No audio in fcpx clip

I shot some video on an HVX200 in 1080 24p. It had the on camera mics on for reference audio. When I import the clips into FCPX there is no audio. However can see the waveform. The FCP Archive does have audio. When I import the clips I can play them back with audio in the Media Import window. HOwever when they get into my FCPX Event...no audio.
My other clips from the 6D play back just fine, and my other footage from the HVX200 work fine as well. This is the first time I've shot in 108024 so I'm wondering if it has something to do with that.

Audio is 48khz, 4 mono.
No waveforms.
No audio in the clips at all (events or when opened in timeline)
One odd bit of info. One clip has about 10 seconds of audio. I also noticed the clips appear to be playing back slowly. They say they are 23.98fps, but it seems like it is playing 30fps at 23.98 (ie slow motion). I wonder if it has to do with the capture of the clips. I used P2 cards and the clips spanned 2 cards.

Similar Messages

  • FCPX clip audio does not export, "Jingles" do.

    When exporting my project from FCPX to Quicktime, the audio from my clips does not import but the jingles I used from the FCP media library do export.
    I get "Quicktime error: -50"
    I do have the audio portions of the clips overlapping each other. Maybe this is why?
    Could it be an issue of permissions? I ran disk permissions.
    Thanks,
    Grace

    Sys prefs Sound -> Output -> Internal Speakers... Built-in //  Settings for selected device: The selected device has no output controls  //  Output volume:   (slider)
    When headphones in, Sys prefs Sound -> Output -> Headphones ... Headphone port  //  Settings for the selected device:  Balance: (slider left-right)  // Output volume:  (slider)
    Channel configs:
    Media specs: Apple HDV 1080i60, 1440 x 1080, 16-bit integer (Big Endian),  Stereo (L R), 48.000kHz
    - Tisha

  • Motion 5 title: no audio in FCPX

    Hi
    I finished a Title in Motion 5, with audio. Everything works smoothly, including audio.
    However, when I save it and open it in FCPX the audio won't play. In the FCPX Inspector there's no audio tab.
    If I export the project as a movie, then the audio comes back and plays regularly.
    Any idea why the Motion 5 Title has no audio in FCPX?
    Thanks

    I'm not sure what Apple's rationale is, but having considered the possible variations that can arise, I can see why it's done this way.
    In FCPX, there's no guarantee that the effect will be exactly as it is created in Motion. And if used as an Effect, it could be any length of clip it's applied to without consideration.  How do you synch the audio, especially if it is not aligned with the starting frame of the project. Time-scaling?  Exact frame count offset?  And Apple hasn't built in a way to get in and adjust any audio that might have been applied to the project (but it would be nice if there was something akin to an "audio dropzone"...)

  • How to unlink video and audio in FCPX

    I am new in FCPX.. can someone tell me how to unlink video and audio in FCPX ? and how to mute audio rather than low the -db ?

    There's no 'Unlink' audio (as such) in FCP X but if you select a clip in the timeline, and press Shift+Ctrl+S, the audio breaks away from the clip. Select this, and you can toggle it on and off by pressing V.
    Take care with this, because it's easy to get the audio out of sync. You need to move the audio and video together if you have to move them, so I would select them both and press Option+G to make them into a Compound Clip (to preserve sync).
    To mute the audio embedded in a clip, select the clip in the timeline and press Cmd+4 to open the Inspector.
    Click the Audio Tab at the top of the Inspector and uncheck the Audio Waveform(s). Your Audio will be muted.
    To mute audio for the entire project, go to the Roles tab in the Timeline Index (next to the film reel icon) and uncheck Audio or Dialogue (as appropriate).
    Andy

  • How can i leave audio from one clip playing, while showing another one in i

    i am editing a movie, using iMovie 08, and want to use sound for a clip in the video for the end credits. how can i do this?
    just to be clear, i am not trying to add audio. i am trying to leave the audio from ONE CLIP playing, while viewing a new frame. thanks.

    This is simple in iMovie 11 (drag and drop), but in iMovie 08, you can still do it.
    [See this blog post for details|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.htm l]

  • How do I use just the audio from a clip in imovie? No picture, no video, just audio!

    I want to put the audio from a clip at the end of the video. No video, just black screen

    It will require a bit of a workaround. But it can be done. If you enable Advanced Tools under the iMovie Preferences (Go to the iMovie Menu > Preferences). Enable Advanced Tools by clicking the checkbox.
    Now create  a title with a black background by dragging at title to the end of the video on the Project timeline. Once the title is there, delete all the text on the title. Now drag that black background directly dead center onto the video clip just before the end where you want to 'blot out' the video and just have audio. When you release the mouse, you will be shown a pop-up menu with a bunch of different options including one titled cut-away. Choose this option. What will happen is the video will cut to the black video background you dragged on top of the video clip. You can set the duration by dragging the left and right edges out further to make it run longer. This black back ground effectively cover the video and will continue to play the audio of the underlying video clip.

