No audio if AE comp is longer than one hour

Hello,
whenever I send the AE composition to AME, I'll have a muted part. If the composition is 1 hour and 15 mins long, the first 15 mins will be muted and if it is 1 hour long it'll be totally fine. I want to make a DVD and using two compositions is not an option. So, please help me

Hello,
Still no solution for the problem.
Last evening I deleted the Realtek Network Adapter from the Device Manager, then uninstalled the driver from Add/Remove Programs. I used CCleaner to find any Registry errors (they were none). Rebooted and re-installed the drivers (the adapter was already detected in the Device Manager).
Used again CCleaner (no errors of any kind in the Registry), then re-configured IP, gateway and DNS server in the IPV4 settings. Still no luck, only with that unique cable the netbook was detected by the switch. It stayed connected for almost 4 hours without any failure (skype and browsing), before I turned off the netbook.
I start to believe it may be something physical with the adapter's RJ45 plug: the connectors seem a bit loose and moving after I plug them, only that one cable has connectors that attach firmly to the socket.
So far, I have no more ideas to try, I did all the tricks I know.
So, I'm open to suggestions, (other than "take it to service". I have to leave the country next wednesday for a week, the service has 15 working days to solution the problem, and I have no replacement for the netbook).
Any new ideas?
Regards,
Bogdan

Similar Messages

I pay for a movie , i got charge and the movie has taken longer than one hour to load.

How quick is apple to change you and the movie is not sreaming .
<Subject Edited by Host>

Your internet is likely slow or other users are accessing internet content at the same time.
You need:
2.5 Mbps for SD
6 Mbps for 720p
8 Mbps for 1080p
Any slower and AppleTV has to buffer the movie before starting in order to prevent it sopping/starting during playback.
AppleTV does not stream in the sense you think - Netflix adapts quality to match internet speed - AppleTV doesn't and has fixed size rentals with fixed quality.
AC

More Than One Hour Footage Audio Rendering Issue in Adobe Media Encoder (from AE)

Hi every one,
I'm having a render issue when I send an After Effects composition longer than 1 hour to Adobe Media Encoder for encoding H264 files. In this case, I'm trying to render an already rendered 70 min. 23,976 fps DPX sequence paired with a corresponding ".wav" audio file into the composition and the H264 file rendered by AME plays silent for the first 10 minutes and past those 10 "silent" minutes the audio comes back normally during the last 59 min and 59 sec exactly.
I've tryed every posible "solution" (changing the audio file from .wav to .aiff and .mp3) and assigning more ram to Adobe Media Encoder and it renders the same every single time.
Please Help!!!!
Oscar.

If you can't track down the audio problems some other way you have two options. Render to a production codec in AE then compress your production master in AME or tender only your subtitles (or use dynamic link) to a lossless with alpha format in AE and marry them to the original video and audio in PPro.
Actually, the first thing I would have tried when audio problems showed up would have been to render a production master using a visually lossless format like QuickTime JPEG 2000 and then compressed in the AME.

I am putting together a slide show using iphoto and I wanted to add a description on each slide/photo. How can I do that? Also on the choice of music for the silde show, if the slide show is longer than one song can you chose a different song for backgrou

I am putting together a slide show using iphoto and I wanted to add a description on each slide/photo. How can I do that? Also on the choice of music for the silde show, if the slide show is longer than one song can you chose a different song for background music?

This might help
http://www.apple.com/findouthow/photos/#slideshow
Regards
TD

Reader X failing on Save and Save As, after the form has been opened for longer than an hour.

I'm wondering if anyone else has had this happen or maybe can offer a solution. I have several Dynamic XML forms designed in LiveCycle ES2 v9 that since our ministry switched to Reader X have been failing. At first, the save button greys out (even though new information has been inputed) and the form will only save as. Then the save as function will start to fail if the form is left open.
Our users are running Reader 10.1 on Windows Vista and so far its only users that have left it open longer than two hours, or over night. These forms have been Reader extended and at first save without issue.
Unfortunately, just telling the users not to leave it open isn't an option. We just need Reader X to work.
Thanks in advance for any information you can share about this.
~Connie

Hi Kyle,
Yes there is a lot of code within the forms. Mostly adding instances, and changing the presence on subforms. These particular forms do not have data connections, or execute any code from a server. The script all runs at the client level.
I'm checking with the form content owners to see if I'm allowed to post any of them. If they give the okay then I'll put a sample up here.
~Connie

Why can't I download a video longer than one minute from my iphone 4?

Why can't I download a video longer than one minute from my iphone 4?

Since you give no information, it is hard to help.
What have you tried?
What happened?
Error message?
What did it say?
Amy info?

HT201472 Is there any way how to find out where a particular device was when it last went online if longer than 24 hours ago?

One Mac Book Air was stoilen frm me, I can still see it on Find my Iphone and can see that it has been renamed. The computer was offline for longer than 24 hours, so I am wondering if there is any way how I can find out it's last online location?

No, you cannot find out where the computer has been. Find My Mac only shows you were the computer is right now if it is online.
I strongly recommend you change all your internet passwords immediately, notify the police (do not try to recover your MBA yourself), and your insurance company so you can get reimbursed and buy a new Mac. Once you have done all this go back to Find My Mac and click the "Erase" button.

Can we record for longer than 1 hour 6 minutes?

There are lectures that go longer than 1 hour and 6 minutes, the default in my version of Garageband.
Is there a way to keep it recording for longer than that?
Thanks!
Alphawolf7

http://www.bulletsandbones.com/GB/GBFAQ.html#recordlength

How long does it take for the IOS 7.1 to finish updating? My phone has been plugged in to my computer for more than one hour and the status bar only shows about less than 1/4 completed. I have an iphone 5s btw.

