No audio hear by 3rd party using carrier after upgrade ios5.1.1

after i used iCloud upgrade the iOS5.1.1 and I found my iPhone4 got issues on carrier whereby 3rd party unable to hear me at all although I have done all the below before I restore my backup data.
Reset all data and all setting
manually restore iOS5.1.1
reset all network setting
I also tried to change my sim card from telco company and even we tested to place my sim card on other iPhone4 and proven it is working. Vice versa, we tested to use my friend's sim card on my iPhone and same issues occurred whereby 3rd party can't hear my voice but I can clearly hear them.
Lastly, I've tested the app of skype and viber to make video call or call, it is working fine but it is not working when I use the carrier call (GSM) to 3rd party.
I suspect it is iOS5.1.1 issues rather than hardware issues because tested the mice of my iPhone is working perfectly by using the talking toy app.
Pls. advise who can help me?

uncheck the "Wait for Far End" option. Also, check and see what codec is coming across on the local AND Remote phone (if possible...I know the remote is a station on the key system, so I don't exactly know how to check that unit...) and see if it is actually coming across as a G711 and NOT a G729, which needs a transcoder, as you know...
I ran into this problem and did some manipulation with IOS transcoders through the call legs to get it to process correctly.

Similar Messages

3rd party filter missing after upgrade to Photoshop CC 2014

Upgraded my Photoshop CC to 2014.... all my presets seems to have imported fine, but none of my 3rd party filters, like Nik and Topaz are showing up in the filter menu.
What happened to them??

You'll need to reinstall them into Photoshop CC (2014). It's a completely separate application on your system, in a different set of folders.
-Noel

Does iDVD work with Maverick? This is the first time I tried to burn a DVD using iDVD after upgrading to Maverick. It seems to get stuck at encoding menu stage and not doing anything.

I tried to burn a DVD using iDVD after upgrading to Maverick, first time I tried after upgrading to Maverick a few weeks ago. It seems to get stuck at encoding menu stage and not doing anything. Does anyone else have the same problem?

I did not have a DVD handy to burn but I have just created a small 2 minute video and created a Disk Image and also a VIDEO_TS folder, the encoding worked correctly, so it works with some items.
You may get a better responce in the iDVD forum.
https://discussions.apple.com/community/ilife/idvd
regards

RAM using higher after upgrade OS X 10.9

RAM using higher after upgrade the OS X 10.9 in MacBook Pro 13 (2011).
Still its using atleast 4GB RAM normally after the startup...! then 2 -3 apps in use the it take more RAM 5.30Gb out of 8GB...!!
But Still Mac working Faster..
Thanks

Now I'm testing... These all apps as same time... RAM using 7.98 Gb out of 8GB
But Mac Still FASTER>>>!!
Mail
Safari with 5 tabs
Firefox with 5tabs
Chrome with 5tabs
iTunes
iBooks
Maps
Calender
PhotoBooth
Preview
iMovie
iPhoto
Activity Monitor
uTorrent
Skype
Adobe Audition
Final Cut Pro
Awesome..!!

No carrier after upgrade

my iphone 3gs, factory unlocked, bought in Saudia Arabia has no carrier after upgrading from 4.2.1 to 4.3.2
The baseband is 5.16.02.
Help, Please!

Try restoring your phone from backup again. If there was a problem with the update being properly installed, this should hopefully fix things.

3rd party dropshipment carried out by more than one 3rd party vendor

Hi
I am wondering if the following is possible in standard SAP on a third party drop shipment scenario..
I would like 1200pcs quantity to split up into 3 different shipments (each shipment = 400pcs) and drop ship by three different 3rd party vendors (ie. Vendor A, B, C).
Is this possible in standard SAP?
In another word, if the standard SAP is able to carried out this business in the system, will the three PO being able to be tracked by the SO?
If it is possible, how do I perform this in the SAP system via ME57?
Thanks
YY

Hi Yong Yeow Ching
Yes, it is possible but you need to have 3 PIR's with each vendor and also need to have 3 lines in Source list but w/o any tick for fixed vendor. Here are the steps:
Create TAS Sales order 1200 Qty--> It will create a Preq with 1200 Qty and delivery address of customer>When Buyer will convert that PReq to PO using ME57 system will give you a pop up message showing all the three vendors , buyer needs to select one supplier and change the qty accordngly in PO-> same steps needs to repeated 3 times using same Preq.
Regards
Yogesh

Can't use system ringtone in 3rd party apps since OS upgrade

Yesterday I upgraded the OS on my BB9900 to 7.1 Bundle 2061 (v7.1.0.714 Platform 5.1.0.532). I then had to completely reconfigure BeBuzz LED customiser (v 5.0.40 for OS 7.1) for specific contacts and apps. Before upgrading I had used 3Bells as a contact-specific alert for emails and text messages in BeBuzz. But since the upgrade it won’t let me us 3Bells. If I try, the following message appears:
“The selected ringtone 3Bells is a system protected file and cannot be accessed by 3rd party apps. Please move a copy of the file to a different folder on your phone. This applies to all ringtones that came preinstalled on this phone”.
This is very strange, as this restriction wasn’t there before upgrading the OS. My question is, how do I locate the folder where this ringtone file is?
Q10 | Vodafone UK | London

+"remove the "com.apple.systempreferences.plist" file...then re-open the system preferences..."+
And remember to either log out and back in to the account or restart the computer to force the generation of a new prefs file.

Possible fix for 3rd party apps crashing after 3.0

If some or most of your 3rd party apps crash when launching them after upgrading to 3.0, I have a fix that cured my problem. Another symptom is that you can delete the App, then reinstall and it works until syncing with iTunes.
Well my cure was to download any app, even a free one via iTunes, then sync with the iPhone. All was cured. I usually just download Apps straight from the iPhone, but the iTunes route worked.