  • How do I use just the audio from a clip without the video?

    Can't remember how to use just the audio from a clip, without the video.  FCP X can't select like FCP&

    Edit just the audio into the timline.
    The disclosure triangle next to the edit buttons.

  • No audio in video clip in slideshow

    How do I get the audio associated with a video clip to play in iPhoto? I have several clips taken on a digital camera--with audio--and have them imported into iPhoto. When I make a slideshow incorporating one or more of them, they play fine but with none of their own audio. How do I get their audio tracks to play in the slideshow? If I double click on any of the video clips separately before making a slideshow it opens Quicktime and plays the video and audio OK.

    I am using iLife 2009 and do get audio clip associated with Video however it does seem to have some issues. Clips from one of my cameras (Sony - in avi format) work fine .. I can even choose an iTunes track or playlist and iPhoto blends the two.
    However, I can not seem to get audio associated with clips from one of my other cameras - JVC (.MOD format converted to MPEG4).
    The clips do have audio when played by itself in iPhoto however when I go to slide show mode, the audio disappears.
    Still trying to troubleshoot ... will post if I am successful.
    Bobby

  • Audio dropout one clip only

    I created a movie in iMovie 6.0.3 (project size approx. 3GB) and shared it with iDVD to burn a DVD. Very little extra added in iDVD for Theme, etc. so it should have been well within size limits of standard DVD-R. (I have successfully burned DVDs in iDVD for similar projects with the same brand of DVD-R media previously with no problems). The movie played with no audio loss in iMovie and on the iDVD preview.
    I do have music running under the clips, and the only difference on the clip with audio loss on the DVD is that I had to extract the audio from the clip in iMovie to make an edit work.
    On that clip of the movie when viewed in iMovie's timeline view I have my video visible on the top line with my extracted audio (from the video clip)on the middle line and my music on the bottom line.
    When I burned the DVD and tried to play it back on my TV the audio was fine until the last clip of the movie -- where there was no sound at all. I tried importing from the Media pane in iDVD rather than sharing from iMovie with the same bad result after burning the DVD.
    I have checked the forum, and while there are many similar issues no one seemed to have this exact problem. I did print out the linked article re: Updating iDVD to 6.0.1( I currently have version 6.0.3) and deleting encoded assets (I had plenty of space available on my hard drive) -- it didn't seem to apply to my problem, if I'm understanding those two issues.
    I will try the Disk Utility fix, but I'm trying to make a deadline and have never created a DVD that way before.
    Any ideas how to burn the DVD -- preferably with the iDVD theme and button menu if possible, but most importantly with the least loss of video and sound quality.

    Thank you for the helpful response. I was able to deliver the DVD on time with a workaround.
    Once that was done, I tried playing the DVDs I created originally on my friend's DVD player and they played perfectly!!!
    Any suggestions out there -- other than I need a new DVD player
    is there any way to confirm a DVD burned in iDVD will play on the majority of DVD players before I send it out as a finished project?

  • Detaching audio from video clips

    Hi
    After trying the standard 'detach audio' button I cant seem to find a way to completley detach audio from a clip in order to hear the track I have added to the clip. All I can seem to do is turn the volume right down, and inturn still able to hear it, which is proving annoying!
    Any ideas would be appreciated!
    Thanks

    Thanks for your reply Geoff,
    I basically have a soundtrack 3.28 minutes long which I want to be the only noise thats playing throughout my interchanging video clips, so I would like to completley move the audio from the all of the indivdual video clips that I am adding in, I thought the 'detatch audio' button would be the one for this, but as I continuously play back bits of the movie to prefect editing I can still slightly hear the sound from the individual videos that I am adding?
    So frustrating, but Im sure thats its something real basic that I am missing.....

  • Extracting audio from many clips at a time

    I have to extract some audio from many many video clips, so I was attempting to do it in one step, but Logic extract only from one clip at a time 
    So I'm thinking to use Audio Converter (it can extract audio from many clips in one step), but it ask me the AIFF encoding Bitrate (among 64 and 192 kbps). So I'm wondering... but Logic which AIFF bitrate manages???
    Tnks

    yes, it is possible. Infact, it is the normal practice to add those 10 roles to that single user in SU01 direclty.
    and as I said, user comparison should be scheduled normally in SAP system landscape to do the things automatically, however not immediately but after some time.
    http://help.sap.com/saphelp_nw04/helpdata/en/52/6714a9439b11d1896f0000e8322d00/content.htm
    If you want user comparison immediately, then you need to do it manually in the role.

