No audio hiccups in wine patch help

I'm trying to implement this patch: http://wiki.winehq.org/Implement_SetThreadPriority by Mike Hearn which will enable wine to work without all the nasty audio glitches when using alsa. However hunk 1 fails on configure.ac as the patch hasn't been updated to any new wine version. Apart from that it seems to work fine.
Can anyone help me get this baby compiled as i want to play my games without the nasty audio glitches and don't care if i have to be root

That was a simple fix... I didn't compile it all the way but it should be fine with this rediffed patch for wine 0.9.25. I'm not sure if this will help or are you saying you haven't even tried compiling it yet?
Here is the patch.
Hope that helps you.
~jnengland77

Similar Messages

I have HDMI connection to the receiver and on to the TV - but no audio from my new Apple TV. I have checked all connections and the video is xlnt. Have also toggled thru every possible Dolby/Audio combination in settings. Help! Any suggestions?

I have an HDMI connection to the receiver and on to the TV - but there is non audio from my Apple TV. Not for movies, music, YouTube etc.   I have checked all of the connections and the video is xlnt. Have also toggled thru all possible Dolby/Audio combinations in settings. Help! Any suggestions?

Hello again Parker -
The basic setup is Digital Cable Box, DVD Player, Denon Receiver/Amp and TV Monitor. To that I added the Apple TV. The Receiver only has two HDMI IN slots (one for cable and one for the DVD) and one out to the Monitor.
[I bought a switcher to toggle the DVD and the AppleTV back and forth but just disconnected the DVD to simplify when I ran in to trouble.]
So now I have:
     HDMI from the Cable Box to the Receiver
     HDMI from the Apple TV to the Receiver (in the old DVD slot which always worked well)
     HDMI from the Receiver to the Monitor
     RCA's from the Receiver to the Subwoofer and the other speakers
In addition I have some backup connections:
     S-Video, Optical Audio and L/R RCA's from the Cable Box to the Receiver
     S-Video from the Receiver to the Monitor
Wait - JUST FOUND IT!
By going thru the excercise to track all of the connections per your suggestion, I found an anomaly when I switched Receiver sockets for the HDMI links. The video moved but the audio didn't. Turns out the monitor was using the optical audio feed from the receiver. So I disconnected the optical audio and the monitor automatically switched to the HDMI audio feed!   Looked promising...
So I first connected an optical audio feed from the ATV to the receiver - Audio! Then I pulled it, but the audio didn't switch to the HDMI feed. It stopped. Would be OK if all I was going to use is the ATV, but I need the DVD player too and I can't use a switcher to toggle between them if I have to unplug the optical audio each time.
This is becoming a career! Any suggestions?
Will

I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio. Can you please help and tell me what i need to do. Thank you

I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio. Can you please help and tell me what i need to do. Thank you

Make sure all of the videos used in the project that is having that problem are from the same event. If they are from multiple events, move them all into one event.

I am trying to use East West Quantum Leap Symphonic Orchestra with Garageband '11 and East West isn't showing up on the Audio Unit Modules List. Help?

I am trying to use East West Quantum Leap Symphonic Orchestra with Garageband '11 and East West isn't showing up on the Audio Unit Modules List. Help?

Not sure what to say. Have the free version, installed it and GB found it. Perhaps contact East West support if you have a paid version...

DVD Audio and Subtitle script Please HELP

Subtitle Audio Scripts Please Help
Posted: Sep 3, 2006 8:04 PM
I need to write a script that does the following:
1st I have the end user choose if they want subtitles on or off and then both the buttons will default for the user to chose a language choice. So I need a script that will play just audio streams and a script that will play audio with the same language subtitle. Also if the user just pushes the language button I need the script it to default to play just that language...
Here is what I have scripted already please tell me where my mistake is:
Button Command
Subtitles
On mov GPRM 0,0
Jump Special Features: English
Off mov GPRM 0,1
Jump Special Features: English
English 1. mov GPRM 0,2
2. Set System stream Au(Audio Stream 1) if (0=0)
3. Set System Stream St(Subtitle Stream 1)(ON) if (0=0)
4. Goto 11 if (GPRM 0=0)
5. Set System stream Au(Audio Stream 1) if (0=1)
6. Set System Stream St(Subtitle Stream 1)(Off) if (0=1)
7. Goto 11 if (GPRM 0=1)
8. Set System stream Au(Audio Stream 1) if (0=2)
9. Set System Stream St(Subtitle Stream 1)(Off) if (0=2)
10. Goto 11 if (GPRM 0=2)
11. Jump JOFDVD:Start
12. Exit
All my language scripts will be similar just with different audio and sub streams.
Help Please-
Ryan-

Hi There
I think your error is in the first line of your script.
You're using GPRM 0 to set your subtitle condition and when you press enter on your english button your first line says
1. mov GPRM0,2
I'm assuming you want to use this first comand to set your languange condition so you should use GPRM 1 (or more) - at this stage all you're doing is removing the subtitle condition set by your earlier script.
Good luck
Cheers
B

Hi, I'm using imovie 11, I want to delete a clip video at the end of the project, but keep the audio, everytime I delete the video, the audio is also deleted, please help!

