No audio in Muse when I import an Edge file with sound

I'm using an Edge animation with sound effects in Muse.
In Edge all audio is playing but when I import the .oam in Muse there is no audio.
Any Suggestions?
Thanks!

Problem solved, local sounds don't work for muse. Moving the sounds folder an external url did the trick..

Similar Messages

When i import H264 .mov files the audio slows down. MAC

I have a mac, running Mavericks OSX and i'm using Premiere CC.
When I import a .mov file with h264 encoding the audio plays back very slowly.
I know that Premiere can't handle h264 in an avi wrapper or so it has been said in old forums, but these are .mov files. How has this been an issue since CS 3 and it hasn't been fixed?
I would expect an import setting could be changed to fix this but i can't seem to find any import settings.
other than transcode everything again, is there an easy fix for this?
Thank you for your help.

Are these files MPEG compressed files? iMovie can not deal with the multiplexed audio of those files. For suggestions on how to get them right start here...
http://www.danslagle.com/mac/iMovie/tips_tricks/6030.shtml
And if your files are not MPEGs, some of the suggestions on that page may still do what you need done.
Patrick

Importing flash files (with sound!) can it be done?

Hi!
I sucessfully importing a flash file but im not sure if the sound has imported with it, does anyone know if I can import a flash file with sounds or do I have to import the sound seperatly?
Helen

Helen,
After Effects can import .SWF files but unfortunately it does not recognize the audio in a .SWF file.
If it helps, AE can import .FLV files and it WILL recognize the audio in them.
Relevant Help page:
"Supported import formats"
-Troy

I am not being able to play sound when I import a .MTS file from my folder

I am not being able to play sound when I import a .MTS file from my folder on my sequence bar of my Premiere Pro CS6. Even if I use my Media Browser to import the file, the video plays fine, but the audio is disabled it seems. I don't know what to do since I have used .MTS files before without hassle on CS5.5. It is quite frustrating. What can I do?

Hi debesh05,
Please mention the Operating System that you are using and also make and model of the Camera that was used to capture those clips. Also, try to make another folder with the same name in the same location where the .MTS files are and move all the clips into the new folder and then try to import the files again using Media Browser in Premiere Pro CS6. If this doesn't work then make a copy of one file and rename it as .M2TS and then import that single file into Premiere Pro CS6. Please update if either of the solution works for you.
Regards,
Vinay

Adobe InDesign CS2 - Why does the resolution change when I import a PDF file to InDesgin

When I import a PDF file to InDesgin the resolution from the PDF changes.
Any ideas?

InDesign uses a low resolution thumbnail (might be the wrong way to descirbe, but easiest to visualise) to represent images/files placed into indesign. As InDesign is a page layout program it enhances the speed of the application as it doesn't have to draw the images in full detail, but rather just represent them in their size and position in the layout.
There are 3 viewing settings, available through the View> Display Performance (for the whole document) or Object>Display performance (on an object by object basis).
The resolution of the image from that point on relies on whether it was Vector or Raster, or in PDF and EPS cases, vector and raster. As already mentioned Vectors and PDFs don't contain a resolution. Vectors are mathematical equations that require the device outputting the image to draw them to the best of their abiltiy.
PDFs are a wrapper for a file, it can wrap text, vectors and raster for output.
But all the same, InDesign uses lo-res thumbnails to represent the PDF/Image/Object until ready to output. But you need to adjust the Display Performance.

Letters and numbers are being deleted when I import a PDF file to my catalogue

I have a business catalogue that I change from time to time. I will make the changes in MS Word 2003 and then convert the document to a PDF file. I will then import the PDF file to my catalogue. Recently when I have impurted the PDF file I have noticed that letters on pages above the inserted PDF file and letters below the inserted PDF file will be missing. I recently updated my Acrobat Reader from 8.0 to 9.0, so maybe that is an issue.

How are you converting the documents to PDF ? Are you using Acrobat, if so, which version of Acrobat?
Also, what exactly do you mean when you "import the PDF file into my catalog". Which software are you importing the PDF into?

When I import a text file(comma separated )into a numbers spread sheet all the data goes into one column. Why does the text not go into separate columns based on the commas.

When I import a text file(comma separated) into a numbers spreadsheet all the data goes into one column instead of individual columns based on the comma separators. Excel allows you to do this during the import.. Is there a way to accomplish this in numbers without opening it in Excel and the importing into Numbers.

Your user info says iPad. This is the OS X Numbers forum. Assuming you are using OS X… Be sure the file is named with a .csv suffix.
(I don't have an iPad, so I don't know the iOS answer.)

Import DV AVI Files with 5.1 Audio

To my surprise, Encore would not import DV AVI files from Premiere with 5.1 Audio. I much prefer to do my transcoding in Encore rather than in Premiere so I don't have to guess how much disk space will remain after menus and other content. Also, I think Encore transcoding is more efficient than Premiere.
Yet, cheaper and less sophisticated applications such as Nerovision will import DV AVI files with 5.1 audio, and give you 5.1 DVD's.
Which leads to another question, why does a cheaper application just give you the Dolby Digital 5.1 Audio, while a fee has to be paid to Surcode to get it in the Adobe applications?