  • Disturbed Audio with long clips and speed changes.

    Hello,
    I experienced a strange problem in FinalCut Pro (v 6 and 7).
    -I capture a clip with a Blackmagic Decklink or a DVS Pronto as Uncompressed Quicktime, 720p50 via HD-SDI with embedded audio. The clip is about 10 minutes long.
    -I speed down the clip at 36% by changing the clip's speed in the sequence.
    When I render the audio track, I get completely distorted audio after some minutes until the clip's end.
    The problem doesn't seem to occur when I put the clip in a sequence and nest that sequence into a second one and change the nested sequence's speed.
    Is that a known bug? Did anyone out there experience the same problem? Is there any technical explanation and solution?
    Message was edited by: weisseruebe

    Both Picture Safe and Title Safe are guidelines. They were developed to ensure that titles and pictures placed within these guides would be viewable on most televisions.
    In the same way that no two tv's will look the same with regard to colour, there can also be a great difference in overall picture placement on the screen. Keeping titles within the safe area will help ensure that even the most poorly calibrated set will still show the entire title.
    You can't convert the MP4s because you do not own the right to use them.
    As for the MP3's, time to do some work and look it up. The Search function here is a great resource.
    rh

  • Audio from video clips

    I tried combining video clips into one movie through imovie, the video was there but not the audio from the clips. What can I do to fix this?

    The conversions played sound in QT, but no sound in the editor... What can I do so I don't lose the audio?
    Open the Event file(s) with the QT Player and check the "Inspector" window to make sure the file, as imported to iMovie '08, still has its audio track in tact. If it does and the missing audio is limited to scrubbing Event files, check the audio switch under the preview window to see if it is off. If no audio is present in normal playback/preview mode, then thumbnails could be bad and you might try re-thumbnailing the events. If the problem is on the project side, try duplicating the project and see if the duplicate has sound. If you still don't have audio, try trimming the duplicate project to a very short sequence and exporting it to see if the output has audio. This assumes you have audio everywhere else and it is not a system wide problem like muting, system sample rate switched to a different setting, system volume turned down, etc...

  • Suggestions for blending audio from one clip to next?

    I'm learning editing and PP and am practicing by editing different clips from a movie to make my own trailer. The problem I'm having is that going from one clip to another has obvious and abrupt changes. I could add audio transitions to each clip, though for a 2.5 minute trailer I'm not sure if fading audio up and down constantly is the best choice? What is the best way to blend the audio from one clip to the next?
    Thanks.

    You can create a crossfade (essentially an
    audio dissolve) from one audio clip to another.
    With the audio track(s) targeted, park the Playhead at the
    audio cut and hit Ctrl+Shift+D (or drag from the effect panel):
    You need to be sure you have sufficient 'handles'
    on both clips to accommodate the crossfade.
    Creating an audio crossfade
    http://tv.adobe.com/watch/learn-premiere-pro-cs6/creating-an-audio-crossfade/

  • How to merge audio in a clip during video editing in iMovie?

    How and tnxs for reading.
    Here the question:
    I have a video file which has a bad audio R track and a good audio L one. I would like to edit the video, standard operations like cut, merge, etc...
    However I would like to take the audio R track out. Since I do not see any available feature for this I exported the audio track to another audio software and did the operation there. After that I imported the audio L track only in my iMovie (v 10) project, aligned to the clip, I deleted the original audio from the clip, and now I have a perfect project with the original clip with a good audio track.
    However, since I would like to work now on the project itself, it'd be great to merge the audio (which is now separated) to the clip, in order to maintain the proper audio with the clip during my cut/paste/etc operations. Is there any special feature I can use for this?
    If not, I know I can export the project to a new video file and then open a new iMovie project where I can import the new video file and start again from it, but I am wondering if there is an easier way since in my opinion I had to do already to much work for an easy op like this which would have been fixed easily with the old versions of iMovie.
    Tnxs.

    Thanks for your reply!
    While your answer is helpful, it's not a desired solution for me because the comp track is one channel of a multi-channel recording (two different mics).  I don't want to drag a new take into the comp track because the comp track is grouped with other comp tracks for editing purposes, and I don't want to disturb the editing I've already done.
    It seems like I "should" be able to select a region in the arrange window and "re-link" the file to any other file in the audio bin (thereby replacing the file with the other).  After years of working in graphic layout programs, such as Adobe InDesign, I'm expecting this sort of feature to exist already.  I'm pretty sure I've seen it before... but I've used Cubase, Digital Performer, Studio One and Pro Tools, and I'm not sure where I saw it.
    Have I described what I'm looking for clearly?  I'm not sure it's coming across in what I've written.  Can Logic do this?

Maybe you are looking for