Hi, Excuse my English, I'm using imovie 11, I want to delete a clip video at the end of the project, but keep the audio over the fade to black, everytime I delete the video, the audio is also deleted, please help!

I assume you are trying to end the clip/project with a fade to black, or something that just doesn't cut so instant.
One thing i'm thinking you can try is to Add a "Transition Clip" to the end, and try your first method. (with Detached Audio + Delete Selection. (Yellow highlight was deleted selection) Do you need something to end like this?
If you can, put screenshot up (Shift+Comm+4), if i'm not on the right idea. It seems like an easy fix, with a few ways of doing it. You can also add a blank image to end project, sub titles or Add,Cutaway fade +Opacity adjust.

Logic Pro missing audio files and instrument patches

Good morning
Last week I downloaded Logic Pro version 9.1.8 from the App store.
I have downloaded all the additional copntent listed
I am running a brand new IMAC with OSX10.8.2
The instrument choices and patches show up.....
However many of the audio files and instrument patches are missing.
Prerecorded songs can be loaded but...
When I open a logic song (recorded on my prior IMAC) and recorded within Logic Audio 9.0.0, I get consistent messages such as
EXS24 Instrument "Classical piano.exs" Audio file "BDorfer f O d#.aif not found.
This happens with most most of the patches.
Many thanks for your help

The only things missing from the App Store version compared to the Boxed set are the loops and samples that came as part of Soundtrack Pro and those are no longer available..
However, the sample you mentioned is actually part of the GarageBand Library.... Did you install GB too?
If you did so... then... three things..
First, try using FindAnyFile
http://apps.tempel.org/FindAnyFile/
(Download the version on that webpage and not the App Store version)
..and do a search for BDorfer.. (Just that and nothing else) and see if it finds your missing file.
If it doesn't find it.., install GB and try again... (You may need to rebuild Spotlight afterwards as described below)
If it does find it then..
Two.. rebuild GB's Loop index as this fixes all kinds of weird things in Logic... (and yes, i know its loops not samples but it's worth trying based on past experience fixing these kinds of issues)
http://support.apple.com/kb/HT2443?viewlocale=en_US&locale=en_US
and... if that doesn't work..
Three... Have you reindexed Spotlight?
http://osxdaily.com/2012/01/17/rebuild-spotlight-index/
Logic uses Spotlight to find everything it needs.. so that is worth a try too if everything else fails..

Guitar Rig 2 as audio track insert - preset (patch) change?

I'm either missing something painfully obvious, or it's even harder than I think...
I'm trying to set up to play live using Logic Express 7 for accompaniment and automated control of GR2.
I've set up an audio track with "GuitarRig2 MFX" as an insert. I can see every single parameter within GR2 as controllable with automation EXCEPT the preset (patch). I want to simply change patches at various points in the song. It seems impossible.
This is on a PowerBook G4 laptop. I am using an Edirol FA-66 (firewire) as the audio interface. I have the RigKontrol connected, but not implemented as an audio interface, as there can only be one at a time.
As an experiment, I set up a track with GR2 as an Instrument, and can change patches, but that instance of GR2 is different from the one used as an insert, so the patch change doesn't help.
So, in Logic Express 7, how do I get an automatic patch change to GR2 as an insert (plug-in) on an audio track?

I haven't done this myself yet, but why would you want to do that? You can freeze the track and eliminate the CPU load.
However, if it's not CPU load that concerns you, then you could simply route the output of the track containing GR2 to a new audio track (instead of the main output), solo the two tracks, and record-enable the 2nd track. Press record and go...
I think that should do the trick...hope I didn't miss anything.

Audio problem with win xp sp3 black edition

Product Name-Hp Pavilion g6-1318AX
I've recently installed the win xp sp3 black edition.All the drivers are working but there is a problem in recognizing the sound hardware...I have tried installing many IDT HD drivers but its not working...On the properties of IDT HD audio hardware it shows a s follow..
Device not working..error(code 10)
Plz help me Sir/Madam.
Thanking You.

Hi:
You probably won't be able to get the audio to work in XP on your model.
If you did not first install the Chipset driver and Microsoft Universal Audio Architecture (UAA) Bus Driver for High Definition Audio before you attempted to install any of the audio drivers you tried, then that is part of the reason nothing is working.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&...
You may have to start from scratch and install XP if you can't uninstall the audio drivers you tried.
You can also refer to this guide, read the audio info listed under the Difficult Models section, and hopefully one of those suggestions will work for you.
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-e-g-Windows-8-and-Software/General-XP-Downgr...