My phone has been plugged in to my computer for more than one hour and the status bar only shows about less than 1/4 completed. I have an iphone 5s btw.

Depends on how strong your wifi connection is.
you can try a reset hold down the home/sleep button together until you see the apple logo and then release.

I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!

I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!

Thanks Shootist007, by blockd files I mean files that I have changed to blocked and when I tried to move then for the first time, I had to unblock again. I am trying to backup my pictures, my songs and other files like word documents and excel tables. First I put all of them as blocked, what caused the first problems on trying to move them. Then, I've unchecked the block option and if I try to move one by one, there is no problem. The issue is to move all together, because it gets stuck in the preparing to copy files step. Anyway, if I cannot do all by once, I'll do it one by one, event though that was not suposed to happen if we are talking about technology, right? Anyway, I thank you again for trying to help me!

Report is executing more than one hour

Hi All,
I have an issue with my report,its taking more than one hour for execution.
This report is called through an package,in package there are cursors which retrive data and sends to mail.The problem is with this select statement in cursor,its taking a lot of time to retrive the data.
In my cursor select statement i am using the following tables
HZ_PARTY_SITES HPS,
HZ_CUST_ACCOUNTS CUST,
HZ_CUST_ACCT_SITES_ALL HCASA,
HZ_CUST_SITE_USES_ALL HCSUA,
HZ_LOCATIONS HL,
OE_ORDER_HEADERS_ALL OOH,
OE_TRANSACTION_TYPES_TL OT,
OE_AUDIT_ATTR_DESC_V AADV
when i use OE_AUDIT_ATTR_DESC_V ,its taking a lot of time to retrive.So any one can help me out in this issue,how to add this view to other tables
Regards,
RR

RR,
Before you add any indexes to the listed tables, check with Oracle support to ensure you will be violating your Oracle Enterprise Business Suite agreement. Oracle has specific rules on modifying EMS tables. Additionally, any EBS patch or update that gets applied will likely drop any custom changes to these tables. It might be better for you to open a Service Request with Oracle Support and have them tell you how to improve the performance of your query since all of your tables are EBS tables.
Craig...
Message was edited by:
CraigB
RR, you may also want to check with your DBA(s) to see when the Statistics were last gathered on these tables.

G5 idle for more than one hour

when i leave my G5 idle for more than one hour, when i enter my password, the system locks. i have to shut off the computer and turn it on again...

Try restoring the iPod to factory settings/new iPod.
If still problem then I would make an appointment at the Genius Bar of an Apple store and hear what they have to say.
If a bad battery:
Apple will replace it for $79
A third-party place is less expensive. Here is one:
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace it yourself.
iPod Touch Repair – iFixit

My iphone 4 does not turn on anymore and its been plugged in for more than one hour

My iphone 4 will not turn on anymroe and is left on the screen where its charging with thunder bolt lightening. I tried holding the power button and home button but still no luck. its been plugged in the charger for more than one hour already.

if you tried charging and the reset sounds like it needs to be repair/replaced

Cannot burn DVD in Premier Elements 10 longer than 1 hour in Length

I cannot figure out why I have to limit my DVD projects to no more than 1 hour in PE 10. As long as I keep the timeline to 1 hour or less, the DVD burns just fine. If I try a project over 1 hour - 1 hour, 10 minutes for example - it compiles everything, starts to burn (from all appearances), suddenly says burning is complete, and I have a blank disc. If I try to burn the same file into either a 4.7 or 8.5 GB folder, the same thing happens, and the folders I want the file to burn to is blank. I have a 64 bit system, 6GB RAM, and plenty of hard drive space. I've tried setting the burn to "fit into available space" and also selecting most video( therefore lowest quality), and still, if it's over 1 hour, it will not burn. Any thought?

mfrayer1
Perhaps it would have been better if you started your own new thread on the specifics of your situation.
But lots of questions.
1. On what computer operating system are you running Premiere Elements 7 and 10?
2. When you say for version 10 "will not write to DVD or to a folder", where are you blocked...
a. burner is not recognized in burn dialog
b. transcoding errors
c. device errors
d. disc not recognized
e. goes to 99% and then nothing
f. other
In the case of burn to folder, everything above except a, c, and d
Do you have Nero or any other burn software installed on this computer? And, the old question "Is your computer optimized?" I ask this in spite of the fact that you do state that Premiere Elements 7 burn to DVD is working on the same computer. What are we looking at in terms of computer resources?
Have you reviewed the Adobe document on burn to disc troubleshooting?
ATR

Bug when encoding f4v videos longer than ~ 1 hour ?

Folks,
We're getting a strange problem with Adobe Media Encoder.
We encode a long (slightly more than 1 hour) f4v video
and Adobe Media Encoder reports that the file encoded
successfully with no errors. But when we scrub through
the video (i.e., move the play head from start to finish),
the video hangs early in the video.
The source video in original H.264 Quicktime format
works perfectly and is known to be OK. We have plenty
of disk space and memory, so that is not an issue.
We do not have this problem when encoding shorter f4v videos
(even slightly less than 1 hour). Does Adobe Media Encoder
have a bug when encoding f4v videos longer than about 1 hour?
Is there a workaround?
Thanks in advance,
Raja.

You can remove them from the iMovie timeline and replace(?) I believe iMovie plays the full quality video (there is an option on how iMovie previews the clips) but doesn't FCE play a lower resolution version? If you are not using the Highest Quality version in iMovie, what happens when the project is exported to Quicktime or iDVD? Does the video still studder?
Regards,

No audio if AE comp is longer than one hour

Similar Messages

Maybe you are looking for