No audio from one of the speaker

hi guys,
i have a hp pavilion dm 4 beats edition laptop, there are two speakers at the bottom out of which there is audio output only in the left speaker and i cannot hear anything from right one. i did the sound test which doesnt show any problem, the drivers are upto date. am not able to figure out the problem, please help.

Hi,
Try the following.
Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.

Similar Messages

I created in iMovie, and extracted audio from one of the clips to use in the title sequence. All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

I created in iMovie, and extracted audio from one of the clips to use in the title sequence. All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

I am on a MacBook Pro with OS 10.6.7 running iMovie '11 and iDVD 7.1.1. Thanks for any input.

I want to use the audio from one of my clips and the video of another can I do this?

I have two different video clips that I took from my still camera. I want to use the audio from one of the clips and the video from the other at the same time in imovie can I do this and if yes how

Yes.
First go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
Now, drag the clip with the Video into the project.
Drag the clip with the Audio and drop it on the first clip at the frame where you want it to begin. A popup menu should appear. Choose Audio Only. You may then want to open Inspector for the video clip (by clicking the little gear icon at the top left of the clip) and going to the audio tab. Here you can turn down the volume of the video clip, so that all you hear is the audio clip.
Another way. Put the video clip that has the Audio you want in first. Then drag the clip with the video you want and drop it on the clip that has the audio you want. A popup menu will appear. Choose CUTAWAY.

When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

I would think you would drop down the audio level lines in the "Stereo" tab (FCP 6.0.6 view to me) in the clip's video window.
But then again, in my old version, I can't play two clips at once. But I figure if the newer FCP allow you to do that, then that's what I would do.

When I have two audio clips next to eachother, how do i 'dissolve' them so its a smooth transition from one to the next?

I have a few clips besides eachother.. levels are up and down, but i want to do an 'audio dissolve' per se, or fade from one audio clip into the other.. to make it smooth.. how do i do this? thanks

One might think that you could simply drop a transition effect on to two connected audio clips to fade from one to the next. In fact, that's what the menu seems to imply:
But you can not. No transition effects can be attached to Connected Clips. The menu lies!
There are however several ways to do accomplish the transition.
You can overlap them and drag the fade gadgets like this:
Another way is to transform the audio clips to a secondary Storyline (command-g). This will allow you to use transitions.

How can i leave audio from one clip playing, while showing another one in i

i am editing a movie, using iMovie 08, and want to use sound for a clip in the video for the end credits. how can i do this?
just to be clear, i am not trying to add audio. i am trying to leave the audio from ONE CLIP playing, while viewing a new frame. thanks.

This is simple in iMovie 11 (drag and drop), but in iMovie 08, you can still do it.
[See this blog post for details|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.htm l]

In-ear headphones playing audio from one side only

My apple in-ear headphones only play audio from one side. I've tried replacing the cap and mesh; and also tested the headphones on different devices and still get the same problem. Any advice?

Probably time to have them replaced.
B-rock

Suggestions for blending audio from one clip to next?

I'm learning editing and PP and am practicing by editing different clips from a movie to make my own trailer. The problem I'm having is that going from one clip to another has obvious and abrupt changes. I could add audio transitions to each clip, though for a 2.5 minute trailer I'm not sure if fading audio up and down constantly is the best choice? What is the best way to blend the audio from one clip to the next?
Thanks.

You can create a crossfade (essentially an
audio dissolve) from one audio clip to another.
With the audio track(s) targeted, park the Playhead at the
audio cut and hit Ctrl+Shift+D (or drag from the effect panel):
You need to be sure you have sufficient 'handles'
on both clips to accommodate the crossfade.
Creating an audio crossfade
http://tv.adobe.com/watch/learn-premiere-pro-cs6/creating-an-audio-crossfade/

What is the best way to limit the audio from going over the -11 volume?

What is command or the tools in the menu list that gives you the option to limit the volume in the audio tracks so they don't go past the -11?
In Sound Track Pro you can "normalize" the volume but this also affects the volume levels of the softer passages too. We only need to stop the audio from going past the -11 decibel.
Thank you,
<Edited by: Host>

Apply the Compressor/Limiter filter. Once you have it set up for one audio clip, you can use the Paste Attributes command to apply it to others.
BTW, don't post your email and phone number in your messages. The forums are accessible to anyone and searchable via Google. It also leaves you at the mercy of spammers. I have asked a moderator to remove them.

Audio from one event posting to another video?