24-bit External - Audio glitches in Win 7 x64, Perfect sound in Vista

I have a Li've! 24-bit external usb soundblaster.
It worked flawlessly with Vista x64 on my HP laptop with AMD chipset.
I only use SPDIF optical out in my setup.
I recently installed Windows 7? x64 on the same machine.Digital passthrough (AC3 or DTS) still works flawlessly. However I now hear regular glitches in my audio on all other audio.By no means unlistenable, but annoying. Much worse when mutitaskin, ie listening to music while browsing the internet.
I have installed the latest Win 7 driver for the card.
Does anyone have any idea how to get around this? It is puzzling, as the hardware and BIOS setup was identical with Vista x64 and I had NO issues.
Any help would be hugely appreciated...thanks!

Jthe answer is: your sampling bit rate needs to be adjusted. increase it until the 'white noise' is totally gone. then your ancient sound card will rock right true. your playback is failing you at the level of replication and is complicated by latency issues too.
I am trying to get this to work with my ableton software and I can't seem to find the updated drivers. now,,,,wherethehell are all the updated drivers for this interface/soundcard?

How do I correct video/audio hiccups?

Video and Audio are hiccupping. Is this a simple settings fix or do I need a Genius to take a look? This is during streaming videos from Netflix or other sites. Is it a networking issue or internal audio/video?

Are you dragging the videos on existing composition?
Delete all compositions in project panel.
Then drag the footage into timeline, the composition will automatically take the dimensions of footage.
Alternatively, select the clip and press ctrl+alt+F. it will snap the footage to the composition dimension.
Hope it helps.

I have a 6thgen Nano, and all the recent songs I've purchased from iTunes wont play at normal volume when connected via audio cable. Can anyone help me figure out why?

This is a semi-new problem, ongoing for several months. I've purchased songs from iTunes before and they play just fine on my Nano when connected to an audio jack cable, but for some reason, anything downloaded in the last few months plays at an insanely low volume. Normally, if I hit the advance button on the Nano to skip to the next song I'll hear a split second of the song at normal volume, but that's it.
I've restored both the iPod and my iTunes (using a Dell laptop, Windows 7) multiple times but to no avail. The songs play fine in iTunes itself, but I've even noticed a decrease in volume when listening to the songs on headphones. I'm beyond frustrated with this as I can't find any support online in the Apple archives, and I can't listen to any of my new music without burning to disc. Any help would be greatly appreciated!!

I have, a couple different pairs, unfortunately, and still no change. TBH, the headphones don't bug me nearly as bad as the fact that I can't plug my iPod into a radio or speaker with an audio cable and hear my latest purchases. Drives me crazy that I can't listen to my tunes!

No Audio in Internet Explorer - Please Help!

Hi all.
OK heres the problem. I have a Quicktime 'MOV' clip (the clip contains audio). The filesize is small at 810 KB. The clip plays great in the Standalone Quicktime player. The clip also plays great when i open it in Firefox. Now if i open the same clip in 'Internet Explorer 6.0.2' I lose the 'sound' but everything else is fine.
Ive tried browsing the Microsoft forums for days & i just cant seem to get a straight answer to this. This is my last resort, so please please please help me! I mainly use Firefox, so I dont have much experience with IE, so it could just be a QT plugin issue with IE.
The clip is for a Website & if it wont play sound in IE its pointless.
Any help/info or advice will be greatly appreciated. Peace!
DG

What is your Reader version?
It seems that your toolbar is somehow split into two; one on top, and one further down. Yet the toolbar does not really look like the Adobe Reader toolbar; do you have any other PDF viewer installed?
My Adobe Reader XI toolbar on Internet Explorer looks like

G6-1322sl IDT Audio Driver for Win 8.1 X64 VEN_111D&DEV_7605

Hi, i'm searching for a driver working on my pc with win 8.1 X64 , unfortunatly, i have tested a lot of driver:
sp60042
sp63997
sp59620
sp63555
But no one works for my pc, driver is installed but still no audio.

Hi,
My suggestion: Go to Devive Manager and uninstall it then reboot the machine with internet connection. After 10 or 15 mins, check again.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

TS5150 Audio is not working, please help!

my apple television is connecting with my computer (air play) but I cannot hear the audio when trying to watch televisions from my computer.

The first audio book I downloaded works now but no matter what I try the other one wont work it just keeps going back to the menu when i try to play it.
I've tried putting it on a new playlist and even that doesn't work.
HELP!
Niki

No audio hiccups in wine patch help

Similar Messages

Maybe you are looking for