No Audio in Quicktime Movie taken from Camera
I have a Pentax OptioS6 and used its video capture mode. When I viewed the movie, it opened QuickTime, and then I received a message that software was missing, and was directed to the QuickTime Components web site, with several third-party components. I am not sure which one to install. Does anyone know how I should handle this issue. Without installing any software, there is no audio for the movie. In order to get audio do I have to install one of the third-party components? I already have DivX. So if this is the proper component to allow me to watch the movie with sound, do I simply use that program to open the movie?
Thanks in advance.
Russell
MPEG, Mono, 32.000 kHz is your audio and MPEG is the codec. Trouble is that doesn't tell me enough.
QuickTime can play MPEG-1 files but yours isn't because it shows DivX as the video codec. Normal MPEG-1 files are muxed (single codec and file) and your file shows two codecs.
Try playing and converting the file with MPEG Streamclip (free). It can export to QuickTime formats.
Similar Messages
-
I can no longer play quicktime mov files from a canon firestore
I can no longer play quicktime mov files from a canon firestore from an HDV camera that play on other macs and play in vlc. It happened all of a sudden. Files that I could play before no longer play. It seems to be something wrong with the quicktime codec management because the files do not play in premiere and final cut pro. In FCP it says: File Error: 1 File(s) recognized, 0 access denied, 1 unknown. These files work on other computers. I have four drives and it doesnt matter which file i attempt to open on each drive, these files are unreadable on this system. Please help. Possible issues might be a corrupted index, but i dont understand how that can go across four different drives.
Model Name: Mac Pro
Model Identifier: MacPro4,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 8 GB
4 SATA drivesApple kindly updated Quicktime and rendered Firestore files unplayable. I think a recent update of iTunes was the culprit.
Solutions: What I did. Wipe the system disc. Re-install Snow Leopard. Re-install FCP7. Don't update Quicktime or iTunes to anything after Jun 2011. QT v7.6.6 is the last good version. That'll get your files back.
A colleague tried a different approach. For this you need a pre-July 2011 version of the file QuickTimeComponents.component. It is in the system/library/QuickTime folder. Delete your current one and drop in an old one.
However if you're working with Final Cut X, I think you screwed until Focus and Apple work something out. My address is on my contacts page at teevideousadotcom if you need any further help. -
How to control audio-only QuickTime movies
I would like to be able to use the QuickTime controller to play an audio only QuickTime movie. I've read in this forum that hovering the mouse over a QuickTime movie is supposed to bring up the controller, but it isn't working for me. I've imported the movies (I have three on one slide) by both Insert > Choose … as well as dragging from the Finder. Afterwards, I get the speaker icon. When I play the show, the speaker icons don't appear.
Having the ability to be able to repeatedly play a .aif, .wav., mp3 sound would be nice as well, even if it is just start from the beginning and play.
Additionally, I'd also like to be able to play a movie by clicking on a movie, but I haven't found a way to do that. Perhaps it is not possible.
Keynote 4.0.2. Latest QuickTime (7.4).
Bobthere's no sound that will be played by that code. and there's no code about a netstream instance.
-
HT201317 How do I move photos from camera roll to photo stream
How do I move photos from camera roll to photo stream
Welcome to the Apple Community.
Photostream only adds photos taken after photostream activation, it doesn't do video at all.
To transfer photos from your camera roll taken before activation to your Mac, connect the device by USB and import your photos and videos through iPhoto. -
HT4890 Can you move photos from camera roll to photo stream?
Can you move photos from camera roll to photo stream?
Photos taken on your device (which are saved to the camera roll) after enabling photo stream are automatically added (when connected to wifi, the camera app is closed, and you have at least 20% battery power remaining). If you want to add earlier photos you'll have to either email them one by one to yourself, then open the email and save them back to your camera roll (which will now upload to photo stream because it is considered a new photo), or you can send them all at once using an app like PhotoSync. With this app you can transfer them wirelessly to your computer, then delete them from your camera roll on your phone, the send them back to the camera roll from your computer (which will again cause them to be seen as new photos). (iTunes will not transfer photos to your camera roll so you can't just import them and sync them back.)