If some or most of your 3rd party apps crash when launching them after upgrading to 3.0, I have a fix that cured my problem. Another symptom is that you can delete the App, then reinstall and it works until syncing with iTunes.
Well my cure was to download any app, even a free one via iTunes, then sync with the iPhone. All was cured. I usually just download Apps straight from the iPhone, but the iTunes route worked.

Lost my 3rd party plug-ins with upgrade to CS4

The 3rd party (Boris) files are still in the program files, but they are no longer in my effects panel. How can I get them back? Do I have to reload original software and complete all the updates again? Thanks

Good Morning Jim,
For future reference, I am attaching the response from Boris tech
support that solved the problem. Thanks again for your help.
There are two things you can do - you can reinstall the RED plugs,
this time
into the CS4 directory, or you can move the plugs from the CS3
directory to
the corresponding CS4 directory. The second would be quicker, but
requires
CS3 to still be installed. If it is, you just need to move the files
called
"FL7-BorisRed4P3.prm", "FX6-BorisRed4P3.prm" and "IM-BorisRed4.prm"
from
this location -
C:\Program Files\Adobe\Common\Plug-ins\CS3\MediaCore
To this location -
C:\Program Files\Adobe\Common\Plug-ins\CS4\MediaCore
If you do not find the RED plugs in the CS3 MediaCore folder, try
looking
here instead -
C:\Program Files\Adobe\Adobe Premiere Pro CS3\Plug-ins\en_US
David J. Whiteford
A/V Production Specialist
Justice Department/Federal Bureau of Prisons
Management & Specialty Training Center
791 Chambers Rd.
Aurora, CO. 80011
303-340-7857
>>> Jim Simon <[email protected]> 10/15/2009 1:11 PM >>>
You're welcome.

All 3rd party plugins gone after update !!! HELP APPLE !!!!!!

All my 3rd party plugins are gone after the new update from apple !! I am running lep and logic studio G5 dual 2.5 ppc 8 gigs of ram !!!! What happen ???? Can not get the AU manger to launch !!!!! Help dead in the water !!!!!!!

Relax guy!
Try trashing to audiounits cache, and the Logic caches:
user/library/caches/com.apple.audiounits.cache
and
user*/library/caches/Logic/
Reboot, and try again...

I can't use firefox after upgrading to 4.0. I get the message I have to restart my computer for upgrading, but ik doesn't start. I get the message over and over

I can't open firefox after upgrading to 4.0
I get the message over and over again that i have to restart my computer for upgrading to firefox.
I tried new installation. But i got problems on all my accounts

Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
Starting The Computer In Safe Mode;
If running, turn your computer off.
Remove any disks and thumb drives that are in your hard drives or ports.
Now start your computer but also;
'''Windows; '''Press the <F8> key repeatedly.
'''Mac: '''Hold down the Shift key.
'''Linux; '''Using the command line, Linux/Unix computers can be booted
into various run levels that determine which resources are loaded.
For example, "runlevel 1" is typically the equivalent to Windows and
Mac safe modes.
* Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
When the '''Boot''' menu is displayed, release the key you were pressing.
You must now choose what mode to use. The most used are;
* Safe Mode; The computer runs with only a minimum set of programs.
* Safe Mode '''With '''Networking; Same as above, but with internet access.

Can no longer use pages after upgrade, even after three restorations! Huge inconvenience!!

Can anyone help me with why I can no longer use pages after the latest upgrade to iOS 7.04. I have restored my ipad three times and it still won't work. It s ahuge inconvenience when all my documents are on pages. If you can get back to me as soon as possible that would be great!!

Turn off iCloud for Pages on your mobile device at Settings > Pages > Use iCloud > Off.
Open Pages on your computer and move any documents in iCloud to your desktop for safe keeping.
Navigate to system preferences > iCloud > Manage and check that Pages documents are not taking any space in the cloud, delete them if they are.
Enable iCloud syncing for Pages on your mobile device and launch the App.
If Pages now opens properly, start to add back documents from your desktop one at a time (or in small groups if you have many).

Couldn't use Remote after upgrading OS

Hi,
I've just bought Apple TV Gen3, after connecting everything, I used my iPhone/iPad to control Apple TV throught "Remote app" from Apple Store, it's no problem (default version is OS5).
But I knew that OS is old version so I upgraded that become OS6.0.2 and use, after upgrading, it has trouble:
1. The airplay is too slow, I stream my video from iPhone/iPad but it run too slowly even my phone and Apple TV just 2m.
2. If I choose Viet Nam language, I couldn't use "Remote app". My iPhone/iPad couldn't find out the Apple TV (but previous version ok).
So I would like to know what is problem and how to solve that.
Thanks.

Try using the -v option to see if additional debugging information helps
sftp -v remote.system.addr
sftp -v -v remote.system.addr
sftp -v -v -v remote.system.addr

Opera crashed when using gmail after upgraded

After upgraded 3 days ago,I got the problem of opera crashed when I am using www.gmail.com.
Don't know what's wrong.Does anyone have the same problem?

I am one of the men who moved form firefox to opera,because opera launch faster than firefox,so I will wait another version that fix the crash problem.
Someone said the opera8.52 is faster than opera9,is that true?
I don't like the bt in the opera,I have my bt client better than him.

Invalid server: while using wlan after upgraded to...

After upgraded to the new firmware (520007). While connect using wlan my phone shows that Invalid server and some times not replying. I goggled my problem and found that most are facing the same problem; is there any solution for it? Advance thaks.

Try deleting your wlan settings and key in a new setting after rebooting the phone. It may help...
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

No audio hear by 3rd party using carrier after upgrade ios5.1.1

Similar Messages

Maybe you are looking for