No audio in any streaming movie?!?!!

So I'm not sure if it happened with the Quicktime 7.0.4 update, or if it happened with the OS X 10.4.4 (combo) update, but now when I go to watch ANY streaming movie, I have video, it's really smooth, I kinda like it, but now there's no audio. Up until about a half hour ago I was also sporatically losing my interface sounds (send to trash, empty trash, etc).
I tried loading a TV show preview in iTunes through the iTMS and it worked just fine, but if it's in Quicktime Player.app, it's a no go.
I have repaired permissions, reinstalled Quicktime 7.0.4, reinstalled the 10.4.4 update, reset my PRAM, ran /sbin/fsck -fy in single-user mode, cleared ALL caches (/Library/Caches/, ~/Library/Caches/, /System/Library/Caches/, & /System/Library/Extensions.kextcache) and NOTHING works.
I guess my next step will be to try and run the uninstaller for Quicktime 7.04, and get back up to Quicktime 7.0.3.
Anyone else having this problem? I know my fiancée's iBook was just last night as well... both tried loading the Macworld SF 2006 Keynote and got video, no sound.

Ah ha! Apparently the audio output got changed to 96KHz in the Audio MIDI Setup.app.
I found my answer through this post:
http://discussions.apple.com/thread.jspa?threadID=309078
which had a link to the single post that contains the real fix:
http://discussions.apple.com/thread.jspa?threadID=310556
I'm running on a new... maybe not so new now that the MacBook exists.. but anyway, I've got one of the new 17", SuperDrive DL, higher-res PowerBooks, maybe the digital audio made this odd change possible, the installer must've just changed it.. dunno.. anyway, problem solved! I've got audio in streaming movies .

Similar Messages

No audio streaming movies with iTunes 10.2.1 and iOS 4.3

I upgrade to iTunes 10.2.1 and to iOS 4.3 and now I can´t listen audio on my movies with 6 channels audio. With two channels (stereo) there is no problem. With multichannel I just can see the video, but can´t listen. The problem is with my iPad and my Apple TV. On my iMac it works fine, I can see and listen.
Anybody Help ??

I have the similar problem with video. I can not stream movies to apple tv after ios 4.3 update that i used to stream before. The problem seems to be for some (but a lot) specific movies though. After going through all my videos i found a couple of videos that was able yo be streamed. Even with movies that can't be streamed the video loads (and even plays on fast forward but very slow without audio) but just pauses. It just loads opens and everything but just doesn't play.I don't have any problem with streaming audio from ipod or etc. I can still stream video from youtube as well but just can't do it from my itunes.
Just to be specific, i have the issue with my ipad as well. The movies that i can stream to atv can be streamed to ipad as well (from my pc windows) but for other movies neither my atv nor ipad can play. A clear **** up by the developers. Just can't understand how they can release without even checking possible flaws.

.Mov files in CC : The File Has no Audio or Video Streams

I recently updated premier to CC , since i have issues iimporting any .mov files at all.
The specific ones Im trying for my current project are exports from AE , rendered lossless animation .mov , worked fine in CS6 , will play in quicktime and other generic's but always getting the The FIle Has no Audio or Video Streams message when trying to import into a project.
Quicktime is updated so I can't understand why the won't play, is this a CC bug ?
i go back to cs6 on my other comp they open fine...
Ive seen a few topics on this none with a resolution and most of those where from cam's, this is an export from AE, anyone able to help this is stopping me from working atm ......
troy

I can verify that Apple screen recordings without audio do not import into any Adobe premeier.
Details on screen recording from Gspot v2.70a:
H.264
qt : Apple QuickTime (.MOV/QT)
File Type: QuickTime (.MOV)
Mime Type: video/quicktime
Len: 1:03.083
Frms: 1,521
Qf: 0.153
Frames/s: 20.000
wx: 1280 x 800
sar: 1.600 (8:5)
However Apple (MAC OSX) screen recordings WITH audio will import.
I would think this should be fixable with hotfixes...
If you (adobe staff) have access to macbook pros 2012 or 2013 models, open quick time pro, do a screen recording, make sure no audio is recording, just your screen movements.. then export to 1080p video (mov is only option).. then on a windows PC try to import that file into adobe premiere. The file will play perfectly fine natively in windows with any player so long as a H264 decoder is available on that system... the problem here is Adobe Premiere. Not the users system.
Edit:
To help those with this issue.. just make sure when you render your mov that you have ANY kind of audio in it.. and just remove the audio track once imported into premiere. I know it's frustrating and you would think something as simple as not having an audio track wouldn't break premiere but alas... we have to work around the shortcomings until they decide to fix it.. just like the VFR issue in premiere.

Import mov error. "The file has no audio or video stream".