You cannot create a 5.1 Dolby Digital file in Encore, so the answer is an emphatic "YES" to the planning & budgeting.
You really should be doing this anyway, as it is a real eye opener. There are some superb Excel spreadsheet bit budgeting tools, as well as a simple enough manual method. It should be detailed in the FAQ.
As far as DTS goes, you'll need an encoder again. The only plugin version I am aware of is for Steinberg's Nuendo & Cubase systems, but both DTS and SurCode make them.
The SurCode DTS-DVD encoder is dated now - 5 years or so - and the Nuendo one sounds better. Having said that, the DTS-PSE sounds even better, as well as having DTS-ES and DTS 96/24 capability (both of which are DVD Legal).
Even better are the soon-to-be-released DTS-HD SAS & MAS encoders.
These are primarily for the Blue-ish type discs, but also cater for so-called "legacy" encoding as well, and the detail is even better than the DTS-PSE version. You can hear the difference in the detail where the top end sounds more natural & open. Whatever version you get will make Dobly Dirgital sound dull & muddy by comparison.
Quality can be improved by feeding the encoder with 24 bit audio too - this also applies to Dolby Digital.
Bitrates for DTS are either 754 kb/sec or 1509 kb/sec, and come in 2 flavours:
Compact (.cpt) and Padded (.dts) - either can use the lower bitrate, and there is no difference in audio quality between the CPT and DTS flavours. I recommend using the higher bitrate personally.
Both types are supported in Passthrough mode in Encore - that is to say they import, and multiplex correctly but cannot be previewed.
Hope this helps.

Why do I have to sign in to use Muse when I don't have to with any other Adobe CC application?

Why do I have to sign in to use Muse when I don't have to with any other Adobe CC application?

Why do I have to sign in to use Muse when I don't have to with any other Adobe CC application?

When i import a MP3-file, it's placed under 'Podcasts' not 'Music'

When I import a certain file on my hard drive, it's placed under the 'Podcasts'-directory instead of the 'Music'-directory, which is really irritating, as I now have to go to the podcast-directory every time I want to play it.
Anyhow, the file is just like other MP3-files I got on my computer - that I am able to import without problems. It's 96kbps and .mp3-format, just like a dozen other song I just imported, and that puts themselves into the music-directory.
Why does this certain file keep putting itself in the podcast-directory, and what can I do to avoid that?

If you use iTunes' default settings then when you add a file to iTunes it places a copy of the file in the iTunes media folder and it leaves the original in place. The exception is when you drag it to the Automatically Add To iTunes folder.
It does not convert the file. You can delete the original if you wish.

How do I import a pdf file with layers into Motion 5?

In earlier version of Motion, you could import a pdf file with all layers or even select layers you wanted to import. You did this by dragging the pdf file into the project and holding it until a popup appeard providing you choices for how you wanted to complete the import. In Motion 5.0.1 however, no such popup appears and it imports the file as a flat image file. Any ideas how to change this pelase?
Thanks
Greg

Thanks Ben & Praveen. In FCP7 It was possible to import PDF files and as you did the import, make choices regarding layers you wished to import. FCPX appears to import PDFs but only as flattened files. I'll try keeping the file in PSD format and importing as you recommend.

Importing From Flat File with Dynamic Columns

HI
I am using ssis 2008,i have folder in which I have Four(4) “.txt” files each file will have 2 columns(ID, NAME). I loaded 4
files in one destination, but today I receive one more “.txt” file here we have 3 columns (ID, NAME, JOB) how can I get a message new column will receive in source. And how can I create in extra column in my destination table dynamically …please help me

Hi Sasidhar,
You need a Script Task to read the names and number of columns in the first row of the flat file each time and store it in a variable, then create a staging table dynamically based on this variable and modify the destination table definition if one ore more
new columns need to be added, and then use the staging table to load the destination table. I am afraid there is no available working script for your scenario, and you need some .NET coding experience to achieve your goal. Here is an example you can refer
to:
http://www.citagus.com/citagus/blog/importing-from-flat-file-with-dynamic-columns/
Regards,
Mike Yin
TechNet Community Support

When i convert a word file with a hyperlinks to a PDF file it doesn't work ?? thanks in advance for helping me

when i convert a word file with a hyperlinks to a PDF file it doesn't work ?? thanks in advance for helping me

using microsoft word.
the hyperlink doesn't work in the pdf file (adobe reader).
adobe reader xi.
my operating system windows 8.1.
the attached screen is appeared.

I just got a new macbook pro, i had cs6 on my old macbook, i downloaded cs6 on my new computer today. When I open my illustrator files with vector images they appear blurry on the new computer. I have had this issue in the past and I don't

i just got a new macbook pro, i had cs6 on my old macbook, i downloaded cs6 on my new computer today. When I open my illustrator files with vector images they appear blurry on the new computer. I have had this issue in the past and I don't

cnsst,
Are we talking Edit>Preferences>General>Anti-Aliased Artwork?

When I create a new file with 500px wide by 500px long it shows up on my screen as a rectangle.

When I create a new file with 500px wide by 500px long it shows up on my screen as a rectangle. When I go to Image > Image Size it still shows the image as 500 x 500 yet it is clearly not a square. This also occurs if I try to create a circle, selecting the ellipse tool a checking the box for it to make a perfect circle it shows up as an oval.
I have Photoshop CS6 on a macbook.
Any help would be appreciated, I consider myself decently knowledgeable in Photoshop and I've looked through the settings, but I can't seem to figure out the issue, it's been happening for a while now, it's not a one-time fluke thing.
Thank you.

Is your pixel aspect ration set to square? Here 500 x 500 set to 2:1 aspect ratio pixels

No audio in Muse when I import an Edge file with sound

Similar Messages

Maybe you are looking for