No audio in Adobe Captivate 4

I am not able to record audio with the headset that i have. I am able to have the microphone appear under recording devices and the mic level goes up and down. When i Try to record the audio for slides. I get nothing. I have been all over forums and i have been unsuccessful. Any tips on how to make this work?

In addition to above suggestions, please apply the patch for Cp 4 if not applied already.
Retry recording and let me know if this works.
http://kb2.adobe.com/cps/870/cpsid_87095.html
For audio specifically, you need to update your DLL , download the New DLL from --
https://share.acrobat.com/adc/document.do?docid=a14e1bd9-dc10-4456-9cd2-44489809b78e
Note : - DLL NSAUDIO needs to registered Manually to get applied on machine. To register this DLL –
Close Captivate
Run 'command prompt (cmd)' in Admin mode
Go to the directory where Captivate-4 is installed (C>Program File>Adobe>Adobe Captivate 4” and Enter)
Run 'regsvr32 NSAudio.dll'
Thanks,
Anjaneai

Similar Messages

Audio problems when publishing to YouTube with Adobe Captivate 5.5

I was using Audacity to record audio, then importing the audio into Adobe Captivate 5.5. One I recorded earlier, before my computer was changed, but published into YouTube after it was changed published fine. But now, after doing recordings with Audacity and within Captivate itself, on different computers and everything, I am getting no sound when publishing to YouTube. It sounds fine in Captivate, but I get zilch sound in YouTube. I have tried different computers to record and listen to the video, different microphones, different audio levels, but to no avail. What am I doing wrong?

Hi there
I'm a simpleton at heart.
Have you tried ensuring that the speaker icon isn't muted?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Audio Problem in Adobe Captivate version 4

I am facing audio proble after publishing the adobe captivate project in version 4. Squeaky/ shrill over voice is coming in flash file.
Same squeaky ovice is coming when I am listening text to speech slide by slide.
May I know the best setting through which the project should published?
Also please let me know if anybody have idea about why squeaky voice is coming in flash file after publishing the project.

Hello,
Welcome to Adobe Forums.
Make sure you have CP 4.0.1 update installed.
You can download udpate from here : http://download.macromedia.com/pub/captivate/update/captivate_4_updater.zip
Thanks,
Vikram

Adobe Captivate 7 Project How to make Rollover cations, audio, and video work in HTML format?

Adobe Captivate 7 Project How to make Rollover cations, audio, and video work in HTML format?

Honestly, I don't even know why this is an option. The conversion to Flash is completely unusable.
I have exported some things to Flash, and since I program in Flash all the time I was able to manipulate to work to some degree. Most text captions are built with multiple elements and completely fall apart.
Sorry, I can't be of more help.

Adobe Captivate 6 Missing Audio Folder

I recorded audio to my Adobe Captivate 6 project, slide by slide.
I can see the audio on the bottom of the Timeline.
When I right click on the audio, it shows on the upper screen of the Library tab on the right side of my screen, but I do not see an Audio folder on the lower part of the Library screen like I usually do.
How do I see the Audio folder again?
Please advise.
Thanks,
Dave

I cleared the cache via Preferences, but no change.
I ran the batch file to refresh the Preferences folder, but no change.
This is only happening for one of my projects others open up fine and display the Audio file.
Thoughts?
D

Adobe Captivate 6 -- Adding audio to video

Hello --
How do I add audio to a video I imported into Adobe Captivate 6? The videos actually already have audio, but I would like to record over them with my voice.
Thank you!
Ryan

Thank you!
Von: RodWard [email protected]
Gesendet: Montag, 20. August 2012 18:47
An: Scharfer, Ryan
Betreff: Adobe Captivate 6 -- Adding audio to video
Re: Adobe Captivate 6 -- Adding audio to video
created by RodWard<http://forums.adobe.com/people/RodWard> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/4634171#4634171

I just loaded Audition, but when I try to edit an audio track from Captivate the "edit in adobe audi

I just loaded Audition, and already had Captivate on my computer. I'm trying to edit an audio track from Captivate, so I go to Audio>Edit>Slide. But, the window that comes up does not have the "Edit in Audition" button activated. The button is faint, thus doesn't work. How do I sync these two programs so I can edit a Captivate Audio file in Audition?

