No Audio in iTunes after 10.1.1 Upgrade

After upgrading to iTunes 10.1.1, I have no Audio in iTunes for Music/Podcasts.
Audio works fine in iTunes for movies/tv shows but not music/podcasts. I validated the audio works in all other programs, Quicktime, etc.
Tried reinstalling several times, same behavior - Any thoughts?
Running Mac OS X 10.6.5

If it play video but not audio, normally is an audio codec trouble. Movies may using other codecs than your musics. Strang this happening when upgrading... You may try play the music with QuickTime, if still got no audio, than is the codec.

Similar Messages

IPhone 3Gs won't sync contacts through iTunes after 4.0.2 upgrade

I updated to OS 4.0.2 today, and since then my iPhone 3Gs will not sync contacts. All contacts have now disappeared from my phone. The group headings still show, but Contacts is empty. I performed a factory reset and restored my phone, but still no contacts. Even after repeated syncs.
I am syncing with Address Book through iTunes. I performed a one way sync each time from laptop to phone to avoid the phone overwriting my address book with zero data. I also backed up my contacts before attempting the sync, so the data still exists in Address Book, it simply won't appear in the phone.
I also tried to reset sync history - first by using iSync 'reset sync history' button, but that does not work these days as iSync does not see my iPhone. Then I tried looking for the reset sync history' button that Apple Support says can be found as follows:
"Open iTunes. From the Edit menu, choose Preferences. Click the Devices tab. Click the Reset Sync History button."
But - that button is not there!
Any ideas anyone?

Did you try to set up your phone without using the latest backup? If you can, your other backup might be damaged and not usable anymore.
How to back up your data and set up as a new device

Having trouble using PAYCLICK on itunes after I did an upgrade to ios6.1. anyone else having probs shopping??

PAYCLICK problems.. itunes not accepting the PAYCLICK account when i shop for apps. did an upgrade on the 1st feb then it stopped working. any one with any similar occurances

Kerry,
There are several different things that may be going on here. First of all, there may be an issue with power consumption. A network module (FP-1000 in this case) is designed to source up to 9 Watts of power to I/O modules. This assumes an average of 1 Watt per module. Certain modules require more than 1 Watt, most require less leaving extra power for the ones that require more. In your configuration, you may be over this depending upon how your FP-TB-10's are populated. Assuming that the TB-10 is unpopulated, your consumption is 4 * 0.35 + 2 * .25 + 2 * 0.6 + 1.7. = 3.8 Watts. Thus, the load from the Dual Channel modules may not exceed 5.2 Watts. If you are using exclusively the Dual Channel Analog Out Current modules, you will overload the power supply.
Anothe
r thing to look at is when resetting the network module, check the box that says factory configuration. After the reset, uncheck the box and then configure your channels and power-up values (edit this device on each module).
Also, there are some times when relays may get "stuck" in an on position due to extremely high inductive loading. I have not seen that happen very frequently, but it does make me wonder, what type of load are you driving on the relay channels?
The PWM module, has 12 bit resolution, and will accept values of 0% for the output duty cycle. What value for the period have you set?

Cannot boot itunes after 10.1.2 upgrade.

Hello there..I had itunes 10.1.1 running fine on my XP - apple updater told me there was a new version (10.1.2) so I upgraded...did the install and now I cannot boot itunes from desktop or anywhere else...tried uninstalling and reinstalling but no luck...no messages, no errors just...no itunes.
Do you think you can help or anyone else who reads this?

I Finally got mine working correctly. I have windows 7 64 bit. I uninstalled everything and reinstalled using the 64 bit. It works now. I don't know if the automatic update selected the 32 bit to update. I rechecked the system requirements, it looks like itunes no longer supports the 64 bit xp system--if that's what your is. I would look into that, and maybe downgrade to the olde itunes.

Audio not working after 10.6.7 upgrade?

I just upgraded to 10.6.7 and now my computer will not output audio though built in speakers? However, if I transmit audio to my airport express then there is no problem? Help?!

I had this exact problem but my internal speakers were not even listed in the sound preferences selection box. It was as if they did not even exist. I then ran 10.6.8 which triggered an unrecoverable kernel panic. The genius bar told me I now need a new logic board. That update killed my laptop.

