif file with the audio and importing it into DVD SP as well as the video. I get the same result with every try, the clips made with the firestore are so low you cannot hear them. NOTHING WORKS!!!!. And yes I have tried making a DVD with just digitized footage and yes it turned out fine. I called Apple support today and that gentlemen basically told me I am out of warranty so phone help was not available. However, he made a suggestion of changing sequence presets in Final Cut which has now developed into another problem. I have messed up my settings so bad I don't know where I am I can't LOG & CAPTURE in the manner I used to ???? Could someone please advise as to why this problem exists and the correction to resolve it. I do not understand why the audio works fine playing the sequence on the timeline in Final Cut. It plays fine after making a Final Cut QT file. AND it plays fine in simulation mode in DVD Studio Pro. However after you burn a DVD the audio from the firestore clips are not to be heard unless you crank up the speakers or TV to it's maximum level and you can barely make it out. PLEASE PLEASE PLEASE HELP ME Projects are stacking up and was really hoping to go tapeless

Try building the project to your desktop and then open the Video_TS in the Mac DVD player application.
How does it play/sound? This application is the best way to see and hear how your burned DVD should play vs. just using simulator and burning.
Just to clarify- are you taking your FC QT file into Compressor and creating a MPG-2 and AC3 file or are you bringing your FC QT directly into DSP?
What codec are you exporting from FC? ProRes422, DV, H264?
Open the FC QT in QT and apple+I to see this.
What does it say for audio?

Use QuickTime Pro to extract audio from VCD

Can I use QuickTime Pro to extract the audio from a VCD? after that, I would like to convert that audio file to an mp3.

MPEG Streamclip is exactly what I needed. Thank you!
For others with the same need, here's my workflow for Extracting Audio from a VCD:
* Pop the vcd into a computer and open it up.
* Navigate to the MPEGAV folder. You should see something like AVSEQ01.DAT.
* rename that to AVSEQ01.mpg
* Drag this new .mpg file into MPEG Streamclip
* File/Export Audio . . .
* Open up Audacity (optional)
* File/Open . . .
* direct it to the newly created .mp3
* Trim off any extra audio (I didn't want the opening credits, etc. on the .mp3)
* File/Export as .mp3

Problem: Audio from the video plays, but video does not show.

Hi,
I used the following code to play the video. The audio from the video plays displaying the player but there is no visual.
There is no problem with the video as I have tried several other videos with .mpg and .mov extensions.
import javax.swing.*;
import java.awt.*;
import javax.media.*;
import java.awt.event.*;
import java.net.*;
public class MediaPanel {
    JFrame frame = new JFrame("Movie Player");
    static Player player = null;
    public MediaPanel(){
        try{ // method using URL
            URL url=new URL("file",null,"c:\\temp\\A.mpg");
            player = Manager.createRealizedPlayer(url);
        } catch( Exception e) {
            System.out.println(" Unable to create the audioPlayer :" + e );
        Component control = player.getControlPanelComponent();
        frame.getContentPane().add( control, BorderLayout.CENTER);
        frame.addWindowListener( new WindowAdapter() {
            public void windowClosing(WindowEvent we) {
                MediaPanel.stop();
                System.exit(0);
        frame.pack();
        frame.setSize( new Dimension(600,600) );
        frame.setVisible(true);
        player.start();
    public static void stop(){
        player.stop();
        player.close();
    public static void main( String args[]){
        MediaPanel panel = new MediaPanel();
}

use this code "Component control = player.getVisualComponent(); "
instead of this code " Component control = player.getControlPanelComponent();"
But if you want show both of them, modify as following
Component control1 = player.getControlPanelComponent();
Component control2 = player.getVisualComponent();
then add the two control (control1 & control2 ) to your JFrame panel

No audio from mpg1 muxed videos

After upgrading to 7.1.6, all of a sudden I can't hear the mpg 1 muxed audio from within Quicktime Pro. I know I can't edit, etc. until I have converted, but I just plain can't hear the audio when played in Quicktime. I played the same video on another computer with the upgrade and it works fine. Any ideas?
Thanks.