-
How to move pics from camera role to photo stream?
How to move pics from camera role to photo stream?
before you fiddle with it you may want to back up your photos on your PC. This is how to move them from phone to PC.
How to Transfer photos from HTC memory to PC
1) From the phone: select: Menu>settings>connect to pc>as disk
2) Attach phone to pc with usb cable
3) From pc open: Computer>removable disk F>dcim>100media
Note: you can also pull the mini sd card out of you phone and plug that directly into your computer. just make sure to unmount the disk through your settings options before you remove it from the phone. -
Move photo from camera roll to user created album but photo remain in camera roll
Hi every one,
dose any one know whow to manage photo in camera album or i think apple team keep this pending. ( no cut & past ) in photos.
i want to move my personal pic or any pic to another album or new album but i found original pic remain in camera roll and shortcut will created in album, in this case if i delete photo in camera roll its going to delete from album too, dose any one know how to move photo from camera roll to new album and ( not shortcut )
i know we doint like when any one tuch our phone but some time we give it to our friend or some person to have a look for some reason or to show some photos and they start moving next and next, if all photos will be filterd as per album it give some relex.
ThanksThanks for prompt reply, I understand as im also IT ENG. and having good knowladge of SMART PHONE AND IT STUFF. maybe less than you but the point is if we need computer or laptop todo this small things than what is the use of smart phone like iPhone 5s with A7 processor if we can not make it cut past from camera roll to user created album.
not argument but want to know what is the logic behind this things.
also i know on you tube so many video on jailbrak ( i really not in favor on this and dont want ) but if found some people working on really nice idea and simple app.. if you have time just check for bioprotect its cool app.
i hope apple team soon launch something like this. -
How do I move pics from camera roll to photo stream
How do I move pics from camera roll to photo stream?
Also, iTunes on MacBook says phone is locked. It is not.Not really....I just took pics on my ipone yesterday amd they are stored in camera roll...not photostream. All my software is up to date. Unless I am not seeing something here...this is an annoying bug.
-
How do i move photos from Camera roll to My photo stream on i4s
how do i move photos from Camera Roll to My photo Stream and then make sure all photos go strait to my photo stream
Hi Bobnbo,
Welcome to Apple Support Communities.
It sounds like you want the photos in your Camera Roll to be moved to My Photo Stream. The article linked below answers a lot of frequently asked questions about My Photo Stream, it should answer your question and give you some other general information you may be interested in also.
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/HT4486
When do photos upload to My Photo Stream?
When you turn on My Photo Stream on your devices, all new photos you take or import to those devices will automatically push to your photo stream.
iOS devices: New photos that you take automatically upload to your photo stream when you leave the Camera app and connect to Wi-Fi. My Photo Stream doesn't push photos over cellular connections.
Macs: Any new photos you import to iPhoto or Aperture automatically upload when you connect to Wi-Fi or Ethernet. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream upload.
PC with iCloud Control Panel 2.1 or later: Open a Windows Explorer window and, under Favorites, select iCloud Photos if you're using iCloud Control Panel 3.0 or later (or Photo Stream if you're using 2.1 to 2.1.3). Open My Photo Stream. Click the Add photos button. Select the photos to import to My Photo Stream, then click Open.
I hope this helps.
-Jason -
Why can't I stream quicktime movie clips from mac book to apple tv
I have converted old analog camcorder video to .dv format and futher to .mov when opening and viewing in QuickTime. I recently purchased a new 1020 Apple TV device in hopes of viewing these movies in a wireless fashion on our Samsung Smart big screen TV. I am able to play these movies through a Lightning to HDMI adaptor, however, I am having no success in streaming these movies through AirPlay. The files appear to be too large to load and play. What to do? Thanks in advance, Jon
I suspect there isn't any need to convert from the QuickTime format. The Apple TV is quite capable of playing QuickTime movies, just not all of them. QuickTime movies (.mov) come in many shapes and sizes but have one thing in common, "the container", the container holds all the various types of video, audio and sometimes some other stuff.