After i Dowloaded a huge document of audio my itunes craches everytime i launch Itunes. Any tips?

After i Dowloaded a huge document of audio my itunes craches everytime i launch Itunes.
Need help Plz

After i Dowloaded a huge document of audio my itunes craches everytime i launch Itunes.
Need help Plz

My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output. Mac book Pro Lion 16gb ram

My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output. Mac book Pro Lion 16gb ram. Can be any song, any time, same song will play if I select it again. Bit of a bummer itunes is the main thing I use (macbook pro jukebox).

Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry

Distorted audio in iTunes and other apps after 10.8.4 ?

Hi
Listen. After i installed the latest 10.8.4 i have distorted audio in iTunes and other music applications.
I have tested this on 3 mac's all with the same result. distorted audio when playing loud
Anyone else got this new problem after installing 10.8.4 ?
I already filled in a bug report to Apple at https://bugreport.apple.com
We need to get this fixed NOW... Please write your situation if you discovered the same bug.
Thanks.
Have fun.
Erik

Ask on the Microsoft forums, as it's their software you're having problems with:
http://answers.microsoft.com/en-us/mac

Choppy Audio on Tracks After iTunes 8 Upgrade

All the tracks in iTunes now sound choppy. Music fades in and out, sounds scratchy, etc. This happened immediately after upgrading to iTunes 8. Anyone have any solutions?

I am experiencing scratchy audio in iTunes and I believe that it coincides with a fairly recent upgrade. I too thought it was my speakers because the distortion fits the profile or a torn cone or other mechanical speaker issue. But I eliminated everything but iTunes as the cause, since the problem persists with headphones but playing tunes directly in the Quicktime app results in clear sound. The same files sound fine on my iPod.
It is most apparent in certain frequencies, i.e. the vocals in many tracks are the most affected. On some tracks it is subtle and on others unbearable. Mp3s from eMusic, ripped CD tracks and purchased iTunes are all affected.

Creating a ringtone with iTunes (after song selection) is difficult!

Hey-
I'm having an issue with creating ringtones using the built in ringtone maker in iTunes after purchasing a eligable track from the iTunes store. There are some ringtones that I found on the iTunes store. There is one purchase where you get 6 seperate ringers (but in one audio file). I place the slider bars at the beginning of the ringer I want and then at the end of that ringer. When I go to play it back to make sure I'm getting what I want, it's not playing the correct ringer that it should be playing, but rather either the first ringer, or the 4th ringer...very odd! I know how to 'trim' clips as I do this daily with Windows Movie Maker...left slider starts at where you want the tune to start, the right slider stops at where you want the tune to end...very simple! Yet with the ringtone maker built into iTunes, it doesn't seem to work that way at all.
The tune that I am referring to is called "6 (or six) business ringtones" in iTunes (just do a search it will pop up)! It is one audio file, with 6 different ringtones in the file, the total file length is like 30 seconds (give or take). Well I like the 2nd ringtone. So after I bought the file, I then went into the ringtone maker in iTunes and dragged the slidders where the 2nd ringtone starts and ends, I then play it back but it doesn't play what I trimmed. Instead it plays other parts of the file (as in the 5th and 6th ringers or the 1st ringers or it starts playing the end of the 1st ringer and combines it into the 2nd ringer that I want. It doesn't seem to do what it's suppose to do and it's really starting to tick me off! I have all these charges from the iTunes store where I have been repeating trying to make the file because it's not working correctly and I'm getting all these charges on my credit card. All I want is for the ringtone maker to work correctly and make my tone as I'm telling it to do, but it won't. Does anyone know how to make this darn thing work correctly? If it wasn't for the file being DRM'd, I would drag it into my own program and do it myself with something I know works correctly. This clearly does not work correctly.
Any help would be appreciated.
Thanks.
Message was edited by: Scottcarterwalsh
Message was edited by: Scottcarterwalsh
Message was edited by: Scottcarterwalsh

Have you tried this:
http://www.intomobile.com/2008/10/07/iphone-ringtones-create-free-iphone-rington es-using-itunes-8.html

No audio Mac Pro after installing OS 10.7.5 Update 1163

No audio on Mac Pro after installing OS 10.7.5 Update 11G63. Tried uninstalling iTunes Dock Notifications but it wasn't installed in the first place. No Audio on iTunes, youTube, Chrome, etc.