I'd like to use audio from one event and use it for the audio of another movie. I've done it before, but simply can't find the info or remember just how I did it last time. Does anyone know how to do this?

ooooh, I figured it out! Sorry for the posting.

HT3819 how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?

how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?

Oops, I forgot a step between 7 and 8 ... before syncing the iPhone I need to explicitly send the document back to iTunes on the iPhone, or the changes won't come over at all ...
and then one more thing ... Numbers on iOS does NOT recognize a number of key features of the OSX app, such as conditional formatting ... so after editing my document on iOS and syncing it back to OSX on my Mac, all of those settings are lost (no more conditional formatting, have to do it all over again)
What am I doing wrong ?

Report not displaying data from one of the infoproviders

Hi Experts,
Issue: Report not displaying data from one of the infoproviders
I have a report 'ReportA' which has multiprovider MP1 as the source.
MP1 has two Infocubes IC1, IC2 in its design.
Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
Please reply.
Regards,
Suraj S Nair

Hi All,
When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
I checked the Characteristics, all of them are assigned corectly.
Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
Regards,
Suraj S Nair

This is my first mac i have 2 hard drives installed how do i move photos or documents from one to the other

i just bought my first imac i have 2 seperate drives on it. how do i move photos and documents from one to the other.

This is our resident iPhoto guru, Terence Devlin's, advice:
You can move your iPhoto Library to an external or secondary internal disk:
1. Quit iPhoto
2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.

Short dump error when extracting from one of the datasource in R/3 to BW

When extracting from one of the datasource I am getting the short dump. below is the source code of the same.
Source code extract
Get boundaries of next TID block
L_FROM_INDEX = L_TO_INDEX + 1.
IF L_FROM_INDEX GT NFILL. EXIT. ENDIF.
L_TO_INDEX   = L_TO_INDEX + L_BLOCK_SIZE.
IF L_TO_INDEX GT NFILL.
L_TO_INDEX = NFILL.
L_BLOCK_SIZE = L_TO_INDEX - L_FROM_INDEX + 1.
ENDIF.
Create hashed index on TID of TID table
CLEAR L_TH_TID_IDX.
LOOP AT TIDTAB FROM L_FROM_INDEX TO L_TO_INDEX.
L_S_TID_IDX-TIDIX = SY-TABIX.
L_S_TID_IDX-TID   = TIDTAB-TID.
COLLECT L_S_TID_IDX INTO L_TH_TID_IDX.
ENDLOOP.
Select TID block from STATE table
SELECT * INTO TABLE L_T_STATE
       FROM ARFCSSTATE FOR ALL ENTRIES IN L_TH_TID_IDX
       WHERE ARFCIPID   EQ L_TH_TID_IDX-TID-ARFCIPID
         AND ARFCPID    EQ L_TH_TID_IDX-TID-ARFCPID
         AND ARFCTIME   EQ L_TH_TID_IDX-TID-ARFCTIME
         AND ARFCTIDCNT EQ L_TH_TID_IDX-TID-ARFCTIDCNT
       ORDER BY PRIMARY KEY.
Consistence check
DESCRIBE TABLE L_T_STATE LINES L_LINES.
IF L_LINES NE L_BLOCK_SIZE OR
   L_LINES EQ 0.
MESSAGE X097(SY).
ENDIF.
PERFORM DELETE_BATCH_JOB
        USING    L_T_STATE
        CHANGING L_S_TID1.
Update LUW-Status und Zeit
CLEAR L_T_STATE_IDX.
CLEAR L_TH_TID2_IDX.
CLEAR L_T_TID.
LOOP AT L_T_STATE INTO L_S_STATE.
L_S_STATE_IDX-TABIX = SY-TABIX.

Hi Pavan,
                 This is a table space error.
Regards,
rahul

I have an ipad version 5.1.1. i have multiple albums in the ipad and i want to transfer some photos to my computer but when i open the ipad files via "computer" i can only see picture from one of the albums.what should i do?

i have an ipad version 5.1.1. i have multiple albums in the ipad and i want to transfer some photos to my computer but when i open the ipad files via "computer" i can only see pictures from one of the albums.what should i do?

You can only import photos from the camera roll into the computer. Is that the album that you are seeing?
Any albums that you create on the device itself (the iPad that is) cannot be transferred to your computer. iPad created albums do not contain copies of your photos but merely pointers to those photos so they do not actually exist in those albums.

No audio from one of the speaker

Similar Messages

Maybe you are looking for