Very interesting. Would this also explain why i was previously able to import some high def files I downloaded and after the reformat of my computer and reload of cs5.5, I'm now not able to use those files? It's very strange. I did a project, used the high def mov files and it came out great. After a mandatory reformat and reload, now the file doesn't want to import into premier. Error message was... "this file has no audio or video stream"... yet they play fine in media player, and one of the files works, but not the rest. Thanks in advance for any help you can provide. Mark

Mark,
Welcome to the forum.
Unfortunately, you have posted to the Premiere Elements Tips & Tricks sub-forum, which is a repository for articles on how to do things in PrElements.
Maybe our MOD, Steve Grisetti, will move this out to the Premiere Pro CS 5 & CS 5.5 forum, where you will get more replies.
After the reformat, did you install Apple's QT Player? If so, what version.
What is the CODEC in those MOV files? That can be very important, but the very later versions of QT Player should install most of the popular CODEC's, that one sees in MOV, MP4, MTS, etc. files.
Good luck,
Hunt

Why can't itunes stream movie audio over airplay?

This is more a suggestion to Apple engineers rather than a request for assistance but any comments in support (or otherwise) are welcome.
So, it goes like this, I use my iMac as my TV, entertainment centre, etc at home and I stream audio from there to an Airport Express hooked up to my stereo. Using Airplay in iTunes and third party apps like Rogue Amoeba's Airfoil this works for just about anything: my music library, live TV through EyeTV and non DRM movies...but I like to download rental movies from iTunes and for some reason I can't stream audio from iTunes movies. I understand that this is a documented limitation of iTunes and Airplay, and there can be some issues with audio and video getting out of sync due to the buffering, but if Airfoil can do it, why not iTunes? The Airfoil video player is pretty basic, but it compensates for the buffering delay without any problems, and I can even use VLC to manually add a delay into the video track.
Would it be possible to include this as part of a future iTunes update? I mean, I'd much rather rent movies legitimately through iTunes than resort to other more nefarious means to be able to enjoy watching movies on my Mac. What's more, I have this pathological antipathy toward hooking things up with cables, so Airplay is the perfect solution for me and loads of other people as well, I'm sure.
So come on Apple, show you really do care about Airplay and let iTunes stream the movie audio so that I can enjoy my entertainment in High Fidelity.
Thanks,
Joe.

Well, here's some good news!
Looks like a feature of Mountain lion that didn't make the front page solves my problem. To get movie audio over Airplay, on OSX 10.8 go to Audio and MIDI Setup app, make sure you have the Audio Setup window open (Window - Show Audio Window) and if your Airport or other Airplay device is online it should appear in the list of audio IO devices on the left hand side.
Right click on the Airplay icon and select "Use this Device For Sound Output" and away you go. iTunes (10.7 at least) seems to be smart enough to realise that it is playing audio to a streaming device and buffers the video accordingly. Viola! Glorious hifi sound sans wires.
J

HT4108 I'm trying to connect my iPad to my tv so that I can mirror whatever is on my iPad. I want to stream movies online and watch on the tv. I have the digital av adapter and an hdmi cable but it's not working. Any tips ?

I'm trying to connect my iPad to my tv so that I can mirror whatever is on my iPad. I want to stream movies online and watch on the tv. I have the digital av adapter and an hdmi cable but it's not working. Any tips ?

If this is an iPad 1, it won't mirror, but it will still output video from the 30 Pin dock connector.
If your new TV has a conventional VGA in and stereo inputs you can try this connector.
http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=3a
I used to stream video from both Netflix and YouTube and from my Mac using iTunes sharing through my iPad then with this connector plug into my iPad and TV.
It won't be high resolution, but it will get you picture from iPad to TV.
Good Luck.

Can Apple TV stream movie and other non-music audio to airtunes

I suspect the answer to this is that it is not (currently) possible.
I can stream music in itunes directly from the ATV to my hifi speakers connected via airtunes and an airport express, but I'd like to be able to stream other audio too, such as movie sound tracks. I know this can be done using airfoil from a mac, but I can't see an obvious way of doing the same with ATV. Am I missing something?
Thanks

Swaldale wrote:
One day perhaps...?
that would be speculation.
there's always _*Apple TV Feedback*_.

TS2289 I updated iMovie and now why isn't there any audio when I import movies from my Sony camera?

I updated iMovie and now why isn't there any audio when I import movies from my Sony camera?

What version of iMovie?
What camera?

Cs6 Trying to import .mov I keep getting the error "no audio or video streams"

I have 2 projects and I can not import .mov I keep getting the error msg "no audio or video streams"

I know this is an old thread, but this may still help someone having problems importing .mov files into Premiere Pro CS6 (or earlier versions) in Windows 7/8.
- Go to control panel
- Appearance and personalization
- Folder options
- View tab
- Un-check Hide extensions for known file types
- Hit OK
- Find your FILE.mov file and rename it to FILE.mpg
Try importing the newly renamed .mpg file to Premiere and it should work. PP CS6 kept crashing for me, but once I renamed the file, it imported perfectly. Hope this helps.

When watching a streamed movie, Firefox works briefly, stops, buffers, and then prevents any further action on my Mac, which I must turn off with power button.