Thanks for the reply. My Audio Midi Setup Output is grayed out with a message that Output is not supported. Since I use Soundtrack pro and Peak for my audio editing, etc. I uninstalled Garage Band.
Also, every previous mpg1 that I know played with audio, does not now play the audio, only video. It's not only one. I gave one of the files to a colleague and it plays just fine on his exact same laptop. Other than he doesn't use Quicktime Pro. ????
All of a sudden something is keeping Quicktime from playing the audio on all muxed mpg1 files.
Thanks again for ANY help.

How Do I Transmit Audio from My 2008 MacBook Pro to My 2011 Samsung HDTV?

Hello,
I'm trying to transmit audio from my 2008 late model MacBook Pro to my 2011 Samsung HDTV. My MacBook's Model Identifier is MacBook Pro 4,1 (ancient, I know). I purchased this DVI to HDMI cable which does a beautiful job of transmitting the video to my HDTV, but no audio (as advertised): http://www.amazon.com/gp/product/B000E8SY5Q/ref=oh_o02_s01_i00_details HELP!!
Thanks very much.

I figured it out! I plugged in my 3.5MM auxillary cable I use to plug my iPhone into car stereo jacks from the headphones port on my MPB to the "PC/DVI Audio In" on the back of my Samsung HDTV and voila! It worked! No additional cables (other than these two). No upgrading OS. Yay!
Here's the auxillary cable: http://www.amazon.com/AUDIO-3-5MM-JACK-AUXILIARY-CABLE/dp/B002Q3K0QS/ref=sr_1_1? ie=UTF8&qid=1330576344&sr=8-1
This looks like a great workaround to the MPB to HDTV audio problem! Hopefully my geek status is still intact. W00T!
When in doubt, try all the cables you have in all the different ports. AV hasn't changed much over the years and you can often rig things to work with what you already have. Yay for keeping cables out of landfills and repurposing!

When I upload audio from itunes into my imovie project, it does not show all of the track?

Hi, I have opened a new project in imovie - I have uploaded 200 photos into the project to make a Comic Book movie!
this project is 7 mins and 8 seconds long - the exact length of the audio track that I want to play during the movie!
I have selected the music by clicking the musical note button in imovie, which open up my itunes library and displays the track I want to use that is 7 mins and 8 seconds long.
When I click and drag my MP3 audio from itunes into my imovie project, i only plays the first 5 mins & 33 seconds; leaving my project in silence for the final 1 min & 3 seconds????
I have not added markers, there are no fade ins or fade outs - only the first 5 min & 33 seconds or a 7 min & 8 seconds MP3 Audio track???
I have spent 10 hours trying to rectify this problem.......
can anyone help me with this problem
Peace, Love & Happiness
Jayondrums

Sounds like your talking about iMovie for Mac?
This is the iOS version, repost here:
iMovie

Delete unused audio from GB sessions from hard disk

I would like to clear the unused audio from many Garage Band sessions from my hard disk. When audio is recorded in GB where is it stored?
Thanks
Mac OS X 10.4.11 MacBook 2 Ghz Intel Core duo
Garage Band 3.0.4 (104.7)

Normally, GB does a pretty good housekeeping job with the audio files: If you are not using a recording at all in you project, it gets deleted next time you save your project. (That means: not using even a fraction of a second - otherwise the whole audio is kept, since GB's edits are non-destructive.)
Having said that - if you want to check, the audio recordings are in a folder inside the project package: ctrl-click the project in the Finder, select "show package content", and look inside the media folder. Be careful - deleting stuff from that folder that you think the project isn't using might confuse GB.