From the captivate help file:
You can use Adobe Audition to edit audio when you want to go beyond the audio editing options available in Adobe Captivate. For example, to apply filters or remove noise, you need an advanced audio editor such as Adobe Audition. You can either edit the audio files from slides or batch process by opening multiple files in Adobe Audition using the Library panel.
The changes reflect in Adobe Captivate library and the associated slides where the audio files are being used. The saved files are reimported to Adobe Captivate with the slide associations intact.
Note: This feature is available only in Adobe Captivate that is installed as a part of Adobe eLearning Suite.
I think that the last line probably answers your question....

How to convert Adobe Captivate 3 to an audio file?

Hey guys, I have a class that has presentations online using Adobe Captivate 3. I was hoping to somehow get it to an .mp3 file so I may listen to it in the car. To access the lecture, I am directed by a .htm link, so I do not have access to the file directly, but I am certain there must be some method of "ripping" the audio. Any help would be appreciated Thanks in advance!

Welcome to our community
You might consider using Applian Freecorder Toolbar.
Click here to visit the Applian site
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Error in Adobe Captivate 4: "unable to decode and import the selected wav - mp3 file"

Good day!
I have a problem. When i want to import music file from standart Gallery, i see the mistake: unable to decode and import the selected wav - mp3 file.
I can't import mp3,wav files...
In Adobe Help site i have found this: http://help.adobe.com/en_US/Captivate/4.0/Using/WS5b3ccc516d4fbf351e63e3d119e9582190-7fd8. html
But in my Adobe Captivate 4 directory i don't have file regsvr32 NSAudio.dll.
Question: where i can download this file?
Thanks!

Hi there
As I recall there were two different "fixes" for audio with Captivate 4. One involved replacing the dll and another had something to do with installation problems on Windows XP. So give the link below a try.
Click here to view
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Re: Navigation in adobe captivate not working?

    I am facing an issue with adobe captivate swf generation.......
    I have generated an swf presentation using Adobe Captivate 4.
    The generated swf looks as in the above image.
    I searched the in the internet, but couldnt find a proper solution
    The issue is that i have created a swf using adobe CP, with slides from a ppt file.
    All these slides contain audio files attached to it.....
    After publishing, it works well except when clicking on a slide in the Table of Contents
   ( slide number shown in left of above image),
    the   player cannot navigate to the selected slide.
    It was first thought of being an issue related to the buffering of the video.
    But later on came to know that, even after waiting for long, the slide doesnt get played.
    Same is the case when dragged on navigation bar(Shown in the bottom of the above image).
    The enable navigation option is set but still the problem persist....
     Pls help me if u can.....

Hi there
Perhaps thy this. Click Project > Table of Contents. Then click the Settings button in the lower left corner. Is there a check mark in the "Enable Navigation" check box?
If you see a check mark, clear it. Then dismiss the dialog. Then click the button again and click to place the check mark there. But if there is NOT a check mark, that's the issue. Navigation hasn't been enabled.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Best Practices for Team Collaboration using Adobe Captivate

With a team of 6 Instructional Designers, how can Adobe Captivate be approached where we can collaborate while producing e-learning material while maintaining a consistent look and feel of the e-learning we produce?
What are the best practices for a team of 6 IDs working and creating e-learning material in Captivate? Is there anything build-in that allows us to connect to the same libraries, templates, etc to share?
Please advise.
Thank you!
Susanne

Only some tips, never collaborated with someone else, being the solo teacher. You didn't mention which version you are using, what I write here is meant for CP7.
Be sure to prepare a theme and/or a template that will be used by everyone. A theme consists of master slides, object styles, skin editor. Master slides can have custom navigation shape buttons. In a template you can eventually also prepare different slides with placeholders, and eventually advanced actions etc. For CP6 and earlier that is the only way to reuse advanced actions, in Captivate 7 you can export shared actions that can be imported in any project for reuse.
A feature that few users know about are the external libraries. You can open the library of any project as an external library in another project. That is a good idea to store assets that you want to use in different projects: images, audio clips, video clips, eventually equations. The shared actions in a library can not (yet?) be used in another project however.
If you are on CP7 you have automatically the roundtripping with source Adobe Photoshop files and source Audition files, both from CC. That can also make collaboration lot easier if those assets are prepared in those applications. Will not expand on that, because I'm not sure you have the Creative Cloud applications.
Those are my two cents.
Lilybiri

Adobe Captivate 6 not able to add Slide Notes

Having an issue with Adobe Captivate 6 with adding Slide Notes.
I can add them via Window>Slide Notes, but we cannot add them via clicking on the Properties tab of a slide then clicking on "Add Audio..." then clicking on the bottom "Captions & Slide Notes...". It will not let us add any Slide notes at this point.
Please advise, as teammates are sure they used this second version in the past successfully.
Thank you.........