Providing the contents of the container can be played by the Apple TV, the Apple TV will play the QuickTime movie. The audio profile, dimensions, data rate and video codec as posted by the OP are all compatible with the Apple TV.
.mov containers containing contents that can't be played by the Apple TV, can't be played by the Apple TV. The file in the page you linked to contains video that uses the 3ivx codec which is why it needs converting.
The OP's issue is either that the file is corrupt or that they have a problem on their network, hence why we need to ascertain whether the Apple TV will play content that we know should work. -
Quicktime movie export from Flash CS3 is skipping frame.
When I try to export Quicktime movie from Flash CS3, the
resulting mov file is skipping frames. i.e.: The movie is showing
frame number 1, 2, 3, 4, 5, 6, 7, 7, 7, 10, 11, 12, 12, 12, 15
etc...
As you can see the frame number 7 is repeated 3 times and
frame 8 and 9 are nowhere to be found.
The last configuration I used is 960x540, Sorenson video 3
medium quality, 25 fps, keyframe every 25 frames. 6400 kbits/s.
I tried various configurations,with different codecs and even
with keyframe all frames and I always get simillar problems.
Anyone have an idea what is going on, and how to fix this?
Thank you,
Olivier.The QT exporter in Flash is honestly my least favorite
feature - not the feature itself but how it
works (or how it doesn't work in some cases). For me it is
almost unusable unless you have a very
short timeline, small stage, lower frame rate - like AS
generated effects or something - otherwise,
for true frame accuracy to video output - it is not reliable
enough and not fast enough for any real
world production environment.
So typically for me - I love SWF2Video (www.flashants.com) as
it takes any SWF and makes it into an
AVI that is frame accurate no matter what the frame rate is -
quite incredible - enough so that I
always felt it should have been bundled with Flash (as well
as Wacom tablets).
Harmony is an incredible product - as is SOLO and TBS (Toon
Boom mStudio) - each of those programs
are dedicated animation programs designed for output to video
- Flash has a lot of hats to fill and
it was never really designed for animation to video even
though many of us have found it suitable
for all intents and purposes as an animation program for full
production.
But all in all - the quicktime exporter doesn't really
deliver how we would expect it too I am sorry
to say - I only hope it works as well as it does on the Mac
(Mac users could always choose to export
to Quicktime Video but not PC users).
For now if I am exporting to video I keep it all on the
timeline or nested in Graphic symbols or use
the SWF2Video tool.
hope this helps.
-chris
Chris Georgenes / mudbubble.com / keyframer.com / Adobe
Community Expert
OBastien wrote:
> Thank you for your reply Chris.
>
> I tried different possible solutions you listed but it's
not working.
> Disabling sound had no effects. Changing the FPS is not
an option, it has to be
> 25 FPS. I lowered the resolution to 300 something, it
seemed to be a little bit
> better, but it still dropped some frame, and the image
quality was horrible.
>
> I think it is really sad that we have to try different
settings in the hope
> that flash will grab all the frames. I'm really
disapointed in Adobe. I'm
> pretty sure it is the fault of Adobe and not Apple,
because I don't have does
> problems with Quicktime in ToonBoom Harmony. What is
strange is when I do an
> AVI export I never noticed a dropped frame. I'm not
using AVI video right now
> because I can not find a codec that gives me small size,
fast encoding times,
> the ability to seek in the movie by dragging the
timeline progress bar, and the
> possibility to edit in After Effects. If you know an AVI
codec that does all
> that it would be really great news.
>
> Thank you again,
> Olivier.
> -
Making a Quicktime movie clip from non-commercial DVD
I want to capture a five minute clip of video from a non-commercial (i.e. homemade) DVD and save as a Quicktime movie. How do I go about this?
You will need QuickTime Pro and the Viewer, both available for purchase from the Apple Store. One word of caution, when I try to pull video from my home-made DVDs, QT only play the first 2 to 6 seconds of the video that may be almost an hour long. I am trying to find a solution, but before I would recommend that you spend the $50 to purchase Pro and Viewer, I would wait until there is some resolution to this problem.