I have HDMI connection to the receiver and on to the TV - but no audio from my new Apple TV. I have checked all connections and the video is xlnt. Have also toggled thru every possible Dolby/Audio combination in settings. Help! Any suggestions?

I have an HDMI connection to the receiver and on to the TV - but there is non audio from my Apple TV. Not for movies, music, YouTube etc.   I have checked all of the connections and the video is xlnt. Have also toggled thru all possible Dolby/Audio combinations in settings. Help! Any suggestions?

Hello again Parker -
The basic setup is Digital Cable Box, DVD Player, Denon Receiver/Amp and TV Monitor. To that I added the Apple TV. The Receiver only has two HDMI IN slots (one for cable and one for the DVD) and one out to the Monitor.
[I bought a switcher to toggle the DVD and the AppleTV back and forth but just disconnected the DVD to simplify when I ran in to trouble.]
So now I have:
     HDMI from the Cable Box to the Receiver
     HDMI from the Apple TV to the Receiver (in the old DVD slot which always worked well)
     HDMI from the Receiver to the Monitor
     RCA's from the Receiver to the Subwoofer and the other speakers
In addition I have some backup connections:
     S-Video, Optical Audio and L/R RCA's from the Cable Box to the Receiver
     S-Video from the Receiver to the Monitor
Wait - JUST FOUND IT!
By going thru the excercise to track all of the connections per your suggestion, I found an anomaly when I switched Receiver sockets for the HDMI links. The video moved but the audio didn't. Turns out the monitor was using the optical audio feed from the receiver. So I disconnected the optical audio and the monitor automatically switched to the HDMI audio feed!   Looked promising...
So I first connected an optical audio feed from the ATV to the receiver - Audio! Then I pulled it, but the audio didn't switch to the HDMI feed. It stopped. Would be OK if all I was going to use is the ATV, but I need the DVD player too and I can't use a switcher to toggle between them if I have to unplug the optical audio each time.
This is becoming a career! Any suggestions?
Will

No audio from ipad2 to TV when using HDMI

No audio from ipad2 to TV when using HDMI

Hi
I'm having exactly the same problem.
I have 2009 macpro
I worked out I can get visual from HDMI 3 and no picture.
Sound comes though PC1
Did you fix the problems?

How can i stream video and audio from macbook air to my tv?

how can i stream video and audio from macbook air to my tv?

Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
Mini DisplayPort to HDMI® Adapter w/ Audio Support
If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires.

Video/Audio from new macbook to HD TV?

So, I'm wondering how i can connect the new MacBook to my HD TV which supports HDMI. Can i connect a mini DisplayPort/HDMI adapter and get both video and audio into my TV?
I haven't seen any adapters of that kind in Apple Store.
Is there perhaps another way to archive this?

Barring some other adapter being released, either by Apple or a third party, you'd get the Mini Display Port to DVI adapter and then use a DVI to HDMI adapter/cable. You'll also need to connect the audio to the TV separately, so check to make sure your TV will allow audio from a different input when using the HDMI input for video; not all do.

Recording audio from a DVD

Does anyone know of a good freeware or shareware program for recording audio from a DVD into any format?
iBook G4 Mac OS X (10.4.3) 80G HD/1.33GB RAM/ Too Much Music

A nice tool for ripping and demuxing the audio part off a DVD is OSex.
You will get ac3 track - convert them with mAC3dec. http://sourceforge.net/projects/mac3dec

Recording Audio from DVD Video

Hi,
I have a music concert video on DVD. I would like to record a song off the video so that I can learn to play the guitar part. Is there any software out there that will separate the audio from the video, or in other words, capture the audio and maybe convert it to mp3 format so that I can play it in iTunes without playing the video?
Sincerely,
Jim

Audio Hijack will let you capture audio from any running Mac Os X application.
http://www.rogueamoeba.com/audiohijack/
--HangTime [WIll Compute for Food] B-|>

No audio from my mpgs.

Similar Messages

Maybe you are looking for