Thank you for the reply.
The notes are just notes to the developer, so they don't have to sync with the audio.
Nonetheless, what do you mean by "Make sure your audio file is selected..."?
I went into my TIMELINE and clicked on the audio which opened the "Slide Audio" screen, then clicked on "Captions & Slide Notes..." and the Slide notes/Captions tabs show, but I cannot type anything into either of these areas......
What am I doing wrong?
Thanks again

Adobe Captivate 4 and Windows 7 Enterprise 64 bits - sound doesn´t works

Hi there,
I´m trying to start a new recording, and when I click in Audio button and try to calibrate the sound or record a new audio, it doesn´t works.
Thru the sound recorder (tool that comes with Windows 7 - Acessories), it works fine, but using Adobe Captivate 7, the "Calibrate" button cannot be clicked!
Anyone?
Thanks!

Hi there
Perhaps try the link below?
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Adobe Captivate 4 errors out on recording

Hi,
I am a long time user of Captivate and have been using Captivate 4 since it came out. I am running a Dell Precision Workstation M6400 with 3GB RAM, Windows XP Pro with SP 3, Intel 2.6 gHz processor. I also have the latest patches for Windows and Captivate installed.
I am a heavy user of Captivate. In fact a day does not go by that I am not using it. I have been working on a project for a client. I was able to shoot about 45 slides, edit the text captions, and added some audio. I saved the project, closed it, and exited Captivate. When I came back from lunch, I started Captivate, opened the project, entered Edit mode, selected the last slide (45) in my project and hit the record button to capture some additional slides. I captured about 10 more slides and ended the recording process.
I got the progress window saying the slides were importing and then I get the old "Captivate has experienced an error and will now close" error.
I have recreated the preferences, uninstalled and reinstalled Captivate 4 - 3 times, applied the lastest Captivate patch 3 times, repaired the registry table, and did all the system disk utilities I have. I have a very fast and clean running laptop, but Captivate 4 still generates the same error. I can no longer record either for an existing project or a new one. The error always occurs after a recording session, regardless of the recording type. During the importing of slides, it bombs out.
All my projects are in Captivate 4, so I can't even go back to an earlier version. Anyone else having a similar problem. My projects are gonna go overdue if I can't get this fixed. Any help from anyone would be awesome. I am willing to try anything at this point. I am attaching the detailed error report that it sends to Microsoft.

Hello eLearner68,
I am very sorry to hear that you have experienced this issue with Adobe Captivate 4. In this first instance I would suggest that you review the technote I have included below.
Troubleshoot system errors and freezes (Adobe Captivate 4 on XP)
If this technote does not help address this issue then please report the crash to the Captivate team using the web address I have included below.
Adobe Captivate Feature Request/Bug Report Form
Best - Mark
Visit the macrofireball blog

Adobe Captivate 8 Crashes on Mac

Hi,
Adobe Captivate has crashed twice on me today. Unfortunately, after the second crash I lost 2 hours of work. Does anyone have any trouble shooting tips on how I can fix this? It's the most up-to-date version of Captivate.
Yes, I realize that I need to save more often. To that effect, are there any AUTO-SAVE features in Captivate? I couldn't find any in the preferences.
I guess the alternative is to set a timer on my phone to save every 10 minutes ...

Hi Simpski,
I don't recall doing anything super complex. I'm adding audio, animations and the like to my slides, but nothing I would tag as overly complex. It's weird!
Essentially, the program will just close. There's no warning, no crash report - nothing. Not sure if you use a mac, but it acts as if I performed a force quit (which, of course I didn't).
Nepotist,
Thanks for chiming in! I'll take a look at that thread and perhaps comment on it.

No audio in Adobe Captivate 4

Similar Messages

Maybe you are looking for