Hello Howard,
Thank you for using Apple Support Communities.
You can use the following article to sort your your audio issues on your MacPro:
Troubleshooting issues with no audio from built-in speakers on Macs
Regards,
Jeff D.

I am not able to add video files to my itunes after installing itunes 10.7

I am not able to add video files to my itunes after installing itunes 10.7.0.21

I Have been using, Ipad for only around a month or so (Ipad 2), and it was only yesterday that i tried to use the Itunes. I first downloaded the latest itunes (10.7.0.21), and took backup of all my Ipad data.
After this, I wanted to add some video to my ipad, as it was essential to add the same to My itunes first, I roceeded to do just that. I went through this command {File - Add File to Library}, and then went on to select the Video file. There's just a flicker, and then nothing happens at all - the itune screen remains, and there is no error message too. Whereas, I can easily add Audio Files.
After this, I even downaload the latest Quick time (7.7.2), as I had read somewhere that the same is necessary. When I tried to open the Video file in Quick time, it did not open. After that I downloaded the codec DivX and DivX player. Though the Video plays in DivX, it refuses to open in Itune and does not play properly in Quicktime (slider moves, but sound and video is not there).
Frankly, I am utterly confused.
Regards, Shekhar

Loss of audio in iTunes

I started having problems with my computer's ability to playback audio in iTunes or anything related to Quicktime as soon as I installed Quicktime 7.4 and iTunes 7.6.
Current symptoms:
Scratchy or glitchy audio
No sound at all in Quicktime player
Intermittant play in iTunes (songs sometimes stall at 0:00, file format does not seem to matter nor does particular song)
Sound will drop out entirely. Then, if I plug in some headphones, the sound will return. Upon unplugging the headphones, the sound will come from the speakers but eventually become scratchy and disappear once more.
Now that I've written all that out, I'm wondering if it's even a software issue. Soundcard maybe?

I had the same issues and someone posted this in my topic
"I would try rotating through different USB ports first. If that fails, try an Open Firmware reset - that'll clear all the info for the USB and FireWire ports.
To reset Open Firmware, reboot and press and hold the Command-Option-O-F keys until the Open Firmware screen appears. At the command line prompt, type in the following exactly, pressing Return after each line:
reset-nvram
reset-all
reboot"
I switched the usb port around and it seemed to work for me. well at least for the last 15 minutes. hopefully this works for you

I've imported a giant cd collection for my work in wav format for the best quality audio using iTunes version 11.1.1. I need to transfer this library to our Music workstation using iTunes 11.0.1. That workstation version of iTunes can't be upgraded for

I've imported a giant cd collection for my boss in wav format for the best quality audio using iTunes version 11.1.1. I need to transfer this library to our Music workstation using iTunes 11.0.1. That workstation version of iTunes can't be upgraded for compatability reasons with other software using iTunes. When I try to transfer the library I lose all of the CD metadata and end up with only track names. Is there a way to transfer everything along with the metadata?

Not easily. WAV format does not store tag information in the file. Realize both AIFF (equivalent to WAV) and Apple Lossless (full quality but smaller files) do, so WAV was unfortunately the worst format to chose.
If you have to go with what you have you will have to explore exporting the library as .xml, moving it and the files to the other computer, then rebuilding a lower version library with the two sets. I am not sure if you can do it with the library.xml file that already exists or if it too differs according to version. You may end up having to export the files as a playlist. You will, of course, lose artwork too, though you can try fetching it from the iTunes Store later.
Some of what you need to do is outlined in these articles though you have the added limitation that you are not building a library of the same version. (It really is a piity you choose WAV, otherwise you could have simply added the ripped files and most of the data would have traveled with them.)
https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library after upgrade/crash from previous iTunes library file.
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451

Songs have now randomly started skipping on my itunes after a few seconds

Songs have now randomly started skipping on my itunes after a few seconds. I have gone to control pannel and used repair twice with no luck. Help?

iTunes and QuickTime for Windows: Audio does not play or plays incorrectly

No Audio in iTunes after 10.1.1 Upgrade

Similar Messages

Maybe you are looking for