-
How to move picture from camera roll to existing album
would like to organise photo albums but am struggling to move from camera roll to existing album without using laptop
Choose Select at the upper right, select some photos, choose "Add To" at the upper left, and then select the album you wish to move the photos to.
Note that you can only move photos to albums that you created on the iPad. Also note that the photo will remain in the Camera Roll, only a pointer to the photo is moved to the album. -
Quicktime movies compress from HD to TV Ratio when writing DVD
I'm using version iDVD 7 (sorry...no forum for v.7 ???).
Using "ONE STEP DVD from MOVIE" feature to convert a Quicktime Movie that was created in Final Cut Express into a DVD. The item properties in FCE are letterbox 1920x1080. After writing DVD, the image on the screen is compressed to TV ratio. QUESTION #1: How do I avoid this and QUESTION #2: There's probably a better software app for making DVDs from FCE...what do you suggest? Many thanks!!!Hello again...I have some conflicts in the information provided and the links to others therein.
Article TS1611 mentions to save in 854x480 NTSC, but there's no option to that ratio...in either HD or other formats. The other direction to use the specific compression is something that I was not doing. I was going with the default...so Article TS1611 is a hybrid solution at this point.
The second link suggestion takes me into iDVD's themes...which I do not use. I only want the player without all the graphic stuff. That's why I go to FILE>"One step DVD from Movie".
The other mention within an article suggested using a program that "amorphs" the file during stamping. This user had a file that when exported from FCE was not in the 16:9 ration. Mine are in the 16:9 ratio in HD and then in changes the ratio to 4:3 when writing the DVD within iDVD.
So all seems to be correct, then the DVD plays in TV ratio.
Thanks again in advance! -
I have a problem with Quicktime Player version 10.1. After using Lion for a few days, I noticed that an entire folder of my Quicktime movies now play without audio. If I stop and start the movie, the audio momentarily comes through for a split second, so the sound is there, and will come through, but not during play. Video files in my other folders all played fine. Then unexpectedly, a few days later, the first folder of video files played with audio just fine. But I have another folder of Quicktime Movie files that now has the same problem. WMV and MPG files play fine in Quicktime. Any ideas what to do about this intermittant problem?
Thanks for the reply.
I do not have Perian, but I have Flip4Mac installed. But the problem is primarily with QuickTime Movie files, not MPEG, AVI, MP4 files.
An entire folder of Quicktime Movie files play, but without audio, then a few days later, they all play fine including the audio track. At the same time, on the same day, another folder of Quicktime Movie files will play just fine.
Then a few days later, every movie file on the computer played just fine with both video and audio.
Very strange. Never had a problem like this.
Wonder if it has anything to do with the automatic backups that Lion does that may tie up memory needed to play the audio?
Maybe you are looking for
-
E51 address book data access via Bluetooth to Garm...
I have a new E51 but cannot access address book data via Bluetooth from a Garmin Sat Nav (model 310). Worked perfectly with old Nokia 6310, but returns a 'no can do' message when using the E51. Lack of this feature is a big problem - surely Bluetooth
-
My iPhone 4 + iOS 4.2 = iBrick
Upgrading to 4.2 from 4.1_8B117 (the last version with no jailbreak) in a MacBook Pro with all patches (including the last version of iTunes). iTunes alert me that an "unknown error (10)" has been reported (even if I try to restore). I've deleted the
-
Adobe's Photoshop Express looks very cool... unfortunately I found this lovely bit of info on Adobe's policy of image "ownership". Geez it's sickening... https://www.photoshop.com/express/terms.html 8. Use of Your Content. Adobe does not claim owners
-
When I drag it per the installation window the popup error says "The operation cannot be completed because you do not have sufficient privileges for some of the items." I have a macbook pro (unibody) running OX 10.5.8. I AM the administrator. It just
-
LabVIEW upgrade caused freeze in multiple-instrument GPIB system
I'm using a GPIB system (1 card, 3 instruments on 1 bus), and it worked fine on LabVIEW 5.x but the upgrade to LabVIEW 6 causes the entire system to lock. Two of the instruments work fine together, and the third works fine on its own, but when they'r