A streamed movie will run smoothly for maybe 5 minutes. Then it will begin to buffer. The multicolored icon turns and turns and nothing happens. I try to go back to browsing but cannot. I try to close netflix but cannot. I try to close Firefox but cannot. Everything is basically frozen and the only way I can turn off my Mac is to press the power button.

Have you tried anything on this page?
* https://support.mozilla.org/en-US/kb/fix-common-audio-and-video-issues

TS3623 I rented a movie and can watch preview perfectly with video and audio feed as signal strength is at top when I checked. However, when I purchased rental video is fine , but I get scratched sound for audio. Any thoughts to fix?

I rented a movie and can watch preview perfectly with video and audio feed as signal strength is at highest when I checked. However, when I purchased rental video is fine , but I get scratched sound for audio. Any thoughts to fix? I rented movie within week and it worked. All previews of movies and show also works.

I have a suspicion that the problem is not in the recording device itelf, but rather in the playback-software, which is struggling with an unfamiliar audio format/codec/whatever-it's-called... I opened the file in QuickTime Player 7 (7.6.6) and selected "Show Movie Properties" and it says:
"Video Track: H.264
Sound Track: Integer (Little Endian)"
All current Mac systems support Integer (both Big and Little Endian) audio natively. The fact you can hear anything at all proves that the audio is playing back. The most likely problem would be a malfunction associated with the mic pickup.

Hey guys, I have an ipad2. Am a new user of apple products. Currently am having trouble streaming movies and series online...I seem to only be able t watch YouTube video from the YouTube app installed on the iPad. Please any suggestions?

Hey guys, I have an ipad2. Am a new user of apple products. Currently am having trouble streaming movies and series online...I seem to only be able t watch YouTube video from the YouTube app installed on the iPad. Please any suggestions?

Currently am having trouble streaming movies and series online...
From where? Using which apps?

My macbook air keeps shutting down unexpectedly, any thoughts? It seems to be while streaming movies etc and i think it's when the power cable is plugged in, not while on battery

It's only 3 months old, I think it's mostly while streaming movies from the net whilst the power supply is plugged in? I have seen a couple of other similar posts. Any thoughts or advice greatly appreciated.

Try a SMC reset.
http://support.apple.com/kb/HT3964

Any way to increase audio level of your movie?

I've uploaded a taped video into iMovie and when I play it back, the volume level is too low (I can hear it but it's not loud). I've increased the system pref vol, the vol level, and the volume level in iMovie so everything has been turned all the way up.
I saw where you can extract the audio. What can you do with it when you extract it? Incresase it? And if you can increase it, how would you add the audio back to the movie?
What I want to know is, is there another way to increase the volume if you've turned up all the computer volume controls and it's too low?
Mark

The best place to increase / adjust audio levels assuming the source video footage has something to work with is in the video editing app. Have you tried posting this question to the iMovie forum?
If your iMovie has low audio levels to start with then this will also be reflected w/in iDVD if no adjustments are made beforehand. Hope this makes sense.
Also check in the iMovie Help Menu if you haven't already:
I can't hear the audio in my movie
If you can't hear some or all of the audio in your movie, here are some things you can check:
Make sure your computer's volume is turned up. Use the speaker controls on your keyboard or the volume slider in the menu bar.
Use the volume slider below the iMovie monitor to increase the movie volume.
Make sure the audio checkbox is selected for the track you want to hear. The audio checkbox is to the right of each track in the timeline viewer.
If the audio checkbox is selected, then choose View > Show Clip Volume Levels and see if the audio levels for the tracks are set to a level that can be heard.
Making your movie louder or softer
If you find that all or part of your movie is too loud or too soft, you can adjust the volume of your movie in the timeline viewer. You can increase or decrease the volume of the entire movie or just specific audio clips. For example, at a certain point in a video you might dramatically increase or decrease the volume of accompanying music.
IMPORTANT: These instructions are for setting the volume of video that people will hear as they play your movie. If you only want to adjust the volume of your computer's speakers, see "Adjusting the volume of your computer in iMovie HD" below.
To make your movie louder or softer:
Click the Timeline Viewer button (shown above).
Select the clip or clips whose volume you want to change in the timeline viewer.
Tip: To learn how to select multiple clips, see "Selecting clips" below.
Click the clip volume button (shown below), and then drag the slider to adjust the volume.
Tip: You can also type a new percentage in the field next to the clip volume button to adjust volume.
You can also make finer audio adjustments within a clip. For more information, see "Fading audio up or down."
Message was edited by: SDMacuser

I am having problems streaming movies to my ipad from my mac. The movie starts and then pauses and then starts again. any ideas?

I am having challenges streaming movies from my Mac Mini to my IPAD 3, the movie will load (after what seems a bit too long) and start to play. It then stops after 30-50 seconds and if I leave will start again, but repeat the start stop thing. Its almost like it stops to buffer than starts again. I have had the same issue appear wiht my Iphone 5.
Thoughts?

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

No audio in any streaming movie?!?!!

Similar Messages

Maybe you are looking for